This page combines common gotchas and Information which are exchange-specific and most likely don't apply to other exchanges.
+| Exchange | +Mode | +Margin mode | +Stoploss type | +
|---|---|---|---|
| Binance | +spot | ++ | limit | +
| Binance | +futures | +isolated, cross | +market, limit | +
| Bingx | +spot | ++ | market, limit | +
| Bitmart | +spot | ++ | ❌ (not supported) | +
| Bybit | +spot | ++ | ❌ (not supported) | +
| Bybit | +futures | +isolated | +market, limit | +
| Gate.io | +spot | ++ | limit | +
| Gate.io | +futures | +isolated | +limit | +
| HTX | +spot | ++ | limit | +
| Hyperliquid | +spot | ++ | ❌ (not supported) | +
| Hyperliquid | +futures | +isolated | +limit | +
| Kraken | +spot | ++ | market, limit | +
| OKX | +spot | ++ | limit | +
| OKX | +futures | +isolated | +limit | +
| Bitvavo | +spot | ++ | ❌ (not supported) | +
| Kucoin | +spot | ++ | market, limit | +
Freqtrade is based on CCXT library that supports over 100 cryptocurrency exchange markets and trading APIs. The complete up-to-date list can be found in the diff --git a/en/develop/index.html b/en/develop/index.html index 958a6a3d1..ed07a7961 100644 --- a/en/develop/index.html +++ b/en/develop/index.html @@ -1958,7 +1958,7 @@
This section will highlight a few projects from members of the community.
Note
-The projects below are for the most part not maintained by the freqtrade , therefore use your own caution before using them.
+The projects below are for the most part not maintained by the freqtrade team, therefore use your own caution before using them.
Star Fork Download
"},{"location":"#introduction","title":"Introduction","text":"Freqtrade is a free and open source crypto trading bot written in Python. It is designed to support all major exchanges and be controlled via Telegram or webUI. It contains backtesting, plotting and money management tools as well as strategy optimization by machine learning.
DISCLAIMER
This software is for educational purposes only. Do not risk money which you are afraid to lose. USE THE SOFTWARE AT YOUR OWN RISK. THE AUTHORS AND ALL AFFILIATES ASSUME NO RESPONSIBILITY FOR YOUR TRADING RESULTS.
Always start by running a trading bot in Dry-run and do not engage money before you understand how it works and what profit/loss you should expect.
We strongly recommend you to have basic coding skills and Python knowledge. Do not hesitate to read the source code and understand the mechanisms of this bot, algorithms and techniques implemented in it.
"},{"location":"#features","title":"Features","text":"Please read the exchange specific notes to learn about eventual, special configurations needed for each exchange.
Please make sure to read the exchange specific notes, as well as the trading with leverage documentation before diving in.
"},{"location":"#community-tested","title":"Community tested","text":"Exchanges confirmed working by the community:
This section will highlight a few projects from members of the community.
Note
The projects below are for the most part not maintained by the freqtrade , therefore use your own caution before using them.
To run this bot we recommend you a linux cloud instance with a minimum of:
Alternatively
For any questions not covered by the documentation or for further information about the bot, or to simply engage with like-minded individuals, we encourage you to join the Freqtrade discord server.
"},{"location":"#ready-to-try","title":"Ready to try?","text":"Begin by reading the installation guide for docker (recommended), or for installation without docker.
"},{"location":"advanced-backtesting/","title":"Advanced Backtesting Analysis","text":""},{"location":"advanced-backtesting/#analyze-the-buyentry-and-sellexit-tags","title":"Analyze the buy/entry and sell/exit tags","text":"It can be helpful to understand how a strategy behaves according to the buy/entry tags used to mark up different buy conditions. You might want to see more complex statistics about each buy and sell condition above those provided by the default backtesting output. You may also want to determine indicator values on the signal candle that resulted in a trade opening.
Note
The following buy reason analysis is only available for backtesting, not hyperopt.
We need to run backtesting with the --export option set to signals to enable the exporting of signals and trades:
freqtrade backtesting -c <config.json> --timeframe <tf> --strategy <strategy_name> --timerange=<timerange> --export=signals\nThis will tell freqtrade to output a pickled dictionary of strategy, pairs and corresponding DataFrame of the candles that resulted in entry and exit signals. Depending on how many entries your strategy makes, this file may get quite large, so periodically check your user_data/backtest_results folder to delete old exports.
Before running your next backtest, make sure you either delete your old backtest results or run backtesting with the --cache none option to make sure no cached results are used.
If all goes well, you should now see a backtest-result-{timestamp}_signals.pkl and backtest-result-{timestamp}_exited.pkl files in the user_data/backtest_results folder.
To analyze the entry/exit tags, we now need to use the freqtrade backtesting-analysis command with --analysis-groups option provided with space-separated arguments:
freqtrade backtesting-analysis -c <config.json> --analysis-groups 0 1 2 3 4 5\nThis command will read from the last backtesting results. The --analysis-groups option is used to specify the various tabular outputs showing the profit of each group or trade, ranging from the simplest (0) to the most detailed per pair, per buy and per sell tag (4):
More options are available by running with the -h option.
By default, backtesting-analysis processes the most recent backtest results in the user_data/backtest_results directory. If you want to analyze results from an earlier backtest, use the --backtest-filename option to specify the desired file. This lets you revisit and re-analyze historical backtest outputs at any time by providing the filename of the relevant backtest result:
freqtrade backtesting-analysis -c <config.json> --timeframe <tf> --strategy <strategy_name> --timerange <timerange> --export signals --backtest-filename backtest-result-2025-03-05_20-38-34.zip\nYou should see some output similar to below in the logs with the name of the timestamped filename that was exported:
2022-06-14 16:28:32,698 - freqtrade.misc - INFO - dumping json to \"mystrat_backtest-2022-06-14_16-28-32.json\"\nYou can then use that filename in backtesting-analysis:
freqtrade backtesting-analysis -c <config.json> --backtest-filename=mystrat_backtest-2022-06-14_16-28-32.json\nTo use a result from a different results directory, you can use --backtest-directory to specify the directory
freqtrade backtesting-analysis -c <config.json> --backtest-directory custom_results/ --backtest-filename mystrat_backtest-2022-06-14_16-28-32.json\nTo show only certain buy and sell tags in the displayed output, use the following two options:
--enter-reason-list : Space-separated list of enter signals to analyse. Default: \"all\"\n--exit-reason-list : Space-separated list of exit signals to analyse. Default: \"all\"\nFor example:
freqtrade backtesting-analysis -c <config.json> --analysis-groups 0 2 --enter-reason-list enter_tag_a enter_tag_b --exit-reason-list roi custom_exit_tag_a stop_loss\nThe real power of freqtrade backtesting-analysis comes from the ability to print out the indicator values present on signal candles to allow fine-grained investigation and tuning of buy signal indicators. To print out a column for a given set of indicators, use the --indicator-list option:
freqtrade backtesting-analysis -c <config.json> --analysis-groups 0 2 --enter-reason-list enter_tag_a enter_tag_b --exit-reason-list roi custom_exit_tag_a stop_loss --indicator-list rsi rsi_1h bb_lowerband ema_9 macd macdsignal\nThe indicators have to be present in your strategy's main DataFrame (either for your main timeframe or for informative timeframes) otherwise they will simply be ignored in the script output.
Indicator List
The indicator values will be displayed for both entry and exit points. If --indicator-list all is specified, only the indicators at the entry point will be shown to avoid excessively large lists, which could occur depending on the strategy.
There are a range of candle and trade-related fields that are included in the analysis so are automatically accessible by including them on the indicator-list, and these include:
freqtrade backtesting-analysis -c user_data/config.json --analysis-groups 0 --indicator-list chikou_span tenkan_sen \nIn this example, we aim to display the chikou_span and tenkan_sen indicator values at both the entry and exit points of trades.
A sample output for indicators might look like this:
pair open_date enter_reason exit_reason chikou_span (entry) tenkan_sen (entry) chikou_span (exit) tenkan_sen (exit) DOGE/USDT 2024-07-06 00:35:00+00:00 exit_signal 0.105 0.106 0.105 0.107 BTC/USDT 2024-08-05 14:20:00+00:00 roi 54643.440 51696.400 54386.000 52072.010As shown in the table, chikou_span (entry) represents the indicator value at the time of trade entry, while chikou_span (exit) reflects its value at the time of exit. This detailed view of indicator values enhances the analysis.
The (entry) and (exit) suffixes are added to indicators to distinguish the values at the entry and exit points of the trade.
Trade-wide Indicators
Certain trade-wide indicators do not have the (entry) or (exit) suffix. These indicators include: pair, stake_amount, max_stake_amount, amount, open_date, close_date, open_rate, close_rate, fee_open, fee_close, trade_duration, profit_ratio, profit_abs, exit_reason,initial_stop_loss_abs, initial_stop_loss_ratio, stop_loss_abs, stop_loss_ratio, min_rate, max_rate, is_open, enter_tag, leverage, is_short, open_timestamp, close_timestamp and orders
The --indicator-list option, by default, displays indicator values for both entry and exit signals. To filter the indicator values exclusively for entry signals, you can use the --entry-only argument. Similarly, to display indicator values only at exit signals, use the --exit-only argument.
Example: Display indicator values at entry signals:
freqtrade backtesting-analysis -c user_data/config.json --analysis-groups 0 --indicator-list chikou_span tenkan_sen --entry-only\nExample: Display indicator values at exit signals:
freqtrade backtesting-analysis -c user_data/config.json --analysis-groups 0 --indicator-list chikou_span tenkan_sen --exit-only\nNote
When using these filters, the indicator names will not be suffixed with (entry) or (exit).
To show only trades between dates within your backtested timerange, supply the usual timerange option in YYYYMMDD-[YYYYMMDD] format:
--timerange : Timerange to filter output trades, start date inclusive, end date exclusive. e.g. 20220101-20221231\nFor example, if your backtest timerange was 20220101-20221231 but you only want to output trades in January:
freqtrade backtesting-analysis -c <config.json> --timerange 20220101-20220201\nUse the --rejected-signals option to print out rejected signals.
freqtrade backtesting-analysis -c <config.json> --rejected-signals\nSome of the tabular outputs can become large, so printing them out to the terminal is not preferable. Use the --analysis-to-csv option to disable printing out of tables to standard out and write them to CSV files.
freqtrade backtesting-analysis -c <config.json> --analysis-to-csv\nBy default this will write one file per output table you specified in the backtesting-analysis command, e.g.
freqtrade backtesting-analysis -c <config.json> --analysis-to-csv --rejected-signals --analysis-groups 0 1\nThis will write to user_data/backtest_results:
To override where the files will be written, also specify the --analysis-csv-path option.
freqtrade backtesting-analysis -c <config.json> --analysis-to-csv --analysis-csv-path another/data/path/\nThis page explains some advanced Hyperopt topics that may require higher coding skills and Python knowledge than creation of an ordinal hyperoptimization class.
"},{"location":"advanced-hyperopt/#creating-and-using-a-custom-loss-function","title":"Creating and using a custom loss function","text":"To use a custom loss function class, make sure that the function hyperopt_loss_function is defined in your custom hyperopt loss class. For the sample below, you then need to add the command line parameter --hyperopt-loss SuperDuperHyperOptLoss to your hyperopt call so this function is being used.
A sample of this can be found below, which is identical to the Default Hyperopt loss implementation. A full sample can be found in userdata/hyperopts.
from datetime import datetime\nfrom typing import Any, Dict\n\nfrom pandas import DataFrame\n\nfrom freqtrade.constants import Config\nfrom freqtrade.optimize.hyperopt import IHyperOptLoss\n\nTARGET_TRADES = 600\nEXPECTED_MAX_PROFIT = 3.0\nMAX_ACCEPTED_TRADE_DURATION = 300\n\nclass SuperDuperHyperOptLoss(IHyperOptLoss):\n \"\"\"\n Defines the default loss function for hyperopt\n \"\"\"\n\n @staticmethod\n def hyperopt_loss_function(\n *,\n results: DataFrame,\n trade_count: int,\n min_date: datetime,\n max_date: datetime,\n config: Config,\n processed: dict[str, DataFrame],\n backtest_stats: dict[str, Any],\n starting_balance: float,\n **kwargs,\n ) -> float:\n \"\"\"\n Objective function, returns smaller number for better results\n This is the legacy algorithm (used until now in freqtrade).\n Weights are distributed as follows:\n * 0.4 to trade duration\n * 0.25: Avoiding trade loss\n * 1.0 to total profit, compared to the expected value (`EXPECTED_MAX_PROFIT`) defined above\n \"\"\"\n total_profit = results['profit_ratio'].sum()\n trade_duration = results['trade_duration'].mean()\n\n trade_loss = 1 - 0.25 * exp(-(trade_count - TARGET_TRADES) ** 2 / 10 ** 5.8)\n profit_loss = max(0, 1 - total_profit / EXPECTED_MAX_PROFIT)\n duration_loss = 0.4 * min(trade_duration / MAX_ACCEPTED_TRADE_DURATION, 1)\n result = trade_loss + profit_loss + duration_loss\n return result\nCurrently, the arguments are:
results: DataFrame containing the resulting trades. The following columns are available in results (corresponds to the output-file of backtesting when used with --export trades): pair, profit_ratio, profit_abs, open_date, open_rate, fee_open, close_date, close_rate, fee_close, amount, trade_duration, is_open, exit_reason, stake_amount, min_rate, max_rate, stop_loss_ratio, stop_loss_abstrade_count: Amount of trades (identical to len(results))min_date: Start date of the timerange usedmin_date: End date of the timerange usedconfig: Config object used (Note: Not all strategy-related parameters will be updated here if they are part of a hyperopt space).processed: Dict of Dataframes with the pair as keys containing the data used for backtesting.backtest_stats: Backtesting statistics using the same format as the backtesting file \"strategy\" substructure. Available fields can be seen in generate_strategy_stats() in optimize_reports.py.starting_balance: Starting balance used for backtesting.This function needs to return a floating point number (float). Smaller numbers will be interpreted as better results. The parameters and balancing for this is up to you.
Note
This function is called once per epoch - so please make sure to have this as optimized as possible to not slow hyperopt down unnecessarily.
*args and **kwargs
Please keep the arguments *args and **kwargs in the interface to allow us to extend this interface in the future.
To override a pre-defined space (roi_space, generate_roi_table, stoploss_space, trailing_space, max_open_trades_space), define a nested class called Hyperopt and define the required spaces as follows:
from freqtrade.optimize.space import Categorical, Dimension, Integer, SKDecimal\n\nclass MyAwesomeStrategy(IStrategy):\n class HyperOpt:\n # Define a custom stoploss space.\n def stoploss_space():\n return [SKDecimal(-0.05, -0.01, decimals=3, name='stoploss')]\n\n # Define custom ROI space\n def roi_space() -> List[Dimension]:\n return [\n Integer(10, 120, name='roi_t1'),\n Integer(10, 60, name='roi_t2'),\n Integer(10, 40, name='roi_t3'),\n SKDecimal(0.01, 0.04, decimals=3, name='roi_p1'),\n SKDecimal(0.01, 0.07, decimals=3, name='roi_p2'),\n SKDecimal(0.01, 0.20, decimals=3, name='roi_p3'),\n ]\n\n def generate_roi_table(params: Dict) -> dict[int, float]:\n\n roi_table = {}\n roi_table[0] = params['roi_p1'] + params['roi_p2'] + params['roi_p3']\n roi_table[params['roi_t3']] = params['roi_p1'] + params['roi_p2']\n roi_table[params['roi_t3'] + params['roi_t2']] = params['roi_p1']\n roi_table[params['roi_t3'] + params['roi_t2'] + params['roi_t1']] = 0\n\n return roi_table\n\n def trailing_space() -> List[Dimension]:\n # All parameters here are mandatory, you can only modify their type or the range.\n return [\n # Fixed to true, if optimizing trailing_stop we assume to use trailing stop at all times.\n Categorical([True], name='trailing_stop'),\n\n SKDecimal(0.01, 0.35, decimals=3, name='trailing_stop_positive'),\n # 'trailing_stop_positive_offset' should be greater than 'trailing_stop_positive',\n # so this intermediate parameter is used as the value of the difference between\n # them. The value of the 'trailing_stop_positive_offset' is constructed in the\n # generate_trailing_params() method.\n # This is similar to the hyperspace dimensions used for constructing the ROI tables.\n SKDecimal(0.001, 0.1, decimals=3, name='trailing_stop_positive_offset_p1'),\n\n Categorical([True, False], name='trailing_only_offset_is_reached'),\n ]\n\n # Define a custom max_open_trades space\n def max_open_trades_space(self) -> List[Dimension]:\n return [\n Integer(-1, 10, name='max_open_trades'),\n ]\nNote
All overrides are optional and can be mixed/matched as necessary.
"},{"location":"advanced-hyperopt/#dynamic-parameters","title":"Dynamic parameters","text":"Parameters can also be defined dynamically, but must be available to the instance once the bot_start() callback has been called.
class MyAwesomeStrategy(IStrategy):\n\n def bot_start(self, **kwargs) -> None:\n self.buy_adx = IntParameter(20, 30, default=30, optimize=True)\n\n # ...\nWarning
Parameters created this way will not show up in the list-strategies parameter count.
You can define your own optuna sampler for Hyperopt by implementing generate_estimator() in the Hyperopt subclass.
class MyAwesomeStrategy(IStrategy):\n class HyperOpt:\n def generate_estimator(dimensions: List['Dimension'], **kwargs):\n return \"NSGAIIISampler\"\nPossible values are either one of \"NSGAIISampler\", \"TPESampler\", \"GPSampler\", \"CmaEsSampler\", \"NSGAIIISampler\", \"QMCSampler\" (Details can be found in the optuna-samplers documentation), or \"an instance of a class that inherits from optuna.samplers.BaseSampler\".
Some research will be necessary to find additional Samplers (from optunahub) for example.
Note
While custom estimators can be provided, it's up to you as User to do research on possible parameters and analyze / understand which ones should be used. If you're unsure about this, best use one of the Defaults (\"NSGAIIISampler\" has proven to be the most versatile) without further parameters.
AutoSampler from Optunahub AutoSampler docs
Install the necessary dependencies
pip install optunahub cmaes torch scipy\ngenerate_estimator() in your strategy # ...\nfrom freqtrade.strategy.interface import IStrategy\nfrom typing import List\nimport optunahub\n# ... \n\nclass my_strategy(IStrategy):\n class HyperOpt:\n def generate_estimator(dimensions: List[\"Dimension\"], **kwargs):\n if \"random_state\" in kwargs.keys():\n return optunahub.load_module(\"samplers/auto_sampler\").AutoSampler(seed=kwargs[\"random_state\"])\n else:\n return optunahub.load_module(\"samplers/auto_sampler\").AutoSampler()\nObviously the same approach will work for all other Samplers optuna supports.
"},{"location":"advanced-hyperopt/#space-options","title":"Space options","text":"For the additional spaces, scikit-optimize (in combination with Freqtrade) provides the following space types:
Categorical - Pick from a list of categories (e.g. Categorical(['a', 'b', 'c'], name=\"cat\"))Integer - Pick from a range of whole numbers (e.g. Integer(1, 10, name='rsi'))SKDecimal - Pick from a range of decimal numbers with limited precision (e.g. SKDecimal(0.1, 0.5, decimals=3, name='adx')). Available only with freqtrade.Real - Pick from a range of decimal numbers with full precision (e.g. Real(0.1, 0.5, name='adx')You can import all of these from freqtrade.optimize.space, although Categorical, Integer and Real are only aliases for their corresponding scikit-optimize Spaces. SKDecimal is provided by freqtrade for faster optimizations.
from freqtrade.optimize.space import Categorical, Dimension, Integer, SKDecimal, Real # noqa\nSKDecimal vs. Real
We recommend to use SKDecimal instead of the Real space in almost all cases. While the Real space provides full accuracy (up to ~16 decimal places) - this precision is rarely needed, and leads to unnecessary long hyperopt times.
Assuming the definition of a rather small space (SKDecimal(0.10, 0.15, decimals=2, name='xxx')) - SKDecimal will have 5 possibilities ([0.10, 0.11, 0.12, 0.13, 0.14, 0.15]).
A corresponding real space Real(0.10, 0.15 name='xxx') on the other hand has an almost unlimited number of possibilities ([0.10, 0.010000000001, 0.010000000002, ... 0.014999999999, 0.01500000000]).
This guide walks you through utilizing public trade data for advanced orderflow analysis in Freqtrade.
Experimental Feature
The orderflow feature is currently in beta and may be subject to changes in future releases. Please report any issues or feedback on the Freqtrade GitHub repository. It's also currently not been tested with freqAI - and combining these two features is considered out of scope at this point.
Performance
Orderflow requires raw trades data. This data is rather large, and can cause a slow initial startup, when freqtrade needs to download the trades data for the last X candles. Additionally, enabling this feature will cause increased memory usage. Please ensure to have sufficient resources available.
"},{"location":"advanced-orderflow/#getting-started","title":"Getting Started","text":""},{"location":"advanced-orderflow/#enable-public-trades","title":"Enable Public Trades","text":"In your config.json file, set the use_public_trades option to true under the exchange section.
\"exchange\": {\n ...\n \"use_public_trades\": true,\n}\nDefine your desired settings for orderflow processing within the orderflow section of config.json. Here, you can adjust factors like:
cache_size: How many previous orderflow candles are saved into cache instead of calculated every new candlemax_candles: Filter how many candles would you like to get trades data for.scale: This controls the price bin size for the footprint chart.stacked_imbalance_range: Defines the minimum consecutive imbalanced price levels required for consideration.imbalance_volume: Filters out imbalances with volume below this threshold.imbalance_ratio: Filters out imbalances with a ratio (difference between ask and bid volume) lower than this value.\"orderflow\": {\n \"cache_size\": 1000, \n \"max_candles\": 1500, \n \"scale\": 0.5, \n \"stacked_imbalance_range\": 3, // needs at least this amount of imbalance next to each other\n \"imbalance_volume\": 1, // filters out below\n \"imbalance_ratio\": 3 // filters out ratio lower than\n },\nTo download historical trade data for backtesting, use the --dl-trades flag with the freqtrade download-data command.
freqtrade download-data -p BTC/USDT:USDT --timerange 20230101- --trading-mode futures --timeframes 5m --dl-trades\nData availability
Not all exchanges provide public trade data. For supported exchanges, freqtrade will warn you if public trade data is not available if you start downloading data with the --dl-trades flag.
Once activated, several new columns become available in your dataframe:
dataframe[\"trades\"] # Contains information about each individual trade.\ndataframe[\"orderflow\"] # Represents a footprint chart dict (see below)\ndataframe[\"imbalances\"] # Contains information about imbalances in the order flow.\ndataframe[\"bid\"] # Total bid volume \ndataframe[\"ask\"] # Total ask volume\ndataframe[\"delta\"] # Difference between ask and bid volume.\ndataframe[\"min_delta\"] # Minimum delta within the candle\ndataframe[\"max_delta\"] # Maximum delta within the candle\ndataframe[\"total_trades\"] # Total number of trades\ndataframe[\"stacked_imbalances_bid\"] # List of price levels of stacked bid imbalance range beginnings\ndataframe[\"stacked_imbalances_ask\"] # List of price levels of stacked ask imbalance range beginnings\nYou can access these columns in your strategy code for further analysis. Here's an example:
def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # Calculating cumulative delta\n dataframe[\"cum_delta\"] = cumulative_delta(dataframe[\"delta\"])\n # Accessing total trades\n total_trades = dataframe[\"total_trades\"]\n ...\n\ndef cumulative_delta(delta: Series):\n cumdelta = delta.cumsum()\n return cumdelta\ndataframe[\"orderflow\"])","text":"This column provides a detailed breakdown of buy and sell orders at different price levels, offering valuable insights into order flow dynamics. The scale parameter in your configuration determines the price bin size for this representation
The orderflow column contains a dict with the following structure:
{\n \"price\": {\n \"bid_amount\": 0.0,\n \"ask_amount\": 0.0,\n \"bid\": 0,\n \"ask\": 0,\n \"delta\": 0.0,\n \"total_volume\": 0.0,\n \"total_trades\": 0\n }\n}\nscale intervalsbid_amount: Total volume bought at each price level.ask_amount: Total volume sold at each price level.bid: Number of buy orders at each price level.ask: Number of sell orders at each price level.delta: Difference between ask and bid volume at each price level.total_volume: Total volume (ask amount + bid amount) at each price level.total_trades: Total number of trades (ask + bid) at each price level.By leveraging these features, you can gain valuable insights into market sentiment and potential trading opportunities based on order flow analysis.
"},{"location":"advanced-orderflow/#raw-trades-data-dataframetrades","title":"Raw trades data (dataframe[\"trades\"])","text":"List with the individual trades that occurred during the candle. This data can be used for more granular analysis of order flow dynamics.
Each individual entry contains a dict with the following keys:
timestamp: Timestamp of the trade.date: Date of the trade.price: Price of the trade.amount: Volume of the trade.side: Buy or sell.id: Unique identifier for the trade.cost: Total cost of the trade (price * amount).dataframe[\"imbalances\"])","text":"This column provides a dict with information about imbalances in the order flow. An imbalance occurs when there is a significant difference between the ask and bid volume at a given price level.
Each row looks as follows - with price as index, and the corresponding bid and ask imbalance values as columns
{\n \"price\": {\n \"bid_imbalance\": False,\n \"ask_imbalance\": False\n }\n}\nThis page explains some advanced tasks and configuration options that can be performed after the bot installation and may be uselful in some environments.
If you do not know what things mentioned here mean, you probably do not need it.
"},{"location":"advanced-setup/#running-multiple-instances-of-freqtrade","title":"Running multiple instances of Freqtrade","text":"This section will show you how to run multiple bots at the same time, on the same machine.
"},{"location":"advanced-setup/#things-to-consider","title":"Things to consider","text":"In order to keep track of your trades, profits, etc., freqtrade is using a SQLite database where it stores various types of information such as the trades you performed in the past and the current position(s) you are holding at any time. This allows you to keep track of your profits, but most importantly, keep track of ongoing activity if the bot process would be restarted or would be terminated unexpectedly.
Freqtrade will, by default, use separate database files for dry-run and live bots (this assumes no database-url is given in either configuration nor via command line argument). For live trading mode, the default database will be tradesv3.sqlite and for dry-run it will be tradesv3.dryrun.sqlite.
The optional argument to the trade command used to specify the path of these files is --db-url, which requires a valid SQLAlchemy url. So when you are starting a bot with only the config and strategy arguments in dry-run mode, the following 2 commands would have the same outcome.
freqtrade trade -c MyConfig.json -s MyStrategy\n# is equivalent to\nfreqtrade trade -c MyConfig.json -s MyStrategy --db-url sqlite:///tradesv3.dryrun.sqlite\nIt means that if you are running the trade command in two different terminals, for example to test your strategy both for trades in USDT and in another instance for trades in BTC, you will have to run them with different databases.
If you specify the URL of a database which does not exist, freqtrade will create one with the name you specified. So to test your custom strategy with BTC and USDT stake currencies, you could use the following commands (in 2 separate terminals):
# Terminal 1:\nfreqtrade trade -c MyConfigBTC.json -s MyCustomStrategy --db-url sqlite:///user_data/tradesBTC.dryrun.sqlite\n# Terminal 2:\nfreqtrade trade -c MyConfigUSDT.json -s MyCustomStrategy --db-url sqlite:///user_data/tradesUSDT.dryrun.sqlite\nConversely, if you wish to do the same thing in production mode, you will also have to create at least one new database (in addition to the default one) and specify the path to the \"live\" databases, for example:
# Terminal 1:\nfreqtrade trade -c MyConfigBTC.json -s MyCustomStrategy --db-url sqlite:///user_data/tradesBTC.live.sqlite\n# Terminal 2:\nfreqtrade trade -c MyConfigUSDT.json -s MyCustomStrategy --db-url sqlite:///user_data/tradesUSDT.live.sqlite\nFor more information regarding usage of the sqlite databases, for example to manually enter or remove trades, please refer to the SQL Cheatsheet.
"},{"location":"advanced-setup/#multiple-instances-using-docker","title":"Multiple instances using docker","text":"To run multiple instances of freqtrade using docker you will need to edit the docker-compose.yml file and add all the instances you want as separate services. Remember, you can separate your configuration into multiple files, so it's a good idea to think about making them modular, then if you need to edit something common to all bots, you can do that in a single config file.
---\nversion: '3'\nservices:\n freqtrade1:\n image: freqtradeorg/freqtrade:stable\n # image: freqtradeorg/freqtrade:develop\n # Use plotting image\n # image: freqtradeorg/freqtrade:develop_plot\n # Build step - only needed when additional dependencies are needed\n # build:\n # context: .\n # dockerfile: \"./docker/Dockerfile.custom\"\n restart: always\n container_name: freqtrade1\n volumes:\n - \"./user_data:/freqtrade/user_data\"\n # Expose api on port 8080 (localhost only)\n # Please read the https://www.freqtrade.io/en/latest/rest-api/ documentation\n # before enabling this.\n ports:\n - \"127.0.0.1:8080:8080\"\n # Default command used when running `docker compose up`\n command: >\n trade\n --logfile /freqtrade/user_data/logs/freqtrade1.log\n --db-url sqlite:////freqtrade/user_data/tradesv3_freqtrade1.sqlite\n --config /freqtrade/user_data/config.json\n --config /freqtrade/user_data/config.freqtrade1.json\n --strategy SampleStrategy\n\n freqtrade2:\n image: freqtradeorg/freqtrade:stable\n # image: freqtradeorg/freqtrade:develop\n # Use plotting image\n # image: freqtradeorg/freqtrade:develop_plot\n # Build step - only needed when additional dependencies are needed\n # build:\n # context: .\n # dockerfile: \"./docker/Dockerfile.custom\"\n restart: always\n container_name: freqtrade2\n volumes:\n - \"./user_data:/freqtrade/user_data\"\n # Expose api on port 8080 (localhost only)\n # Please read the https://www.freqtrade.io/en/latest/rest-api/ documentation\n # before enabling this.\n ports:\n - \"127.0.0.1:8081:8080\"\n # Default command used when running `docker compose up`\n command: >\n trade\n --logfile /freqtrade/user_data/logs/freqtrade2.log\n --db-url sqlite:////freqtrade/user_data/tradesv3_freqtrade2.sqlite\n --config /freqtrade/user_data/config.json\n --config /freqtrade/user_data/config.freqtrade2.json\n --strategy SampleStrategy\nYou can use whatever naming convention you want, freqtrade1 and 2 are arbitrary. Note, that you will need to use different database files, port mappings and telegram configurations for each instance, as mentioned above.
"},{"location":"advanced-setup/#use-a-different-database-system","title":"Use a different database system","text":"Freqtrade is using SQLAlchemy, which supports multiple different database systems. As such, a multitude of database systems should be supported. Freqtrade does not depend or install any additional database driver. Please refer to the SQLAlchemy docs on installation instructions for the respective database systems.
The following systems have been tested and are known to work with freqtrade:
Warning
By using one of the below database systems, you acknowledge that you know how to manage such a system. The freqtrade team will not provide any support with setup or maintenance (or backups) of the below database systems.
"},{"location":"advanced-setup/#postgresql","title":"PostgreSQL","text":"Installation: pip install psycopg2-binary
Usage: ... --db-url postgresql+psycopg2://<username>:<password>@localhost:5432/<database>
Freqtrade will automatically create the tables necessary upon startup.
If you're running different instances of Freqtrade, you must either setup one database per Instance or use different users / schemas for your connections.
"},{"location":"advanced-setup/#mariadb-mysql","title":"MariaDB / MySQL","text":"Freqtrade supports MariaDB by using SQLAlchemy, which supports multiple different database systems.
Installation: pip install pymysql
Usage: ... --db-url mysql+pymysql://<username>:<password>@localhost:3306/<database>
Copy the freqtrade.service file to your systemd user directory (usually ~/.config/systemd/user) and update WorkingDirectory and ExecStart to match your setup.
Note
Certain systems (like Raspbian) don't load service unit files from the user directory. In this case, copy freqtrade.service into /etc/systemd/user/ (requires superuser permissions).
After that you can start the daemon with:
systemctl --user start freqtrade\nFor this to be persistent (run when user is logged out) you'll need to enable linger for your freqtrade user.
sudo loginctl enable-linger \"$USER\"\nIf you run the bot as a service, you can use systemd service manager as a software watchdog monitoring freqtrade bot state and restarting it in the case of failures. If the internals.sd_notify parameter is set to true in the configuration or the --sd-notify command line option is used, the bot will send keep-alive ping messages to systemd using the sd_notify (systemd notifications) protocol and will also tell systemd its current state (Running, Paused or Stopped) when it changes.
The freqtrade.service.watchdog file contains an example of the service unit configuration file which uses systemd as the watchdog.
Note
The sd_notify communication between the bot and the systemd service manager will not work if the bot runs in a Docker container.
"},{"location":"advanced-setup/#advanced-logging","title":"Advanced Logging","text":"Freqtrade uses the default logging module provided by python. Python allows for extensive logging configuration in this regard - way more than what can be covered here.
Default logging format (coloured terminal output) is set up by default if no log_config is provided in your freqtrade configuration. Using --logfile logfile.log will enable the RotatingFileHandler.
If you're not content with the log format, or with the default settings provided for the RotatingFileHandler, you can customize logging to your liking by adding the log_config configuration to your freqtrade configuration file(s).
The default configuration looks roughly like the below, with the file handler being provided but not enabled as the filename is commented out. Uncomment this line and supply a valid path/filename to enable it.
{\n \"log_config\": {\n \"version\": 1,\n \"formatters\": {\n \"basic\": {\n \"format\": \"%(message)s\"\n },\n \"standard\": {\n \"format\": \"%(asctime)s - %(name)s - %(levelname)s - %(message)s\"\n }\n },\n \"handlers\": {\n \"console\": {\n \"class\": \"freqtrade.loggers.ft_rich_handler.FtRichHandler\",\n \"formatter\": \"basic\"\n },\n \"file\": {\n \"class\": \"logging.handlers.RotatingFileHandler\",\n \"formatter\": \"standard\",\n // \"filename\": \"someRandomLogFile.log\",\n \"maxBytes\": 10485760,\n \"backupCount\": 10\n }\n },\n \"root\": {\n \"handlers\": [\n \"console\",\n // \"file\"\n ],\n \"level\": \"INFO\",\n }\n }\n}\nhighlighted lines
Highlighted lines in the above code-block define the Rich handler and belong together. The formatter \"standard\" and \"file\" will belong to the FileHandler.
Each handler must use one of the defined formatters (by name), its class must be available, and must be a valid logging class. To actually use a handler, it must be in the \"handlers\" section inside the \"root\" segment. If this section is left out, freqtrade will provide no output (in the non-configured handler, anyway).
Explicit log configuration
We recommend to extract the logging configuration from your main freqtrade configuration file, and provide it to your bot via multiple configuration files functionality. This will avoid unnecessary code duplication.
On many Linux systems the bot can be configured to send its log messages to syslog or journald system services. Logging to a remote syslog server is also available on Windows. The special values for the --logfile command line option can be used for this.
To send Freqtrade log messages to a local or remote syslog service use the \"log_config\" setup option to configure logging.
{\n // ...\n \"log_config\": {\n \"version\": 1,\n \"formatters\": {\n \"syslog_fmt\": {\n \"format\": \"%(name)s - %(levelname)s - %(message)s\"\n }\n },\n \"handlers\": {\n // Other handlers? \n \"syslog\": {\n \"class\": \"logging.handlers.SysLogHandler\",\n \"formatter\": \"syslog_fmt\",\n // Use one of the other options above as address instead? \n \"address\": \"/dev/log\"\n }\n },\n \"root\": {\n \"handlers\": [\n // other handlers\n \"syslog\",\n\n ]\n }\n\n }\n}\nAdditional log-handlers may need to be configured to for example also have log output in the console.
"},{"location":"advanced-setup/#syslog-usage","title":"Syslog usage","text":"Log messages are send to syslog with the user facility. So you can see them with the following commands:
tail -f /var/log/user, orOn many systems syslog (rsyslog) fetches data from journald (and vice versa), so both syslog or journald can be used and the messages be viewed with both journalctl and a syslog viewer utility. You can combine this in any way which suites you better.
For rsyslog the messages from the bot can be redirected into a separate dedicated log file. To achieve this, add
if $programname startswith \"freqtrade\" then -/var/log/freqtrade.log\nto one of the rsyslog configuration files, for example at the end of the /etc/rsyslog.d/50-default.conf.
For syslog (rsyslog), the reduction mode can be switched on. This will reduce the number of repeating messages. For instance, multiple bot Heartbeat messages will be reduced to a single message when nothing else happens with the bot. To achieve this, set in /etc/rsyslog.conf:
# Filter duplicated messages\n$RepeatedMsgReduction on\nThe syslog address can be either a Unix domain socket (socket filename) or a UDP socket specification, consisting of IP address and UDP port, separated by the : character.
So, the following are the examples of possible addresses:
\"address\": \"/dev/log\" -- log to syslog (rsyslog) using the /dev/log socket, suitable for most systems.\"address\": \"/var/run/syslog\" -- log to syslog (rsyslog) using the /var/run/syslog socket. Use this on MacOS.\"address\": \"localhost:514\" -- log to local syslog using UDP socket, if it listens on port 514.\"address\": \"<ip>:514\" -- log to remote syslog at IP address and port 514. This may be used on Windows for remote logging to an external syslog server.--logfile syslog:<syslog_address> -- send log messages to syslog service using the <syslog_address> as the syslog address.
The syslog address can be either a Unix domain socket (socket filename) or a UDP socket specification, consisting of IP address and UDP port, separated by the : character.
So, the following are the examples of possible usages:
--logfile syslog:/dev/log -- log to syslog (rsyslog) using the /dev/log socket, suitable for most systems.--logfile syslog -- same as above, the shortcut for /dev/log.--logfile syslog:/var/run/syslog -- log to syslog (rsyslog) using the /var/run/syslog socket. Use this on MacOS.--logfile syslog:localhost:514 -- log to local syslog using UDP socket, if it listens on port 514.--logfile syslog:<ip>:514 -- log to remote syslog at IP address and port 514. This may be used on Windows for remote logging to an external syslog server.This needs the cysystemd python package installed as dependency (pip install cysystemd), which is not available on Windows. Hence, the whole journald logging functionality is not available for a bot running on Windows.
To send Freqtrade log messages to journald system service, add the following configuration snippet to your configuration.
{\n // ...\n \"log_config\": {\n \"version\": 1,\n \"formatters\": {\n \"journald_fmt\": {\n \"format\": \"%(name)s - %(levelname)s - %(message)s\"\n }\n },\n \"handlers\": {\n // Other handlers? \n \"journald\": {\n \"class\": \"cysystemd.journal.JournaldLogHandler\",\n \"formatter\": \"journald_fmt\",\n }\n },\n \"root\": {\n \"handlers\": [\n // .. \n \"journald\",\n\n ]\n }\n\n }\n}\nAdditional log-handlers may need to be configured to for example also have log output in the console.
Log messages are send to journald with the user facility. So you can see them with the following commands:
journalctl -f -- shows Freqtrade log messages sent to journald along with other log messages fetched by journald.journalctl -f -u freqtrade.service -- this command can be used when the bot is run as a systemd service.There are many other options in the journalctl utility to filter the messages, see manual pages for this utility.
On many systems syslog (rsyslog) fetches data from journald (and vice versa), so both --logfile syslog or --logfile journald can be used and the messages be viewed with both journalctl and a syslog viewer utility. You can combine this in any way which suites you better.
To send Freqtrade log messages to journald system service use the --logfile command line option with the value in the following format:
--logfile journald -- send log messages to journald.
You can also configure the default output stream to use JSON format instead. The \"fmt_dict\" attribute defines the keys for the json output - as well as the python logging LogRecord attributes.
The below configuration will change the default output to JSON. The same formatter could however also be used in combination with the RotatingFileHandler. We recommend to keep one format in human readable form.
{\n // ...\n \"log_config\": {\n \"version\": 1,\n \"formatters\": {\n \"json\": {\n \"()\": \"freqtrade.loggers.json_formatter.JsonFormatter\",\n \"fmt_dict\": {\n \"timestamp\": \"asctime\",\n \"level\": \"levelname\",\n \"logger\": \"name\",\n \"message\": \"message\"\n }\n }\n },\n \"handlers\": {\n // Other handlers? \n \"jsonStream\": {\n \"class\": \"logging.StreamHandler\",\n \"formatter\": \"json\"\n }\n },\n \"root\": {\n \"handlers\": [\n // .. \n \"jsonStream\",\n\n ]\n }\n\n }\n}\nThis page explains how to validate your strategy performance by using Backtesting.
Backtesting requires historic data to be available. To learn how to get data for the pairs and exchange you're interested in, head over to the Data Downloading section of the documentation.
Backtesting is also available in webserver mode, which allows you to run backtests via the web interface.
"},{"location":"backtesting/#backtesting-command-reference","title":"Backtesting command reference","text":"usage: freqtrade backtesting [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH] [-s NAME]\n [--strategy-path PATH]\n [--recursive-strategy-search]\n [--freqaimodel NAME] [--freqaimodel-path PATH]\n [-i TIMEFRAME] [--timerange TIMERANGE]\n [--data-format-ohlcv {json,jsongz,feather,parquet}]\n [--max-open-trades INT]\n [--stake-amount STAKE_AMOUNT] [--fee FLOAT]\n [-p PAIRS [PAIRS ...]] [--eps]\n [--enable-protections]\n [--enable-dynamic-pairlist]\n [--dry-run-wallet DRY_RUN_WALLET]\n [--timeframe-detail TIMEFRAME_DETAIL]\n [--strategy-list STRATEGY_LIST [STRATEGY_LIST ...]]\n [--export {none,trades,signals}]\n [--backtest-filename PATH]\n [--backtest-directory PATH]\n [--breakdown {day,week,month,year} [{day,week,month,year} ...]]\n [--cache {none,day,week,month}]\n [--freqai-backtest-live-models] [--notes TEXT]\n\noptions:\n -h, --help show this help message and exit\n -i TIMEFRAME, --timeframe TIMEFRAME\n Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).\n --timerange TIMERANGE\n Specify what timerange of data to use.\n --data-format-ohlcv {json,jsongz,feather,parquet}\n Storage format for downloaded candle (OHLCV) data.\n (default: `feather`).\n --max-open-trades INT\n Override the value of the `max_open_trades`\n configuration setting.\n --stake-amount STAKE_AMOUNT\n Override the value of the `stake_amount` configuration\n setting.\n --fee FLOAT Specify fee ratio. Will be applied twice (on trade\n entry and exit).\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --eps, --enable-position-stacking\n Allow buying the same pair multiple times (position\n stacking).\n --enable-protections, --enableprotections\n Enable protections for backtesting. Will slow\n backtesting down by a considerable amount, but will\n include configured protections\n --enable-dynamic-pairlist\n Enables dynamic pairlist refreshes in backtesting. The\n pairlist will be generated for each new candle if\n you're using a pairlist handler that supports this\n feature, for example, ShuffleFilter.\n --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET\n Starting balance, used for backtesting / hyperopt and\n dry-runs.\n --timeframe-detail TIMEFRAME_DETAIL\n Specify detail timeframe for backtesting (`1m`, `5m`,\n `30m`, `1h`, `1d`).\n --strategy-list STRATEGY_LIST [STRATEGY_LIST ...]\n Provide a space-separated list of strategies to\n backtest. Please note that timeframe needs to be set\n either in config or via command line. When using this\n together with `--export trades`, the strategy-name is\n injected into the filename (so `backtest-data.json`\n becomes `backtest-data-SampleStrategy.json`\n --export {none,trades,signals}\n Export backtest results (default: trades).\n --backtest-filename PATH, --export-filename PATH\n Use this filename for backtest results.Example:\n `--backtest-\n filename=backtest_results_2020-09-27_16-20-48.json`.\n Assumes either `user_data/backtest_results/` or\n `--export-directory` as base directory.\n --backtest-directory PATH, --export-directory PATH\n Directory to use for backtest results. Example:\n `--export-directory=user_data/backtest_results/`.\n --breakdown {day,week,month,year} [{day,week,month,year} ...]\n Show backtesting breakdown per [day, week, month,\n year].\n --cache {none,day,week,month}\n Load a cached backtest result no older than specified\n age (default: day).\n --freqai-backtest-live-models\n Run backtest with ready models.\n --notes TEXT Add notes to the backtest results.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n\nStrategy arguments:\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n --freqaimodel NAME Specify a custom freqaimodels.\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\nNow you have good Entry and exit strategies and some historic data, you want to test it against real data. This is what we call backtesting.
Backtesting will use the crypto-currencies (pairs) from your config file and load historical candle (OHLCV) data from user_data/data/<exchange> by default. If no data is available for the exchange / pair / timeframe combination, backtesting will ask you to download them first using freqtrade download-data. For details on downloading, please refer to the Data Downloading section in the documentation.
The result of backtesting will confirm if your bot has better odds of making a profit than a loss.
All profit calculations include fees, and freqtrade will use the exchange's default fees for the calculation.
Using dynamic pairlists for backtesting
Using dynamic pairlists is possible (not all of the handlers are allowed to be used in backtest mode), however it relies on the current market conditions - which will not reflect the historic status of the pairlist. Also, when using pairlists other than StaticPairlist, reproducibility of backtesting-results cannot be guaranteed. Please read the pairlists documentation for more information.
To achieve reproducible results, best generate a pairlist via the test-pairlist command and use that as static pairlist.
Note
By default, Freqtrade will export backtesting results to user_data/backtest_results. The exported trades can be used for further analysis or can be used by the plotting sub-command (freqtrade plot-dataframe) in the scripts directory.
Backtesting will require a starting balance, which can be provided as --dry-run-wallet <balance> or --starting-balance <balance> command line argument, or via dry_run_wallet configuration setting. This amount must be higher than stake_amount, otherwise the bot will not be able to simulate any trade.
Backtesting supports dynamic stake amount by configuring stake_amount as \"unlimited\", which will split the starting balance into max_open_trades pieces. Profits from early trades will result in subsequent higher stake amounts, resulting in compounding of profits over the backtesting period.
With 5 min candle (OHLCV) data (per default)
freqtrade backtesting --strategy AwesomeStrategy\nWhere --strategy AwesomeStrategy / -s AwesomeStrategy refers to the class name of the strategy, which is within a python file in the user_data/strategies directory.
With 1 min candle (OHLCV) data
freqtrade backtesting --strategy AwesomeStrategy --timeframe 1m\nProviding a custom starting balance of 1000 (in stake currency)
freqtrade backtesting --strategy AwesomeStrategy --dry-run-wallet 1000\nUsing a different on-disk historical candle (OHLCV) data source
Assume you downloaded the history data from the Binance exchange and kept it in the user_data/data/binance-20180101 directory. You can then use this data for backtesting as follows:
freqtrade backtesting --strategy AwesomeStrategy --datadir user_data/data/binance-20180101 \nComparing multiple Strategies
freqtrade backtesting --strategy-list SampleStrategy1 AwesomeStrategy --timeframe 5m\nWhere SampleStrategy1 and AwesomeStrategy refer to class names of strategies.
Prevent exporting trades to file
freqtrade backtesting --strategy backtesting --export none --config config.json \nOnly use this if you're sure you'll not want to plot or analyze your results further.
Exporting trades to file specifying a custom directory
freqtrade backtesting --strategy backtesting --export trades --backtest-directory=user_data/custom-backtest-results\nPlease also read about the strategy startup period.
Supplying custom fee value
Sometimes your account has certain fee rebates (fee reductions starting with a certain account size or monthly volume), which are not visible to ccxt. To account for this in backtesting, you can use the --fee command line option to supply this value to backtesting. This fee must be a ratio, and will be applied twice (once for trade entry, and once for trade exit).
For example, if the commission fee per order is 0.1% (i.e., 0.001 written as ratio), then you would run backtesting as the following:
freqtrade backtesting --fee 0.001\nNote
Only supply this option (or the corresponding configuration parameter) if you want to experiment with different fee values. By default, Backtesting fetches the default fee from the exchange pair/market info.
Running backtest with smaller test-set by using timerange
Use the --timerange argument to change how much of the test-set you want to use.
For example, running backtesting with the --timerange=20190501- option will use all available data starting with May 1st, 2019 from your input data.
freqtrade backtesting --timerange=20190501-\nYou can also specify particular date ranges.
The full timerange specification:
--timerange=-20180131--timerange=20180131---timerange=20180131-20180301--timerange=1527595200-1527618600The most important in the backtesting is to understand the result.
A backtesting result will look like that:
BACKTESTING REPORT \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Pair \u2503 Trades \u2503 Avg Profit % \u2503 Tot Profit USDT \u2503 Tot Profit % \u2503 Avg Duration \u2503 Win Draw Loss Win% \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 LTC/USDT:USDT \u2502 16 \u2502 1.0 \u2502 56.176 \u2502 5.62 \u2502 16:16:00 \u2502 16 0 0 100 \u2502\n\u2502 ETC/USDT:USDT \u2502 12 \u2502 0.72 \u2502 30.936 \u2502 3.09 \u2502 9:55:00 \u2502 11 0 1 91.7 \u2502\n\u2502 ETH/USDT:USDT \u2502 8 \u2502 0.66 \u2502 17.864 \u2502 1.79 \u2502 1 day, 13:55:00 \u2502 7 0 1 87.5 \u2502\n\u2502 XLM/USDT:USDT \u2502 10 \u2502 0.31 \u2502 11.054 \u2502 1.11 \u2502 12:08:00 \u2502 9 0 1 90.0 \u2502\n\u2502 BTC/USDT:USDT \u2502 8 \u2502 0.21 \u2502 7.289 \u2502 0.73 \u2502 3 days, 1:24:00 \u2502 6 0 2 75.0 \u2502\n\u2502 XRP/USDT:USDT \u2502 9 \u2502 -0.14 \u2502 -7.261 \u2502 -0.73 \u2502 21:18:00 \u2502 8 0 1 88.9 \u2502\n\u2502 DOT/USDT:USDT \u2502 6 \u2502 -0.4 \u2502 -9.187 \u2502 -0.92 \u2502 5:35:00 \u2502 4 0 2 66.7 \u2502\n\u2502 ADA/USDT:USDT \u2502 8 \u2502 -1.76 \u2502 -52.098 \u2502 -5.21 \u2502 11:38:00 \u2502 6 0 2 75.0 \u2502\n\u2502 TOTAL \u2502 77 \u2502 0.22 \u2502 54.774 \u2502 5.48 \u2502 22:12:00 \u2502 67 0 10 87.0 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n LEFT OPEN TRADES REPORT \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Pair \u2503 Trades \u2503 Avg Profit % \u2503 Tot Profit USDT \u2503 Tot Profit % \u2503 Avg Duration \u2503 Win Draw Loss Win% \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 BTC/USDT:USDT \u2502 1 \u2502 -4.14 \u2502 -9.930 \u2502 -0.99 \u2502 17 days, 8:00:00 \u2502 0 0 1 0 \u2502\n\u2502 ETC/USDT:USDT \u2502 1 \u2502 -4.24 \u2502 -15.365 \u2502 -1.54 \u2502 10:40:00 \u2502 0 0 1 0 \u2502\n\u2502 DOT/USDT:USDT \u2502 1 \u2502 -5.29 \u2502 -19.125 \u2502 -1.91 \u2502 11:30:00 \u2502 0 0 1 0 \u2502\n\u2502 TOTAL \u2502 3 \u2502 -4.56 \u2502 -44.420 \u2502 -4.44 \u2502 6 days, 2:03:00 \u2502 0 0 3 0 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n ENTER TAG STATS \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Enter Tag \u2503 Entries \u2503 Avg Profit % \u2503 Tot Profit USDT \u2503 Tot Profit % \u2503 Avg Duration \u2503 Win Draw Loss Win% \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 OTHER \u2502 77 \u2502 0.22 \u2502 54.774 \u2502 5.48 \u2502 22:12:00 \u2502 67 0 10 87.0 \u2502\n\u2502 TOTAL \u2502 77 \u2502 0.22 \u2502 54.774 \u2502 5.48 \u2502 22:12:00 \u2502 67 0 10 87.0 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n EXIT REASON STATS \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Exit Reason \u2503 Exits \u2503 Avg Profit % \u2503 Tot Profit USDT \u2503 Tot Profit % \u2503 Avg Duration \u2503 Win Draw Loss Win% \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 roi \u2502 67 \u2502 1.05 \u2502 242.179 \u2502 24.22 \u2502 15:49:00 \u2502 67 0 0 100 \u2502\n\u2502 exit_signal \u2502 4 \u2502 -2.23 \u2502 -31.217 \u2502 -3.12 \u2502 1 day, 8:38:00 \u2502 0 0 4 0 \u2502\n\u2502 force_exit \u2502 3 \u2502 -4.56 \u2502 -44.420 \u2502 -4.44 \u2502 6 days, 2:03:00 \u2502 0 0 3 0 \u2502\n\u2502 stop_loss \u2502 3 \u2502 -10.14 \u2502 -111.768 \u2502 -11.18 \u2502 1 day, 3:05:00 \u2502 0 0 3 0 \u2502\n\u2502 TOTAL \u2502 77 \u2502 0.22 \u2502 54.774 \u2502 5.48 \u2502 22:12:00 \u2502 67 0 10 87.0 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n MIXED TAG STATS \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Enter Tag \u2503 Exit Reason \u2503 Trades \u2503 Avg Profit % \u2503 Tot Profit USDT \u2503 Tot Profit % \u2503 Avg Duration \u2503 Win Draw Loss Win% \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 \u2502 roi \u2502 67 \u2502 1.05 \u2502 242.179 \u2502 24.22 \u2502 15:49:00 \u2502 67 0 0 100 \u2502\n\u2502 \u2502 exit_signal \u2502 4 \u2502 -2.23 \u2502 -31.217 \u2502 -3.12 \u2502 1 day, 8:38:00 \u2502 0 0 4 0 \u2502\n\u2502 \u2502 force_exit \u2502 3 \u2502 -4.56 \u2502 -44.420 \u2502 -4.44 \u2502 6 days, 2:03:00 \u2502 0 0 3 0 \u2502\n\u2502 \u2502 stop_loss \u2502 3 \u2502 -10.14 \u2502 -111.768 \u2502 -11.18 \u2502 1 day, 3:05:00 \u2502 0 0 3 0 \u2502\n\u2502 TOTAL \u2502 \u2502 77 \u2502 0.22 \u2502 54.774 \u2502 5.48 \u2502 22:12:00 \u2502 67 0 10 87.0 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n SUMMARY METRICS \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Metric \u2503 Value \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 Backtesting from \u2502 2025-07-01 00:00:00 \u2502\n\u2502 Backtesting to \u2502 2025-08-01 00:00:00 \u2502\n\u2502 Trading Mode \u2502 Isolated Futures \u2502\n\u2502 Max open trades \u2502 3 \u2502\n\u2502 \u2502 \u2502\n\u2502 Total/Daily Avg Trades \u2502 77 / 2.48 \u2502\n\u2502 Starting balance \u2502 1000 USDT \u2502\n\u2502 Final balance \u2502 1054.774 USDT \u2502\n\u2502 Absolute profit \u2502 54.774 USDT \u2502\n\u2502 Total profit % \u2502 5.48% \u2502\n\u2502 CAGR % \u2502 87.36% \u2502\n\u2502 Sortino \u2502 2.48 \u2502\n\u2502 Sharpe \u2502 3.75 \u2502\n\u2502 Calmar \u2502 40.99 \u2502\n\u2502 SQN \u2502 0.69 \u2502\n\u2502 Profit factor \u2502 1.29 \u2502\n\u2502 Expectancy (Ratio) \u2502 0.71 (0.04) \u2502\n\u2502 Avg. daily profit \u2502 1.767 USDT \u2502\n\u2502 Avg. stake amount \u2502 345.016 USDT \u2502\n\u2502 Total trade volume \u2502 53316.954 USDT \u2502\n\u2502 \u2502 \u2502\n\u2502 Long / Short trades \u2502 67 / 10 \u2502\n\u2502 Long / Short profit % \u2502 8.94% / -3.47% \u2502\n\u2502 Long / Short profit USDT \u2502 89.425 / -34.651 \u2502\n\u2502 \u2502 \u2502\n\u2502 Best Pair \u2502 LTC/USDT:USDT 5.62% \u2502\n\u2502 Worst Pair \u2502 ADA/USDT:USDT -5.21% \u2502\n\u2502 Best trade \u2502 ETC/USDT:USDT 2.00% \u2502\n\u2502 Worst trade \u2502 ADA/USDT:USDT -10.17% \u2502\n\u2502 Best day \u2502 26.91 USDT \u2502\n\u2502 Worst day \u2502 -47.741 USDT \u2502\n\u2502 Days win/draw/lose \u2502 20 / 6 / 5 \u2502\n\u2502 Min/Max/Avg. Duration Winners \u2502 0d 00:35 / 5d 18:15 / 0d 15:49 \u2502\n\u2502 Min/Max/Avg. Duration Losers \u2502 0d 10:40 / 17d 08:00 / 2d 17:00 \u2502\n\u2502 Max Consecutive Wins / Loss \u2502 36 / 3 \u2502\n\u2502 Rejected Entry signals \u2502 258 \u2502\n\u2502 Entry/Exit Timeouts \u2502 0 / 0 \u2502\n\u2502 \u2502 \u2502\n\u2502 Min balance \u2502 1003.168 USDT \u2502\n\u2502 Max balance \u2502 1149.421 USDT \u2502\n\u2502 Max % of account underwater \u2502 8.23% \u2502\n\u2502 Absolute drawdown \u2502 94.647 USDT (8.23%) \u2502\n\u2502 Drawdown duration \u2502 9 days 08:50:00 \u2502\n\u2502 Profit at drawdown start \u2502 149.421 USDT \u2502\n\u2502 Profit at drawdown end \u2502 54.774 USDT \u2502\n\u2502 Drawdown start \u2502 2025-07-22 15:10:00 \u2502\n\u2502 Drawdown end \u2502 2025-08-01 00:00:00 \u2502\n\u2502 Market change \u2502 30.51% \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n\nBacktested 2025-07-01 00:00:00 -> 2025-08-01 00:00:00 | Max open trades : 3\n STRATEGY SUMMARY \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Strategy \u2503 Trades \u2503 Avg Profit % \u2503 Tot Profit USDT \u2503 Tot Profit % \u2503 Avg Duration \u2503 Win Draw Loss Win% \u2503 Drawdown \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 SampleStrategy \u2502 77 \u2502 0.22 \u2502 54.774 \u2502 5.48 \u2502 22:12:00 \u2502 67 0 10 87.0 \u2502 94.647 USDT 8.23% \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\nThe first table contains all trades the bot made, including \"left open trades\".
The last line will give you the overall performance of your strategy, here:
\u2502 TOTAL \u2502 77 \u2502 0.22 \u2502 54.774 \u2502 5.48 \u2502 22:12:00 \u2502 67 0 10 87.0 \u2502\nThe bot has made 77 trades for an average duration of 22:12:00, with a performance of 5.48% (profit), that means it has earned a total of 54.774 USDT starting with a capital of 1000 USDT.
The column Avg Profit % shows the average profit for all trades made. The column Tot Profit % shows instead the total profit % in relation to the starting balance.
In the above results, we have a starting balance of 1000 USDT and an absolute profit of 54.774 USDT - so the Tot Profit % will be (54.774 / 1000) * 100 ~= 5.48%.
Your strategy performance is influenced by your entry strategy, your exit strategy, and also by the minimal_roi and stop_loss you have set.
For example, if your minimal_roi is only \"0\": 0.01 you cannot expect the bot to make more profit than 1% (because it will exit every time a trade reaches 1%).
\"minimal_roi\": {\n \"0\": 0.01\n},\nOn the other hand, if you set a too high minimal_roi like \"0\": 0.55 (55%), there is almost no chance that the bot will ever reach this profit. Hence, keep in mind that your performance is an integral mix of all different elements of the strategy, your configuration, and the crypto-currency pairs you have set up.
The second table contains all trades the bot had to force_exit at the end of the backtesting period to present you the full picture. This is necessary to simulate realistic behavior, since the backtest period has to end at some point, while realistically, you could leave the bot running forever. These trades are also included in the first table, but are also shown separately in this table for clarity.
The third table provides a breakdown of trades by their entry tags (e.g., enter_long, enter_short), showing the number of entries, average profit percentage, total profit in the stake currency, total profit percentage, average duration, and the number of wins, draws, and losses for each tag.
The fourth table contains a recap of exit reasons (e.g., exit_signal, roi, stop_loss, force_exit). This table can tell you which area needs additional work (e.g., if many exit_signal trades are losses, you should work on improving the exit signal or consider disabling it).
The fifth table combines entry tags and exit reasons, providing a detailed view of how different entry tags performed with specific exit reasons. This can help identify which combinations of entry and exit strategies are most effective.
"},{"location":"backtesting/#summary-metrics","title":"Summary metrics","text":"The last element of the backtest report is the summary metrics table. It contains key metrics about the performance of your strategy on backtesting data.
\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Metric \u2503 Value \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 Backtesting from \u2502 2025-07-01 00:00:00 \u2502\n\u2502 Backtesting to \u2502 2025-08-01 00:00:00 \u2502\n\u2502 Trading Mode \u2502 Isolated Futures \u2502\n\u2502 Max open trades \u2502 3 \u2502\n\u2502 \u2502 \u2502\n\u2502 Total/Daily Avg Trades \u2502 72 / 2.32 \u2502\n\u2502 Starting balance \u2502 1000 USDT \u2502\n\u2502 Final balance \u2502 1106.734 USDT \u2502\n\u2502 Absolute profit \u2502 106.734 USDT \u2502\n\u2502 Total profit % \u2502 10.67% \u2502\n\u2502 CAGR % \u2502 230.04% \u2502\n\u2502 Sortino \u2502 4.99 \u2502\n\u2502 Sharpe \u2502 8.00 \u2502\n\u2502 Calmar \u2502 77.76 \u2502\n\u2502 SQN \u2502 1.52 \u2502\n\u2502 Profit factor \u2502 1.79 \u2502\n\u2502 Expectancy (Ratio) \u2502 1.48 (0.07) \u2502\n\u2502 Avg. daily profit \u2502 3.443 USDT \u2502\n\u2502 Avg. stake amount \u2502 363.133 USDT \u2502\n\u2502 Total trade volume \u2502 52466.174 USDT \u2502\n\u2502 \u2502 \u2502\n\u2502 Best Pair \u2502 LTC/USDT:USDT 4.48% \u2502\n\u2502 Worst Pair \u2502 ADA/USDT:USDT -1.78% \u2502\n\u2502 Best trade \u2502 ETC/USDT:USDT 2.00% \u2502\n\u2502 Worst trade \u2502 ADA/USDT:USDT -10.17% \u2502\n\u2502 Best day \u2502 23.535 USDT \u2502\n\u2502 Worst day \u2502 -49.813 USDT \u2502\n\u2502 Days win/draw/lose \u2502 21 / 6 / 4 \u2502\n\u2502 Min/Max/Avg. Duration Winners \u2502 0d 00:35 / 5d 18:15 / 0d 15:30 \u2502\n\u2502 Min/Max/Avg. Duration Losers \u2502 0d 12:00 / 17d 08:00 / 3d 23:28 \u2502\n\u2502 Max Consecutive Wins / Loss \u2502 58 / 4 \u2502\n\u2502 Rejected Entry signals \u2502 254 \u2502\n\u2502 Entry/Exit Timeouts \u2502 0 / 0 \u2502\n\u2502 \u2502 \u2502\n\u2502 Min balance \u2502 1003.168 USDT \u2502\n\u2502 Max balance \u2502 1209 USDT \u2502\n\u2502 Max % of account underwater \u2502 8.46% \u2502\n\u2502 Absolute drawdown \u2502 102.266 USDT (8.46%) \u2502\n\u2502 Drawdown duration \u2502 9 days 08:50:00 \u2502\n\u2502 Profit at drawdown start \u2502 209 USDT \u2502\n\u2502 Profit at drawdown end \u2502 106.734 USDT \u2502\n\u2502 Drawdown start \u2502 2025-07-22 15:10:00 \u2502\n\u2502 Drawdown end \u2502 2025-08-01 00:00:00 \u2502\n\u2502 Market change \u2502 30.51% \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\nBacktesting from / Backtesting to: Backtesting range (usually defined with the --timerange option).Trading Mode: Spot or Futures trading.Max open trades: Setting of max_open_trades (or --max-open-trades) - or number of pairs in the pairlist (whatever is lower).Total/Daily Avg Trades: Identical to the total trades of the backtest output table / Total trades divided by the backtesting duration in days (this will give you information about how many trades to expect from the strategy).Starting balance: Start balance - as given by dry-run-wallet (config or command line).Final balance: Final balance - starting balance + absolute profit.Absolute profit: Profit made in stake currency.Total profit %: Total profit. Aligned to the TOTAL row's Tot Profit % from the first table. Calculated as (End capital \u2212 Starting capital) / Starting capital.CAGR %: Compound annual growth rate.Sortino: Annualized Sortino ratio.Sharpe: Annualized Sharpe ratio.Calmar: Annualized Calmar ratio.SQN: System Quality Number (SQN) - by Van Tharp.Profit factor: Sum of the profits of all winning trades divided by the sum of the losses of all losing trades.Expectancy (Ratio): Expectancy ratio, which is the average profit or loss per trade. A negative expectancy ratio means that your strategy is not profitable.Avg. daily profit: Average profit per day, calculated as (Total Profit / Backtest Days).Avg. stake amount: Average stake amount, either stake_amount or the average when using dynamic stake amount.Total trade volume: Volume generated on the exchange to reach the above profit.Long / Short trades: Split long/short trade counts (only shown when short trades were made).Long / Short profit %: Profit percentage for long and short trades (only shown when short trades were made).Long / Short profit USDT: Profit in stake currency for long and short trades (only shown when short trades were made).Best Pair / Worst Pair: Best and worst performing pair (based on total profit percentage), and its corresponding Tot Profit %.Best trade / Worst trade: Biggest single winning trade and biggest single losing trade.Best day / Worst day: Best and worst day based on daily profit.Days win/draw/lose: Winning / Losing days (draws are usually days without closed trades).Min/Max/Avg. Duration Winners: Minimum, maximum, and average durations for winning trades.Min/Max/Avg. Duration Losers: Minimum, maximum, and average durations for losing trades.Max Consecutive Wins / Loss: Maximum consecutive wins/losses in a row.Rejected Entry signals: Trade entry signals that could not be acted upon due to max_open_trades being reached.Entry/Exit Timeouts: Entry/exit orders which did not fill (only applicable if custom pricing is used).Min balance / Max balance: Lowest and Highest Wallet balance during the backtest period.Max % of account underwater: Maximum percentage your account has decreased from the top since the simulation started. Calculated as the maximum of (Max Balance - Current Balance) / (Max Balance).Absolute drawdown: Maximum absolute drawdown experienced, including percentage relative to the account calculated as (Absolute Drawdown) / (DrawdownHigh + startingBalance)..Drawdown duration: Duration of the largest drawdown period.Profit at drawdown start / Profit at drawdown end: Profit at the beginning and end of the largest drawdown period.Drawdown start / Drawdown end: Start and end datetime for the largest drawdown (can also be visualized via the plot-dataframe sub-command).Market change: Change of the market during the backtest period. Calculated as the average of all pairs' changes from the first to the last candle using the \"close\" column.You can get an overview over daily, weekly, monthly, or yearly results by using the --breakdown <> switch.
To visualize monthly and yearly breakdowns, you can use the following:
freqtrade backtesting --strategy MyAwesomeStrategy --breakdown month year\n MONTH BREAKDOWN\n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Month \u2503 Trades \u2503 Tot Profit USDT \u2503 Profit Factor \u2503 Win Draw Loss Win% \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 31/01/2020 \u2502 12 \u2502 44.451 \u2502 7.28 \u2502 10 0 2 83.3 \u2502\n\u2502 29/02/2020 \u2502 30 \u2502 45.41 \u2502 2.36 \u2502 17 0 13 56.7 \u2502\n\u2502 31/03/2020 \u2502 35 \u2502 142.024 \u2502 2.42 \u2502 14 0 21 40.0 \u2502\n\u2502 30/04/2020 \u2502 67 \u2502 -23.692 \u2502 0.81 \u2502 24 0 43 35.8 \u2502\n...\n...\n\u2502 30/04/2025 \u2502 203 \u2502 -63.43 \u2502 0.81 \u2502 73 0 130 36.0 \u2502\n\u2502 31/05/2025 \u2502 142 \u2502 104.675 \u2502 1.28 \u2502 59 0 83 41.5 \u2502\n\u2502 30/06/2025 \u2502 177 \u2502 -1.014 \u2502 1.0 \u2502 85 0 92 48.0 \u2502\n\u2502 31/07/2025 \u2502 155 \u2502 232.762 \u2502 1.6 \u2502 63 0 92 40.6 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n YEAR BREAKDOWN\n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Year \u2503 Trades \u2503 Tot Profit USDT \u2503 Profit Factor \u2503 Win Draw Loss Win% \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 31/12/2020 \u2502 896 \u2502 868.889 \u2502 1.46 \u2502 351 0 545 39.2 \u2502\n\u2502 31/12/2021 \u2502 1778 \u2502 4487.163 \u2502 1.93 \u2502 745 0 1033 41.9 \u2502\n\u2502 31/12/2022 \u2502 1736 \u2502 938.27 \u2502 1.27 \u2502 698 0 1038 40.2 \u2502\n\u2502 31/12/2023 \u2502 1712 \u2502 1677.126 \u2502 1.68 \u2502 670 0 1042 39.1 \u2502\n\u2502 31/12/2024 \u2502 1609 \u2502 3198.424 \u2502 2.22 \u2502 773 0 836 48.0 \u2502\n\u2502 31/12/2025 \u2502 1042 \u2502 716.174 \u2502 1.33 \u2502 420 0 622 40.3 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\nThe output will display tables containing the realized absolute profit (in stake currency) for the selected period, along with additional statistics such as number of trades, profit factor, and distribution of wins, draws, and losses that materialized (closed) on this period.
"},{"location":"backtesting/#backtest-result-caching","title":"Backtest result caching","text":"To save time, by default backtest will reuse a cached result from within the last day when the backtested strategy and config match that of a previous backtest. To force a new backtest despite existing result for an identical run specify --cache none parameter.
Warning
Caching is automatically disabled for open-ended timeranges (--timerange 20210101-), as freqtrade cannot ensure reliably that the underlying data didn't change. It can also use cached results where it shouldn't if the original backtest had missing data at the end, which was fixed by downloading more data. In this instance, please use --cache none once to force a fresh backtest.
To further analyze your backtest results, freqtrade will export the trades to file by default. You can then load the trades to perform further analysis as shown in the data analysis backtesting section.
Also, you can use freqtrade in webserver mode to visualize the backtest results in a web interface. This mode also allows you to load existing backtest results, so you can analyze them without running the backtest again. For this mode - --notes \"<notes>\" can be used to add notes to the backtest results, which will be shown in the web interface.
The output file freqtrade produces is a zip file containing the following files:
This will ensure results are reproducible - under the assumption that the same data is available.
Only the strategy file and the config file are included in the zip file, eventual dependencies are not included.
"},{"location":"backtesting/#assumptions-made-by-backtesting","title":"Assumptions made by backtesting","text":"Since backtesting lacks some detailed information about what happens within a candle, it needs to take a few assumptions:
120: 0.02 for 1h candles, from 60: 0.05) will use the candle's open as exit rate<N>=-1 ROI entries use low as exit value, unless N falls on the candle open (e.g. 120: -1 for 1h candles)2 * fees higher than the stoploss pricestoploss exit reason comparing to the results obtained with the same strategy in the Dry Run/Live Trade modesstop_positive_offset) is assumed (instead of high) - and the stop is calculated from this point. This rule is NOT applicable to custom-stoploss scenarios, since there's no information about the stoploss logic available.Taking these assumptions, backtesting tries to mirror real trading as closely as possible. However, backtesting will never replace running a strategy in dry-run mode. Also, keep in mind that past results don't guarantee future success.
In addition to the above assumptions, strategy authors should carefully read the Common Mistakes section, to avoid using data in backtesting which is not available in real market conditions.
"},{"location":"backtesting/#trading-limits-in-backtesting","title":"Trading limits in backtesting","text":"Exchanges have certain trading limits, like minimum (and maximum) base currency, or minimum/maximum stake (quote) currency. These limits are usually listed in the exchange documentation as \"trading rules\" or similar and can be quite different between different pairs.
Backtesting (as well as live and dry-run) does honor these limits, and will ensure that a stoploss can be placed below this value - so the value will be slightly higher than what the exchange specifies. Freqtrade has however no information about historic limits.
This can lead to situations where trading-limits are inflated by using a historic price, resulting in minimum amounts > 50$.
For example:
BTC minimum tradable amount is 0.001. BTC trades at 22.000$ today (0.001 BTC is related to this) - but the backtesting period includes prices as high as 50.000$. Today's minimum would be 0.001 * 22_000 - or 22$. However the limit could also be 50$ - based on 0.001 * 50_000 in some historic setting.
Most exchanges pose precision limits on both price and amounts, so you cannot buy 1.0020401 of a pair, or at a price of 1.24567123123. Instead, these prices and amounts will be rounded or truncated (based on the exchange definition) to the defined trading precision. The above values may for example be rounded to an amount of 1.002, and a price of 1.24567.
These precision values are based on current exchange limits (as described in the above section), as historic precision limits are not available.
"},{"location":"backtesting/#improved-backtest-accuracy","title":"Improved backtest accuracy","text":"One big limitation of backtesting is it's inability to know how prices moved intra-candle (was high before close, or vice-versa?). So assuming you run backtesting with a 1h timeframe, there will be 4 prices for that candle (Open, High, Low, Close).
While backtesting does take some assumptions (read above) about this - this can never be perfect, and will always be biased in one way or the other. To mitigate this, freqtrade can use a lower (faster) timeframe to simulate intra-candle movements.
To utilize this, you can append --timeframe-detail 5m to your regular backtesting command.
freqtrade backtesting --strategy AwesomeStrategy --timeframe 1h --timeframe-detail 5m\nThis will load 1h data (the main timeframe) as well as 5m data (detail timeframe) for the selected timerange. The strategy will be analyzed with the 1h timeframe. Candles where activity may take place (there's an active signal, the pair is in a trade) are evaluated at the 5m timeframe. This will allow for a more accurate simulation of intra-candle movements - and can lead to different results, especially on higher timeframes.
Entries will generally still happen at the main candle's open, however freed trade slots may be freed earlier (if the exit signal is triggered on the 5m candle), which can then be used for a new trade of a different pair.
All callback functions (custom_exit(), custom_stoploss(), ... ) will be running for each 5m candle once the trade is opened (so 12 times in the above example of 1h timeframe, and 5m detailed timeframe).
--timeframe-detail must be smaller than the original timeframe, otherwise backtesting will fail to start.
Obviously this will require more memory (5m data is bigger than 1h data), and will also impact runtime (depending on the amount of trades and trade durations). Also, data must be available / downloaded already.
Tip
You can use this function as the last part of strategy development, to ensure your strategy is not exploiting one of the backtesting assumptions. Strategies that perform similarly well with this mode have a good chance to perform well in dry/live modes too (although only forward-testing (dry-mode) can really confirm a strategy).
Extreme Difference ExampleUsing --timeframe-detail on an extreme example (all below pairs have the 10:00 candle with an entry signal) may lead to the following backtesting Trade sequence with 1 max_open_trades:
Without timeframe-detail, this would look like:
Pair Entry Time Exit Time Duration BTC/USDT 2024-01-01 10:00:00 2021-01-01 11:00:00 1h BTC/USDT 2024-01-01 11:00:00 2021-01-01 12:00:00 1hThe difference is significant, as without detail data, only the first max_open_trades signals per candle are evaluated, and the trade slots are only freed at the end of the candle, allowing for a new trade to be opened at the next candle.
To compare multiple strategies, a list of Strategies can be provided to backtesting.
This is limited to 1 timeframe value per run. However, data is only loaded once from disk so if you have multiple strategies you'd like to compare, this will give a nice runtime boost.
All listed Strategies need to be in the same directory, unless also --recursive-strategy-search is specified, where sub-directories within the strategy directory are also considered.
freqtrade backtesting --timerange 20180401-20180410 --timeframe 5m --strategy-list Strategy001 Strategy002 --export trades\nThis will save the results to user_data/backtest_results/backtest-result-<datetime>.json, including results for both Strategy001 and Strategy002. There will be an additional table comparing win/losses of the different strategies (identical to the \"Total\" row in the first table). Detailed output for all strategies one after the other will be available, so make sure to scroll up to see the details per strategy.
================================================== STRATEGY SUMMARY ===================================================================\n| Strategy | Trades | Avg Profit % | Tot Profit BTC | Tot Profit % | Avg Duration | Wins | Draws | Losses | Drawdown % |\n|-------------+---------+----------------+------------------+----------------+----------------+-------+--------+--------+------------|\n| Strategy1 | 429 | 0.36 | 0.00762792 | 76.20 | 4:12:00 | 186 | 0 | 243 | 45.2 |\n| Strategy2 | 1487 | -0.13 | -0.00988917 | -98.79 | 4:43:00 | 662 | 0 | 825 | 241.68 |\nGreat, your strategy is profitable. What if the bot can give you the optimal parameters to use for your strategy? Your next step is to learn how to find optimal parameters with Hyperopt
"},{"location":"bot-basics/","title":"Freqtrade basics","text":"This page provides you some basic concepts on how Freqtrade works and operates.
"},{"location":"bot-basics/#freqtrade-terminology","title":"Freqtrade terminology","text":"XRP/USDT for spot, XRP/USDT:USDT for futures).\"5m\", \"1h\", ...).All profit calculations of Freqtrade include fees. For Backtesting / Hyperopt / Dry-run modes, the exchange default fee is used (lowest tier on the exchange). For live operations, fees are used as applied by the exchange (this includes BNB rebates etc.).
"},{"location":"bot-basics/#pair-naming","title":"Pair naming","text":"Freqtrade follows the ccxt naming convention for currencies. Using the wrong naming convention in the wrong market will usually result in the bot not recognizing the pair, usually resulting in errors like \"this pair is not available\".
"},{"location":"bot-basics/#spot-pair-naming","title":"Spot pair naming","text":"For spot pairs, naming will be base/quote (e.g. ETH/USDT).
For futures pairs, naming will be base/quote:settle (e.g. ETH/USDT:USDT).
Starting freqtrade in dry-run or live mode (using freqtrade trade) will start the bot and start the bot iteration loop. This will also run the bot_start() callback.
By default, the bot loop runs every few seconds (internals.process_throttle_secs) and performs the following actions:
bot_loop_start() strategy callback.populate_indicators()populate_entry_trend()populate_exit_trend()order_filled() strategy callback for filled orders.check_entry_timeout() strategy callback for open entry orders.check_exit_timeout() strategy callback for open exit orders.adjust_order_price() strategy callback for open orders.adjust_entry_price() strategy callback for open entry orders. only called when adjust_order_price() is not implementedadjust_exit_price() strategy callback for open exit orders. only called when adjust_order_price() is not implementedcustom_exit() and custom_stoploss().exit_pricing configuration setting or by using the custom_exit_price() callback.confirm_trade_exit() strategy callback is called.adjust_trade_position() and place additional order if required.max_open_trades is reached).entry_pricing configuration setting, or by using the custom_entry_price() callback.leverage() strategy callback is called to determine the desired leverage.custom_stake_amount() callback.confirm_trade_entry() strategy callback is called.This loop will be repeated again and again until the bot is stopped.
"},{"location":"bot-basics/#backtesting-hyperopt-execution-logic","title":"Backtesting / Hyperopt execution logic","text":"backtesting or hyperopt do only part of the above logic, since most of the trading operations are fully simulated.
bot_start() once.populate_indicators() once per pair).populate_entry_trend() and populate_exit_trend() once per pair).bot_loop_start() strategy callback.unfilledtimeout configuration, or via check_entry_timeout() / check_exit_timeout() strategy callbacks.adjust_order_price() strategy callback for open orders.adjust_entry_price() strategy callback for open entry orders. only called when adjust_order_price() is not implemented!adjust_exit_price() strategy callback for open exit orders. only called when adjust_order_price() is not implemented!enter_long / enter_short columns).confirm_trade_entry() and confirm_trade_exit() if implemented in the strategy).custom_entry_price() (if implemented in the strategy) to determine entry price (Prices are moved to be within the opening candle).leverage() strategy callback is called to determine the desired leverage.custom_stake_amount() callback.adjust_trade_position() to determine if an additional order is requested.order_filled() strategy callback for filled entry orders.custom_stoploss() and custom_exit() to find custom exit points.custom_exit_price() to determine exit price (Prices are moved to be within the closing candle).order_filled() strategy callback for filled exit orders.Note
Both Backtesting and Hyperopt include exchange default Fees in the calculation. Custom fees can be passed to backtesting / hyperopt by specifying the --fee argument.
Callback call frequency
Backtesting will call each callback at max. once per candle (--timeframe-detail modifies this behavior to once per detailed candle). Most callbacks will be called once per iteration in live (usually every ~5s) - which can cause backtesting mismatches.
This page explains the different parameters of the bot and how to run it.
Note
If you've used setup.sh, don't forget to activate your virtual environment (source .venv/bin/activate) before running freqtrade commands.
Up-to-date clock
The clock on the system running the bot must be accurate, synchronized to a NTP server frequently enough to avoid problems with communication to the exchanges.
"},{"location":"bot-usage/#bot-commands","title":"Bot commands","text":"usage: freqtrade [-h] [-V]\n {trade,create-userdir,new-config,show-config,new-strategy,download-data,convert-data,convert-trade-data,trades-to-ohlcv,list-data,backtesting,backtesting-show,backtesting-analysis,edge,hyperopt,hyperopt-list,hyperopt-show,list-exchanges,list-markets,list-pairs,list-strategies,list-hyperoptloss,list-freqaimodels,list-timeframes,show-trades,test-pairlist,convert-db,install-ui,plot-dataframe,plot-profit,webserver,strategy-updater,lookahead-analysis,recursive-analysis}\n ...\n\nFree, open source crypto trading bot\n\npositional arguments:\n {trade,create-userdir,new-config,show-config,new-strategy,download-data,convert-data,convert-trade-data,trades-to-ohlcv,list-data,backtesting,backtesting-show,backtesting-analysis,edge,hyperopt,hyperopt-list,hyperopt-show,list-exchanges,list-markets,list-pairs,list-strategies,list-hyperoptloss,list-freqaimodels,list-timeframes,show-trades,test-pairlist,convert-db,install-ui,plot-dataframe,plot-profit,webserver,strategy-updater,lookahead-analysis,recursive-analysis}\n trade Trade module.\n create-userdir Create user-data directory.\n new-config Create new config\n show-config Show resolved config\n new-strategy Create new strategy\n download-data Download backtesting data.\n convert-data Convert candle (OHLCV) data from one format to\n another.\n convert-trade-data Convert trade data from one format to another.\n trades-to-ohlcv Convert trade data to OHLCV data.\n list-data List downloaded data.\n backtesting Backtesting module.\n backtesting-show Show past Backtest results\n backtesting-analysis\n Backtest Analysis module.\n edge Edge module. No longer part of Freqtrade\n hyperopt Hyperopt module.\n hyperopt-list List Hyperopt results\n hyperopt-show Show details of Hyperopt results\n list-exchanges Print available exchanges.\n list-markets Print markets on exchange.\n list-pairs Print pairs on exchange.\n list-strategies Print available strategies.\n list-hyperoptloss Print available hyperopt loss functions.\n list-freqaimodels Print available freqAI models.\n list-timeframes Print available timeframes for the exchange.\n show-trades Show trades.\n test-pairlist Test your pairlist configuration.\n convert-db Migrate database to different system\n install-ui Install FreqUI\n plot-dataframe Plot candles with indicators.\n plot-profit Generate plot showing profits.\n webserver Webserver module.\n strategy-updater updates outdated strategy files to the current version\n lookahead-analysis Check for potential look ahead bias.\n recursive-analysis Check for potential recursive formula issue.\n\noptions:\n -h, --help show this help message and exit\n -V, --version show program's version number and exit\nusage: freqtrade trade [-h] [-v] [--no-color] [--logfile FILE] [-V] [-c PATH]\n [-d PATH] [--userdir PATH] [-s NAME]\n [--strategy-path PATH] [--recursive-strategy-search]\n [--freqaimodel NAME] [--freqaimodel-path PATH]\n [--db-url PATH] [--sd-notify] [--dry-run]\n [--dry-run-wallet DRY_RUN_WALLET] [--fee FLOAT]\n\noptions:\n -h, --help show this help message and exit\n --db-url PATH Override trades database URL, this is useful in custom\n deployments (default: `sqlite:///tradesv3.sqlite` for\n Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for\n Dry Run).\n --sd-notify Notify systemd service manager.\n --dry-run Enforce dry-run for trading (removes Exchange secrets\n and simulates trades).\n --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET\n Starting balance, used for backtesting / hyperopt and\n dry-runs.\n --fee FLOAT Specify fee ratio. Will be applied twice (on trade\n entry and exit).\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n\nStrategy arguments:\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n --freqaimodel NAME Specify a custom freqaimodels.\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\nThe bot allows you to select which configuration file you want to use by means of the -c/--config command line option:
freqtrade trade -c path/far/far/away/config.json\nPer default, the bot loads the config.json configuration file from the current working directory.
The bot allows you to use multiple configuration files by specifying multiple -c/--config options in the command line. Configuration parameters defined in the latter configuration files override parameters with the same name defined in the previous configuration files specified in the command line earlier.
For example, you can make a separate configuration file with your key and secret for the Exchange you use for trading, specify default configuration file with empty key and secret values while running in the Dry Mode (which does not actually require them):
freqtrade trade -c ./config.json\nand specify both configuration files when running in the normal Live Trade Mode:
freqtrade trade -c ./config.json -c path/to/secrets/keys.config.json\nThis could help you hide your private Exchange key and Exchange secret on you local machine by setting appropriate file permissions for the file which contains actual secrets and, additionally, prevent unintended disclosure of sensitive private data when you publish examples of your configuration in the project issues or in the Internet.
See more details on this technique with examples in the documentation page on configuration.
"},{"location":"bot-usage/#where-to-store-custom-data","title":"Where to store custom data","text":"Freqtrade allows the creation of a user-data directory using freqtrade create-userdir --userdir someDirectory. This directory will look as follows:
user_data/\n\u251c\u2500\u2500 backtest_results\n\u251c\u2500\u2500 data\n\u251c\u2500\u2500 hyperopts\n\u251c\u2500\u2500 hyperopt_results\n\u251c\u2500\u2500 plot\n\u2514\u2500\u2500 strategies\nYou can add the entry \"user_data_dir\" setting to your configuration, to always point your bot to this directory. Alternatively, pass in --userdir to every command. The bot will fail to start if the directory does not exist, but will create necessary subdirectories.
This directory should contain your custom strategies, custom hyperopts and hyperopt loss functions, backtesting historical data (downloaded using either backtesting command or the download script) and plot outputs.
It is recommended to use version control to keep track of changes to your strategies.
"},{"location":"bot-usage/#how-to-use-strategy","title":"How to use --strategy?","text":"This parameter will allow you to load your custom strategy class. To test the bot installation, you can use the SampleStrategy installed by the create-userdir subcommand (usually user_data/strategy/sample_strategy.py).
The bot will search your strategy file within user_data/strategies. To use other directories, please read the next section about --strategy-path.
To load a strategy, simply pass the class name (e.g.: CustomStrategy) in this parameter.
Example: In user_data/strategies you have a file my_awesome_strategy.py which has a strategy class called AwesomeStrategy to load it:
freqtrade trade --strategy AwesomeStrategy\nIf the bot does not find your strategy file, it will display in an error message the reason (File not found, or errors in your code).
Learn more about strategy file in Strategy Customization.
"},{"location":"bot-usage/#how-to-use-strategy-path","title":"How to use --strategy-path?","text":"This parameter allows you to add an additional strategy lookup path, which gets checked before the default locations (The passed path must be a directory!):
freqtrade trade --strategy AwesomeStrategy --strategy-path /some/directory\nThis is very simple. Copy paste your strategy file into the directory user_data/strategies or use --strategy-path. And voila, the bot is ready to use it.
When you run the bot in Dry-run mode, per default no transactions are stored in a database. If you want to store your bot actions in a DB using --db-url. This can also be used to specify a custom database in production mode. Example command:
freqtrade trade -c config.json --db-url sqlite:///tradesv3.dry_run.sqlite\nThe optimal strategy of the bot will change with time depending of the market trends. The next step is to Strategy Customization.
"},{"location":"configuration/","title":"Configure the bot","text":"Freqtrade has many configurable features and possibilities. By default, these settings are configured via the configuration file (see below).
"},{"location":"configuration/#the-freqtrade-configuration-file","title":"The Freqtrade configuration file","text":"The bot uses a set of configuration parameters during its operation that all together conform to the bot configuration. It normally reads its configuration from a file (Freqtrade configuration file).
Per default, the bot loads the configuration from the config.json file, located in the current working directory.
You can specify a different configuration file used by the bot with the -c/--config command-line option.
If you used the Quick start method for installing the bot, the installation script should have already created the default configuration file (config.json) for you.
If the default configuration file is not created we recommend to use freqtrade new-config --config user_data/config.json to generate a basic configuration file.
The Freqtrade configuration file is to be written in JSON format.
Additionally to the standard JSON syntax, you may use one-line // ... and multi-line /* ... */ comments in your configuration files and trailing commas in the lists of parameters.
Do not worry if you are not familiar with JSON format -- simply open the configuration file with an editor of your choice, make some changes to the parameters you need, save your changes and, finally, restart the bot or, if it was previously stopped, run it again with the changes you made to the configuration. The bot validates the syntax of the configuration file at startup and will warn you if you made any errors editing it, pointing out problematic lines.
"},{"location":"configuration/#environment-variables","title":"Environment variables","text":"Set options in the Freqtrade configuration via environment variables. This takes priority over the corresponding value in configuration or strategy.
Environment variables must be prefixed with FREQTRADE__ to be loaded to the freqtrade configuration.
__ serves as level separator, so the format used should correspond to FREQTRADE__{section}__{key}. As such - an environment variable defined as export FREQTRADE__STAKE_AMOUNT=200 would result in {stake_amount: 200}.
A more complex example might be export FREQTRADE__EXCHANGE__KEY=<yourExchangeKey> to keep your exchange key secret. This will move the value to the exchange.key section of the configuration. Using this scheme, all configuration settings will also be available as environment variables.
Please note that Environment variables will overwrite corresponding settings in your configuration, but command line Arguments will always win.
Common example:
FREQTRADE__TELEGRAM__CHAT_ID=<telegramchatid>\nFREQTRADE__TELEGRAM__TOKEN=<telegramToken>\nFREQTRADE__EXCHANGE__KEY=<yourExchangeKey>\nFREQTRADE__EXCHANGE__SECRET=<yourExchangeSecret>\nJson lists are parsed as json - so you can use the following to set a list of pairs:
export FREQTRADE__EXCHANGE__PAIR_WHITELIST='[\"BTC/USDT\", \"ETH/USDT\"]'\nNote
Environment variables detected are logged at startup - so if you can't find why a value is not what you think it should be based on the configuration, make sure it's not loaded from an environment variable.
Validate combined result
You can use the show-config subcommand to see the final, combined configuration.
Loading sequenceEnvironment variables are loaded after the initial configuration. As such, you cannot provide the path to the configuration through environment variables. Please use --config path/to/config.json for that. This also applies to user_dir to some degree. while the user directory can be set through environment variables - the configuration will not be loaded from that location.
Multiple configuration files can be specified and used by the bot or the bot can read its configuration parameters from the process standard input stream.
You can specify additional configuration files in add_config_files. Files specified in this parameter will be loaded and merged with the initial config file. The files are resolved relative to the initial configuration file. This is similar to using multiple --config parameters, but simpler in usage as you don't have to specify all files for all commands.
Validate combined result
You can use the show-config subcommand to see the final, combined configuration.
Use multiple configuration files to keep secrets secret
You can use a 2nd configuration file containing your secrets. That way you can share your \"primary\" configuration file, while still keeping your API keys for yourself. The 2nd file should only specify what you intend to override. If a key is in more than one of the configurations, then the \"last specified configuration\" wins (in the above example, config-private.json).
For one-off commands, you can also use the below syntax by specifying multiple \"--config\" parameters.
freqtrade trade --config user_data/config1.json --config user_data/config-private.json <...>\nThe below is equivalent to the example above - but having 2 configuration files in the configuration, for easier reuse.
user_data/config.json\"add_config_files\": [\n \"config1.json\",\n \"config-private.json\"\n]\nfreqtrade trade --config user_data/config.json <...>\nIf the same configuration setting takes place in both config.json and config-import.json, then the parent configuration wins. In the below case, max_open_trades would be 3 after the merging - as the reusable \"import\" configuration has this key overwritten.
{\n \"max_open_trades\": 3,\n \"stake_currency\": \"USDT\",\n \"add_config_files\": [\n \"config-import.json\"\n ]\n}\n{\n \"max_open_trades\": 10,\n \"stake_amount\": \"unlimited\",\n}\nResulting combined configuration:
Result{\n \"max_open_trades\": 3,\n \"stake_currency\": \"USDT\",\n \"stake_amount\": \"unlimited\"\n}\nIf multiple files are in the add_config_files section, then they will be assumed to be at identical levels, having the last occurrence override the earlier config (unless a parent already defined such a key).
If you are using an editor that supports JSON schema, you can use the schema provided by Freqtrade to get autocompletion and validation of your configuration file by adding the following line to the top of your configuration file:
{\n \"$schema\": \"https://schema.freqtrade.io/schema.json\",\n}\nThe develop schema is available as https://schema.freqtrade.io/schema_dev.json - though we recommend to stick to the stable version for the best experience.
The table below will list all configuration parameters available.
Freqtrade can also load many options via command line (CLI) arguments (check out the commands --help output for details).
The prevalence for all Options is as follows:
Mandatory parameters are marked as Required, which means that they are required to be set in one of the possible ways.
Parameter Descriptionmax_open_trades Required. Number of open trades your bot is allowed to have. Only one open trade per pair is possible, so the length of your pairlist is another limitation that can apply. If -1 then it is ignored (i.e. potentially unlimited open trades, limited by the pairlist). More information below. Strategy Override. Datatype: Positive integer or -1. stake_currency Required. Crypto-currency used for trading. Datatype: String stake_amount Required. Amount of crypto-currency your bot will use for each trade. Set it to \"unlimited\" to allow the bot to use all available balance. More information below. Datatype: Positive float or \"unlimited\". tradable_balance_ratio Ratio of the total account balance the bot is allowed to trade. More information below. Defaults to 0.99 99%). Datatype: Positive float between 0.1 and 1.0. available_capital Available starting capital for the bot. Useful when running multiple bots on the same exchange account. More information below. Datatype: Positive float. amend_last_stake_amount Use reduced last stake amount if necessary. More information below. Defaults to false. Datatype: Boolean last_stake_amount_min_ratio Defines minimum stake amount that has to be left and executed. Applies only to the last stake amount when it's amended to a reduced value (i.e. if amend_last_stake_amount is set to true). More information below. Defaults to 0.5. Datatype: Float (as ratio) amount_reserve_percent Reserve some amount in min pair stake amount. The bot will reserve amount_reserve_percent + stoploss value when calculating min pair stake amount in order to avoid possible trade refusals. Defaults to 0.05 (5%). Datatype: Positive Float as ratio. timeframe The timeframe to use (e.g 1m, 5m, 15m, 30m, 1h ...). Usually missing in configuration, and specified in the strategy. Strategy Override. Datatype: String fiat_display_currency Fiat currency used to show your profits. More information below. Datatype: String dry_run Required. Define if the bot must be in Dry Run or production mode. Defaults to true. Datatype: Boolean dry_run_wallet Define the starting amount in stake currency for the simulated wallet used by the bot running in Dry Run mode. More information belowDefaults to 1000. Datatype: Float or Dict cancel_open_orders_on_exit Cancel open orders when the /stop RPC command is issued, Ctrl+C is pressed or the bot dies unexpectedly. When set to true, this allows you to use /stop to cancel unfilled and partially filled orders in the event of a market crash. It does not impact open positions. Defaults to false. Datatype: Boolean process_only_new_candles Enable processing of indicators only when new candles arrive. If false each loop populates the indicators, this will mean the same candle is processed many times creating system load but can be useful of your strategy depends on tick data not only candle. Strategy Override. Defaults to true. Datatype: Boolean minimal_roi Required. Set the threshold as ratio the bot will use to exit a trade. More information below. Strategy Override. Datatype: Dict stoploss Required. Value as ratio of the stoploss used by the bot. More details in the stoploss documentation. Strategy Override. Datatype: Float (as ratio) trailing_stop Enables trailing stoploss (based on stoploss in either configuration or strategy file). More details in the stoploss documentation. Strategy Override. Datatype: Boolean trailing_stop_positive Changes stoploss once profit has been reached. More details in the stoploss documentation. Strategy Override. Datatype: Float trailing_stop_positive_offset Offset on when to apply trailing_stop_positive. Percentage value which should be positive. More details in the stoploss documentation. Strategy Override. Defaults to 0.0 (no offset). Datatype: Float trailing_only_offset_is_reached Only apply trailing stoploss when the offset is reached. stoploss documentation. Strategy Override. Defaults to false. Datatype: Boolean fee Fee used during backtesting / dry-runs. Should normally not be configured, which has freqtrade fall back to the exchange default fee. Set as ratio (e.g. 0.001 = 0.1%). Fee is applied twice for each trade, once when buying, once when selling. Datatype: Float (as ratio) futures_funding_rate User-specified funding rate to be used when historical funding rates are not available from the exchange. This does not overwrite real historical rates. It is recommended that this be set to 0 unless you are testing a specific coin and you understand how the funding rate will affect freqtrade's profit calculations. More information here Defaults to None. Datatype: Float trading_mode Specifies if you want to trade regularly, trade with leverage, or trade contracts whose prices are derived from matching cryptocurrency prices. leverage documentation. Defaults to \"spot\". Datatype: String margin_mode When trading with leverage, this determines if the collateral owned by the trader will be shared or isolated to each trading pair leverage documentation. Datatype: String liquidation_buffer A ratio specifying how large of a safety net to place between the liquidation price and the stoploss to prevent a position from reaching the liquidation price leverage documentation. Defaults to 0.05. Datatype: Float Unfilled timeout unfilledtimeout.entry Required. How long (in minutes or seconds) the bot will wait for an unfilled entry order to complete, after which the order will be cancelled. Strategy Override. Datatype: Integer unfilledtimeout.exit Required. How long (in minutes or seconds) the bot will wait for an unfilled exit order to complete, after which the order will be cancelled and repeated at current (new) price, as long as there is a signal. Strategy Override. Datatype: Integer unfilledtimeout.unit Unit to use in unfilledtimeout setting. Note: If you set unfilledtimeout.unit to \"seconds\", \"internals.process_throttle_secs\" must be inferior or equal to timeout Strategy Override. Defaults to \"minutes\". Datatype: String unfilledtimeout.exit_timeout_count How many times can exit orders time out. Once this number of timeouts is reached, an emergency exit is triggered. 0 to disable and allow unlimited order cancels. Strategy Override.Defaults to 0. Datatype: Integer Pricing entry_pricing.price_side Select the side of the spread the bot should look at to get the entry rate. More information below. Defaults to \"same\". Datatype: String (either ask, bid, same or other). entry_pricing.price_last_balance Required. Interpolate the bidding price. More information below. entry_pricing.use_order_book Enable entering using the rates in Order Book Entry. Defaults to true. Datatype: Boolean entry_pricing.order_book_top Bot will use the top N rate in Order Book \"price_side\" to enter a trade. I.e. a value of 2 will allow the bot to pick the 2nd entry in Order Book Entry. Defaults to 1. Datatype: Positive Integer entry_pricing. check_depth_of_market.enabled Do not enter if the difference of buy orders and sell orders is met in Order Book. Check market depth. Defaults to false. Datatype: Boolean entry_pricing. check_depth_of_market.bids_to_ask_delta The difference ratio of buy orders and sell orders found in Order Book. A value below 1 means sell order size is greater, while value greater than 1 means buy order size is higher. Check market depth Defaults to 0. Datatype: Float (as ratio) exit_pricing.price_side Select the side of the spread the bot should look at to get the exit rate. More information below. Defaults to \"same\". Datatype: String (either ask, bid, same or other). exit_pricing.price_last_balance Interpolate the exiting price. More information below. exit_pricing.use_order_book Enable exiting of open trades using Order Book Exit. Defaults to true. Datatype: Boolean exit_pricing.order_book_top Bot will use the top N rate in Order Book \"price_side\" to exit. I.e. a value of 2 will allow the bot to pick the 2nd ask rate in Order Book ExitDefaults to 1. Datatype: Positive Integer custom_price_max_distance_ratio Configure maximum distance ratio between current and custom entry or exit price. Defaults to 0.02 2%). Datatype: Positive float Order/Signal handling use_exit_signal Use exit signals produced by the strategy in addition to the minimal_roi. Setting this to false disables the usage of \"exit_long\" and \"exit_short\" columns. Has no influence on other exit methods (Stoploss, ROI, callbacks). Strategy Override. Defaults to true. Datatype: Boolean exit_profit_only Wait until the bot reaches exit_profit_offset before taking an exit decision. Strategy Override. Defaults to false. Datatype: Boolean exit_profit_offset Exit-signal is only active above this value. Only active in combination with exit_profit_only=True. Strategy Override. Defaults to 0.0. Datatype: Float (as ratio) ignore_roi_if_entry_signal Do not exit if the entry signal is still active. This setting takes preference over minimal_roi and use_exit_signal. Strategy Override. Defaults to false. Datatype: Boolean ignore_buying_expired_candle_after Specifies the number of seconds until a buy signal is no longer used. Datatype: Integer order_types Configure order-types depending on the action (\"entry\", \"exit\", \"stoploss\", \"stoploss_on_exchange\"). More information below. Strategy Override. Datatype: Dict order_time_in_force Configure time in force for entry and exit orders. More information below. Strategy Override. Datatype: Dict position_adjustment_enable Enables the strategy to use position adjustments (additional buys or sells). More information here. Strategy Override. Defaults to false. Datatype: Boolean max_entry_position_adjustment Maximum additional order(s) for each open trade on top of the first entry Order. Set it to -1 for unlimited additional orders. More information here. Strategy Override. Defaults to -1. Datatype: Positive Integer or -1 Exchange exchange.name Required. Name of the exchange class to use. Datatype: String exchange.key API key to use for the exchange. Only required when you are in production mode.Keep it in secret, do not disclose publicly. Datatype: String exchange.secret API secret to use for the exchange. Only required when you are in production mode.Keep it in secret, do not disclose publicly. Datatype: String exchange.password API password to use for the exchange. Only required when you are in production mode and for exchanges that use password for API requests.Keep it in secret, do not disclose publicly. Datatype: String exchange.uid API uid to use for the exchange. Only required when you are in production mode and for exchanges that use uid for API requests.Keep it in secret, do not disclose publicly. Datatype: String exchange.pair_whitelist List of pairs to use by the bot for trading and to check for potential trades during backtesting. Supports regex pairs as .*/BTC. Not used by VolumePairList. More information. Datatype: List exchange.pair_blacklist List of pairs the bot must absolutely avoid for trading and backtesting. More information. Datatype: List exchange.ccxt_config Additional CCXT parameters passed to both ccxt instances (sync and async). This is usually the correct place for additional ccxt configurations. Parameters may differ from exchange to exchange and are documented in the ccxt documentation. Please avoid adding exchange secrets here (use the dedicated fields instead), as they may be contained in logs. Datatype: Dict exchange.ccxt_sync_config Additional CCXT parameters passed to the regular (sync) ccxt instance. Parameters may differ from exchange to exchange and are documented in the ccxt documentation Datatype: Dict exchange.ccxt_async_config Additional CCXT parameters passed to the async ccxt instance. Parameters may differ from exchange to exchange and are documented in the ccxt documentation Datatype: Dict exchange.enable_ws Enable the usage of Websockets for the exchange. More information.Defaults to true. Datatype: Boolean exchange.markets_refresh_interval The interval in minutes in which markets are reloaded. Defaults to 60 minutes. Datatype: Positive Integer exchange.skip_open_order_update Skips open order updates on startup should the exchange cause problems. Only relevant in live conditions.Defaults to false Datatype: Boolean exchange.unknown_fee_rate Fallback value to use when calculating trading fees. This can be useful for exchanges which have fees in non-tradable currencies. The value provided here will be multiplied with the \"fee cost\".Defaults to None Datatype:* float exchange.log_responses Log relevant exchange responses. For debug mode only - use with care.Defaults to false Datatype: Boolean exchange.only_from_ccxt Prevent data-download from data.binance.vision. Leaving this as false can greatly speed up downloads, but may be problematic if the site is not available.Defaults to false Datatype: Boolean experimental.block_bad_exchanges Block exchanges known to not work with freqtrade. Leave on default unless you want to test if that exchange works now. Defaults to true. Datatype: Boolean Plugins pairlists Define one or more pairlists to be used. More information. Defaults to StaticPairList. Datatype: List of Dicts Telegram telegram.enabled Enable the usage of Telegram. Datatype: Boolean telegram.token Your Telegram bot token. Only required if telegram.enabled is true. Keep it in secret, do not disclose publicly. Datatype: String telegram.chat_id Your personal Telegram account id. Only required if telegram.enabled is true. Keep it in secret, do not disclose publicly. Datatype: String telegram.balance_dust_level Dust-level (in stake currency) - currencies with a balance below this will not be shown by /balance. Datatype: float telegram.reload Allow \"reload\" buttons on telegram messages. Defaults to true. Datatype:* boolean telegram.notification_settings.* Detailed notification settings. Refer to the telegram documentation for details. Datatype: dictionary telegram.allow_custom_messages Enable the sending of Telegram messages from strategies via the dataprovider.send_msg() function. Datatype: Boolean Webhook webhook.enabled Enable usage of Webhook notifications Datatype: Boolean webhook.url URL for the webhook. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.entry Payload to send on entry. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.entry_cancel Payload to send on entry order cancel. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.entry_fill Payload to send on entry order filled. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.exit Payload to send on exit. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.exit_cancel Payload to send on exit order cancel. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.exit_fill Payload to send on exit order filled. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.status Payload to send on status calls. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.allow_custom_messages Enable the sending of Webhook messages from strategies via the dataprovider.send_msg() function. Datatype: Boolean Rest API / FreqUI / Producer-Consumer api_server.enabled Enable usage of API Server. See the API Server documentation for more details. Datatype: Boolean api_server.listen_ip_address Bind IP address. See the API Server documentation for more details. Datatype: IPv4 api_server.listen_port Bind Port. See the API Server documentation for more details. Datatype: Integer between 1024 and 65535 api_server.verbosity Logging verbosity. info will print all RPC Calls, while \"error\" will only display errors. Datatype: Enum, either info or error. Defaults to info. api_server.username Username for API server. See the API Server documentation for more details. Keep it in secret, do not disclose publicly. Datatype: String api_server.password Password for API server. See the API Server documentation for more details. Keep it in secret, do not disclose publicly. Datatype: String api_server.ws_token API token for the Message WebSocket. See the API Server documentation for more details. Keep it in secret, do not disclose publicly. Datatype: String bot_name Name of the bot. Passed via API to a client - can be shown to distinguish / name bots. Defaults to freqtrade Datatype: String external_message_consumer Enable Producer/Consumer mode for more details. Datatype: Dict Other initial_state Defines the initial application state. If set to stopped, then the bot has to be explicitly started via /start RPC command. Defaults to stopped. Datatype: Enum, either running, paused or stopped force_entry_enable Enables the RPC Commands to force a Trade entry. More information below. Datatype: Boolean disable_dataframe_checks Disable checking the OHLCV dataframe returned from the strategy methods for correctness. Only use when intentionally changing the dataframe and understand what you are doing. Strategy Override. Defaults to False. Datatype: Boolean internals.process_throttle_secs Set the process throttle, or minimum loop duration for one bot iteration loop. Value in second. Defaults to 5 seconds. Datatype: Positive Integer internals.heartbeat_interval Print heartbeat message every N seconds. Set to 0 to disable heartbeat messages. Defaults to 60 seconds. Datatype: Positive Integer or 0 internals.sd_notify Enables use of the sd_notify protocol to tell systemd service manager about changes in the bot state and issue keep-alive pings. See here for more details. Datatype: Boolean strategy Required Defines Strategy class to use. Recommended to be set via --strategy NAME. Datatype: ClassName strategy_path Adds an additional strategy lookup path (must be a directory). Datatype: String recursive_strategy_search Set to true to recursively search sub-directories inside user_data/strategies for a strategy. Datatype: Boolean user_data_dir Directory containing user data. Defaults to ./user_data/. Datatype: String db_url Declares database URL to use. NOTE: This defaults to sqlite:///tradesv3.dryrun.sqlite if dry_run is true, and to sqlite:///tradesv3.sqlite for production instances. Datatype: String, SQLAlchemy connect string logfile Specifies logfile name. Uses a rolling strategy for log file rotation for 10 files with the 1MB limit per file. Datatype: String add_config_files Additional config files. These files will be loaded and merged with the current config file. The files are resolved relative to the initial file. Defaults to []. Datatype: List of strings dataformat_ohlcv Data format to use to store historical candle (OHLCV) data. Defaults to feather. Datatype: String dataformat_trades Data format to use to store historical trades data. Defaults to feather. Datatype: String reduce_df_footprint Recast all numeric columns to float32/int32, with the objective of reducing ram/disk usage (and decreasing train/inference timing backtesting/hyperopt and in FreqAI). Datatype: Boolean. Default: False. log_config Dictionary containing the log config for python logging. more info Datatype: dict. Default: FtRichHandler"},{"location":"configuration/#parameters-in-the-strategy","title":"Parameters in the strategy","text":"The following parameters can be set in the configuration file or strategy. Values set in the configuration file always overwrite values set in the strategy.
minimal_roitimeframestoplossmax_open_tradestrailing_stoptrailing_stop_positivetrailing_stop_positive_offsettrailing_only_offset_is_reacheduse_custom_stoplossprocess_only_new_candlesorder_typesorder_time_in_forceunfilledtimeoutdisable_dataframe_checksuse_exit_signalexit_profit_onlyexit_profit_offsetignore_roi_if_entry_signalignore_buying_expired_candle_afterposition_adjustment_enablemax_entry_position_adjustmentThere are several methods to configure how much of the stake currency the bot will use to enter a trade. All methods respect the available balance configuration as explained below.
"},{"location":"configuration/#minimum-trade-stake","title":"Minimum trade stake","text":"The minimum stake amount will depend on exchange and pair and is usually listed in the exchange support pages.
Assuming the minimum tradable amount for XRP/USD is 20 XRP (given by the exchange), and the price is 0.6$, the minimum stake amount to buy this pair is 20 * 0.6 ~= 12. This exchange has also a limit on USD - where all orders must be > 10$ - which however does not apply in this case.
To guarantee safe execution, freqtrade will not allow buying with a stake-amount of 10.1$, instead, it'll make sure that there's enough space to place a stoploss below the pair (+ an offset, defined by amount_reserve_percent, which defaults to 5%).
With a reserve of 5%, the minimum stake amount would be ~12.6$ (12 * (1 + 0.05)). If we take into account a stoploss of 10% on top of that - we'd end up with a value of ~14$ (12.6 / (1 - 0.1)).
To limit this calculation in case of large stoploss values, the calculated minimum stake-limit will never be more than 50% above the real limit.
Warning
Since the limits on exchanges are usually stable and are not updated often, some pairs can show pretty high minimum limits, simply because the price increased a lot since the last limit adjustment by the exchange. Freqtrade adjusts the stake-amount to this value, unless it's > 30% more than the calculated/desired stake-amount - in which case the trade is rejected.
"},{"location":"configuration/#dry-run-wallet","title":"Dry-run wallet","text":"When running in dry-run mode, the bot will use a simulated wallet to execute trades. The starting balance of this wallet is defined by dry_run_wallet (defaults to 1000). For more complex scenarios, you can also assign a dictionary to dry_run_wallet to define the starting balance for each currency.
\"dry_run_wallet\": {\n \"BTC\": 0.01,\n \"ETH\": 2,\n \"USDT\": 1000\n}\nCommand line options (--dry-run-wallet) can be used to override the configuration value, but only for the float value, not for the dictionary. If you'd like to use the dictionary, please adjust the configuration file.
Note
Balances not in stake-currency will not be used for trading, but are shown as part of the wallet balance. On Cross-margin exchanges, the wallet balance may be used to calculate the available collateral for trading.
"},{"location":"configuration/#tradable-balance","title":"Tradable balance","text":"By default, the bot assumes that the complete amount - 1% is at it's disposal, and when using dynamic stake amount, it will split the complete balance into max_open_trades buckets per trade. Freqtrade will reserve 1% for eventual fees when entering a trade and will therefore not touch that by default.
You can configure the \"untouched\" amount by using the tradable_balance_ratio setting.
For example, if you have 10 ETH available in your wallet on the exchange and tradable_balance_ratio=0.5 (which is 50%), then the bot will use a maximum amount of 5 ETH for trading and considers this as an available balance. The rest of the wallet is untouched by the trades.
Danger
This setting should not be used when running multiple bots on the same account. Please look at Available Capital to the bot instead.
Warning
The tradable_balance_ratio setting applies to the current balance (free balance + tied up in trades). Therefore, assuming the starting balance of 1000, a configuration with tradable_balance_ratio=0.99 will not guarantee that 10 currency units will always remain available on the exchange. For example, the free amount may reduce to 5 units if the total balance is reduced to 500 (either by a losing streak or by withdrawing balance).
To fully utilize compounding profits when using multiple bots on the same exchange account, you'll want to limit each bot to a certain starting balance. This can be accomplished by setting available_capital to the desired starting balance.
Assuming your account has 10000 USDT and you want to run 2 different strategies on this exchange. You'd set available_capital=5000 - granting each bot an initial capital of 5000 USDT. The bot will then split this starting balance equally into max_open_trades buckets. Profitable trades will result in increased stake-sizes for this bot - without affecting the stake-sizes of the other bot.
Adjusting available_capital requires reloading the configuration to take effect. Adjusting the available_capital adds the difference between the previous available_capital and the new available_capital. Decreasing the available capital when trades are open doesn't exit the trades. The difference is returned to the wallet when the trades conclude. The outcome of this differs depending on the price movement between the adjustment and exiting the trades.
Incompatible with tradable_balance_ratio
Setting this option will replace any configuration of tradable_balance_ratio.
Assuming we have the tradable balance of 1000 USDT, stake_amount=400, and max_open_trades=3. The bot would open 2 trades and will be unable to fill the last trading slot, since the requested 400 USDT are no longer available since 800 USDT are already tied in other trades.
To overcome this, the option amend_last_stake_amount can be set to True, which will enable the bot to reduce stake_amount to the available balance to fill the last trade slot.
In the example above this would mean:
Note
This option only applies with Static stake amount - since Dynamic stake amount divides the balances evenly.
Note
The minimum last stake amount can be configured using last_stake_amount_min_ratio - which defaults to 0.5 (50%). This means that the minimum stake amount that's ever used is stake_amount * 0.5. This avoids very low stake amounts, that are close to the minimum tradable amount for the pair and can be refused by the exchange.
The stake_amount configuration statically configures the amount of stake-currency your bot will use for each trade.
The minimal configuration value is 0.0001, however, please check your exchange's trading minimums for the stake currency you're using to avoid problems.
This setting works in combination with max_open_trades. The maximum capital engaged in trades is stake_amount * max_open_trades. For example, the bot will at most use (0.05 BTC x 3) = 0.15 BTC, assuming a configuration of max_open_trades=3 and stake_amount=0.05.
Note
This setting respects the available balance configuration.
"},{"location":"configuration/#dynamic-stake-amount","title":"Dynamic stake amount","text":"Alternatively, you can use a dynamic stake amount, which will use the available balance on the exchange, and divide that equally by the number of allowed trades (max_open_trades).
To configure this, set stake_amount=\"unlimited\". We also recommend to set tradable_balance_ratio=0.99 (99%) - to keep a minimum balance for eventual fees.
In this case a trade amount is calculated as:
currency_balance / (max_open_trades - current_open_trades)\nTo allow the bot to trade all the available stake_currency in your account (minus tradable_balance_ratio) set
\"stake_amount\" : \"unlimited\",\n\"tradable_balance_ratio\": 0.99,\nCompounding profits
This configuration will allow increasing/decreasing stakes depending on the performance of the bot (lower stake if the bot is losing, higher stakes if the bot has a winning record since higher balances are available), and will result in profit compounding.
When using Dry-Run Mode
When using \"stake_amount\" : \"unlimited\", in combination with Dry-Run, Backtesting or Hyperopt, the balance will be simulated starting with a stake of dry_run_wallet which will evolve. It is therefore important to set dry_run_wallet to a sensible value (like 0.05 or 0.01 for BTC and 1000 or 100 for USDT, for example), otherwise, it may simulate trades with 100 BTC (or more) or 0.05 USDT (or less) at once - which may not correspond to your real available balance or is less than the exchange minimal limit for the order amount for the stake currency.
When you want to use position adjustment with unlimited stakes, you must also implement custom_stake_amount to a return a value depending on your strategy. Typical value would be in the range of 25% - 50% of the proposed stakes, but depends highly on your strategy and how much you wish to leave into the wallet as position adjustment buffer.
For example if your position adjustment assumes it can do 2 additional buys with the same stake amounts then your buffer should be 66.6667% of the initially proposed unlimited stake amount.
Or another example if your position adjustment assumes it can do 1 additional buy with 3x the original stake amount then custom_stake_amount should return 25% of proposed stake amount and leave 75% for possible later position adjustments.
Prices for regular orders can be controlled via the parameter structures entry_pricing for trade entries and exit_pricing for trade exits. Prices are always retrieved right before an order is placed, either by querying the exchange tickers or by using the orderbook data.
Note
Orderbook data used by Freqtrade are the data retrieved from exchange by the ccxt's function fetch_order_book(), i.e. are usually data from the L2-aggregated orderbook, while the ticker data are the structures returned by the ccxt's fetch_ticker()/fetch_tickers() functions. Refer to the ccxt library documentation for more details.
Using market orders
Please read the section Market order pricing section when using market orders.
"},{"location":"configuration/#entry-price","title":"Entry price","text":""},{"location":"configuration/#enter-price-side","title":"Enter price side","text":"The configuration setting entry_pricing.price_side defines the side of the orderbook the bot looks for when buying.
The following displays an orderbook.
...\n103\n102\n101 # ask\n-------------Current spread\n99 # bid\n98\n97\n...\nIf entry_pricing.price_side is set to \"bid\", then the bot will use 99 as entry price. In line with that, if entry_pricing.price_side is set to \"ask\", then the bot will use 101 as entry price.
Depending on the order direction (long/short), this will lead to different results. Therefore we recommend to use \"same\" or \"other\" for this configuration instead. This would result in the following pricing matrix:
Using the other side of the orderbook often guarantees quicker filled orders, but the bot can also end up paying more than what would have been necessary. Taker fees instead of maker fees will most likely apply even when using limit buy orders. Also, prices at the \"other\" side of the spread are higher than prices at the \"bid\" side in the orderbook, so the order behaves similar to a market order (however with a maximum price).
"},{"location":"configuration/#entry-price-with-orderbook-enabled","title":"Entry price with Orderbook enabled","text":"When entering a trade with the orderbook enabled (entry_pricing.use_order_book=True), Freqtrade fetches the entry_pricing.order_book_top entries from the orderbook and uses the entry specified as entry_pricing.order_book_top on the configured side (entry_pricing.price_side) of the orderbook. 1 specifies the topmost entry in the orderbook, while 2 would use the 2nd entry in the orderbook, and so on.
The following section uses side as the configured entry_pricing.price_side (defaults to \"same\").
When not using orderbook (entry_pricing.use_order_book=False), Freqtrade uses the best side price from the ticker if it's below the last traded price from the ticker. Otherwise (when the side price is above the last price), it calculates a rate between side and last price based on entry_pricing.price_last_balance.
The entry_pricing.price_last_balance configuration parameter controls this. A value of 0.0 will use side price, while 1.0 will use the last price and values between those interpolate between ask and last price.
When check depth of market is enabled (entry_pricing.check_depth_of_market.enabled=True), the entry signals are filtered based on the orderbook depth (sum of all amounts) for each orderbook side.
Orderbook bid (buy) side depth is then divided by the orderbook ask (sell) side depth and the resulting delta is compared to the value of the entry_pricing.check_depth_of_market.bids_to_ask_delta parameter. The entry order is only executed if the orderbook delta is greater than or equal to the configured delta value.
Note
A delta value below 1 means that ask (sell) orderbook side depth is greater than the depth of the bid (buy) orderbook side, while a value greater than 1 means opposite (depth of the buy side is higher than the depth of the sell side).
The configuration setting exit_pricing.price_side defines the side of the spread the bot looks for when exiting a trade.
The following displays an orderbook:
...\n103\n102\n101 # ask\n-------------Current spread\n99 # bid\n98\n97\n...\nIf exit_pricing.price_side is set to \"ask\", then the bot will use 101 as exiting price. In line with that, if exit_pricing.price_side is set to \"bid\", then the bot will use 99 as exiting price.
Depending on the order direction (long/short), this will lead to different results. Therefore we recommend to use \"same\" or \"other\" for this configuration instead. This would result in the following pricing matrix:
When exiting with the orderbook enabled (exit_pricing.use_order_book=True), Freqtrade fetches the exit_pricing.order_book_top entries in the orderbook and uses the entry specified as exit_pricing.order_book_top from the configured side (exit_pricing.price_side) as trade exit price.
1 specifies the topmost entry in the orderbook, while 2 would use the 2nd entry in the orderbook, and so on.
"},{"location":"configuration/#exit-price-without-orderbook-enabled","title":"Exit price without Orderbook enabled","text":"The following section uses side as the configured exit_pricing.price_side (defaults to \"ask\").
When not using orderbook (exit_pricing.use_order_book=False), Freqtrade uses the best side price from the ticker if it's above the last traded price from the ticker. Otherwise (when the side price is below the last price), it calculates a rate between side and last price based on exit_pricing.price_last_balance.
The exit_pricing.price_last_balance configuration parameter controls this. A value of 0.0 will use side price, while 1.0 will use the last price and values between those interpolate between side and last price.
When using market orders, prices should be configured to use the \"correct\" side of the orderbook to allow realistic pricing detection. Assuming both entry and exits are using market orders, a configuration similar to the following must be used
\"order_types\": {\n \"entry\": \"market\",\n \"exit\": \"market\"\n // ...\n },\n \"entry_pricing\": {\n \"price_side\": \"other\",\n // ...\n },\n \"exit_pricing\":{\n \"price_side\": \"other\",\n // ...\n },\nObviously, if only one side is using limit orders, different pricing combinations can be used.
"},{"location":"configuration/#further-configuration-details","title":"Further Configuration details","text":""},{"location":"configuration/#understand-minimal_roi","title":"Understand minimal_roi","text":"The minimal_roi configuration parameter is a JSON object where the key is a duration in minutes and the value is the minimum ROI as a ratio. See the example below:
\"minimal_roi\": {\n \"40\": 0.0, # Exit after 40 minutes if the profit is not negative\n \"30\": 0.01, # Exit after 30 minutes if there is at least 1% profit\n \"20\": 0.02, # Exit after 20 minutes if there is at least 2% profit\n \"0\": 0.04 # Exit immediately if there is at least 4% profit\n},\nMost of the strategy files already include the optimal minimal_roi value. This parameter can be set in either Strategy or Configuration file. If you use it in the configuration file, it will override the minimal_roi value from the strategy file. If it is not set in either Strategy or Configuration, a default of 1000% {\"0\": 10} is used, and minimal ROI is disabled unless your trade generates 1000% profit.
Special case to forceexit after a specific time
A special case presents using \"<N>\": -1 as ROI. This forces the bot to exit a trade after N Minutes, no matter if it's positive or negative, so represents a time-limited force-exit.
The force_entry_enable configuration parameter enables the usage of force-enter (/forcelong, /forceshort) commands via Telegram and REST API. For security reasons, it's disabled by default, and freqtrade will show a warning message on startup if enabled. For example, you can send /forceenter ETH/BTC to the bot, which will result in freqtrade buying the pair and holds it until a regular exit-signal (ROI, stoploss, /forceexit) appears.
This can be dangerous with some strategies, so use with care.
See the telegram documentation for details on usage.
"},{"location":"configuration/#ignoring-expired-candles","title":"Ignoring expired candles","text":"When working with larger timeframes (for example 1h or more) and using a low max_open_trades value, the last candle can be processed as soon as a trade slot becomes available. When processing the last candle, this can lead to a situation where it may not be desirable to use the buy signal on that candle. For example, when using a condition in your strategy where you use a cross-over, that point may have passed too long ago for you to start a trade on it.
In these situations, you can enable the functionality to ignore candles that are beyond a specified period by setting ignore_buying_expired_candle_after to a positive number, indicating the number of seconds after which the buy signal becomes expired.
For example, if your strategy is using a 1h timeframe, and you only want to buy within the first 5 minutes when a new candle comes in, you can add the following configuration to your strategy:
{\n //...\n \"ignore_buying_expired_candle_after\": 300,\n // ...\n }\nNote
This setting resets with each new candle, so it will not prevent sticking-signals from executing on the 2nd or 3rd candle they're active. Best use a \"trigger\" selector for buy signals, which are only active for one candle.
"},{"location":"configuration/#understand-order_types","title":"Understand order_types","text":"The order_types configuration parameter maps actions (entry, exit, stoploss, emergency_exit, force_exit, force_entry) to order-types (market, limit, ...) as well as configures stoploss to be on the exchange and defines stoploss on exchange update interval in seconds.
This allows to enter using limit orders, exit using limit-orders, and create stoplosses using market orders. It also allows to set the stoploss \"on exchange\" which means stoploss order would be placed immediately once the buy order is fulfilled.
order_types set in the configuration file overwrites values set in the strategy as a whole, so you need to configure the whole order_types dictionary in one place.
If this is configured, the following 4 values (entry, exit, stoploss and stoploss_on_exchange) need to be present, otherwise, the bot will fail to start.
For information on (emergency_exit,force_exit, force_entry, stoploss_on_exchange,stoploss_on_exchange_interval,stoploss_on_exchange_limit_ratio) please see stop loss documentation stop loss on exchange
Syntax for Strategy:
order_types = {\n \"entry\": \"limit\",\n \"exit\": \"limit\",\n \"emergency_exit\": \"market\",\n \"force_entry\": \"market\",\n \"force_exit\": \"market\",\n \"stoploss\": \"market\",\n \"stoploss_on_exchange\": False,\n \"stoploss_on_exchange_interval\": 60,\n \"stoploss_on_exchange_limit_ratio\": 0.99,\n}\nConfiguration:
\"order_types\": {\n \"entry\": \"limit\",\n \"exit\": \"limit\",\n \"emergency_exit\": \"market\",\n \"force_entry\": \"market\",\n \"force_exit\": \"market\",\n \"stoploss\": \"market\",\n \"stoploss_on_exchange\": false,\n \"stoploss_on_exchange_interval\": 60\n}\nMarket order support
Not all exchanges support \"market\" orders. The following message will be shown if your exchange does not support market orders: \"Exchange <yourexchange> does not support market orders.\" and the bot will refuse to start.
Using market orders
Please carefully read the section Market order pricing section when using market orders.
Stoploss on exchange
order_types.stoploss_on_exchange_interval is not mandatory. Do not change its value if you are unsure of what you are doing. For more information about how stoploss works please refer to the stoploss documentation.
If order_types.stoploss_on_exchange is enabled and the stoploss is cancelled manually on the exchange, then the bot will create a new stoploss order.
Warning: order_types.stoploss_on_exchange failures
If stoploss on exchange creation fails for some reason, then an \"emergency exit\" is initiated. By default, this will exit the trade using a market order. The order-type for the emergency-exit can be changed by setting the emergency_exit value in the order_types dictionary - however, this is not advised.
The order_time_in_force configuration parameter defines the policy by which the order is executed on the exchange. Commonly used time in force are:
GTC (Good Till Canceled):
This is most of the time the default time in force. It means the order will remain on exchange till it is cancelled by the user. It can be fully or partially fulfilled. If partially fulfilled, the remaining will stay on the exchange till cancelled.
FOK (Fill Or Kill):
It means if the order is not executed immediately AND fully then it is cancelled by the exchange.
IOC (Immediate Or Canceled):
It is the same as FOK (above) except it can be partially fulfilled. The remaining part is automatically cancelled by the exchange.
PO (Post only):
Post only order. The order is either placed as a maker order, or it is canceled. This means the order must be placed on orderbook for at least time in an unfilled state.
Please check the Exchange documentation for supported time in force values for your exchange.
"},{"location":"configuration/#time_in_force-config","title":"time_in_force config","text":"The order_time_in_force parameter contains a dict with entry and exit time in force policy values. This can be set in the configuration file or in the strategy. Values set in the configuration file overwrite values from in the strategy, following the regular precedence rules.
The possible values are: GTC (default), FOK or IOC.
\"order_time_in_force\": {\n \"entry\": \"GTC\",\n \"exit\": \"GTC\"\n},\nWarning
Please don't change the default value unless you know what you are doing and have researched the impact of using different values for your particular exchange.
"},{"location":"configuration/#fiat-conversion","title":"Fiat conversion","text":"Freqtrade uses the Coingecko API to convert the coin value to it's corresponding fiat value for the Telegram reports. The FIAT currency can be set in the configuration file as fiat_display_currency.
Removing fiat_display_currency completely from the configuration will skip initializing coingecko, and will not show any FIAT currency conversion. This has no importance for the correct functioning of the bot.
The fiat_display_currency configuration parameter sets the base currency to use for the conversion from coin to fiat in the bot Telegram reports.
The valid values are:
\"AUD\", \"BRL\", \"CAD\", \"CHF\", \"CLP\", \"CNY\", \"CZK\", \"DKK\", \"EUR\", \"GBP\", \"HKD\", \"HUF\", \"IDR\", \"ILS\", \"INR\", \"JPY\", \"KRW\", \"MXN\", \"MYR\", \"NOK\", \"NZD\", \"PHP\", \"PKR\", \"PLN\", \"RUB\", \"SEK\", \"SGD\", \"THB\", \"TRY\", \"TWD\", \"ZAR\", \"USD\"\nIn addition to fiat currencies, a range of crypto currencies is supported.
The valid values are:
\"BTC\", \"ETH\", \"XRP\", \"LTC\", \"BCH\", \"BNB\"\nOn some IP ranges, coingecko is heavily rate-limiting. In such cases, you may want to add your coingecko API key to the configuration.
{\n \"fiat_display_currency\": \"USD\",\n \"coingecko\": {\n \"api_key\": \"your-api\",\n \"is_demo\": true\n }\n}\nFreqtrade supports both Demo and Pro coingecko API keys.
The Coingecko API key is NOT required for the bot to function correctly. It is only used for the conversion of coin to fiat in the Telegram reports, which usually also work without API key.
"},{"location":"configuration/#consuming-exchange-websockets","title":"Consuming exchange Websockets","text":"Freqtrade can consume websockets through ccxt.pro.
Freqtrade aims ensure data is available at all times. Should the websocket connection fail (or be disabled), the bot will fall back to REST API calls.
Should you experience problems you suspect are caused by websockets, you can disable these via the setting exchange.enable_ws, which defaults to true.
\"exchange\": {\n // ...\n \"enable_ws\": false,\n // ...\n}\nShould you be required to use a proxy, please refer to the proxy section for more information.
Rollout
We're implementing this out slowly, ensuring stability of your bots. Currently, usage is limited to ohlcv data streams. It's also limited to a few exchanges, with new exchanges being added on an ongoing basis.
"},{"location":"configuration/#using-dry-run-mode","title":"Using Dry-run mode","text":"We recommend starting the bot in the Dry-run mode to see how your bot will behave and what is the performance of your strategy. In the Dry-run mode, the bot does not engage your money. It only runs a live simulation without creating trades on the exchange.
config.json configuration file.dry-run to true and specify db_url for a persistence database.\"dry_run\": true,\n\"db_url\": \"sqlite:///tradesv3.dryrun.sqlite\",\n\"exchange\": {\n \"name\": \"binance\",\n \"key\": \"key\",\n \"secret\": \"secret\",\n ...\n}\nOnce you will be happy with your bot performance running in the Dry-run mode, you can switch it to production mode.
Note
A simulated wallet is available during dry-run mode and will assume a starting capital of dry_run_wallet (defaults to 1000).
/balance) are simulated based on dry_run_wallet.unfilledtimeout settings.stoploss_on_exchange, the stop_loss price is assumed to be filled.In production mode, the bot will engage your money. Be careful, since a wrong strategy can lose all your money. Be aware of what you are doing when you run it in production mode.
When switching to Production mode, please make sure to use a different / fresh database to avoid dry-run trades messing with your exchange money and eventually tainting your statistics.
"},{"location":"configuration/#setup-your-exchange-account","title":"Setup your exchange account","text":"You will need to create API Keys (usually you get key and secret, some exchanges require an additional password) from the Exchange website and you'll need to insert this into the appropriate fields in the configuration or when asked by the freqtrade new-config command. API Keys are usually only required for live trading (trading for real money, bot running in \"production mode\", executing real orders on the exchange) and are not required for the bot running in dry-run (trade simulation) mode. When you set up the bot in dry-run mode, you may fill these fields with empty values.
Edit your config.json file.
Switch dry-run to false and don't forget to adapt your database URL if set:
\"dry_run\": false,\nInsert your Exchange API key (change them by fake API keys):
{\n \"exchange\": {\n \"name\": \"binance\",\n \"key\": \"af8ddd35195e9dc500b9a6f799f6f5c93d89193b\",\n \"secret\": \"08a9dc6db3d7b53e1acebd9275677f4b0a04f1a5\",\n //\"password\": \"\", // Optional, not needed by all exchanges)\n // ...\n }\n //...\n}\nYou should also make sure to read the Exchanges section of the documentation to be aware of potential configuration details specific to your exchange.
Keep your secrets secret
To keep your secrets secret, we recommend using a 2nd configuration for your API keys. Simply use the above snippet in a new configuration file (e.g. config-private.json) and keep your settings in this file. You can then start the bot with freqtrade trade --config user_data/config.json --config user_data/config-private.json <...> to have your keys loaded.
NEVER share your private configuration file or your exchange keys with anyone!
"},{"location":"configuration/#using-a-proxy-with-freqtrade","title":"Using a proxy with Freqtrade","text":"To use a proxy with freqtrade, export your proxy settings using the variables \"HTTP_PROXY\" and \"HTTPS_PROXY\" set to the appropriate values. This will have the proxy settings applied to everything (telegram, coingecko, ...) except for exchange requests.
export HTTP_PROXY=\"http://addr:port\"\nexport HTTPS_PROXY=\"http://addr:port\"\nfreqtrade\nTo use a proxy for exchange connections - you will have to define the proxies as part of the ccxt configuration.
{ \n \"exchange\": {\n \"ccxt_config\": {\n \"httpsProxy\": \"http://addr:port\",\n \"wsProxy\": \"http://addr:port\",\n }\n }\n}\nFor more information on available proxy types, please consult the ccxt proxy documentation.
"},{"location":"configuration/#next-step","title":"Next step","text":"Now you have configured your config.json, the next step is to start your bot.
"},{"location":"data-analysis/","title":"Analyzing bot data with Jupyter notebooks","text":"You can analyze the results of backtests and trading history easily using Jupyter notebooks. Sample notebooks are located at user_data/notebooks/ after initializing the user directory with freqtrade create-userdir --userdir user_data.
Freqtrade provides a docker-compose file which starts up a jupyter lab server. You can run this server using the following command: docker compose -f docker/docker-compose-jupyter.yml up
This will create a dockercontainer running jupyter lab, which will be accessible using https://127.0.0.1:8888/lab. Please use the link that's printed in the console after startup for simplified login.
For more information, Please visit the Data analysis with Docker section.
"},{"location":"data-analysis/#pro-tips","title":"Pro tips","text":"Sometimes it can be desired to use a system-wide installation of Jupyter notebook, and use a jupyter kernel from the virtual environment. This prevents you from installing the full jupyter suite multiple times per system, and provides an easy way to switch between tasks (freqtrade / other analytics tasks).
For this to work, first activate your virtual environment and run the following commands:
# Activate virtual environment\nsource .venv/bin/activate\n\npip install ipykernel\nipython kernel install --user --name=freqtrade\n# Restart jupyter (lab / notebook)\n# select kernel \"freqtrade\" in the notebook\nNote
This section is provided for completeness, the Freqtrade Team won't provide full support for problems with this setup and will recommend to install Jupyter in the virtual environment directly, as that is the easiest way to get jupyter notebooks up and running. For help with this setup please refer to the Project Jupyter documentation or help channels.
Warning
Some tasks don't work especially well in notebooks. For example, anything using asynchronous execution is a problem for Jupyter. Also, freqtrade's primary entry point is the shell cli, so using pure python in a notebook bypasses arguments that provide required objects and parameters to helper functions. You may need to set those values or create expected objects manually.
"},{"location":"data-analysis/#recommended-workflow","title":"Recommended workflow","text":"Task Tool Bot operations CLI Repetitive tasks Shell scripts Data analysis & visualization NotebookUse the CLI to
* download historical data * run a backtest * run with real-time data * export results
Collect these actions in shell scripts
* save complicated commands with arguments * execute multi-step operations * automate testing strategies and preparing data for analysis
Use a notebook to
* visualize data * mangle and plot to generate insights
Jupyter notebooks execute from the notebook directory. The following snippet searches for the project root, so relative paths remain consistent.
import os\nfrom pathlib import Path\n\n# Change directory\n# Modify this cell to insure that the output shows the correct path.\n# Define all paths relative to the project root shown in the cell output\nproject_root = \"somedir/freqtrade\"\ni=0\ntry:\n os.chdir(project_root)\n assert Path('LICENSE').is_file()\nexcept:\n while i<4 and (not Path('LICENSE').is_file()):\n os.chdir(Path(Path.cwd(), '../'))\n i+=1\n project_root = Path.cwd()\nprint(Path.cwd())\nThis option can be useful to inspect the results of passing in multiple configs. This will also run through the whole Configuration initialization, so the configuration is completely initialized to be passed to other methods.
import json\nfrom freqtrade.configuration import Configuration\n\n# Load config from multiple files\nconfig = Configuration.from_files([\"config1.json\", \"config2.json\"])\n\n# Show the config in memory\nprint(json.dumps(config['original_config'], indent=2))\nFor Interactive environments, have an additional configuration specifying user_data_dir and pass this in last, so you don't have to change directories while running the bot. Best avoid relative paths, since this starts at the storage location of the jupyter notebook, unless the directory is changed.
{\n \"user_data_dir\": \"~/.freqtrade/\"\n}\nuser_data/notebooks/strategy_analysis_example.ipynb)Feel free to submit an issue or Pull Request enhancing this document if you would like to share ideas on how to best analyze the data.
"},{"location":"data-download/","title":"Data Downloading","text":""},{"location":"data-download/#getting-data-for-backtesting-and-hyperopt","title":"Getting data for backtesting and hyperopt","text":"To download data (candles / OHLCV) needed for backtesting and hyperoptimization use the freqtrade download-data command.
If no additional parameter is specified, freqtrade will download data for \"1m\" and \"5m\" timeframes for the last 30 days. Exchange and pairs will come from config.json (if specified using -c/--config). Without provided configuration, --exchange becomes mandatory.
You can use a relative timerange (--days 20) or an absolute starting point (--timerange 20200101-). For incremental downloads, the relative approach should be used.
Tip: Updating existing data
If you already have backtesting data available in your data-directory and would like to refresh this data up to today, freqtrade will automatically calculate the missing timerange for the existing pairs and the download will occur from the latest available point until \"now\", neither --days or --timerange parameters are required. Freqtrade will keep the available data and only download the missing data. If you are updating existing data after inserting new pairs that you have no data for, use the --new-pairs-days xx parameter. Specified number of days will be downloaded for new pairs while old pairs will be updated with missing data only.
usage: freqtrade download-data [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [-p PAIRS [PAIRS ...]] [--pairs-file FILE]\n [--days INT] [--new-pairs-days INT]\n [--include-inactive-pairs]\n [--no-parallel-download]\n [--timerange TIMERANGE] [--dl-trades]\n [--convert] [--exchange EXCHANGE]\n [-t TIMEFRAMES [TIMEFRAMES ...]] [--erase]\n [--data-format-ohlcv {json,jsongz,feather,parquet}]\n [--data-format-trades {json,jsongz,feather,parquet}]\n [--trading-mode {spot,margin,futures}]\n [--prepend]\n\noptions:\n -h, --help show this help message and exit\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --pairs-file FILE File containing a list of pairs. Takes precedence over\n --pairs or pairs configured in the configuration.\n --days INT Download data for given number of days.\n --new-pairs-days INT Download data of new pairs for given number of days.\n Default: `None`.\n --include-inactive-pairs\n Also download data from inactive pairs.\n --no-parallel-download\n Disable parallel startup download. Only use this if\n you experience issues.\n --timerange TIMERANGE\n Specify what timerange of data to use.\n --dl-trades Download trades instead of OHLCV data.\n --convert Convert downloaded trades to OHLCV data. Only\n applicable in combination with `--dl-trades`. Will be\n automatic for exchanges which don't have historic\n OHLCV (e.g. Kraken). If not provided, use `trades-to-\n ohlcv` to convert trades data to OHLCV data.\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\n -t TIMEFRAMES [TIMEFRAMES ...], --timeframes TIMEFRAMES [TIMEFRAMES ...]\n Specify which tickers to download. Space-separated\n list. Default: `1m 5m`.\n --erase Clean all existing data for the selected\n exchange/pairs/timeframes.\n --data-format-ohlcv {json,jsongz,feather,parquet}\n Storage format for downloaded candle (OHLCV) data.\n (default: `feather`).\n --data-format-trades {json,jsongz,feather,parquet}\n Storage format for downloaded trades data. (default:\n `feather`).\n --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}\n Select Trading mode\n --prepend Allow data prepending. (Data-appending is disabled)\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nDownloading all data for one quote currency
Often, you'll want to download data for all pairs of a specific quote-currency. In such cases, you can use the following shorthand: freqtrade download-data --exchange binance --pairs \".*/USDT\" <...>. The provided \"pairs\" string will be expanded to contain all active pairs on the exchange. To also download data for inactive (delisted) pairs, add --include-inactive-pairs to the command.
Startup period
download-data is a strategy-independent command. The idea is to download a big chunk of data once, and then iteratively increase the amount of data stored.
For that reason, download-data does not care about the \"startup-period\" defined in a strategy. It's up to the user to download additional days if the backtest should start at a specific point in time (while respecting startup period).
A very simple command (assuming an available config.json file) can look as follows.
freqtrade download-data --exchange binance\nThis will download historical candle (OHLCV) data for all the currency pairs defined in the configuration.
Alternatively, specify the pairs directly
freqtrade download-data --exchange binance --pairs ETH/USDT XRP/USDT BTC/USDT\nor as regex (in this case, to download all active USDT pairs)
freqtrade download-data --exchange binance --pairs \".*/USDT\"\n--datadir user_data/data/some_directory.--exchange <exchange> - or specify a different configuration file.pairs.json from some other directory, use --pairs-file some_other_dir/pairs.json.--days 10 (defaults to 30 days).--timerange 20200101- - which will download all data from January 1st, 2020.--timeframes to specify what timeframe download the historical candle (OHLCV) data for. Default is --timeframes 1m 5m which will download 1-minute and 5-minute data.-c/--config option. With this, the script uses the whitelist defined in the config as the list of currency pairs to download data for and does not require the pairs.json file. You can combine -c/--config with most other options.If your configuration directory user_data was made by docker, you may get the following error:
cp: cannot create regular file 'user_data/data/binance/pairs.json': Permission denied\nYou can fix the permissions of your user-data directory as follows:
sudo chown -R $UID:$GID user_data\nAssuming you downloaded all data from 2022 (--timerange 20220101-) - but you'd now like to also backtest with earlier data. You can do so by using the --prepend flag, combined with --timerange - specifying an end-date.
freqtrade download-data --exchange binance --pairs ETH/USDT XRP/USDT BTC/USDT --prepend --timerange 20210101-20220101\nNote
Freqtrade will ignore the end-date in this mode if data is available, updating the end-date to the existing data start point.
"},{"location":"data-download/#data-format","title":"Data format","text":"Freqtrade currently supports the following data-formats:
feather - a dataformat based on Apache Arrowjson - plain \"text\" json filesjsongz - a gzip-zipped version of json filesparquet - columnar datastore (OHLCV only)By default, both OHLCV data and trades data are stored in the feather format.
This can be changed via the --data-format-ohlcv and --data-format-trades command line arguments respectively. To persist this change, you should also add the following snippet to your configuration, so you don't have to insert the above arguments each time:
// ...\n \"dataformat_ohlcv\": \"feather\",\n \"dataformat_trades\": \"feather\",\n // ...\nIf the default data-format has been changed during download, then the keys dataformat_ohlcv and dataformat_trades in the configuration file need to be adjusted to the selected dataformat as well.
Note
You can convert between data-formats using the convert-data and convert-trade-data methods.
"},{"location":"data-download/#dataformat-comparison","title":"Dataformat comparison","text":"The following comparisons have been made with the following data, and by using the linux time command.
Found 6 pair / timeframe combinations.\n+----------+-------------+--------+---------------------+---------------------+\n| Pair | Timeframe | Type | From | To |\n|----------+-------------+--------+---------------------+---------------------|\n| BTC/USDT | 5m | spot | 2017-08-17 04:00:00 | 2022-09-13 19:25:00 |\n| ETH/USDT | 1m | spot | 2017-08-17 04:00:00 | 2022-09-13 19:26:00 |\n| BTC/USDT | 1m | spot | 2017-08-17 04:00:00 | 2022-09-13 19:30:00 |\n| XRP/USDT | 5m | spot | 2018-05-04 08:10:00 | 2022-09-13 19:15:00 |\n| XRP/USDT | 1m | spot | 2018-05-04 08:11:00 | 2022-09-13 19:22:00 |\n| ETH/USDT | 5m | spot | 2017-08-17 04:00:00 | 2022-09-13 19:20:00 |\n+----------+-------------+--------+---------------------+---------------------+\nTimings have been taken in a not very scientific way with the following command, which forces reading the data into memory.
time freqtrade list-data --show-timerange --data-format-ohlcv <dataformat>\nfeather 72Mb 3.5s json 149Mb 25.6s jsongz 39Mb 27s parquet 83Mb 3.8s Size has been taken from the BTC/USDT 1m spot combination for the timerange specified above.
To have a best performance/size mix, we recommend using the default feather format, or parquet.
"},{"location":"data-download/#pairs-file","title":"Pairs file","text":"In alternative to the whitelist from config.json, a pairs.json file can be used. If you are using Binance for example:
user_data/data/binance and copy or create the pairs.json file in that directory.pairs.json file to contain the currency pairs you are interested in.mkdir -p user_data/data/binance\ntouch user_data/data/binance/pairs.json\nThe format of the pairs.json file is a simple json list. Mixing different stake-currencies is allowed for this file, since it's only used for downloading.
[\n \"ETH/BTC\",\n \"ETH/USDT\",\n \"BTC/USDT\",\n \"XRP/ETH\"\n]\nNote
The pairs.json file is only used when no configuration is loaded (implicitly by naming, or via --config flag). You can force the usage of this file via --pairs-file pairs.json - however we recommend to use the pairlist from within the configuration, either via exchange.pair_whitelist or pairs setting in the configuration.
usage: freqtrade convert-data [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [-p PAIRS [PAIRS ...]] --format-from\n {json,jsongz,feather,parquet} --format-to\n {json,jsongz,feather,parquet} [--erase]\n [--exchange EXCHANGE]\n [-t TIMEFRAMES [TIMEFRAMES ...]]\n [--trading-mode {spot,margin,futures}]\n [--candle-types {spot,futures,mark,index,premiumIndex,funding_rate} [{spot,futures,mark,index,premiumIndex,funding_rate} ...]]\n\noptions:\n -h, --help show this help message and exit\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --format-from {json,jsongz,feather,parquet}\n Source format for data conversion.\n --format-to {json,jsongz,feather,parquet}\n Destination format for data conversion.\n --erase Clean all existing data for the selected\n exchange/pairs/timeframes.\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\n -t TIMEFRAMES [TIMEFRAMES ...], --timeframes TIMEFRAMES [TIMEFRAMES ...]\n Specify which tickers to download. Space-separated\n list. Default: `1m 5m`.\n --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}\n Select Trading mode\n --candle-types {spot,futures,mark,index,premiumIndex,funding_rate} [{spot,futures,mark,index,premiumIndex,funding_rate} ...]\n Select candle type to convert. Defaults to all\n available types.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nThe following command will convert all candle (OHLCV) data available in ~/.freqtrade/data/binance from json to jsongz, saving diskspace in the process. It'll also remove original json data files (--erase parameter).
freqtrade convert-data --format-from json --format-to jsongz --datadir ~/.freqtrade/data/binance -t 5m 15m --erase\nusage: freqtrade convert-trade-data [-h] [-v] [--no-color] [--logfile FILE]\n [-V] [-c PATH] [-d PATH] [--userdir PATH]\n [-p PAIRS [PAIRS ...]] --format-from\n {json,jsongz,feather,parquet,kraken_csv}\n --format-to {json,jsongz,feather,parquet}\n [--erase] [--exchange EXCHANGE]\n\noptions:\n -h, --help show this help message and exit\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --format-from {json,jsongz,feather,parquet,kraken_csv}\n Source format for data conversion.\n --format-to {json,jsongz,feather,parquet}\n Destination format for data conversion.\n --erase Clean all existing data for the selected\n exchange/pairs/timeframes.\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nThe following command will convert all available trade-data in ~/.freqtrade/data/kraken from jsongz to json. It'll also remove original jsongz data files (--erase parameter).
freqtrade convert-trade-data --format-from jsongz --format-to json --datadir ~/.freqtrade/data/kraken --erase\nWhen you need to use --dl-trades (kraken only) to download data, conversion of trades data to ohlcv data is the last step. This command will allow you to repeat this last step for additional timeframes without re-downloading the data.
usage: freqtrade trades-to-ohlcv [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [-p PAIRS [PAIRS ...]]\n [-t TIMEFRAMES [TIMEFRAMES ...]]\n [--exchange EXCHANGE]\n [--data-format-ohlcv {json,jsongz,feather,parquet}]\n [--data-format-trades {json,jsongz,feather,parquet}]\n [--trading-mode {spot,margin,futures}]\n\noptions:\n -h, --help show this help message and exit\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n -t TIMEFRAMES [TIMEFRAMES ...], --timeframes TIMEFRAMES [TIMEFRAMES ...]\n Specify which tickers to download. Space-separated\n list. Default: `1m 5m`.\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\n --data-format-ohlcv {json,jsongz,feather,parquet}\n Storage format for downloaded candle (OHLCV) data.\n (default: `feather`).\n --data-format-trades {json,jsongz,feather,parquet}\n Storage format for downloaded trades data. (default:\n `feather`).\n --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}\n Select Trading mode\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nfreqtrade trades-to-ohlcv --exchange kraken -t 5m 1h 1d --pairs BTC/EUR ETH/EUR\nYou can get a list of downloaded data using the list-data sub-command.
usage: freqtrade list-data [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [--exchange EXCHANGE]\n [--data-format-ohlcv {json,jsongz,feather,parquet}]\n [--data-format-trades {json,jsongz,feather,parquet}]\n [--trades] [-p PAIRS [PAIRS ...]]\n [--trading-mode {spot,margin,futures}]\n [--show-timerange]\n\noptions:\n -h, --help show this help message and exit\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\n --data-format-ohlcv {json,jsongz,feather,parquet}\n Storage format for downloaded candle (OHLCV) data.\n (default: `feather`).\n --data-format-trades {json,jsongz,feather,parquet}\n Storage format for downloaded trades data. (default:\n `feather`).\n --trades Work on trades data instead of OHLCV data.\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}\n Select Trading mode\n --show-timerange Show timerange available for available data. (May take\n a while to calculate).\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n> freqtrade list-data --userdir ~/.freqtrade/user_data/\n\n Found 33 pair / timeframe combinations.\n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Pair \u2503 Timeframe \u2503 Type \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 ADA/BTC \u2502 5m, 15m, 30m, 1h, 2h, 4h, 6h, 12h, 1d \u2502 spot \u2502\n\u2502 ADA/ETH \u2502 5m, 15m, 30m, 1h, 2h, 4h, 6h, 12h, 1d \u2502 spot \u2502\n\u2502 ETH/BTC \u2502 5m, 15m, 30m, 1h, 2h, 4h, 6h, 12h, 1d \u2502 spot \u2502\n\u2502 ETH/USDT \u2502 5m, 15m, 30m, 1h, 2h, 4h \u2502 spot \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2518\nShow all trades data including from/to timerange
> freqtrade list-data --show --trades\n Found trades data for 1 pair. \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Pair \u2503 Type \u2503 From \u2503 To \u2503 Trades \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 XRP/ETH \u2502 spot \u2502 2019-10-11 00:00:11 \u2502 2019-10-13 11:19:28 \u2502 12477 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\nBy default, download-data sub-command downloads Candles (OHLCV) data. Most exchanges also provide historic trade-data via their API. This data can be useful if you need many different timeframes, since it is only downloaded once, and then resampled locally to the desired timeframes.
Since this data is large by default, the files use the feather file format by default. They are stored in your data-directory with the naming convention of <pair>-trades.feather (ETH_BTC-trades.feather). Incremental mode is also supported, as for historic OHLCV data, so downloading the data once per week with --days 8 will create an incremental data-repository.
To use this mode, simply add --dl-trades to your call. This will swap the download method to download trades. If --convert is also provided, the resample step will happen automatically and overwrite eventually existing OHLCV data for the given pair/timeframe combinations.
Do not use
You should not use this unless you're a kraken user (Kraken does not provide historic OHLCV data). Most other exchanges provide OHLCV data with sufficient history, so downloading multiple timeframes through that method will still proof to be a lot faster than downloading trades data.
Kraken user
Kraken users should read this before starting to download data.
Example call:
freqtrade download-data --exchange kraken --pairs XRP/EUR ETH/EUR --days 20 --dl-trades\nNote
While this method uses async calls, it will be slow, since it requires the result of the previous call to generate the next request to the exchange.
"},{"location":"data-download/#next-step","title":"Next step","text":"Great, you now have some data downloaded, so you can now start backtesting your strategy.
"},{"location":"deprecated/","title":"Deprecated features","text":"This page contains description of the command line arguments, configuration parameters and the bot features that were declared as DEPRECATED by the bot development team and are no longer supported. Please avoid their usage in your configuration.
"},{"location":"deprecated/#removed-features","title":"Removed features","text":""},{"location":"deprecated/#the-refresh-pairs-cached-command-line-option","title":"the--refresh-pairs-cached command line option","text":"--refresh-pairs-cached in the context of backtesting, hyperopt and edge allows to refresh candle data for backtesting. Since this leads to much confusion, and slows down backtesting (while not being part of backtesting) this has been singled out as a separate freqtrade sub-command freqtrade download-data.
This command line option was deprecated in 2019.7-dev (develop branch) and removed in 2019.9.
"},{"location":"deprecated/#the-dynamic-whitelist-command-line-option","title":"The --dynamic-whitelist command line option","text":"This command line option was deprecated in 2018 and removed freqtrade 2019.6-dev (develop branch) and in freqtrade 2019.7. Please refer to pairlists instead.
"},{"location":"deprecated/#the-live-command-line-option","title":"the--live command line option","text":"--live in the context of backtesting allowed to download the latest tick data for backtesting. Did only download the latest 500 candles, so was ineffective in getting good backtest data. Removed in 2019-7-dev (develop branch) and in freqtrade 2019.8.
ticker_interval (now timeframe)","text":"Support for ticker_interval terminology was deprecated in 2020.6 in favor of timeframe - and compatibility code was removed in 2022.3.
The former \"pairlist\" section in the configuration has been removed, and is replaced by \"pairlists\" - being a list to specify a sequence of pairlists.
The old section of configuration parameters (\"pairlist\") has been deprecated in 2019.11 and has been removed in 2020.4.
Since only quoteVolume can be compared between assets, the other options (bidVolume, askVolume) have been deprecated in 2020.4, and have been removed in 2020.9.
"},{"location":"deprecated/#using-order-book-steps-for-exit-price","title":"Using order book steps for exit price","text":"Using order_book_min and order_book_max used to allow stepping the orderbook and trying to find the next ROI slot - trying to place sell-orders early. As this does however increase risk and provides no benefit, it's been removed for maintainability purposes in 2021.7.
Using separate hyperopt files was deprecated in 2021.4 and was removed in 2021.9. Please switch to the new Parametrized Strategies to benefit from the new hyperopt interface.
"},{"location":"deprecated/#strategy-changes-between-v2-and-v3","title":"Strategy changes between V2 and V3","text":"Isolated Futures / short trading was introduced in 2022.4. This required major changes to configuration settings, strategy interfaces, ...
We have put a great effort into keeping compatibility with existing strategies, so if you just want to continue using freqtrade in spot markets, there are no changes necessary. While we may drop support for the current interface sometime in the future, we will announce this separately and have an appropriate transition period.
Please follow the Strategy migration guide to migrate your strategy to the new format to start using the new functionalities.
"},{"location":"deprecated/#webhooks-changes-with-20224","title":"webhooks - changes with 2022.4","text":""},{"location":"deprecated/#buy_tag-has-been-renamed-to-enter_tag","title":"buy_tag has been renamed to enter_tag","text":"This should apply only to your strategy and potentially to webhooks. We will keep a compatibility layer for 1-2 versions (so both buy_tag and enter_tag will still work), but support for this in webhooks will disappear after that.
Webhook terminology changed from \"sell\" to \"exit\", and from \"buy\" to \"entry\", removing \"webhook\" in the process.
webhookbuy, webhookentry -> entrywebhookbuyfill, webhookentryfill -> entry_fillwebhookbuycancel, webhookentrycancel -> entry_cancelwebhooksell, webhookexit -> exitwebhooksellfill, webhookexitfill -> exit_fillwebhooksellcancel, webhookexitcancel -> exit_cancelpopulate_any_indicators","text":"version 2023.3 saw the removal of populate_any_indicators in favor of split methods for feature engineering and targets. Please read the migration document for full details.
protections from configuration","text":"Setting protections from the configuration via \"protections\": [], has been removed in 2024.10, after having raised deprecation warnings for over 3 years.
Using hdf5 as data storage has been deprecated in 2024.12 and was removed in 2025.1. We recommend switching to the feather data format.
Please use the convert-data subcommand to convert your existing data to one of the supported formats before updating.
Configuring syslog and journald via --logfile systemd and --logfile journald respectively has been deprecated in 2025.3. Please use configuration based log setup instead.
The edge module has been deprecated in 2023.9 and removed in 2025.6. All functionalities of edge have been removed, and having edge configured will result in an error.
"},{"location":"developer/","title":"Development Help","text":"This page is intended for developers of Freqtrade, people who want to contribute to the Freqtrade codebase or documentation, or people who want to understand the source code of the application they're running.
All contributions, bug reports, bug fixes, documentation improvements, enhancements and ideas are welcome. We track issues on GitHub and also have a dev channel on discord where you can ask questions.
"},{"location":"developer/#documentation","title":"Documentation","text":"Documentation is available at https://freqtrade.io and needs to be provided with every new feature PR.
Special fields for the documentation (like Note boxes, ...) can be found here.
To test the documentation locally use the following commands.
pip install -r docs/requirements-docs.txt\nmkdocs serve\nThis will spin up a local server (usually on port 8000) so you can see if everything looks as you'd like it to.
"},{"location":"developer/#developer-setup","title":"Developer setup","text":"To configure a development environment, you can either use the provided DevContainer, or use the setup.sh script and answer \"y\" when asked \"Do you want to install dependencies for dev [y/N]? \". Alternatively (e.g. if your system is not supported by the setup.sh script), follow the manual installation process and run pip3 install -r requirements-dev.txt - followed by pip3 install -e .[all].
This will install all required tools for development, including pytest, ruff, mypy, and coveralls.
Then install the git hook scripts by running pre-commit install, so your changes will be verified locally before committing. This avoids a lot of waiting for CI already, as some basic formatting checks are done locally on your machine.
Before opening a pull request, please familiarize yourself with our Contributing Guidelines.
"},{"location":"developer/#devcontainer-setup","title":"Devcontainer setup","text":"The fastest and easiest way to get started is to use VSCode with the Remote container extension. This gives developers the ability to start the bot with all required dependencies without needing to install any freqtrade specific dependencies on your local machine.
"},{"location":"developer/#devcontainer-dependencies","title":"Devcontainer dependencies","text":"For more information about the Remote container extension, best consult the documentation.
"},{"location":"developer/#tests","title":"Tests","text":"New code should be covered by basic unittests. Depending on the complexity of the feature, Reviewers may request more in-depth unittests. If necessary, the Freqtrade team can assist and give guidance with writing good tests (however please don't expect anyone to write the tests for you).
"},{"location":"developer/#how-to-run-tests","title":"How to run tests","text":"Use pytest in root folder to run all available testcases and confirm your local environment is setup correctly
feature branches
Tests are expected to pass on the develop and stable branches. Other branches may be work in progress with tests not working yet.
Freqtrade uses 2 main methods to check log content in tests, log_has() and log_has_re() (to check using regex, in case of dynamic log-messages). These are available from conftest.py and can be imported in any test module.
A sample check looks as follows:
from tests.conftest import log_has, log_has_re\n\ndef test_method_to_test(caplog):\n method_to_test()\n\n assert log_has(\"This event happened\", caplog)\n # Check regex with trailing number ...\n assert log_has_re(r\"This dynamic event happened and produced \\d+\", caplog)\nTo debug freqtrade, we recommend VSCode (with the Python extension) with the following launch configuration (located in .vscode/launch.json). Details will obviously vary between setups - but this should work to get you started.
{\n \"name\": \"freqtrade trade\",\n \"type\": \"debugpy\",\n \"request\": \"launch\",\n \"module\": \"freqtrade\",\n \"console\": \"integratedTerminal\",\n \"args\": [\n \"trade\",\n // Optional:\n // \"--userdir\", \"user_data\",\n \"--strategy\", \n \"MyAwesomeStrategy\",\n ]\n},\nCommand line arguments can be added in the \"args\" array. This method can also be used to debug a strategy, by setting the breakpoints within the strategy.
A similar setup can also be taken for Pycharm - using freqtrade as module name, and setting the command line arguments as \"parameters\".
When using a virtual environment (which you should), make sure that your Editor is using the correct virtual environment to avoid problems or \"unknown import\" errors.
Startup directory
This assumes that you have the repository checked out, and the editor is started at the repository root level (so pyproject.toml is at the top level of your repository).
"},{"location":"developer/#vscode","title":"Vscode","text":"You can select the correct environment in VSCode with the command \"Python: Select Interpreter\" - which will show you environments the extension detected. If your environment has not been detected, you can also pick a path manually.
"},{"location":"developer/#pycharm","title":"Pycharm","text":"In pycharm, you can select the appropriate Environment in the \"Run/Debug Configurations\" window.
"},{"location":"developer/#errorhandling","title":"ErrorHandling","text":"Freqtrade Exceptions all inherit from FreqtradeException. This general class of error should however not be used directly. Instead, multiple specialized sub-Exceptions exist.
Below is an outline of exception inheritance hierarchy:
+ FreqtradeException\n|\n+---+ OperationalException\n| |\n| +---+ ConfigurationError\n|\n+---+ DependencyException\n| |\n| +---+ PricingError\n| |\n| +---+ ExchangeError\n| |\n| +---+ TemporaryError\n| |\n| +---+ DDosProtection\n| |\n| +---+ InvalidOrderException\n| |\n| +---+ RetryableOrderError\n| |\n| +---+ InsufficientFundsError\n|\n+---+ StrategyError\nYou have a great idea for a new pair selection algorithm you would like to try out? Great. Hopefully you also want to contribute this back upstream.
Whatever your motivations are - This should get you off the ground in trying to develop a new Pairlist Handler.
First of all, have a look at the VolumePairList Handler, and best copy this file with a name of your new Pairlist Handler.
This is a simple Handler, which however serves as a good example on how to start developing.
Next, modify the class-name of the Handler (ideally align this with the module filename).
The base-class provides an instance of the exchange (self._exchange) the pairlist manager (self._pairlistmanager), as well as the main configuration (self._config), the pairlist dedicated configuration (self._pairlistconfig) and the absolute position within the list of pairlists.
self._exchange = exchange\n self._pairlistmanager = pairlistmanager\n self._config = config\n self._pairlistconfig = pairlistconfig\n self._pairlist_pos = pairlist_pos\nTip
Don't forget to register your pairlist in constants.py under the variable AVAILABLE_PAIRLISTS - otherwise it will not be selectable.
Now, let's step through the methods which require actions:
"},{"location":"developer/#pairlist-configuration","title":"Pairlist configuration","text":"Configuration for the chain of Pairlist Handlers is done in the bot configuration file in the element \"pairlists\", an array of configuration parameters for each Pairlist Handlers in the chain.
By convention, \"number_assets\" is used to specify the maximum number of pairs to keep in the pairlist. Please follow this to ensure a consistent user experience.
Additional parameters can be configured as needed. For instance, VolumePairList uses \"sort_key\" to specify the sorting value - however feel free to specify whatever is necessary for your great algorithm to be successful and dynamic.
Returns a description used for Telegram messages.
This should contain the name of the Pairlist Handler, as well as a short description containing the number of assets. Please follow the format \"PairlistName - top/bottom X pairs\".
Override this method if the Pairlist Handler can be used as the leading Pairlist Handler in the chain, defining the initial pairlist which is then handled by all Pairlist Handlers in the chain. Examples are StaticPairList and VolumePairList.
This is called with each iteration of the bot (only if the Pairlist Handler is at the first location) - so consider implementing caching for compute/network heavy calculations.
It must return the resulting pairlist (which may then be passed into the chain of Pairlist Handlers).
Validations are optional, the parent class exposes a verify_blacklist(pairlist) and _whitelist_for_active_markets(pairlist) to do default filtering. Use this if you limit your result to a certain number of pairs - so the end-result is not shorter than expected.
This method is called for each Pairlist Handler in the chain by the pairlist manager.
This is called with each iteration of the bot - so consider implementing caching for compute/network heavy calculations.
It gets passed a pairlist (which can be the result of previous pairlists) as well as tickers, a pre-fetched version of get_tickers().
The default implementation in the base class simply calls the _validate_pair() method for each pair in the pairlist, but you may override it. So you should either implement the _validate_pair() in your Pairlist Handler or override filter_pairlist() to do something else.
If overridden, it must return the resulting pairlist (which may then be passed into the next Pairlist Handler in the chain).
Validations are optional, the parent class exposes a verify_blacklist(pairlist) and _whitelist_for_active_markets(pairlist) to do default filters. Use this if you limit your result to a certain number of pairs - so the end result is not shorter than expected.
In VolumePairList, this implements different methods of sorting, does early validation so only the expected number of pairs is returned.
def filter_pairlist(self, pairlist: list[str], tickers: dict) -> List[str]:\n # Generate dynamic whitelist\n pairs = self._calculate_pairlist(pairlist, tickers)\n return pairs\nBest read the Protection documentation to understand protections. This Guide is directed towards Developers who want to develop a new protection.
No protection should use datetime directly, but use the provided date_now variable for date calculations. This preserves the ability to backtest protections.
Writing a new Protection
Best copy one of the existing Protections to have a good example.
"},{"location":"developer/#implementation-of-a-new-protection","title":"Implementation of a new protection","text":"All Protection implementations must have IProtection as parent class. For that reason, they must implement the following methods:
short_desc()global_stop()stop_per_pair().global_stop() and stop_per_pair() must return a ProtectionReturn object, which consists of:
The until portion should be calculated using the provided calculate_lock_end() method.
All Protections should use \"stop_duration\" / \"stop_duration_candles\" to define how long a pair (or all pairs) should be locked. The content of this is made available as self._stop_duration to the each Protection.
If your protection requires a look-back period, please use \"lookback_period\" / \"lockback_period_candles\" to keep all protections aligned.
Protections can have 2 different ways to stop trading for a limited :
Protections that implement the per pair approach must set has_local_stop=True. The method stop_per_pair() will be called whenever a trade closed (exit order completed).
These Protections should do their evaluation across all pairs, and consequently will also lock all pairs from trading (called a global PairLock). Global protection must set has_global_stop=True to be evaluated for global stops. The method global_stop() will be called whenever a trade closed (exit order completed).
Protections should calculate the lock end time based on the last trade it considers. This avoids re-locking should the lookback-period be longer than the actual lock period.
The IProtection parent class provides a helper method for this in calculate_lock_end().
Note
This section is a Work in Progress and is not a complete guide on how to test a new exchange with Freqtrade.
Note
Make sure to use an up-to-date version of CCXT before running any of the below tests. You can get the latest version of ccxt by running pip install -U ccxt with activated virtual environment. Native docker is not supported for these tests, however the available dev-container will support all required actions and eventually necessary changes.
Most exchanges supported by CCXT should work out of the box.
If you need to implement a specific exchange class, these are found in the freqtrade/exchange source folder. You'll also need to add the import to freqtrade/exchange/__init__.py to make the loading logic aware of the new exchange. We recommend looking at existing exchange implementations to get an idea of what might be required.
Warning
Implementing and testing an exchange can be a lot of trial and error, so please bear this in mind. You should also have some development experience, as this is not a beginner task.
To quickly test the public endpoints of an exchange, add a configuration for your exchange to tests/exchange_online/conftest.py and run these tests with pytest --longrun tests/exchange_online/test_ccxt_compat.py. Completing these tests successfully a good basis point (it's a requirement, actually), however these won't guarantee correct exchange functioning, as this only tests public endpoints, but no private endpoint (like generate order or similar).
Also try to use freqtrade download-data for an extended timerange (multiple months) and verify that the data downloaded correctly (no holes, the specified timerange was actually downloaded).
These are prerequisites to have an exchange listed as either Supported or Community tested (listed on the homepage). The below are \"extras\", which will make an exchange better (feature-complete) - but are not absolutely necessary for either of the 2 categories.
Additional tests / steps to complete:
fetch_ohlcv() - and eventually adjust ohlcv_candle_limit for this exchange(*) Requires API keys and Balance on the exchange.
"},{"location":"developer/#stoploss-on-exchange","title":"Stoploss On Exchange","text":"Check if the new exchange supports Stoploss on Exchange orders through their API.
Since CCXT does not provide unification for Stoploss On Exchange yet, we'll need to implement the exchange-specific parameters ourselves. Best look at binance.py for an example implementation of this. You'll need to dig through the documentation of the Exchange's API on how exactly this can be done. CCXT Issues may also provide great help, since others may have implemented something similar for their projects.
While fetching candle (OHLCV) data, we may end up getting incomplete candles (depending on the exchange). To demonstrate this, we'll use daily candles (\"1d\") to keep things simple. We query the api (ct.fetch_ohlcv()) for the timeframe and look at the date of the last entry. If this entry changes or shows the date of a \"incomplete\" candle, then we should drop this since having incomplete candles is problematic because indicators assume that only complete candles are passed to them, and will generate a lot of false buy signals. By default, we're therefore removing the last candle assuming it's incomplete.
To check how the new exchange behaves, you can use the following snippet:
import ccxt\nfrom datetime import datetime, timezone\nfrom freqtrade.data.converter import ohlcv_to_dataframe\nct = ccxt.binance() # Use the exchange you're testing\ntimeframe = \"1d\"\npair = \"BTC/USDT\" # Make sure to use a pair that exists on that exchange!\nraw = ct.fetch_ohlcv(pair, timeframe=timeframe)\n\n# convert to dataframe\ndf1 = ohlcv_to_dataframe(raw, timeframe, pair=pair, drop_incomplete=False)\n\nprint(df1.tail(1))\nprint(datetime.now(timezone.utc))\n date open high low close volume \n499 2019-06-08 00:00:00+00:00 0.000007 0.000007 0.000007 0.000007 26264344.0 \n2019-06-09 12:30:27.873327\nThe output will show the last entry from the Exchange as well as the current UTC date. If the day shows the same day, then the last candle can be assumed as incomplete and should be dropped (leave the setting \"ohlcv_partial_candle\" from the exchange-class untouched / True). Otherwise, set \"ohlcv_partial_candle\" to False to not drop Candles (shown in the example above). Another way is to run this command multiple times in a row and observe if the volume is changing (while the date remains the same).
Updating leveraged tiers should be done regularly - and requires an authenticated account with futures enabled.
import ccxt\nimport json\nfrom pathlib import Path\n\nexchange = ccxt.binance({\n 'apiKey': '<apikey>',\n 'secret': '<secret>',\n 'options': {'defaultType': 'swap'}\n })\n_ = exchange.load_markets()\n\nlev_tiers = exchange.fetch_leverage_tiers()\n\n# Assumes this is running in the root of the repository.\nfile = Path('freqtrade/exchange/binance_leverage_tiers.json')\njson.dump(dict(sorted(lev_tiers.items())), file.open('w'), indent=2)\nThis file should then be contributed upstream, so others can benefit from this, too.
"},{"location":"developer/#updating-example-notebooks","title":"Updating example notebooks","text":"To keep the jupyter notebooks aligned with the documentation, the following should be ran after updating a example notebook.
jupyter nbconvert --ClearOutputPreprocessor.enabled=True --inplace freqtrade/templates/strategy_analysis_example.ipynb\njupyter nbconvert --ClearOutputPreprocessor.enabled=True --to markdown freqtrade/templates/strategy_analysis_example.ipynb --stdout > docs/strategy_analysis_example.md\nTo generate backtest outputs, please use the following commands:
# Assume a dedicated user directory for this output\nfreqtrade create-userdir --userdir user_data_bttest/\n# set can_short = True\nsed -i \"s/can_short: bool = False/can_short: bool = True/\" user_data_bttest/strategies/sample_strategy.py\n\nfreqtrade download-data --timerange 20250625-20250801 --config tests/testdata/config.tests.usdt.json --userdir user_data_bttest/ -t 5m\n\nfreqtrade backtesting --config tests/testdata/config.tests.usdt.json -s SampleStrategy --userdir user_data_bttest/ --cache none --timerange 20250701-20250801\nThis documents some decisions taken for the CI Pipeline.
stable and develop, and are built as multiarch builds, supporting multiple platforms via the same tag.stable_plot and develop_plot./freqtrade/freqtrade_commit containing the commit this image is based of.stable or develop.This part of the documentation is aimed at maintainers, and shows how to create a release.
"},{"location":"developer/#create-release-branch","title":"Create release branch","text":"Note
Make sure that the stable branch is up-to-date!
First, pick a commit that's about one week old (to not include latest additions to releases).
# create new branch\ngit checkout -b new_release <commitid>\nDetermine if crucial bugfixes have been made between this commit and the current state, and eventually cherry-pick these.
freqtrade/__init__.py and add the version matching the current date (for example 2019.7 for July 2019). Minor versions can be 2019.7.1 should we need to do a second release that month. Version numbers must follow allowed versions from PEP0440 to avoid failures pushing to pypi.2019.8-dev.# Needs to be done before merging / pulling that branch.\ngit log --oneline --no-decorate --no-merges stable..new_release\nTo keep the release-log short, best wrap the full git changelog into a collapsible details section.
<details>\n<summary>Expand full changelog</summary>\n\n... Full git changelog\n\n</details>\nIf FreqUI has been updated substantially, make sure to create a release before merging the release branch. Make sure that freqUI CI on the release is finished and passed before merging the release.
"},{"location":"developer/#create-github-release-tag","title":"Create github release / tag","text":"Once the PR against stable is merged (best right after merging):
## Highlighted changes\n\n- ...\n\n### How to update\n\nAs always, you can update your bot using one of the following commands:\n\n#### docker-compose\n\n```bash\ndocker-compose pull\ndocker-compose up -d\n```\n\n#### Installation via setup script\n\n```\n# Deactivate venv and run \n./setup.sh --update\n```\n\n#### Plain native installation\n\n```\ngit pull\npip install -U -r requirements.txt\n```\n\n<details>\n<summary>Expand full changelog</summary>\n\n```\n<Paste your changelog here>\n```\n\n</details>\nManual Releases
This process is automated as part of Github Actions. Manual pypi pushes should not be necessary.
Manual releaseTo manually create a pypi release, please run the following commands:
Additional requirement: wheel, twine (for uploading), account on pypi with proper permissions.
pip install -U build\npython -m build --sdist --wheel\n\n# For pypi test (to check if some change to the installation did work)\ntwine upload --repository-url https://test.pypi.org/legacy/ dist/*\n\n# For production:\ntwine upload dist/*\nPlease don't push non-releases to the productive / real pypi instance.
"},{"location":"docker_quickstart/","title":"Using Freqtrade with Docker","text":"This page explains how to run the bot with Docker. It is not meant to work out of the box. You'll still need to read through the documentation and understand how to properly configure it.
"},{"location":"docker_quickstart/#install-docker","title":"Install Docker","text":"Start by downloading and installing Docker / Docker Desktop for your platform:
Docker compose install
Freqtrade documentation assumes the use of Docker desktop (or the docker compose plugin). While the docker-compose standalone installation still works, it will require changing all docker compose commands from docker compose to docker-compose to work (e.g. docker compose up -d will become docker-compose up -d).
If you just installed docker on a windows system, make sure to reboot your system, otherwise you might encounter unexplainable Problems related to network connectivity to docker containers.
"},{"location":"docker_quickstart/#freqtrade-with-docker","title":"Freqtrade with docker","text":"Freqtrade provides an official Docker image on Dockerhub, as well as a docker compose file ready for usage.
Note
docker is installed and available to the logged in user.docker-compose.yml file.Create a new directory and place the docker-compose file in this directory.
mkdir ft_userdata\ncd ft_userdata/\n# Download the docker-compose file from the repository\ncurl https://raw.githubusercontent.com/freqtrade/freqtrade/stable/docker-compose.yml -o docker-compose.yml\n\n# Pull the freqtrade image\ndocker compose pull\n\n# Create user directory structure\ndocker compose run --rm freqtrade create-userdir --userdir user_data\n\n# Create configuration - Requires answering interactive questions\ndocker compose run --rm freqtrade new-config --config user_data/config.json\nThe above snippet creates a new directory called ft_userdata, downloads the latest compose file and pulls the freqtrade image. The last 2 steps in the snippet create the directory with user_data, as well as (interactively) the default configuration based on your selections.
How to edit the bot configuration?
You can edit the configuration at any time, which is available as user_data/config.json (within the directory ft_userdata) when using the above configuration.
You can also change the both Strategy and commands by editing the command section of your docker-compose.yml file.
user_data/config.jsonuser_data/strategies/docker-compose.yml fileThe SampleStrategy is run by default.
SampleStrategy is just a demo!
The SampleStrategy is there for your reference and give you ideas for your own strategy. Please always backtest your strategy and use dry-run for some time before risking real money! You will find more information about Strategy development in the Strategy documentation.
Once this is done, you're ready to launch the bot in trading mode (Dry-run or Live-trading, depending on your answer to the corresponding question you made above).
docker compose up -d\nDefault configuration
While the configuration generated will be mostly functional, you will still need to verify that all options correspond to what you want (like Pricing, pairlist, ...) before starting the bot.
"},{"location":"docker_quickstart/#accessing-the-ui","title":"Accessing the UI","text":"If you've selected to enable FreqUI in the new-config step, you will have freqUI available at port localhost:8080.
You can now access the UI by typing localhost:8080 in your browser.
UI Access on a remote serverIf you're running on a VPS, you should consider using either a ssh tunnel, or setup a VPN (openVPN, wireguard) to connect to your bot. This will ensure that freqUI is not directly exposed to the internet, which is not recommended for security reasons (freqUI does not support https out of the box). Setup of these tools is not part of this tutorial, however many good tutorials can be found on the internet. Please also read the API configuration with docker section to learn more about this configuration.
"},{"location":"docker_quickstart/#monitoring-the-bot","title":"Monitoring the bot","text":"You can check for running instances with docker compose ps. This should list the service freqtrade as running. If that's not the case, best check the logs (see next point).
Logs will be written to: user_data/logs/freqtrade.log. You can also check the latest log with the command docker compose logs -f.
The database will be located at: user_data/tradesv3.sqlite
Updating freqtrade when using docker is as simple as running the following 2 commands:
# Download the latest image\ndocker compose pull\n# Restart the image\ndocker compose up -d\nThis will first pull the latest image, and will then restart the container with the just pulled version.
Check the Changelog
You should always check the changelog for breaking changes / manual interventions required and make sure the bot starts correctly after the update.
"},{"location":"docker_quickstart/#editing-the-docker-compose-file","title":"Editing the docker-compose file","text":"Advanced users may edit the docker-compose file further to include all possible options or arguments.
All freqtrade arguments will be available by running docker compose run --rm freqtrade <command> <optional arguments>.
docker compose for trade commands
Trade commands (freqtrade trade <...>) should not be ran via docker compose run - but should use docker compose up -d instead. This makes sure that the container is properly started (including port forwardings) and will make sure that the container will restart after a system reboot. If you intend to use freqUI, please also ensure to adjust the configuration accordingly, otherwise the UI will not be available.
docker compose run --rm
Including --rm will remove the container after completion, and is highly recommended for all modes except trading mode (running with freqtrade trade command).
\"docker compose run --rm\" will require a compose file to be provided. Some freqtrade commands that don't require authentication such as list-pairs can be run with \"docker run --rm\" instead. For example docker run --rm freqtradeorg/freqtrade:stable list-pairs --exchange binance --quote BTC --print-json. This can be useful for fetching exchange information to add to your config.json without affecting your running containers.
Download backtesting data for 5 days for the pair ETH/BTC and 1h timeframe from Binance. The data will be stored in the directory user_data/data/ on the host.
docker compose run --rm freqtrade download-data --pairs ETH/BTC --exchange binance --days 5 -t 1h\nHead over to the Data Downloading Documentation for more details on downloading data.
"},{"location":"docker_quickstart/#example-backtest-with-docker","title":"Example: Backtest with docker","text":"Run backtesting in docker-containers for SampleStrategy and specified timerange of historical data, on 5m timeframe:
docker compose run --rm freqtrade backtesting --config user_data/config.json --strategy SampleStrategy --timerange 20190801-20191001 -i 5m\nHead over to the Backtesting Documentation to learn more.
"},{"location":"docker_quickstart/#additional-dependencies-with-docker","title":"Additional dependencies with docker","text":"If your strategy requires dependencies not included in the default image - it will be necessary to build the image on your host. For this, please create a Dockerfile containing installation steps for the additional dependencies (have a look at docker/Dockerfile.custom for an example).
You'll then also need to modify the docker-compose.yml file and uncomment the build step, as well as rename the image to avoid naming collisions.
image: freqtrade_custom\n build:\n context: .\n dockerfile: \"./Dockerfile.<yourextension>\"\nYou can then run docker compose build --pull to build the docker image, and run it using the commands described above.
Commands freqtrade plot-profit and freqtrade plot-dataframe (Documentation) are available by changing the image to *_plot in your docker-compose.yml file. You can then use these commands as follows:
docker compose run --rm freqtrade plot-dataframe --strategy AwesomeStrategy -p BTC/ETH --timerange=20180801-20180805\nThe output will be stored in the user_data/plot directory, and can be opened with any modern browser.
Freqtrade provides a docker-compose file which starts up a jupyter lab server. You can run this server using the following command:
docker compose -f docker/docker-compose-jupyter.yml up\nThis will create a docker-container running jupyter lab, which will be accessible using https://127.0.0.1:8888/lab. Please use the link that's printed in the console after startup for simplified login.
Since part of this image is built on your machine, it is recommended to rebuild the image from time to time to keep freqtrade (and dependencies) up-to-date.
docker compose -f docker/docker-compose-jupyter.yml build --no-cache\nError: \"Timestamp for this request is outside of the recvWindow.\" The market api requests require a synchronized clock but the time in the docker container shifts a bit over time into the past. To fix this issue temporarily you need to run wsl --shutdown and restart docker again (a popup on windows 10 will ask you to do so). A permanent solution is either to host the docker container on a linux host or restart the wsl from time to time with the scheduler.
taskkill /IM \"Docker Desktop.exe\" /F\nwsl --shutdown\nstart \"\" \"C:\\Program Files\\Docker\\Docker\\Docker Desktop.exe\"\nWarning
Due to the above, we do not recommend the usage of docker on windows for production setups, but only for experimentation, datadownload and backtesting. Best use a linux-VPS for running freqtrade reliably.
"},{"location":"exchanges/","title":"Exchange-specific Notes","text":"This page combines common gotchas and Information which are exchange-specific and most likely don't apply to other exchanges.
"},{"location":"exchanges/#exchange-configuration","title":"Exchange configuration","text":"Freqtrade is based on CCXT library that supports over 100 cryptocurrency exchange markets and trading APIs. The complete up-to-date list can be found in the CCXT repo homepage. However, the bot was tested by the development team with only a few exchanges. A current list of these can be found in the \"Home\" section of this documentation.
Feel free to test other exchanges and submit your feedback or PR to improve the bot or confirm exchanges that work flawlessly..
Some exchanges require special configuration, which can be found below.
"},{"location":"exchanges/#sample-exchange-configuration","title":"Sample exchange configuration","text":"A exchange configuration for \"binance\" would look as follows:
\"exchange\": {\n \"name\": \"binance\",\n \"key\": \"your_exchange_key\",\n \"secret\": \"your_exchange_secret\",\n \"ccxt_config\": {},\n \"ccxt_async_config\": {},\n // ... \nUsually, rate limits set by CCXT are reliable and work well. In case of problems related to rate-limits (usually DDOS Exceptions in your logs), it's easy to change rateLimit settings to other values.
\"exchange\": {\n \"name\": \"kraken\",\n \"key\": \"your_exchange_key\",\n \"secret\": \"your_exchange_secret\",\n \"ccxt_config\": {\"enableRateLimit\": true},\n \"ccxt_async_config\": {\n \"enableRateLimit\": true,\n \"rateLimit\": 3100\n },\nThis configuration enables kraken, as well as rate-limiting to avoid bans from the exchange. \"rateLimit\": 3100 defines a wait-event of 3.1s between each call. This can also be completely disabled by setting \"enableRateLimit\" to false.
Note
Optimal settings for rate-limiting depend on the exchange and the size of the whitelist, so an ideal parameter will vary on many other settings. We try to provide sensible defaults per exchange where possible, if you encounter bans please make sure that \"enableRateLimit\" is enabled and increase the \"rateLimit\" parameter step by step.
Server location and geo-ip restrictions
Please be aware that Binance restricts API access regarding the server country. The current and non-exhaustive countries blocked are Canada, Malaysia, Netherlands and United States. Please go to binance terms > b. Eligibility to find up to date list.
Binance supports time_in_force.
Stoploss on Exchange
Binance supports stoploss_on_exchange and uses stop-loss-limit orders. It provides great advantages, so we recommend to benefit from it by enabling stoploss on exchange. On futures, Binance supports both stop-limit as well as stop-market orders. You can use either \"limit\" or \"market\" in the order_types.stoploss configuration setting to decide which type to use.
For Binance, it is suggested to add \"BNB/<STAKE>\" to your blacklist to avoid issues, unless you are willing to maintain enough extra BNB on the account or unless you're willing to disable using BNB for fees. Binance accounts may use BNB for fees, and if a trade happens to be on BNB, further trades may consume this position and make the initial BNB trade unsellable as the expected amount is not there anymore.
If not enough BNB is available to cover transaction fees, then fees will not be covered by BNB and no fee reduction will occur. Freqtrade will never buy BNB to cover for fees. BNB needs to be bought and monitored manually to this end.
Binance has been split into 2, and users must use the correct ccxt exchange ID for their exchange, otherwise API keys are not recognized.
binance.binanceus.Freqtrade supports binance RSA API keys.
We recommend to use them as environment variable.
export FREQTRADE__EXCHANGE__SECRET=\"$(cat ./rsa_binance.private)\"\nThey can however also be configured via configuration file. Since json doesn't support multi-line strings, you'll have to replace all newlines with \\n to have a valid json file.
// ...\n \"key\": \"<someapikey>\",\n \"secret\": \"-----BEGIN PRIVATE KEY-----\\nMIIEvQIBABACAFQA<...>s8KX8=\\n-----END PRIVATE KEY-----\"\n// ...\nBinance has specific (unfortunately complex) Futures Trading Quantitative Rules which need to be followed, and which prohibit a too low stake-amount (among others) for too many orders. Violating these rules will result in a trading restriction.
When trading on Binance Futures market, orderbook must be used because there is no price ticker data for futures.
\"entry_pricing\": {\n \"use_order_book\": true,\n \"order_book_top\": 1,\n \"check_depth_of_market\": {\n \"enabled\": false,\n \"bids_to_ask_delta\": 1\n }\n },\n \"exit_pricing\": {\n \"use_order_book\": true,\n \"order_book_top\": 1\n },\nUsers will also have to have the futures-setting \"Position Mode\" set to \"One-way Mode\", and \"Asset Mode\" set to \"Single-Asset Mode\". These settings will be checked on startup, and freqtrade will show an error if this setting is wrong.
Freqtrade will not attempt to change these settings.
"},{"location":"exchanges/#binance-bnfcr-futures","title":"Binance BNFCR futures","text":"BNFCR mode are a special type of futures mode on Binance to work around regulatory issues in Europe. To use BNFCR futures, you will have to have the following combination of settings:
{\n // ...\n \"trading_mode\": \"futures\",\n \"margin_mode\": \"cross\",\n \"proxy_coin\": \"BNFCR\",\n \"stake_currency\": \"USDT\" // or \"USDC\"\n // ...\n}\nThe stake_currency setting defines the markets the bot will be operating in. This choice is really arbitrary.
On the exchange, you'll have to use \"Multi-asset Mode\" - and \"Position Mode set to \"One-way Mode\". Freqtrade will check these settings on startup, but won't attempt to change them.
"},{"location":"exchanges/#bingx","title":"Bingx","text":"BingX supports time_in_force with settings \"GTC\" (good till cancelled), \"IOC\" (immediate-or-cancel) and \"PO\" (Post only) settings.
Stoploss on Exchange
Bingx supports stoploss_on_exchange and can use both stop-limit and stop-market orders. It provides great advantages, so we recommend to benefit from it by enabling stoploss on exchange.
Kraken supports time_in_force with settings \"GTC\" (good till cancelled), \"IOC\" (immediate-or-cancel) and \"PO\" (Post only) settings.
Stoploss on Exchange
Kraken supports stoploss_on_exchange and can use both stop-loss-market and stop-loss-limit orders. It provides great advantages, so we recommend to benefit from it. You can use either \"limit\" or \"market\" in the order_types.stoploss configuration setting to decide which type to use.
The Kraken API does only provide 720 historic candles, which is sufficient for Freqtrade dry-run and live trade modes, but is a problem for backtesting. To download data for the Kraken exchange, using --dl-trades is mandatory, otherwise the bot will download the same 720 candles over and over, and you'll not have enough backtest data.
To speed up downloading, you can download the trades zip files kraken provides. These are usually updated once per quarter. Freqtrade expects these files to be placed in user_data/data/kraken/trades_csv.
A structure as follows can make sense if using incremental files, with the \"full\" history in one directory, and incremental files in different directories. The assumption for this mode is that the data is downloaded and unzipped keeping filenames as they are. Duplicate content will be ignored (based on timestamp) - though the assumption is that there is no gap in the data.
This means, if your \"full\" history ends in Q4 2022 - then both incremental updates Q1 2023 and Q2 2023 are available. Not having this will lead to incomplete data, and therefore invalid results while using the data.
\u2514\u2500\u2500 trades_csv\n\u00a0 \u00a0 \u251c\u2500\u2500 Kraken_full_history\n \u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 BCHEUR.csv\n \u00a0\u00a0 \u2502\u00a0\u00a0 \u2514\u2500\u2500 XBTEUR.csv\n \u00a0\u00a0 \u251c\u2500\u2500 Kraken_Trading_History_Q1_2023\n \u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 BCHEUR.csv\n \u00a0\u00a0 \u2502\u00a0\u00a0 \u2514\u2500\u2500 XBTEUR.csv\n \u00a0\u00a0 \u2514\u2500\u2500 Kraken_Trading_History_Q2_2023\n \u00a0\u00a0 \u00a0\u00a0 \u251c\u2500\u2500 BCHEUR.csv\n \u00a0\u00a0 \u00a0\u00a0 \u2514\u2500\u2500 XBTEUR.csv\nYou can convert these files into freqtrade files:
freqtrade convert-trade-data --exchange kraken --format-from kraken_csv --format-to feather\n# Convert trade data to different ohlcv timeframes\nfreqtrade trades-to-ohlcv -p BTC/EUR BCH/EUR --exchange kraken -t 1m 5m 15m 1h\nThe converted data also makes downloading data possible, and will start the download after the latest loaded trade.
freqtrade download-data --exchange kraken --dl-trades -p BTC/EUR BCH/EUR \nDownloading data from kraken
Downloading kraken data will require significantly more memory (RAM) than any other exchange, as the trades-data needs to be converted into candles on your machine. It will also take a long time, as freqtrade will need to download every single trade that happened on the exchange for the pair / timerange combination, therefore please be patient.
rateLimit tuning
Please pay attention that rateLimit configuration entry holds delay in milliseconds between requests, NOT requests/sec rate. So, in order to mitigate Kraken API \"Rate limit exceeded\" exception, this configuration should be increased, NOT decreased.
"},{"location":"exchanges/#kucoin","title":"Kucoin","text":"Kucoin requires a passphrase for each api key, you will therefore need to add this key into the configuration so your exchange section looks as follows:
\"exchange\": {\n \"name\": \"kucoin\",\n \"key\": \"your_exchange_key\",\n \"secret\": \"your_exchange_secret\",\n \"password\": \"your_exchange_api_key_password\",\n // ...\n}\nKucoin supports time_in_force with settings \"GTC\" (good till cancelled), \"FOK\" (full-or-cancel) and \"IOC\" (immediate-or-cancel) settings.
Stoploss on Exchange
Kucoin supports stoploss_on_exchange and can use both stop-loss-market and stop-loss-limit orders. It provides great advantages, so we recommend to benefit from it. You can use either \"limit\" or \"market\" in the order_types.stoploss configuration setting to decide which type of stoploss shall be used.
For Kucoin, it is suggested to add \"KCS/<STAKE>\" to your blacklist to avoid issues, unless you are willing to maintain enough extra KCS on the account or unless you're willing to disable using KCS for fees. Kucoin accounts may use KCS for fees, and if a trade happens to be on KCS, further trades may consume this position and make the initial KCS trade unsellable as the expected amount is not there anymore.
Stoploss on Exchange
HTX supports stoploss_on_exchange and uses stop-limit orders. It provides great advantages, so we recommend to benefit from it by enabling stoploss on exchange.
OKX requires a passphrase for each api key, you will therefore need to add this key into the configuration so your exchange section looks as follows:
\"exchange\": {\n \"name\": \"okx\",\n \"key\": \"your_exchange_key\",\n \"secret\": \"your_exchange_secret\",\n \"password\": \"your_exchange_api_key_password\",\n // ...\n}\nIf you've registered with OKX on the host my.okx.com (OKX EAA)- you will need to use \"myokx\" as the exchange name. Using the wrong exchange will result in the error \"OKX Error 50119: API key doesn't exist\" - as the 2 are separate entities.
Warning
OKX only provides 100 candles per api call. Therefore, the strategy will only have a pretty low amount of data available in backtesting mode.
Futures
OKX Futures has the concept of \"position mode\" - which can be \"Buy/Sell\" or long/short (hedge mode). Freqtrade supports both modes (we recommend to use Buy/Sell mode) - but changing the mode mid-trading is not supported and will lead to exceptions and failures to place trades. OKX also only provides MARK candles for the past ~3 months. Backtesting futures prior to that date will therefore lead to slight deviations, as funding-fees cannot be calculated correctly without this data.
"},{"location":"exchanges/#gateio","title":"Gate.io","text":"Stoploss on Exchange
Gate.io supports stoploss_on_exchange and uses stop-loss-limit orders. It provides great advantages, so we recommend to benefit from it by enabling stoploss on exchange.
Gate.io supports time_in_force with settings \"GTC\" (good till cancelled), and \"IOC\" (immediate-or-cancel) settings.
Gate.io allows the use of POINT to pay for fees. As this is not a tradable currency (no regular market available), automatic fee calculations will fail (and default to a fee of 0). The configuration parameter exchange.unknown_fee_rate can be used to specify the exchange rate between Point and the stake currency. Obviously, changing the stake-currency will also require changes to this value.
Gate API keys require the following permissions on top of the market type you want to trade:
Without these permissions, the bot will not start correctly and show errors like \"permission missing\".
"},{"location":"exchanges/#bybit","title":"Bybit","text":"Stoploss on Exchange
Bybit (futures only) supports stoploss_on_exchange and uses stop-loss-limit orders. It provides great advantages, so we recommend to benefit from it by enabling stoploss on exchange. On futures, Bybit supports both stop-limit as well as stop-market orders. You can use either \"limit\" or \"market\" in the order_types.stoploss configuration setting to decide which type to use.
Bybit supports time_in_force with settings \"GTC\" (good till cancelled), \"FOK\" (full-or-cancel), \"IOC\" (immediate-or-cancel) and \"PO\" (Post only) settings.
Futures trading on bybit is currently supported for isolated futures mode.
On startup, freqtrade will set the position mode to \"One-way Mode\" for the whole (sub)account. This avoids making this call over and over again (slowing down bot operations), but means that manual changes to this setting may result in exceptions and errors.
As bybit doesn't provide funding rate history, the dry-run calculation is used for live trades as well.
API Keys for live futures trading must have the following permissions:
We do strongly recommend to limit all API keys to the IP you're going to use it from.
Unified accounts
Freqtrade assumes accounts to be dedicated to the bot. We therefore recommend the usage of one subaccount per bot. This is especially important when using unified accounts. Other configurations (multiple bots on one account, manual non-bot trades on the bot account) are not supported and may lead to unexpected behavior.
"},{"location":"exchanges/#bitmart","title":"Bitmart","text":"Bitmart requires the API key Memo (the name you give the API key) to go along with the exchange key and secret. It's therefore required to pass the UID as well.
\"exchange\": {\n \"name\": \"bitmart\",\n \"uid\": \"your_bitmart_api_key_memo\",\n \"secret\": \"your_exchange_secret\",\n \"password\": \"your_exchange_api_key_password\",\n // ...\n}\nNecessary Verification
Bitmart requires Verification Lvl2 to successfully trade on the spot market through the API - even though trading via UI works just fine with just Lvl1 verification.
"},{"location":"exchanges/#bitget","title":"Bitget","text":"Bitget requires a passphrase for each api key, you will therefore need to add this key into the configuration so your exchange section looks as follows:
\"exchange\": {\n \"name\": \"bitget\",\n \"key\": \"your_exchange_key\",\n \"secret\": \"your_exchange_secret\",\n \"password\": \"your_exchange_api_key_password\",\n // ...\n}\nBitget supports time_in_force with settings \"GTC\" (good till cancelled), \"FOK\" (full-or-cancel), \"IOC\" (immediate-or-cancel) and \"PO\" (Post only) settings.
Stoploss on Exchange
Bitget supports stoploss_on_exchange and can use both stop-loss-market and stop-loss-limit orders. It provides great advantages, so we recommend to benefit from it. You can use either \"limit\" or \"market\" in the order_types.stoploss configuration setting to decide which type of stoploss shall be used.
Stoploss on Exchange
Hyperliquid supports stoploss_on_exchange and uses stop-loss-limit orders. It provides great advantages, so we recommend to benefit from it.
Hyperliquid is a Decentralized Exchange (DEX). Decentralized exchanges work a bit different compared to normal exchanges. Instead of authenticating private API calls using an API key, private API calls need to be signed with the private key of your wallet (We recommend using an api Wallet for this, generated either on Hyperliquid or in your wallet of choice). This needs to be configured like this:
\"exchange\": {\n \"name\": \"hyperliquid\",\n \"walletAddress\": \"your_eth_wallet_address\", // This should NOT be your API Wallet Address!\n \"privateKey\": \"your_api_private_key\",\n // ...\n}\n0x<40 hex characters> - Can be easily copied from your wallet - and should be your main wallet address, not your API Wallet Address.0x<64 hex characters> - Use the key the API Wallet shows on creation.Hyperliquid handles deposits and withdrawals on the Arbitrum One chain, a Layer 2 scaling solution built on top of Ethereum. Hyperliquid uses USDC as quote / collateral. The process of depositing USDC on Hyperliquid requires a couple of steps, see how to start trading for details on what steps are needed.
Hyperliquid general usage Notes
Hyperliquid does not support market orders, however ccxt will simulate market orders by placing limit orders with a maximum slippage of 5%. Unfortunately, hyperliquid only offers 5000 historic candles, so backtesting will either need to build candles historically (by waiting and downloading the data incrementally over time) - or will be limited to the last 5000 candles.
Some general best practices (non exhaustive)
Hyperliquid allows you to create either a vault or a subaccount. To use these with Freqtrade, you will need to use the following configuration pattern:
\"exchange\": {\n \"name\": \"hyperliquid\",\n \"walletAddress\": \"your_vault_address\", // Vault or subaccount address\n \"privateKey\": \"your_api_private_key\",\n \"ccxt_config\": {\n \"options\": {\n \"vaultAddress\": \"your_vault_address\" // Optional, only if you want to use a vault or subaccount\n }\n },\n // ...\n}\nYour balance and trades will now be used from your vault / subaccount - and no longer from your main account.
"},{"location":"exchanges/#historic-hyperliquid-data","title":"Historic Hyperliquid data","text":"The Hyperliquid API does not provide historic data beyond the single call to fetch current data, so downloading data is not possible, as the downloaded data would not constitute proper historic data.
"},{"location":"exchanges/#bitvavo","title":"Bitvavo","text":"If your account is required to use an operatorId, you can set it in the configuration file as follows:
\"exchange\": {\n \"name\": \"bitvavo\",\n \"key\": \"\",\n \"secret\": \"\",\n \"ccxt_config\": {\n \"options\": {\n \"operatorId\": \"123567\"\n }\n },\n }\nBitvavo expects the operatorId to be an integer.
Should you experience constant errors with Nonce (like InvalidNonce), it is best to regenerate the API keys. Resetting Nonce is difficult and it's usually easier to regenerate the API keys.
theocean) exchange uses Web3 functionality and requires web3 python package to be installed:pip3 install web3\nMost exchanges return current incomplete candle via their OHLCV/klines API interface. By default, Freqtrade assumes that incomplete candle is fetched from the exchange and removes the last candle assuming it's the incomplete candle.
Whether your exchange returns incomplete candles or not can be checked using the helper script from the Contributor documentation.
Due to the danger of repainting, Freqtrade does not allow you to use this incomplete candle.
However, if it is based on the need for the latest price for your strategy - then this requirement can be acquired using the data provider from within the strategy.
"},{"location":"exchanges/#advanced-freqtrade-exchange-configuration","title":"Advanced Freqtrade Exchange configuration","text":"Advanced options can be configured using the _ft_has_params setting, which will override Defaults and exchange-specific behavior.
Available options are listed in the exchange-class as _ft_has_default.
For example, to test the order type FOK with Kraken, and modify candle limit to 200 (so you only get 200 candles per API call):
\"exchange\": {\n \"name\": \"kraken\",\n \"_ft_has_params\": {\n \"order_time_in_force\": [\"GTC\", \"FOK\"],\n \"ohlcv_candle_limit\": 200\n }\n //...\n}\nWarning
Please make sure to fully understand the impacts of these settings before modifying them.
"},{"location":"faq/","title":"Freqtrade FAQ","text":""},{"location":"faq/#supported-markets","title":"Supported Markets","text":"Freqtrade supports spot trading, as well as (isolated) futures trading for some selected exchanges. Please refer to the documentation start page for an up-to-date list of supported exchanges.
"},{"location":"faq/#can-my-bot-open-short-positions","title":"Can my bot open short positions?","text":"Freqtrade can open short positions in futures markets. This requires the strategy to be made for this - and \"trading_mode\": \"futures\" in the configuration. Please make sure to read the relevant documentation page first.
In spot markets, you can in some cases use leveraged spot tokens, which reflect an inverted pair (eg. BTCUP/USD, BTCDOWN/USD, ETHBULL/USD, ETHBEAR/USD,...) which can be traded with Freqtrade.
"},{"location":"faq/#can-my-bot-trade-options-or-futures","title":"Can my bot trade options or futures?","text":"Futures trading is supported for selected exchanges. Please refer to the documentation start page for an up-to-date list of supported exchanges.
"},{"location":"faq/#beginner-tips-tricks","title":"Beginner Tips & Tricks","text":"No. Freqtrade will only open one position per pair at a time. You can however use the adjust_trade_position() callback to adjust an open position.
Backtesting provides an option for this in --eps - however this is only there to highlight \"hidden\" signals, and will not work in live.
Running the bot with freqtrade trade --config config.json shows the output freqtrade: command not found.
This could be caused by the following reasons:
source .venv/bin/activate to activate the virtual environment.Make sure you set the initial_state config option to \"running\" in your config.json
I understand your disappointment but unfortunately 12 trades is just not enough to say anything. If you run backtesting, you can see that the current algorithm does leave you on the plus side, but that is after thousands of trades and even there, you will be left with losses on specific coins that you have traded tens if not hundreds of times. We of course constantly aim to improve the bot but it will always be a gamble, which should leave you with modest wins on monthly basis but you can't say much from few trades.
"},{"location":"faq/#id-like-to-make-changes-to-the-config-can-i-do-that-without-having-to-kill-the-bot","title":"I\u2019d like to make changes to the config. Can I do that without having to kill the bot?","text":"Yes. You can edit your config and use the /reload_config command to reload the configuration. The bot will stop, reload the configuration and strategy and will restart with the new configuration and strategy.
This is called \"coin dust\" and can happen on all exchanges. It happens because many exchanges subtract fees from the \"receiving currency\" - so you buy 100 COIN - but you only get 99.9 COIN. As COIN is trading in full lot sizes (1COIN steps), you cannot sell 0.9 COIN (or 99.9 COIN) - but you need to round down to 99 COIN.
This is not a bot-problem, but will also happen while manual trading.
While freqtrade can handle this (it'll sell 99 COIN), fees are often below the minimum tradable lot-size (you can only trade full COIN, not 0.9 COIN). Leaving the dust (0.9 COIN) on the exchange makes usually sense, as the next time freqtrade buys COIN, it'll eat into the remaining small balance, this time selling everything it bought, and therefore slowly declining the dust balance (although it most likely will never reach exactly 0).
Where possible (e.g. on binance), the use of the exchange's dedicated fee currency will fix this. On binance, it's sufficient to have BNB in your account, and have \"Pay fees in BNB\" enabled in your profile. Your BNB balance will slowly decline (as it's used to pay fees) - but you'll no longer encounter dust (Freqtrade will include the fees in the profit calculations). Other exchanges don't offer such possibilities, where it's simply something you'll have to accept or move to a different exchange.
"},{"location":"faq/#i-deposited-more-funds-to-the-exchange-but-my-bot-doesnt-recognize-this","title":"I deposited more funds to the exchange, but my bot doesn't recognize this","text":"Freqtrade will update the exchange balance when necessary (Before placing an order). RPC calls (Telegram's /balance, API calls to /balance) can trigger an update at max. once per hour.
If adjust_trade_position is enabled (and the bot has open trades eligible for position adjustments) - then the wallets will be refreshed once per hour. To force an immediate update, you can use /reload_config - which will restart the bot.
Freqtrade will not provide incomplete candles to strategies. Using incomplete candles will lead to repainting and consequently to strategies with \"ghost\" buys, which are impossible to both backtest, and verify after they happened.
You can use \"current\" market data by using the dataprovider's orderbook or ticker methods - which however cannot be used during backtesting.
"},{"location":"faq/#is-there-a-setting-to-only-exit-the-trades-being-held-and-not-perform-any-new-entries","title":"Is there a setting to only Exit the trades being held and not perform any new Entries?","text":"You can use the /stopentry command in Telegram to prevent future trade entry, followed by /forceexit all (sell all open trades).
Freqtrade assumes that the trades it opens are managed only though the bot. If you happen to (accidentally) sell the bot's capital, freqtrade will try to recover by trying to re-find on-exchange orders.
This is a best-effort approach, and will not work in all cases, especially when using order types that are not supported by freqtrade (OCO, iceberg, etc.), or when working with older trades (where the exchange no longer provides full order information). The exact limits will vary between exchanges - with the details usually being documented in the exchange's API documentation.
"},{"location":"faq/#i-want-to-run-multiple-bots-on-the-same-machine","title":"I want to run multiple bots on the same machine","text":"Please look at the advanced setup documentation Page.
"},{"location":"faq/#im-getting-impossible-to-load-strategy-when-starting-the-bot","title":"I'm getting \"Impossible to load Strategy\" when starting the bot","text":"This error message is shown when the bot cannot load the strategy. Usually, you can use freqtrade list-strategies to list all available strategies. The output of this command will also include a status column, showing if the strategy can be loaded.
Please check the following:
user_data/strategies directory, and has the file-ending .py?This message is just a warning that the latest candles had missing candles in them. Depending on the exchange, this can indicate that the pair didn't have a trade for the timeframe you are using - and the exchange does only return candles with volume. On low volume pairs, this is a rather common occurrence.
If this happens for all pairs in the pairlist, this might indicate a recent exchange downtime. Please check your exchange's public channels for details.
Irrespectively of the reason, Freqtrade will fill up these candles with \"empty\" candles, where open, high, low and close are set to the previous candle close - and volume is empty. In a chart, this will look like a _ - and is aligned with how exchanges usually represent 0 volume candles.
This message is a warning that the candles had a price jump of > 30%. This might be a sign that the pair stopped trading, and some token exchange took place (e.g. COCOS in 2021 - where price jumped from 0.0000154 to 0.01621). This message is often accompanied by \"Missing data fillup\" - as trading on such pairs is often stopped for some time.
"},{"location":"faq/#i-want-to-reset-the-bots-database","title":"I want to reset the bot's database","text":"To reset the bot's database, you can either delete the database (by default tradesv3.sqlite or tradesv3.dryrun.sqlite), or use a different database url via --db-url (e.g. sqlite:///mynewdatabase.sqlite).
The bot is trying to tell you that it got an outdated last candle (not the last complete candle). As a consequence, Freqtrade will not enter a trade for this pair - as trading on old information is usually not what is desired.
This warning can point to one of the below problems:
This is an informational message that the bot tried to use candles from the websocket, but the exchange didn't provide the right information. This can happen if there was an interruption to the websocket connection - or if the pair didn't have any trades happen in the timeframe you are using.
Freqtrade will handle this gracefully by falling back to the REST api. While this makes the iteration slightly slower (due to the REST Api call) - it will not cause any problems to the bot's operation.
"},{"location":"faq/#im-getting-the-exchange-xxx-does-not-support-market-orders-message-and-cannot-run-my-strategy","title":"I'm getting the \"Exchange XXX does not support market orders.\" message and cannot run my strategy","text":"As the message says, your exchange does not support market orders and you have one of the order types set to \"market\". Your strategy was probably written with other exchanges in mind and sets \"market\" orders for \"stoploss\" orders, which is correct and preferable for most of the exchanges supporting market orders (but not for Gate.io).
To fix this, redefine order types in the strategy to use \"limit\" instead of \"market\":
order_types = {\n ...\n \"stoploss\": \"limit\",\n ...\n }\nThe same fix should be applied in the configuration file, if order types are defined in your custom config rather than in the strategy.
"},{"location":"faq/#im-trying-to-start-the-bot-live-but-get-an-api-permission-error","title":"I'm trying to start the bot live, but get an API permission error","text":"Errors like Invalid API-key, IP, or permissions for action mean exactly what they actually say. Your API key is either invalid (copy/paste error? check for leading/trailing spaces in the config), expired, or the IP you're running the bot from is not enabled in the Exchange's API console. Usually, the permission \"Spot Trading\" (or the equivalent in the exchange you use) will be necessary. Futures will usually have to be enabled specifically.
By default, the bot writes its log into stderr stream. This is implemented this way so that you can easily separate the bot's diagnostics messages from Backtesting, Edge and Hyperopt results, output from other various Freqtrade utility sub-commands, as well as from the output of your custom print()'s you may have inserted into your strategy. So if you need to search the log messages with the grep utility, you need to redirect stderr to stdout and disregard stdout.
$ freqtrade --some-options 2>&1 >/dev/null | grep 'something'\n2>&1 and >/dev/null should be written in this order)$ freqtrade --some-options 2> >(grep 'something') >/dev/null\n$ freqtrade --some-options 2> >(grep -v 'something' 1>&2)\n--logfile option: $ freqtrade --logfile /path/to/mylogfile.log --some-options\n$ cat /path/to/mylogfile.log | grep 'something'\n$ tail -f /path/to/mylogfile.log | grep 'something'\nOn Windows, the --logfile option is also supported by Freqtrade and you can use the findstr command to search the log for the string of interest:
> type \\path\\to\\mylogfile.log | findstr \"something\"\nFirst of all, most indicator libraries don't have GPU support - as such, there would be little benefit for indicator calculations. The GPU improvements would only apply to pandas-native calculations - or ones written by yourself.
GPU's are only good at crunching numbers (floating point operations). For hyperopt, we need both number-crunching (find next parameters) and running python code (running backtesting). As such, GPU's are not too well suited for most parts of hyperopt.
The benefit of using GPU would therefore be pretty slim - and will not justify the complexity introduced by trying to add GPU support.
There is however nothing preventing you from using GPU-enabled indicators within your strategy if you think you must have this - you will however probably be disappointed by the slim gain that will give you (compared to the complexity).
"},{"location":"faq/#how-many-epochs-do-i-need-to-get-a-good-hyperopt-result","title":"How many epochs do I need to get a good Hyperopt result?","text":"Per default Hyperopt called without the -e/--epochs command line option will only run 100 epochs, means 100 evaluations of your triggers, guards, ... Too few to find a great result (unless if you are very lucky), so you probably have to run it for 10000 or more. But it will take an eternity to compute.
Since hyperopt uses Bayesian search, running for too many epochs may not produce greater results.
It's therefore recommended to run between 500-1000 epochs over and over until you hit at least 10000 epochs in total (or are satisfied with the result). You can best judge by looking at the results - if the bot keeps discovering better strategies, it's best to keep on going.
freqtrade hyperopt --hyperopt-loss SharpeHyperOptLossDaily --strategy SampleStrategy -e 1000\nThis answer was written during the release 0.15.1, when we had:
The following calculation is still very rough and not very precise but it will give the idea. With only these triggers and guards there is already 8*10^9*10 evaluations. A roughly total of 80 billion evaluations. Did you run 100 000 evaluations? Congrats, you've done roughly 1 / 100 000 th of the search space, assuming that the bot never tests the same parameters more than once.
Example: 4% profit 650 times vs 0,3% profit a trade 10000 times in a year. If we assume you set the --timerange to 365 days.
Example: freqtrade --config config.json --strategy SampleStrategy --hyperopt SampleHyperopt -e 1000 --timerange 20190601-20200601
Freqtrade is using exclusively the following official channels:
Nobody affiliated with the freqtrade project will ask you about your exchange keys or anything else exposing your funds to exploitation. Should you be asked to expose your exchange keys or send funds to some random wallet, then please don't follow these instructions.
Failing to follow these guidelines will not be responsibility of freqtrade.
"},{"location":"faq/#support-policy","title":"Support policy","text":"We provide free support for Freqtrade on our Discord server and via GitHub issues. We only support the most recent release (e.g. 2025.8) and the current development branch (e.g. 2025.9-dev).
If you're on an older version, please follow the upgrade instructions and see if your problem has already been addressed.
"},{"location":"faq/#freqtrade-token","title":"\"Freqtrade token\"","text":"Freqtrade does not have a Crypto token offering.
Token offerings you find on the internet referring Freqtrade, FreqAI or freqUI must be considered to be a scam, trying to exploit freqtrade's popularity for their own, nefarious gains.
"},{"location":"freq-ui/","title":"FreqUI","text":"Freqtrade provides a builtin webserver, which can serve FreqUI, the freqtrade frontend.
By default, the UI is automatically installed as part of the installation (script, docker). freqUI can also be manually installed by using the freqtrade install-ui command. This same command can also be used to update freqUI to new releases.
Once the bot is started in trade / dry-run mode (with freqtrade trade) - the UI will be available under the configured API port (by default http://127.0.0.1:8080).
Developers should not use this method, but instead clone the corresponding use the method described in the freqUI repository to get the source-code of freqUI. A working installation of node will be required to build the frontend.
freqUI is not required to run freqtrade
freqUI is an optional component of freqtrade, and is not required to run the bot. It is a frontend that can be used to monitor the bot and to interact with it - but freqtrade itself will work perfectly fine without it.
"},{"location":"freq-ui/#configuration","title":"Configuration","text":"FreqUI does not have it's own configuration file - but assumes a working setup for the rest-api is available. Please refer to the corresponding documentation page to get setup with freqUI
"},{"location":"freq-ui/#ui","title":"UI","text":"FreqUI is a modern, responsive web application that can be used to monitor and interact with your bot.
FreqUI provides a light, as well as a dark theme. Themes can be easily switched via a prominent button at the top of the page. The theme of the screenshots on this page will adapt to the selected documentation Theme, so to see the dark (or light) version, please switch the theme of the Documentation.
"},{"location":"freq-ui/#login","title":"Login","text":"The below screenshot shows the login screen of freqUI.
CORS
The Cors error shown in this screenshot is due to the fact that the UI is running on a different port than the API, and CORS has not been setup correctly yet.
"},{"location":"freq-ui/#trade-view","title":"Trade view","text":"The trade view allows you to visualize the trades that the bot is making and to interact with the bot. On this page, you can also interact with the bot by starting and stopping it and - if configured - force trade entries and exits.
"},{"location":"freq-ui/#plot-configurator","title":"Plot Configurator","text":"
FreqUI Plots can be configured either via a plot_config configuration object in the strategy (which can be loaded via \"from strategy\" button) or via the UI. Multiple plot configurations can be created and switched at will - allowing for flexible, different views into your charts.
The plot configuration can be accessed via the \"Plot Configurator\" (Cog icon) button in the top right corner of the trade view.
"},{"location":"freq-ui/#settings","title":"Settings","text":"
Several UI related settings can be changed by accessing the settings page.
Things you can change (among others):
"},{"location":"freq-ui/#webserver-mode","title":"Webserver mode","text":"
when freqtrade is started in webserver mode (freqtrade started with freqtrade webserver), the webserver will start in a special mode allowing for additional features, for example:
When freqtrade is started in webserver mode (freqtrade started with freqtrade webserver), the backtesting view becomes available. This view allows you to backtest strategies and visualize the results.
You can also load and visualize previous backtest results, as well as compare the results with each other.
"},{"location":"freq-ui/#cors","title":"CORS","text":"
This whole section is only necessary in cross-origin cases (where you multiple bot API's running on localhost:8081, localhost:8082, ...), and want to combine them into one FreqUI instance.
All web-based front-ends are subject to CORS - Cross-Origin Resource Sharing. Since most of the requests to the Freqtrade API must be authenticated, a proper CORS policy is key to avoid security problems. Also, the standard disallows * CORS policies for requests with credentials, so this setting must be set appropriately.
Users can allow access from different origin URL's to the bot API via the CORS_origins configuration setting. It consists of a list of allowed URL's that are allowed to consume resources from the bot's API.
Assuming your application is deployed as https://frequi.freqtrade.io/home/ - this would mean that the following configuration becomes necessary:
{\n //...\n \"jwt_secret_key\": \"somethingrandom\",\n \"CORS_origins\": [\"https://frequi.freqtrade.io\"],\n //...\n}\nIn the following (pretty common) case, FreqUI is accessible on http://localhost:8080/trade (this is what you see in your navbar when navigating to freqUI).
The correct configuration for this case is http://localhost:8080 - the main part of the URL including the port.
{\n //...\n \"jwt_secret_key\": \"somethingrandom\",\n \"CORS_origins\": [\"http://localhost:8080\"],\n //...\n}\ntrailing Slash
The trailing slash is not allowed in the CORS_origins configuration (e.g. \"http://localhots:8080/\"). Such a configuration will not take effect, and the cors errors will remain.
Note
We strongly recommend to also set jwt_secret_key to something random and known only to yourself to avoid unauthorized access to your bot.
FreqAI is configured through the typical Freqtrade config file and the standard Freqtrade strategy. Examples of FreqAI config and strategy files can be found in config_examples/config_freqai.example.json and freqtrade/templates/FreqaiExampleStrategy.py, respectively.
Although there are plenty of additional parameters to choose from, as highlighted in the parameter table, a FreqAI config must at minimum include the following parameters (the parameter values are only examples):
\"freqai\": {\n \"enabled\": true,\n \"purge_old_models\": 2,\n \"train_period_days\": 30,\n \"backtest_period_days\": 7,\n \"identifier\" : \"unique-id\",\n \"feature_parameters\" : {\n \"include_timeframes\": [\"5m\",\"15m\",\"4h\"],\n \"include_corr_pairlist\": [\n \"ETH/USD\",\n \"LINK/USD\",\n \"BNB/USD\"\n ],\n \"label_period_candles\": 24,\n \"include_shifted_candles\": 2,\n \"indicator_periods_candles\": [10, 20]\n },\n \"data_split_parameters\" : {\n \"test_size\": 0.25\n }\n }\nA full example config is available in config_examples/config_freqai.example.json.
Note
The identifier is commonly overlooked by newcomers, however, this value plays an important role in your configuration. This value is a unique ID that you choose to describe one of your runs. Keeping it the same allows you to maintain crash resilience as well as faster backtesting. As soon as you want to try a new run (new features, new model, etc.), you should change this value (or delete the user_data/models/unique-id folder. More details available in the parameter table.
The FreqAI strategy requires including the following lines of code in the standard Freqtrade strategy:
# user should define the maximum startup candle count (the largest number of candles\n # passed to any single indicator)\n startup_candle_count: int = 20\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n\n # the model will return all labels created by user in `set_freqai_targets()`\n # (& appended targets), an indication of whether or not the prediction should be accepted,\n # the target mean/std values for each of the labels created by user in\n # `set_freqai_targets()` for each training period.\n\n dataframe = self.freqai.start(dataframe, metadata, self)\n\n return dataframe\n\n def feature_engineering_expand_all(self, dataframe: DataFrame, period, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This function will automatically expand the defined features on the config defined\n `indicator_periods_candles`, `include_timeframes`, `include_shifted_candles`, and\n `include_corr_pairs`. In other words, a single feature defined in this function\n will automatically expand to a total of\n `indicator_periods_candles` * `include_timeframes` * `include_shifted_candles` *\n `include_corr_pairs` numbers of features added to the model.\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n :param df: strategy dataframe which will receive the features\n :param period: period of the indicator - usage example:\n dataframe[\"%-ema-period\"] = ta.EMA(dataframe, timeperiod=period)\n \"\"\"\n\n dataframe[\"%-rsi-period\"] = ta.RSI(dataframe, timeperiod=period)\n dataframe[\"%-mfi-period\"] = ta.MFI(dataframe, timeperiod=period)\n dataframe[\"%-adx-period\"] = ta.ADX(dataframe, timeperiod=period)\n dataframe[\"%-sma-period\"] = ta.SMA(dataframe, timeperiod=period)\n dataframe[\"%-ema-period\"] = ta.EMA(dataframe, timeperiod=period)\n\n return dataframe\n\n def feature_engineering_expand_basic(self, dataframe: DataFrame, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This function will automatically expand the defined features on the config defined\n `include_timeframes`, `include_shifted_candles`, and `include_corr_pairs`.\n In other words, a single feature defined in this function\n will automatically expand to a total of\n `include_timeframes` * `include_shifted_candles` * `include_corr_pairs`\n numbers of features added to the model.\n\n Features defined here will *not* be automatically duplicated on user defined\n `indicator_periods_candles`\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n :param df: strategy dataframe which will receive the features\n dataframe[\"%-pct-change\"] = dataframe[\"close\"].pct_change()\n dataframe[\"%-ema-200\"] = ta.EMA(dataframe, timeperiod=200)\n \"\"\"\n dataframe[\"%-pct-change\"] = dataframe[\"close\"].pct_change()\n dataframe[\"%-raw_volume\"] = dataframe[\"volume\"]\n dataframe[\"%-raw_price\"] = dataframe[\"close\"]\n return dataframe\n\n def feature_engineering_standard(self, dataframe: DataFrame, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This optional function will be called once with the dataframe of the base timeframe.\n This is the final function to be called, which means that the dataframe entering this\n function will contain all the features and columns created by all other\n freqai_feature_engineering_* functions.\n\n This function is a good place to do custom exotic feature extractions (e.g. tsfresh).\n This function is a good place for any feature that should not be auto-expanded upon\n (e.g. day of the week).\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n :param df: strategy dataframe which will receive the features\n usage example: dataframe[\"%-day_of_week\"] = (dataframe[\"date\"].dt.dayofweek + 1) / 7\n \"\"\"\n dataframe[\"%-day_of_week\"] = (dataframe[\"date\"].dt.dayofweek + 1) / 7\n dataframe[\"%-hour_of_day\"] = (dataframe[\"date\"].dt.hour + 1) / 25\n return dataframe\n\n def set_freqai_targets(self, dataframe: DataFrame, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n Required function to set the targets for the model.\n All targets must be prepended with `&` to be recognized by the FreqAI internals.\n\n :param df: strategy dataframe which will receive the targets\n usage example: dataframe[\"&-target\"] = dataframe[\"close\"].shift(-1) / dataframe[\"close\"]\n \"\"\"\n dataframe[\"&-s_close\"] = (\n dataframe[\"close\"]\n .shift(-self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .rolling(self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .mean()\n / dataframe[\"close\"]\n - 1\n )\n return dataframe\nNotice how the feature_engineering_*() is where features are added. Meanwhile set_freqai_targets() adds the labels/targets. A full example strategy is available in templates/FreqaiExampleStrategy.py.
Note
The self.freqai.start() function cannot be called outside the populate_indicators().
Note
Features must be defined in feature_engineering_*(). Defining FreqAI features in populate_indicators() will cause the algorithm to fail in live/dry mode. In order to add generalized features that are not associated with a specific pair or timeframe, you should use feature_engineering_standard() (as exemplified in freqtrade/templates/FreqaiExampleStrategy.py).
Below are the values you can expect to include/use inside a typical strategy dataframe (df[]):
df['&*'] Any dataframe column prepended with & in set_freqai_targets() is treated as a training target (label) inside FreqAI (typically following the naming convention &-s*). For example, to predict the close price 40 candles into the future, you would set df['&-s_close'] = df['close'].shift(-self.freqai_info[\"feature_parameters\"][\"label_period_candles\"]) with \"label_period_candles\": 40 in the config. FreqAI makes the predictions and gives them back under the same key (df['&-s_close']) to be used in populate_entry/exit_trend(). Datatype: Depends on the output of the model. df['&*_std/mean'] Standard deviation and mean values of the defined labels during training (or live tracking with fit_live_predictions_candles). Commonly used to understand the rarity of a prediction (use the z-score as shown in templates/FreqaiExampleStrategy.py and explained here to evaluate how often a particular prediction was observed during training or historically with fit_live_predictions_candles). Datatype: Float. df['do_predict'] Indication of an outlier data point. The return value is integer between -2 and 2, which lets you know if the prediction is trustworthy or not. do_predict==1 means that the prediction is trustworthy. If the Dissimilarity Index (DI, see details here) of the input data point is above the threshold defined in the config, FreqAI will subtract 1 from do_predict, resulting in do_predict==0. If use_SVM_to_remove_outliers is active, the Support Vector Machine (SVM, see details here) may also detect outliers in training and prediction data. In this case, the SVM will also subtract 1 from do_predict. If the input data point was considered an outlier by the SVM but not by the DI, or vice versa, the result will be do_predict==0. If both the DI and the SVM considers the input data point to be an outlier, the result will be do_predict==-1. As with the SVM, if use_DBSCAN_to_remove_outliers is active, DBSCAN (see details here) may also detect outliers and subtract 1 from do_predict. Hence, if both the SVM and DBSCAN are active and identify a datapoint that was above the DI threshold as an outlier, the result will be do_predict==-2. A particular case is when do_predict == 2, which means that the model has expired due to exceeding expired_hours. Datatype: Integer between -2 and 2. df['DI_values'] Dissimilarity Index (DI) values are proxies for the level of confidence FreqAI has in the prediction. A lower DI means the prediction is close to the training data, i.e., higher prediction confidence. See details about the DI here. Datatype: Float. df['%*'] Any dataframe column prepended with % in feature_engineering_*() is treated as a training feature. For example, you can include the RSI in the training feature set (similar to in templates/FreqaiExampleStrategy.py) by setting df['%-rsi']. See more details on how this is done here. Note: Since the number of features prepended with % can multiply very quickly (10s of thousands of features are easily engineered using the multiplictative functionality of, e.g., include_shifted_candles and include_timeframes as described in the parameter table), these features are removed from the dataframe that is returned from FreqAI to the strategy. To keep a particular type of feature for plotting purposes, you would prepend it with %% (see details below). Datatype: Depends on the feature created by the user. df['%%*'] Any dataframe column prepended with %% in feature_engineering_*() is treated as a training feature, just the same as the above % prepend. However, in this case, the features are returned back to the strategy for FreqUI/plot-dataframe plotting and monitoring in Dry/Live/Backtesting Datatype: Depends on the feature created by the user. Please note that features created in feature_engineering_expand() will have automatic FreqAI naming schemas depending on the expansions that you configured (i.e. include_timeframes, include_corr_pairlist, indicators_periods_candles, include_shifted_candles). So if you want to plot %%-rsi from feature_engineering_expand_all(), the final naming scheme for your plotting config would be: %%-rsi-period_10_ETH/USDT:USDT_1h for the rsi feature with period=10, timeframe=1h, and pair=ETH/USDT:USDT (the :USDT is added if you are using futures pairs). It is useful to simply add print(dataframe.columns) in your populate_indicators() after self.freqai.start() to see the full list of available features that are returned to the strategy for plotting purposes."},{"location":"freqai-configuration/#setting-the-startup_candle_count","title":"Setting the startup_candle_count","text":"The startup_candle_count in the FreqAI strategy needs to be set up in the same way as in the standard Freqtrade strategy (see details here). This value is used by Freqtrade to ensure that a sufficient amount of data is provided when calling the dataprovider, to avoid any NaNs at the beginning of the first training. You can easily set this value by identifying the longest period (in candle units) which is passed to the indicator creation functions (e.g., TA-Lib functions). In the presented example, startup_candle_count is 20 since this is the maximum value in indicators_periods_candles.
Note
There are instances where the TA-Lib functions actually require more data than just the passed period or else the feature dataset gets populated with NaNs. Anecdotally, multiplying the startup_candle_count by 2 always leads to a fully NaN free training dataset. Hence, it is typically safest to multiply the expected startup_candle_count by 2. Look out for this log message to confirm that the data is clean:
2022-08-31 15:14:04 - freqtrade.freqai.data_kitchen - INFO - dropped 0 training points due to NaNs in populated dataset 4319.\nDeciding when to enter or exit a trade can be done in a dynamic way to reflect current market conditions. FreqAI allows you to return additional information from the training of a model (more info here). For example, the &*_std/mean return values describe the statistical distribution of the target/label during the most recent training. Comparing a given prediction to these values allows you to know the rarity of the prediction. In templates/FreqaiExampleStrategy.py, the target_roi and sell_roi are defined to be 1.25 z-scores away from the mean which causes predictions that are closer to the mean to be filtered out.
dataframe[\"target_roi\"] = dataframe[\"&-s_close_mean\"] + dataframe[\"&-s_close_std\"] * 1.25\ndataframe[\"sell_roi\"] = dataframe[\"&-s_close_mean\"] - dataframe[\"&-s_close_std\"] * 1.25\nTo consider the population of historical predictions for creating the dynamic target instead of information from the training as discussed above, you would set fit_live_predictions_candles in the config to the number of historical prediction candles you wish to use to generate target statistics.
\"freqai\": {\n \"fit_live_predictions_candles\": 300,\n }\nIf this value is set, FreqAI will initially use the predictions from the training data and subsequently begin introducing real prediction data as it is generated. FreqAI will save this historical data to be reloaded if you stop and restart a model with the same identifier.
FreqAI has multiple example prediction model libraries that are ready to be used as is via the flag --freqaimodel. These libraries include CatBoost, LightGBM, and XGBoost regression, classification, and multi-target models, and can be found in freqai/prediction_models/.
Regression and classification models differ in what targets they predict - a regression model will predict a target of continuous values, for example what price BTC will be at tomorrow, whilst a classifier will predict a target of discrete values, for example if the price of BTC will go up tomorrow or not. This means that you have to specify your targets differently depending on which model type you are using (see details below).
All of the aforementioned model libraries implement gradient boosted decision tree algorithms. They all work on the principle of ensemble learning, where predictions from multiple simple learners are combined to get a final prediction that is more stable and generalized. The simple learners in this case are decision trees. Gradient boosting refers to the method of learning, where each simple learner is built in sequence - the subsequent learner is used to improve on the error from the previous learner. If you want to learn more about the different model libraries you can find the information in their respective docs:
There are also numerous online articles describing and comparing the algorithms. Some relatively lightweight examples would be CatBoost vs. LightGBM vs. XGBoost \u2014 Which is the best algorithm? and XGBoost, LightGBM or CatBoost \u2014 which boosting algorithm should I use?. Keep in mind that the performance of each model is highly dependent on the application and so any reported metrics might not be true for your particular use of the model.
Apart from the models already available in FreqAI, it is also possible to customize and create your own prediction models using the IFreqaiModel class. You are encouraged to inherit fit(), train(), and predict() to customize various aspects of the training procedures. You can place custom FreqAI models in user_data/freqaimodels - and freqtrade will pick them up from there based on the provided --freqaimodel name - which has to correspond to the class name of your custom model. Make sure to use unique names to avoid overriding built-in models.
If you are using a regressor, you need to specify a target that has continuous values. FreqAI includes a variety of regressors, such as the CatboostRegressorvia the flag --freqaimodel CatboostRegressor. An example of how you could set a regression target for predicting the price 100 candles into the future would be
df['&s-close_price'] = df['close'].shift(-100)\nIf you want to predict multiple targets, you need to define multiple labels using the same syntax as shown above.
"},{"location":"freqai-configuration/#classifiers","title":"Classifiers","text":"If you are using a classifier, you need to specify a target that has discrete values. FreqAI includes a variety of classifiers, such as the CatboostClassifier via the flag --freqaimodel CatboostClassifier. If you elects to use a classifier, the classes need to be set using strings. For example, if you want to predict if the price 100 candles into the future goes up or down you would set
df['&s-up_or_down'] = np.where( df[\"close\"].shift(-100) > df[\"close\"], 'up', 'down')\nIf you want to predict multiple targets you must specify all labels in the same label column. You could, for example, add the label same to define where the price was unchanged by setting
df['&s-up_or_down'] = np.where( df[\"close\"].shift(-100) > df[\"close\"], 'up', 'down')\ndf['&s-up_or_down'] = np.where( df[\"close\"].shift(-100) == df[\"close\"], 'same', df['&s-up_or_down'])\nThe easiest way to quickly run a pytorch model is with the following command (for regression task):
freqtrade trade --config config_examples/config_freqai.example.json --strategy FreqaiExampleStrategy --freqaimodel PyTorchMLPRegressor --strategy-path freqtrade/templates \nInstallation/docker
The PyTorch module requires large packages such as torch, which should be explicitly requested during ./setup.sh -i by answering \"y\" to the question \"Do you also want dependencies for freqai-rl or PyTorch (~700mb additional space required) [y/N]?\". Users who prefer docker should ensure they use the docker image appended with _freqaitorch. We do provide an explicit docker-compose file for this in docker/docker-compose-freqai.yml - which can be used via docker compose -f docker/docker-compose-freqai.yml run ... - or can be copied to replace the original docker file. This docker-compose file also contains a (disabled) section to enable GPU resources within docker containers. This obviously assumes the system has GPU resources available.
PyTorch dropped support for macOS x64 (intel based Apple devices) in version 2.3. Subsequently, freqtrade also dropped support for PyTorch on this platform.
"},{"location":"freqai-configuration/#structure","title":"Structure","text":""},{"location":"freqai-configuration/#model","title":"Model","text":"You can construct your own Neural Network architecture in PyTorch by simply defining your nn.Module class inside your custom IFreqaiModel file and then using that class in your def train() function. Here is an example of logistic regression model implementation using PyTorch (should be used with nn.BCELoss criterion) for classification tasks.
class LogisticRegression(nn.Module):\n def __init__(self, input_size: int):\n super().__init__()\n # Define your layers\n self.linear = nn.Linear(input_size, 1)\n self.activation = nn.Sigmoid()\n\n def forward(self, x: torch.Tensor) -> torch.Tensor:\n # Define the forward pass\n out = self.linear(x)\n out = self.activation(out)\n return out\n\nclass MyCoolPyTorchClassifier(BasePyTorchClassifier):\n \"\"\"\n This is a custom IFreqaiModel showing how a user might setup their own \n custom Neural Network architecture for their training.\n \"\"\"\n\n @property\n def data_convertor(self) -> PyTorchDataConvertor:\n return DefaultPyTorchDataConvertor(target_tensor_type=torch.float)\n\n def __init__(self, **kwargs) -> None:\n super().__init__(**kwargs)\n config = self.freqai_info.get(\"model_training_parameters\", {})\n self.learning_rate: float = config.get(\"learning_rate\", 3e-4)\n self.model_kwargs: dict[str, Any] = config.get(\"model_kwargs\", {})\n self.trainer_kwargs: dict[str, Any] = config.get(\"trainer_kwargs\", {})\n\n def fit(self, data_dictionary: dict, dk: FreqaiDataKitchen, **kwargs) -> Any:\n \"\"\"\n User sets up the training and test data to fit their desired model here\n :param data_dictionary: the dictionary holding all data for train, test,\n labels, weights\n :param dk: The datakitchen object for the current coin/model\n \"\"\"\n\n class_names = self.get_class_names()\n self.convert_label_column_to_int(data_dictionary, dk, class_names)\n n_features = data_dictionary[\"train_features\"].shape[-1]\n model = LogisticRegression(\n input_dim=n_features\n )\n model.to(self.device)\n optimizer = torch.optim.AdamW(model.parameters(), lr=self.learning_rate)\n criterion = torch.nn.CrossEntropyLoss()\n init_model = self.get_init_model(dk.pair)\n trainer = PyTorchModelTrainer(\n model=model,\n optimizer=optimizer,\n criterion=criterion,\n model_meta_data={\"class_names\": class_names},\n device=self.device,\n init_model=init_model,\n data_convertor=self.data_convertor,\n **self.trainer_kwargs,\n )\n trainer.fit(data_dictionary, self.splits)\n return trainer\nThe PyTorchModelTrainer performs the idiomatic PyTorch train loop: Define our model, loss function, and optimizer, and then move them to the appropriate device (GPU or CPU). Inside the loop, we iterate through the batches in the dataloader, move the data to the device, compute the prediction and loss, backpropagate, and update the model parameters using the optimizer.
In addition, the trainer is responsible for the following: - saving and loading the model - converting the data from pandas.DataFrame to torch.Tensor.
Like all freqai models, PyTorch models inherit IFreqaiModel. IFreqaiModel declares three abstract methods: train, fit, and predict. we implement these methods in three levels of hierarchy. From top to bottom:
BasePyTorchModel - Implements the train method. all BasePyTorch* inherit it. responsible for general data preparation (e.g., data normalization) and calling the fit method. Sets device attribute used by children classes. Sets model_type attribute used by the parent class.BasePyTorch* - Implements the predict method. Here, the * represents a group of algorithms, such as classifiers or regressors. responsible for data preprocessing, predicting, and postprocessing if needed.PyTorch*Classifier / PyTorch*Regressor - implements the fit method. responsible for the main train flaw, where we initialize the trainer and model objects.Building a PyTorch regressor using MLP (multilayer perceptron) model, MSELoss criterion, and AdamW optimizer.
class PyTorchMLPRegressor(BasePyTorchRegressor):\n def __init__(self, **kwargs) -> None:\n super().__init__(**kwargs)\n config = self.freqai_info.get(\"model_training_parameters\", {})\n self.learning_rate: float = config.get(\"learning_rate\", 3e-4)\n self.model_kwargs: dict[str, Any] = config.get(\"model_kwargs\", {})\n self.trainer_kwargs: dict[str, Any] = config.get(\"trainer_kwargs\", {})\n\n def fit(self, data_dictionary: dict, dk: FreqaiDataKitchen, **kwargs) -> Any:\n n_features = data_dictionary[\"train_features\"].shape[-1]\n model = PyTorchMLPModel(\n input_dim=n_features,\n output_dim=1,\n **self.model_kwargs\n )\n model.to(self.device)\n optimizer = torch.optim.AdamW(model.parameters(), lr=self.learning_rate)\n criterion = torch.nn.MSELoss()\n init_model = self.get_init_model(dk.pair)\n trainer = PyTorchModelTrainer(\n model=model,\n optimizer=optimizer,\n criterion=criterion,\n device=self.device,\n init_model=init_model,\n target_tensor_type=torch.float,\n **self.trainer_kwargs,\n )\n trainer.fit(data_dictionary)\n return trainer\nHere we create a PyTorchMLPRegressor class that implements the fit method. The fit method specifies the training building blocks: model, optimizer, criterion, and trainer. We inherit both BasePyTorchRegressor and BasePyTorchModel, where the former implements the predict method that is suitable for our regression task, and the latter implements the train method.
When using classifiers, the user must declare the class names (or targets) by overriding the IFreqaiModel.class_names attribute. This is achieved by setting self.freqai.class_names in the FreqAI strategy inside the set_freqai_targets method.
For example, if you are using a binary classifier to predict price movements as up or down, you can set the class names as follows:
def set_freqai_targets(self, dataframe: DataFrame, metadata: dict, **kwargs) -> DataFrame:\n self.freqai.class_names = [\"down\", \"up\"]\n dataframe['&s-up_or_down'] = np.where(dataframe[\"close\"].shift(-100) >\n dataframe[\"close\"], 'up', 'down')\n\n return dataframe\ntorch.compile()","text":"Torch provides a torch.compile() method that can be used to improve performance for specific GPU hardware. More details can be found here. In brief, you simply wrap your model in torch.compile():
model = PyTorchMLPModel(\n input_dim=n_features,\n output_dim=1,\n **self.model_kwargs\n )\n model.to(self.device)\n model = torch.compile(model)\nThen proceed to use the model as normal. Keep in mind that doing this will remove eager execution, which means errors and tracebacks will not be informative.
"},{"location":"freqai-developers/","title":"Development","text":""},{"location":"freqai-developers/#project-architecture","title":"Project architecture","text":"The architecture and functions of FreqAI are generalized to encourages development of unique features, functions, models, etc.
The class structure and a detailed algorithmic overview is depicted in the following diagram:
As shown, there are three distinct objects comprising FreqAI:
There are a variety of built-in prediction models which inherit directly from IFreqaiModel. Each of these models have full access to all methods in IFreqaiModel and can therefore override any of those functions at will. However, advanced users will likely stick to overriding fit(), train(), predict(), and data_cleaning_train/predict().
FreqAI aims to organize model files, prediction data, and meta data in a way that simplifies post-processing and enhances crash resilience by automatic data reloading. The data is saved in a file structure,user_data_dir/models/, which contains all the data associated with the trainings and backtests. The FreqaiDataKitchen() relies heavily on the file structure for proper training and inferencing and should therefore not be manually modified.
The file structure is automatically generated based on the model identifier set in the config. The following structure shows where the data is stored for post processing:
config_*.json A copy of the model specific configuration file. historic_predictions.pkl A file containing all historic predictions generated during the lifetime of the identifier model during live deployment. historic_predictions.pkl is used to reload the model after a crash or a config change. A backup file is always held in case of corruption on the main file. FreqAI automatically detects corruption and replaces the corrupted file with the backup. pair_dictionary.json A file containing the training queue as well as the on disk location of the most recently trained model. sub-train-*_TIMESTAMP A folder containing all the files associated with a single model, such as: *_metadata.json - Metadata for the model, such as normalization max/min, expected training feature list, etc. *_model.* - The model file saved to disk for reloading from a crash. Can be joblib (typical boosting libs), zip (stable_baselines), hd5 (keras type), etc. *_pca_object.pkl - The Principal component analysis (PCA) transform (if principal_component_analysis: True is set in the config) which will be used to transform unseen prediction features. *_svm_model.pkl - The Support Vector Machine (SVM) model (if use_SVM_to_remove_outliers: True is set in the config) which is used to detect outliers in unseen prediction features. *_trained_df.pkl - The dataframe containing all the training features used to train the identifier model. This is used for computing the Dissimilarity Index (DI) and can also be used for post-processing. *_trained_dates.df.pkl - The dates associated with the trained_df.pkl, which is useful for post-processing. The example file structure would look like this:
\u251c\u2500\u2500 models\n\u2502\u00a0\u00a0 \u2514\u2500\u2500 unique-id\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 config_freqai.example.json\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 historic_predictions.backup.pkl\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 historic_predictions.pkl\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 pair_dictionary.json\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 sub-train-1INCH_1662821319\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821319_metadata.json\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821319_model.joblib\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821319_pca_object.pkl\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821319_svm_model.joblib\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821319_trained_dates_df.pkl\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u2514\u2500\u2500 cb_1inch_1662821319_trained_df.pkl\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 sub-train-1INCH_1662821371\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821371_metadata.json\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821371_model.joblib\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821371_pca_object.pkl\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821371_svm_model.joblib\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821371_trained_dates_df.pkl\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u2514\u2500\u2500 cb_1inch_1662821371_trained_df.pkl\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 sub-train-ADA_1662821344\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821344_metadata.json\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821344_model.joblib\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821344_pca_object.pkl\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821344_svm_model.joblib\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821344_trained_dates_df.pkl\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u2514\u2500\u2500 cb_ada_1662821344_trained_df.pkl\n\u2502\u00a0\u00a0 \u2514\u2500\u2500 sub-train-ADA_1662821399\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821399_metadata.json\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821399_model.joblib\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821399_pca_object.pkl\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821399_svm_model.joblib\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821399_trained_dates_df.pkl\n\u2502\u00a0\u00a0 \u2514\u2500\u2500 cb_ada_1662821399_trained_df.pkl\nLow level feature engineering is performed in the user strategy within a set of functions called feature_engineering_*. These function set the base features such as, RSI, MFI, EMA, SMA, time of day, volume, etc. The base features can be custom indicators or they can be imported from any technical-analysis library that you can find. FreqAI is equipped with a set of functions to simplify rapid large-scale feature engineering:
feature_engineering_expand_all() This optional function will automatically expand the defined features on the config defined indicator_periods_candles, include_timeframes, include_shifted_candles, and include_corr_pairs. feature_engineering_expand_basic() This optional function will automatically expand the defined features on the config defined include_timeframes, include_shifted_candles, and include_corr_pairs. Note: this function does not expand across indicator_periods_candles. feature_engineering_standard() This optional function will be called once with the dataframe of the base timeframe. This is the final function to be called, which means that the dataframe entering this function will contain all the features and columns from the base asset created by the other feature_engineering_expand functions. This function is a good place to do custom exotic feature extractions (e.g. tsfresh). This function is also a good place for any feature that should not be auto-expanded upon (e.g., day of the week). set_freqai_targets() Required function to set the targets for the model. All targets must be prepended with & to be recognized by the FreqAI internals. Meanwhile, high level feature engineering is handled within \"feature_parameters\":{} in the FreqAI config. Within this file, it is possible to decide large scale feature expansions on top of the base_features such as \"including correlated pairs\" or \"including informative timeframes\" or even \"including recent candles.\"
It is advisable to start from the template feature_engineering_* functions in the source provided example strategy (found in templates/FreqaiExampleStrategy.py) to ensure that the feature definitions are following the correct conventions. Here is an example of how to set the indicators and labels in the strategy:
def feature_engineering_expand_all(self, dataframe: DataFrame, period, metadata, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This function will automatically expand the defined features on the config defined\n `indicator_periods_candles`, `include_timeframes`, `include_shifted_candles`, and\n `include_corr_pairs`. In other words, a single feature defined in this function\n will automatically expand to a total of\n `indicator_periods_candles` * `include_timeframes` * `include_shifted_candles` *\n `include_corr_pairs` numbers of features added to the model.\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n Access metadata such as the current pair/timeframe/period with:\n\n `metadata[\"pair\"]` `metadata[\"tf\"]` `metadata[\"period\"]`\n\n :param df: strategy dataframe which will receive the features\n :param period: period of the indicator - usage example:\n :param metadata: metadata of current pair\n dataframe[\"%-ema-period\"] = ta.EMA(dataframe, timeperiod=period)\n \"\"\"\n\n dataframe[\"%-rsi-period\"] = ta.RSI(dataframe, timeperiod=period)\n dataframe[\"%-mfi-period\"] = ta.MFI(dataframe, timeperiod=period)\n dataframe[\"%-adx-period\"] = ta.ADX(dataframe, timeperiod=period)\n dataframe[\"%-sma-period\"] = ta.SMA(dataframe, timeperiod=period)\n dataframe[\"%-ema-period\"] = ta.EMA(dataframe, timeperiod=period)\n\n bollinger = qtpylib.bollinger_bands(\n qtpylib.typical_price(dataframe), window=period, stds=2.2\n )\n dataframe[\"bb_lowerband-period\"] = bollinger[\"lower\"]\n dataframe[\"bb_middleband-period\"] = bollinger[\"mid\"]\n dataframe[\"bb_upperband-period\"] = bollinger[\"upper\"]\n\n dataframe[\"%-bb_width-period\"] = (\n dataframe[\"bb_upperband-period\"]\n - dataframe[\"bb_lowerband-period\"]\n ) / dataframe[\"bb_middleband-period\"]\n dataframe[\"%-close-bb_lower-period\"] = (\n dataframe[\"close\"] / dataframe[\"bb_lowerband-period\"]\n )\n\n dataframe[\"%-roc-period\"] = ta.ROC(dataframe, timeperiod=period)\n\n dataframe[\"%-relative_volume-period\"] = (\n dataframe[\"volume\"] / dataframe[\"volume\"].rolling(period).mean()\n )\n\n return dataframe\n\n def feature_engineering_expand_basic(self, dataframe: DataFrame, metadata, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This function will automatically expand the defined features on the config defined\n `include_timeframes`, `include_shifted_candles`, and `include_corr_pairs`.\n In other words, a single feature defined in this function\n will automatically expand to a total of\n `include_timeframes` * `include_shifted_candles` * `include_corr_pairs`\n numbers of features added to the model.\n\n Features defined here will *not* be automatically duplicated on user defined\n `indicator_periods_candles`\n\n Access metadata such as the current pair/timeframe with:\n\n `metadata[\"pair\"]` `metadata[\"tf\"]`\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n :param df: strategy dataframe which will receive the features\n :param metadata: metadata of current pair\n dataframe[\"%-pct-change\"] = dataframe[\"close\"].pct_change()\n dataframe[\"%-ema-200\"] = ta.EMA(dataframe, timeperiod=200)\n \"\"\"\n dataframe[\"%-pct-change\"] = dataframe[\"close\"].pct_change()\n dataframe[\"%-raw_volume\"] = dataframe[\"volume\"]\n dataframe[\"%-raw_price\"] = dataframe[\"close\"]\n return dataframe\n\n def feature_engineering_standard(self, dataframe: DataFrame, metadata, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This optional function will be called once with the dataframe of the base timeframe.\n This is the final function to be called, which means that the dataframe entering this\n function will contain all the features and columns created by all other\n freqai_feature_engineering_* functions.\n\n This function is a good place to do custom exotic feature extractions (e.g. tsfresh).\n This function is a good place for any feature that should not be auto-expanded upon\n (e.g. day of the week).\n\n Access metadata such as the current pair with:\n\n `metadata[\"pair\"]`\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n :param df: strategy dataframe which will receive the features\n :param metadata: metadata of current pair\n usage example: dataframe[\"%-day_of_week\"] = (dataframe[\"date\"].dt.dayofweek + 1) / 7\n \"\"\"\n dataframe[\"%-day_of_week\"] = (dataframe[\"date\"].dt.dayofweek + 1) / 7\n dataframe[\"%-hour_of_day\"] = (dataframe[\"date\"].dt.hour + 1) / 25\n return dataframe\n\n def set_freqai_targets(self, dataframe: DataFrame, metadata, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n Required function to set the targets for the model.\n All targets must be prepended with `&` to be recognized by the FreqAI internals.\n\n Access metadata such as the current pair with:\n\n `metadata[\"pair\"]`\n\n :param df: strategy dataframe which will receive the targets\n :param metadata: metadata of current pair\n usage example: dataframe[\"&-target\"] = dataframe[\"close\"].shift(-1) / dataframe[\"close\"]\n \"\"\"\n dataframe[\"&-s_close\"] = (\n dataframe[\"close\"]\n .shift(-self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .rolling(self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .mean()\n / dataframe[\"close\"]\n - 1\n )\n\n return dataframe\nIn the presented example, the user does not wish to pass the bb_lowerband as a feature to the model, and has therefore not prepended it with %. The user does, however, wish to pass bb_width to the model for training/prediction and has therefore prepended it with %.
After having defined the base features, the next step is to expand upon them using the powerful feature_parameters in the configuration file:
\"freqai\": {\n //...\n \"feature_parameters\" : {\n \"include_timeframes\": [\"5m\",\"15m\",\"4h\"],\n \"include_corr_pairlist\": [\n \"ETH/USD\",\n \"LINK/USD\",\n \"BNB/USD\"\n ],\n \"label_period_candles\": 24,\n \"include_shifted_candles\": 2,\n \"indicator_periods_candles\": [10, 20]\n },\n //...\n }\nThe include_timeframes in the config above are the timeframes (tf) of each call to feature_engineering_expand_*() in the strategy. In the presented case, the user is asking for the 5m, 15m, and 4h timeframes of the rsi, mfi, roc, and bb_width to be included in the feature set.
You can ask for each of the defined features to be included also for informative pairs using the include_corr_pairlist. This means that the feature set will include all the features from feature_engineering_expand_*() on all the include_timeframes for each of the correlated pairs defined in the config (ETH/USD, LINK/USD, and BNB/USD in the presented example).
include_shifted_candles indicates the number of previous candles to include in the feature set. For example, include_shifted_candles: 2 tells FreqAI to include the past 2 candles for each of the features in the feature set.
In total, the number of features the user of the presented example strategy has created is: length of include_timeframes * no. features in feature_engineering_expand_*() * length of include_corr_pairlist * no. include_shifted_candles * length of indicator_periods_candles \\(= 3 * 3 * 3 * 2 * 2 = 108\\).
Learn more about creative feature engineering
Check out our medium article geared toward helping users learn how to creatively engineer features.
"},{"location":"freqai-feature-engineering/#gain-finer-control-over-feature_engineering_-functions-with-metadata","title":"Gain finer control overfeature_engineering_* functions with metadata","text":"All feature_engineering_* and set_freqai_targets() functions are passed a metadata dictionary which contains information about the pair, tf (timeframe), and period that FreqAI is automating for feature building. As such, a user can use metadata inside feature_engineering_* functions as criteria for blocking/reserving features for certain timeframes, periods, pairs etc.
def feature_engineering_expand_all(self, dataframe: DataFrame, period, metadata, **kwargs) -> DataFrame:\n if metadata[\"tf\"] == \"1h\":\n dataframe[\"%-roc-period\"] = ta.ROC(dataframe, timeperiod=period)\nThis will block ta.ROC() from being added to any timeframes other than \"1h\".
Important metrics can be returned to the strategy at the end of each model training by assigning them to dk.data['extra_returns_per_train']['my_new_value'] = XYZ inside the custom prediction model class.
FreqAI takes the my_new_value assigned in this dictionary and expands it to fit the dataframe that is returned to the strategy. You can then use the returned metrics in your strategy through dataframe['my_new_value']. An example of how return values can be used in FreqAI are the &*_mean and &*_std values that are used to created a dynamic target threshold.
Another example, where the user wants to use live metrics from the trade database, is shown below:
\"freqai\": {\n \"extra_returns_per_train\": {\"total_profit\": 4}\n }\nYou need to set the standard dictionary in the config so that FreqAI can return proper dataframe shapes. These values will likely be overridden by the prediction model, but in the case where the model has yet to set them, or needs a default initial value, the pre-set values are what will be returned.
"},{"location":"freqai-feature-engineering/#weighting-features-for-temporal-importance","title":"Weighting features for temporal importance","text":"FreqAI allows you to set a weight_factor to weight recent data more strongly than past data via an exponential function:
where \\(W_i\\) is the weight of data point \\(i\\) in a total set of \\(n\\) data points. Below is a figure showing the effect of different weight factors on the data points in a feature set.
"},{"location":"freqai-feature-engineering/#building-the-data-pipeline","title":"Building the data pipeline","text":"By default, FreqAI builds a dynamic pipeline based on user configuration settings. The default settings are robust and designed to work with a variety of methods. These two steps are a MinMaxScaler(-1,1) and a VarianceThreshold which removes any column that has 0 variance. Users can activate other steps with more configuration parameters. For example if users add use_SVM_to_remove_outliers: true to the freqai config, then FreqAI will automatically add the SVMOutlierExtractor to the pipeline. Likewise, users can add principal_component_analysis: true to the freqai config to activate PCA. The DissimilarityIndex is activated with DI_threshold: 1. Finally, noise can also be added to the data with noise_standard_deviation: 0.1. Finally, users can add DBSCAN outlier removal with use_DBSCAN_to_remove_outliers: true.
More information available
Please review the parameter table for more information on these parameters.
"},{"location":"freqai-feature-engineering/#customizing-the-pipeline","title":"Customizing the pipeline","text":"Users are encouraged to customize the data pipeline to their needs by building their own data pipeline. This can be done by simply setting dk.feature_pipeline to their desired Pipeline object inside their IFreqaiModel train() function, or if they prefer not to touch the train() function, they can override define_data_pipeline/define_label_pipeline functions in their IFreqaiModel:
More information available
FreqAI uses the DataSieve pipeline, which follows the SKlearn pipeline API, but adds, among other features, coherence between the X, y, and sample_weight vector point removals, feature removal, feature name following.
from datasieve.transforms import SKLearnWrapper, DissimilarityIndex\nfrom datasieve.pipeline import Pipeline\nfrom sklearn.preprocessing import QuantileTransformer, StandardScaler\nfrom freqai.base_models import BaseRegressionModel\n\n\nclass MyFreqaiModel(BaseRegressionModel):\n \"\"\"\n Some cool custom model\n \"\"\"\n def fit(self, data_dictionary: Dict, dk: FreqaiDataKitchen, **kwargs) -> Any:\n \"\"\"\n My custom fit function\n \"\"\"\n model = cool_model.fit()\n return model\n\n def define_data_pipeline(self) -> Pipeline:\n \"\"\"\n User defines their custom feature pipeline here (if they wish)\n \"\"\"\n feature_pipeline = Pipeline([\n ('qt', SKLearnWrapper(QuantileTransformer(output_distribution='normal'))),\n ('di', ds.DissimilarityIndex(di_threshold=1))\n ])\n\n return feature_pipeline\n\n def define_label_pipeline(self) -> Pipeline:\n \"\"\"\n User defines their custom label pipeline here (if they wish)\n \"\"\"\n label_pipeline = Pipeline([\n ('qt', SKLearnWrapper(StandardScaler())),\n ])\n\n return label_pipeline\nHere, you are defining the exact pipeline that will be used for your feature set during training and prediction. You can use most SKLearn transformation steps by wrapping them in the SKLearnWrapper class as shown above. In addition, you can use any of the transformations available in the DataSieve library.
You can easily add your own transformation by creating a class that inherits from the datasieve BaseTransform and implementing your fit(), transform() and inverse_transform() methods:
from datasieve.transforms.base_transform import BaseTransform\n# import whatever else you need\n\nclass MyCoolTransform(BaseTransform):\n def __init__(self, **kwargs):\n self.param1 = kwargs.get('param1', 1)\n\n def fit(self, X, y=None, sample_weight=None, feature_list=None, **kwargs):\n # do something with X, y, sample_weight, or/and feature_list\n return X, y, sample_weight, feature_list\n\n def transform(self, X, y=None, sample_weight=None,\n feature_list=None, outlier_check=False, **kwargs):\n # do something with X, y, sample_weight, or/and feature_list\n return X, y, sample_weight, feature_list\n\n def inverse_transform(self, X, y=None, sample_weight=None, feature_list=None, **kwargs):\n # do/dont do something with X, y, sample_weight, or/and feature_list\n return X, y, sample_weight, feature_list\nHint
You can define this custom class in the same file as your IFreqaiModel.
IFreqaiModel to the new Pipeline","text":"If you have created your own custom IFreqaiModel with a custom train()/predict() function, and you still rely on data_cleaning_train/predict(), then you will need to migrate to the new pipeline. If your model does not rely on data_cleaning_train/predict(), then you do not need to worry about this migration.
More details about the migration can be found here.
"},{"location":"freqai-feature-engineering/#outlier-detection","title":"Outlier detection","text":"Equity and crypto markets suffer from a high level of non-patterned noise in the form of outlier data points. FreqAI implements a variety of methods to identify such outliers and hence mitigate risk.
"},{"location":"freqai-feature-engineering/#identifying-outliers-with-the-dissimilarity-index-di","title":"Identifying outliers with the Dissimilarity Index (DI)","text":"The Dissimilarity Index (DI) aims to quantify the uncertainty associated with each prediction made by the model.
You can tell FreqAI to remove outlier data points from the training/test data sets using the DI by including the following statement in the config:
\"freqai\": {\n \"feature_parameters\" : {\n \"DI_threshold\": 1\n }\n }\nWhich will add DissimilarityIndex step to your feature_pipeline and set the threshold to 1. The DI allows predictions which are outliers (not existent in the model feature space) to be thrown out due to low levels of certainty. To do so, FreqAI measures the distance between each training data point (feature vector), \\(X_{a}\\), and all other training data points:
where \\(d_{ab}\\) is the distance between the normalized points \\(a\\) and \\(b\\), and \\(p\\) is the number of features, i.e., the length of the vector \\(X\\). The characteristic distance, \\(\\overline{d}\\), for a set of training data points is simply the mean of the average distances:
\\[ \\overline{d} = \\sum_{a=1}^n(\\sum_{b=1}^n(d_{ab}/n)/n) \\]\\(\\overline{d}\\) quantifies the spread of the training data, which is compared to the distance between a new prediction feature vectors, \\(X_k\\) and all the training data:
\\[ d_k = \\arg \\min d_{k,i} \\]This enables the estimation of the Dissimilarity Index as:
\\[ DI_k = d_k/\\overline{d} \\]You can tweak the DI through the DI_threshold to increase or decrease the extrapolation of the trained model. A higher DI_threshold means that the DI is more lenient and allows predictions further away from the training data to be used whilst a lower DI_threshold has the opposite effect and hence discards more predictions.
Below is a figure that describes the DI for a 3D data set.
"},{"location":"freqai-feature-engineering/#identifying-outliers-using-a-support-vector-machine-svm","title":"Identifying outliers using a Support Vector Machine (SVM)","text":"You can tell FreqAI to remove outlier data points from the training/test data sets using a Support Vector Machine (SVM) by including the following statement in the config:
\"freqai\": {\n \"feature_parameters\" : {\n \"use_SVM_to_remove_outliers\": true\n }\n }\nWhich will add SVMOutlierExtractor step to your feature_pipeline. The SVM will be trained on the training data and any data point that the SVM deems to be beyond the feature space will be removed.
You can elect to provide additional parameters for the SVM, such as shuffle, and nu via the feature_parameters.svm_params dictionary in the config.
The parameter shuffle is by default set to False to ensure consistent results. If it is set to True, running the SVM multiple times on the same data set might result in different outcomes due to max_iter being to low for the algorithm to reach the demanded tol. Increasing max_iter solves this issue but causes the procedure to take longer time.
The parameter nu, very broadly, is the amount of data points that should be considered outliers and should be between 0 and 1.
You can configure FreqAI to use DBSCAN to cluster and remove outliers from the training/test data set or incoming outliers from predictions, by activating use_DBSCAN_to_remove_outliers in the config:
\"freqai\": {\n \"feature_parameters\" : {\n \"use_DBSCAN_to_remove_outliers\": true\n }\n }\nWhich will add the DataSieveDBSCAN step to your feature_pipeline. This is an unsupervised machine learning algorithm that clusters data without needing to know how many clusters there should be.
Given a number of data points \\(N\\), and a distance \\(\\varepsilon\\), DBSCAN clusters the data set by setting all data points that have \\(N-1\\) other data points within a distance of \\(\\varepsilon\\) as core points. A data point that is within a distance of \\(\\varepsilon\\) from a core point but that does not have \\(N-1\\) other data points within a distance of \\(\\varepsilon\\) from itself is considered an edge point. A cluster is then the collection of core points and edge points. Data points that have no other data points at a distance \\(<\\varepsilon\\) are considered outliers. The figure below shows a cluster with \\(N = 3\\).
FreqAI uses sklearn.cluster.DBSCAN (details are available on scikit-learn's webpage here (external website)) with min_samples (\\(N\\)) taken as \u00bc of the no. of time points (candles) in the feature set. eps (\\(\\varepsilon\\)) is computed automatically as the elbow point in the k-distance graph computed from the nearest neighbors in the pairwise distances of all data points in the feature set.
You can reduce the dimensionality of your features by activating the principal_component_analysis in the config:
\"freqai\": {\n \"feature_parameters\" : {\n \"principal_component_analysis\": true\n }\n }\nThis will perform PCA on the features and reduce their dimensionality so that the explained variance of the data set is >= 0.999. Reducing data dimensionality makes training the model faster and hence allows for more up-to-date models.
"},{"location":"freqai-parameter-table/","title":"Parameter table","text":"The table below will list all configuration parameters available for FreqAI. Some of the parameters are exemplified in config_examples/config_freqai.example.json.
Mandatory parameters are marked as Required and have to be set in one of the suggested ways.
"},{"location":"freqai-parameter-table/#general-configuration-parameters","title":"General configuration parameters","text":"Parameter Description General configuration parameters within theconfig.freqai tree freqai Required. The parent dictionary containing all the parameters for controlling FreqAI. Datatype: Dictionary. train_period_days Required. Number of days to use for the training data (width of the sliding window). Datatype: Positive integer. backtest_period_days Required. Number of days to inference from the trained model before sliding the train_period_days window defined above, and retraining the model during backtesting (more info here). This can be fractional days, but beware that the provided timerange will be divided by this number to yield the number of trainings necessary to complete the backtest. Datatype: Float. identifier Required. A unique ID for the current model. If models are saved to disk, the identifier allows for reloading specific pre-trained models/data. Datatype: String. live_retrain_hours Frequency of retraining during dry/live runs. Datatype: Float > 0. Default: 0 (models retrain as often as possible). expiration_hours Avoid making predictions if a model is more than expiration_hours old. Datatype: Positive integer. Default: 0 (models never expire). purge_old_models Number of models to keep on disk (not relevant to backtesting). Default is 2, which means that dry/live runs will keep the latest 2 models on disk. Setting to 0 keeps all models. This parameter also accepts a boolean to maintain backwards compatibility. Datatype: Integer. Default: 2. save_backtest_models Save models to disk when running backtesting. Backtesting operates most efficiently by saving the prediction data and reusing them directly for subsequent runs (when you wish to tune entry/exit parameters). Saving backtesting models to disk also allows to use the same model files for starting a dry/live instance with the same model identifier. Datatype: Boolean. Default: False (no models are saved). fit_live_predictions_candles Number of historical candles to use for computing target (label) statistics from prediction data, instead of from the training dataset (more information can be found here). Datatype: Positive integer. continual_learning Use the final state of the most recently trained model as starting point for the new model, allowing for incremental learning (more information can be found here). Beware that this is currently a naive approach to incremental learning, and it has a high probability of overfitting/getting stuck in local minima while the market moves away from your model. We have the connections here primarily for experimental purposes and so that it is ready for more mature approaches to continual learning in chaotic systems like the crypto market. Datatype: Boolean. Default: False. write_metrics_to_disk Collect train timings, inference timings and cpu usage in json file. Datatype: Boolean. Default: False data_kitchen_thread_count Designate the number of threads you want to use for data processing (outlier methods, normalization, etc.). This has no impact on the number of threads used for training. If user does not set it (default), FreqAI will use max number of threads - 2 (leaving 1 physical core available for Freqtrade bot and FreqUI) Datatype: Positive integer. activate_tensorboard Indicate whether or not to activate tensorboard for the tensorboard enabled modules (currently Reinforcment Learning, XGBoost, Catboost, and PyTorch). Tensorboard needs Torch installed, which means you will need the torch/RL docker image or you need to answer \"yes\" to the install question about whether or not you wish to install Torch. Datatype: Boolean. Default: True. wait_for_training_iteration_on_reload When using /reload or ctrl-c, wait for the current training iteration to finish before completing graceful shutdown. If set to False, FreqAI will break the current training iteration, allowing you to shutdown gracefully more quickly, but you will lose your current training iteration. Datatype: Boolean. Default: True."},{"location":"freqai-parameter-table/#feature-parameters","title":"Feature parameters","text":"Parameter Description Feature parameters within the freqai.feature_parameters sub dictionary feature_parameters A dictionary containing the parameters used to engineer the feature set. Details and examples are shown here. Datatype: Dictionary. include_timeframes A list of timeframes that all indicators in feature_engineering_expand_*() will be created for. The list is added as features to the base indicators dataset. Datatype: List of timeframes (strings). include_corr_pairlist A list of correlated coins that FreqAI will add as additional features to all pair_whitelist coins. All indicators set in feature_engineering_expand_*() during feature engineering (see details here) will be created for each correlated coin. The correlated coins features are added to the base indicators dataset. Datatype: List of assets (strings). label_period_candles Number of candles into the future that the labels are created for. This can be used in set_freqai_targets() (see templates/FreqaiExampleStrategy.py for detailed usage). This parameter is not necessarily required, you can create custom labels and choose whether to make use of this parameter or not. Please see templates/FreqaiExampleStrategy.py to see the example usage. Datatype: Positive integer. include_shifted_candles Add features from previous candles to subsequent candles with the intent of adding historical information. If used, FreqAI will duplicate and shift all features from the include_shifted_candles previous candles so that the information is available for the subsequent candle. Datatype: Positive integer. weight_factor Weight training data points according to their recency (see details here). Datatype: Positive float (typically < 1). indicator_max_period_candles No longer used (#7325). Replaced by startup_candle_count which is set in the strategy. startup_candle_count is timeframe independent and defines the maximum period used in feature_engineering_*() for indicator creation. FreqAI uses this parameter together with the maximum timeframe in include_time_frames to calculate how many data points to download such that the first data point does not include a NaN. Datatype: Positive integer. indicator_periods_candles Time periods to calculate indicators for. The indicators are added to the base indicator dataset. Datatype: List of positive integers. principal_component_analysis Automatically reduce the dimensionality of the data set using Principal Component Analysis. See details about how it works here Datatype: Boolean. Default: False. plot_feature_importances Create a feature importance plot for each model for the top/bottom plot_feature_importances number of features. Plot is stored in user_data/models/<identifier>/sub-train-<COIN>_<timestamp>.html. Datatype: Integer. Default: 0. DI_threshold Activates the use of the Dissimilarity Index for outlier detection when set to > 0. See details about how it works here. Datatype: Positive float (typically < 1). use_SVM_to_remove_outliers Train a support vector machine to detect and remove outliers from the training dataset, as well as from incoming data points. See details about how it works here. Datatype: Boolean. svm_params All parameters available in Sklearn's SGDOneClassSVM(). See details about some select parameters here. Datatype: Dictionary. use_DBSCAN_to_remove_outliers Cluster data using the DBSCAN algorithm to identify and remove outliers from training and prediction data. See details about how it works here. Datatype: Boolean. noise_standard_deviation If set, FreqAI adds noise to the training features with the aim of preventing overfitting. FreqAI generates random deviates from a gaussian distribution with a standard deviation of noise_standard_deviation and adds them to all data points. noise_standard_deviation should be kept relative to the normalized space, i.e., between -1 and 1. In other words, since data in FreqAI is always normalized to be between -1 and 1, noise_standard_deviation: 0.05 would result in 32% of the data being randomly increased/decreased by more than 2.5% (i.e., the percent of data falling within the first standard deviation). Datatype: Integer. Default: 0. outlier_protection_percentage Enable to prevent outlier detection methods from discarding too much data. If more than outlier_protection_percentage % of points are detected as outliers by the SVM or DBSCAN, FreqAI will log a warning message and ignore outlier detection, i.e., the original dataset will be kept intact. If the outlier protection is triggered, no predictions will be made based on the training dataset. Datatype: Float. Default: 30. reverse_train_test_order Split the feature dataset (see below) and use the latest data split for training and test on historical split of the data. This allows the model to be trained up to the most recent data point, while avoiding overfitting. However, you should be careful to understand the unorthodox nature of this parameter before employing it. Datatype: Boolean. Default: False (no reversal). shuffle_after_split Split the data into train and test sets, and then shuffle both sets individually. Datatype: Boolean. Default: False. buffer_train_data_candles Cut buffer_train_data_candles off the beginning and end of the training data after the indicators were populated. The main example use is when predicting maxima and minima, the argrelextrema function cannot know the maxima/minima at the edges of the timerange. To improve model accuracy, it is best to compute argrelextrema on the full timerange and then use this function to cut off the edges (buffer) by the kernel. In another case, if the targets are set to a shifted price movement, this buffer is unnecessary because the shifted candles at the end of the timerange will be NaN and FreqAI will automatically cut those off of the training dataset. Datatype: Integer. Default: 0."},{"location":"freqai-parameter-table/#data-split-parameters","title":"Data split parameters","text":"Parameter Description Data split parameters within the freqai.data_split_parameters sub dictionary data_split_parameters Include any additional parameters available from scikit-learn test_train_split(), which are shown here (external website). Datatype: Dictionary. test_size The fraction of data that should be used for testing instead of training. Datatype: Positive float < 1. shuffle Shuffle the training data points during training. Typically, to not remove the chronological order of data in time-series forecasting, this is set to False. Datatype: Boolean. Default: False."},{"location":"freqai-parameter-table/#model-training-parameters","title":"Model training parameters","text":"Parameter Description Model training parameters within the freqai.model_training_parameters sub dictionary model_training_parameters A flexible dictionary that includes all parameters available by the selected model library. For example, if you use LightGBMRegressor, this dictionary can contain any parameter available by the LightGBMRegressor here (external website). If you select a different model, this dictionary can contain any parameter from that model. A list of the currently available models can be found here. Datatype: Dictionary. n_estimators The number of boosted trees to fit in the training of the model. Datatype: Integer. learning_rate Boosting learning rate during training of the model. Datatype: Float. n_jobs, thread_count, task_type Set the number of threads for parallel processing and the task_type (gpu or cpu). Different model libraries use different parameter names. Datatype: Float."},{"location":"freqai-parameter-table/#reinforcement-learning-parameters","title":"Reinforcement Learning parameters","text":"Parameter Description Reinforcement Learning Parameters within the freqai.rl_config sub dictionary rl_config A dictionary containing the control parameters for a Reinforcement Learning model. Datatype: Dictionary. train_cycles Training time steps will be set based on the `train_cycles * number of training data points. Datatype: Integer. max_trade_duration_candles Guides the agent training to keep trades below desired length. Example usage shown in prediction_models/ReinforcementLearner.py within the customizable calculate_reward() function. Datatype: int. model_type Model string from stable_baselines3 or SBcontrib. Available strings include: 'TRPO', 'ARS', 'RecurrentPPO', 'MaskablePPO', 'PPO', 'A2C', 'DQN'. User should ensure that model_training_parameters match those available to the corresponding stable_baselines3 model by visiting their documentation. PPO doc (external website) Datatype: string. policy_type One of the available policy types from stable_baselines3 Datatype: string. max_training_drawdown_pct The maximum drawdown that the agent is allowed to experience during training. Datatype: float. Default: 0.8 cpu_count Number of threads/cpus to dedicate to the Reinforcement Learning training process (depending on if ReinforcementLearning_multiproc is selected or not). Recommended to leave this untouched, by default, this value is set to the total number of physical cores minus 1. Datatype: int. model_reward_parameters Parameters used inside the customizable calculate_reward() function in ReinforcementLearner.py Datatype: int. add_state_info Tell FreqAI to include state information in the feature set for training and inferencing. The current state variables include trade duration, current profit, trade position. This is only available in dry/live runs, and is automatically switched to false for backtesting. Datatype: bool. Default: False. net_arch Network architecture which is well described in stable_baselines3 doc. In summary: [<shared layers>, dict(vf=[<non-shared value network layers>], pi=[<non-shared policy network layers>])]. By default this is set to [128, 128], which defines 2 shared hidden layers with 128 units each. randomize_starting_position Randomize the starting point of each episode to avoid overfitting. Datatype: bool. Default: False. drop_ohlc_from_features Do not include the normalized ohlc data in the feature set passed to the agent during training (ohlc will still be used for driving the environment in all cases) Datatype: Boolean. Default: False progress_bar Display a progress bar with the current progress, elapsed time and estimated remaining time. Datatype: Boolean. Default: False."},{"location":"freqai-parameter-table/#pytorch-parameters","title":"PyTorch parameters","text":""},{"location":"freqai-parameter-table/#general","title":"general","text":"Parameter Description Model training parameters within the freqai.model_training_parameters sub dictionary learning_rate Learning rate to be passed to the optimizer. Datatype: float. Default: 3e-4. model_kwargs Parameters to be passed to the model class. Datatype: dict. Default: {}. trainer_kwargs Parameters to be passed to the trainer class. Datatype: dict. Default: {}."},{"location":"freqai-parameter-table/#trainer_kwargs","title":"trainer_kwargs","text":"Parameter Description Model training parameters within the freqai.model_training_parameters.model_kwargs sub dictionary n_epochs The n_epochs parameter is a crucial setting in the PyTorch training loop that determines the number of times the entire training dataset will be used to update the model's parameters. An epoch represents one full pass through the entire training dataset. Overrides n_steps. Either n_epochs or n_steps must be set. Datatype: int. optional. Default: 10. n_steps An alternative way of setting n_epochs - the number of training iterations to run. Iteration here refer to the number of times we call optimizer.step(). Ignored if n_epochs is set. A simplified version of the function: n_epochs = n_steps / (n_obs / batch_size) The motivation here is that n_steps is easier to optimize and keep stable across different n_obs - the number of data points. Datatype: int. optional. Default: None. batch_size The size of the batches to use during training. Datatype: int. Default: 64."},{"location":"freqai-parameter-table/#additional-parameters","title":"Additional parameters","text":"Parameter Description Extraneous parameters freqai.keras If the selected model makes use of Keras (typical for TensorFlow-based prediction models), this flag needs to be activated so that the model save/loading follows Keras standards. Datatype: Boolean. Default: False. freqai.conv_width The width of a neural network input tensor. This replaces the need for shifting candles (include_shifted_candles) by feeding in historical data points as the second dimension of the tensor. Technically, this parameter can also be used for regressors, but it only adds computational overhead and does not change the model training/prediction. Datatype: Integer. Default: 2. freqai.reduce_df_footprint Recast all numeric columns to float32/int32, with the objective of reducing ram/disk usage and decreasing train/inference timing. This parameter is set in the main level of the Freqtrade configuration file (not inside FreqAI). Datatype: Boolean. Default: False."},{"location":"freqai-reinforcement-learning/","title":"Reinforcement Learning","text":"Installation size
Reinforcement learning dependencies include large packages such as torch, which should be explicitly requested during ./setup.sh -i by answering \"y\" to the question \"Do you also want dependencies for freqai-rl (~700mb additional space required) [y/N]?\". Users who prefer docker should ensure they use the docker image appended with _freqairl.
Reinforcement learning involves two important components, the agent and the training environment. During agent training, the agent moves through historical data candle by candle, always making 1 of a set of actions: Long entry, long exit, short entry, short exit, neutral). During this training process, the environment tracks the performance of these actions and rewards the agent according to a custom user made calculate_reward() (here we offer a default reward for users to build on if they wish details here). The reward is used to train weights in a neural network.
A second important component of the FreqAI RL implementation is the use of state information. State information is fed into the network at each step, including current profit, current position, and current trade duration. These are used to train the agent in the training environment, and to reinforce the agent in dry/live (this functionality is not available in backtesting). FreqAI + Freqtrade is a perfect match for this reinforcing mechanism since this information is readily available in live deployments.
Reinforcement learning is a natural progression for FreqAI, since it adds a new layer of adaptivity and market reactivity that Classifiers and Regressors cannot match. However, Classifiers and Regressors have strengths that RL does not have such as robust predictions. Improperly trained RL agents may find \"cheats\" and \"tricks\" to maximize reward without actually winning any trades. For this reason, RL is more complex and demands a higher level of understanding than typical Classifiers and Regressors.
"},{"location":"freqai-reinforcement-learning/#the-rl-interface","title":"The RL interface","text":"With the current framework, we aim to expose the training environment via the common \"prediction model\" file, which is a user inherited BaseReinforcementLearner object (e.g. freqai/prediction_models/ReinforcementLearner). Inside this user class, the RL environment is available and customized via MyRLEnv as shown below.
We envision the majority of users focusing their effort on creative design of the calculate_reward() function details here, while leaving the rest of the environment untouched. Other users may not touch the environment at all, and they will only play with the configuration settings and the powerful feature engineering that already exists in FreqAI. Meanwhile, we enable advanced users to create their own model classes entirely.
The framework is built on stable_baselines3 (torch) and OpenAI gym for the base environment class. But generally speaking, the model class is well isolated. Thus, the addition of competing libraries can be easily integrated into the existing framework. For the environment, it is inheriting from gym.Env which means that it is necessary to write an entirely new environment in order to switch to a different library.
As explained above, the agent is \"trained\" in an artificial trading \"environment\". In our case, that environment may seem quite similar to a real Freqtrade backtesting environment, but it is NOT. In fact, the RL training environment is much more simplified. It does not incorporate any of the complicated strategy logic, such as callbacks like custom_exit, custom_stoploss, leverage controls, etc. The RL environment is instead a very \"raw\" representation of the true market, where the agent has free will to learn the policy (read: stoploss, take profit, etc.) which is enforced by the calculate_reward(). Thus, it is important to consider that the agent training environment is not identical to the real world.
Setting up and running a Reinforcement Learning model is the same as running a Regressor or Classifier. The same two flags, --freqaimodel and --strategy, must be defined on the command line:
freqtrade trade --freqaimodel ReinforcementLearner --strategy MyRLStrategy --config config.json\nwhere ReinforcementLearner will use the templated ReinforcementLearner from freqai/prediction_models/ReinforcementLearner (or a custom user defined one located in user_data/freqaimodels). The strategy, on the other hand, follows the same base feature engineering with feature_engineering_* as a typical Regressor. The difference lies in the creation of the targets, Reinforcement Learning doesn't require them. However, FreqAI requires a default (neutral) value to be set in the action column:
def set_freqai_targets(self, dataframe, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n Required function to set the targets for the model.\n All targets must be prepended with `&` to be recognized by the FreqAI internals.\n\n More details about feature engineering available:\n\n https://www.freqtrade.io/en/latest/freqai-feature-engineering\n\n :param df: strategy dataframe which will receive the targets\n usage example: dataframe[\"&-target\"] = dataframe[\"close\"].shift(-1) / dataframe[\"close\"]\n \"\"\"\n # For RL, there are no direct targets to set. This is filler (neutral)\n # until the agent sends an action.\n dataframe[\"&-action\"] = 0\n return dataframe\nMost of the function remains the same as for typical Regressors, however, the function below shows how the strategy must pass the raw price data to the agent so that it has access to raw OHLCV in the training environment:
def feature_engineering_standard(self, dataframe: DataFrame, **kwargs) -> DataFrame:\n # The following features are necessary for RL models\n dataframe[f\"%-raw_close\"] = dataframe[\"close\"]\n dataframe[f\"%-raw_open\"] = dataframe[\"open\"]\n dataframe[f\"%-raw_high\"] = dataframe[\"high\"]\n dataframe[f\"%-raw_low\"] = dataframe[\"low\"]\n return dataframe\nFinally, there is no explicit \"label\" to make - instead it is necessary to assign the &-action column which will contain the agent's actions when accessed in populate_entry/exit_trends(). In the present example, the neutral action to 0. This value should align with the environment used. FreqAI provides two environments, both use 0 as the neutral action.
After users realize there are no labels to set, they will soon understand that the agent is making its \"own\" entry and exit decisions. This makes strategy construction rather simple. The entry and exit signals come from the agent in the form of an integer - which are used directly to decide entries and exits in the strategy:
def populate_entry_trend(self, df: DataFrame, metadata: dict) -> DataFrame:\n\n enter_long_conditions = [df[\"do_predict\"] == 1, df[\"&-action\"] == 1]\n\n if enter_long_conditions:\n df.loc[\n reduce(lambda x, y: x & y, enter_long_conditions), [\"enter_long\", \"enter_tag\"]\n ] = (1, \"long\")\n\n enter_short_conditions = [df[\"do_predict\"] == 1, df[\"&-action\"] == 3]\n\n if enter_short_conditions:\n df.loc[\n reduce(lambda x, y: x & y, enter_short_conditions), [\"enter_short\", \"enter_tag\"]\n ] = (1, \"short\")\n\n return df\n\n def populate_exit_trend(self, df: DataFrame, metadata: dict) -> DataFrame:\n exit_long_conditions = [df[\"do_predict\"] == 1, df[\"&-action\"] == 2]\n if exit_long_conditions:\n df.loc[reduce(lambda x, y: x & y, exit_long_conditions), \"exit_long\"] = 1\n\n exit_short_conditions = [df[\"do_predict\"] == 1, df[\"&-action\"] == 4]\n if exit_short_conditions:\n df.loc[reduce(lambda x, y: x & y, exit_short_conditions), \"exit_short\"] = 1\n\n return df\nIt is important to consider that &-action depends on which environment they choose to use. The example above shows 5 actions, where 0 is neutral, 1 is enter long, 2 is exit long, 3 is enter short and 4 is exit short.
In order to configure the Reinforcement Learner the following dictionary must exist in the freqai config:
\"rl_config\": {\n \"train_cycles\": 25,\n \"add_state_info\": true,\n \"max_trade_duration_candles\": 300,\n \"max_training_drawdown_pct\": 0.02,\n \"cpu_count\": 8,\n \"model_type\": \"PPO\",\n \"policy_type\": \"MlpPolicy\",\n \"model_reward_parameters\": {\n \"rr\": 1,\n \"profit_aim\": 0.025\n }\n }\nParameter details can be found here, but in general the train_cycles decides how many times the agent should cycle through the candle data in its artificial environment to train weights in the model. model_type is a string which selects one of the available models in stable_baselines(external link).
Note
If you would like to experiment with continual_learning, then you should set that value to true in the main freqai configuration dictionary. This will tell the Reinforcement Learning library to continue training new models from the final state of previous models, instead of retraining new models from scratch each time a retrain is initiated.
Note
Remember that the general model_training_parameters dictionary should contain all the model hyperparameter customizations for the particular model_type. For example, PPO parameters can be found here.
Not for production
Warning! The reward function provided with the Freqtrade source code is a showcase of functionality designed to show/test as many possible environment control features as possible. It is also designed to run quickly on small computers. This is a benchmark, it is not for live production. Please beware that you will need to create your own custom_reward() function or use a template built by other users outside of the Freqtrade source code.
As you begin to modify the strategy and the prediction model, you will quickly realize some important differences between the Reinforcement Learner and the Regressors/Classifiers. Firstly, the strategy does not set a target value (no labels!). Instead, you set the calculate_reward() function inside the MyRLEnv class (see below). A default calculate_reward() is provided inside prediction_models/ReinforcementLearner.py to demonstrate the necessary building blocks for creating rewards, but this is not designed for production. Users must create their own custom reinforcement learning model class or use a pre-built one from outside the Freqtrade source code and save it to user_data/freqaimodels. It is inside the calculate_reward() where creative theories about the market can be expressed. For example, you can reward your agent when it makes a winning trade, and penalize the agent when it makes a losing trade. Or perhaps, you wish to reward the agent for entering trades, and penalize the agent for sitting in trades too long. Below we show examples of how these rewards are all calculated:
Hint
The best reward functions are ones that are continuously differentiable, and well scaled. In other words, adding a single large negative penalty to a rare event is not a good idea, and the neural net will not be able to learn that function. Instead, it is better to add a small negative penalty to a common event. This will help the agent learn faster. Not only this, but you can help improve the continuity of your rewards/penalties by having them scale with severity according to some linear/exponential functions. In other words, you'd slowly scale the penalty as the duration of the trade increases. This is better than a single large penalty occurring at a single point in time.
from freqtrade.freqai.prediction_models.ReinforcementLearner import ReinforcementLearner\nfrom freqtrade.freqai.RL.Base5ActionRLEnv import Actions, Base5ActionRLEnv, Positions\n\n\nclass MyCoolRLModel(ReinforcementLearner):\n \"\"\"\n User created RL prediction model.\n\n Save this file to `freqtrade/user_data/freqaimodels`\n\n then use it with:\n\n freqtrade trade --freqaimodel MyCoolRLModel --config config.json --strategy SomeCoolStrat\n\n Here the users can override any of the functions\n available in the `IFreqaiModel` inheritance tree. Most importantly for RL, this\n is where the user overrides `MyRLEnv` (see below), to define custom\n `calculate_reward()` function, or to override any other parts of the environment.\n\n This class also allows users to override any other part of the IFreqaiModel tree.\n For example, the user can override `def fit()` or `def train()` or `def predict()`\n to take fine-tuned control over these processes.\n\n Another common override may be `def data_cleaning_predict()` where the user can\n take fine-tuned control over the data handling pipeline.\n \"\"\"\n class MyRLEnv(Base5ActionRLEnv):\n \"\"\"\n User made custom environment. This class inherits from BaseEnvironment and gym.Env.\n Users can override any functions from those parent classes. Here is an example\n of a user customized `calculate_reward()` function.\n\n Warning!\n This is function is a showcase of functionality designed to show as many possible\n environment control features as possible. It is also designed to run quickly\n on small computers. This is a benchmark, it is *not* for live production.\n \"\"\"\n def calculate_reward(self, action: int) -> float:\n # first, penalize if the action is not valid\n if not self._is_valid(action):\n return -2\n pnl = self.get_unrealized_profit()\n\n factor = 100\n\n pair = self.pair.replace(':', '')\n\n # you can use feature values from dataframe\n # Assumes the shifted RSI indicator has been generated in the strategy.\n rsi_now = self.raw_features[f\"%-rsi-period_10_shift-1_{pair}_\"\n f\"{self.config['timeframe']}\"].iloc[self._current_tick]\n\n # reward agent for entering trades\n if (action in (Actions.Long_enter.value, Actions.Short_enter.value)\n and self._position == Positions.Neutral):\n if rsi_now < 40:\n factor = 40 / rsi_now\n else:\n factor = 1\n return 25 * factor\n\n # discourage agent from not entering trades\n if action == Actions.Neutral.value and self._position == Positions.Neutral:\n return -1\n max_trade_duration = self.rl_config.get('max_trade_duration_candles', 300)\n trade_duration = self._current_tick - self._last_trade_tick\n if trade_duration <= max_trade_duration:\n factor *= 1.5\n elif trade_duration > max_trade_duration:\n factor *= 0.5\n # discourage sitting in position\n if self._position in (Positions.Short, Positions.Long) and \\\n action == Actions.Neutral.value:\n return -1 * trade_duration / max_trade_duration\n # close long\n if action == Actions.Long_exit.value and self._position == Positions.Long:\n if pnl > self.profit_aim * self.rr:\n factor *= self.rl_config['model_reward_parameters'].get('win_reward_factor', 2)\n return float(pnl * factor)\n # close short\n if action == Actions.Short_exit.value and self._position == Positions.Short:\n if pnl > self.profit_aim * self.rr:\n factor *= self.rl_config['model_reward_parameters'].get('win_reward_factor', 2)\n return float(pnl * factor)\n return 0.\nReinforcement Learning models benefit from tracking training metrics. FreqAI has integrated Tensorboard to allow users to track training and evaluation performance across all coins and across all retrainings. Tensorboard is activated via the following command:
tensorboard --logdir user_data/models/unique-id\nwhere unique-id is the identifier set in the freqai configuration file. This command must be run in a separate shell to view the output in the browser at 127.0.0.1:6006 (6006 is the default port used by Tensorboard).
FreqAI also provides a built in episodic summary logger called self.tensorboard_log for adding custom information to the Tensorboard log. By default, this function is already called once per step inside the environment to record the agent actions. All values accumulated for all steps in a single episode are reported at the conclusion of each episode, followed by a full reset of all metrics to 0 in preparation for the subsequent episode.
self.tensorboard_log can also be used anywhere inside the environment, for example, it can be added to the calculate_reward function to collect more detailed information about how often various parts of the reward were called:
class MyRLEnv(Base5ActionRLEnv):\n \"\"\"\n User made custom environment. This class inherits from BaseEnvironment and gym.Env.\n Users can override any functions from those parent classes. Here is an example\n of a user customized `calculate_reward()` function.\n \"\"\"\n def calculate_reward(self, action: int) -> float:\n if not self._is_valid(action):\n self.tensorboard_log(\"invalid\")\n return -2\nNote
The self.tensorboard_log() function is designed for tracking incremented objects only i.e. events, actions inside the training environment. If the event of interest is a float, the float can be passed as the second argument e.g. self.tensorboard_log(\"float_metric1\", 0.23). In this case the metric values are not incremented.
FreqAI provides three base environments, Base3ActionRLEnvironment, Base4ActionEnvironment and Base5ActionEnvironment. As the names imply, the environments are customized for agents that can select from 3, 4 or 5 actions. The Base3ActionEnvironment is the simplest, the agent can select from hold, long, or short. This environment can also be used for long-only bots (it automatically follows the can_short flag from the strategy), where long is the enter condition and short is the exit condition. Meanwhile, in the Base4ActionEnvironment, the agent can enter long, enter short, hold neutral, or exit position. Finally, in the Base5ActionEnvironment, the agent has the same actions as Base4, but instead of a single exit action, it separates exit long and exit short. The main changes stemming from the environment selection include:
calculate_rewardAll of the FreqAI provided environments inherit from an action/position agnostic environment object called the BaseEnvironment, which contains all shared logic. The architecture is designed to be easily customized. The simplest customization is the calculate_reward() (see details here). However, the customizations can be further extended into any of the functions inside the environment. You can do this by simply overriding those functions inside your MyRLEnv in the prediction model file. Or for more advanced customizations, it is encouraged to create an entirely new environment inherited from BaseEnvironment.
Note
Only the Base3ActionRLEnv can do long-only training/trading (set the user strategy attribute can_short = False).
There are two ways to train and deploy an adaptive machine learning model - live deployment and historical backtesting. In both cases, FreqAI runs/simulates periodic retraining of models as shown in the following figure:
"},{"location":"freqai-running/#live-deployments","title":"Live deployments","text":"FreqAI can be run dry/live using the following command:
freqtrade trade --strategy FreqaiExampleStrategy --config config_freqai.example.json --freqaimodel LightGBMRegressor\nWhen launched, FreqAI will start training a new model, with a new identifier, based on the config settings. Following training, the model will be used to make predictions on incoming candles until a new model is available. New models are typically generated as often as possible, with FreqAI managing an internal queue of the coin pairs to try to keep all models equally up to date. FreqAI will always use the most recently trained model to make predictions on incoming live data. If you do not want FreqAI to retrain new models as often as possible, you can set live_retrain_hours to tell FreqAI to wait at least that number of hours before training a new model. Additionally, you can set expired_hours to tell FreqAI to avoid making predictions on models that are older than that number of hours.
Trained models are by default saved to disk to allow for reuse during backtesting or after a crash. You can opt to purge old models to save disk space by setting \"purge_old_models\": true in the config.
To start a dry/live run from a saved backtest model (or from a previously crashed dry/live session), you only need to specify the identifier of the specific model:
\"freqai\": {\n \"identifier\": \"example\",\n \"live_retrain_hours\": 0.5\n }\nIn this case, although FreqAI will initiate with a pre-trained model, it will still check to see how much time has elapsed since the model was trained. If a full live_retrain_hours has elapsed since the end of the loaded model, FreqAI will start training a new model.
FreqAI automatically downloads the proper amount of data needed to ensure training of a model through the defined train_period_days and startup_candle_count (see the parameter table for detailed descriptions of these parameters).
All predictions made during the lifetime of a specific identifier model are stored in historic_predictions.pkl to allow for reloading after a crash or changes made to the config.
FreqAI stores new model files after each successful training. These files become obsolete as new models are generated to adapt to new market conditions. If you are planning to leave FreqAI running for extended periods of time with high frequency retraining, you should enable purge_old_models in the config:
\"freqai\": {\n \"purge_old_models\": 4,\n }\nThis will automatically purge all models older than the four most recently trained ones to save disk space. Inputing \"0\" will never purge any models.
"},{"location":"freqai-running/#backtesting","title":"Backtesting","text":"The FreqAI backtesting module can be executed with the following command:
freqtrade backtesting --strategy FreqaiExampleStrategy --strategy-path freqtrade/templates --config config_examples/config_freqai.example.json --freqaimodel LightGBMRegressor --timerange 20210501-20210701\nIf this command has never been executed with the existing config file, FreqAI will train a new model for each pair, for each backtesting window within the expanded --timerange.
Backtesting mode requires downloading the necessary data before deployment (unlike in dry/live mode where FreqAI handles the data downloading automatically). You should be careful to consider that the time range of the downloaded data is more than the backtesting time range. This is because FreqAI needs data prior to the desired backtesting time range in order to train a model to be ready to make predictions on the first candle of the set backtesting time range. More details on how to calculate the data to download can be found here.
Model reuse
Once the training is completed, you can execute the backtesting again with the same config file and FreqAI will find the trained models and load them instead of spending time training. This is useful if you want to tweak (or even hyperopt) buy and sell criteria inside the strategy. If you want to retrain a new model with the same config file, you should simply change the identifier. This way, you can return to using any model you wish by simply specifying the identifier.
Note
Backtesting calls set_freqai_targets() one time for each backtest window (where the number of windows is the full backtest timerange divided by the backtest_period_days parameter). Doing this means that the targets simulate dry/live behavior without look ahead bias. However, the definition of the features in feature_engineering_*() is performed once on the entire training timerange. This means that you should be sure that features do not look-ahead into the future. More details about look-ahead bias can be found in Common Mistakes.
To allow for tweaking your strategy (not the features!), FreqAI will automatically save the predictions during backtesting so that they can be reused for future backtests and live runs using the same identifier model. This provides a performance enhancement geared towards enabling high-level hyperopting of entry/exit criteria.
An additional directory called backtesting_predictions, which contains all the predictions stored in feather format, will be created in the unique-id folder.
To change your features, you must set a new identifier in the config to signal to FreqAI to train new models.
To save the models generated during a particular backtest so that you can start a live deployment from one of them instead of training a new model, you must set save_backtest_models to True in the config.
Note
To ensure that the model can be reused, freqAI will call your strategy with a dataframe of length 1. If your strategy requires more data than this to generate the same features, you can't reuse backtest predictions for live deployment and need to update your identifier for each new backtest.
FreqAI allow you to reuse live historic predictions through the backtest parameter --freqai-backtest-live-models. This can be useful when you want to reuse predictions generated in dry/run for comparison or other study.
The --timerange parameter must not be informed, as it will be automatically calculated through the data in the historic predictions file.
For live/dry deployments, FreqAI will download the necessary data automatically. However, to use backtesting functionality, you need to download the necessary data using download-data (details here). You need to pay careful attention to understanding how much additional data needs to be downloaded to ensure that there is a sufficient amount of training data before the start of the backtesting time range. The amount of additional data can be roughly estimated by moving the start date of the time range backwards by train_period_days and the startup_candle_count (see the parameter table for detailed descriptions of these parameters) from the beginning of the desired backtesting time range.
As an example, to backtest the --timerange 20210501-20210701 using the example config which sets train_period_days to 30, together with startup_candle_count: 40 on a maximum include_timeframes of 1h, the start date for the downloaded data needs to be 20210501 - 30 days - 40 * 1h / 24 hours = 20210330 (31.7 days earlier than the start of the desired training time range).
The backtesting time range is defined with the typical --timerange parameter in the configuration file. The duration of the sliding training window is set by train_period_days, whilst backtest_period_days is the sliding backtesting window, both in number of days (backtest_period_days can be a float to indicate sub-daily retraining in live/dry mode). In the presented example config (found in config_examples/config_freqai.example.json), the user is asking FreqAI to use a training period of 30 days and backtest on the subsequent 7 days. After the training of the model, FreqAI will backtest the subsequent 7 days. The \"sliding window\" then moves one week forward (emulating FreqAI retraining once per week in live mode) and the new model uses the previous 30 days (including the 7 days used for backtesting by the previous model) to train. This is repeated until the end of --timerange. This means that if you set --timerange 20210501-20210701, FreqAI will have trained 8 separate models at the end of --timerange (because the full range comprises 8 weeks).
Note
Although fractional backtest_period_days is allowed, you should be aware that the --timerange is divided by this value to determine the number of models that FreqAI will need to train in order to backtest the full range. For example, by setting a --timerange of 10 days, and a backtest_period_days of 0.1, FreqAI will need to train 100 models per pair to complete the full backtest. Because of this, a true backtest of FreqAI adaptive training would take a very long time. The best way to fully test a model is to run it dry and let it train constantly. In this case, backtesting would take the exact same amount of time as a dry run.
During dry/live mode, FreqAI trains each coin pair sequentially (on separate threads/GPU from the main Freqtrade bot). This means that there is always an age discrepancy between models. If you are training on 50 pairs, and each pair requires 5 minutes to train, the oldest model will be over 4 hours old. This may be undesirable if the characteristic time scale (the trade duration target) for a strategy is less than 4 hours. You can decide to only make trade entries if the model is less than a certain number of hours old by setting the expiration_hours in the config file:
\"freqai\": {\n \"expiration_hours\": 0.5,\n }\nIn the presented example config, the user will only allow predictions on models that are less than \u00bd hours old.
"},{"location":"freqai-running/#controlling-the-model-learning-process","title":"Controlling the model learning process","text":"Model training parameters are unique to the selected machine learning library. FreqAI allows you to set any parameter for any library using the model_training_parameters dictionary in the config. The example config (found in config_examples/config_freqai.example.json) shows some of the example parameters associated with Catboost and LightGBM, but you can add any parameters available in those libraries or any other machine learning library you choose to implement.
Data split parameters are defined in data_split_parameters which can be any parameters associated with scikit-learn's train_test_split() function. train_test_split() has a parameters called shuffle which allows to shuffle the data or keep it unshuffled. This is particularly useful to avoid biasing training with temporally auto-correlated data. More details about these parameters can be found the scikit-learn website (external website).
The FreqAI specific parameter label_period_candles defines the offset (number of candles into the future) used for the labels. In the presented example config, the user is asking for labels that are 24 candles in the future.
You can choose to adopt a continual learning scheme by setting \"continual_learning\": true in the config. By enabling continual_learning, after training an initial model from scratch, subsequent trainings will start from the final model state of the preceding training. This gives the new model a \"memory\" of the previous state. By default, this is set to False which means that all new models are trained from scratch, without input from previous models.
Since continual_learning means that the model parameter space cannot change between trainings, principal_component_analysis is automatically disabled when continual_learning is enabled. Hint: PCA changes the parameter space and the number of features, learn more about PCA here.
Beware that this is currently a naive approach to incremental learning, and it has a high probability of overfitting/getting stuck in local minima while the market moves away from your model. We have the mechanics available in FreqAI primarily for experimental purposes and so that it is ready for more mature approaches to continual learning in chaotic systems like the crypto market.
"},{"location":"freqai-running/#hyperopt","title":"Hyperopt","text":"You can hyperopt using the same command as for typical Freqtrade hyperopt:
freqtrade hyperopt --hyperopt-loss SharpeHyperOptLoss --strategy FreqaiExampleStrategy --freqaimodel LightGBMRegressor --strategy-path freqtrade/templates --config config_examples/config_freqai.example.json --timerange 20220428-20220507\nhyperopt requires you to have the data pre-downloaded in the same fashion as if you were doing backtesting. In addition, you must consider some restrictions when trying to hyperopt FreqAI strategies:
--analyze-per-epoch hyperopt parameter is not compatible with FreqAI.feature_engineering_*() and set_freqai_targets() functions. This means that you cannot optimize model parameters using hyperopt. Apart from this exception, it is possible to optimize all other spaces.The best method for combining hyperopt and FreqAI is to focus on hyperopting entry/exit thresholds/criteria. You need to focus on hyperopting parameters that are not used in your features. For example, you should not try to hyperopt rolling window lengths in the feature creation, or any part of the FreqAI config which changes predictions. In order to efficiently hyperopt the FreqAI strategy, FreqAI stores predictions as dataframes and reuses them. Hence the requirement to hyperopt entry/exit thresholds/criteria only.
A good example of a hyperoptable parameter in FreqAI is a threshold for the Dissimilarity Index (DI) DI_values beyond which we consider data points as outliers:
di_max = IntParameter(low=1, high=20, default=10, space='buy', optimize=True, load=True)\ndataframe['outlier'] = np.where(dataframe['DI_values'] > self.di_max.value/10, 1, 0)\nThis specific hyperopt would help you understand the appropriate DI_values for your particular parameter space.
Availability
FreqAI includes tensorboard for a variety of models, including XGBoost, all PyTorch models, Reinforcement Learning, and Catboost. If you would like to see Tensorboard integrated into another model type, please open an issue on the Freqtrade GitHub
Requirements
Tensorboard logging requires the FreqAI torch installation/docker image.
The easiest way to use tensorboard is to ensure freqai.activate_tensorboard is set to True (default setting) in your configuration file, run FreqAI, then open a separate shell and run:
cd freqtrade\ntensorboard --logdir user_data/models/unique-id\nwhere unique-id is the identifier set in the freqai configuration file. This command must be run in a separate shell if you wish to view the output in your browser at 127.0.0.1:6060 (6060 is the default port used by Tensorboard).
Deactivate for improved performance
Tensorboard logging can slow down training and should be deactivated for production use.
"},{"location":"freqai/","title":"Introduction","text":""},{"location":"freqai/#freqai","title":"FreqAI","text":""},{"location":"freqai/#introduction","title":"Introduction","text":"FreqAI is a software designed to automate a variety of tasks associated with training a predictive machine learning model to generate market forecasts given a set of input signals. In general, FreqAI aims to be a sandbox for easily deploying robust machine learning libraries on real-time data (details).
Note
FreqAI is, and always will be, a not-for-profit, open-source project. FreqAI does not have a crypto token, FreqAI does not sell signals, and FreqAI does not have a domain besides the present freqtrade documentation.
Features include:
The easiest way to quickly test FreqAI is to run it in dry mode with the following command:
freqtrade trade --config config_examples/config_freqai.example.json --strategy FreqaiExampleStrategy --freqaimodel LightGBMRegressor --strategy-path freqtrade/templates\nYou will see the boot-up process of automatic data downloading, followed by simultaneous training and trading.
Not for production
The example strategy provided with the Freqtrade source code is designed for showcasing/testing a wide variety of FreqAI features. It is also designed to run on small computers so that it can be used as a benchmark between developers and users. It is not designed to be run in production.
An example strategy, prediction model, and config to use as a starting points can be found in freqtrade/templates/FreqaiExampleStrategy.py, freqtrade/freqai/prediction_models/LightGBMRegressor.py, and config_examples/config_freqai.example.json, respectively.
You provide FreqAI with a set of custom base indicators (the same way as in a typical Freqtrade strategy) as well as target values (labels). For each pair in the whitelist, FreqAI trains a model to predict the target values based on the input of custom indicators. The models are then consistently retrained, with a predetermined frequency, to adapt to market conditions. FreqAI offers the ability to both backtest strategies (emulating reality with periodic retraining on historic data) and deploy dry/live runs. In dry/live conditions, FreqAI can be set to constant retraining in a background thread to keep models as up to date as possible.
An overview of the algorithm, explaining the data processing pipeline and model usage, is shown below.
"},{"location":"freqai/#important-machine-learning-vocabulary","title":"Important machine learning vocabulary","text":"Features - the parameters, based on historic data, on which a model is trained. All features for a single candle are stored as a vector. In FreqAI, you build a feature data set from anything you can construct in the strategy.
Labels - the target values that the model is trained toward. Each feature vector is associated with a single label that is defined by you within the strategy. These labels intentionally look into the future and are what you are training the model to be able to predict.
Training - the process of \"teaching\" the model to match the feature sets to the associated labels. Different types of models \"learn\" in different ways which means that one might be better than another for a specific application. More information about the different models that are already implemented in FreqAI can be found here.
Train data - a subset of the feature data set that is fed to the model during training to \"teach\" the model how to predict the targets. This data directly influences weight connections in the model.
Test data - a subset of the feature data set that is used to evaluate the performance of the model after training. This data does not influence nodal weights within the model.
Inferencing - the process of feeding a trained model new unseen data on which it will make a prediction.
"},{"location":"freqai/#install-prerequisites","title":"Install prerequisites","text":"The normal Freqtrade install process will ask if you wish to install FreqAI dependencies. You should reply \"yes\" to this question if you wish to use FreqAI. If you did not reply yes, you can manually install these dependencies after the install with:
pip install -r requirements-freqai.txt\nNote
Catboost will not be installed on low-powered arm devices (raspberry), since it does not provide wheels for this platform.
"},{"location":"freqai/#usage-with-docker","title":"Usage with docker","text":"If you are using docker, a dedicated tag with FreqAI dependencies is available as :freqai. As such - you can replace the image line in your docker compose file with image: freqtradeorg/freqtrade:stable_freqai. This image contains the regular FreqAI dependencies. Similar to native installs, Catboost will not be available on ARM based devices. If you would like to use PyTorch or Reinforcement learning, you should use the torch or RL tags, image: freqtradeorg/freqtrade:stable_freqaitorch, image: freqtradeorg/freqtrade:stable_freqairl.
docker-compose-freqai.yml
We do provide an explicit docker-compose file for this in docker/docker-compose-freqai.yml - which can be used via docker compose -f docker/docker-compose-freqai.yml run ... - or can be copied to replace the original docker file. This docker-compose file also contains a (disabled) section to enable GPU resources within docker containers. This obviously assumes the system has GPU resources available.
Forecasting chaotic time-series based systems, such as equity/cryptocurrency markets, requires a broad set of tools geared toward testing a wide range of hypotheses. Fortunately, a recent maturation of robust machine learning libraries (e.g. scikit-learn) has opened up a wide range of research possibilities. Scientists from a diverse range of fields can now easily prototype their studies on an abundance of established machine learning algorithms. Similarly, these user-friendly libraries enable \"citizen scientists\" to use their basic Python skills for data exploration. However, leveraging these machine learning libraries on historical and live chaotic data sources can be logistically difficult and expensive. Additionally, robust data collection, storage, and handling presents a disparate challenge. FreqAI aims to provide a generalized and extensible open-sourced framework geared toward live deployments of adaptive modeling for market forecasting. The FreqAI framework is effectively a sandbox for the rich world of open-source machine learning libraries. Inside the FreqAI sandbox, users find they can combine a wide variety of third-party libraries to test creative hypotheses on a free live 24/7 chaotic data source - cryptocurrency exchange data.
FreqAI is published in the Journal of Open Source Software. If you find FreqAI useful in your research, please use the following citation:
@article{Caulk2022, \n doi = {10.21105/joss.04864},\n url = {https://doi.org/10.21105/joss.04864},\n year = {2022}, publisher = {The Open Journal},\n volume = {7}, number = {80}, pages = {4864},\n author = {Robert A. Caulk and Elin T\u00f6rnquist and Matthias Voppichler and Andrew R. Lawless and Ryan McMullan and Wagner Costa Santos and Timothy C. Pogue and Johan van der Vlugt and Stefan P. Gehring and Pascal Schmidt},\n title = {FreqAI: generalizing adaptive modeling for chaotic time-series market forecasts},\n journal = {Journal of Open Source Software} } \nFreqAI cannot be combined with dynamic VolumePairlists (or any pairlist filter that adds and removes pairs dynamically). This is for performance reasons - FreqAI relies on making quick predictions/retrains. To do this effectively, it needs to download all the training data at the beginning of a dry/live instance. FreqAI stores and appends new candles automatically for future retrains. This means that if new pairs arrive later in the dry run due to a volume pairlist, it will not have the data ready. However, FreqAI does work with the ShufflePairlist or a VolumePairlist which keeps the total pairlist constant (but reorders the pairs according to volume).
Here we compile some external materials that provide deeper looks into various components of FreqAI:
You can find support for FreqAI in a variety of places, including the Freqtrade discord, the dedicated FreqAI discord, and in github issues.
"},{"location":"freqai/#credits","title":"Credits","text":"FreqAI is developed by a group of individuals who all contribute specific skillsets to the project.
Conception and software development: Robert Caulk @robcaulk
Theoretical brainstorming and data analysis: Elin T\u00f6rnquist @th0rntwig
Code review and software architecture brainstorming: @xmatthias
Software development: Wagner Costa @wagnercosta Emre Suzen @aemr3 Timothy Pogue @wizrds
Beta testing and bug reporting: Stefan Gehring @bloodhunter4rc, @longyu, Andrew Lawless @paranoidandy, Pascal Schmidt @smidelis, Ryan McMullan @smarmau, Juha Nyk\u00e4nen @suikula, Johan van der Vlugt @jooopiert, Rich\u00e1rd J\u00f3zsa @richardjosza
"},{"location":"hyperopt/","title":"Hyperopt","text":"This page explains how to tune your strategy by finding the optimal parameters, a process called hyperparameter optimization. The bot uses algorithms included in the optuna package to accomplish this. The search will burn all your CPU cores, make your laptop sound like a fighter jet and still take a long time.
In general, the search for best parameters starts with a few random combinations (see below for more details) and then uses one of optuna's sampler algorithms (currently NSGAIIISampler) to quickly find a combination of parameters in the search hyperspace that minimizes the value of the loss function.
Hyperopt requires historic data to be available, just as backtesting does (hyperopt runs backtesting many times with different parameters). To learn how to get data for the pairs and exchange you're interested in, head over to the Data Downloading section of the documentation.
Bug
Hyperopt can crash when used with only 1 CPU Core as found out in Issue #1133
Note
Since 2021.4 release you no longer have to write a separate hyperopt class, but can configure the parameters directly in the strategy. The legacy method was supported up to 2021.8 and has been removed in 2021.9.
"},{"location":"hyperopt/#install-hyperopt-dependencies","title":"Install hyperopt dependencies","text":"Since Hyperopt dependencies are not needed to run the bot itself, are heavy, can not be easily built on some platforms (like Raspberry PI), they are not installed by default. Before you run Hyperopt, you need to install the corresponding dependencies, as described in this section below.
Note
Since Hyperopt is a resource intensive process, running it on a Raspberry Pi is not recommended nor supported.
"},{"location":"hyperopt/#docker","title":"Docker","text":"The docker-image includes hyperopt dependencies, no further action needed.
"},{"location":"hyperopt/#easy-installation-script-setupsh-manual-installation","title":"Easy installation script (setup.sh) / Manual installation","text":"source .venv/bin/activate\npip install -r requirements-hyperopt.txt\nusage: freqtrade hyperopt [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH] [-s NAME]\n [--strategy-path PATH] [--recursive-strategy-search]\n [--freqaimodel NAME] [--freqaimodel-path PATH]\n [-i TIMEFRAME] [--timerange TIMERANGE]\n [--data-format-ohlcv {json,jsongz,feather,parquet}]\n [--max-open-trades INT]\n [--stake-amount STAKE_AMOUNT] [--fee FLOAT]\n [-p PAIRS [PAIRS ...]] [--hyperopt-path PATH]\n [--eps] [--enable-protections]\n [--dry-run-wallet DRY_RUN_WALLET]\n [--timeframe-detail TIMEFRAME_DETAIL] [-e INT]\n [--spaces {all,buy,sell,roi,stoploss,trailing,protection,trades,default} [{all,buy,sell,roi,stoploss,trailing,protection,trades,default} ...]]\n [--print-all] [--print-json] [-j JOBS]\n [--random-state INT] [--min-trades INT]\n [--hyperopt-loss NAME] [--disable-param-export]\n [--ignore-missing-spaces] [--analyze-per-epoch]\n [--early-stop INT]\n\noptions:\n -h, --help show this help message and exit\n -i TIMEFRAME, --timeframe TIMEFRAME\n Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).\n --timerange TIMERANGE\n Specify what timerange of data to use.\n --data-format-ohlcv {json,jsongz,feather,parquet}\n Storage format for downloaded candle (OHLCV) data.\n (default: `feather`).\n --max-open-trades INT\n Override the value of the `max_open_trades`\n configuration setting.\n --stake-amount STAKE_AMOUNT\n Override the value of the `stake_amount` configuration\n setting.\n --fee FLOAT Specify fee ratio. Will be applied twice (on trade\n entry and exit).\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --hyperopt-path PATH Specify additional lookup path for Hyperopt Loss\n functions.\n --eps, --enable-position-stacking\n Allow buying the same pair multiple times (position\n stacking).\n --enable-protections, --enableprotections\n Enable protections for backtesting. Will slow\n backtesting down by a considerable amount, but will\n include configured protections\n --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET\n Starting balance, used for backtesting / hyperopt and\n dry-runs.\n --timeframe-detail TIMEFRAME_DETAIL\n Specify detail timeframe for backtesting (`1m`, `5m`,\n `30m`, `1h`, `1d`).\n -e INT, --epochs INT Specify number of epochs (default: 100).\n --spaces {all,buy,sell,roi,stoploss,trailing,protection,trades,default} [{all,buy,sell,roi,stoploss,trailing,protection,trades,default} ...]\n Specify which parameters to hyperopt. Space-separated\n list.\n --print-all Print all results, not only the best ones.\n --print-json Print output in JSON format.\n -j JOBS, --job-workers JOBS\n The number of concurrently running jobs for\n hyperoptimization (hyperopt worker processes). If -1\n (default), all CPUs are used, for -2, all CPUs but one\n are used, etc. If 1 is given, no parallel computing\n code is used at all.\n --random-state INT Set random state to some positive integer for\n reproducible hyperopt results.\n --min-trades INT Set minimal desired number of trades for evaluations\n in the hyperopt optimization path (default: 1).\n --hyperopt-loss NAME, --hyperoptloss NAME\n Specify the class name of the hyperopt loss function\n class (IHyperOptLoss). Different functions can\n generate completely different results, since the\n target for optimization is different. Built-in\n Hyperopt-loss-functions are:\n ShortTradeDurHyperOptLoss, OnlyProfitHyperOptLoss,\n SharpeHyperOptLoss, SharpeHyperOptLossDaily,\n SortinoHyperOptLoss, SortinoHyperOptLossDaily,\n CalmarHyperOptLoss, MaxDrawDownHyperOptLoss,\n MaxDrawDownRelativeHyperOptLoss,\n MaxDrawDownPerPairHyperOptLoss,\n ProfitDrawDownHyperOptLoss, MultiMetricHyperOptLoss\n --disable-param-export\n Disable automatic hyperopt parameter export.\n --ignore-missing-spaces, --ignore-unparameterized-spaces\n Suppress errors for any requested Hyperopt spaces that\n do not contain any parameters.\n --analyze-per-epoch Run populate_indicators once per epoch.\n --early-stop INT Early stop hyperopt if no improvement after (default:\n 0) epochs.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n\nStrategy arguments:\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n --freqaimodel NAME Specify a custom freqaimodels.\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\nChecklist on all tasks / possibilities in hyperopt
Depending on the space you want to optimize, only some of the below are required:
space='buy' - for entry signal optimizationspace='sell' - for exit signal optimizationNote
populate_indicators needs to create all indicators any of the spaces may use, otherwise hyperopt will not work.
Rarely you may also need to create a nested class named HyperOpt and implement
roi_space - for custom ROI optimization (if you need the ranges for the ROI parameters in the optimization hyperspace that differ from default)generate_roi_table - for custom ROI optimization (if you need the ranges for the values in the ROI table that differ from default or the number of entries (steps) in the ROI table which differs from the default 4 steps)stoploss_space - for custom stoploss optimization (if you need the range for the stoploss parameter in the optimization hyperspace that differs from default)trailing_space - for custom trailing stop optimization (if you need the ranges for the trailing stop parameters in the optimization hyperspace that differ from default)max_open_trades_space - for custom max_open_trades optimization (if you need the ranges for the max_open_trades parameter in the optimization hyperspace that differ from default)Quickly optimize ROI, stoploss and trailing stoploss
You can quickly optimize the spaces roi, stoploss and trailing without changing anything in your strategy.
# Have a working strategy at hand.\nfreqtrade hyperopt --hyperopt-loss SharpeHyperOptLossDaily --spaces roi stoploss trailing --strategy MyWorkingStrategy --config config.json -e 100\nHyperopt will first load your data into memory and will then run populate_indicators() once per Pair to generate all indicators, unless --analyze-per-epoch is specified.
Hyperopt will then spawn into different processes (number of processors, or -j <n>), and run backtesting over and over again, changing the parameters that are part of the --spaces defined.
For every new set of parameters, freqtrade will run first populate_entry_trend() followed by populate_exit_trend(), and then run the regular backtesting process to simulate trades.
After backtesting, the results are passed into the loss function, which will evaluate if this result was better or worse than previous results. Based on the loss function result, hyperopt will determine the next set of parameters to try in the next round of backtesting.
"},{"location":"hyperopt/#configure-your-guards-and-triggers","title":"Configure your Guards and Triggers","text":"There are two places you need to change in your strategy file to add a new buy hyperopt for testing:
populate_entry_trend() - use defined parameter values instead of raw constants.There you have two different types of indicators: 1. guards and 2. triggers.
Guards and Triggers
Technically, there is no difference between Guards and Triggers. However, this guide will make this distinction to make it clear that signals should not be \"sticking\". Sticking signals are signals that are active for multiple candles. This can lead into entering a signal late (right before the signal disappears - which means that the chance of success is a lot lower than right at the beginning).
Hyper-optimization will, for each epoch round, pick one trigger and possibly multiple guards.
"},{"location":"hyperopt/#exit-signal-optimization","title":"Exit signal optimization","text":"Similar to the entry-signal above, exit-signals can also be optimized. Place the corresponding settings into the following methods
sell_*, or by explicitly defining space='sell'.populate_exit_trend() - use defined parameter values instead of raw constants.The configuration and rules are the same than for buy signals.
"},{"location":"hyperopt/#solving-a-mystery","title":"Solving a Mystery","text":"Let's say you are curious: should you use MACD crossings or lower Bollinger Bands to trigger your long entries. And you also wonder should you use RSI or ADX to help with those decisions. If you decide to use RSI or ADX, which values should I use for them?
So let's use hyperparameter optimization to solve this mystery.
"},{"location":"hyperopt/#defining-indicators-to-be-used","title":"Defining indicators to be used","text":"We start by calculating the indicators our strategy is going to use.
class MyAwesomeStrategy(IStrategy):\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Generate all indicators used by the strategy\n \"\"\"\n dataframe['adx'] = ta.ADX(dataframe)\n dataframe['rsi'] = ta.RSI(dataframe)\n macd = ta.MACD(dataframe)\n dataframe['macd'] = macd['macd']\n dataframe['macdsignal'] = macd['macdsignal']\n dataframe['macdhist'] = macd['macdhist']\n\n bollinger = ta.BBANDS(dataframe, timeperiod=20, nbdevup=2.0, nbdevdn=2.0)\n dataframe['bb_lowerband'] = bollinger['lowerband']\n dataframe['bb_middleband'] = bollinger['middleband']\n dataframe['bb_upperband'] = bollinger['upperband']\n return dataframe\nWe continue to define hyperoptable parameters:
class MyAwesomeStrategy(IStrategy):\n buy_adx = DecimalParameter(20, 40, decimals=1, default=30.1, space=\"buy\")\n buy_rsi = IntParameter(20, 40, default=30, space=\"buy\")\n buy_adx_enabled = BooleanParameter(default=True, space=\"buy\")\n buy_rsi_enabled = CategoricalParameter([True, False], default=False, space=\"buy\")\n buy_trigger = CategoricalParameter([\"bb_lower\", \"macd_cross_signal\"], default=\"bb_lower\", space=\"buy\")\nThe above definition says: I have five parameters I want to randomly combine to find the best combination. buy_rsi is an integer parameter, which will be tested between 20 and 40. This space has a size of 20. buy_adx is a decimal parameter, which will be evaluated between 20 and 40 with 1 decimal place (so values are 20.1, 20.2, ...). This space has a size of 200. Then we have three category variables. First two are either True or False. We use these to either enable or disable the ADX and RSI guards. The last one we call trigger and use it to decide which buy trigger we want to use.
Parameter space assignment
Parameters must either be assigned to a variable named buy_* or sell_* - or contain space='buy' | space='sell' to be assigned to a space correctly. If no parameter is available for a space, you'll receive the error that no space was found when running hyperopt. Parameters with unclear space (e.g. adx_period = IntParameter(4, 24, default=14) - no explicit nor implicit space) will not be detected and will therefore be ignored.
So let's write the buy strategy using these values:
def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n conditions = []\n # GUARDS AND TRENDS\n if self.buy_adx_enabled.value:\n conditions.append(dataframe['adx'] > self.buy_adx.value)\n if self.buy_rsi_enabled.value:\n conditions.append(dataframe['rsi'] < self.buy_rsi.value)\n\n # TRIGGERS\n if self.buy_trigger.value == 'bb_lower':\n conditions.append(dataframe['close'] < dataframe['bb_lowerband'])\n if self.buy_trigger.value == 'macd_cross_signal':\n conditions.append(qtpylib.crossed_above(\n dataframe['macd'], dataframe['macdsignal']\n ))\n\n # Check that volume is not 0\n conditions.append(dataframe['volume'] > 0)\n\n if conditions:\n dataframe.loc[\n reduce(lambda x, y: x & y, conditions),\n 'enter_long'] = 1\n\n return dataframe\nHyperopt will now call populate_entry_trend() many times (epochs) with different value combinations. It will use the given historical data and simulate buys based on the buy signals generated with the above function. Based on the results, hyperopt will tell you which parameter combination produced the best results (based on the configured loss function).
Note
The above setup expects to find ADX, RSI and Bollinger Bands in the populated indicators. When you want to test an indicator that isn't used by the bot currently, remember to add it to the populate_indicators() method in your strategy or hyperopt file.
There are four parameter types each suited for different purposes.
IntParameter - defines an integral parameter with upper and lower boundaries of search space.DecimalParameter - defines a floating point parameter with a limited number of decimals (default 3). Should be preferred instead of RealParameter in most cases.RealParameter - defines a floating point parameter with upper and lower boundaries and no precision limit. Rarely used as it creates a space with a near infinite number of possibilities.CategoricalParameter - defines a parameter with a predetermined number of choices.BooleanParameter - Shorthand for CategoricalParameter([True, False]) - great for \"enable\" parameters.There are two parameter options that can help you to quickly test various ideas:
optimize - when set to False, the parameter will not be included in optimization process. (Default: True)load - when set to False, results of a previous hyperopt run (in buy_params and sell_params either in your strategy or the JSON output file) will not be used as the starting value for subsequent hyperopts. The default value specified in the parameter will be used instead. (Default: True)Effects of load=False on backtesting
Be aware that setting the load option to False will mean backtesting will also use the default value specified in the parameter and not the value found through hyperoptimisation.
Warning
Hyperoptable parameters cannot be used in populate_indicators - as hyperopt does not recalculate indicators for each epoch, so the starting value would be used in this case.
Assuming you have a simple strategy in mind - a EMA cross strategy (2 Moving averages crossing) - and you'd like to find the ideal parameters for this strategy. By default, we assume a stoploss of 5% - and a take-profit (minimal_roi) of 10% - which means freqtrade will sell the trade once 10% profit has been reached.
from pandas import DataFrame\nfrom functools import reduce\n\nimport talib.abstract as ta\n\nfrom freqtrade.strategy import (BooleanParameter, CategoricalParameter, DecimalParameter, \n IStrategy, IntParameter)\nimport freqtrade.vendor.qtpylib.indicators as qtpylib\n\nclass MyAwesomeStrategy(IStrategy):\n stoploss = -0.05\n timeframe = '15m'\n minimal_roi = {\n \"0\": 0.10\n }\n # Define the parameter spaces\n buy_ema_short = IntParameter(3, 50, default=5)\n buy_ema_long = IntParameter(15, 200, default=50)\n\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"Generate all indicators used by the strategy\"\"\"\n\n # Calculate all ema_short values\n for val in self.buy_ema_short.range:\n dataframe[f'ema_short_{val}'] = ta.EMA(dataframe, timeperiod=val)\n\n # Calculate all ema_long values\n for val in self.buy_ema_long.range:\n dataframe[f'ema_long_{val}'] = ta.EMA(dataframe, timeperiod=val)\n\n return dataframe\n\n def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n conditions = []\n conditions.append(qtpylib.crossed_above(\n dataframe[f'ema_short_{self.buy_ema_short.value}'], dataframe[f'ema_long_{self.buy_ema_long.value}']\n ))\n\n # Check that volume is not 0\n conditions.append(dataframe['volume'] > 0)\n\n if conditions:\n dataframe.loc[\n reduce(lambda x, y: x & y, conditions),\n 'enter_long'] = 1\n return dataframe\n\n def populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n conditions = []\n conditions.append(qtpylib.crossed_above(\n dataframe[f'ema_long_{self.buy_ema_long.value}'], dataframe[f'ema_short_{self.buy_ema_short.value}']\n ))\n\n # Check that volume is not 0\n conditions.append(dataframe['volume'] > 0)\n\n if conditions:\n dataframe.loc[\n reduce(lambda x, y: x & y, conditions),\n 'exit_long'] = 1\n return dataframe\nBreaking it down:
Using self.buy_ema_short.range will return a range object containing all entries between the Parameters low and high value. In this case (IntParameter(3, 50, default=5)), the loop would run for all numbers between 3 and 50 ([3, 4, 5, ... 49, 50]). By using this in a loop, hyperopt will generate 48 new columns (['buy_ema_3', 'buy_ema_4', ... , 'buy_ema_50']).
Hyperopt itself will then use the selected value to create the buy and sell signals.
While this strategy is most likely too simple to provide consistent profit, it should serve as an example how optimize indicator parameters.
Note
self.buy_ema_short.range will act differently between hyperopt and other modes. For hyperopt, the above example may generate 48 new columns, however for all other modes (backtesting, dry/live), it will only generate the column for the selected value. You should therefore avoid using the resulting column with explicit values (values other than self.buy_ema_short.value).
Note
range property may also be used with DecimalParameter and CategoricalParameter. RealParameter does not provide this property due to infinite search space.
During normal hyperopting, indicators are calculated once and supplied to each epoch, linearly increasing RAM usage as a factor of increasing cores. As this also has performance implications, there are two alternatives to reduce RAM usage
ema_short and ema_long calculations from populate_indicators() to populate_entry_trend(). Since populate_entry_trend() will be calculated every epoch, you don't need to use .range functionality.--analyze-per-epoch which will move the execution of populate_indicators() to the epoch process, calculating a single value per parameter per epoch instead of using the .range functionality. In this case, .range functionality will only return the actually used value.These alternatives will reduce RAM usage, but increase CPU usage. However, your hyperopting run will be less likely to fail due to Out Of Memory (OOM) issues.
Whether you are using .range functionality or the alternatives above, you should try to use space ranges as small as possible since this will improve CPU/RAM usage.
Freqtrade can also optimize protections. How you optimize protections is up to you, and the following should be considered as example only.
The strategy will simply need to define the \"protections\" entry as property returning a list of protection configurations.
from pandas import DataFrame\nfrom functools import reduce\n\nimport talib.abstract as ta\n\nfrom freqtrade.strategy import (BooleanParameter, CategoricalParameter, DecimalParameter, \n IStrategy, IntParameter)\nimport freqtrade.vendor.qtpylib.indicators as qtpylib\n\nclass MyAwesomeStrategy(IStrategy):\n stoploss = -0.05\n timeframe = '15m'\n # Define the parameter spaces\n cooldown_lookback = IntParameter(2, 48, default=5, space=\"protection\", optimize=True)\n stop_duration = IntParameter(12, 200, default=5, space=\"protection\", optimize=True)\n use_stop_protection = BooleanParameter(default=True, space=\"protection\", optimize=True)\n\n\n @property\n def protections(self):\n prot = []\n\n prot.append({\n \"method\": \"CooldownPeriod\",\n \"stop_duration_candles\": self.cooldown_lookback.value\n })\n if self.use_stop_protection.value:\n prot.append({\n \"method\": \"StoplossGuard\",\n \"lookback_period_candles\": 24 * 3,\n \"trade_limit\": 4,\n \"stop_duration_candles\": self.stop_duration.value,\n \"only_per_pair\": False\n })\n\n return prot\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # ...\nYou can then run hyperopt as follows: freqtrade hyperopt --hyperopt-loss SharpeHyperOptLossDaily --strategy MyAwesomeStrategy --spaces protection
Note
The protection space is not part of the default space, and is only available with the Parameters Hyperopt interface, not with the legacy hyperopt interface (which required separate hyperopt files). Freqtrade will also automatically change the \"--enable-protections\" flag if the protection space is selected.
Warning
If protections are defined as property, entries from the configuration will be ignored. It is therefore recommended to not define protections in the configuration.
"},{"location":"hyperopt/#migrating-from-previous-property-setups","title":"Migrating from previous property setups","text":"A migration from a previous setup is pretty simple, and can be accomplished by converting the protections entry to a property. In simple terms, the following configuration will be converted to the below.
class MyAwesomeStrategy(IStrategy):\n protections = [\n {\n \"method\": \"CooldownPeriod\",\n \"stop_duration_candles\": 4\n }\n ]\nResult
class MyAwesomeStrategy(IStrategy):\n\n @property\n def protections(self):\n return [\n {\n \"method\": \"CooldownPeriod\",\n \"stop_duration_candles\": 4\n }\n ]\nYou will then obviously also change potential interesting entries to parameters to allow hyper-optimization.
"},{"location":"hyperopt/#optimizing-max_entry_position_adjustment","title":"Optimizingmax_entry_position_adjustment","text":"While max_entry_position_adjustment is not a separate space, it can still be used in hyperopt by using the property approach shown above.
from pandas import DataFrame\nfrom functools import reduce\n\nimport talib.abstract as ta\n\nfrom freqtrade.strategy import (BooleanParameter, CategoricalParameter, DecimalParameter, \n IStrategy, IntParameter)\nimport freqtrade.vendor.qtpylib.indicators as qtpylib\n\nclass MyAwesomeStrategy(IStrategy):\n stoploss = -0.05\n timeframe = '15m'\n\n # Define the parameter spaces\n max_epa = CategoricalParameter([-1, 0, 1, 3, 5, 10], default=1, space=\"buy\", optimize=True)\n\n @property\n def max_entry_position_adjustment(self):\n return self.max_epa.value\n\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # ...\nIntParameter You can also use the IntParameter for this optimization, but you must explicitly return an integer:
max_epa = IntParameter(-1, 10, default=1, space=\"buy\", optimize=True)\n\n@property\ndef max_entry_position_adjustment(self):\n return int(self.max_epa.value)\nEach hyperparameter tuning requires a target. This is usually defined as a loss function (sometimes also called objective function), which should decrease for more desirable results, and increase for bad results.
A loss function must be specified via the --hyperopt-loss <Class-name> argument (or optionally via the configuration under the \"hyperopt_loss\" key). This class should be in its own file within the user_data/hyperopts/ directory.
Currently, the following loss functions are builtin:
ShortTradeDurHyperOptLoss - (default legacy Freqtrade hyperoptimization loss function) - Mostly for short trade duration and avoiding losses.OnlyProfitHyperOptLoss - takes only amount of profit into consideration.SharpeHyperOptLoss - Optimizes Sharpe Ratio calculated on trade returns relative to standard deviation.SharpeHyperOptLossDaily - Optimizes Sharpe Ratio calculated on daily trade returns relative to standard deviation.SortinoHyperOptLoss - Optimizes Sortino Ratio calculated on trade returns relative to downside standard deviation.SortinoHyperOptLossDaily - optimizes Sortino Ratio calculated on daily trade returns relative to downside standard deviation.MaxDrawDownHyperOptLoss - Optimizes Maximum absolute drawdown.MaxDrawDownRelativeHyperOptLoss - Optimizes both maximum absolute drawdown while also adjusting for maximum relative drawdown.MaxDrawDownPerPairHyperOptLoss - Calculates the profit/drawdown ratio per pair and returns the worst result as objective, forcing hyperopt to optimize the parameters for all pairs in the pairlist. This way, we prevent one or more pairs with good results from inflating the metrics, while the pairs with poor results are not represented and therefore not optimized.CalmarHyperOptLoss - Optimizes Calmar Ratio calculated on trade returns relative to max drawdown.ProfitDrawDownHyperOptLoss - Optimizes by max Profit & min Drawdown objective. DRAWDOWN_MULT variable within the hyperoptloss file can be adjusted to be stricter or more flexible on drawdown purposes.MultiMetricHyperOptLoss - Optimizes by several key metrics to achieve balanced performance. The primary focus is on maximizing Profit and minimizing Drawdown, while also considering additional metrics such as Profit Factor, Expectancy Ratio and Winrate. Moreover, it applies a penalty for epochs with a low number of trades, encouraging strategies with adequate trade frequency.Creation of a custom loss function is covered in the Advanced Hyperopt part of the documentation.
"},{"location":"hyperopt/#execute-hyperopt","title":"Execute Hyperopt","text":"Once you have updated your hyperopt configuration you can run it. Because hyperopt tries a lot of combinations to find the best parameters it will take time to get a good result.
We strongly recommend to use screen or tmux to prevent any connection loss.
freqtrade hyperopt --config config.json --hyperopt-loss <hyperoptlossname> --strategy <strategyname> -e 500 --spaces all\nThe -e option will set how many evaluations hyperopt will do. Since hyperopt uses Bayesian search, running too many epochs at once may not produce greater results. Experience has shown that best results are usually not improving much after 500-1000 epochs. The --early-stop option will set after how many epochs with no improvements hyperopt will stop. A good value is 20-30% of the total epochs. Any value greater than 0 and lower than 20 it will be replaced by 20. Early stop is by default disabled (--early-stop=0)
Doing multiple runs (executions) with a few 1000 epochs and different random state will most likely produce different results.
The --spaces all option determines that all possible parameters should be optimized. Possibilities are listed below.
Note
Hyperopt will store hyperopt results with the timestamp of the hyperopt start time. Reading commands (hyperopt-list, hyperopt-show) can use --hyperopt-filename <filename> to read and display older hyperopt results. You can find a list of filenames with ls -l user_data/hyperopt_results/.
If you would like to hyperopt parameters using an alternate historical data set that you have on-disk, use the --datadir PATH option. By default, hyperopt uses data from directory user_data/data.
Use the --timerange argument to change how much of the test-set you want to use. For example, to use one month of data, pass --timerange 20210101-20210201 (from january 2021 - february 2021) to the hyperopt call.
Full command:
freqtrade hyperopt --strategy <strategyname> --timerange 20210101-20210201\nUse the --spaces option to limit the search space used by hyperopt. Letting Hyperopt optimize everything is a huuuuge search space. Often it might make more sense to start by just searching for initial buy algorithm. Or maybe you just want to optimize your stoploss or roi table for that awesome new buy strategy you have.
Legal values are:
all: optimize everythingbuy: just search for a new buy strategysell: just search for a new sell strategyroi: just optimize the minimal profit table for your strategystoploss: search for the best stoploss valuetrailing: search for the best trailing stop valuestrades: search for the best max open trades valuesprotection: search for the best protection parameters (read the protections section on how to properly define these)default: all except trailing, trades and protection--spaces roi stoplossThe default Hyperopt Search Space, used when no --space command line option is specified, does not include the trailing hyperspace. We recommend you to run optimization for the trailing hyperspace separately, when the best parameters for other hyperspaces were found, validated and pasted into your custom strategy.
Once Hyperopt is completed you can use the result to update your strategy. Given the following result from hyperopt:
Best result:\n\n 44/100: 135 trades. Avg profit 0.57%. Total profit 0.03871918 BTC (0.7722%). Avg duration 180.4 mins. Objective: 1.94367\n\n # Buy hyperspace params:\n buy_params = {\n 'buy_adx': 44,\n 'buy_rsi': 29,\n 'buy_adx_enabled': False,\n 'buy_rsi_enabled': True,\n 'buy_trigger': 'bb_lower'\n }\nYou should understand this result like:
bb_lower.'buy_adx_enabled': False.'buy_rsi_enabled': True) and the best value is 29.0 ('buy_rsi': 29.0)When using Hyperoptable parameters, the result of your hyperopt-run will be written to a json file next to your strategy (so for MyAwesomeStrategy.py, the file would be MyAwesomeStrategy.json). This file is also updated when using the hyperopt-show sub-command, unless --disable-param-export is provided to either of the 2 commands.
Your strategy class can also contain these results explicitly. Simply copy hyperopt results block and paste them at class level, replacing old parameters (if any). New parameters will automatically be loaded next time strategy is executed.
Transferring your whole hyperopt result to your strategy would then look like:
class MyAwesomeStrategy(IStrategy):\n # Buy hyperspace params:\n buy_params = {\n 'buy_adx': 44,\n 'buy_rsi': 29,\n 'buy_adx_enabled': False,\n 'buy_rsi_enabled': True,\n 'buy_trigger': 'bb_lower'\n }\nNote
Values in the configuration file will overwrite Parameter-file level parameters - and both will overwrite parameters within the strategy. The prevalence is therefore: config > parameter file > strategy *_params > parameter default
If you are optimizing ROI (i.e. if optimization search-space contains 'all', 'default' or 'roi'), your result will look as follows and include a ROI table:
Best result:\n\n 44/100: 135 trades. Avg profit 0.57%. Total profit 0.03871918 BTC (0.7722%). Avg duration 180.4 mins. Objective: 1.94367\n\n # ROI table:\n minimal_roi = {\n 0: 0.10674,\n 21: 0.09158,\n 78: 0.03634,\n 118: 0\n }\nIn order to use this best ROI table found by Hyperopt in backtesting and for live trades/dry-run, copy-paste it as the value of the minimal_roi attribute of your custom strategy:
# Minimal ROI designed for the strategy.\n # This attribute will be overridden if the config file contains \"minimal_roi\"\n minimal_roi = {\n 0: 0.10674,\n 21: 0.09158,\n 78: 0.03634,\n 118: 0\n }\nAs stated in the comment, you can also use it as the value of the minimal_roi setting in the configuration file.
If you are optimizing ROI, Freqtrade creates the 'roi' optimization hyperspace for you -- it's the hyperspace of components for the ROI tables. By default, each ROI table generated by the Freqtrade consists of 4 rows (steps). Hyperopt implements adaptive ranges for ROI tables with ranges for values in the ROI steps that depend on the timeframe used. By default the values vary in the following ranges (for some of the most used timeframes, values are rounded to 3 digits after the decimal point):
# step 1m 5m 1h 1d 1 0 0.011...0.119 0 0.03...0.31 0 0.068...0.711 0 0.121...1.258 2 2...8 0.007...0.042 10...40 0.02...0.11 120...480 0.045...0.252 2880...11520 0.081...0.446 3 4...20 0.003...0.015 20...100 0.01...0.04 240...1200 0.022...0.091 5760...28800 0.040...0.162 4 6...44 0.0 30...220 0.0 360...2640 0.0 8640...63360 0.0These ranges should be sufficient in most cases. The minutes in the steps (ROI dict keys) are scaled linearly depending on the timeframe used. The ROI values in the steps (ROI dict values) are scaled logarithmically depending on the timeframe used.
If you have the generate_roi_table() and roi_space() methods in your custom hyperopt, remove them in order to utilize these adaptive ROI tables and the ROI hyperoptimization space generated by Freqtrade by default.
Override the roi_space() method if you need components of the ROI tables to vary in other ranges. Override the generate_roi_table() and roi_space() methods and implement your own custom approach for generation of the ROI tables during hyperoptimization if you need a different structure of the ROI tables or other amount of rows (steps).
A sample for these methods can be found in the overriding pre-defined spaces section.
Reduced search space
To limit the search space further, Decimals are limited to 3 decimal places (a precision of 0.001). This is usually sufficient, every value more precise than this will usually result in overfitted results. You can however overriding pre-defined spaces to change this to your needs.
"},{"location":"hyperopt/#understand-hyperopt-stoploss-results","title":"Understand Hyperopt Stoploss results","text":"If you are optimizing stoploss values (i.e. if optimization search-space contains 'all', 'default' or 'stoploss'), your result will look as follows and include stoploss:
Best result:\n\n 44/100: 135 trades. Avg profit 0.57%. Total profit 0.03871918 BTC (0.7722%). Avg duration 180.4 mins. Objective: 1.94367\n\n # Buy hyperspace params:\n buy_params = {\n 'buy_adx': 44,\n 'buy_rsi': 29,\n 'buy_adx_enabled': False,\n 'buy_rsi_enabled': True,\n 'buy_trigger': 'bb_lower'\n }\n\n stoploss: -0.27996\nIn order to use this best stoploss value found by Hyperopt in backtesting and for live trades/dry-run, copy-paste it as the value of the stoploss attribute of your custom strategy:
# Optimal stoploss designed for the strategy\n # This attribute will be overridden if the config file contains \"stoploss\"\n stoploss = -0.27996\nAs stated in the comment, you can also use it as the value of the stoploss setting in the configuration file.
If you are optimizing stoploss values, Freqtrade creates the 'stoploss' optimization hyperspace for you. By default, the stoploss values in that hyperspace vary in the range -0.35...-0.02, which is sufficient in most cases.
If you have the stoploss_space() method in your custom hyperopt file, remove it in order to utilize Stoploss hyperoptimization space generated by Freqtrade by default.
Override the stoploss_space() method and define the desired range in it if you need stoploss values to vary in other range during hyperoptimization. A sample for this method can be found in the overriding pre-defined spaces section.
Reduced search space
To limit the search space further, Decimals are limited to 3 decimal places (a precision of 0.001). This is usually sufficient, every value more precise than this will usually result in overfitted results. You can however overriding pre-defined spaces to change this to your needs.
"},{"location":"hyperopt/#understand-hyperopt-trailing-stop-results","title":"Understand Hyperopt Trailing Stop results","text":"If you are optimizing trailing stop values (i.e. if optimization search-space contains 'all' or 'trailing'), your result will look as follows and include trailing stop parameters:
Best result:\n\n 45/100: 606 trades. Avg profit 1.04%. Total profit 0.31555614 BTC ( 630.48%). Avg duration 150.3 mins. Objective: -1.10161\n\n # Trailing stop:\n trailing_stop = True\n trailing_stop_positive = 0.02001\n trailing_stop_positive_offset = 0.06038\n trailing_only_offset_is_reached = True\nIn order to use these best trailing stop parameters found by Hyperopt in backtesting and for live trades/dry-run, copy-paste them as the values of the corresponding attributes of your custom strategy:
# Trailing stop\n # These attributes will be overridden if the config file contains corresponding values.\n trailing_stop = True\n trailing_stop_positive = 0.02001\n trailing_stop_positive_offset = 0.06038\n trailing_only_offset_is_reached = True\nAs stated in the comment, you can also use it as the values of the corresponding settings in the configuration file.
"},{"location":"hyperopt/#default-trailing-stop-search-space","title":"Default Trailing Stop Search Space","text":"If you are optimizing trailing stop values, Freqtrade creates the 'trailing' optimization hyperspace for you. By default, the trailing_stop parameter is always set to True in that hyperspace, the value of the trailing_only_offset_is_reached vary between True and False, the values of the trailing_stop_positive and trailing_stop_positive_offset parameters vary in the ranges 0.02...0.35 and 0.01...0.1 correspondingly, which is sufficient in most cases.
Override the trailing_space() method and define the desired range in it if you need values of the trailing stop parameters to vary in other ranges during hyperoptimization. A sample for this method can be found in the overriding pre-defined spaces section.
Reduced search space
To limit the search space further, Decimals are limited to 3 decimal places (a precision of 0.001). This is usually sufficient, every value more precise than this will usually result in overfitted results. You can however overriding pre-defined spaces to change this to your needs.
"},{"location":"hyperopt/#reproducible-results","title":"Reproducible results","text":"The search for optimal parameters starts with a few (currently 30) random combinations in the hyperspace of parameters, random Hyperopt epochs. These random epochs are marked with an asterisk character (*) in the first column in the Hyperopt output.
The initial state for generation of these random values (random state) is controlled by the value of the --random-state command line option. You can set it to some arbitrary value of your choice to obtain reproducible results.
If you have not set this value explicitly in the command line options, Hyperopt seeds the random state with some random value for you. The random state value for each Hyperopt run is shown in the log, so you can copy and paste it into the --random-state command line option to repeat the set of the initial random epochs used.
If you have not changed anything in the command line options, configuration, timerange, Strategy and Hyperopt classes, historical data and the Loss Function -- you should obtain same hyper-optimization results with same random state value used.
"},{"location":"hyperopt/#output-formatting","title":"Output formatting","text":"By default, hyperopt prints colorized results -- epochs with positive profit are printed in the green color. This highlighting helps you find epochs that can be interesting for later analysis. Epochs with zero total profit or with negative profits (losses) are printed in the normal color. If you do not need colorization of results (for instance, when you are redirecting hyperopt output to a file) you can switch colorization off by specifying the --no-color option in the command line.
You can use the --print-all command line option if you would like to see all results in the hyperopt output, not only the best ones. When --print-all is used, current best results are also colorized by default -- they are printed in bold (bright) style. This can also be switched off with the --no-color command line option.
Windows and color output
Windows does not support color-output natively, therefore it is automatically disabled. To have color-output for hyperopt running under windows, please consider using WSL.
"},{"location":"hyperopt/#position-stacking-and-disabling-max-market-positions","title":"Position stacking and disabling max market positions","text":"In some situations, you may need to run Hyperopt (and Backtesting) with the --eps/--enable-position-staking argument, or you may need to set max_open_trades to a very high number to disable the limit on the number of open trades.
By default, hyperopt emulates the behavior of the Freqtrade Live Run/Dry Run, where only one open trade per pair is allowed. The total number of trades open for all pairs is also limited by the max_open_trades setting. During Hyperopt/Backtesting this may lead to potential trades being hidden (or masked) by already open trades.
The --eps/--enable-position-stacking argument allows emulation of buying the same pair multiple times. Using --max-open-trades with a very high number will disable the limit on the number of open trades.
Note
Dry/live runs will NOT use position stacking - therefore it does make sense to also validate the strategy without this as it's closer to reality.
You can also enable position stacking in the configuration file by explicitly setting \"position_stacking\"=true.
As hyperopt consumes a lot of memory (the complete data needs to be in memory once per parallel backtesting process), it's likely that you run into \"out of memory\" errors. To combat these, you have multiple options:
--timerange <timerange>).--timeframe-detail (this loads a lot of additional data into memory).-j <n>).--analyze-per-epoch if you're using a lot of parameters with .range functionality.If you see The objective has been evaluated at this point before. - then this is a sign that your space has been exhausted, or is close to that. Basically all points in your space have been hit (or a local minima has been hit) - and hyperopt does no longer find points in the multi-dimensional space it did not try yet. Freqtrade tries to counter the \"local minima\" problem by using new, randomized points in this case.
Example:
buy_ema_short = IntParameter(5, 20, default=10, space=\"buy\", optimize=True)\n# This is the only parameter in the buy space\nThe buy_ema_short space has 15 possible values (5, 6, ... 19, 20). If you now run hyperopt for the buy space, hyperopt will only have 15 values to try before running out of options. Your epochs should therefore be aligned to the possible values - or you should be ready to interrupt a run if you norice a lot of The objective has been evaluated at this point before. warnings.
After you run Hyperopt for the desired amount of epochs, you can later list all results for analysis, select only best or profitable once, and show the details for any of the epochs previously evaluated. This can be done with the hyperopt-list and hyperopt-show sub-commands. The usage of these sub-commands is described in the Utils chapter.
If you want to output debug messages from your strategy, you can use the logging module. By default, Freqtrade will output all messages with a level of INFO or higher.
import logging\n\n\nlogger = logging.getLogger(__name__)\n\n\nclass MyAwesomeStrategy(IStrategy):\n ...\n\n def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n logger.info(\"This is a debug message\")\n ...\nusing print
Messages printed via print() will not be shown in the hyperopt output unless parallelism is disabled (-j 1). It is recommended to use the logging module instead.
Once the optimized strategy has been implemented into your strategy, you should backtest this strategy to make sure everything is working as expected.
To achieve same the results (number of trades, their durations, profit, etc.) as during Hyperopt, please use the same configuration and parameters (timerange, timeframe, ...) used for hyperopt for Backtesting.
"},{"location":"hyperopt/#why-do-my-backtest-results-not-match-my-hyperopt-results","title":"Why do my backtest results not match my hyperopt results?","text":"Should results not match, check the following factors:
populate_indicators() where they will be calculated only once for all epochs. If you are, for example, trying to optimise multiple SMA timeperiod values, the hyperoptable timeperiod parameter should be placed in populate_entry_trend() which is calculated every epoch. See Optimizing an indicator parameter.stoploss, max_open_trades or trailing_stop).--space protection, protections are auto-enabled for hyperopting.This page explains how to prepare your environment for running the bot.
The freqtrade documentation describes various ways to install freqtrade
Please consider using the prebuilt docker images to get started quickly while evaluating how freqtrade works.
"},{"location":"installation/#information","title":"Information","text":"For Windows installation, please use the windows installation guide.
The easiest way to install and run Freqtrade is to clone the bot Github repository and then run the ./setup.sh script, if it's available for your platform.
Version considerations
When cloning the repository the default working branch has the name develop. This branch contains all last features (can be considered as relatively stable, thanks to automated tests). The stable branch contains the code of the last release (done usually once per month on an approximately one week old snapshot of the develop branch to prevent packaging bugs, so potentially it's more stable).
Note
Python3.11 or higher and the corresponding pip are assumed to be available. The install-script will warn you and stop if that's not the case. git is also needed to clone the Freqtrade repository. Also, python headers (python<yourversion>-dev / python<yourversion>-devel) must be available for the installation to complete successfully.
Up-to-date clock
The clock on the system running the bot must be accurate, synchronized to a NTP server frequently enough to avoid problems with communication to the exchanges.
"},{"location":"installation/#requirements","title":"Requirements","text":"These requirements apply to both Script Installation and Manual Installation.
ARM64 systems
If you are running an ARM64 system (like a MacOS M1 or an Oracle VM), please use docker to run freqtrade. While native installation is possible with some manual effort, this is not supported at the moment.
"},{"location":"installation/#install-guide","title":"Install guide","text":"We've included/collected install instructions for Ubuntu, MacOS, and Windows. These are guidelines and your success may vary with other distros. OS Specific steps are listed first, the common section below is necessary for all systems.
Note
Python3.11 or higher and the corresponding pip are assumed to be available.
Debian/UbuntuMacOSRaspberryPi/RaspbianThe following assumes the latest Raspbian Buster lite image. This image comes with python3.11 preinstalled, making it easy to get freqtrade up and running.
Tested using a Raspberry Pi 3 with the Raspbian Buster lite image, all updates applied.
sudo apt-get install python3-venv libatlas-base-dev cmake curl libffi-dev\n# Use piwheels.org to speed up installation\nsudo echo \"[global]\\nextra-index-url=https://www.piwheels.org/simple\" > tee /etc/pip.conf\n\ngit clone https://github.com/freqtrade/freqtrade.git\ncd freqtrade\n\nbash setup.sh -i\nInstallation duration
Depending on your internet speed and the Raspberry Pi version, installation can take multiple hours to complete. Due to this, we recommend to use the pre-build docker-image for Raspberry, by following the Docker quickstart documentation
Note
The above does not install hyperopt dependencies. To install these, please use python3 -m pip install -e .[hyperopt]. We do not advise to run hyperopt on a Raspberry Pi, since this is a very resource-heavy operation, which should be done on powerful machine.
# update repository\nsudo apt-get update\n\n# install packages\nsudo apt install -y python3-pip python3-venv python3-dev python3-pandas git curl\nInstall Homebrew if you don't have it already.
# install packages\nbrew install gettext libomp\nNote
The setup.sh script will install these dependencies for you - assuming brew is installed on your system.
Freqtrade is an open source crypto-currency trading bot, whose code is hosted on github.com
# Download `develop` branch of freqtrade repository\ngit clone https://github.com/freqtrade/freqtrade.git\n\n# Enter downloaded directory\ncd freqtrade\n\n# your choice (1): novice user\ngit checkout stable\n\n# your choice (2): advanced user\ngit checkout develop\n(1) This command switches the cloned repository to the use of the stable branch. It's not needed, if you wish to stay on the (2) develop branch.
You may later switch between branches at any time with the git checkout stable/git checkout develop commands.
An alternative way to install Freqtrade is from pypi. The downside is that this method requires ta-lib to be correctly installed beforehand, and is therefore currently not the recommended way to install Freqtrade.
pip install freqtrade\nFirst of the ways to install Freqtrade, is to use provided the Linux/MacOS ./setup.sh script, which install all dependencies and help you configure the bot.
Make sure you fulfill the Requirements and have downloaded the Freqtrade repository.
"},{"location":"installation/#use-setupsh-install-linuxmacos","title":"Use /setup.sh -install (Linux/MacOS)","text":"If you are on Debian, Ubuntu or MacOS, freqtrade provides the script to install freqtrade.
# --install, Install freqtrade from scratch\n./setup.sh -i\nEach time you open a new terminal, you must run source .venv/bin/activate to activate your virtual environment.
# activate virtual environment\nsource ./.venv/bin/activate\nYou are now ready to run the bot.
"},{"location":"installation/#other-options-of-setupsh-script","title":"Other options of /setup.sh script","text":"You can as well update, configure and reset the codebase of your bot with ./script.sh
# --update, Command git pull to update.\n./setup.sh -u\n# --reset, Hard reset your develop/stable branch.\n./setup.sh -r\n** --install **\n\nWith this option, the script will install the bot and most dependencies:\nYou will need to have git and python3.11+ installed beforehand for this to work.\n\n* Mandatory software as: `ta-lib`\n* Setup your virtualenv under `.venv/`\n\nThis option is a combination of installation tasks and `--reset`\n\n** --update **\n\nThis option will pull the last version of your current branch and update your virtualenv. Run the script with this option periodically to update your bot.\n\n** --reset **\n\nThis option will hard reset your branch (only if you are on either `stable` or `develop`) and recreate your virtualenv.\nMake sure you fulfill the Requirements and have downloaded the Freqtrade repository.
"},{"location":"installation/#setup-python-virtual-environment-virtualenv","title":"Setup Python virtual environment (virtualenv)","text":"You will run freqtrade in separated virtual environment
# create virtualenv in directory /freqtrade/.venv\npython3 -m venv .venv\n\n# run virtualenv\nsource .venv/bin/activate\npython3 -m pip install --upgrade pip\npython3 -m pip install -r requirements.txt\n# install freqtrade\npython3 -m pip install -e .\nYou are now ready to run the bot.
"},{"location":"installation/#optional-post-installation-tasks","title":"(Optional) Post-installation Tasks","text":"Note
If you run the bot on a server, you should consider using Docker or a terminal multiplexer like screen or tmux to avoid that the bot is stopped on logout.
On Linux with software suite systemd, as an optional post-installation task, you may wish to setup the bot to run as a systemd service or configure it to send the log messages to the syslog/rsyslog or journald daemons. See Advanced Logging for details.
Freqtrade can also be installed with Miniconda or Anaconda. We recommend using Miniconda as it's installation footprint is smaller. Conda will automatically prepare and manage the extensive library-dependencies of the Freqtrade program.
"},{"location":"installation/#what-is-conda","title":"What is Conda?","text":"Conda is a package, dependency and environment manager for multiple programming languages: conda docs
"},{"location":"installation/#installation-with-conda_1","title":"Installation with conda","text":""},{"location":"installation/#install-conda","title":"Install Conda","text":"Installing on linux
Installing on windows
Answer all questions. After installation, it is mandatory to turn your terminal OFF and ON again.
"},{"location":"installation/#freqtrade-download","title":"Freqtrade download","text":"Download and install freqtrade.
# download freqtrade\ngit clone https://github.com/freqtrade/freqtrade.git\n\n# enter downloaded directory 'freqtrade'\ncd freqtrade \nconda create --name freqtrade python=3.12\nCreating Conda Environment
The conda command create -n automatically installs all nested dependencies for the selected libraries, general structure of installation command is:
# choose your own packages\nconda env create -n [name of the environment] [python version] [packages]\nTo check available environments, type
conda env list\nEnter installed environment
# enter conda environment\nconda activate freqtrade\n\n# exit conda environment - don't do it now\nconda deactivate\nInstall last python dependencies with pip
python3 -m pip install --upgrade pip\npython3 -m pip install -r requirements.txt\npython3 -m pip install -e .\nYou are now ready to run the bot.
"},{"location":"installation/#important-shortcuts","title":"Important shortcuts","text":"# list installed conda environments\nconda env list\n\n# activate base environment\nconda activate\n\n# activate freqtrade environment\nconda activate freqtrade\n\n#deactivate any conda environments\nconda deactivate \nNew heavy packages
It may happen that creating a new Conda environment, populated with selected packages at the moment of creation takes less time than installing a large, heavy library or application, into previously set environment.
pip install within conda
The documentation of conda says that pip should NOT be used within conda, because internal problems can occur. However, they are rare. Anaconda Blogpost
Nevertheless, that is why, the conda-forge channel is preferred:
pip)conda-forge works better with pipHappy trading!
"},{"location":"installation/#you-are-ready","title":"You are ready","text":"You've made it this far, so you have successfully installed freqtrade.
"},{"location":"installation/#initialize-the-configuration","title":"Initialize the configuration","text":"# Step 1 - Initialize user folder\nfreqtrade create-userdir --userdir user_data\n\n# Step 2 - Create a new configuration file\nfreqtrade new-config --config user_data/config.json\nYou are ready to run, read Bot Configuration, remember to start with dry_run: True and verify that everything is working.
To learn how to setup your configuration, please refer to the Bot Configuration documentation page.
"},{"location":"installation/#start-the-bot","title":"Start the Bot","text":"freqtrade trade --config user_data/config.json --strategy SampleStrategy\nWarning
You should read through the rest of the documentation, backtest the strategy you're going to use, and use dry-run before enabling trading with real money.
"},{"location":"installation/#troubleshooting","title":"Troubleshooting","text":""},{"location":"installation/#common-problem-command-not-found","title":"Common problem: \"command not found\"","text":"If you used (1)Script or (2)Manual installation, you need to run the bot in virtual environment. If you get error as below, make sure venv is active.
# if:\nbash: freqtrade: command not found\n\n# then activate your virtual environment\nsource ./.venv/bin/activate\nNewer versions of MacOS may have installation failed with errors like error: command 'g++' failed with exit status 1.
This error will require explicit installation of the SDK Headers, which are not installed by default in this version of MacOS. For MacOS 10.14, this can be accomplished with the below command.
open /Library/Developer/CommandLineTools/Packages/macOS_SDK_headers_for_macOS_10.14.pkg\nIf this file is inexistent, then you're probably on a different version of MacOS, so you may need to consult the internet for specific resolution details.
"},{"location":"leverage/","title":"Trading with Leverage","text":"Beta feature
This feature is still in it's testing phase. Should you notice something you think is wrong please let us know via Discord or via Github Issue.
Multiple bots on one account
You can't run 2 bots on the same account with leverage. For leveraged / margin trading, freqtrade assumes it's the only user of the account, and all liquidation levels are calculated based on this assumption.
Trading with leverage is very risky
Do not trade with a leverage > 1 using a strategy that hasn't shown positive results in a live run using the spot market. Check the stoploss of your strategy. With a leverage of 2, a stoploss of 0.5 (50%) would be too low, and these trades would be liquidated before reaching that stoploss. We do not assume any responsibility for eventual losses that occur from using this software or this mode.
Please only use advanced trading modes when you know how freqtrade (and your strategy) works. Also, never risk more than what you can afford to lose.
If you already have an existing strategy, please read the strategy migration guide to migrate your strategy from a freqtrade v2 strategy, to strategy of version 3 which can short and trade futures.
"},{"location":"leverage/#shorting","title":"Shorting","text":"Shorting is not possible when trading with trading_mode set to spot. To short trade, trading_mode must be set to margin(currently unavailable) or futures, with margin_mode set to cross(currently unavailable) or isolated
For a strategy to short, the strategy class must set the class variable can_short = True
Please read strategy customization for instructions on how to set signals to enter and exit short trades.
"},{"location":"leverage/#understand-trading_mode","title":"Understandtrading_mode","text":"The possible values are: spot (default), margin(Currently unavailable) or futures.
Regular trading mode (low risk)
With leverage, a trader borrows capital from the exchange. The capital must be re-payed fully to the exchange (potentially with interest), and the trader keeps any profits, or pays any losses, from any trades made using the borrowed capital.
Because the capital must always be re-payed, exchanges will liquidate (forcefully sell the traders assets) a trade made using borrowed capital when the total value of assets in the leverage account drops to a certain point (a point where the total value of losses is less than the value of the collateral that the trader actually owns in the leverage account), in order to ensure that the trader has enough capital to pay the borrowed assets back to the exchange. The exchange will also charge a liquidation fee, adding to the traders losses.
For this reason, DO NOT TRADE WITH LEVERAGE IF YOU DON'T KNOW EXACTLY WHAT YOUR DOING. LEVERAGE TRADING IS HIGH RISK, AND CAN RESULT IN THE VALUE OF YOUR ASSETS DROPPING TO 0 VERY QUICKLY, WITH NO CHANCE OF INCREASING IN VALUE AGAIN.
"},{"location":"leverage/#margin-currently-unavailable","title":"Margin (currently unavailable)","text":"Trading occurs on the spot market, but the exchange lends currency to you in an amount equal to the chosen leverage. You pay the amount lent to you back to the exchange with interest, and your profits/losses are multiplied by the leverage specified.
"},{"location":"leverage/#futures","title":"Futures","text":"Perpetual swaps (also known as Perpetual Futures) are contracts traded at a price that is closely tied to the underlying asset they are based off of (ex.). You are not trading the actual asset but instead are trading a derivative contract. Perpetual swap contracts can last indefinitely, in contrast to futures or option contracts.
In addition to the gains/losses from the change in price of the futures contract, traders also exchange funding fees, which are gains/losses worth an amount that is derived from the difference in price between the futures contract and the underlying asset. The difference in price between a futures contract and the underlying asset varies between exchanges.
To trade in futures markets, you'll have to set trading_mode to \"futures\". You will also have to pick a \"margin mode\" (explanation below) - with freqtrade currently only supporting isolated margin.
\"trading_mode\": \"futures\",\n\"margin_mode\": \"isolated\"\nFreqtrade follows the ccxt naming conventions for futures. A futures pair will therefore have the naming of base/quote:settle (e.g. ETH/USDT:USDT).
On top of trading_mode - you will also have to configure your margin_mode. While freqtrade currently only supports one margin mode, this will change, and by configuring it now you're all set for future updates.
The possible values are: isolated, or cross(currently unavailable).
Each market(trading pair), keeps collateral in a separate account
\"margin_mode\": \"isolated\"\nOne account is used to share collateral between markets (trading pairs). Margin is taken from total account balance to avoid liquidation when needed.
\"margin_mode\": \"cross\"\nPlease read the exchange specific notes for exchanges that support this mode and how they differ.
"},{"location":"leverage/#set-leverage-to-use","title":"Set leverage to use","text":"Different strategies and risk profiles will require different levels of leverage. While you could configure one static leverage value - freqtrade offers you the flexibility to adjust this via strategy leverage callback - which allows you to use different leverages by pair, or based on some other factor benefitting your strategy result.
If not implemented, leverage defaults to 1x (no leverage).
Warning
Higher leverage also equals higher risk - be sure you fully understand the implications of using leverage!
"},{"location":"leverage/#understand-liquidation_buffer","title":"Understandliquidation_buffer","text":"Defaults to 0.05
A ratio specifying how large of a safety net to place between the liquidation price and the stoploss to prevent a position from reaching the liquidation price. This artificial liquidation price is calculated as:
freqtrade_liquidation_price = liquidation_price \u00b1 (abs(open_rate - liquidation_price) * liquidation_buffer)
\u00b1 = + for long trades\u00b1 = - for short tradesPossible values are any floats between 0.0 and 0.99
ex: If a trade is entered at a price of 10 coin/USDT, and the liquidation price of this trade is 8 coin/USDT, then with liquidation_buffer set to 0.05 the minimum stoploss for this trade would be \\(8 + ((10 - 8) * 0.05) = 8 + 0.1 = 8.1\\)
A liquidation_buffer of 0.0, or a low liquidation_buffer is likely to result in liquidations, and liquidation fees
Currently Freqtrade is able to calculate liquidation prices, but does not calculate liquidation fees. Setting your liquidation_buffer to 0.0, or using a low liquidation_buffer could result in your positions being liquidated. Freqtrade does not track liquidation fees, so liquidations will result in inaccurate profit/loss results for your bot. If you use a low liquidation_buffer, it is recommended to use stoploss_on_exchange if your exchange supports this.
For futures data, exchanges commonly provide the futures candles, the marks, and the funding rates. However, it is common that whilst candles and marks might be available, the funding rates are not. This can affect backtesting timeranges, i.e. you may only be able to test recent timeranges and not earlier, experiencing the No data found. Terminating. error. To get around this, add the futures_funding_rate config option as listed in configuration.md, and it is recommended that you set this to 0, unless you know a given specific funding rate for your pair, exchange and timerange. Setting this to anything other than 0 can have drastic effects on your profit calculations within strategy, e.g. within the custom_exit, custom_stoploss, etc functions.
This will mean your backtests are inaccurate.
This will not overwrite funding rates that are available from the exchange, but bear in mind that setting a false funding rate will mean backtesting results will be inaccurate for historical timeranges where funding rates are not available.
"},{"location":"leverage/#developer","title":"Developer","text":""},{"location":"leverage/#margin-mode_1","title":"Margin mode","text":"For shorts, the currency which pays the interest fee for the borrowed currency is purchased at the same time of the closing trade (This means that the amount purchased in short closing trades is greater than the amount sold in short opening trades).
For longs, the currency which pays the interest fee for the borrowed will already be owned by the user and does not need to be purchased. The interest is subtracted from the close_value of the trade.
All Fees are included in current_profit calculations during the trade.
Funding fees are either added or subtracted from the total amount of a trade
"},{"location":"lookahead-analysis/","title":"Lookahead analysis","text":"This page explains how to validate your strategy in terms of lookahead bias.
Lookahead bias is the bane of any strategy since it is sometimes very easy to introduce this bias, but can be very hard to detect.
Backtesting initializes all timestamps (loads the whole dataframe into memory) and calculates all indicators at once. This means that if your indicators or entry/exit signals look into future candles, this will falsify your backtest.
The lookahead-analysis command requires historic data to be available. To learn how to get data for the pairs and exchange you're interested in, head over to the Data Downloading section of the documentation. lookahead-analysis also supports freqai strategies.
This command internally chains backtests and pokes at the strategy to provoke it to show lookahead bias. This is done by not looking at the strategy code itself, but at changed indicator values and moved entries/exits compared to the full backtest.
lookahead-analysis can use the typical options of Backtesting, but forces the following options:
--cache is forced to \"none\".--max-open-trades is forced to be at least equal to the number of pairs.--dry-run-wallet is forced to be basically infinite (1 billion).--stake-amount is forced to be a static 10000 (10k).--enable-protections is forced to be off.order_types are forced to be \"market\" (late entries) unless --lookahead-allow-limit-orders is set.These are set to avoid users accidentally generating false positives.
"},{"location":"lookahead-analysis/#lookahead-analysis-command-reference","title":"Lookahead-analysis command reference","text":"usage: freqtrade lookahead-analysis [-h] [-v] [--no-color] [--logfile FILE]\n [-V] [-c PATH] [-d PATH] [--userdir PATH]\n [-s NAME] [--strategy-path PATH]\n [--recursive-strategy-search]\n [--freqaimodel NAME]\n [--freqaimodel-path PATH] [-i TIMEFRAME]\n [--timerange TIMERANGE]\n [--data-format-ohlcv {json,jsongz,feather,parquet}]\n [--max-open-trades INT]\n [--stake-amount STAKE_AMOUNT]\n [--fee FLOAT] [-p PAIRS [PAIRS ...]]\n [--enable-protections]\n [--enable-dynamic-pairlist]\n [--dry-run-wallet DRY_RUN_WALLET]\n [--timeframe-detail TIMEFRAME_DETAIL]\n [--strategy-list STRATEGY_LIST [STRATEGY_LIST ...]]\n [--export {none,trades,signals}]\n [--backtest-filename PATH]\n [--backtest-directory PATH]\n [--freqai-backtest-live-models]\n [--minimum-trade-amount INT]\n [--targeted-trade-amount INT]\n [--lookahead-analysis-exportfilename LOOKAHEAD_ANALYSIS_EXPORTFILENAME]\n [--allow-limit-orders]\n\noptions:\n -h, --help show this help message and exit\n -i TIMEFRAME, --timeframe TIMEFRAME\n Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).\n --timerange TIMERANGE\n Specify what timerange of data to use.\n --data-format-ohlcv {json,jsongz,feather,parquet}\n Storage format for downloaded candle (OHLCV) data.\n (default: `feather`).\n --max-open-trades INT\n Override the value of the `max_open_trades`\n configuration setting.\n --stake-amount STAKE_AMOUNT\n Override the value of the `stake_amount` configuration\n setting.\n --fee FLOAT Specify fee ratio. Will be applied twice (on trade\n entry and exit).\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --enable-protections, --enableprotections\n Enable protections for backtesting. Will slow\n backtesting down by a considerable amount, but will\n include configured protections\n --enable-dynamic-pairlist\n Enables dynamic pairlist refreshes in backtesting. The\n pairlist will be generated for each new candle if\n you're using a pairlist handler that supports this\n feature, for example, ShuffleFilter.\n --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET\n Starting balance, used for backtesting / hyperopt and\n dry-runs.\n --timeframe-detail TIMEFRAME_DETAIL\n Specify detail timeframe for backtesting (`1m`, `5m`,\n `30m`, `1h`, `1d`).\n --strategy-list STRATEGY_LIST [STRATEGY_LIST ...]\n Provide a space-separated list of strategies to\n backtest. Please note that timeframe needs to be set\n either in config or via command line. When using this\n together with `--export trades`, the strategy-name is\n injected into the filename (so `backtest-data.json`\n becomes `backtest-data-SampleStrategy.json`\n --export {none,trades,signals}\n Export backtest results (default: trades).\n --backtest-filename PATH, --export-filename PATH\n Use this filename for backtest results.Example:\n `--backtest-\n filename=backtest_results_2020-09-27_16-20-48.json`.\n Assumes either `user_data/backtest_results/` or\n `--export-directory` as base directory.\n --backtest-directory PATH, --export-directory PATH\n Directory to use for backtest results. Example:\n `--export-directory=user_data/backtest_results/`.\n --freqai-backtest-live-models\n Run backtest with ready models.\n --minimum-trade-amount INT\n Minimum trade amount for lookahead-analysis\n --targeted-trade-amount INT\n Targeted trade amount for lookahead analysis\n --lookahead-analysis-exportfilename LOOKAHEAD_ANALYSIS_EXPORTFILENAME\n Use this csv-filename to store lookahead-analysis-\n results\n --allow-limit-orders Allow limit orders in lookahead analysis (could cause\n false positives in lookahead analysis results).\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n\nStrategy arguments:\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n --freqaimodel NAME Specify a custom freqaimodels.\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\nNote
The above output was reduced to options that lookahead-analysis adds on top of regular backtesting commands.
Many strategies, without the programmer knowing, have fallen prey to lookahead bias. This typically makes the strategy backtest look profitable, sometimes to extremes, but this is not realistic as the strategy is \"cheating\" by looking at data it would not have in dry or live modes.
The reason why strategies can \"cheat\" is because the freqtrade backtesting process populates the full dataframe including all candle timestamps at the outset. If the programmer is not careful or oblivious how things work internally (which sometimes can be really hard to find out) then the strategy will look into the future.
This command is made to try to verify the validity in the form of the aforementioned lookahead bias.
"},{"location":"lookahead-analysis/#how-does-the-command-work","title":"How does the command work?","text":"It will start with a backtest of all pairs to generate a baseline for indicators and entries/exits. After this initial backtest runs, it will look if the minimum-trade-amount is met and if not cancel the lookahead-analysis for this strategy. If this happens, use a wider timerange to get more trades for the analysis, or use a timerange where more trades occur.
After setting the baseline it will then do additional backtest runs for every entry and exit separately. When these verification backtests complete, it will compare both dataframes (baseline and sliced) for any difference in columns' value and report the bias. After all signals have been verified or falsified a result table will be generated for the user to see.
"},{"location":"lookahead-analysis/#how-to-find-and-remove-bias-how-can-i-salvage-a-biased-strategy","title":"How to find and remove bias? How can I salvage a biased strategy?","text":"If you found a biased strategy online and want to have the same results, just without bias, then you will be out of luck most of the time. Usually the bias in the strategy is THE driving factor for \"too good to be true\" profits. Removing conditions or indicators that push the profits up from bias will usually make the strategy significantly worse. You might be able to salvage it partially if the biased indicators or conditions are not the core of the strategy, or there are other entry and exit signals that are not biased.
"},{"location":"lookahead-analysis/#examples-of-lookahead-bias","title":"Examples of lookahead-bias","text":"shift(-10) looks 10 candles into the future.iloc[] in populate_* functions to access a specific row in the dataframe..mean(), .min() and .max(), without a rolling window, will calculate the value over the whole dataframe, so the signal candle will \"see\" a value including future candles. A non-biased example would be to look back candles using rolling() instead: e.g. dataframe['volume_mean_12'] = dataframe['volume'].rolling(12).mean()ta.MACD(dataframe, 12, 26, 1) will introduce bias with a signalperiod of 1.filename: name of the checked strategy filestrategy: checked strategy class namehas_bias: result of the lookahead-analysis. No would be good, Yes would be bad.total_signals: number of checked signals (default is 20)biased_entry_signals: found bias in that many entriesbiased_exit_signals: found bias in that many exitsbiased_indicators: shows you the indicators themselves that are defined in populate_indicatorsYou might get false positives in the biased_exit_signals if you have biased entry signals paired with those exits. However, a biased entry will usually result in a biased exit too, even if the exit itself does not produce the bias - especially if your entry and exit conditions use the same biased indicator.
Address the bias in the entries first, then address the exits.
"},{"location":"lookahead-analysis/#caveats","title":"Caveats","text":"lookahead-analysis can only verify / falsify the trades it calculated and verified. If the strategy has many different signals / signal types, it's up to you to select appropriate parameters to ensure that all signals have triggered at least once. Signals that are not triggered will not have been verified. This would lead to a false-negative, i.e. the strategy will be reported as non-biased.lookahead-analysis has access to the same backtesting options and this can introduce problems. Please don't use any options like enabling position stacking as this will distort the number of checked signals. If you decide to do so, then make doubly sure that you won't ever run out of max_open_trades slots, and that you have enough capital in the backtest wallet configuration.custom_entry_price() and custom_exit_price() callbacks can cause late / delayed entries and exists, causing false positives. To avoid this - market orders are forced for this command. This implicitly means that custom_entry_price() and custom_exit_price() callbacks are not called. Using --lookahead-allow-limit-orders will skip the override and use your configured order types - however has shown to eventually produce false positives.biased_indicators column will falsely flag FreqAI target indicators defined in set_freqai_targets() as biased. These are not biased and can safely be ignored.This page explains how to plot prices, indicators and profits.
Deprecated
The commands described in this page (plot-dataframe, plot-profit) should be considered deprecated and are in maintenance mode. This is mostly for the performance problems even medium sized plots can cause, but also because \"store a file and open it in a browser\" isn't very intuitive from a UI perspective.
While there are no immediate plans to remove them, they are not actively maintained - and may be removed short-term should major changes be required to keep them working.
Please use FreqUI for plotting needs, which doesn't struggle with the same performance problems.
"},{"location":"plotting/#installation-setup","title":"Installation / Setup","text":"Plotting modules use the Plotly library. You can install / upgrade this by running the following command:
pip install -U -r requirements-plot.txt\nThe freqtrade plot-dataframe subcommand shows an interactive graph with three subplots:
--indicators2Possible arguments:
usage: freqtrade plot-dataframe [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH] [-s NAME]\n [--strategy-path PATH]\n [--recursive-strategy-search]\n [--freqaimodel NAME] [--freqaimodel-path PATH]\n [-p PAIRS [PAIRS ...]]\n [--indicators1 INDICATORS1 [INDICATORS1 ...]]\n [--indicators2 INDICATORS2 [INDICATORS2 ...]]\n [--plot-limit INT] [--db-url PATH]\n [--trade-source {DB,file}]\n [--export {none,trades,signals}]\n [--backtest-filename PATH]\n [--timerange TIMERANGE] [-i TIMEFRAME]\n [--no-trades]\n\noptions:\n -h, --help show this help message and exit\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --indicators1 INDICATORS1 [INDICATORS1 ...]\n Set indicators from your strategy you want in the\n first row of the graph. Space-separated list. Example:\n `ema3 ema5`. Default: `['sma', 'ema3', 'ema5']`.\n --indicators2 INDICATORS2 [INDICATORS2 ...]\n Set indicators from your strategy you want in the\n third row of the graph. Space-separated list. Example:\n `fastd fastk`. Default: `['macd', 'macdsignal']`.\n --plot-limit INT Specify tick limit for plotting. Notice: too high\n values cause huge files. Default: 750.\n --db-url PATH Override trades database URL, this is useful in custom\n deployments (default: `sqlite:///tradesv3.sqlite` for\n Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for\n Dry Run).\n --trade-source {DB,file}\n Specify the source for trades (Can be DB or file\n (backtest file)) Default: file\n --export {none,trades,signals}\n Export backtest results (default: trades).\n --backtest-filename PATH, --export-filename PATH\n Use this filename for backtest results.Example:\n `--backtest-\n filename=backtest_results_2020-09-27_16-20-48.json`.\n Assumes either `user_data/backtest_results/` or\n `--export-directory` as base directory.\n --timerange TIMERANGE\n Specify what timerange of data to use.\n -i TIMEFRAME, --timeframe TIMEFRAME\n Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).\n --no-trades Skip using trades from backtesting file and DB.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n\nStrategy arguments:\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n --freqaimodel NAME Specify a custom freqaimodels.\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\nExample:
freqtrade plot-dataframe -p BTC/ETH --strategy AwesomeStrategy\nThe -p/--pairs argument can be used to specify pairs you would like to plot.
Note
The freqtrade plot-dataframe subcommand generates one plot-file per pair.
Specify custom indicators. Use --indicators1 for the main plot and --indicators2 for the subplot below (if values are in a different range than prices).
freqtrade plot-dataframe --strategy AwesomeStrategy -p BTC/ETH --indicators1 sma ema --indicators2 macd\nTo plot multiple pairs, separate them with a space:
freqtrade plot-dataframe --strategy AwesomeStrategy -p BTC/ETH XRP/ETH\nTo plot a timerange (to zoom in)
freqtrade plot-dataframe --strategy AwesomeStrategy -p BTC/ETH --timerange=20180801-20180805\nTo plot trades stored in a database use --db-url in combination with --trade-source DB:
freqtrade plot-dataframe --strategy AwesomeStrategy --db-url sqlite:///tradesv3.dry_run.sqlite -p BTC/ETH --trade-source DB\nTo plot trades from a backtesting result, use --export-filename <filename>
freqtrade plot-dataframe --strategy AwesomeStrategy --export-filename user_data/backtest_results/backtest-result.json -p BTC/ETH\nThe plot-dataframe subcommand requires backtesting data, a strategy and either a backtesting-results file or a database, containing trades corresponding to the strategy.
The resulting plot will have the following elements:
--indicators1.--indicators2.Bollinger Bands
Bollinger bands are automatically added to the plot if the columns bb_lowerband and bb_upperband exist, and are painted as a light blue area spanning from the lower band to the upper band.
An advanced plot configuration can be specified in the strategy in the plot_config parameter.
Additional features when using plot_config include:
The sample plot configuration below specifies fixed colors for the indicators. Otherwise, consecutive plots may produce different color schemes each time, making comparisons difficult. It also allows multiple subplots to display both MACD and RSI at the same time.
Plot type can be configured using type key. Possible types are:
scatter corresponding to plotly.graph_objects.Scatter class (default).bar corresponding to plotly.graph_objects.Bar class.Extra parameters to plotly.graph_objects.* constructor can be specified in plotly dict.
Sample configuration with inline comments explaining the process:
@property\ndef plot_config(self):\n \"\"\"\n There are a lot of solutions how to build the return dictionary.\n The only important point is the return value.\n Example:\n plot_config = {'main_plot': {}, 'subplots': {}}\n\n \"\"\"\n plot_config = {}\n plot_config['main_plot'] = {\n # Configuration for main plot indicators.\n # Assumes 2 parameters, emashort and emalong to be specified.\n f'ema_{self.emashort.value}': {'color': 'red'},\n f'ema_{self.emalong.value}': {'color': '#CCCCCC'},\n # By omitting color, a random color is selected.\n 'sar': {},\n # fill area between senkou_a and senkou_b\n 'senkou_a': {\n 'color': 'green', #optional\n 'fill_to': 'senkou_b',\n 'fill_label': 'Ichimoku Cloud', #optional\n 'fill_color': 'rgba(255,76,46,0.2)', #optional\n },\n # plot senkou_b, too. Not only the area to it.\n 'senkou_b': {}\n }\n plot_config['subplots'] = {\n # Create subplot MACD\n \"MACD\": {\n 'macd': {'color': 'blue', 'fill_to': 'macdhist'},\n 'macdsignal': {'color': 'orange'},\n 'macdhist': {'type': 'bar', 'plotly': {'opacity': 0.9}}\n },\n # Additional subplot RSI\n \"RSI\": {\n 'rsi': {'color': 'red'}\n }\n }\n\n return plot_config\nAssigning plot_config is also possible as Attribute (this used to be the default way). This has the disadvantage that strategy parameters are not available, preventing certain configurations from working.
plot_config = {\n 'main_plot': {\n # Configuration for main plot indicators.\n # Specifies `ema10` to be red, and `ema50` to be a shade of gray\n 'ema10': {'color': 'red'},\n 'ema50': {'color': '#CCCCCC'},\n # By omitting color, a random color is selected.\n 'sar': {},\n # fill area between senkou_a and senkou_b\n 'senkou_a': {\n 'color': 'green', #optional\n 'fill_to': 'senkou_b',\n 'fill_label': 'Ichimoku Cloud', #optional\n 'fill_color': 'rgba(255,76,46,0.2)', #optional\n },\n # plot senkou_b, too. Not only the area to it.\n 'senkou_b': {}\n },\n 'subplots': {\n # Create subplot MACD\n \"MACD\": {\n 'macd': {'color': 'blue', 'fill_to': 'macdhist'},\n 'macdsignal': {'color': 'orange'},\n 'macdhist': {'type': 'bar', 'plotly': {'opacity': 0.9}}\n },\n # Additional subplot RSI\n \"RSI\": {\n 'rsi': {'color': 'red'}\n }\n }\n }\nNote
The above configuration assumes that ema10, ema50, senkou_a, senkou_b, macd, macdsignal, macdhist and rsi are columns in the DataFrame created by the strategy.
Warning
plotly arguments are only supported with plotly library and will not work with freq-ui.
Trade position adjustments
If position_adjustment_enable / adjust_trade_position() is used, the trade initial buy price is averaged over multiple orders and the trade start price will most likely appear outside the candle range.
The plot-profit subcommand shows an interactive graph with three plots:
The first graph is good to get a grip of how the overall market progresses.
The second graph will show if your algorithm works or doesn't. Perhaps you want an algorithm that steadily makes small profits, or one that acts less often, but makes big swings. This graph will also highlight the start (and end) of the Max drawdown period.
The third graph can be useful to spot outliers, events in pairs that cause profit spikes.
The forth graph can help you analyze trade parallelism, showing how often max_open_trades have been maxed out.
Possible options for the freqtrade plot-profit subcommand:
usage: freqtrade plot-profit [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH] [-s NAME]\n [--strategy-path PATH]\n [--recursive-strategy-search]\n [--freqaimodel NAME] [--freqaimodel-path PATH]\n [-p PAIRS [PAIRS ...]] [--timerange TIMERANGE]\n [--export {none,trades,signals}]\n [--backtest-filename PATH] [--db-url PATH]\n [--trade-source {DB,file}] [-i TIMEFRAME]\n [--auto-open]\n\noptions:\n -h, --help show this help message and exit\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --timerange TIMERANGE\n Specify what timerange of data to use.\n --export {none,trades,signals}\n Export backtest results (default: trades).\n --backtest-filename PATH, --export-filename PATH\n Use this filename for backtest results.Example:\n `--backtest-\n filename=backtest_results_2020-09-27_16-20-48.json`.\n Assumes either `user_data/backtest_results/` or\n `--export-directory` as base directory.\n --db-url PATH Override trades database URL, this is useful in custom\n deployments (default: `sqlite:///tradesv3.sqlite` for\n Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for\n Dry Run).\n --trade-source {DB,file}\n Specify the source for trades (Can be DB or file\n (backtest file)) Default: file\n -i TIMEFRAME, --timeframe TIMEFRAME\n Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).\n --auto-open Automatically open generated plot.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n\nStrategy arguments:\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n --freqaimodel NAME Specify a custom freqaimodels.\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\nThe -p/--pairs argument, can be used to limit the pairs that are considered for this calculation.
Examples:
Use custom backtest-export file
freqtrade plot-profit -p LTC/BTC --export-filename user_data/backtest_results/backtest-result.json\nUse custom database
freqtrade plot-profit -p LTC/BTC --db-url sqlite:///tradesv3.sqlite --trade-source DB\nfreqtrade --datadir user_data/data/binance_save/ plot-profit -p LTC/BTC\nPairlist Handlers define the list of pairs (pairlist) that the bot should trade. They are configured in the pairlists section of the configuration settings.
In your configuration, you can use Static Pairlist (defined by the StaticPairList Pairlist Handler) and Dynamic Pairlist (defined by the VolumePairList and PercentChangePairList Pairlist Handlers).
Additionally, AgeFilter, DelistFilter, PrecisionFilter, PriceFilter, ShuffleFilter, SpreadFilter and VolatilityFilter act as Pairlist Filters, removing certain pairs and/or moving their positions in the pairlist.
If multiple Pairlist Handlers are used, they are chained and a combination of all Pairlist Handlers forms the resulting pairlist the bot uses for trading and backtesting. Pairlist Handlers are executed in the sequence they are configured. You can define either StaticPairList, VolumePairList, ProducerPairList, RemotePairList, MarketCapPairList or PercentChangePairList as the starting Pairlist Handler.
Inactive markets are always removed from the resulting pairlist. Explicitly blacklisted pairs (those in the pair_blacklist configuration setting) are also always removed from the resulting pairlist.
The pair blacklist (configured via exchange.pair_blacklist in the configuration) disallows certain pairs from trading. This can be as simple as excluding DOGE/BTC - which will remove exactly this pair.
The pair-blacklist does also support wildcards (in regex-style) - so BNB/.* will exclude ALL pairs that start with BNB. You may also use something like .*DOWN/BTC or .*UP/BTC to exclude leveraged tokens (check Pair naming conventions for your exchange!)
StaticPairList (default, if not configured differently)VolumePairListPercentChangePairListProducerPairListRemotePairListMarketCapPairListAgeFilterDelistFilterFullTradesFilterOffsetFilterPerformanceFilterPrecisionFilterPriceFilterShuffleFilterSpreadFilterRangeStabilityFilterVolatilityFilterTesting pairlists
Pairlist configurations can be quite tricky to get right. Best use freqUI in webserver mode or the test-pairlist utility sub-command to test your Pairlist configuration quickly.
By default, the StaticPairList method is used, which uses a statically defined pair whitelist from the configuration. The pairlist also supports wildcards (in regex-style) - so .*/BTC will include all pairs with BTC as a stake.
It uses configuration from exchange.pair_whitelist and exchange.pair_blacklist, which in the below example, will trade BTC/USDT and ETH/USDT - and will prevent BNB/USDT trading.
Both pair_*list parameters support regex - so values like .*/USDT would enable trading all pairs that are not in the blacklist.
\"exchange\": {\n \"name\": \"...\",\n // ... \n \"pair_whitelist\": [\n \"BTC/USDT\",\n \"ETH/USDT\",\n // ...\n ],\n \"pair_blacklist\": [\n \"BNB/USDT\",\n // ...\n ]\n},\n\"pairlists\": [\n {\"method\": \"StaticPairList\"}\n],\nBy default, only currently enabled pairs are allowed. To skip pair validation against active markets, set \"allow_inactive\": true within the StaticPairList configuration. This can be useful for backtesting expired pairs (like quarterly spot-markets).
When used in a \"follow-up\" position (e.g. after VolumePairlist), all pairs in 'pair_whitelist' will be added to the end of the pairlist.
VolumePairList employs sorting/filtering of pairs by their trading volume. It selects number_assets top pairs with sorting based on the sort_key (which can only be quoteVolume).
When used in the chain of Pairlist Handlers in a non-leading position (after StaticPairList and other Pairlist Filters), VolumePairList considers outputs of previous Pairlist Handlers, adding its sorting/selection of the pairs by the trading volume.
When used in the leading position of the chain of Pairlist Handlers, the pair_whitelist configuration setting is ignored. Instead, VolumePairList selects the top assets from all available markets with matching stake-currency on the exchange.
The refresh_period setting allows to define the period (in seconds), at which the pairlist will be refreshed. Defaults to 1800s (30 minutes). The pairlist cache (refresh_period) on VolumePairList is only applicable to generating pairlists. Filtering instances (not the first position in the list) will not apply any cache (beyond caching candles for the duration of the candle in advanced mode) and will always use up-to-date data.
VolumePairList is per default based on the ticker data from exchange, as reported by the ccxt library:
quoteVolume is the amount of quote (stake) currency traded (bought or sold) in last 24 hours.\"pairlists\": [\n {\n \"method\": \"VolumePairList\",\n \"number_assets\": 20,\n \"sort_key\": \"quoteVolume\",\n \"min_value\": 0,\n \"max_value\": 8000000,\n \"refresh_period\": 1800\n }\n],\nYou can define a minimum volume with min_value - which will filter out pairs with a volume lower than the specified value in the specified timerange. In addition to that, you can also define a maximum volume with max_value - which will filter out pairs with a volume higher than the specified value in the specified timerange.
VolumePairList can also operate in an advanced mode to build volume over a given timerange of specified candle size. It utilizes exchange historical candle data, builds a typical price (calculated by (open+high+low)/3) and multiplies the typical price with every candle's volume. The sum is the quoteVolume over the given range. This allows different scenarios, for a more smoothened volume, when using longer ranges with larger candle sizes, or the opposite when using a short range with small candles.
For convenience lookback_days can be specified, which will imply that 1d candles will be used for the lookback. In the example below the pairlist would be created based on the last 7 days:
\"pairlists\": [\n {\n \"method\": \"VolumePairList\",\n \"number_assets\": 20,\n \"sort_key\": \"quoteVolume\",\n \"min_value\": 0,\n \"refresh_period\": 86400,\n \"lookback_days\": 7\n }\n],\nRange look back and refresh period
When used in conjunction with lookback_days and lookback_timeframe the refresh_period can not be smaller than the candle size in seconds. As this will result in unnecessary requests to the exchanges API.
Performance implications when using lookback range
If used in first position in combination with lookback, the computation of the range based volume can be time and resource consuming, as it downloads candles for all tradable pairs. Hence it's highly advised to use the standard approach with VolumeFilter to narrow the pairlist down for further range volume calculation.
On some exchanges (like Gemini), regular VolumePairList does not work as the api does not natively provide 24h volume. This can be worked around by using candle data to build the volume. To roughly simulate 24h volume, you can use the following configuration. Please note that These pairlists will only refresh once per day.
\"pairlists\": [\n {\n \"method\": \"VolumePairList\",\n \"number_assets\": 20,\n \"sort_key\": \"quoteVolume\",\n \"min_value\": 0,\n \"refresh_period\": 86400,\n \"lookback_days\": 1\n }\n],\nMore sophisticated approach can be used, by using lookback_timeframe for candle size and lookback_period which specifies the amount of candles. This example will build the volume pairs based on a rolling period of 3 days of 1h candles:
\"pairlists\": [\n {\n \"method\": \"VolumePairList\",\n \"number_assets\": 20,\n \"sort_key\": \"quoteVolume\",\n \"min_value\": 0,\n \"refresh_period\": 3600,\n \"lookback_timeframe\": \"1h\",\n \"lookback_period\": 72\n }\n],\nNote
VolumePairList does not support backtesting mode.
PercentChangePairList filters and sorts pairs based on the percentage change in their price over the last 24 hours or any defined timeframe as part of advanced options. This allows traders to focus on assets that have experienced significant price movements, either positive or negative.
Configuration Options
number_assets: Specifies the number of top pairs to select based on the 24-hour percentage change.min_value: Sets a minimum percentage change threshold. Pairs with a percentage change below this value will be filtered out.max_value: Sets a maximum percentage change threshold. Pairs with a percentage change above this value will be filtered out.sort_direction: Specifies the order in which pairs are sorted based on their percentage change. Accepts two values: asc for ascending order and desc for descending order.refresh_period: Defines the interval (in seconds) at which the pairlist will be refreshed. The default is 1800 seconds (30 minutes).lookback_days: Number of days to look back. When lookback_days is selected, the lookback_timeframe is defaulted to 1 day.lookback_timeframe: Timeframe to use for the lookback period.lookback_period: Number of periods to look back at.When PercentChangePairList is used after other Pairlist Handlers, it will operate on the outputs of those handlers. If it is the leading Pairlist Handler, it will select pairs from all available markets with the specified stake currency.
PercentChangePairList uses ticker data from the exchange, provided via the ccxt library: The percentage change is calculated as the change in price over the last 24 hours.
On some exchanges (like HTX), regular PercentChangePairList does not work as the api does not natively provide 24h percent change in price. This can be worked around by using candle data to calculate the percentage change. To roughly simulate 24h percent change, you can use the following configuration. Please note that these pairlists will only refresh once per day.
\"pairlists\": [\n {\n \"method\": \"PercentChangePairList\",\n \"number_assets\": 20,\n \"min_value\": 0,\n \"refresh_period\": 86400,\n \"lookback_days\": 1\n }\n],\nExample Configuration to Read from Ticker
\"pairlists\": [\n {\n \"method\": \"PercentChangePairList\",\n \"number_assets\": 15,\n \"min_value\": -10,\n \"max_value\": 50\n }\n],\nIn this configuration:
Example Configuration to Read from Candles
\"pairlists\": [\n {\n \"method\": \"PercentChangePairList\",\n \"number_assets\": 15,\n \"sort_key\": \"percentage\",\n \"min_value\": 0,\n \"refresh_period\": 3600,\n \"lookback_timeframe\": \"1h\",\n \"lookback_period\": 72\n }\n],\nThis example builds the percent change pairs based on a rolling period of 3 days of 1-hour candles by using lookback_timeframe for candle size and lookback_period which specifies the number of candles.
The percent change in price is calculated using the following formula, which expresses the percentage difference between the current candle's close price and the previous candle's close price, as defined by the specified timeframe and lookback period:
\\[ Percent Change = (\\frac{Current Close - Previous Close}{Previous Close}) * 100 \\]Range look back and refresh period
When used in conjunction with lookback_days and lookback_timeframe the refresh_period can not be smaller than the candle size in seconds. As this will result in unnecessary requests to the exchanges API.
Performance implications when using lookback range
If used in first position in combination with lookback, the computation of the range-based percent change can be time and resource consuming, as it downloads candles for all tradable pairs. Hence it's highly advised to use the standard approach with PercentChangePairList to narrow the pairlist down for further percent-change calculation.
Backtesting
PercentChangePairList does not support backtesting mode.
With ProducerPairList, you can reuse the pairlist from a Producer without explicitly defining the pairlist on each consumer.
Consumer mode is required for this pairlist to work.
The pairlist will perform a check on active pairs against the current exchange configuration to avoid attempting to trade on invalid markets.
You can limit the length of the pairlist with the optional parameter number_assets. Using \"number_assets\"=0 or omitting this key will result in the reuse of all producer pairs valid for the current setup.
\"pairlists\": [\n {\n \"method\": \"ProducerPairList\",\n \"number_assets\": 5,\n \"producer_name\": \"default\",\n }\n],\nCombining pairlists
This pairlist can be combined with all other pairlists and filters for further pairlist reduction, and can also act as an \"additional\" pairlist, on top of already defined pairs. ProducerPairList can also be used multiple times in sequence, combining the pairs from multiple producers. Obviously in complex such configurations, the Producer may not provide data for all pairs, so the strategy must be fit for this.
It allows the user to fetch a pairlist from a remote server or a locally stored json file within the freqtrade directory, enabling dynamic updates and customization of the trading pairlist.
The RemotePairList is defined in the pairlists section of the configuration settings. It uses the following configuration options:
\"pairlists\": [\n {\n \"method\": \"RemotePairList\",\n \"mode\": \"whitelist\",\n \"processing_mode\": \"filter\",\n \"pairlist_url\": \"https://example.com/pairlist\",\n \"number_assets\": 10,\n \"refresh_period\": 1800,\n \"keep_pairlist_on_failure\": true,\n \"read_timeout\": 60,\n \"bearer_token\": \"my-bearer-token\",\n \"save_to_file\": \"user_data/filename.json\" \n }\n]\nThe optional mode option specifies if the pairlist should be used as a blacklist or as a whitelist. The default value is \"whitelist\".
The optional processing_mode option in the RemotePairList configuration determines how the retrieved pairlist is processed. It can have two values: \"filter\" or \"append\". The default value is \"filter\".
In \"filter\" mode, the retrieved pairlist is used as a filter. Only the pairs present in both the original pairlist and the retrieved pairlist are included in the final pairlist. Other pairs are filtered out.
In \"append\" mode, the retrieved pairlist is added to the original pairlist. All pairs from both lists are included in the final pairlist without any filtering.
The pairlist_url option specifies the URL of the remote server where the pairlist is located, or the path to a local file (if file:/// is prepended). This allows the user to use either a remote server or a local file as the source for the pairlist.
The save_to_file option, when provided with a valid filename, saves the processed pairlist to that file in JSON format. This option is optional, and by default, the pairlist is not saved to a file.
save_to_file can be used to save the pairlist to a file with Bot1:
\"pairlists\": [\n {\n \"method\": \"RemotePairList\",\n \"mode\": \"whitelist\",\n \"pairlist_url\": \"https://example.com/pairlist\",\n \"number_assets\": 10,\n \"refresh_period\": 1800,\n \"keep_pairlist_on_failure\": true,\n \"read_timeout\": 60,\n \"save_to_file\": \"user_data/filename.json\" \n }\n]\nThis saved pairlist file can be loaded by Bot2, or any additional bot with this configuration:
\"pairlists\": [\n {\n \"method\": \"RemotePairList\",\n \"mode\": \"whitelist\",\n \"pairlist_url\": \"file:///user_data/filename.json\",\n \"number_assets\": 10,\n \"refresh_period\": 10,\n \"keep_pairlist_on_failure\": true,\n }\n]\nThe user is responsible for providing a server or local file that returns a JSON object with the following structure:
{\n \"pairs\": [\"XRP/USDT\", \"ETH/USDT\", \"LTC/USDT\"],\n \"refresh_period\": 1800\n}\nThe pairs property should contain a list of strings with the trading pairs to be used by the bot. The refresh_period property is optional and specifies the number of seconds that the pairlist should be cached before being refreshed.
The optional keep_pairlist_on_failure specifies whether the previous received pairlist should be used if the remote server is not reachable or returns an error. The default value is true.
The optional read_timeout specifies the maximum amount of time (in seconds) to wait for a response from the remote source, The default value is 60.
The optional bearer_token will be included in the requests Authorization Header.
Note
In case of a server error the last received pairlist will be kept if keep_pairlist_on_failure is set to true, when set to false a empty pairlist is returned.
MarketCapPairList employs sorting/filtering of pairs by their marketcap rank based of CoinGecko. The returned pairlist will be sorted based of their marketcap ranks.
\"pairlists\": [\n {\n \"method\": \"MarketCapPairList\",\n \"number_assets\": 20,\n \"max_rank\": 50,\n \"refresh_period\": 86400,\n \"categories\": [\"layer-1\"]\n }\n]\nnumber_assets defines the maximum number of pairs returned by the pairlist. max_rank will determine the maximum rank used in creating/filtering the pairlist. It's expected that some coins within the top max_rank marketcap will not be included in the resulting pairlist since not all pairs will have active trading pairs in your preferred market/stake/exchange combination. While using a max_rank bigger than 250 is supported, it's not recommended, as it'll cause multiple API calls to CoinGecko, which can lead to rate limit issues.
The refresh_period setting defines the interval (in seconds) at which the marketcap rank data will be refreshed. The default is 86,400 seconds (1 day). The pairlist cache (refresh_period) applies to both generating pairlists (when in the first position in the list) and filtering instances (when not in the first position in the list).
The categories setting specifies the coingecko categories from which to select coins from. The default is an empty list [], meaning no category filtering is applied. If an incorrect category string is chosen, the plugin will print the available categories from CoinGecko and fail. The category should be the ID of the category, for example, for https://www.coingecko.com/en/categories/layer-1, the category ID would be layer-1. You can pass multiple categories such as [\"layer-1\", \"meme-token\"] to select from several categories.
Coins like 1000PEPE/USDT or KPEPE/USDT:USDT are detected on a best effort basis, with the prefixes 1000 and K being used to identify them.
Many categories
Each added category corresponds to one API call to CoinGecko. The more categories you add, the longer the pairlist generation will take, potentially causing rate limit issues.
Duplicate symbols in coingecko
Coingecko often has duplicate symbols, where the same symbol is used for different coins. Freqtrade will use the symbol as is and try to search for it on the exchange. If the symbol exists - it will be used. Freqtrade will however not check if the intended symbol is the one coingecko meant. This can sometimes lead to unexpected results, especially on low volume coins or with meme coin categories.
"},{"location":"plugins/#agefilter","title":"AgeFilter","text":"Removes pairs that have been listed on the exchange for less than min_days_listed days (defaults to 10) or more than max_days_listed days (defaults None mean infinity).
When pairs are first listed on an exchange they can suffer huge price drops and volatility in the first few days while the pair goes through its price-discovery period. Bots can often be caught out buying before the pair has finished dropping in price.
This filter allows freqtrade to ignore pairs until they have been listed for at least min_days_listed days and listed before max_days_listed.
Removes pairs that will be delisted on the exchange maximum max_days_from_now days from now (defaults to 0 which remove all future delisted pairs no matter how far from now). Currently this filter only supports following exchanges:
Available exchanges
Delist filter is only available on Binance, where Binance Futures will work for both dry and live modes, while Binance Spot is limited to live mode (for technical reasons).
Backtesting
DelistFilter does not support backtesting mode.
Shrink whitelist to consist only in-trade pairs when the trade slots are full (when max_open_trades isn't being set to -1 in the config).
When the trade slots are full, there is no need to calculate indicators of the rest of the pairs (except informative pairs) since no new trade can be opened. By shrinking the whitelist to just the in-trade pairs, you can improve calculation speeds and reduce CPU usage. When a trade slot is free (either a trade is closed or max_open_trades value in config is increased), then the whitelist will return to normal state.
When multiple pairlist filters are being used, it's recommended to put this filter at second position directly below the primary pairlist, so when the trade slots are full, the bot doesn't have to download data for the rest of the filters.
Backtesting
FullTradesFilter does not support backtesting mode.
Offsets an incoming pairlist by a given offset value.
As an example it can be used in conjunction with VolumeFilter to remove the top X volume pairs. Or to split a larger pairlist on two bot instances.
Example to remove the first 10 pairs from the pairlist, and takes the next 20 (taking items 10-30 of the initial list):
\"pairlists\": [\n // ...\n {\n \"method\": \"OffsetFilter\",\n \"offset\": 10,\n \"number_assets\": 20\n }\n],\nWarning
When OffsetFilter is used to split a larger pairlist among multiple bots in combination with VolumeFilter it can not be guaranteed that pairs won't overlap due to slightly different refresh intervals for the VolumeFilter.
Note
An offset larger than the total length of the incoming pairlist will result in an empty pairlist.
"},{"location":"plugins/#performancefilter","title":"PerformanceFilter","text":"Sorts pairs by past trade performance, as follows:
Trade count is used as a tie breaker.
You can use the minutes parameter to only consider performance of the past X minutes (rolling window). Not defining this parameter (or setting it to 0) will use all-time performance.
The optional min_profit (as ratio -> a setting of 0.01 corresponds to 1%) parameter defines the minimum profit a pair must have to be considered. Pairs below this level will be filtered out. Using this parameter without minutes is highly discouraged, as it can lead to an empty pairlist without a way to recover.
\"pairlists\": [\n // ...\n {\n \"method\": \"PerformanceFilter\",\n \"minutes\": 1440, // rolling 24h\n \"min_profit\": 0.01 // minimal profit 1%\n }\n],\nAs this Filter uses past performance of the bot, it'll have some startup-period - and should only be used after the bot has a few 100 trades in the database.
Backtesting
PerformanceFilter does not support backtesting mode.
Filters low-value coins which would not allow setting stoplosses.
Namely, pairs are blacklisted if a variance of one percent or more in the stop price would be caused by precision rounding on the exchange, i.e. rounded(stop_price) <= rounded(stop_price * 0.99). The idea is to avoid coins with a value VERY close to their lower trading boundary, not allowing setting of proper stoploss.
PrecisionFilter is pointless for futures trading
The above does not apply to shorts. And for longs, in theory the trade will be liquidated first.
Backtesting
PrecisionFilter does not support backtesting mode using multiple strategies.
The PriceFilter allows filtering of pairs by price. Currently the following price filters are supported:
min_pricemax_pricemax_valuelow_price_ratioThe min_price setting removes pairs where the price is below the specified price. This is useful if you wish to avoid trading very low-priced pairs. This option is disabled by default, and will only apply if set to > 0.
The max_price setting removes pairs where the price is above the specified price. This is useful if you wish to trade only low-priced pairs. This option is disabled by default, and will only apply if set to > 0.
The max_value setting removes pairs where the minimum value change is above a specified value. This is useful when an exchange has unbalanced limits. For example, if step-size = 1 (so you can only buy 1, or 2, or 3, but not 1.1 Coins) - and the price is pretty high (like 20$) as the coin has risen sharply since the last limit adaption. As a result of the above, you can only buy for 20$, or 40$ - but not for 25$. On exchanges that deduct fees from the receiving currency (e.g. binance) - this can result in high value coins / amounts that are unsellable as the amount is slightly below the limit.
The low_price_ratio setting removes pairs where a raise of 1 price unit (pip) is above the low_price_ratio ratio. This option is disabled by default, and will only apply if set to > 0.
For PriceFilter at least one of its min_price, max_price or low_price_ratio settings must be applied.
Calculation example:
Min price precision for SHITCOIN/BTC is 8 decimals. If its price is 0.00000011 - one price step above would be 0.00000012, which is ~9% higher than the previous price value. You may filter out this pair by using PriceFilter with low_price_ratio set to 0.09 (9%) or with min_price set to 0.00000011, correspondingly.
Low priced pairs
Low priced pairs with high \"1 pip movements\" are dangerous since they are often illiquid and it may also be impossible to place the desired stoploss, which can often result in high losses since price needs to be rounded to the next tradable price - so instead of having a stoploss of -5%, you could end up with a stoploss of -9% simply due to price rounding.
"},{"location":"plugins/#shufflefilter","title":"ShuffleFilter","text":"Shuffles (randomizes) pairs in the pairlist. It can be used for preventing the bot from trading some of the pairs more frequently then others when you want all pairs be treated with the same priority.
By default, ShuffleFilter will shuffle pairs once per candle. To shuffle on every iteration, set \"shuffle_frequency\" to \"iteration\" instead of the default of \"candle\".
{\n \"method\": \"ShuffleFilter\", \n \"shuffle_frequency\": \"candle\",\n \"seed\": 42\n }\nTip
You may set the seed value for this Pairlist to obtain reproducible results, which can be useful for repeated backtesting sessions. If seed is not set, the pairs are shuffled in the non-repeatable random order. ShuffleFilter will automatically detect runmodes and apply the seed only for backtesting modes - if a seed value is set.
Removes pairs that have a difference between asks and bids above the specified ratio, max_spread_ratio (defaults to 0.005).
Example:
If DOGE/BTC maximum bid is 0.00000026 and minimum ask is 0.00000027, the ratio is calculated as: 1 - bid/ask ~= 0.037 which is > 0.005 and this pair will be filtered out.
Removes pairs where the difference between lowest low and highest high over lookback_days days is below min_rate_of_change or above max_rate_of_change. Since this is a filter that requires additional data, the results are cached for refresh_period.
In the below example: If the trading range over the last 10 days is <1% or >99%, remove the pair from the whitelist.
\"pairlists\": [\n {\n \"method\": \"RangeStabilityFilter\",\n \"lookback_days\": 10,\n \"min_rate_of_change\": 0.01,\n \"max_rate_of_change\": 0.99,\n \"refresh_period\": 86400\n }\n]\nAdding \"sort_direction\": \"asc\" or \"sort_direction\": \"desc\" enables sorting for this pairlist.
Tip
This Filter can be used to automatically remove stable coin pairs, which have a very low trading range, and are therefore extremely difficult to trade with profit. Additionally, it can also be used to automatically remove pairs with extreme high/low variance over a given amount of time.
"},{"location":"plugins/#volatilityfilter","title":"VolatilityFilter","text":"Volatility is the degree of historical variation of a pairs over time, it is measured by the standard deviation of logarithmic daily returns. Returns are assumed to be normally distributed, although actual distribution might be different. In a normal distribution, 68% of observations fall within one standard deviation and 95% of observations fall within two standard deviations. Assuming a volatility of 0.05 means that the expected returns for 20 out of 30 days is expected to be less than 5% (one standard deviation). Volatility is a positive ratio of the expected deviation of return and can be greater than 1.00. Please refer to the wikipedia definition of volatility.
This filter removes pairs if the average volatility over a lookback_days days is below min_volatility or above max_volatility. Since this is a filter that requires additional data, the results are cached for refresh_period.
This filter can be used to narrow down your pairs to a certain volatility or avoid very volatile pairs.
In the below example: If the volatility over the last 10 days is not in the range of 0.05-0.50, remove the pair from the whitelist. The filter is applied every 24h.
\"pairlists\": [\n {\n \"method\": \"VolatilityFilter\",\n \"lookback_days\": 10,\n \"min_volatility\": 0.05,\n \"max_volatility\": 0.50,\n \"refresh_period\": 86400\n }\n]\nAdding \"sort_direction\": \"asc\" or \"sort_direction\": \"desc\" enables sorting mode for this pairlist.
The below example blacklists BNB/BTC, uses VolumePairList with 20 assets, sorting pairs by quoteVolume, then filter future delisted pairs using DelistFilter and AgeFilter to remove pairs that are listed less than 10 days ago. After that PrecisionFilter and PriceFilter are applied, filtering all assets where 1 price unit is > 1%. Then the SpreadFilter and VolatilityFilter are applied and pairs are finally shuffled with the random seed set to some predefined value.
\"exchange\": {\n \"pair_whitelist\": [],\n \"pair_blacklist\": [\"BNB/BTC\"]\n},\n\"pairlists\": [\n {\n \"method\": \"VolumePairList\",\n \"number_assets\": 20,\n \"sort_key\": \"quoteVolume\"\n },\n {\n \"method\": \"DelistFilter\",\n \"max_days_from_now\": 0,\n },\n {\"method\": \"AgeFilter\", \"min_days_listed\": 10},\n {\"method\": \"PrecisionFilter\"},\n {\"method\": \"PriceFilter\", \"low_price_ratio\": 0.01},\n {\"method\": \"SpreadFilter\", \"max_spread_ratio\": 0.005},\n {\n \"method\": \"RangeStabilityFilter\",\n \"lookback_days\": 10,\n \"min_rate_of_change\": 0.01,\n \"refresh_period\": 86400\n },\n {\n \"method\": \"VolatilityFilter\",\n \"lookback_days\": 10,\n \"min_volatility\": 0.05,\n \"max_volatility\": 0.50,\n \"refresh_period\": 86400\n },\n {\"method\": \"ShuffleFilter\", \"seed\": 42}\n],\nProtections will protect your strategy from unexpected events and market conditions by temporarily stop trading for either one pair, or for all pairs. All protection end times are rounded up to the next candle to avoid sudden, unexpected intra-candle buys.
Usage tips
Not all Protections will work for all strategies, and parameters will need to be tuned for your strategy to improve performance.
Each Protection can be configured multiple times with different parameters, to allow different levels of protection (short-term / long-term).
Backtesting
Protections are supported by backtesting and hyperopt, but must be explicitly enabled by using the --enable-protections flag.
StoplossGuard Stop trading if a certain amount of stoploss occurred within a certain time window.MaxDrawdown Stop trading if max-drawdown is reached.LowProfitPairs Lock pairs with low profitsCooldownPeriod Don't enter a trade right after selling a trade.method Protection name to use. Datatype: String, selected from available Protections stop_duration_candles For how many candles should the lock be set? Datatype: Positive integer (in candles) stop_duration how many minutes should protections be locked. Cannot be used together with stop_duration_candles. Datatype: Float (in minutes) lookback_period_candles Only trades that completed within the last lookback_period_candles candles will be considered. This setting may be ignored by some Protections. Datatype: Positive integer (in candles). lookback_period Only trades that completed after current_time - lookback_period will be considered. Cannot be used together with lookback_period_candles. This setting may be ignored by some Protections. Datatype: Float (in minutes) trade_limit Number of trades required at minimum (not used by all Protections). Datatype: Positive integer unlock_at Time when trading will be unlocked regularly (not used by all Protections). Datatype: string Input Format: \"HH:MM\" (24-hours) Durations
Durations (stop_duration* and lookback_period* can be defined in either minutes or candles). For more flexibility when testing different timeframes, all below examples will use the \"candle\" definition.
StoplossGuard selects all trades within lookback_period in minutes (or in candles when using lookback_period_candles). If trade_limit or more trades resulted in stoploss, trading will stop for stop_duration in minutes (or in candles when using stop_duration_candles, or until the set time when using unlock_at).
This applies across all pairs, unless only_per_pair is set to true, which will then only look at one pair at a time.
Similarly, this protection will by default look at all trades (long and short). For futures bots, setting only_per_side will make the bot only consider one side, and will then only lock this one side, allowing for example shorts to continue after a series of long stoplosses.
required_profit will determine the required relative profit (or loss) for stoplosses to consider. This should normally not be set and defaults to 0.0 - which means all losing stoplosses will be triggering a block.
The below example stops trading for all pairs for 4 candles after the last trade if the bot hit stoploss 4 times within the last 24 candles.
@property\ndef protections(self):\n return [\n {\n \"method\": \"StoplossGuard\",\n \"lookback_period_candles\": 24,\n \"trade_limit\": 4,\n \"stop_duration_candles\": 4,\n \"required_profit\": 0.0,\n \"only_per_pair\": False,\n \"only_per_side\": False\n }\n ]\nNote
StoplossGuard considers all trades with the results \"stop_loss\", \"stoploss_on_exchange\" and \"trailing_stop_loss\" if the resulting profit was negative. trade_limit and lookback_period will need to be tuned for your strategy.
MaxDrawdown uses all trades within lookback_period in minutes (or in candles when using lookback_period_candles) to determine the maximum drawdown. If the drawdown is below max_allowed_drawdown, trading will stop for stop_duration in minutes (or in candles when using stop_duration_candles) after the last trade - assuming that the bot needs some time to let markets recover.
The below sample stops trading for 12 candles if max-drawdown is > 20% considering all pairs - with a minimum of trade_limit trades - within the last 48 candles. If desired, lookback_period and/or stop_duration can be used.
@property\ndef protections(self):\n return [\n {\n \"method\": \"MaxDrawdown\",\n \"lookback_period_candles\": 48,\n \"trade_limit\": 20,\n \"stop_duration_candles\": 12,\n \"max_allowed_drawdown\": 0.2\n },\n ]\nLowProfitPairs uses all trades for a pair within lookback_period in minutes (or in candles when using lookback_period_candles) to determine the overall profit ratio. If that ratio is below required_profit, that pair will be locked for stop_duration in minutes (or in candles when using stop_duration_candles, or until the set time when using unlock_at).
For futures bots, setting only_per_side will make the bot only consider one side, and will then only lock this one side, allowing for example shorts to continue after a series of long losses.
The below example will stop trading a pair for 60 minutes if the pair does not have a required profit of 2% (and a minimum of 2 trades) within the last 6 candles.
@property\ndef protections(self):\n return [\n {\n \"method\": \"LowProfitPairs\",\n \"lookback_period_candles\": 6,\n \"trade_limit\": 2,\n \"stop_duration\": 60,\n \"required_profit\": 0.02,\n \"only_per_pair\": False,\n }\n ]\nCooldownPeriod locks a pair for stop_duration in minutes (or in candles when using stop_duration_candles, or until the set time when using unlock_at) after exiting, avoiding a re-entry for this pair for stop_duration minutes.
The below example will stop trading a pair for 2 candles after closing a trade, allowing this pair to \"cool down\".
@property\ndef protections(self):\n return [\n {\n \"method\": \"CooldownPeriod\",\n \"stop_duration_candles\": 2\n }\n ]\nNote
This Protection applies only at pair-level, and will never lock all pairs globally. This Protection does not consider lookback_period as it only looks at the latest trade.
All protections can be combined at will, also with different parameters, creating a increasing wall for under-performing pairs. All protections are evaluated in the sequence they are defined.
The below example assumes a timeframe of 1 hour:
CooldownPeriod), giving other pairs a chance to get filled.4 * 1h candles) if the last 2 days (48 * 1h candles) had 20 trades, which caused a max-drawdown of more than 20%. (MaxDrawdown).24 * 1h candles) limit (StoplossGuard).6 * 1h candles) with a combined profit ratio of below 0.02 (<2%) (LowProfitPairs).24 * 1h candles), a minimum of 4 trades.from freqtrade.strategy import IStrategy\n\nclass AwesomeStrategy(IStrategy)\n timeframe = '1h'\n\n @property\n def protections(self):\n return [\n {\n \"method\": \"CooldownPeriod\",\n \"stop_duration_candles\": 5\n },\n {\n \"method\": \"MaxDrawdown\",\n \"lookback_period_candles\": 48,\n \"trade_limit\": 20,\n \"stop_duration_candles\": 4,\n \"max_allowed_drawdown\": 0.2\n },\n {\n \"method\": \"StoplossGuard\",\n \"lookback_period_candles\": 24,\n \"trade_limit\": 4,\n \"stop_duration_candles\": 2,\n \"only_per_pair\": False\n },\n {\n \"method\": \"LowProfitPairs\",\n \"lookback_period_candles\": 6,\n \"trade_limit\": 2,\n \"stop_duration_candles\": 60,\n \"required_profit\": 0.02\n },\n {\n \"method\": \"LowProfitPairs\",\n \"lookback_period_candles\": 24,\n \"trade_limit\": 4,\n \"stop_duration_candles\": 2,\n \"required_profit\": 0.01\n }\n ]\n # ...\nfreqtrade provides a mechanism whereby an instance (also called consumer) may listen to messages from an upstream freqtrade instance (also called producer) using the message websocket. Mainly, analyzed_df and whitelist messages. This allows the reuse of computed indicators (and signals) for pairs in multiple bots without needing to compute them multiple times.
See Message Websocket in the Rest API docs for setting up the api_server configuration for your message websocket (this will be your producer).
Note
We strongly recommend to set ws_token to something random and known only to yourself to avoid unauthorized access to your bot.
Enable subscribing to an instance by adding the external_message_consumer section to the consumer's config file.
{\n //...\n \"external_message_consumer\": {\n \"enabled\": true,\n \"producers\": [\n {\n \"name\": \"default\", // This can be any name you'd like, default is \"default\"\n \"host\": \"127.0.0.1\", // The host from your producer's api_server config\n \"port\": 8080, // The port from your producer's api_server config\n \"secure\": false, // Use a secure websockets connection, default false\n \"ws_token\": \"sercet_Ws_t0ken\" // The ws_token from your producer's api_server config\n }\n ],\n // The following configurations are optional, and usually not required\n // \"wait_timeout\": 300,\n // \"ping_timeout\": 10,\n // \"sleep_time\": 10,\n // \"remove_entry_exit_signals\": false,\n // \"message_size_limit\": 8\n }\n //...\n}\nenabled Required. Enable consumer mode. If set to false, all other settings in this section are ignored.Defaults to false. Datatype: boolean . producers Required. List of producers Datatype: Array. producers.name Required. Name of this producer. This name must be used in calls to get_producer_pairs() and get_producer_df() if more than one producer is used. Datatype: string producers.host Required. The hostname or IP address from your producer. Datatype: string producers.port Required. The port matching the above host.Defaults to 8080. Datatype: Integer producers.secure Optional. Use ssl in websockets connection. Default False. Datatype: string producers.ws_token Required. ws_token as configured on the producer. Datatype: string Optional settings wait_timeout Timeout until we ping again if no message is received. Defaults to 300. Datatype: Integer - in seconds. ping_timeout Ping timeout Defaults to 10. Datatype: Integer - in seconds. sleep_time Sleep time before retrying to connect.Defaults to 10. Datatype: Integer - in seconds. remove_entry_exit_signals Remove signal columns from the dataframe (set them to 0) on dataframe receipt.Defaults to false. Datatype: Boolean. initial_candle_limit Initial candles to expect from the Producer.Defaults to 1500. Datatype: Integer - Number of candles. message_size_limit Size limit per messageDefaults to 8. Datatype: Integer - Megabytes. Instead of (or as well as) calculating indicators in populate_indicators() the follower instance listens on the connection to a producer instance's messages (or multiple producer instances in advanced configurations) and requests the producer's most recently analyzed dataframes for each pair in the active whitelist.
A consumer instance will then have a full copy of the analyzed dataframes without the need to calculate them itself.
"},{"location":"producer-consumer/#examples","title":"Examples","text":""},{"location":"producer-consumer/#example-producer-strategy","title":"Example - Producer Strategy","text":"A simple strategy with multiple indicators. No special considerations are required in the strategy itself.
class ProducerStrategy(IStrategy):\n #...\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Calculate indicators in the standard freqtrade way which can then be broadcast to other instances\n \"\"\"\n dataframe['rsi'] = ta.RSI(dataframe)\n bollinger = qtpylib.bollinger_bands(qtpylib.typical_price(dataframe), window=20, stds=2)\n dataframe['bb_lowerband'] = bollinger['lower']\n dataframe['bb_middleband'] = bollinger['mid']\n dataframe['bb_upperband'] = bollinger['upper']\n dataframe['tema'] = ta.TEMA(dataframe, timeperiod=9)\n\n return dataframe\n\n def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Populates the entry signal for the given dataframe\n \"\"\"\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], self.buy_rsi.value)) &\n (dataframe['tema'] <= dataframe['bb_middleband']) &\n (dataframe['tema'] > dataframe['tema'].shift(1)) &\n (dataframe['volume'] > 0)\n ),\n 'enter_long'] = 1\n\n return dataframe\nFreqAI
You can use this to setup FreqAI on a powerful machine, while you run consumers on simple machines like raspberries, which can interpret the signals generated from the producer in different ways.
"},{"location":"producer-consumer/#example-consumer-strategy","title":"Example - Consumer Strategy","text":"A logically equivalent strategy which calculates no indicators itself, but will have the same analyzed dataframes available to make trading decisions based on the indicators calculated in the producer. In this example the consumer has the same entry criteria, however this is not necessary. The consumer may use different logic to enter/exit trades, and only use the indicators as specified.
class ConsumerStrategy(IStrategy):\n #...\n process_only_new_candles = False # required for consumers\n\n _columns_to_expect = ['rsi_default', 'tema_default', 'bb_middleband_default']\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Use the websocket api to get pre-populated indicators from another freqtrade instance.\n Use `self.dp.get_producer_df(pair)` to get the dataframe\n \"\"\"\n pair = metadata['pair']\n timeframe = self.timeframe\n\n producer_pairs = self.dp.get_producer_pairs()\n # You can specify which producer to get pairs from via:\n # self.dp.get_producer_pairs(\"my_other_producer\")\n\n # This func returns the analyzed dataframe, and when it was analyzed\n producer_dataframe, _ = self.dp.get_producer_df(pair)\n # You can get other data if the producer makes it available:\n # self.dp.get_producer_df(\n # pair,\n # timeframe=\"1h\",\n # candle_type=CandleType.SPOT,\n # producer_name=\"my_other_producer\"\n # )\n\n if not producer_dataframe.empty:\n # If you plan on passing the producer's entry/exit signal directly,\n # specify ffill=False or it will have unintended results\n merged_dataframe = merge_informative_pair(dataframe, producer_dataframe,\n timeframe, timeframe,\n append_timeframe=False,\n suffix=\"default\")\n return merged_dataframe\n else:\n dataframe[self._columns_to_expect] = 0\n\n return dataframe\n\n def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Populates the entry signal for the given dataframe\n \"\"\"\n # Use the dataframe columns as if we calculated them ourselves\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi_default'], self.buy_rsi.value)) &\n (dataframe['tema_default'] <= dataframe['bb_middleband_default']) &\n (dataframe['tema_default'] > dataframe['tema_default'].shift(1)) &\n (dataframe['volume'] > 0)\n ),\n 'enter_long'] = 1\n\n return dataframe\nUsing upstream signals
By setting remove_entry_exit_signals=false, you can also use the producer's signals directly. They should be available as enter_long_default (assuming suffix=\"default\" was used) - and can be used as either signal directly, or as additional indicator.
This page explains how to validate your strategy for inaccuracies due to recursive issues with certain indicators.
A recursive formula defines any term of a sequence relative to its preceding term(s). An example of a recursive formula is an = an-1 + b.
Why does this matter for Freqtrade? In backtesting, the bot will get full data of the pairs according to the timerange specified. But in a dry/live run, the bot will be limited by the amount of data each exchanges gives.
For example, to calculate a very basic indicator called steps, the first row's value is always 0, while the following rows' values are equal to the value of the previous row plus 1. If I were to calculate it using the latest 1000 candles, then the steps value of the first row is 0, and the steps value at the last closed candle is 999.
What happens if the calculation is using only the latest 500 candles? Then instead of 999, the steps value at last closed candle is 499. The difference of the value means your backtest result can differ from your dry/live run result.
The recursive-analysis command requires historic data to be available. To learn how to get data for the pairs and exchange you're interested in, head over to the Data Downloading section of the documentation.
This command is built upon preparing different lengths of data and calculates indicators based on them. This does not backtest the strategy itself, but rather only calculates the indicators. After calculating the indicators of different startup candle values (startup_candle_count) are done, the values of last rows across all specified startup_candle_count are compared to see how much variance they show compared to the base calculation.
Command settings:
-p option to set your desired pair to analyze. Since we are only looking at indicator values, using more than one pair is redundant. Preferably use a pair with a relatively high price and at least moderate volatility, such as BTC or ETH, to avoid rounding issues that can make the results inaccurate. If no pair is set on the command, the pair used for this analysis is the first pair in the whitelist.--cache is forced to \"none\" to avoid loading previous indicators calculation automatically.In addition to the recursive formula check, this command also carries out a simple lookahead bias check on the indicator values only. For a full lookahead check, use Lookahead-analysis.
"},{"location":"recursive-analysis/#recursive-analysis-command-reference","title":"Recursive-analysis command reference","text":"usage: freqtrade recursive-analysis [-h] [-v] [--no-color] [--logfile FILE]\n [-V] [-c PATH] [-d PATH] [--userdir PATH]\n [-s NAME] [--strategy-path PATH]\n [--recursive-strategy-search]\n [--freqaimodel NAME]\n [--freqaimodel-path PATH] [-i TIMEFRAME]\n [--timerange TIMERANGE]\n [--data-format-ohlcv {json,jsongz,feather,parquet}]\n [-p PAIRS [PAIRS ...]]\n [--startup-candle STARTUP_CANDLE [STARTUP_CANDLE ...]]\n\noptions:\n -h, --help show this help message and exit\n -i TIMEFRAME, --timeframe TIMEFRAME\n Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).\n --timerange TIMERANGE\n Specify what timerange of data to use.\n --data-format-ohlcv {json,jsongz,feather,parquet}\n Storage format for downloaded candle (OHLCV) data.\n (default: `feather`).\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --startup-candle STARTUP_CANDLE [STARTUP_CANDLE ...]\n Specify startup candles to be checked (`199`, `499`,\n `999`, `1999`).\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n\nStrategy arguments:\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n --freqaimodel NAME Specify a custom freqaimodels.\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\nThe default value for startup candles are odd numbers. When the bot fetches candle data from the exchange's API, the last candle is the one being checked by the bot and the rest of the data are the \"startup candles\".
For example, Binance allows 1000 candles per API call. When the bot receives 1000 candles, the last candle is the \"current candle\", and the preceding 999 candles are the \"startup candles\". By setting the startup candle count as 1000 instead of 999, the bot will try to fetch 1001 candles instead. The exchange API will then send candle data in a paginated form, i.e. in case of the Binance API, this will be two groups- one of length 1000 and another of length 1. This results in the bot thinking the strategy needs 1001 candles of data, and so it will download 2000 candles worth of data instead, which means there will be 1 \"current candle\" and 1999 \"startup candles\".
Furthermore, exchanges limit the number of consecutive bulk API calls, e.g. Binance allows 5 calls. In this case, only 5000 candles can be downloaded from Binance API without hitting the API rate limit, which means the max startup_candle_count you can have is 4999.
Please note that this candle limit may be changed in the future by the exchanges without any prior notice.
"},{"location":"recursive-analysis/#how-does-the-command-work","title":"How does the command work?","text":"This is an example of an output results table where at least one indicator has a recursive formula issue:
| indicators | 20 | 40 | 80 | 100 | 150 | 300 | 999 |\n|--------------+---------+---------+--------+--------+---------+---------+--------|\n| rsi_30 | nan% | -6.025% | 0.612% | 0.828% | -0.140% | 0.000% | 0.000% |\n| rsi_14 | 24.141% | -0.876% | 0.070% | 0.007% | -0.000% | -0.000% | - |\nThe column headers indicate the different startup_candle_count used in the analysis. The values in the table indicate the variance of the calculated indicators compared to the benchmark value.
nan% means the value of that indicator cannot be calculated due to lack of data. In this example, you cannot calculate RSI with length 30 with just 21 candles (1 current candle + 20 startup candles).
Users should assess the table per indicator to decide if the specified startup_candle_count results in a sufficiently small variance so that the indicator does not have any effect on entries and/or exits.
As such, aiming for absolute zero variance (shown by - value) might not be the best option, because some indicators might require you to use such a long startup_candle_count to have zero variance.
recursive-analysis will only calculate and compare the indicator values at the last row. The output table reports the percentage differences between the different startup candle count calculations and the original benchmark calculation. Whether it has any actual impact on your entries and exits is not included.startup_candle_count high enough) that the recursion inherent in the indicator will not have any real impact on trading decisions.recursive-analysis will only run calculations on populate_indicators and @informative decorator(s). If you put any indicator calculation on populate_entry_trend or populate_exit_trend, it won't be calculated.FreqUI now has it's own dedicated documentation section - please refer to that section for all information regarding the FreqUI.
"},{"location":"rest-api/#configuration","title":"Configuration","text":"Enable the rest API by adding the api_server section to your configuration and setting api_server.enabled to true.
Sample configuration:
\"api_server\": {\n \"enabled\": true,\n \"listen_ip_address\": \"127.0.0.1\",\n \"listen_port\": 8080,\n \"verbosity\": \"error\",\n \"enable_openapi\": false,\n \"jwt_secret_key\": \"somethingrandom\",\n \"CORS_origins\": [],\n \"username\": \"Freqtrader\",\n \"password\": \"SuperSecret1!\",\n \"ws_token\": \"sercet_Ws_t0ken\"\n },\nSecurity warning
By default, the configuration listens on localhost only (so it's not reachable from other systems). We strongly recommend to not expose this API to the internet and choose a strong, unique password, since others will potentially be able to control your bot.
API/UI Access on a remote serversIf you're running on a VPS, you should consider using either a ssh tunnel, or setup a VPN (openVPN, wireguard) to connect to your bot. This will ensure that freqUI is not directly exposed to the internet, which is not recommended for security reasons (freqUI does not support https out of the box). Setup of these tools is not part of this tutorial, however many good tutorials can be found on the internet.
You can then access the API by going to http://127.0.0.1:8080/api/v1/ping in a browser to check if the API is running correctly. This should return the response:
{\"status\":\"pong\"}\nAll other endpoints return sensitive info and require authentication and are therefore not available through a web browser.
"},{"location":"rest-api/#security","title":"Security","text":"To generate a secure password, best use a password manager, or use the below code.
import secrets\nsecrets.token_hex()\nJWT token
Use the same method to also generate a JWT secret key (jwt_secret_key).
Password selection
Please make sure to select a very strong, unique password to protect your bot from unauthorized access. Also change jwt_secret_key to something random (no need to remember this, but it'll be used to encrypt your session, so it better be something unique!).
If you run your bot using docker, you'll need to have the bot listen to incoming connections. The security is then handled by docker.
\"api_server\": {\n \"enabled\": true,\n \"listen_ip_address\": \"0.0.0.0\",\n \"listen_port\": 8080,\n \"username\": \"Freqtrader\",\n \"password\": \"SuperSecret1!\",\n //...\n },\nMake sure that the following 2 lines are available in your docker-compose file:
ports:\n - \"127.0.0.1:8080:8080\"\nSecurity warning
By using \"8080:8080\" (or \"0.0.0.0:8080:8080\") in the docker port mapping, the API will be available to everyone connecting to the server under the correct port, so others may be able to control your bot. This may be safe if you're running the bot in a secure environment (like your home network), but it's not recommended to expose the API to the internet.
We advise consuming the API by using the supported freqtrade-client package (also available as scripts/rest_client.py).
This command can be installed independent of any running freqtrade bot by using pip install freqtrade-client.
This module is designed to be lightweight, and only depends on the requests and python-rapidjson modules, skipping all heavy dependencies freqtrade otherwise needs.
freqtrade-client <command> [optional parameters]\nBy default, the script assumes 127.0.0.1 (localhost) and port 8080 to be used, however you can specify a configuration file to override this behaviour.
{\n \"api_server\": {\n \"enabled\": true,\n \"listen_ip_address\": \"0.0.0.0\",\n \"listen_port\": 8080,\n \"username\": \"Freqtrader\",\n \"password\": \"SuperSecret1!\",\n //...\n }\n}\nfreqtrade-client --config rest_config.json <command> [optional parameters]\nCommands with many arguments may require keyword arguments (for clarity) - which can be provided as follows:
freqtrade-client --config rest_config.json forceenter BTC/USDT long enter_tag=GutFeeling\nThis method will work for all arguments - check the \"show\" command for a list of available parameters.
Programmatic useThe freqtrade-client package (installable independent of freqtrade) can be used in your own scripts to interact with the freqtrade API. to do so, please use the following:
from freqtrade_client import FtRestClient\n\n\nclient = FtRestClient(server_url, username, password)\n\n# Get the status of the bot\nping = client.ping()\nprint(ping)\n\n# Add pairs to blacklist\nclient.blacklist(\"BTC/USDT\", \"ETH/USDT\")\n# Add pairs to blacklist by supplying a list\nclient.blacklist(*listPairs)\n# ... \nFor a full list of available commands, please refer to the list below.
Possible commands can be listed from the rest-client script using the help command.
freqtrade-client help\nPossible commands:\n\navailable_pairs\n Return available pair (backtest data) based on timeframe / stake_currency selection\n\n :param timeframe: Only pairs with this timeframe available.\n :param stake_currency: Only pairs that include this timeframe\n\nbalance\n Get the account balance.\n\nblacklist\n Show the current blacklist.\n\n :param add: List of coins to add (example: \"BNB/BTC\")\n\ncancel_open_order\n Cancel open order for trade.\n\n :param trade_id: Cancels open orders for this trade.\n\ncount\n Return the amount of open trades.\n\ndaily\n Return the profits for each day, and amount of trades.\n\ndelete_lock\n Delete (disable) lock from the database.\n\n :param lock_id: ID for the lock to delete\n\ndelete_trade\n Delete trade from the database.\n Tries to close open orders. Requires manual handling of this asset on the exchange.\n\n :param trade_id: Deletes the trade with this ID from the database.\n\nforcebuy\n Buy an asset.\n\n :param pair: Pair to buy (ETH/BTC)\n :param price: Optional - price to buy\n\nforceenter\n Force entering a trade\n\n :param pair: Pair to buy (ETH/BTC)\n :param side: 'long' or 'short'\n :param price: Optional - price to buy\n\nforceexit\n Force-exit a trade.\n\n :param tradeid: Id of the trade (can be received via status command)\n :param ordertype: Order type to use (must be market or limit)\n :param amount: Amount to sell. Full sell if not given\n\nhealth\n Provides a quick health check of the running bot.\n\nlock_add\n Manually lock a specific pair\n\n :param pair: Pair to lock\n :param until: Lock until this date (format \"2024-03-30 16:00:00Z\")\n :param side: Side to lock (long, short, *)\n :param reason: Reason for the lock \n\nlocks\n Return current locks\n\nlogs\n Show latest logs.\n\n :param limit: Limits log messages to the last <limit> logs. No limit to get the entire log.\n\npair_candles\n Return live dataframe for <pair><timeframe>.\n\n :param pair: Pair to get data for\n :param timeframe: Only pairs with this timeframe available.\n :param limit: Limit result to the last n candles.\n\npair_history\n Return historic, analyzed dataframe\n\n :param pair: Pair to get data for\n :param timeframe: Only pairs with this timeframe available.\n :param strategy: Strategy to analyze and get values for\n :param timerange: Timerange to get data for (same format than --timerange endpoints)\n\nperformance\n Return the performance of the different coins.\n\nping\n simple ping\n\nplot_config\n Return plot configuration if the strategy defines one.\n\nprofit\n Return the profit summary.\n\nreload_config\n Reload configuration.\n\nshow_config\n Returns part of the configuration, relevant for trading operations.\n\nstart\n Start the bot if it's in the stopped state.\n\npause\n Pause the bot if it's in the running state. If triggered on stopped state will handle open positions.\n\nstats\n Return the stats report (durations, sell-reasons).\n\nstatus\n Get the status of open trades.\n\nstop\n Stop the bot. Use `start` to restart.\n\nstopbuy\n Stop buying (but handle sells gracefully). Use `reload_config` to reset.\n\nstrategies\n Lists available strategies\n\nstrategy\n Get strategy details\n\n :param strategy: Strategy class name\n\nsysinfo\n Provides system information (CPU, RAM usage)\n\ntrade\n Return specific trade\n\n :param trade_id: Specify which trade to get.\n\ntrades\n Return trades history, sorted by id\n\n :param limit: Limits trades to the X last trades. Max 500 trades.\n :param offset: Offset by this amount of trades.\n\nlist_open_trades_custom_data\n Return a dict containing open trades custom-datas\n\n :param key: str, optional - Key of the custom-data\n :param limit: Limits trades to X trades.\n :param offset: Offset by this amount of trades.\n\nlist_custom_data\n Return a dict containing custom-datas of a specified trade\n\n :param trade_id: int - ID of the trade\n :param key: str, optional - Key of the custom-data\n\nversion\n Return the version of the bot.\n\nwhitelist\n Show the current whitelist.\nIf you wish to call the REST API manually via another route, e.g. directly via curl, the table below shows the relevant URL endpoints and parameters. All endpoints in the below table need to be prefixed with the base URL of the API, e.g. http://127.0.0.1:8080/api/v1/ - so the command becomes http://127.0.0.1:8080/api/v1/<command>.
/ping GET Simple command testing the API Readiness - requires no authentication. /start POST Starts the trader. /pause POST Pause the trader. Gracefully handle open trades according to their rules. Do not enter new positions. /stop POST Stops the trader. /stopbuy POST Stops the trader from opening new trades. Gracefully closes open trades according to their rules. /reload_config POST Reloads the configuration file. /trades GET List last trades. Limited to 500 trades per call. /trade/<tradeid> GET Get specific trade.Params:- tradeid (int) /trades/<tradeid> DELETE Remove trade from the database. Tries to close open orders. Requires manual handling of this trade on the exchange.Params:- tradeid (int) /trades/<tradeid>/open-order DELETE Cancel open order for this trade.Params:- tradeid (int) /trades/<tradeid>/reload POST Reload a trade from the Exchange. Only works in live, and can potentially help recover a trade that was manually sold on the exchange.Params:- tradeid (int) /show_config GET Shows part of the current configuration with relevant settings to operation. /logs GET Shows last log messages. /status GET Lists all open trades. /count GET Displays number of trades used and available. /entries GET Shows profit statistics for each enter tags for given pair (or all pairs if pair isn't given). Pair is optional.Params:- pair (str) /exits GET Shows profit statistics for each exit reasons for given pair (or all pairs if pair isn't given). Pair is optional.Params:- pair (str) /mix_tags GET Shows profit statistics for each combinations of enter tag + exit reasons for given pair (or all pairs if pair isn't given). Pair is optional.Params:- pair (str) /locks GET Displays currently locked pairs. /locks POST Locks a pair until \"until\". (Until will be rounded up to the nearest timeframe). Side is optional and is either long or short (default is long). Reason is optional.Params:- <pair> (str)- <until> (datetime)- [side] (str)- [reason] (str) /locks/<lockid> DELETE Deletes (disables) the lock by id.Params:- lockid (int) /profit GET Display a summary of your profit/loss from close trades and some stats about your performance. /forceexit POST Instantly exits the given trade (ignoring minimum_roi), using the given order type (\"market\" or \"limit\", uses your config setting if not specified), and the chosen amount (full sell if not specified). If all is supplied as the tradeid, then all currently open trades will be forced to exit.Params:- <tradeid> (int or str)- <ordertype> (str)- [amount] (float) /forceenter POST Instantly enters the given pair. Side is optional and is either long or short (default is long). Rate is optional. (force_entry_enable must be set to True)Params:- <pair> (str)- <side> (str)- [rate] (float) /performance GET Show performance of each finished trade grouped by pair. /balance GET Show account balance per currency. /daily GET Shows profit or loss per day, over the last n days (n defaults to 7).Params:- timescale (int) /weekly GET Shows profit or loss per week, over the last n days (n defaults to 4).Params:- timescale (int) /monthly GET Shows profit or loss per month, over the last n days (n defaults to 3).Params:- timescale (int) /stats GET Display a summary of profit / loss reasons as well as average holding times. /whitelist GET Show the current whitelist. /blacklist GET Show the current blacklist. /blacklist POST Adds the specified pair to the blacklist.Params:- blacklist (str) /blacklist DELETE Deletes the specified list of pairs from the blacklist.Params:- [pair,pair] (list[str]) /pair_candles GET Returns dataframe for a pair / timeframe combination while the bot is running. Alpha /pair_candles POST Returns dataframe for a pair / timeframe combination while the bot is running, filtered by a provided list of columns to return. AlphaParams:- <column_list> (list[str]) /pair_history GET Returns an analyzed dataframe for a given timerange, analyzed by a given strategy. Alpha /pair_history POST Returns an analyzed dataframe for a given timerange, analyzed by a given strategy, filtered by a provided list of columns to return. AlphaParams:- <column_list> (list[str]) /plot_config GET Get plot config from the strategy (or nothing if not configured). Alpha /strategies GET List strategies in strategy directory. Alpha /strategy/<strategy> GET Get specific Strategy content by strategy class name. AlphaParams:- <strategy> (str) /available_pairs GET List available backtest data. Alpha /version GET Show version. /sysinfo GET Show information about the system load. /health GET Show bot health (last bot loop). Alpha status
Endpoints labeled with Alpha status above may change at any time without notice.
"},{"location":"rest-api/#message-websocket","title":"Message WebSocket","text":"The API Server includes a websocket endpoint for subscribing to RPC messages from the freqtrade Bot. This can be used to consume real-time data from your bot, such as entry/exit fill messages, whitelist changes, populated indicators for pairs, and more.
This is also used to setup Producer/Consumer mode in Freqtrade.
Assuming your rest API is set to 127.0.0.1 on port 8080, the endpoint is available at http://localhost:8080/api/v1/message/ws.
To access the websocket endpoint, the ws_token is required as a query parameter in the endpoint URL.
To generate a safe ws_token you can run the following code:
>>> import secrets\n>>> secrets.token_urlsafe(25)\n'hZ-y58LXyX_HZ8O1cJzVyN6ePWrLpNQv4Q'\nYou would then add that token under ws_token in your api_server config. Like so:
\"api_server\": {\n \"enabled\": true,\n \"listen_ip_address\": \"127.0.0.1\",\n \"listen_port\": 8080,\n \"verbosity\": \"error\",\n \"enable_openapi\": false,\n \"jwt_secret_key\": \"somethingrandom\",\n \"CORS_origins\": [],\n \"username\": \"Freqtrader\",\n \"password\": \"SuperSecret1!\",\n \"ws_token\": \"hZ-y58LXyX_HZ8O1cJzVyN6ePWrLpNQv4Q\" // <-----\n},\nYou can now connect to the endpoint at http://localhost:8080/api/v1/message/ws?token=hZ-y58LXyX_HZ8O1cJzVyN6ePWrLpNQv4Q.
Reuse of example tokens
Please do not use the above example token. To make sure you are secure, generate a completely new token.
"},{"location":"rest-api/#using-the-websocket","title":"Using the WebSocket","text":"Once connected to the WebSocket, the bot will broadcast RPC messages to anyone who is subscribed to them. To subscribe to a list of messages, you must send a JSON request through the WebSocket like the one below. The data key must be a list of message type strings.
{\n \"type\": \"subscribe\",\n \"data\": [\"whitelist\", \"analyzed_df\"] // A list of string message types\n}\nFor a list of message types, please refer to the RPCMessageType enum in freqtrade/enums/rpcmessagetype.py
Now anytime those types of RPC messages are sent in the bot, you will receive them through the WebSocket as long as the connection is active. They typically take the same form as the request:
{\n \"type\": \"analyzed_df\",\n \"data\": {\n \"key\": [\"NEO/BTC\", \"5m\", \"spot\"],\n \"df\": {}, // The dataframe\n \"la\": \"2022-09-08 22:14:41.457786+00:00\"\n }\n}\nWhen using Nginx, the following configuration is required for WebSockets to work (Note this configuration is incomplete, it's missing some information and can not be used as is):
Please make sure to replace <freqtrade_listen_ip> (and the subsequent port) with the IP and Port matching your configuration/setup.
http {\n map $http_upgrade $connection_upgrade {\n default upgrade;\n '' close;\n }\n\n #...\n\n server {\n #...\n\n location / {\n proxy_http_version 1.1;\n proxy_pass http://<freqtrade_listen_ip>:8080;\n proxy_set_header Upgrade $http_upgrade;\n proxy_set_header Connection $connection_upgrade;\n proxy_set_header Host $host;\n }\n }\n}\nTo properly configure your reverse proxy (securely), please consult it's documentation for proxying websockets.
SSL certificates
You can use tools like certbot to setup ssl certificates to access your bot's UI through encrypted connection by using any of the above reverse proxies. While this will protect your data in transit, we do not recommend to run the freqtrade API outside of your private network (VPN, SSH tunnel).
"},{"location":"rest-api/#openapi-interface","title":"OpenAPI interface","text":"To enable the builtin openAPI interface (Swagger UI), specify \"enable_openapi\": true in the api_server configuration. This will enable the Swagger UI at the /docs endpoint. By default, that's running at http://localhost:8080/docs - but it'll depend on your settings.
Note
The below should be done in an application (a Freqtrade REST API client, which fetches info via API), and is not intended to be used on a regular basis.
Freqtrade's REST API also offers JWT (JSON Web Tokens). You can login using the following command, and subsequently use the resulting access_token.
> curl -X POST --user Freqtrader http://localhost:8080/api/v1/token/login\n{\"access_token\":\"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpYXQiOjE1ODkxMTk2ODEsIm5iZiI6MTU4OTExOTY4MSwianRpIjoiMmEwYmY0NWUtMjhmOS00YTUzLTlmNzItMmM5ZWVlYThkNzc2IiwiZXhwIjoxNTg5MTIwNTgxLCJpZGVudGl0eSI6eyJ1IjoiRnJlcXRyYWRlciJ9LCJmcmVzaCI6ZmFsc2UsInR5cGUiOiJhY2Nlc3MifQ.qt6MAXYIa-l556OM7arBvYJ0SDI9J8bIk3_glDujF5g\",\"refresh_token\":\"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpYXQiOjE1ODkxMTk2ODEsIm5iZiI6MTU4OTExOTY4MSwianRpIjoiZWQ1ZWI3YjAtYjMwMy00YzAyLTg2N2MtNWViMjIxNWQ2YTMxIiwiZXhwIjoxNTkxNzExNjgxLCJpZGVudGl0eSI6eyJ1IjoiRnJlcXRyYWRlciJ9LCJ0eXBlIjoicmVmcmVzaCJ9.d1AT_jYICyTAjD0fiQAr52rkRqtxCjUGEMwlNuuzgNQ\"}\n\n> access_token=\"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpYXQiOjE1ODkxMTk2ODEsIm5iZiI6MTU4OTExOTY4MSwianRpIjoiMmEwYmY0NWUtMjhmOS00YTUzLTlmNzItMmM5ZWVlYThkNzc2IiwiZXhwIjoxNTg5MTIwNTgxLCJpZGVudGl0eSI6eyJ1IjoiRnJlcXRyYWRlciJ9LCJmcmVzaCI6ZmFsc2UsInR5cGUiOiJhY2Nlc3MifQ.qt6MAXYIa-l556OM7arBvYJ0SDI9J8bIk3_glDujF5g\"\n# Use access_token for authentication\n> curl -X GET --header \"Authorization: Bearer ${access_token}\" http://localhost:8080/api/v1/count\nSince the access token has a short timeout (15 min) - the token/refresh request should be used periodically to get a fresh access token:
> curl -X POST --header \"Authorization: Bearer ${refresh_token}\"http://localhost:8080/api/v1/token/refresh\n{\"access_token\":\"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpYXQiOjE1ODkxMTk5NzQsIm5iZiI6MTU4OTExOTk3NCwianRpIjoiMDBjNTlhMWUtMjBmYS00ZTk0LTliZjAtNWQwNTg2MTdiZDIyIiwiZXhwIjoxNTg5MTIwODc0LCJpZGVudGl0eSI6eyJ1IjoiRnJlcXRyYWRlciJ9LCJmcmVzaCI6ZmFsc2UsInR5cGUiOiJhY2Nlc3MifQ.1seHlII3WprjjclY6DpRhen0rqdF4j6jbvxIhUFaSbs\"}\nThis whole section is only necessary in cross-origin cases (where you multiple bot API's running on localhost:8081, localhost:8082, ...), and want to combine them into one FreqUI instance.
All web-based front-ends are subject to CORS - Cross-Origin Resource Sharing. Since most of the requests to the Freqtrade API must be authenticated, a proper CORS policy is key to avoid security problems. Also, the standard disallows * CORS policies for requests with credentials, so this setting must be set appropriately.
Users can allow access from different origin URL's to the bot API via the CORS_origins configuration setting. It consists of a list of allowed URL's that are allowed to consume resources from the bot's API.
Assuming your application is deployed as https://frequi.freqtrade.io/home/ - this would mean that the following configuration becomes necessary:
{\n //...\n \"jwt_secret_key\": \"somethingrandom\",\n \"CORS_origins\": [\"https://frequi.freqtrade.io\"],\n //...\n}\nIn the following (pretty common) case, FreqUI is accessible on http://localhost:8080/trade (this is what you see in your navbar when navigating to freqUI).
The correct configuration for this case is http://localhost:8080 - the main part of the URL including the port.
{\n //...\n \"jwt_secret_key\": \"somethingrandom\",\n \"CORS_origins\": [\"http://localhost:8080\"],\n //...\n}\ntrailing Slash
The trailing slash is not allowed in the CORS_origins configuration (e.g. \"http://localhots:8080/\"). Such a configuration will not take effect, and the cors errors will remain.
Note
We strongly recommend to also set jwt_secret_key to something random and known only to yourself to avoid unauthorized access to your bot.
This page contains some help if you want to query your sqlite db.
Other Database systems
To use other Database Systems like PostgreSQL or MariaDB, you can use the same queries, but you need to use the respective client for the database system. Click here to learn how to setup a different database system with freqtrade.
Warning
If you are not familiar with SQL, you should be very careful when running queries on your database. Always make sure to have a backup of your database before running any queries.
"},{"location":"sql_cheatsheet/#install-sqlite3","title":"Install sqlite3","text":"Sqlite3 is a terminal based sqlite application. Feel free to use a visual Database editor like SqliteBrowser if you feel more comfortable with that.
"},{"location":"sql_cheatsheet/#ubuntudebian-installation","title":"Ubuntu/Debian installation","text":"sudo apt-get install sqlite3\nThe freqtrade docker image does contain sqlite3, so you can edit the database without having to install anything on the host system.
docker compose exec freqtrade /bin/bash\nsqlite3 <database-file>.sqlite\nsqlite3\n.open <filepath>\n.tables\n.schema <table_name>\nSELECT * FROM trades;\nQueries that write to the database. These queries should usually not be necessary as freqtrade tries to handle all database operations itself - or exposes them via API or telegram commands.
Warning
Please make sure you have a backup of your database before running any of the below queries.
Danger
You should also never run any writing query (update, insert, delete) while a bot is connected to the database. This can and will lead to data corruption - most likely, without the possibility of recovery.
Warning
Manually selling a pair on the exchange will not be detected by the bot and it will try to sell anyway. Whenever possible, /forceexit should be used to accomplish the same thing. It is strongly advised to backup your database file before making any manual changes.
Note
This should not be necessary after /forceexit, as force_exit orders are closed automatically by the bot on the next iteration.
UPDATE trades\nSET is_open=0,\n close_date=<close_date>,\n close_rate=<close_rate>,\n close_profit = close_rate / open_rate - 1,\n close_profit_abs = (amount * <close_rate> * (1 - fee_close) - (amount * (open_rate * (1 - fee_open)))),\n exit_reason=<exit_reason>\nWHERE id=<trade_ID_to_update>;\nUPDATE trades\nSET is_open=0,\n close_date='2020-06-20 03:08:45.103418',\n close_rate=0.19638016,\n close_profit=0.0496,\n close_profit_abs = (amount * 0.19638016 * (1 - fee_close) - (amount * (open_rate * (1 - fee_open)))),\n exit_reason='force_exit' \nWHERE id=31;\nUse RPC Methods to delete trades
Consider using /delete <tradeid> via telegram or rest API. That's the recommended way to deleting trades.
If you'd still like to remove a trade from the database directly, you can use the below query.
Danger
Some systems (Ubuntu) disable foreign keys in their sqlite3 packaging. When using sqlite - please ensure that foreign keys are on by running PRAGMA foreign_keys = ON before the above query.
DELETE FROM trades WHERE id = <tradeid>;\n\nDELETE FROM trades WHERE id = 31;\nWarning
This will remove this trade from the database. Please make sure you got the correct id and NEVER run this query without the where clause.
The stoploss configuration parameter is loss as ratio that should trigger a sale. For example, value -0.10 will cause immediate sell if the profit dips below -10% for a given trade. This parameter is optional. Stoploss calculations do include fees, so a stoploss of -10% is placed exactly 10% below the entry point.
Most of the strategy files already include the optimal stoploss value.
Info
All stoploss properties mentioned in this file can be set in the Strategy, or in the configuration. Configuration values will override the strategy values.
"},{"location":"stoploss/#stop-loss-on-exchangefreqtrade","title":"Stop Loss On-Exchange/Freqtrade","text":"Those stoploss modes can be on exchange or off exchange.
These modes can be configured with these values:
'emergency_exit': 'market',\n 'stoploss_on_exchange': False\n 'stoploss_on_exchange_interval': 60,\n 'stoploss_on_exchange_limit_ratio': 0.99\nStoploss on exchange is only supported for the following exchanges, and not all exchanges support both stop-limit and stop-market. The Order-type will be ignored if only one mode is available.
Exchange stop-loss type Binance limit Binance Futures market, limit Bingx market, limit Bitget market, limit HTX limit kraken market, limit Gate limit Okx limit Kucoin stop-limit, stop-market Hyperliquid (futures only) limitTight stoploss
Do not set too low/tight stoploss value when using stop loss on exchange! If set to low/tight you will have greater risk of missing fill on the order and stoploss will not work.
"},{"location":"stoploss/#stoploss_on_exchange-and-stoploss_on_exchange_limit_ratio","title":"stoploss_on_exchange and stoploss_on_exchange_limit_ratio","text":"Enable or Disable stop loss on exchange. If the stoploss is on exchange it means a stoploss limit order is placed on the exchange immediately after buy order fills. This will protect you against sudden crashes in market, as the order execution happens purely within the exchange, and has no potential network overhead.
If stoploss_on_exchange uses limit orders, the exchange needs 2 prices, the stoploss_price and the Limit price. stoploss defines the stop-price where the limit order is placed - and limit should be slightly below this. If an exchange supports both limit and market stoploss orders, then the value of stoploss will be used to determine the stoploss type.
Calculation example: we bought the asset at 100$. Stop-price is 95$, then limit would be 95 * 0.99 = 94.05$ - so the limit order fill can happen between 95$ and 94.05$.
For example, assuming the stoploss is on exchange, and trailing stoploss is enabled, and the market is going up, then the bot automatically cancels the previous stoploss order and puts a new one with a stop value higher than the previous stoploss order.
Note
If stoploss_on_exchange is enabled and the stoploss is cancelled manually on the exchange, then the bot will create a new stoploss order.
In case of stoploss on exchange there is another parameter called stoploss_on_exchange_interval. This configures the interval in seconds at which the bot will check the stoploss and update it if necessary. The bot cannot do these every 5 seconds (at each iteration), otherwise it would get banned by the exchange. So this parameter will tell the bot how often it should update the stoploss order. The default value is 60 (1 minute). This same logic will reapply a stoploss order on the exchange should you cancel it accidentally.
Only applies to futures
stoploss_price_type only applies to futures markets (on exchanges where it's available). Freqtrade will perform a validation of this setting on startup, failing to start if an invalid setting for your exchange has been selected. Supported price types are gonna differs between each exchanges. Please check with your exchange on which price types it supports.
Stoploss on exchange on futures markets can trigger on different price types. The naming for these prices in exchange terminology often varies, but is usually something around \"last\" (or \"contract price\" ), \"mark\" and \"index\".
Acceptable values for this setting are \"last\", \"mark\" and \"index\" - which freqtrade will transfer automatically to the corresponding API type, and place the stoploss on exchange order correspondingly.
force_exit is an optional value, which defaults to the same value as exit and is used when sending a /forceexit command from Telegram or from the Rest API.
force_entry is an optional value, which defaults to the same value as entry and is used when sending a /forceentry command from Telegram or from the Rest API.
emergency_exit is an optional value, which defaults to market and is used when creating stop loss on exchange orders fails. The below is the default which is used if not changed in strategy or configuration file.
Example from strategy file:
order_types = {\n \"entry\": \"limit\",\n \"exit\": \"limit\",\n \"emergency_exit\": \"market\",\n \"stoploss\": \"market\",\n \"stoploss_on_exchange\": True,\n \"stoploss_on_exchange_interval\": 60,\n \"stoploss_on_exchange_limit_ratio\": 0.99\n}\nAt this stage the bot contains the following stoploss support modes:
This is very simple, you define a stop loss of x (as a ratio of price, i.e. x * 100% of price). This will try to sell the asset once the loss exceeds the defined loss.
Example of stop loss:
stoploss = -0.10\nFor example, simplified math:
The initial value for this is stoploss, just as you would define your static Stop loss. To enable trailing stoploss:
stoploss = -0.10\n trailing_stop = True\nThis will now activate an algorithm, which automatically moves the stop loss up every time the price of your asset increases.
For example, simplified math:
In summary: The stoploss will be adjusted to be always be -10% of the highest observed price.
"},{"location":"stoploss/#trailing-stop-loss-different-positive-loss","title":"Trailing stop loss, different positive loss","text":"You could also have a default stop loss when you are in the red with your buy (buy - fee), but once you hit a positive result (or an offset you define) the system will utilize a new stop loss, with a different value. For example, your default stop loss is -10%, but once you have reached profitability (example 0.1%) a different trailing stoploss will be used.
Note
If you want the stoploss to only be changed when you break even of making a profit (what most users want) please refer to next section with offset enabled.
Both values require trailing_stop to be set to true and trailing_stop_positive with a value.
stoploss = -0.10\n trailing_stop = True\n trailing_stop_positive = 0.02\n trailing_stop_positive_offset = 0.0\n trailing_only_offset_is_reached = False # Default - not necessary for this example\nFor example, simplified math:
The 0.02 would translate to a -2% stop loss. Before this, stoploss is used for the trailing stoploss.
Use an offset to change your stoploss
Use trailing_stop_positive_offset to ensure that your new trailing stoploss will be in profit by setting trailing_stop_positive_offset higher than trailing_stop_positive. Your first new stoploss value will then already have locked in profits.
Example with simplified math:
stoploss = -0.10\n trailing_stop = True\n trailing_stop_positive = 0.02\n trailing_stop_positive_offset = 0.03\nYou can also keep a static stoploss until the offset is reached, and then trail the trade to take profits once the market turns.
If trailing_only_offset_is_reached = True then the trailing stoploss is only activated once the offset is reached. Until then, the stoploss remains at the configured stoploss and is not trailing. Leaving this value as trailing_only_offset_is_reached=False will allow the trailing stoploss to start trailing as soon as the asset price increases above the initial entry price.
This option can be used with or without trailing_stop_positive, but uses trailing_stop_positive_offset as offset.
Configuration (offset is buy-price + 3%):
stoploss = -0.10\n trailing_stop = True\n trailing_stop_positive = 0.02\n trailing_stop_positive_offset = 0.03\n trailing_only_offset_is_reached = True\nFor example, simplified math:
Tip
Make sure to have this value (trailing_stop_positive_offset) lower than minimal ROI, otherwise minimal ROI will apply first and sell the trade.
Stoploss should be thought of as \"risk on this trade\" - so a stoploss of 10% on a 100$ trade means you are willing to lose 10$ (10%) on this trade - which would trigger if the price moves 10% to the downside.
When using leverage, the same principle is applied - with stoploss defining the risk on the trade (the amount you are willing to lose).
Therefore, a stoploss of 10% on a 10x trade would trigger on a 1% price move. If your stake amount (own capital) was 100$ - this trade would be 1000$ at 10x (after leverage). If price moves 1% - you've lost 10$ of your own capital - therefore stoploss will trigger in this case.
Make sure to be aware of this, and avoid using too tight stoploss (at 10x leverage, 10% risk may be too little to allow the trade to \"breath\" a little).
"},{"location":"stoploss/#changing-stoploss-on-open-trades","title":"Changing stoploss on open trades","text":"A stoploss on an open trade can be changed by changing the value in the configuration or strategy and use the /reload_config command (alternatively, completely stopping and restarting the bot also works).
The new stoploss value will be applied to open trades (and corresponding log-messages will be generated).
"},{"location":"stoploss/#limitations","title":"Limitations","text":"Stoploss values cannot be changed if trailing_stop is enabled and the stoploss has already been adjusted.
For the purposes of this quick start, we are assuming you are familiar with the basics of trading, and have read the Freqtrade basics page.
"},{"location":"strategy-101/#required-knowledge","title":"Required Knowledge","text":"A strategy in Freqtrade is a Python class that defines the logic for buying and selling cryptocurrency assets.
Assets are defined as pairs, which represent the coin and the stake. The coin is the asset you are trading using another currency as the stake.
Data is supplied by the exchange in the form of candles, which are made up of a six values: date, open, high, low, close and volume.
Technical analysis functions analyse the candle data using various computational and statistical formulae, and produce secondary values called indicators.
Indicators are analysed on the asset pair candles to generate signals.
Signals are turned into orders on a cryptocurrency exchange, i.e. trades.
We use the terms entry and exit instead of buying and selling because Freqtrade supports both long and short trades.
Whilst Freqtrade supports spot and futures markets for certain exchanges, for simplicity we will focus on spot (long) trades only.
"},{"location":"strategy-101/#structure-of-a-basic-strategy","title":"Structure of a Basic Strategy","text":""},{"location":"strategy-101/#main-dataframe","title":"Main dataframe","text":"Freqtrade strategies use a tabular data structure with rows and columns known as a dataframe to generate signals to enter and exit trades.
Each pair in your configured pairlist has its own dataframe. Dataframes are indexed by the date column, e.g. 2024-06-31 12:00.
The next 5 columns represent the open, high, low, close and volume (OHLCV) data.
The populate_indicators function adds columns to the dataframe that represent the technical analysis indicator values.
Examples of common indicators include Relative Strength Index, Bollinger Bands, Money Flow Index, Moving Average, and Average True Range.
Columns are added to the dataframe by calling technical analysis functions, e.g. ta-lib's RSI function ta.RSI(), and assigning them to a column name, e.g. rsi
dataframe['rsi'] = ta.RSI(dataframe)\nDifferent libraries work in different ways to generate indicator values. Please check the documentation of each library to understand how to integrate it into your strategy. You can also check the Freqtrade example strategies to give you ideas.
"},{"location":"strategy-101/#populate-entry-signals","title":"Populate entry signals","text":"The populate_entry_trend function defines conditions for an entry signal.
The dataframe column enter_long is added to the dataframe, and when a value of 1 is in this column, Freqtrade sees an entry signal.
To enter short trades, use the enter_short column.
The populate_exit_trend function defines conditions for an exit signal.
The dataframe column exit_long is added to the dataframe, and when a value of 1 is in this column, Freqtrade sees an exit signal.
To exit short trades, use the exit_short column.
Here is a minimal example of a Freqtrade strategy:
from freqtrade.strategy import IStrategy\nfrom pandas import DataFrame\nimport talib.abstract as ta\n\nclass MyStrategy(IStrategy):\n\n timeframe = '15m'\n\n # set the initial stoploss to -10%\n stoploss = -0.10\n\n # exit profitable positions at any time when the profit is greater than 1%\n minimal_roi = {\"0\": 0.01}\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # generate values for technical analysis indicators\n dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)\n\n return dataframe\n\n def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # generate entry signals based on indicator values\n dataframe.loc[\n (dataframe['rsi'] < 30),\n 'enter_long'] = 1\n\n return dataframe\n\n def populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # generate exit signals based on indicator values\n dataframe.loc[\n (dataframe['rsi'] > 70),\n 'exit_long'] = 1\n\n return dataframe\nWhen a signal is found (a 1 in an entry or exit column), Freqtrade will attempt to make an order, i.e. a trade or position.
Each new trade position takes up a slot. Slots represent the maximum number of concurrent new trades that can be opened.
The number of slots is defined by the max_open_trades configuration option.
However, there can be a range of scenarios where generating a signal does not always create a trade order. These include:
max_open_trades option)Read through the strategy customization documentation for more details.
"},{"location":"strategy-101/#backtesting-and-forward-testing","title":"Backtesting and forward testing","text":"Strategy development can be a long and frustrating process, as turning our human \"gut instincts\" into a working computer-controlled (\"algo\") strategy is not always straightforward.
Therefore a strategy should be tested to verify that it is going to work as intended.
Freqtrade has two testing modes:
Dry runs are enabled by setting dry_run to true in your configuration.
Backtests can be very inaccurate
There are many reasons why backtest results may not match reality. Please check the backtesting assumptions and common strategy mistakes documentation. Some websites that list and rank Freqtrade strategies show impressive backtest results. Do not assume these results are achieveable or realistic.
Useful commandsFreqtrade includes two useful commands to check for basic flaws in strategies: lookahead-analysis and recursive-analysis.
"},{"location":"strategy-101/#assessing-backtesting-and-dry-run-results","title":"Assessing backtesting and dry run results","text":"Always dry run your strategy after backtesting it to see if backtesting and dry run results are sufficiently similar.
If there is any significant difference, verify that your entry and exit signals are consistent and appear on the same candles between the two modes. However, there will always be differences between dry runs and backtests:
Once your bot is running in dry or live mode, Freqtrade has six mechanisms to control or monitor a running bot:
Freqtrade generates extensive debugging logs to help you understand what's happening. Please familiarise yourself with the information and error messages you might see in your bot logs.
Logging by default occurs on standard out (the command line). If you want to write out to a file instead, many freqtrade commands, including the trade command, accept the --logfile option to write to a file.
Check the FAQ for examples.
"},{"location":"strategy-101/#final-thoughts","title":"Final Thoughts","text":"Algo trading is difficult, and most public strategies are not good performers due to the time and effort to make a strategy work profitably in multiple scenarios.
Therefore, taking public strategies and using backtests as a way to assess performance is often problematic. However, Freqtrade provides useful ways to help you make decisions and do your due diligence.
There are many different ways to achieve profitability, and there is no one single tip, trick or config option that will fix a poorly performing strategy.
Freqtrade is an open source platform with a large and helpful community - make sure to visit our discord channel to discuss your strategy with others!
As always, only invest what you are willing to lose.
"},{"location":"strategy-101/#conclusion","title":"Conclusion","text":"Developing a strategy in Freqtrade involves defining entry and exit signals based on technical indicators. By following the structure and methods outlined above, you can create and test your own trading strategies.
Common questions and answers are available on our FAQ.
To continue, refer to the more in-depth Freqtrade strategy customization documentation.
"},{"location":"strategy-advanced/","title":"Advanced Strategies","text":"This page explains some advanced concepts available for strategies. If you're just getting started, please familiarize yourself with the Freqtrade basics and methods described in Strategy Customization first.
The call sequence of the methods described here is covered under bot execution logic. Those docs are also helpful in deciding which method is most suitable for your customisation needs.
Note
Callback methods should only be implemented if a strategy uses them.
Tip
Start off with a strategy template containing all available callback methods by running freqtrade new-strategy --strategy MyAwesomeStrategy --template advanced
Freqtrade allows storing/retrieving user custom information associated with a specific trade in the database.
Using a trade object, information can be stored using trade.set_custom_data(key='my_key', value=my_value) and retrieved using trade.get_custom_data(key='my_key'). Each data entry is associated with a trade and a user supplied key (of type string). This means that this can only be used in callbacks that also provide a trade object.
For the data to be able to be stored within the database, freqtrade must serialized the data. This is done by converting the data to a JSON formatted string. Freqtrade will attempt to reverse this action on retrieval, so from a strategy perspective, this should not be relevant.
from freqtrade.persistence import Trade\nfrom datetime import timedelta\n\nclass AwesomeStrategy(IStrategy):\n\n def bot_loop_start(self, **kwargs) -> None:\n for trade in Trade.get_open_order_trades():\n fills = trade.select_filled_orders(trade.entry_side)\n if trade.pair == 'ETH/USDT':\n trade_entry_type = trade.get_custom_data(key='entry_type')\n if trade_entry_type is None:\n trade_entry_type = 'breakout' if 'entry_1' in trade.enter_tag else 'dip'\n elif fills > 1:\n trade_entry_type = 'buy_up'\n trade.set_custom_data(key='entry_type', value=trade_entry_type)\n return super().bot_loop_start(**kwargs)\n\n def adjust_entry_price(self, trade: Trade, order: Order | None, pair: str,\n current_time: datetime, proposed_rate: float, current_order_rate: float,\n entry_tag: str | None, side: str, **kwargs) -> float:\n # Limit orders to use and follow SMA200 as price target for the first 10 minutes since entry trigger for BTC/USDT pair.\n if (\n pair == 'BTC/USDT' \n and entry_tag == 'long_sma200' \n and side == 'long' \n and (current_time - timedelta(minutes=10)) > trade.open_date_utc \n and order.filled == 0.0\n ):\n dataframe, _ = self.dp.get_analyzed_dataframe(pair=pair, timeframe=self.timeframe)\n current_candle = dataframe.iloc[-1].squeeze()\n # store information about entry adjustment\n existing_count = trade.get_custom_data('num_entry_adjustments', default=0)\n if not existing_count:\n existing_count = 1\n else:\n existing_count += 1\n trade.set_custom_data(key='num_entry_adjustments', value=existing_count)\n\n # adjust order price\n return current_candle['sma_200']\n\n # default: maintain existing order\n return current_order_rate\n\n def custom_exit(self, pair: str, trade: Trade, current_time: datetime, current_rate: float, current_profit: float, **kwargs):\n\n entry_adjustment_count = trade.get_custom_data(key='num_entry_adjustments')\n trade_entry_type = trade.get_custom_data(key='entry_type')\n if entry_adjustment_count is None:\n if current_profit > 0.01 and (current_time - timedelta(minutes=100) > trade.open_date_utc):\n return True, 'exit_1'\n else\n if entry_adjustment_count > 0 and if current_profit > 0.05:\n return True, 'exit_2'\n if trade_entry_type == 'breakout' and current_profit > 0.1:\n return True, 'exit_3\n\n return False, None\nThe above is a simple example - there are simpler ways to retrieve trade data like entry-adjustments.
Note
It is recommended that simple data types are used [bool, int, float, str] to ensure no issues when serializing the data that needs to be stored. Storing big junks of data may lead to unintended side-effects, like a database becoming big (and as a consequence, also slow).
Non-serializable data
If supplied data cannot be serialized a warning is logged and the entry for the specified key will contain None as data.
custom-data has the following accessors through the Trade object (assumed as trade below):
trade.get_custom_data(key='something', default=0) - Returns the actual value given in the type provided.trade.get_custom_data_entry(key='something') - Returns the entry - including metadata. The value is accessible via .value property.trade.set_custom_data(key='something', value={'some': 'value'}) - set or update the corresponding key for this trade. Value must be serializable - and we recommend to keep the stored data relatively small.\"value\" can be any type (both in setting and receiving) - but must be json serializable.
"},{"location":"strategy-advanced/#storing-information-non-persistent","title":"Storing information (Non-Persistent)","text":"Deprecated
This method of storing information is deprecated and we do advise against using non-persistent storage. Please use Persistent Storage instead.
It's content has therefore been collapsed.
Storing informationStoring information can be accomplished by creating a new dictionary within the strategy class.
The name of the variable can be chosen at will, but should be prefixed with custom_ to avoid naming collisions with predefined strategy variables.
class AwesomeStrategy(IStrategy):\n # Create custom dictionary\n custom_info = {}\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # Check if the entry already exists\n if not metadata[\"pair\"] in self.custom_info:\n # Create empty entry for this pair\n self.custom_info[metadata[\"pair\"]] = {}\n\n if \"crosstime\" in self.custom_info[metadata[\"pair\"]]:\n self.custom_info[metadata[\"pair\"]][\"crosstime\"] += 1\n else:\n self.custom_info[metadata[\"pair\"]][\"crosstime\"] = 1\nWarning
The data is not persisted after a bot-restart (or config-reload). Also, the amount of data should be kept smallish (no DataFrames and such), otherwise the bot will start to consume a lot of memory and eventually run out of memory and crash.
Note
If the data is pair-specific, make sure to use pair as one of the keys in the dictionary.
"},{"location":"strategy-advanced/#dataframe-access","title":"Dataframe access","text":"You may access dataframe in various strategy functions by querying it from dataprovider.
from freqtrade.exchange import timeframe_to_prev_date\n\nclass AwesomeStrategy(IStrategy):\n def confirm_trade_exit(self, pair: str, trade: 'Trade', order_type: str, amount: float,\n rate: float, time_in_force: str, exit_reason: str,\n current_time: 'datetime', **kwargs) -> bool:\n # Obtain pair dataframe.\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n\n # Obtain last available candle. Do not use current_time to look up latest candle, because \n # current_time points to current incomplete candle whose data is not available.\n last_candle = dataframe.iloc[-1].squeeze()\n # <...>\n\n # In dry/live runs trade open date will not match candle open date therefore it must be \n # rounded.\n trade_date = timeframe_to_prev_date(self.timeframe, trade.open_date_utc)\n # Look up trade candle.\n trade_candle = dataframe.loc[dataframe['date'] == trade_date]\n # trade_candle may be empty for trades that just opened as it is still incomplete.\n if not trade_candle.empty:\n trade_candle = trade_candle.squeeze()\n # <...>\nUsing .iloc[-1]
You can use .iloc[-1] here because get_analyzed_dataframe() only returns candles that backtesting is allowed to see. This will not work in populate_* methods, so make sure to not use .iloc[] in that area. Also, this will only work starting with version 2021.5.
When your strategy has multiple entry signals, you can name the signal that triggered. Then you can access your entry signal on custom_exit
def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe[\"enter_tag\"] = \"\"\n signal_rsi = (qtpylib.crossed_above(dataframe[\"rsi\"], 35))\n signal_bblower = (dataframe[\"bb_lowerband\"] < dataframe[\"close\"])\n # Additional conditions\n dataframe.loc[\n (\n signal_rsi\n | signal_bblower\n # ... additional signals to enter a long position\n )\n & (dataframe[\"volume\"] > 0)\n , \"enter_long\"\n ] = 1\n # Concatenate the tags so all signals are kept\n dataframe.loc[signal_rsi, \"enter_tag\"] += \"long_signal_rsi \"\n dataframe.loc[signal_bblower, \"enter_tag\"] += \"long_signal_bblower \"\n\n return dataframe\n\ndef custom_exit(self, pair: str, trade: Trade, current_time: datetime, current_rate: float,\n current_profit: float, **kwargs):\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n last_candle = dataframe.iloc[-1].squeeze()\n if \"long_signal_rsi\" in trade.enter_tag and last_candle[\"rsi\"] > 80:\n return \"exit_signal_rsi\"\n if \"long_signal_bblower\" in trade.enter_tag and last_candle[\"high\"] > last_candle[\"bb_upperband\"]:\n return \"exit_signal_bblower\"\n # ...\n return None\nNote
enter_tag is limited to 255 characters, remaining data will be truncated.
Warning
There is only one enter_tag column, which is used for both long and short trades. As a consequence, this column must be treated as \"last write wins\" (it's just a dataframe column after all). In fancy situations, where multiple signals collide (or if signals are deactivated again based on different conditions), this can lead to odd results with the wrong tag applied to an entry signal. These results are a consequence of the strategy overwriting prior tags - where the last tag will \"stick\" and will be the one freqtrade will use.
Similar to Entry Tagging, you can also specify an exit tag.
def populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe[\"exit_tag\"] = \"\"\n rsi_exit_signal = (dataframe[\"rsi\"] > 70)\n ema_exit_signal = (dataframe[\"ema20\"] < dataframe[\"ema50\"])\n # Additional conditions\n dataframe.loc[\n (\n rsi_exit_signal\n | ema_exit_signal\n # ... additional signals to exit a long position\n ) &\n (dataframe[\"volume\"] > 0)\n ,\n \"exit_long\"] = 1\n # Concatenate the tags so all signals are kept\n dataframe.loc[rsi_exit_signal, \"exit_tag\"] += \"exit_signal_rsi \"\n dataframe.loc[rsi_exit_signal2, \"exit_tag\"] += \"exit_signal_rsi \"\n\n return dataframe\nThe provided exit-tag is then used as exit-reason - and shown as such in backtest results.
Note
exit_reason is limited to 100 characters, remaining data will be truncated.
You can implement custom strategy versioning by using the \"version\" method, and returning the version you would like this strategy to have.
def version(self) -> str:\n \"\"\"\n Returns version of the strategy.\n \"\"\"\n return \"1.1\"\nNote
You should make sure to implement proper version control (like a git repository) alongside this, as freqtrade will not keep historic versions of your strategy, so it's up to the user to be able to eventually roll back to a prior version of the strategy.
"},{"location":"strategy-advanced/#derived-strategies","title":"Derived strategies","text":"The strategies can be derived from other strategies. This avoids duplication of your custom strategy code. You can use this technique to override small parts of your main strategy, leaving the rest untouched:
user_data/strategies/myawesomestrategy.pyclass MyAwesomeStrategy(IStrategy):\n ...\n stoploss = 0.13\n trailing_stop = False\n # All other attributes and methods are here as they\n # should be in any custom strategy...\n ...\nfrom myawesomestrategy import MyAwesomeStrategy\nclass MyAwesomeStrategy2(MyAwesomeStrategy):\n # Override something\n stoploss = 0.08\n trailing_stop = True\nBoth attributes and methods may be overridden, altering behavior of the original strategy in a way you need.
While keeping the subclass in the same file is technically possible, it can lead to some problems with hyperopt parameter files, we therefore recommend to use separate strategy files, and import the parent strategy as shown above.
"},{"location":"strategy-advanced/#embedding-strategies","title":"Embedding Strategies","text":"Freqtrade provides you with an easy way to embed the strategy into your configuration file. This is done by utilizing BASE64 encoding and providing this string at the strategy configuration field, in your chosen config file.
"},{"location":"strategy-advanced/#encoding-a-string-as-base64","title":"Encoding a string as BASE64","text":"This is a quick example, how to generate the BASE64 string in python
from base64 import urlsafe_b64encode\n\nwith open(file, 'r') as f:\n content = f.read()\ncontent = urlsafe_b64encode(content.encode('utf-8'))\nThe variable 'content', will contain the strategy file in a BASE64 encoded form. Which can now be set in your configurations file as following
\"strategy\": \"NameOfStrategy:BASE64String\"\nPlease ensure that 'NameOfStrategy' is identical to the strategy name!
"},{"location":"strategy-advanced/#performance-warning","title":"Performance warning","text":"When executing a strategy, one can sometimes be greeted by the following in the logs
PerformanceWarning: DataFrame is highly fragmented.
This is a warning from pandas and as the warning continues to say: use pd.concat(axis=1). This can have slight performance implications, which are usually only visible during hyperopt (when optimizing an indicator).
For example:
for val in self.buy_ema_short.range:\n dataframe[f'ema_short_{val}'] = ta.EMA(dataframe, timeperiod=val)\nshould be rewritten to
frames = [dataframe]\nfor val in self.buy_ema_short.range:\n frames.append(DataFrame({\n f'ema_short_{val}': ta.EMA(dataframe, timeperiod=val)\n }))\n\n# Combine all dataframes, and reassign the original dataframe column\ndataframe = pd.concat(frames, axis=1)\nFreqtrade does however also counter this by running dataframe.copy() on the dataframe right after the populate_indicators() method - so performance implications of this should be low to non-existent.
While the main strategy functions (populate_indicators(), populate_entry_trend(), populate_exit_trend()) should be used in a vectorized way, and are only called once during backtesting, callbacks are called \"whenever needed\".
As such, you should avoid doing heavy calculations in callbacks to avoid delays during operations. Depending on the callback used, they may be called when entering / exiting a trade, or throughout the duration of a trade.
Currently available callbacks:
bot_start()bot_loop_start()custom_stake_amount()custom_exit()custom_stoploss()custom_roi()custom_entry_price() and custom_exit_price()check_entry_timeout() and check_exit_timeout()confirm_trade_entry()confirm_trade_exit()adjust_trade_position()adjust_entry_price()leverage()order_filled()Callback calling sequence
You can find the callback calling sequence in bot-basics
"},{"location":"strategy-callbacks/#imports-necessary-for-a-strategy","title":"Imports necessary for a strategy","text":"When creating a strategy, you will need to import the necessary modules and classes. The following imports are required for a strategy:
By default, we recommend the following imports as a base line for your strategy: This will cover all imports necessary for freqtrade functions to work. Obviously you can add more imports as needed for your strategy.
# flake8: noqa: F401\n# isort: skip_file\n# --- Do not remove these imports ---\nimport numpy as np\nimport pandas as pd\nfrom datetime import datetime, timedelta, timezone\nfrom pandas import DataFrame\nfrom typing import Dict, Optional, Union, Tuple\n\nfrom freqtrade.strategy import (\n IStrategy,\n Trade, \n Order,\n PairLocks,\n informative, # @informative decorator\n # Hyperopt Parameters\n BooleanParameter,\n CategoricalParameter,\n DecimalParameter,\n IntParameter,\n RealParameter,\n # timeframe helpers\n timeframe_to_minutes,\n timeframe_to_next_date,\n timeframe_to_prev_date,\n # Strategy helper functions\n merge_informative_pair,\n stoploss_from_absolute,\n stoploss_from_open,\n)\n\n# --------------------------------\n# Add your lib to import here\nimport talib.abstract as ta\nfrom technical import qtpylib\nFreqtrade allows your strategy to implement different exit logic using signal-based or callback-based functions. This section aims to compare each different function, helping you to choose the one that best fits your needs.
populate_exit_trend() - Vectorized signal-based exit logic using indicators in the main dataframe \u2705 Use to define exit signals based on indicators or other data that can be calculated in a vectorized manner. \ud83d\udeab Don't use to customize exit conditions for each individual trade, or if trade data is necessary to make an exit decision.custom_exit() - Custom exit logic that will fully exit a trade immediately, called for every open trade at every bot loop iteration until a trade is closed. \u2705 Use to specify exit conditions for each individual trade (including any additional adjusted orders using adjust_trade_position()), or if trade data is necessary to make an exit decision, e.g. using profit data to exit. \ud83d\udeab Don't use when you want to exit using vectorised indicator-based data (use a populate_exit_trend() signal instead), or as a proxy for custom_stoploss(), and be aware that rate-based exits in backtesting can be inaccurate.custom_stoploss() - Custom trailing stoploss, called for every open trade every iteration until a trade is closed. The value returned here is also used for stoploss on exchange. \u2705 Use to customize the stoploss logic to set a dynamic stoploss based on trade data or other conditions. \ud83d\udeab Don't use to exit a trade immediately based on a specific condition. Use custom_exit() for that purpose.custom_roi() - Custom ROI, called for every open trade every iteration until a trade is closed. \u2705 Use to specify a minimum ROI threshold (\"take-profit\") to exit a trade at this ROI level at some point within the trade duration, based on profit or other conditions. \ud83d\udeab Don't use to exit a trade immediately based on a specific condition. Use custom_exit(). \ud83d\udeab Don't use for static ROI. Use minimal_roi.A simple callback which is called once when the strategy is loaded. This can be used to perform actions that must only be performed once and runs after dataprovider and wallet are set
import requests\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n def bot_start(self, **kwargs) -> None:\n \"\"\"\n Called only once after bot instantiation.\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n \"\"\"\n if self.config[\"runmode\"].value in (\"live\", \"dry_run\"):\n # Assign this to the class by using self.*\n # can then be used by populate_* methods\n self.custom_remote_data = requests.get(\"https://some_remote_source.example.com\")\nDuring hyperopt, this runs only once at startup.
"},{"location":"strategy-callbacks/#bot-loop-start","title":"Bot loop start","text":"A simple callback which is called once at the start of every bot throttling iteration in dry/live mode (roughly every 5 seconds, unless configured differently) or once per candle in backtest/hyperopt mode. This can be used to perform calculations which are pair independent (apply to all pairs), loading of external data, etc.
# Default imports\nimport requests\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n def bot_loop_start(self, current_time: datetime, **kwargs) -> None:\n \"\"\"\n Called at the start of the bot iteration (one loop).\n Might be used to perform pair-independent tasks\n (e.g. gather some remote resource for comparison)\n :param current_time: datetime object, containing the current datetime\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n \"\"\"\n if self.config[\"runmode\"].value in (\"live\", \"dry_run\"):\n # Assign this to the class by using self.*\n # can then be used by populate_* methods\n self.remote_data = requests.get(\"https://some_remote_source.example.com\")\nCalled before entering a trade, makes it possible to manage your position size when placing a new trade.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n def custom_stake_amount(self, pair: str, current_time: datetime, current_rate: float,\n proposed_stake: float, min_stake: float | None, max_stake: float,\n leverage: float, entry_tag: str | None, side: str,\n **kwargs) -> float:\n\n dataframe, _ = self.dp.get_analyzed_dataframe(pair=pair, timeframe=self.timeframe)\n current_candle = dataframe.iloc[-1].squeeze()\n\n if current_candle[\"fastk_rsi_1h\"] > current_candle[\"fastd_rsi_1h\"]:\n if self.config[\"stake_amount\"] == \"unlimited\":\n # Use entire available wallet during favorable conditions when in compounding mode.\n return max_stake\n else:\n # Compound profits during favorable conditions instead of using a static stake.\n return self.wallets.get_total_stake_amount() / self.config[\"max_open_trades\"]\n\n # Use default stake amount.\n return proposed_stake\nFreqtrade will fall back to the proposed_stake value should your code raise an exception. The exception itself will be logged.
Tip
You do not have to ensure that min_stake <= returned_value <= max_stake. Trades will succeed as the returned value will be clamped to supported range and this action will be logged.
Tip
Returning 0 or None will prevent trades from being placed.
Called for open trade every throttling iteration (roughly every 5 seconds) until a trade is closed.
Allows to define custom exit signals, indicating that specified position should be closed (full exit). This is very useful when we need to customize exit conditions for each individual trade, or if you need trade data to make an exit decision.
For example you could implement a 1:2 risk-reward ROI with custom_exit().
Using custom_exit() signals in place of stoploss though is not recommended. It is a inferior method to using custom_stoploss() in this regard - which also allows you to keep the stoploss on exchange.
Note
Returning a (none-empty) string or True from this method is equal to setting exit signal on a candle at specified time. This method is not called when exit signal is set already, or if exit signals are disabled (use_exit_signal=False). string max length is 64 characters. Exceeding this limit will cause the message to be truncated to 64 characters. custom_exit() will ignore exit_profit_only, and will always be called unless use_exit_signal=False, even if there is a new enter signal.
An example of how we can use different indicators depending on the current profit and also exit trades that were open longer than one day:
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n def custom_exit(self, pair: str, trade: Trade, current_time: datetime, current_rate: float,\n current_profit: float, **kwargs):\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n last_candle = dataframe.iloc[-1].squeeze()\n\n # Above 20% profit, sell when rsi < 80\n if current_profit > 0.2:\n if last_candle[\"rsi\"] < 80:\n return \"rsi_below_80\"\n\n # Between 2% and 10%, sell if EMA-long above EMA-short\n if 0.02 < current_profit < 0.1:\n if last_candle[\"emalong\"] > last_candle[\"emashort\"]:\n return \"ema_long_below_80\"\n\n # Sell any positions at a loss if they are held for more than one day.\n if current_profit < 0.0 and (current_time - trade.open_date_utc).days >= 1:\n return \"unclog\"\nSee Dataframe access for more information about dataframe use in strategy callbacks.
"},{"location":"strategy-callbacks/#custom-stoploss","title":"Custom stoploss","text":"Called for open trade every iteration (roughly every 5 seconds) until a trade is closed.
The usage of the custom stoploss method must be enabled by setting use_custom_stoploss=True on the strategy object.
The stoploss price can only ever move upwards - if the stoploss value returned from custom_stoploss would result in a lower stoploss price than was previously set, it will be ignored. The traditional stoploss value serves as an absolute lower level and will be instated as the initial stoploss (before this method is called for the first time for a trade), and is still mandatory. As custom stoploss acts as regular, changing stoploss, it will behave similar to trailing_stop - and trades exiting due to this will have the exit_reason of \"trailing_stop_loss\".
The method must return a stoploss value (float / number) as a percentage of the current price. E.g. If the current_rate is 200 USD, then returning 0.02 will set the stoploss price 2% lower, at 196 USD. During backtesting, current_rate (and current_profit) are provided against the candle's high (or low for short trades) - while the resulting stoploss is evaluated against the candle's low (or high for short trades).
The absolute value of the return value is used (the sign is ignored), so returning 0.05 or -0.05 have the same result, a stoploss 5% below the current price. Returning None will be interpreted as \"no desire to change\", and is the only safe way to return when you'd like to not modify the stoploss. NaN and inf values are considered invalid and will be ignored (identical to None).
Stoploss on exchange works similar to trailing_stop, and the stoploss on exchange is updated as configured in stoploss_on_exchange_interval (More details about stoploss on exchange).
If you're on futures markets, please take note of the stoploss and leverage section, as the stoploss value returned from custom_stoploss is the risk for this trade - not the relative price movement.
Use of dates
All time-based calculations should be done based on current_time - using datetime.now() or datetime.utcnow() is discouraged, as this will break backtesting support.
Trailing stoploss
It's recommended to disable trailing_stop when using custom stoploss values. Both can work in tandem, but you might encounter the trailing stop to move the price higher while your custom function would not want this, causing conflicting behavior.
Depending on your strategy, you may encounter the need to adjust the stoploss in both directions after a position adjustment. For this, freqtrade will make an additional call with after_fill=True after an order fills, which will allow the strategy to move the stoploss in any direction (also widening the gap between stoploss and current price, which is otherwise forbidden).
backwards compatibility
This call will only be made if the after_fill parameter is part of the function definition of your custom_stoploss function. As such, this will not impact (and with that, surprise) existing, running strategies.
The next section will show some examples on what's possible with the custom stoploss function. Of course, many more things are possible, and all examples can be combined at will.
"},{"location":"strategy-callbacks/#trailing-stop-via-custom-stoploss","title":"Trailing stop via custom stoploss","text":"To simulate a regular trailing stoploss of 4% (trailing 4% behind the maximum reached price) you would use the following very simple method:
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool, \n **kwargs) -> float | None:\n \"\"\"\n Custom stoploss logic, returning the new distance relative to current_rate (as ratio).\n e.g. returning -0.05 would create a stoploss 5% below current_rate.\n The custom stoploss can never be below self.stoploss, which serves as a hard maximum loss.\n\n For full documentation please go to https://www.freqtrade.io/en/latest/strategy-advanced/\n\n When not implemented by a strategy, returns the initial stoploss value.\n Only called when use_custom_stoploss is set to True.\n\n :param pair: Pair that's currently analyzed\n :param trade: trade object.\n :param current_time: datetime object, containing the current datetime\n :param current_rate: Rate, calculated based on pricing settings in exit_pricing.\n :param current_profit: Current profit (as ratio), calculated based on current_rate.\n :param after_fill: True if the stoploss is called after the order was filled.\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n :return float: New stoploss value, relative to the current_rate\n \"\"\"\n return -0.04 * trade.leverage\nUse the initial stoploss for the first 60 minutes, after this change to 10% trailing stoploss, and after 2 hours (120 minutes) we use a 5% trailing stoploss.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool, \n **kwargs) -> float | None:\n\n # Make sure you have the longest interval first - these conditions are evaluated from top to bottom.\n if current_time - timedelta(minutes=120) > trade.open_date_utc:\n return -0.05 * trade.leverage\n elif current_time - timedelta(minutes=60) > trade.open_date_utc:\n return -0.10 * trade.leverage\n return None\nUse the initial stoploss for the first 60 minutes, after this change to 10% trailing stoploss, and after 2 hours (120 minutes) we use a 5% trailing stoploss. If an additional order fills, set stoploss to -10% below the new open_rate (Averaged across all entries).
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool, \n **kwargs) -> float | None:\n\n if after_fill: \n # After an additional order, start with a stoploss of 10% below the new open rate\n return stoploss_from_open(0.10, current_profit, is_short=trade.is_short, leverage=trade.leverage)\n # Make sure you have the longest interval first - these conditions are evaluated from top to bottom.\n if current_time - timedelta(minutes=120) > trade.open_date_utc:\n return -0.05 * trade.leverage\n elif current_time - timedelta(minutes=60) > trade.open_date_utc:\n return -0.10 * trade.leverage\n return None\nUse a different stoploss depending on the pair. In this example, we'll trail the highest price with 10% trailing stoploss for ETH/BTC and XRP/BTC, with 5% trailing stoploss for LTC/BTC and with 15% for all other pairs.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool,\n **kwargs) -> float | None:\n\n if pair in (\"ETH/BTC\", \"XRP/BTC\"):\n return -0.10 * trade.leverage\n elif pair in (\"LTC/BTC\"):\n return -0.05 * trade.leverage\n return -0.15 * trade.leverage\nUse the initial stoploss until the profit is above 4%, then use a trailing stoploss of 50% of the current profit with a minimum of 2.5% and a maximum of 5%.
Please note that the stoploss can only increase, values lower than the current stoploss are ignored.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool,\n **kwargs) -> float | None:\n\n if current_profit < 0.04:\n return None # return None to keep using the initial stoploss\n\n # After reaching the desired offset, allow the stoploss to trail by half the profit\n desired_stoploss = current_profit / 2\n\n # Use a minimum of 2.5% and a maximum of 5%\n return max(min(desired_stoploss, 0.05), 0.025) * trade.leverage\nInstead of continuously trailing behind the current price, this example sets fixed stoploss price levels based on the current profit.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool,\n **kwargs) -> float | None:\n\n # evaluate highest to lowest, so that highest possible stop is used\n if current_profit > 0.40:\n return stoploss_from_open(0.25, current_profit, is_short=trade.is_short, leverage=trade.leverage)\n elif current_profit > 0.25:\n return stoploss_from_open(0.15, current_profit, is_short=trade.is_short, leverage=trade.leverage)\n elif current_profit > 0.20:\n return stoploss_from_open(0.07, current_profit, is_short=trade.is_short, leverage=trade.leverage)\n\n # return maximum stoploss value, keeping current stoploss price unchanged\n return None\nAbsolute stoploss value may be derived from indicators stored in dataframe. Example uses parabolic SAR below the price as stoploss.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # <...>\n dataframe[\"sar\"] = ta.SAR(dataframe)\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool,\n **kwargs) -> float | None:\n\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n last_candle = dataframe.iloc[-1].squeeze()\n\n # Use parabolic sar as absolute stoploss price\n stoploss_price = last_candle[\"sar\"]\n\n # Convert absolute price to percentage relative to current_rate\n if stoploss_price < current_rate:\n return stoploss_from_absolute(stoploss_price, current_rate, is_short=trade.is_short)\n\n # return maximum stoploss value, keeping current stoploss price unchanged\n return None\nSee Dataframe access for more information about dataframe use in strategy callbacks.
"},{"location":"strategy-callbacks/#common-helpers-for-stoploss-calculations","title":"Common helpers for stoploss calculations","text":""},{"location":"strategy-callbacks/#stoploss-relative-to-open-price","title":"Stoploss relative to open price","text":"Stoploss values returned from custom_stoploss() must specify a percentage relative to current_rate, but sometimes you may want to specify a stoploss relative to the entry price instead. stoploss_from_open() is a helper function to calculate a stoploss value that can be returned from custom_stoploss which will be equivalent to the desired trade profit above the entry point.
Say the open price was $100, and current_price is $121 (current_profit will be 0.21).
If we want a stop price at 7% above the open price we can call stoploss_from_open(0.07, current_profit, False) which will return 0.1157024793. 11.57% below $121 is $107, which is the same as 7% above $100.
This function will consider leverage - so at 10x leverage, the actual stoploss would be 0.7% above $100 (0.7% * 10x = 7%).
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool,\n **kwargs) -> float | None:\n\n # once the profit has risen above 10%, keep the stoploss at 7% above the open price\n if current_profit > 0.10:\n return stoploss_from_open(0.07, current_profit, is_short=trade.is_short, leverage=trade.leverage)\n\n return 1\nFull examples can be found in the Custom stoploss section of the Documentation.
Note
Providing invalid input to stoploss_from_open() may produce \"CustomStoploss function did not return valid stoploss\" warnings. This may happen if current_profit parameter is below specified open_relative_stop. Such situations may arise when closing trade is blocked by confirm_trade_exit() method. Warnings can be solved by never blocking stop loss sells by checking exit_reason in confirm_trade_exit(), or by using return stoploss_from_open(...) or 1 idiom, which will request to not change stop loss when current_profit < open_relative_stop.
Stoploss values returned from custom_stoploss() always specify a percentage relative to current_rate. In order to set a stoploss at specified absolute price level, we need to use stop_rate to calculate what percentage relative to the current_rate will give you the same result as if the percentage was specified from the open price.
The helper function stoploss_from_absolute() can be used to convert from an absolute price, to a current price relative stop which can be returned from custom_stoploss().
If we want to trail a stop price at 2xATR below current price we can call stoploss_from_absolute(current_rate + (side * candle[\"atr\"] * 2), current_rate=current_rate, is_short=trade.is_short, leverage=trade.leverage). For futures, we need to adjust the direction (up or down), as well as adjust for leverage, since the custom_stoploss callback returns the \"risk for this trade\" - not the relative price movement.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n use_custom_stoploss = True\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe[\"atr\"] = ta.ATR(dataframe, timeperiod=14)\n return dataframe\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool,\n **kwargs) -> float | None:\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n trade_date = timeframe_to_prev_date(self.timeframe, trade.open_date_utc)\n candle = dataframe.iloc[-1].squeeze()\n side = 1 if trade.is_short else -1\n return stoploss_from_absolute(current_rate + (side * candle[\"atr\"] * 2), \n current_rate=current_rate, \n is_short=trade.is_short,\n leverage=trade.leverage)\nCalled for open trade every iteration (roughly every 5 seconds) until a trade is closed.
The usage of the custom ROI method must be enabled by setting use_custom_roi=True on the strategy object.
This method allows you to define a custom minimum ROI threshold for exiting a trade, expressed as a ratio (e.g., 0.05 for 5% profit). If both minimal_roi and custom_roi are defined, the lower of the two thresholds will trigger an exit. For example, if minimal_roi is set to {\"0\": 0.10} (10% at 0 minutes) and custom_roi returns 0.05, the trade will exit when the profit reaches 5%. Also, if custom_roi returns 0.10 and minimal_roi is set to {\"0\": 0.05} (5% at 0 minutes), the trade will be closed when the profit reaches 5%.
The method must return a float representing the new ROI threshold as a ratio, or None to fall back to the minimal_roi logic. Returning NaN or inf values is considered invalid and will be treated as None, causing the bot to use the minimal_roi configuration.
The following examples illustrate how to use the custom_roi function to implement different ROI logics.
Use different ROI thresholds depending on the side. In this example, 5% for long entries and 2% for short entries.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n use_custom_roi = True\n\n # ... populate_* methods\n\n def custom_roi(self, pair: str, trade: Trade, current_time: datetime, trade_duration: int,\n entry_tag: str | None, side: str, **kwargs) -> float | None:\n \"\"\"\n Custom ROI logic, returns a new minimum ROI threshold (as a ratio, e.g., 0.05 for +5%).\n Only called when use_custom_roi is set to True.\n\n If used at the same time as minimal_roi, an exit will be triggered when the lower\n threshold is reached. Example: If minimal_roi = {\"0\": 0.01} and custom_roi returns 0.05,\n an exit will be triggered if profit reaches 5%.\n\n :param pair: Pair that's currently analyzed.\n :param trade: trade object.\n :param current_time: datetime object, containing the current datetime.\n :param trade_duration: Current trade duration in minutes.\n :param entry_tag: Optional entry_tag (buy_tag) if provided with the buy signal.\n :param side: 'long' or 'short' - indicating the direction of the current trade.\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n :return float: New ROI value as a ratio, or None to fall back to minimal_roi logic.\n \"\"\"\n return 0.05 if side == \"long\" else 0.02\nUse different ROI thresholds depending on the pair.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n use_custom_roi = True\n\n # ... populate_* methods\n\n def custom_roi(self, pair: str, trade: Trade, current_time: datetime, trade_duration: int,\n entry_tag: str | None, side: str, **kwargs) -> float | None:\n\n stake = trade.stake_currency\n roi_map = {\n f\"BTC/{stake}\": 0.02, # 2% for BTC\n f\"ETH/{stake}\": 0.03, # 3% for ETH\n f\"XRP/{stake}\": 0.04, # 4% for XRP\n }\n\n return roi_map.get(pair, 0.01) # 1% for any other pair\nUse different ROI thresholds depending on the entry_tag provided with the buy signal.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n use_custom_roi = True\n\n # ... populate_* methods\n\n def custom_roi(self, pair: str, trade: Trade, current_time: datetime, trade_duration: int,\n entry_tag: str | None, side: str, **kwargs) -> float | None:\n\n roi_by_tag = {\n \"breakout\": 0.08, # 8% if tag is \"breakout\"\n \"rsi_overbought\": 0.05, # 5% if tag is \"rsi_overbought\"\n \"mean_reversion\": 0.03, # 3% if tag is \"mean_reversion\"\n }\n\n return roi_by_tag.get(entry_tag, 0.01) # 1% if tag is unknown\nROI value may be derived from indicators stored in dataframe. This example uses the ATR ratio as ROI.
# Default imports\n# <...>\nimport talib.abstract as ta\n\nclass AwesomeStrategy(IStrategy):\n\n use_custom_roi = True\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # <...>\n dataframe[\"atr\"] = ta.ATR(dataframe, timeperiod=10)\n\n def custom_roi(self, pair: str, trade: Trade, current_time: datetime, trade_duration: int,\n entry_tag: str | None, side: str, **kwargs) -> float | None:\n\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n last_candle = dataframe.iloc[-1].squeeze()\n atr_ratio = last_candle[\"atr\"] / last_candle[\"close\"]\n\n return atr_ratio # Returns the ATR value as ratio\nBy default, freqtrade use the orderbook to automatically set an order price(Relevant documentation), you also have the option to create custom order prices based on your strategy.
You can use this feature by creating a custom_entry_price() function in your strategy file to customize entry prices and custom_exit_price() for exits.
Each of these methods are called right before placing an order on the exchange.
Note
If your custom pricing function return None or an invalid value, price will fall back to proposed_rate, which is based on the regular pricing configuration.
Note
Using custom_entry_price, the Trade object will be available as soon as the first entry order associated with the trade is created, for the first entry, trade parameter value will be None.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n def custom_entry_price(self, pair: str, trade: Trade | None, current_time: datetime, proposed_rate: float,\n entry_tag: str | None, side: str, **kwargs) -> float:\n\n dataframe, last_updated = self.dp.get_analyzed_dataframe(pair=pair,\n timeframe=self.timeframe)\n new_entryprice = dataframe[\"bollinger_10_lowerband\"].iat[-1]\n\n return new_entryprice\n\n def custom_exit_price(self, pair: str, trade: Trade,\n current_time: datetime, proposed_rate: float,\n current_profit: float, exit_tag: str | None, **kwargs) -> float:\n\n dataframe, last_updated = self.dp.get_analyzed_dataframe(pair=pair,\n timeframe=self.timeframe)\n new_exitprice = dataframe[\"bollinger_10_upperband\"].iat[-1]\n\n return new_exitprice\nWarning
Modifying entry and exit prices will only work for limit orders. Depending on the price chosen, this can result in a lot of unfilled orders. By default the maximum allowed distance between the current price and the custom price is 2%, this value can be changed in config with the custom_price_max_distance_ratio parameter. Example: If the new_entryprice is 97, the proposed_rate is 100 and the custom_price_max_distance_ratio is set to 2%, The retained valid custom entry price will be 98, which is 2% below the current (proposed) rate.
Backtesting
Custom prices are supported in backtesting (starting with 2021.12), and orders will fill if the price falls within the candle's low/high range. Orders that don't fill immediately are subject to regular timeout handling, which happens once per (detail) candle. custom_exit_price() is only called for sells of type exit_signal, Custom exit and partial exits. All other exit-types will use regular backtesting prices.
Simple, time-based order-timeouts can be configured either via strategy or in the configuration in the unfilledtimeout section.
However, freqtrade also offers a custom callback for both order types, which allows you to decide based on custom criteria if an order did time out or not.
Note
Backtesting fills orders if their price falls within the candle's low/high range. The below callbacks will be called once per (detail) candle for orders that don't fill immediately (which use custom pricing).
"},{"location":"strategy-callbacks/#custom-order-timeout-example","title":"Custom order timeout example","text":"Called for every open order until that order is either filled or cancelled. check_entry_timeout() is called for trade entries, while check_exit_timeout() is called for trade exit orders.
A simple example, which applies different unfilled-timeouts depending on the price of the asset can be seen below. It applies a tight timeout for higher priced assets, while allowing more time to fill on cheap coins.
The function must return either True (cancel order) or False (keep order alive).
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n # Set unfilledtimeout to 25 hours, since the maximum timeout from below is 24 hours.\n unfilledtimeout = {\n \"entry\": 60 * 25,\n \"exit\": 60 * 25\n }\n\n def check_entry_timeout(self, pair: str, trade: Trade, order: Order,\n current_time: datetime, **kwargs) -> bool:\n if trade.open_rate > 100 and trade.open_date_utc < current_time - timedelta(minutes=5):\n return True\n elif trade.open_rate > 10 and trade.open_date_utc < current_time - timedelta(minutes=3):\n return True\n elif trade.open_rate < 1 and trade.open_date_utc < current_time - timedelta(hours=24):\n return True\n return False\n\n\n def check_exit_timeout(self, pair: str, trade: Trade, order: Order,\n current_time: datetime, **kwargs) -> bool:\n if trade.open_rate > 100 and trade.open_date_utc < current_time - timedelta(minutes=5):\n return True\n elif trade.open_rate > 10 and trade.open_date_utc < current_time - timedelta(minutes=3):\n return True\n elif trade.open_rate < 1 and trade.open_date_utc < current_time - timedelta(hours=24):\n return True\n return False\nNote
For the above example, unfilledtimeout must be set to something bigger than 24h, otherwise that type of timeout will apply first.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n # Set unfilledtimeout to 25 hours, since the maximum timeout from below is 24 hours.\n unfilledtimeout = {\n \"entry\": 60 * 25,\n \"exit\": 60 * 25\n }\n\n def check_entry_timeout(self, pair: str, trade: Trade, order: Order,\n current_time: datetime, **kwargs) -> bool:\n ob = self.dp.orderbook(pair, 1)\n current_price = ob[\"bids\"][0][0]\n # Cancel buy order if price is more than 2% above the order.\n if current_price > order.price * 1.02:\n return True\n return False\n\n\n def check_exit_timeout(self, pair: str, trade: Trade, order: Order,\n current_time: datetime, **kwargs) -> bool:\n ob = self.dp.orderbook(pair, 1)\n current_price = ob[\"asks\"][0][0]\n # Cancel sell order if price is more than 2% below the order.\n if current_price < order.price * 0.98:\n return True\n return False\nConfirm trade entry / exits. This are the last methods that will be called before an order is placed.
"},{"location":"strategy-callbacks/#trade-entry-buy-order-confirmation","title":"Trade entry (buy order) confirmation","text":"confirm_trade_entry() can be used to abort a trade entry at the latest second (maybe because the price is not what we expect).
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n def confirm_trade_entry(self, pair: str, order_type: str, amount: float, rate: float,\n time_in_force: str, current_time: datetime, entry_tag: str | None,\n side: str, **kwargs) -> bool:\n \"\"\"\n Called right before placing a entry order.\n Timing for this function is critical, so avoid doing heavy computations or\n network requests in this method.\n\n For full documentation please go to https://www.freqtrade.io/en/latest/strategy-advanced/\n\n When not implemented by a strategy, returns True (always confirming).\n\n :param pair: Pair that's about to be bought/shorted.\n :param order_type: Order type (as configured in order_types). usually limit or market.\n :param amount: Amount in target (base) currency that's going to be traded.\n :param rate: Rate that's going to be used when using limit orders \n or current rate for market orders.\n :param time_in_force: Time in force. Defaults to GTC (Good-til-cancelled).\n :param current_time: datetime object, containing the current datetime\n :param entry_tag: Optional entry_tag (buy_tag) if provided with the buy signal.\n :param side: \"long\" or \"short\" - indicating the direction of the proposed trade\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n :return bool: When True is returned, then the buy-order is placed on the exchange.\n False aborts the process\n \"\"\"\n return True\nconfirm_trade_exit() can be used to abort a trade exit (sell) at the latest second (maybe because the price is not what we expect).
confirm_trade_exit() may be called multiple times within one iteration for the same trade if different exit-reasons apply. The exit-reasons (if applicable) will be in the following sequence:
exit_signal / custom_exitstop_lossroitrailing_stop_loss# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n def confirm_trade_exit(self, pair: str, trade: Trade, order_type: str, amount: float,\n rate: float, time_in_force: str, exit_reason: str,\n current_time: datetime, **kwargs) -> bool:\n \"\"\"\n Called right before placing a regular exit order.\n Timing for this function is critical, so avoid doing heavy computations or\n network requests in this method.\n\n For full documentation please go to https://www.freqtrade.io/en/latest/strategy-advanced/\n\n When not implemented by a strategy, returns True (always confirming).\n\n :param pair: Pair for trade that's about to be exited.\n :param trade: trade object.\n :param order_type: Order type (as configured in order_types). usually limit or market.\n :param amount: Amount in base currency.\n :param rate: Rate that's going to be used when using limit orders\n or current rate for market orders.\n :param time_in_force: Time in force. Defaults to GTC (Good-til-cancelled).\n :param exit_reason: Exit reason.\n Can be any of [\"roi\", \"stop_loss\", \"stoploss_on_exchange\", \"trailing_stop_loss\",\n \"exit_signal\", \"force_exit\", \"emergency_exit\"]\n :param current_time: datetime object, containing the current datetime\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n :return bool: When True, then the exit-order is placed on the exchange.\n False aborts the process\n \"\"\"\n if exit_reason == \"force_exit\" and trade.calc_profit_ratio(rate) < 0:\n # Reject force-sells with negative profit\n # This is just a sample, please adjust to your needs\n # (this does not necessarily make sense, assuming you know when you're force-selling)\n return False\n return True\nWarning
confirm_trade_exit() can prevent stoploss exits, causing significant losses as this would ignore stoploss exits. confirm_trade_exit() will not be called for Liquidations - as liquidations are forced by the exchange, and therefore cannot be rejected.
The position_adjustment_enable strategy property enables the usage of adjust_trade_position() callback in the strategy. For performance reasons, it's disabled by default and freqtrade will show a warning message on startup if enabled. adjust_trade_position() can be used to perform additional orders, for example to manage risk with DCA (Dollar Cost Averaging) or to increase or decrease positions.
Additional orders also result in additional fees and those orders don't count towards max_open_trades.
This callback is also called when there is an open order (either buy or sell) waiting for execution - and will cancel the existing open order to place a new order if the amount, price or direction is different. Also partially filled orders will be canceled, and will be replaced with the new amount as returned by the callback.
adjust_trade_position() is called very frequently for the duration of a trade, so you must keep your implementation as performant as possible.
Position adjustments will always be applied in the direction of the trade, so a positive value will always increase your position (negative values will decrease your position), no matter if it's a long or short trade. Adjustment orders can be assigned with a tag by returning a 2 element Tuple, with the first element being the adjustment amount, and the 2nd element the tag (e.g. return 250, \"increase_favorable_conditions\").
Modifications to leverage are not possible, and the stake-amount returned is assumed to be before applying leverage.
The combined stake currently allocated to the position is held in trade.stake_amount. Therefore trade.stake_amount will always be updated on every additional entry and partial exit made through adjust_trade_position().
Loose Logic
On dry and live run, this function will be called every throttle_process_secs (default to 5s). If you have a loose logic, (e.g. increase position if RSI of the last candle is below 30), your bot will do extra re-entry every 5 secs until you either it run out of money, hit the max_position_adjustment limit, or a new candle with RSI more than 30 arrived.
Same thing also can happen with partial exit. So be sure to have a strict logic and/or check for the last filled order and if an order is already open.
Performance with many position adjustments
Position adjustments can be a good approach to increase a strategy's output - but it can also have drawbacks if using this feature extensively. Each of the orders will be attached to the trade object for the duration of the trade - hence increasing memory usage. Trades with long duration and 10s or even 100ds of position adjustments are therefore not recommended, and should be closed at regular intervals to not affect performance.
Backtesting
During backtesting this callback is called for each candle in timeframe or timeframe_detail, so run-time performance will be affected. This can also cause deviating results between live and backtesting, since backtesting can adjust the trade only once per candle, whereas live could adjust the trade multiple times per candle.
The strategy is expected to return a positive stake_amount (in stake currency) between min_stake and max_stake if and when an additional entry order should be made (position is increased -> buy order for long trades, sell order for short trades).
If there are not enough funds in the wallet (the return value is above max_stake) then the signal will be ignored. max_entry_position_adjustment property is used to limit the number of additional entries per trade (on top of the first entry order) that the bot can execute. By default, the value is -1 which means the bot have no limit on number of adjustment entries.
Additional entries are ignored once you have reached the maximum amount of extra entries that you have set on max_entry_position_adjustment, but the callback is called anyway looking for partial exits.
About stake size
Using fixed stake size means it will be the amount used for the first order, just like without position adjustment. If you wish to buy additional orders with DCA, then make sure to leave enough funds in the wallet for that. Using \"unlimited\" stake amount with DCA orders requires you to also implement the custom_stake_amount() callback to avoid allocating all funds to the initial order.
The strategy is expected to return a negative stake_amount (in stake currency) for a partial exit. Returning the full owned stake at that point (-trade.stake_amount) results in a full exit. Returning a value more than the above (so remaining stake_amount would become negative) will result in the bot ignoring the signal.
For a partial exit, it's important to know that the formula used to calculate the amount of the coin for the partial exit order is amount to be exited partially = negative_stake_amount * trade.amount / trade.stake_amount, where negative_stake_amount is the value returned from the adjust_trade_position function. As seen in the formula, the formula doesn't care about current profit/loss of the position. It only cares about trade.amount and trade.stake_amount which aren't affected by the price movement at all.
For example, let's say you buy 2 SHITCOIN/USDT at open rate of 50, which means the trade's stake amount is 100 USDT. Now the price raises to 200 and you want to sell half of it. In that case, you have to return -50% of trade.stake_amount (0.5 * 100 USDT) which equals to -50. The bot will calculate the amount it needed to sell, which is 50 * 2 / 100 which equals 1 SHITCOIN/USDT. If you return -200 (50% of 2 * 200), the bot will ignore it since trade.stake_amount is only 100 USDT but you asked to sell 200 USDT which means you are asking to sell 4 SHITCOIN/USDT.
Back to the example above, since current rate is 200, the current USDT value of your trade is now 400 USDT. Let's say you want to partially sell 100 USDT to take out the initial investment and leave the profit in the trade hoping that the price keeps rising. In that case, you have to do a different approach. First, you need to calculate the exact amount you needed to sell. In this case, since you want to sell 100 USDT worth based of current rate, the exact amount you need to partially sell is 100 * 2 / 400 which equals 0.5 SHITCOIN/USDT. Since we know now the exact amount we want to sell (0.5), the value you need to return in the adjust_trade_position function is -amount to be exited partially * trade.stake_amount / trade.amount, which equals -25. The bot will sell 0.5 SHITCOIN/USDT, keeping 1.5 in trade. You will receive 100 USDT from the partial exit.
Stoploss calculation
Stoploss is still calculated from the initial opening price, not averaged price. Regular stoploss rules still apply (cannot move down).
While /stopentry command stops the bot from entering new trades, the position adjustment feature will continue buying new orders on existing trades.
# Default imports\n\nclass DigDeeperStrategy(IStrategy):\n\n position_adjustment_enable = True\n\n # Attempts to handle large drops with DCA. High stoploss is required.\n stoploss = -0.30\n\n # ... populate_* methods\n\n # Example specific variables\n max_entry_position_adjustment = 3\n # This number is explained a bit further down\n max_dca_multiplier = 5.5\n\n # This is called when placing the initial order (opening trade)\n def custom_stake_amount(self, pair: str, current_time: datetime, current_rate: float,\n proposed_stake: float, min_stake: float | None, max_stake: float,\n leverage: float, entry_tag: str | None, side: str,\n **kwargs) -> float:\n\n # We need to leave most of the funds for possible further DCA orders\n # This also applies to fixed stakes\n return proposed_stake / self.max_dca_multiplier\n\n def adjust_trade_position(self, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float,\n min_stake: float | None, max_stake: float,\n current_entry_rate: float, current_exit_rate: float,\n current_entry_profit: float, current_exit_profit: float,\n **kwargs\n ) -> float | None | tuple[float | None, str | None]:\n \"\"\"\n Custom trade adjustment logic, returning the stake amount that a trade should be\n increased or decreased.\n This means extra entry or exit orders with additional fees.\n Only called when `position_adjustment_enable` is set to True.\n\n For full documentation please go to https://www.freqtrade.io/en/latest/strategy-advanced/\n\n When not implemented by a strategy, returns None\n\n :param trade: trade object.\n :param current_time: datetime object, containing the current datetime\n :param current_rate: Current entry rate (same as current_entry_profit)\n :param current_profit: Current profit (as ratio), calculated based on current_rate \n (same as current_entry_profit).\n :param min_stake: Minimal stake size allowed by exchange (for both entries and exits)\n :param max_stake: Maximum stake allowed (either through balance, or by exchange limits).\n :param current_entry_rate: Current rate using entry pricing.\n :param current_exit_rate: Current rate using exit pricing.\n :param current_entry_profit: Current profit using entry pricing.\n :param current_exit_profit: Current profit using exit pricing.\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n :return float: Stake amount to adjust your trade,\n Positive values to increase position, Negative values to decrease position.\n Return None for no action.\n Optionally, return a tuple with a 2nd element with an order reason\n \"\"\"\n if trade.has_open_orders:\n # Only act if no orders are open\n return\n\n if current_profit > 0.05 and trade.nr_of_successful_exits == 0:\n # Take half of the profit at +5%\n return -(trade.stake_amount / 2), \"half_profit_5%\"\n\n if current_profit > -0.05:\n return None\n\n # Obtain pair dataframe (just to show how to access it)\n dataframe, _ = self.dp.get_analyzed_dataframe(trade.pair, self.timeframe)\n # Only buy when not actively falling price.\n last_candle = dataframe.iloc[-1].squeeze()\n previous_candle = dataframe.iloc[-2].squeeze()\n if last_candle[\"close\"] < previous_candle[\"close\"]:\n return None\n\n filled_entries = trade.select_filled_orders(trade.entry_side)\n count_of_entries = trade.nr_of_successful_entries\n # Allow up to 3 additional increasingly larger buys (4 in total)\n # Initial buy is 1x\n # If that falls to -5% profit, we buy 1.25x more, average profit should increase to roughly -2.2%\n # If that falls down to -5% again, we buy 1.5x more\n # If that falls once again down to -5%, we buy 1.75x more\n # Total stake for this trade would be 1 + 1.25 + 1.5 + 1.75 = 5.5x of the initial allowed stake.\n # That is why max_dca_multiplier is 5.5\n # Hope you have a deep wallet!\n try:\n # This returns first order stake size\n stake_amount = filled_entries[0].stake_amount_filled\n # This then calculates current safety order size\n stake_amount = stake_amount * (1 + (count_of_entries * 0.25))\n return stake_amount, \"1/3rd_increase\"\n except Exception as exception:\n return None\n\n return None\nThis example assumes 0 fees for simplicity, and a long position on an imaginary coin.
The total profit for this trade was 950$ on a 3350$ investment (100@8$ + 100@9$ + 150@11$). As such - the final relative profit is 28.35% (950 / 3350).
The adjust_order_price() callback may be used by strategy developer to refresh/replace limit orders upon arrival of new candles. This callback is called once every iteration unless the order has been (re)placed within the current candle - limiting the maximum (re)placement of each order to once per candle. This also means that the first call will be at the start of the next candle after the initial order was placed.
Be aware that custom_entry_price()/custom_exit_price() is still the one dictating initial limit order price target at the time of the signal.
Orders can be cancelled out of this callback by returning None.
Returning current_order_rate will keep the order on the exchange \"as is\". Returning any other price will cancel the existing order, and replace it with a new order.
If the cancellation of the original order fails, then the order will not be replaced - though the order will most likely have been canceled on exchange. Having this happen on initial entries will result in the deletion of the order, while on position adjustment orders, it'll result in the trade size remaining as is. If the order has been partially filled, the order will not be replaced. You can however use adjust_trade_position() to adjust the trade size to the expected position size, should this be necessary / desired.
Regular timeout
Entry unfilledtimeout mechanism (as well as check_entry_timeout()/check_exit_timeout()) takes precedence over this callback. Orders that are cancelled via the above methods will not have this callback called. Be sure to update timeout values to match your expectations.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n def adjust_order_price(\n self,\n trade: Trade,\n order: Order | None,\n pair: str,\n current_time: datetime,\n proposed_rate: float,\n current_order_rate: float,\n entry_tag: str | None,\n side: str,\n is_entry: bool,\n **kwargs,\n ) -> float | None:\n \"\"\"\n Exit and entry order price re-adjustment logic, returning the user desired limit price.\n This only executes when a order was already placed, still open (unfilled fully or partially)\n and not timed out on subsequent candles after entry trigger.\n\n For full documentation please go to https://www.freqtrade.io/en/latest/strategy-callbacks/\n\n When not implemented by a strategy, returns current_order_rate as default.\n If current_order_rate is returned then the existing order is maintained.\n If None is returned then order gets canceled but not replaced by a new one.\n\n :param pair: Pair that's currently analyzed\n :param trade: Trade object.\n :param order: Order object\n :param current_time: datetime object, containing the current datetime\n :param proposed_rate: Rate, calculated based on pricing settings in entry_pricing.\n :param current_order_rate: Rate of the existing order in place.\n :param entry_tag: Optional entry_tag (buy_tag) if provided with the buy signal.\n :param side: 'long' or 'short' - indicating the direction of the proposed trade\n :param is_entry: True if the order is an entry order, False if it's an exit order.\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n :return float or None: New entry price value if provided\n \"\"\"\n\n # Limit entry orders to use and follow SMA200 as price target for the first 10 minutes since entry trigger for BTC/USDT pair.\n if (\n is_entry\n and pair == \"BTC/USDT\" \n and entry_tag == \"long_sma200\" \n and side == \"long\" \n and (current_time - timedelta(minutes=10)) <= trade.open_date_utc\n ):\n # just cancel the order if it has been filled more than half of the amount\n if order.filled > order.remaining:\n return None\n else:\n dataframe, _ = self.dp.get_analyzed_dataframe(pair=pair, timeframe=self.timeframe)\n current_candle = dataframe.iloc[-1].squeeze()\n # desired price\n return current_candle[\"sma_200\"]\n # default: maintain existing order\n return current_order_rate\nIncompatibility with adjust_*_price()
If you have both adjust_order_price() and adjust_entry_price()/adjust_exit_price() implemented, only adjust_order_price() will be used. If you need to adjust entry/exit prices, you can either implement the logic in adjust_order_price(), or use the split adjust_entry_price() / adjust_exit_price() callbacks, but not both. Mixing these is not supported and will raise an error during bot startup.
The adjust_entry_price() callback may be used by strategy developer to refresh/replace entry limit orders upon arrival. It's a sub-set of adjust_order_price() and is called only for entry orders. All remaining behavior is identical to adjust_order_price().
The trade open-date (trade.open_date_utc) will remain at the time of the very first order placed. Please make sure to be aware of this - and eventually adjust your logic in other callbacks to account for this, and use the date of the first filled order instead.
The adjust_exit_price() callback may be used by strategy developer to refresh/replace exit limit orders upon arrival. It's a sub-set of adjust_order_price() and is called only for exit orders. All remaining behavior is identical to adjust_order_price().
When trading in markets that allow leverage, this method must return the desired Leverage (Defaults to 1 -> No leverage).
Assuming a capital of 500USDT, a trade with leverage=3 would result in a position with 500 x 3 = 1500 USDT.
Values that are above max_leverage will be adjusted to max_leverage. For markets / exchanges that don't support leverage, this method is ignored.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n def leverage(self, pair: str, current_time: datetime, current_rate: float,\n proposed_leverage: float, max_leverage: float, entry_tag: str | None, side: str,\n **kwargs) -> float:\n \"\"\"\n Customize leverage for each new trade. This method is only called in futures mode.\n\n :param pair: Pair that's currently analyzed\n :param current_time: datetime object, containing the current datetime\n :param current_rate: Rate, calculated based on pricing settings in exit_pricing.\n :param proposed_leverage: A leverage proposed by the bot.\n :param max_leverage: Max leverage allowed on this pair\n :param entry_tag: Optional entry_tag (buy_tag) if provided with the buy signal.\n :param side: \"long\" or \"short\" - indicating the direction of the proposed trade\n :return: A leverage amount, which is between 1.0 and max_leverage.\n \"\"\"\n return 1.0\nAll profit calculations include leverage. Stoploss / ROI also include leverage in their calculation. Defining a stoploss of 10% at 10x leverage would trigger the stoploss with a 1% move to the downside.
"},{"location":"strategy-callbacks/#order-filled-callback","title":"Order filled Callback","text":"The order_filled() callback may be used to perform specific actions based on the current trade state after an order is filled. It will be called independent of the order type (entry, exit, stoploss or position adjustment).
Assuming that your strategy needs to store the high value of the candle at trade entry, this is possible with this callback as the following example show.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n def order_filled(self, pair: str, trade: Trade, order: Order, current_time: datetime, **kwargs) -> None:\n \"\"\"\n Called right after an order fills. \n Will be called for all order types (entry, exit, stoploss, position adjustment).\n :param pair: Pair for trade\n :param trade: trade object.\n :param order: Order object.\n :param current_time: datetime object, containing the current datetime\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n \"\"\"\n # Obtain pair dataframe (just to show how to access it)\n dataframe, _ = self.dp.get_analyzed_dataframe(trade.pair, self.timeframe)\n last_candle = dataframe.iloc[-1].squeeze()\n\n if (trade.nr_of_successful_entries == 1) and (order.ft_order_side == trade.entry_side):\n trade.set_custom_data(key=\"entry_candle_high\", value=last_candle[\"high\"])\n\n return None\nLearn more about storing data
You can learn more about storing data on the Storing custom trade data section. Please keep in mind that this is considered advanced usage, and should be used with care.
"},{"location":"strategy-callbacks/#plot-annotations-callback","title":"Plot annotations callback","text":"The plot annotations callback is called whenever freqUI requests data to display a chart. This callback has no meaning in the trade cycle context and is only used for charting purposes.
The strategy can then return a list of AnnotationType objects to be displayed on the chart. Depending on the content returned - the chart can display horizontal areas, vertical areas, or boxes.
The full object looks like this:
{\n \"type\": \"area\", // Type of the annotation, currently only \"area\" is supported\n \"start\": \"2024-01-01 15:00:00\", // Start date of the area\n \"end\": \"2024-01-01 16:00:00\", // End date of the area\n \"y_start\": 94000.2, // Price / y axis value\n \"y_end\": 98000, // Price / y axis value\n \"color\": \"\",\n \"z_level\": 5, // z-level, higher values are drawn on top of lower values. Positions relative to the Chart elements need to be set in freqUI.\n \"label\": \"some label\"\n}\nThe below example will mark the chart with areas for the hours 8 and 15, with a grey color, highlighting the market open and close hours. This is obviously a very basic example.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n def plot_annotations(\n self, pair: str, start_date: datetime, end_date: datetime, dataframe: DataFrame, **kwargs\n ) -> list[AnnotationType]:\n \"\"\"\n Retrieve area annotations for a chart.\n Must be returned as array, with type, label, color, start, end, y_start, y_end.\n All settings except for type are optional - though it usually makes sense to include either\n \"start and end\" or \"y_start and y_end\" for either horizontal or vertical plots\n (or all 4 for boxes).\n :param pair: Pair that's currently analyzed\n :param start_date: Start date of the chart data being requested\n :param end_date: End date of the chart data being requested\n :param dataframe: DataFrame with the analyzed data for the chart\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n :return: List of AnnotationType objects\n \"\"\"\n annotations = []\n while start_dt < end_date:\n start_dt += timedelta(hours=1)\n if start_dt.hour in (8, 15):\n annotations.append(\n {\n \"type\": \"area\",\n \"label\": \"Trade open and close hours\",\n \"start\": start_dt,\n \"end\": start_dt + timedelta(hours=1),\n # Omitting y_start and y_end will result in a vertical area spanning the whole height of the main Chart\n \"color\": \"rgba(133, 133, 133, 0.4)\",\n }\n )\n\n return annotations\nEntries will be validated, and won't be passed to the UI if they don't correspond to the expected schema and will log an error if they don't.
Many annotations
Using too many annotations can cause the UI to hang, especially when plotting large amounts of historic data. Use the annotation feature with care.
"},{"location":"strategy-callbacks/#plot-annotations-example","title":"Plot annotations example","text":"Code used for the plot aboveThis is an example code and should be treated as such.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n def plot_annotations(\n self, pair: str, start_date: datetime, end_date: datetime, dataframe: DataFrame, **kwargs\n ) -> list[AnnotationType]:\n annotations = []\n while start_dt < end_date:\n start_dt += timedelta(hours=1)\n if (start_dt.hour % 4) == 0:\n mark_areas.append(\n {\n \"type\": \"area\",\n \"label\": \"4h\",\n \"start\": start_dt,\n \"end\": start_dt + timedelta(hours=1),\n \"color\": \"rgba(133, 133, 133, 0.4)\",\n }\n )\n elif (start_dt.hour % 2) == 0:\n price = dataframe.loc[dataframe[\"date\"] == start_dt, [\"close\"]].mean()\n mark_areas.append(\n {\n \"type\": \"area\",\n \"label\": \"2h\",\n \"start\": start_dt,\n \"end\": start_dt + timedelta(hours=1),\n \"y_end\": price * 1.01,\n \"y_start\": price * 0.99,\n \"color\": \"rgba(0, 255, 0, 0.4)\",\n \"z_level\": 5,\n }\n )\n\n return annotations\nThis page explains how to customize your strategies, add new indicators and set up trading rules.
If you haven't already, please familiarize yourself with:
The bot includes a default strategy file.
Also, several other strategies are available in the strategy repository.
You will however most likely have your own idea for a strategy.
This document intends to help you convert your ideas into a working strategy.
"},{"location":"strategy-customization/#generating-a-strategy-template","title":"Generating a strategy template","text":"To get started, you can use the command:
freqtrade new-strategy --strategy AwesomeStrategy\nThis will create a new strategy called AwesomeStrategy from a template, which will be located using the filename user_data/strategies/AwesomeStrategy.py.
Note
There is a difference between the name of the strategy and the filename. In most commands, Freqtrade uses the name of the strategy, not the filename.
Note
The new-strategy command generates starting examples which will not be profitable out of the box.
freqtrade new-strategy has an additional parameter, --template, which controls the amount of pre-build information you get in the created strategy. Use --template minimal to get an empty strategy without any indicator examples, or --template advanced to get a template with more complicated features defined.
A strategy file contains all the information needed to build the strategy logic:
The bot includes a sample strategy called SampleStrategy that you can use as a basis: user_data/strategies/sample_strategy.py. You can test it with the parameter: --strategy SampleStrategy. Remember that you use the strategy class name, not the filename.
Additionally, there is an attribute called INTERFACE_VERSION, which defines the version of the strategy interface the bot should use. The current version is 3 - which is also the default when it's not set explicitly in the strategy.
You may see older strategies set to interface version 2, and these will need to be updated to v3 terminology as future versions will require this to be set.
Starting the bot in dry or live mode is accomplished using the trade command:
freqtrade trade --strategy AwesomeStrategy\nFreqtrade strategies can be processed by the Freqtrade bot in 5 main modes:
Check the configuration documentation about how to set the bot to dry or live mode.
Always use dry mode when testing as this gives you an idea of how your strategy will work in reality without risking capital.
"},{"location":"strategy-customization/#diving-in-deeper","title":"Diving in deeper","text":"For the following section we will use the user_data/strategies/sample_strategy.py file as reference.
Strategies and Backtesting
To avoid problems and unexpected differences between backtesting and dry/live modes, please be aware that during backtesting the full time range is passed to the populate_*() methods at once. It is therefore best to use vectorized operations (across the whole dataframe, not loops) and avoid index referencing (df.iloc[-1]), but instead use df.shift() to get to the previous candle.
Warning: Using future data
Since backtesting passes the full time range to the populate_*() methods, the strategy author needs to take care to avoid having the strategy utilize data from the future. Some common patterns for this are listed in the Common Mistakes section of this document.
Freqtrade includes two helpful commands to help assess common lookahead (using future data) and recursive bias (variance in indicator values) issues. Before running a strategy in dry or live more, you should always use these commands first. Please check the relevant documentation for lookahead and recursive analysis.
"},{"location":"strategy-customization/#dataframe","title":"Dataframe","text":"Freqtrade uses pandas to store/provide the candlestick (OHLCV) data. Pandas is a great library developed for processing large amounts of data in tabular format.
Each row in a dataframe corresponds to one candle on a chart, with the latest complete candle always being the last in the dataframe (sorted by date).
If we were to look at the first few rows of the main dataframe using the pandas head() function, we would see:
> dataframe.head()\n date open high low close volume\n0 2021-11-09 23:25:00+00:00 67279.67 67321.84 67255.01 67300.97 44.62253\n1 2021-11-09 23:30:00+00:00 67300.97 67301.34 67183.03 67187.01 61.38076\n2 2021-11-09 23:35:00+00:00 67187.02 67187.02 67031.93 67123.81 113.42728\n3 2021-11-09 23:40:00+00:00 67123.80 67222.40 67080.33 67160.48 78.96008\n4 2021-11-09 23:45:00+00:00 67160.48 67160.48 66901.26 66943.37 111.39292\nA dataframe is a table where columns are not single values, but a series of data values. As such, simple python comparisons like the following will not work:
if dataframe['rsi'] > 30:\n dataframe['enter_long'] = 1\nThe above section will fail with The truth value of a Series is ambiguous [...].
This must instead be written in a pandas-compatible way, so the operation is performed across the whole dataframe, i.e. vectorisation.
dataframe.loc[\n (dataframe['rsi'] > 30)\n , 'enter_long'] = 1\nWith this section, you have a new column in your dataframe, which has 1 assigned whenever RSI is above 30.
Freqtrade uses this new column as an entry signal, where it is assumed that a trade will subsequently open on the next open candle.
Pandas provides fast ways to calculate metrics, i.e. \"vectorisation\". To benefit from this speed, it is advised to not use loops, but use vectorized methods instead.
Vectorized operations perform calculations across the whole range of data and are therefore, compared to looping through each row, a lot faster when calculating indicators.
Signals vs TradesTrade order assumptions
In backtesting, signals are generated on candle close. Trades are then initiated immeditely on next candle open.
In dry and live, this may be delayed due to all pair dataframes needing to be analysed first, then trade processing for each of those pairs happens. This means that in dry/live you need to be mindful of having as low a computation delay as possible, usually by running a low number of pairs and having a CPU with a good clock speed.
"},{"location":"strategy-customization/#why-cant-i-see-real-time-candle-data","title":"Why can't I see \"real time\" candle data?","text":"Freqtrade does not store incomplete/unfinished candles in the dataframe.
The use of incomplete data for making strategy decisions is called \"repainting\" and you might see other platforms allow this.
Freqtrade does not. Only complete/finished candle data is available in the dataframe.
"},{"location":"strategy-customization/#customize-indicators","title":"Customize Indicators","text":"Entry and exit signals need indicators. You can add more indicators by extending the list contained in the method populate_indicators() from your strategy file.
You should only add the indicators used in either populate_entry_trend(), populate_exit_trend(), or to populate another indicator, otherwise performance may suffer.
It's important to always return the dataframe from these three functions without removing/modifying the columns \"open\", \"high\", \"low\", \"close\", \"volume\", otherwise these fields would contain something unexpected.
Sample:
def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Adds several different TA indicators to the given DataFrame\n\n Performance Note: For the best performance be frugal on the number of indicators\n you are using. Let uncomment only the indicator you are using in your strategies\n or your hyperopt configuration, otherwise you will waste your memory and CPU usage.\n :param dataframe: Dataframe with data from the exchange\n :param metadata: Additional information, like the currently traded pair\n :return: a Dataframe with all mandatory indicators for the strategies\n \"\"\"\n dataframe['sar'] = ta.SAR(dataframe)\n dataframe['adx'] = ta.ADX(dataframe)\n stoch = ta.STOCHF(dataframe)\n dataframe['fastd'] = stoch['fastd']\n dataframe['fastk'] = stoch['fastk']\n dataframe['bb_lower'] = ta.BBANDS(dataframe, nbdevup=2, nbdevdn=2)['lowerband']\n dataframe['sma'] = ta.SMA(dataframe, timeperiod=40)\n dataframe['tema'] = ta.TEMA(dataframe, timeperiod=9)\n dataframe['mfi'] = ta.MFI(dataframe)\n dataframe['rsi'] = ta.RSI(dataframe)\n dataframe['ema5'] = ta.EMA(dataframe, timeperiod=5)\n dataframe['ema10'] = ta.EMA(dataframe, timeperiod=10)\n dataframe['ema50'] = ta.EMA(dataframe, timeperiod=50)\n dataframe['ema100'] = ta.EMA(dataframe, timeperiod=100)\n dataframe['ao'] = awesome_oscillator(dataframe)\n macd = ta.MACD(dataframe)\n dataframe['macd'] = macd['macd']\n dataframe['macdsignal'] = macd['macdsignal']\n dataframe['macdhist'] = macd['macdhist']\n hilbert = ta.HT_SINE(dataframe)\n dataframe['htsine'] = hilbert['sine']\n dataframe['htleadsine'] = hilbert['leadsine']\n dataframe['plus_dm'] = ta.PLUS_DM(dataframe)\n dataframe['plus_di'] = ta.PLUS_DI(dataframe)\n dataframe['minus_dm'] = ta.MINUS_DM(dataframe)\n dataframe['minus_di'] = ta.MINUS_DI(dataframe)\n\n # remember to always return the dataframe\n return dataframe\nWant more indicator examples?
Look into the user_data/strategies/sample_strategy.py. Then uncomment indicators you need.
"},{"location":"strategy-customization/#indicator-libraries","title":"Indicator libraries","text":"Out of the box, freqtrade installs the following technical libraries:
Additional technical libraries can be installed as necessary, or custom indicators may be written / invented by the strategy author.
"},{"location":"strategy-customization/#strategy-startup-period","title":"Strategy startup period","text":"Some indicators have an unstable startup period in which there isn't enough candle data to calculate any values (NaN), or the calculation is incorrect. This can lead to inconsistencies, since Freqtrade does not know how long this unstable period is and uses whatever indicator values are in the dataframe.
To account for this, the strategy can be assigned the startup_candle_count attribute.
This should be set to the maximum number of candles that the strategy requires to calculate stable indicators. In the case where a user includes higher timeframes with informative pairs, the startup_candle_count does not necessarily change. The value is the maximum period (in candles) that any of the informatives timeframes need to compute stable indicators.
You can use recursive-analysis to check and find the correct startup_candle_count to be used. When recursive analysis shows a variance of 0%, then you can be sure that you have enough startup candle data.
In this example strategy, this should be set to 400 (startup_candle_count = 400), since the minimum needed history for ema100 calculation to make sure the value is correct is 400 candles.
dataframe['ema100'] = ta.EMA(dataframe, timeperiod=100)\nBy letting the bot know how much history is needed, backtest trades can start at the specified timerange during backtesting and hyperopt.
Using x calls to get OHLCV
If you receive a warning like WARNING - Using 3 calls to get OHLCV. This can result in slower operations for the bot. Please check if you really need 1500 candles for your strategy - you should consider if you really need this much historic data for your signals. Having this will cause Freqtrade to make multiple calls for the same pair, which will obviously be slower than one network request. As a consequence, Freqtrade will take longer to refresh candles - and should therefore be avoided if possible. This is capped to 5 total calls to avoid overloading the exchange, or make freqtrade too slow.
Warning
startup_candle_count should be below ohlcv_candle_limit * 5 (which is 500 * 5 for most exchanges) - since only this amount of candles will be available during Dry-Run/Live Trade operations.
Let's try to backtest 1 month (January 2019) of 5m candles using an example strategy with EMA100, as above.
freqtrade backtesting --timerange 20190101-20190201 --timeframe 5m\nAssuming startup_candle_count is set to 400, backtesting knows it needs 400 candles to generate valid entry signals. It will load data from 20190101 - (400 * 5m) - which is ~2018-12-30 11:40:00.
If this data is available, indicators will be calculated with this extended timerange. The unstable startup period (up to 2019-01-01 00:00:00) will then be removed before backtesting is carried out.
Unavailable startup candle data
If data for the startup period is not available, then the timerange will be adjusted to account for this startup period. In our example, backtesting would then start from 2019-01-02 09:20:00.
"},{"location":"strategy-customization/#entry-signal-rules","title":"Entry signal rules","text":"Edit the method populate_entry_trend() in your strategy file to update your entry strategy.
It's important to always return the dataframe without removing/modifying the columns \"open\", \"high\", \"low\", \"close\", \"volume\", otherwise these fields would contain something unexpected. The strategy may then produce invalid values, or cease to work entirely.
This method will also define a new column, \"enter_long\" (\"enter_short\" for shorts), which needs to contain 1 for entries, and 0 for \"no action\". enter_long is a mandatory column that must be set even if the strategy is shorting only.
You can name your entry signals by using the \"enter_tag\" column, which can help debug and assess your strategy later.
Sample from user_data/strategies/sample_strategy.py:
def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Based on TA indicators, populates the buy signal for the given dataframe\n :param dataframe: DataFrame populated with indicators\n :param metadata: Additional information, like the currently traded pair\n :return: DataFrame with buy column\n \"\"\"\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 30)) & # Signal: RSI crosses above 30\n (dataframe['tema'] <= dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] > dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['enter_long', 'enter_tag']] = (1, 'rsi_cross')\n\n return dataframe\nShort entries can be created by setting enter_short (corresponds to enter_long for long trades). The enter_tag column remains identical. Shorting needs to be supported by your exchange and market configuration! Also, make sure you set can_short appropriately on your strategy if you intend to short.
# allow both long and short trades\ncan_short = True\n\ndef populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 30)) & # Signal: RSI crosses above 30\n (dataframe['tema'] <= dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] > dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['enter_long', 'enter_tag']] = (1, 'rsi_cross')\n\n dataframe.loc[\n (\n (qtpylib.crossed_below(dataframe['rsi'], 70)) & # Signal: RSI crosses below 70\n (dataframe['tema'] > dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] < dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['enter_short', 'enter_tag']] = (1, 'rsi_cross')\n\n return dataframe\nNote
Buying requires sellers to buy from. Therefore volume needs to be > 0 (dataframe['volume'] > 0) to make sure that the bot does not buy/sell in no-activity periods.
Edit the method populate_exit_trend() into your strategy file to update your exit strategy.
The exit-signal can be suppressed by setting use_exit_signal to false in the configuration or strategy.
use_exit_signal will not influence signal collision rules - which will still apply and can prevent entries.
It's important to always return the dataframe without removing/modifying the columns \"open\", \"high\", \"low\", \"close\", \"volume\", otherwise these fields would contain something unexpected. The strategy may then produce invalid values, or cease to work entirely.
This method will also define a new column, \"exit_long\" (\"exit_short\" for shorts), which needs to contain 1 for exits, and 0 for \"no action\".
You can name your exit signals by using the \"exit_tag\" column, which can help debug and assess your strategy later.
Sample from user_data/strategies/sample_strategy.py:
def populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Based on TA indicators, populates the exit signal for the given dataframe\n :param dataframe: DataFrame populated with indicators\n :param metadata: Additional information, like the currently traded pair\n :return: DataFrame with buy column\n \"\"\"\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 70)) & # Signal: RSI crosses above 70\n (dataframe['tema'] > dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] < dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['exit_long', 'exit_tag']] = (1, 'rsi_too_high')\n return dataframe\nShort exits can be created by setting exit_short (corresponds to exit_long). The exit_tag column remains identical. Shorting needs to be supported by your exchange and market configuration! Also, make sure you set can_short appropriately on your strategy if you intend to short.
# allow both long and short trades\ncan_short = True\n\ndef populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 70)) & # Signal: RSI crosses above 70\n (dataframe['tema'] > dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] < dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['exit_long', 'exit_tag']] = (1, 'rsi_too_high')\n dataframe.loc[\n (\n (qtpylib.crossed_below(dataframe['rsi'], 30)) & # Signal: RSI crosses below 30\n (dataframe['tema'] < dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] > dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['exit_short', 'exit_tag']] = (1, 'rsi_too_low')\n return dataframe\nThe minimal_roi strategy variable defines the minimal Return On Investment (ROI) a trade should reach before exiting, independent from the exit signal.
It is of the following format, i.e. a python dict, with the dict key (left side of the colon) being the minutes passed since the trade opened, and the value (right side of the colon) being the percentage.
minimal_roi = {\n \"40\": 0.0,\n \"30\": 0.01,\n \"20\": 0.02,\n \"0\": 0.04\n}\nThe above configuration would therefore mean:
The calculation does include fees.
"},{"location":"strategy-customization/#disabling-minimal-roi","title":"Disabling minimal ROI","text":"To disable ROI completely, set it to an empty dictionary:
minimal_roi = {}\nTo use times based on candle duration (timeframe), the following snippet can be handy.
This will allow you to change the timeframe for the strategy, but the minimal ROI times will still be set as candles, e.g. after 3 candles.
from freqtrade.exchange import timeframe_to_minutes\n\nclass AwesomeStrategy(IStrategy):\n\n timeframe = \"1d\"\n timeframe_mins = timeframe_to_minutes(timeframe)\n minimal_roi = {\n \"0\": 0.05, # 5% for the first 3 candles\n str(timeframe_mins * 3): 0.02, # 2% after 3 candles\n str(timeframe_mins * 6): 0.01, # 1% After 6 candles\n }\nminimal_roi will take the trade.open_date as reference, which is the time the trade was initialized, i.e. when the first order for this trade was placed. This will also hold true for limit orders that don't fill immediately (usually in combination with \"off-spot\" prices through custom_entry_price()), as well as for cases where the initial order price is replaced through adjust_entry_price(). The time used will still be from the initial trade.open_date (when the initial order was first placed), not from the newly placed or adjusted order date.
Setting a stoploss is highly recommended to protect your capital from strong moves against you.
Sample of setting a 10% stoploss:
stoploss = -0.10\nFor the full documentation on stoploss features, look at the dedicated stoploss page.
"},{"location":"strategy-customization/#timeframe","title":"Timeframe","text":"This is the periodicity of candles the bot should use in the strategy.
Common values are \"1m\", \"5m\", \"15m\", \"1h\", however all values supported by your exchange should work.
Please note that the same entry/exit signals may work well with one timeframe, but not with others.
This setting is accessible within the strategy methods as the self.timeframe attribute.
To use short signals in futures markets, you will have to set can_short = True.
Strategies which enable this will fail to load on spot markets.
If you have 1 values in the enter_short column to raise short signals, setting can_short = False (which is the default) will mean that these short signals are ignored, even if you have specified futures markets in your configuration.
The metadata dict (available for populate_entry_trend, populate_exit_trend, populate_indicators) contains additional information. Currently this is pair, which can be accessed using metadata['pair'], and will return a pair in the format XRP/BTC (or XRP/BTC:BTC for futures markets).
The metadata dict should not be modified and does not persist information across multiple functions in your strategy.
Instead, please check the Storing information section.
"},{"location":"strategy-customization/#imports-necessary-for-a-strategy","title":"Imports necessary for a strategy","text":"When creating a strategy, you will need to import the necessary modules and classes. The following imports are required for a strategy:
By default, we recommend the following imports as a base line for your strategy: This will cover all imports necessary for freqtrade functions to work. Obviously you can add more imports as needed for your strategy.
# flake8: noqa: F401\n# isort: skip_file\n# --- Do not remove these imports ---\nimport numpy as np\nimport pandas as pd\nfrom datetime import datetime, timedelta, timezone\nfrom pandas import DataFrame\nfrom typing import Dict, Optional, Union, Tuple\n\nfrom freqtrade.strategy import (\n IStrategy,\n Trade, \n Order,\n PairLocks,\n informative, # @informative decorator\n # Hyperopt Parameters\n BooleanParameter,\n CategoricalParameter,\n DecimalParameter,\n IntParameter,\n RealParameter,\n # timeframe helpers\n timeframe_to_minutes,\n timeframe_to_next_date,\n timeframe_to_prev_date,\n # Strategy helper functions\n merge_informative_pair,\n stoploss_from_absolute,\n stoploss_from_open,\n)\n\n# --------------------------------\n# Add your lib to import here\nimport talib.abstract as ta\nfrom technical import qtpylib\nBy default, freqtrade will attempt to load strategies from all .py files within the userdir (default user_data/strategies).
Assuming your strategy is called AwesomeStrategy, stored in the file user_data/strategies/AwesomeStrategy.py, then you can start freqtrade in dry (or live, depending on your configuration) mode with:
freqtrade trade --strategy AwesomeStrategy\nNote that we're using the class name, not the file name.
You can use freqtrade list-strategies to see a list of all strategies Freqtrade is able to load (all strategies in the correct folder). It will also include a \"status\" field, highlighting potential problems.
You can use a different directory by using --strategy-path user_data/otherPath. This parameter is available to all commands that require a strategy.
Data for additional, informative pairs (reference pairs) can be beneficial for some strategies to see data on a wider timeframe.
OHLCV data for these pairs will be downloaded as part of the regular whitelist refresh process and is available via DataProvider just as other pairs (see below).
These pairs will not be traded unless they are also specified in the pair whitelist, or have been selected by Dynamic Whitelisting, e.g. VolumePairlist.
The pairs need to be specified as tuples in the format (\"pair\", \"timeframe\"), with pair as the first and timeframe as the second argument.
Sample:
def informative_pairs(self):\n return [(\"ETH/USDT\", \"5m\"),\n (\"BTC/TUSD\", \"15m\"),\n ]\nA full sample can be found in the DataProvider section.
Warning
As these pairs will be refreshed as part of the regular whitelist refresh, it's best to keep this list short. All timeframes and all pairs can be specified as long as they are available (and active) on the used exchange. It is however better to use resampling to longer timeframes whenever possible to avoid hammering the exchange with too many requests and risk being blocked.
Alternative candle typesInformative_pairs can also provide a 3rd tuple element defining the candle type explicitly. Availability of alternative candle-types will depend on the trading-mode and the exchange. In general, spot pairs cannot be used in futures markets, and futures candles can't be used as informative pairs for spot bots. Details about this may vary, if they do, this can be found in the exchange documentation.
def informative_pairs(self):\n return [\n (\"ETH/USDT\", \"5m\", \"\"), # Uses default candletype, depends on trading_mode (recommended)\n (\"ETH/USDT\", \"5m\", \"spot\"), # Forces usage of spot candles (only valid for bots running on spot markets).\n (\"BTC/TUSD\", \"15m\", \"futures\"), # Uses futures candles (only bots with `trading_mode=futures`)\n (\"BTC/TUSD\", \"15m\", \"mark\"), # Uses mark candles (only bots with `trading_mode=futures`)\n ]\n@informative())","text":"To easily define informative pairs, use the @informative decorator. All decorated populate_indicators_* methods run in isolation, and do not have access to data from other informative pairs. However, all informative dataframes for each pair are merged and passed to main populate_indicators() method.
Note
Do not use the @informative decorator if you need to use data from one informative pair when generating another informative pair. Instead, define informative pairs manually as described in the DataProvider section.
When hyperopting, use of the hyperoptable parameter .value attribute is not supported. Please use the .range attribute. See optimizing an indicator parameter for more information.
def informative(\n timeframe: str,\n asset: str = \"\",\n fmt: str | Callable[[Any], str] | None = None,\n *,\n candle_type: CandleType | str | None = None,\n ffill: bool = True,\n) -> Callable[[PopulateIndicators], PopulateIndicators]:\n \"\"\"\n A decorator for populate_indicators_Nn(self, dataframe, metadata), allowing these functions to\n define informative indicators.\n\n Example usage:\n\n @informative('1h')\n def populate_indicators_1h(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)\n return dataframe\n\n :param timeframe: Informative timeframe. Must always be equal or higher than strategy timeframe.\n :param asset: Informative asset, for example BTC, BTC/USDT, ETH/BTC. Do not specify to use\n current pair. Also supports limited pair format strings (see below)\n :param fmt: Column format (str) or column formatter (callable(name, asset, timeframe)). When not\n specified, defaults to:\n * {base}_{quote}_{column}_{timeframe} if asset is specified.\n * {column}_{timeframe} if asset is not specified.\n Pair format supports these format variables:\n * {base} - base currency in lower case, for example 'eth'.\n * {BASE} - same as {base}, except in upper case.\n * {quote} - quote currency in lower case, for example 'usdt'.\n * {QUOTE} - same as {quote}, except in upper case.\n Format string additionally supports this variables.\n * {asset} - full name of the asset, for example 'BTC/USDT'.\n * {column} - name of dataframe column.\n * {timeframe} - timeframe of informative dataframe.\n :param ffill: ffill dataframe after merging informative pair.\n :param candle_type: '', mark, index, premiumIndex, or funding_rate\n \"\"\"\nMost of the time we do not need power and flexibility offered by merge_informative_pair(), therefore we can use a decorator to quickly define informative pairs.
from datetime import datetime\nfrom freqtrade.persistence import Trade\nfrom freqtrade.strategy import IStrategy, informative\n\nclass AwesomeStrategy(IStrategy):\n\n # This method is not required. \n # def informative_pairs(self): ...\n\n # Define informative upper timeframe for each pair. Decorators can be stacked on same \n # method. Available in populate_indicators as 'rsi_30m' and 'rsi_1h'.\n @informative('30m')\n @informative('1h')\n def populate_indicators_1h(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)\n return dataframe\n\n # Define BTC/STAKE informative pair. Available in populate_indicators and other methods as\n # 'btc_rsi_1h'. Current stake currency should be specified as {stake} format variable \n # instead of hard-coding actual stake currency. Available in populate_indicators and other \n # methods as 'btc_usdt_rsi_1h' (when stake currency is USDT).\n @informative('1h', 'BTC/{stake}')\n def populate_indicators_btc_1h(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)\n return dataframe\n\n # Define BTC/ETH informative pair. You must specify quote currency if it is different from\n # stake currency. Available in populate_indicators and other methods as 'eth_btc_rsi_1h'.\n @informative('1h', 'ETH/BTC')\n def populate_indicators_eth_btc_1h(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)\n return dataframe\n\n # Define BTC/STAKE informative pair. A custom formatter may be specified for formatting\n # column names. A callable `fmt(**kwargs) -> str` may be specified, to implement custom\n # formatting. Available in populate_indicators and other methods as 'rsi_upper_1h'.\n @informative('1h', 'BTC/{stake}', '{column}_{timeframe}')\n def populate_indicators_btc_1h_2(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe['rsi_upper'] = ta.RSI(dataframe, timeperiod=14)\n return dataframe\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # Strategy timeframe indicators for current pair.\n dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)\n # Informative pairs are available in this method.\n dataframe['rsi_less'] = dataframe['rsi'] < dataframe['rsi_1h']\n return dataframe\nNote
Use string formatting when accessing informative dataframes of other pairs. This will allow easily changing stake currency in config without having to adjust strategy code.
def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n stake = self.config['stake_currency']\n dataframe.loc[\n (\n (dataframe[f'btc_{stake}_rsi_1h'] < 35)\n &\n (dataframe['volume'] > 0)\n ),\n ['enter_long', 'enter_tag']] = (1, 'buy_signal_rsi')\n\n return dataframe\nAlternatively column renaming may be used to remove stake currency from column names: @informative('1h', 'BTC/{stake}', fmt='{base}_{column}_{timeframe}').
Duplicate method names
Methods tagged with the @informative() decorator must always have unique names! Reusing the same name (for example when copy-pasting already defined informative methods) will overwrite previously defined methods and not produce any errors due to limitations of Python programming language. In such cases you will find that indicators created in methods higher up in the strategy file are not available in the dataframe. Carefully review method names and make sure they are unique!
This method helps you merge an informative pair to the regular main dataframe safely and consistently, without lookahead bias.
Options:
For a full sample, please refer to the complete data provider example below.
All columns of the informative dataframe will be available on the returning dataframe in a renamed fashion:
Column renaming
Assuming inf_tf = '1d' the resulting columns will be:
'date', 'open', 'high', 'low', 'close', 'rsi' # from the original dataframe\n'date_1d', 'open_1d', 'high_1d', 'low_1d', 'close_1d', 'rsi_1d' # from the informative dataframe\nAssuming inf_tf = '1h' the resulting columns will be:
'date', 'open', 'high', 'low', 'close', 'rsi' # from the original dataframe\n'date_1h', 'open_1h', 'high_1h', 'low_1h', 'close_1h', 'rsi_1h' # from the informative dataframe\nA custom implementation for this is possible, and can be done as follows:
# Shift date by 1 candle\n# This is necessary since the data is always the \"open date\"\n# and a 15m candle starting at 12:15 should not know the close of the 1h candle from 12:00 to 13:00\nminutes = timeframe_to_minutes(inf_tf)\n# Only do this if the timeframes are different:\ninformative['date_merge'] = informative[\"date\"] + pd.to_timedelta(minutes, 'm')\n\n# Rename columns to be unique\ninformative.columns = [f\"{col}_{inf_tf}\" for col in informative.columns]\n# Assuming inf_tf = '1d' - then the columns will now be:\n# date_1d, open_1d, high_1d, low_1d, close_1d, rsi_1d\n\n# Combine the 2 dataframes\n# all indicators on the informative sample MUST be calculated before this point\ndataframe = pd.merge(dataframe, informative, left_on='date', right_on=f'date_merge_{inf_tf}', how='left')\n# FFill to have the 1d value available in every row throughout the day.\n# Without this, comparisons would only work once per day.\ndataframe = dataframe.ffill()\nInformative timeframe < timeframe
Using informative timeframes smaller than the main dataframe timeframe is not recommended with this method, as it will not use any of the additional information this would provide. To use the more detailed information properly, more advanced methods should be applied (which are out of scope for this documentation).
"},{"location":"strategy-customization/#additional-data-dataprovider","title":"Additional data (DataProvider)","text":"The strategy provides access to the DataProvider. This allows you to get additional data to use in your strategy.
All methods return None in case of failure, i.e. failures do not raise an exception.
Please always check the mode of operation to select the correct method to get data (see below for examples).
Hyperopt Limitations
The DataProvider is available during hyperopt, however it can only be used in populate_indicators() within a strategy, not within a hyperopt class file. It is also not available in populate_entry_trend() and populate_exit_trend() methods.
available_pairs - Property with tuples listing cached pairs with their timeframe (pair, timeframe).current_whitelist() - Returns a current list of whitelisted pairs. Useful for accessing dynamic whitelists (i.e. VolumePairlist)get_pair_dataframe(pair, timeframe) - This is a universal method, which returns either historical data (for backtesting) or cached live data (for the Dry-Run and Live-Run modes).get_analyzed_dataframe(pair, timeframe) - Returns the analyzed dataframe (after calling populate_indicators(), populate_buy(), populate_sell()) and the time of the latest analysis.historic_ohlcv(pair, timeframe) - Returns historical data stored on disk.market(pair) - Returns market data for the pair: fees, limits, precisions, activity flag, etc. See ccxt documentation for more details on the Market data structure.ohlcv(pair, timeframe) - Currently cached candle (OHLCV) data for the pair, returns DataFrame or empty DataFrame.orderbook(pair, maximum) - Returns latest orderbook data for the pair, a dict with bids/asks with a total of maximum entries.ticker(pair) - Returns current ticker data for the pair. See ccxt documentation for more details on the Ticker data structure.check_delisting(pair) - Return Datetime of the pair delisting schedule if any, otherwise return Nonefunding_rate(pair) - Returns current funding rate data for the pair.runmode - Property containing the current runmode.for pair, timeframe in self.dp.available_pairs:\n print(f\"available {pair}, {timeframe}\")\nImagine you've developed a strategy that trades the 5m timeframe using signals generated from a 1d timeframe on the top 10 exchange pairs by volume.
The strategy logic might look something like this:
Scan through the top 10 pairs by volume using the VolumePairList every 5 minutes and use a 14 day RSI to enter and exit.
Due to the limited available data, it's very difficult to resample 5m candles into daily candles for use in a 14 day RSI. Most exchanges limit users to just 500-1000 candles which effectively gives us around 1.74 daily candles. We need 14 days at least!
Since we can't resample the data we will have to use an informative pair, and since the whitelist will be dynamic we don't know which pair(s) to use! We have a problem!
This is where calling self.dp.current_whitelist() comes in handy to retrieve only those pairs in the whitelist.
def informative_pairs(self):\n\n # get access to all pairs available in whitelist.\n pairs = self.dp.current_whitelist()\n # Assign timeframe to each pair so they can be downloaded and cached for strategy.\n informative_pairs = [(pair, '1d') for pair in pairs]\n return informative_pairs\nCurrent whitelist is not supported for plot-dataframe, as this command is usually used by providing an explicit pairlist and would therefore make the return values of this method misleading. It's also not supported for FreqUI visualization in webserver mode, as the configuration for webserver mode doesn't require a pairlist to be set.
# fetch live / historical candle (OHLCV) data for the first informative pair\ninf_pair, inf_timeframe = self.informative_pairs()[0]\ninformative = self.dp.get_pair_dataframe(pair=inf_pair,\n timeframe=inf_timeframe)\nWarning about backtesting
In backtesting, dp.get_pair_dataframe() behavior differs depending on where it's called. Within populate_*() methods, dp.get_pair_dataframe() returns the full timerange. Please make sure to not \"look into the future\" to avoid surprises when running in dry/live mode. Within callbacks, you'll get the full timerange up to the current (simulated) candle.
This method is used by freqtrade internally to determine the last signal. It can also be used in specific callbacks to get the signal that caused the action (see Advanced Strategy Documentation for more details on available callbacks).
# fetch current dataframe\ndataframe, last_updated = self.dp.get_analyzed_dataframe(pair=metadata['pair'],\n timeframe=self.timeframe)\nNo data available
Returns an empty dataframe if the requested pair was not cached. You can check for this with if dataframe.empty: and handle this case accordingly. This should not happen when using whitelisted pairs.
Retrieve the current order book for a pair.
if self.dp.runmode.value in ('live', 'dry_run'):\n ob = self.dp.orderbook(metadata['pair'], 1)\n dataframe['best_bid'] = ob['bids'][0][0]\n dataframe['best_ask'] = ob['asks'][0][0]\nThe orderbook structure is aligned with the order structure from ccxt, so the result will be formatted as follows:
{\n 'bids': [\n [ price, amount ], // [ float, float ]\n [ price, amount ],\n ...\n ],\n 'asks': [\n [ price, amount ],\n [ price, amount ],\n //...\n ],\n //...\n}\nTherefore, using ob['bids'][0][0] as demonstrated above will use the best bid price. ob['bids'][0][1] would look at the amount at this orderbook position.
Warning about backtesting
The order book is not part of the historic data which means backtesting and hyperopt will not work correctly if this method is used, as the method will return up-to-date values.
"},{"location":"strategy-customization/#tickerpair","title":"ticker(pair)","text":"if self.dp.runmode.value in ('live', 'dry_run'):\n ticker = self.dp.ticker(metadata['pair'])\n dataframe['last_price'] = ticker['last']\n dataframe['volume24h'] = ticker['quoteVolume']\n dataframe['vwap'] = ticker['vwap']\nWarning
Although the ticker data structure is a part of the ccxt Unified Interface, the values returned by this method can vary for different exchanges. For instance, many exchanges do not return vwap values, and some exchanges do not always fill in the last field (so it can be None), etc. So you need to carefully verify the ticker data returned from the exchange and add appropriate error handling / defaults.
Warning about backtesting
This method will always return up-to-date / real-time values. As such, usage during backtesting / hyperopt without runmode checks will lead to wrong results, e.g. your whole dataframe will contain the same single value in all rows.
"},{"location":"strategy-customization/#check_delistingpair","title":"check_delisting(pair)","text":"def custom_exit(self, pair: str, trade: Trade, current_time: datetime, current_rate: float, current_profit: float, **kwargs):\n if self.dp.runmode.value in ('live', 'dry_run'):\n delisting_dt = self.dp.check_delisting(pair)\n if delisting_dt is not None:\n return \"delist\"\nAvailabiity of delisting information
This method is only available for certain exchanges and will return None in cases this is not available or if the pair is not scheduled for delisting.
Warning about backtesting
This method will always return up-to-date / real-time values. As such, usage during backtesting / hyperopt without runmode checks will lead to wrong results, e.g. your whole dataframe will contain the same single value in all rows.
"},{"location":"strategy-customization/#funding_ratepair","title":"funding_rate(pair)","text":"Retrieves the current funding rate for the pair and only works for futures pairs in the format of base/quote:settle (e.g. ETH/USDT:USDT).
if self.dp.runmode.value in ('live', 'dry_run'):\n funding_rate = self.dp.funding_rate(metadata['pair'])\n dataframe['current_funding_rate'] = funding_rate['fundingRate']\n dataframe['next_funding_timestamp'] = funding_rate['fundingTimestamp']\n dataframe['next_funding_datetime'] = funding_rate['fundingDatetime']\nThe funding rate structure is aligned with the funding rate structure from ccxt, so the result will be formatted as follows:
{\n \"info\": {\n # ... \n },\n \"symbol\": \"BTC/USDT:USDT\",\n \"markPrice\": 110730.7,\n \"indexPrice\": 110782.52,\n \"interestRate\": 0.0001,\n \"estimatedSettlePrice\": 110822.67200153,\n \"timestamp\": 1757146321001,\n \"datetime\": \"2025-09-06T08:12:01.001Z\",\n \"fundingRate\": 5.609e-05,\n \"fundingTimestamp\": 1757174400000,\n \"fundingDatetime\": \"2025-09-06T16:00:00.000Z\",\n \"nextFundingRate\": None,\n \"nextFundingTimestamp\": None,\n \"nextFundingDatetime\": None,\n \"previousFundingRate\": None,\n \"previousFundingTimestamp\": None,\n \"previousFundingDatetime\": None,\n \"interval\": None,\n}\nTherefore, using funding_rate['fundingRate'] as demonstrated above will use the current funding rate. Actually available data will vary between exchanges, so this code may not work as expected across exchanges.
Warning about backtesting
Current funding-rate is not part of the historic data which means backtesting and hyperopt will not work correctly if this method is used, as the method will return up-to-date values. We recommend to use the historically available funding rate for backtesting (which is automatically downloaded, and is at the frequency of what the exchange provides, usually 4h or 8h). self.dp.get_pair_dataframe(pair=metadata['pair'], timeframe='8h', candle_type=\"funding_rate\")
The dataprovider .send_msg() function allows you to send custom notifications from your strategy. Identical notifications will only be sent once per candle, unless the 2nd argument (always_send) is set to True.
self.dp.send_msg(f\"{metadata['pair']} just got hot!\")\n\n # Force send this notification, avoid caching (Please read warning below!)\n self.dp.send_msg(f\"{metadata['pair']} just got hot!\", always_send=True)\nNotifications will only be sent in trading modes (Live/Dry-run) - so this method can be called without conditions for backtesting.
Spamming
You can spam yourself pretty good by setting always_send=True in this method. Use this with great care and only in conditions you know will not happen throughout a candle to avoid a message every 5 seconds.
from freqtrade.strategy import IStrategy, merge_informative_pair\nfrom pandas import DataFrame\n\nclass SampleStrategy(IStrategy):\n # strategy init stuff...\n\n timeframe = '5m'\n\n # more strategy init stuff..\n\n def informative_pairs(self):\n\n # get access to all pairs available in whitelist.\n pairs = self.dp.current_whitelist()\n # Assign tf to each pair so they can be downloaded and cached for strategy.\n informative_pairs = [(pair, '1d') for pair in pairs]\n # Optionally Add additional \"static\" pairs\n informative_pairs += [(\"ETH/USDT\", \"5m\"),\n (\"BTC/TUSD\", \"15m\"),\n ]\n return informative_pairs\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n if not self.dp:\n # Don't do anything if DataProvider is not available.\n return dataframe\n\n inf_tf = '1d'\n # Get the informative pair\n informative = self.dp.get_pair_dataframe(pair=metadata['pair'], timeframe=inf_tf)\n # Get the 14 day rsi\n informative['rsi'] = ta.RSI(informative, timeperiod=14)\n\n # Use the helper function merge_informative_pair to safely merge the pair\n # Automatically renames the columns and merges a shorter timeframe dataframe and a longer timeframe informative pair\n # use ffill to have the 1d value available in every row throughout the day.\n # Without this, comparisons between columns of the original and the informative pair would only work once per day.\n # Full documentation of this method, see below\n dataframe = merge_informative_pair(dataframe, informative, self.timeframe, inf_tf, ffill=True)\n\n # Calculate rsi of the original dataframe (5m timeframe)\n dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)\n\n # Do other stuff\n # ...\n\n return dataframe\n\n def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 30)) & # Signal: RSI crosses above 30\n (dataframe['rsi_1d'] < 30) & # Ensure daily RSI is < 30\n (dataframe['volume'] > 0) # Ensure this candle had volume (important for backtesting)\n ),\n ['enter_long', 'enter_tag']] = (1, 'rsi_cross')\nThe strategy provides access to the wallets object. This contains the current balances of your wallets/accounts on the exchange.
Backtesting / Hyperopt
Wallets behaves differently depending on the function from which it is called. Within populate_*() methods, it'll return the full wallet as configured. Within callbacks, you'll get the wallet state corresponding to the actual simulated wallet at that point in the simulation process.
Always check if wallets is available to avoid failures during backtesting.
if self.wallets:\n free_eth = self.wallets.get_free('ETH')\n used_eth = self.wallets.get_used('ETH')\n total_eth = self.wallets.get_total('ETH')\nget_free(asset) - currently available balance to tradeget_used(asset) - currently tied up balance (open orders)get_total(asset) - total available balance - sum of the 2 aboveA history of trades can be retrieved in the strategy by querying the database.
At the top of the file, import the required object:
from freqtrade.persistence import Trade\nThe following example queries trades from today for the current pair (metadata['pair']). Other filters can easily be added.
trades = Trade.get_trades_proxy(pair=metadata['pair'],\n open_date=datetime.now(timezone.utc) - timedelta(days=1),\n is_open=False,\n ]).order_by(Trade.close_date).all()\n# Summarize profit for this pair.\ncurdayprofit = sum(trade.close_profit for trade in trades)\nFor a full list of available methods, please consult the Trade object documentation.
Warning
Trade history is not available in populate_* methods during backtesting or hyperopt, and will result in empty results.
Freqtrade locks pairs automatically for the current candle (until that candle is over) when a pair exits, preventing an immediate re-entry of that pair.
This is to prevent \"waterfalls\" of many and frequent trades within a single candle.
Locked pairs will show the message Pair <pair> is currently locked..
Sometimes it may be desired to lock a pair after certain events happen (e.g. multiple losing trades in a row).
Freqtrade has an easy method to do this from within the strategy, by calling self.lock_pair(pair, until, [reason]). until must be a datetime object in the future, after which trading will be re-enabled for that pair, while reason is an optional string detailing why the pair was locked.
Locks can also be lifted manually, by calling self.unlock_pair(pair) or self.unlock_reason(<reason>), providing the reason the pair was unlocked. self.unlock_reason(<reason>) will unlock all pairs currently locked with the provided reason.
To verify if a pair is currently locked, use self.is_pair_locked(pair).
Note
Locked pairs will always be rounded up to the next candle. So assuming a 5m timeframe, a lock with until set to 10:18 will lock the pair until the candle from 10:15-10:20 will be finished.
Warning
Manually locking pairs is not available during backtesting. Only locks via Protections are allowed.
"},{"location":"strategy-customization/#pair-locking-example","title":"Pair locking example","text":"from freqtrade.persistence import Trade\nfrom datetime import timedelta, datetime, timezone\n# Put the above lines at the top of the strategy file, next to all the other imports\n# --------\n\n# Within populate indicators (or populate_entry_trend):\nif self.config['runmode'].value in ('live', 'dry_run'):\n # fetch closed trades for the last 2 days\n trades = Trade.get_trades_proxy(\n pair=metadata['pair'], is_open=False, \n open_date=datetime.now(timezone.utc) - timedelta(days=2))\n # Analyze the conditions you'd like to lock the pair .... will probably be different for every strategy\n sumprofit = sum(trade.close_profit for trade in trades)\n if sumprofit < 0:\n # Lock pair for 12 hours\n self.lock_pair(metadata['pair'], until=datetime.now(timezone.utc) + timedelta(hours=12))\nTo inspect the current main dataframe, you can issue a print-statement in either populate_entry_trend() or populate_exit_trend(). You may also want to print the pair so it's clear what data is currently shown.
def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe.loc[\n (\n #>> whatever condition<<<\n ),\n ['enter_long', 'enter_tag']] = (1, 'somestring')\n\n # Print the Analyzed pair\n print(f\"result for {metadata['pair']}\")\n\n # Inspect the last 5 rows\n print(dataframe.tail())\n\n return dataframe\nPrinting more than a few rows is also possible by using print(dataframe) instead of print(dataframe.tail()). However this is not recommended, as can results in a lot of output (~500 lines per pair every 5 seconds).
Backtesting analyzes the whole dataframe timerange at once for performance reasons. Because of this, strategy authors need to make sure that strategies do not lookahead into the future, i.e. using data that would not be available in dry or live mode.
This is a common pain-point, which can cause huge differences between backtesting and dry/live run methods. Strategies that look into the future will perform well during backtesting, often with incredible profits or winrates, but will fail or perform badly in real conditions.
The following list contains some common patterns which should be avoided to prevent frustration:
shift(-1) or other negative values. This uses data from the future in backtesting, which is not available in dry or live modes..iloc[-1] or any other absolute position in the dataframe within populate_ functions, as this will be different between dry-run and backtesting. Absolute iloc indexing is safe to use in callbacks however - see Strategy Callbacks.dataframe['mean_volume'] = dataframe['volume'].mean(). As backtesting uses the full dataframe, at any point in the dataframe, the 'mean_volume' series would include data from the future. Use rolling() calculations instead, e.g. dataframe['volume'].rolling(<window>).mean()..resample('1h'). This uses the left border of the period interval, so moves data from an hour boundary to the start of the hour. Use .resample('1h', label='right') instead..merge() to combine longer timeframes onto shorter ones. Instead, use the informative pair helpers. (A plain merge can implicitly cause a lookahead bias as date refers to open date, not close date).Identifying problems
You should always use the two helper commands lookahead-analysis and recursive-analysis, which can each help you figure out problems with your strategy in different ways. Please treat them as what they are - helpers to identify most common problems. A negative result of each does not guarantee that there are none of the above errors included.
"},{"location":"strategy-customization/#colliding-signals","title":"Colliding signals","text":"When conflicting signals collide (e.g. both 'enter_long' and 'exit_long' are set to 1), freqtrade will do nothing and ignore the entry signal. This will avoid trades that enter, and exit immediately. Obviously, this can potentially lead to missed entries.
The following rules apply, and entry signals will be ignored if more than one of the 3 signals is set:
enter_long -> exit_long, enter_shortenter_short -> exit_short, enter_longTo get additional ideas for strategies, head over to the strategy repository. Feel free to use them as examples, but results will depend on the current market situation, pairs used, etc. Therefore, these strategies should be considered only for learning purposes, not real world trading. Please backtest the strategy for your exchange/desired pairs first, then dry run to evaluate carefully, and use at your own risk.
Feel free to use any of them as inspiration for your own strategies. We're happy to accept Pull Requests containing new strategies to the repository.
"},{"location":"strategy-customization/#next-steps","title":"Next steps","text":"Now you have a perfect strategy you probably want to backtest it. Your next step is to learn how to use backtesting.
"},{"location":"strategy_analysis_example/","title":"Strategy analysis example","text":"Debugging a strategy can be time-consuming. Freqtrade offers helper functions to visualize raw data. The following assumes you work with SampleStrategy, data for 5m timeframe from Binance and have downloaded them into the data directory in the default location. Please follow the documentation for more details.
"},{"location":"strategy_analysis_example/#setup","title":"Setup","text":""},{"location":"strategy_analysis_example/#change-working-directory-to-repository-root","title":"Change Working directory to repository root","text":"import os\nfrom pathlib import Path\n\n\n# Change directory\n# Modify this cell to insure that the output shows the correct path.\n# Define all paths relative to the project root shown in the cell output\nproject_root = \"somedir/freqtrade\"\ni = 0\ntry:\n os.chdir(project_root)\n if not Path(\"LICENSE\").is_file():\n i = 0\n while i < 4 and (not Path(\"LICENSE\").is_file()):\n os.chdir(Path(Path.cwd(), \"../\"))\n i += 1\n project_root = Path.cwd()\nexcept FileNotFoundError:\n print(\"Please define the project root relative to the current directory\")\nprint(Path.cwd())\nfrom freqtrade.configuration import Configuration\n\n\n# Customize these according to your needs.\n\n# Initialize empty configuration object\nconfig = Configuration.from_files([])\n# Optionally (recommended), use existing configuration file\n# config = Configuration.from_files([\"user_data/config.json\"])\n\n# Define some constants\nconfig[\"timeframe\"] = \"5m\"\n# Name of the strategy class\nconfig[\"strategy\"] = \"SampleStrategy\"\n# Location of the data\ndata_location = config[\"datadir\"]\n# Pair to analyze - Only use one pair here\npair = \"BTC/USDT\"\n# Load data using values set above\nfrom freqtrade.data.history import load_pair_history\nfrom freqtrade.enums import CandleType\n\n\ncandles = load_pair_history(\n datadir=data_location,\n timeframe=config[\"timeframe\"],\n pair=pair,\n data_format=\"json\", # Make sure to update this to your data\n candle_type=CandleType.SPOT,\n)\n\n# Confirm success\nprint(f\"Loaded {len(candles)} rows of data for {pair} from {data_location}\")\ncandles.head()\n# Load strategy using values set above\nfrom freqtrade.data.dataprovider import DataProvider\nfrom freqtrade.resolvers import StrategyResolver\n\n\nstrategy = StrategyResolver.load_strategy(config)\nstrategy.dp = DataProvider(config, None, None)\nstrategy.ft_bot_start()\n\n# Generate buy/sell signals using strategy\ndf = strategy.analyze_ticker(candles, {\"pair\": pair})\ndf.tail()\ndata.head() would also work, however most indicators have some \"startup\" data at the top of the dataframe.crossed*() functions with completely different unitsanalyze_ticker() does not necessarily mean that 200 trades will be made during backtesting. * Assuming you use only one condition such as, df['rsi'] < 30 as buy condition, this will generate multiple \"buy\" signals for each pair in sequence (until rsi returns > 29). The bot will only buy on the first of these signals (and also only if a trade-slot (\"max_open_trades\") is still available), or on one of the middle signals, as soon as a \"slot\" becomes available. # Report results\nprint(f\"Generated {df['enter_long'].sum()} entry signals\")\ndata = df.set_index(\"date\", drop=False)\ndata.tail()\nThe following cells assume that you have already generated data using the cli. They will allow you to drill deeper into your results, and perform analysis which otherwise would make the output very difficult to digest due to information overload.
"},{"location":"strategy_analysis_example/#load-backtest-results-to-pandas-dataframe","title":"Load backtest results to pandas dataframe","text":"Analyze a trades dataframe (also used below for plotting)
from freqtrade.data.btanalysis import load_backtest_data, load_backtest_stats\n\n\n# if backtest_dir points to a directory, it'll automatically load the last backtest file.\nbacktest_dir = config[\"user_data_dir\"] / \"backtest_results\"\n# backtest_dir can also point to a specific file\n# backtest_dir = (\n# config[\"user_data_dir\"] / \"backtest_results/backtest-result-2020-07-01_20-04-22.json\"\n# )\n# You can get the full backtest statistics by using the following command.\n# This contains all information used to generate the backtest result.\nstats = load_backtest_stats(backtest_dir)\n\nstrategy = \"SampleStrategy\"\n# All statistics are available per strategy, so if `--strategy-list` was used during backtest,\n# this will be reflected here as well.\n# Example usages:\nprint(stats[\"strategy\"][strategy][\"results_per_pair\"])\n# Get pairlist used for this backtest\nprint(stats[\"strategy\"][strategy][\"pairlist\"])\n# Get market change (average change of all pairs from start to end of the backtest period)\nprint(stats[\"strategy\"][strategy][\"market_change\"])\n# Maximum drawdown ()\nprint(stats[\"strategy\"][strategy][\"max_drawdown_abs\"])\n# Maximum drawdown start and end\nprint(stats[\"strategy\"][strategy][\"drawdown_start\"])\nprint(stats[\"strategy\"][strategy][\"drawdown_end\"])\n\n\n# Get strategy comparison (only relevant if multiple strategies were compared)\nprint(stats[\"strategy_comparison\"])\n# Load backtested trades as dataframe\ntrades = load_backtest_data(backtest_dir)\n\n# Show value-counts per pair\ntrades.groupby(\"pair\")[\"exit_reason\"].value_counts()\n# Plotting equity line (starting with 0 on day 1 and adding daily profit for each backtested day)\n\nimport pandas as pd\nimport plotly.express as px\n\nfrom freqtrade.configuration import Configuration\nfrom freqtrade.data.btanalysis import load_backtest_stats\n\n\n# strategy = 'SampleStrategy'\n# config = Configuration.from_files([\"user_data/config.json\"])\n# backtest_dir = config[\"user_data_dir\"] / \"backtest_results\"\n\nstats = load_backtest_stats(backtest_dir)\nstrategy_stats = stats[\"strategy\"][strategy]\n\ndf = pd.DataFrame(columns=[\"dates\", \"equity\"], data=strategy_stats[\"daily_profit\"])\ndf[\"equity_daily\"] = df[\"equity\"].cumsum()\n\nfig = px.line(df, x=\"dates\", y=\"equity_daily\")\nfig.show()\nIn case you did already some trading and want to analyze your performance
from freqtrade.data.btanalysis import load_trades_from_db\n\n\n# Fetch trades from database\ntrades = load_trades_from_db(\"sqlite:///tradesv3.sqlite\")\n\n# Display results\ntrades.groupby(\"pair\")[\"exit_reason\"].value_counts()\nThis can be useful to find the best max_open_trades parameter, when used with backtesting in conjunction with a very high max_open_trades setting.
analyze_trade_parallelism() returns a timeseries dataframe with an \"open_trades\" column, specifying the number of open trades for each candle.
from freqtrade.data.btanalysis import analyze_trade_parallelism\n\n\n# Analyze the above\nparallel_trades = analyze_trade_parallelism(trades, \"5m\")\n\nparallel_trades.plot()\nFreqtrade offers interactive plotting capabilities based on plotly.
from freqtrade.plot.plotting import generate_candlestick_graph\n\n\n# Limit graph period to keep plotly quick and reactive\n\n# Filter trades to one pair\ntrades_red = trades.loc[trades[\"pair\"] == pair]\n\ndata_red = data[\"2019-06-01\":\"2019-06-10\"]\n# Generate candlestick graph\ngraph = generate_candlestick_graph(\n pair=pair,\n data=data_red,\n trades=trades_red,\n indicators1=[\"sma20\", \"ema50\", \"ema55\"],\n indicators2=[\"rsi\", \"macd\", \"macdsignal\", \"macdhist\"],\n)\n# Show graph inline\n# graph.show()\n\n# Render graph in a separate window\ngraph.show(renderer=\"browser\")\nimport plotly.figure_factory as ff\n\n\nhist_data = [trades.profit_ratio]\ngroup_labels = [\"profit_ratio\"] # name of the dataset\n\nfig = ff.create_distplot(hist_data, group_labels, bin_size=0.01)\nfig.show()\nFeel free to submit an issue or Pull Request enhancing this document if you would like to share ideas on how to best analyze the data.
"},{"location":"strategy_migration/","title":"Strategy Migration between V2 and V3","text":"To support new markets and trade-types (namely short trades / trades with leverage), some things had to change in the interface. If you intend on using markets other than spot markets, please migrate your strategy to the new format.
We have put a great effort into keeping compatibility with existing strategies, so if you just want to continue using freqtrade in spot markets, there should be no changes necessary for now.
You can use the quick summary as checklist. Please refer to the detailed sections below for full migration details.
"},{"location":"strategy_migration/#quick-summary-migration-checklist","title":"Quick summary / migration checklist","text":"Note : forcesell, forcebuy, emergencysell are changed to force_exit, force_enter, emergency_exit respectively.
populate_buy_trend() -> populate_entry_trend()populate_sell_trend() -> populate_exit_trend()custom_sell() -> custom_exit()check_buy_timeout() -> check_entry_timeout()check_sell_timeout() -> check_exit_timeout()side argument to callbacks without trade objectcustom_stake_amountconfirm_trade_entrycustom_entry_priceconfirm_trade_exitbuy -> enter_longsell -> exit_longbuy_tag -> enter_tag (used for both long and short trades)enter_short and corresponding new column exit_shortis_shortentry_sideexit_sidetrade_directionsell_reason -> exit_reasontrade.nr_of_successful_buys to trade.nr_of_successful_entries (mostly relevant for adjust_trade_position())leverage callback.@informative decorator now takes an optional candle_type argument.stoploss_from_open and stoploss_from_absolute now take is_short as additional argument.INTERFACE_VERSION should be set to 3.order_time_in_force buy -> entry, sell -> exit.order_types buy -> entry, sell -> exit.unfilledtimeout buy -> entry, sell -> exit.ignore_buying_expired_candle_after -> moved to root level instead of \"ask_strategy/exit_pricing\"exit_reason checks and eventually update your strategy.sell_signal -> exit_signalcustom_sell -> custom_exitforce_sell -> force_exitemergency_sell -> emergency_exitbid_strategy -> entry_pricingask_strategy -> exit_pricingask_last_balance -> price_last_balancebid_last_balance -> price_last_balancewebhookbuy -> entrywebhookbuyfill -> entry_fillwebhookbuycancel -> entry_cancelwebhooksell -> exitwebhooksellfill -> exit_fillwebhooksellcancel -> exit_cancelbuy -> entrybuy_fill -> entry_fillbuy_cancel -> entry_cancelsell -> exitsell_fill -> exit_fillsell_cancel -> exit_canceluse_sell_signal -> use_exit_signalsell_profit_only -> exit_profit_onlysell_profit_offset -> exit_profit_offsetignore_roi_if_buy_signal -> ignore_roi_if_entry_signalforcebuy_enable -> force_entry_enablepopulate_buy_trend","text":"In populate_buy_trend() - you will want to change the columns you assign from 'buy' to 'enter_long', as well as the method name from populate_buy_trend to populate_entry_trend.
def populate_buy_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 30)) & # Signal: RSI crosses above 30\n (dataframe['tema'] <= dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] > dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['buy', 'buy_tag']] = (1, 'rsi_cross')\n\n return dataframe\nAfter:
def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 30)) & # Signal: RSI crosses above 30\n (dataframe['tema'] <= dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] > dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['enter_long', 'enter_tag']] = (1, 'rsi_cross')\n\n return dataframe\nPlease refer to the Strategy documentation on how to enter and exit short trades.
"},{"location":"strategy_migration/#populate_sell_trend","title":"populate_sell_trend","text":"Similar to populate_buy_trend, populate_sell_trend() will be renamed to populate_exit_trend(). We'll also change the column from 'sell' to 'exit_long'.
def populate_sell_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 70)) & # Signal: RSI crosses above 70\n (dataframe['tema'] > dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] < dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['sell', 'exit_tag']] = (1, 'some_exit_tag')\n return dataframe\nAfter
def populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 70)) & # Signal: RSI crosses above 70\n (dataframe['tema'] > dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] < dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['exit_long', 'exit_tag']] = (1, 'some_exit_tag')\n return dataframe\nPlease refer to the Strategy documentation on how to enter and exit short trades.
"},{"location":"strategy_migration/#custom_sell","title":"custom_sell","text":"custom_sell has been renamed to custom_exit. It's now also being called for every iteration, independent of current profit and exit_profit_only settings.
class AwesomeStrategy(IStrategy):\n def custom_sell(self, pair: str, trade: 'Trade', current_time: 'datetime', current_rate: float,\n current_profit: float, **kwargs):\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n last_candle = dataframe.iloc[-1].squeeze()\n # ...\nclass AwesomeStrategy(IStrategy):\n def custom_exit(self, pair: str, trade: 'Trade', current_time: 'datetime', current_rate: float,\n current_profit: float, **kwargs):\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n last_candle = dataframe.iloc[-1].squeeze()\n # ...\ncustom_entry_timeout","text":"check_buy_timeout() has been renamed to check_entry_timeout(), and check_sell_timeout() has been renamed to check_exit_timeout().
class AwesomeStrategy(IStrategy):\n def check_buy_timeout(self, pair: str, trade: 'Trade', order: dict, \n current_time: datetime, **kwargs) -> bool:\n return False\n\n def check_sell_timeout(self, pair: str, trade: 'Trade', order: dict, \n current_time: datetime, **kwargs) -> bool:\n return False \nclass AwesomeStrategy(IStrategy):\n def check_entry_timeout(self, pair: str, trade: 'Trade', order: 'Order', \n current_time: datetime, **kwargs) -> bool:\n return False\n\n def check_exit_timeout(self, pair: str, trade: 'Trade', order: 'Order', \n current_time: datetime, **kwargs) -> bool:\n return False \ncustom_stake_amount","text":"New string argument side - which can be either \"long\" or \"short\".
class AwesomeStrategy(IStrategy):\n def custom_stake_amount(self, pair: str, current_time: datetime, current_rate: float,\n proposed_stake: float, min_stake: Optional[float], max_stake: float,\n entry_tag: Optional[str], **kwargs) -> float:\n # ... \n return proposed_stake\nclass AwesomeStrategy(IStrategy):\n def custom_stake_amount(self, pair: str, current_time: datetime, current_rate: float,\n proposed_stake: float, min_stake: float | None, max_stake: float,\n entry_tag: str | None, side: str, **kwargs) -> float:\n # ... \n return proposed_stake\nconfirm_trade_entry","text":"New string argument side - which can be either \"long\" or \"short\".
class AwesomeStrategy(IStrategy):\n def confirm_trade_entry(self, pair: str, order_type: str, amount: float, rate: float,\n time_in_force: str, current_time: datetime, entry_tag: Optional[str], \n **kwargs) -> bool:\n return True\nAfter:
class AwesomeStrategy(IStrategy):\n def confirm_trade_entry(self, pair: str, order_type: str, amount: float, rate: float,\n time_in_force: str, current_time: datetime, entry_tag: str | None, \n side: str, **kwargs) -> bool:\n return True\nconfirm_trade_exit","text":"Changed argument sell_reason to exit_reason. For compatibility, sell_reason will still be provided for a limited time.
class AwesomeStrategy(IStrategy):\n def confirm_trade_exit(self, pair: str, trade: Trade, order_type: str, amount: float,\n rate: float, time_in_force: str, sell_reason: str,\n current_time: datetime, **kwargs) -> bool:\n return True\nAfter:
class AwesomeStrategy(IStrategy):\n def confirm_trade_exit(self, pair: str, trade: Trade, order_type: str, amount: float,\n rate: float, time_in_force: str, exit_reason: str,\n current_time: datetime, **kwargs) -> bool:\n return True\ncustom_entry_price","text":"New string argument side - which can be either \"long\" or \"short\".
class AwesomeStrategy(IStrategy):\n def custom_entry_price(self, pair: str, current_time: datetime, proposed_rate: float,\n entry_tag: Optional[str], **kwargs) -> float:\n return proposed_rate\nAfter:
class AwesomeStrategy(IStrategy):\n def custom_entry_price(self, pair: str, trade: Trade | None, current_time: datetime, proposed_rate: float,\n entry_tag: str | None, side: str, **kwargs) -> float:\n return proposed_rate\nWhile adjust-trade-position itself did not change, you should no longer use trade.nr_of_successful_buys - and instead use trade.nr_of_successful_entries, which will also include short entries.
Added argument \"is_short\" to stoploss_from_open and stoploss_from_absolute. This should be given the value of trade.is_short.
def custom_stoploss(self, pair: str, trade: 'Trade', current_time: datetime,\n current_rate: float, current_profit: float, **kwargs) -> float:\n # once the profit has risen above 10%, keep the stoploss at 7% above the open price\n if current_profit > 0.10:\n return stoploss_from_open(0.07, current_profit)\n\n return stoploss_from_absolute(current_rate - (candle['atr'] * 2), current_rate)\n\n return 1\nAfter:
def custom_stoploss(self, pair: str, trade: 'Trade', current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool, \n **kwargs) -> float | None:\n # once the profit has risen above 10%, keep the stoploss at 7% above the open price\n if current_profit > 0.10:\n return stoploss_from_open(0.07, current_profit, is_short=trade.is_short)\n\n return stoploss_from_absolute(current_rate - (candle['atr'] * 2), current_rate, is_short=trade.is_short, leverage=trade.leverage)\norder_time_in_force","text":"order_time_in_force attributes changed from \"buy\" to \"entry\" and \"sell\" to \"exit\".
order_time_in_force: dict = {\n \"buy\": \"gtc\",\n \"sell\": \"gtc\",\n }\nAfter:
order_time_in_force: dict = {\n \"entry\": \"GTC\",\n \"exit\": \"GTC\",\n }\norder_types","text":"order_types have changed all wordings from buy to entry - and sell to exit. And two words are joined with _.
order_types = {\n \"buy\": \"limit\",\n \"sell\": \"limit\",\n \"emergencysell\": \"market\",\n \"forcesell\": \"market\",\n \"forcebuy\": \"market\",\n \"stoploss\": \"market\",\n \"stoploss_on_exchange\": false,\n \"stoploss_on_exchange_interval\": 60\n }\nAfter:
order_types = {\n \"entry\": \"limit\",\n \"exit\": \"limit\",\n \"emergency_exit\": \"market\",\n \"force_exit\": \"market\",\n \"force_entry\": \"market\",\n \"stoploss\": \"market\",\n \"stoploss_on_exchange\": false,\n \"stoploss_on_exchange_interval\": 60\n }\nuse_sell_signal -> use_exit_signalsell_profit_only -> exit_profit_onlysell_profit_offset -> exit_profit_offsetignore_roi_if_buy_signal -> ignore_roi_if_entry_signal # These values can be overridden in the config.\n use_sell_signal = True\n sell_profit_only = True\n sell_profit_offset: 0.01\n ignore_roi_if_buy_signal = False\nAfter:
# These values can be overridden in the config.\n use_exit_signal = True\n exit_profit_only = True\n exit_profit_offset: 0.01\n ignore_roi_if_entry_signal = False\nunfilledtimeout","text":"unfilledtimeout have changed all wordings from buy to entry - and sell to exit.
unfilledtimeout = {\n \"buy\": 10,\n \"sell\": 10,\n \"exit_timeout_count\": 0,\n \"unit\": \"minutes\"\n }\nAfter:
unfilledtimeout = {\n \"entry\": 10,\n \"exit\": 10,\n \"exit_timeout_count\": 0,\n \"unit\": \"minutes\"\n }\norder pricing","text":"Order pricing changed in 2 ways. bid_strategy was renamed to entry_pricing and ask_strategy was renamed to exit_pricing. The attributes ask_last_balance -> price_last_balance and bid_last_balance -> price_last_balance were renamed as well. Also, price-side can now be defined as ask, bid, same or other. Please refer to the pricing documentation for more information.
{\n \"bid_strategy\": {\n \"price_side\": \"bid\",\n \"use_order_book\": true,\n \"order_book_top\": 1,\n \"ask_last_balance\": 0.0,\n \"check_depth_of_market\": {\n \"enabled\": false,\n \"bids_to_ask_delta\": 1\n }\n },\n \"ask_strategy\":{\n \"price_side\": \"ask\",\n \"use_order_book\": true,\n \"order_book_top\": 1,\n \"bid_last_balance\": 0.0\n \"ignore_buying_expired_candle_after\": 120\n }\n}\nafter:
{\n \"entry_pricing\": {\n \"price_side\": \"same\",\n \"use_order_book\": true,\n \"order_book_top\": 1,\n \"price_last_balance\": 0.0,\n \"check_depth_of_market\": {\n \"enabled\": false,\n \"bids_to_ask_delta\": 1\n }\n },\n \"exit_pricing\":{\n \"price_side\": \"same\",\n \"use_order_book\": true,\n \"order_book_top\": 1,\n \"price_last_balance\": 0.0\n },\n \"ignore_buying_expired_candle_after\": 120\n}\nThe populate_any_indicators() method has been split into feature_engineering_expand_all(), feature_engineering_expand_basic(), feature_engineering_standard() andset_freqai_targets().
For each new function, the pair (and timeframe where necessary) will be automatically added to the column. As such, the definition of features becomes much simpler with the new logic.
For a full explanation of each method, please go to the corresponding freqAI documentation page
def populate_any_indicators(\n self, pair, df, tf, informative=None, set_generalized_indicators=False\n ):\n\n if informative is None:\n informative = self.dp.get_pair_dataframe(pair, tf)\n\n # first loop is automatically duplicating indicators for time periods\n for t in self.freqai_info[\"feature_parameters\"][\"indicator_periods_candles\"]:\n\n t = int(t)\n informative[f\"%-{pair}rsi-period_{t}\"] = ta.RSI(informative, timeperiod=t)\n informative[f\"%-{pair}mfi-period_{t}\"] = ta.MFI(informative, timeperiod=t)\n informative[f\"%-{pair}adx-period_{t}\"] = ta.ADX(informative, timeperiod=t)\n informative[f\"%-{pair}sma-period_{t}\"] = ta.SMA(informative, timeperiod=t)\n informative[f\"%-{pair}ema-period_{t}\"] = ta.EMA(informative, timeperiod=t)\n\n bollinger = qtpylib.bollinger_bands(\n qtpylib.typical_price(informative), window=t, stds=2.2\n )\n informative[f\"{pair}bb_lowerband-period_{t}\"] = bollinger[\"lower\"]\n informative[f\"{pair}bb_middleband-period_{t}\"] = bollinger[\"mid\"]\n informative[f\"{pair}bb_upperband-period_{t}\"] = bollinger[\"upper\"]\n\n informative[f\"%-{pair}bb_width-period_{t}\"] = (\n informative[f\"{pair}bb_upperband-period_{t}\"]\n - informative[f\"{pair}bb_lowerband-period_{t}\"]\n ) / informative[f\"{pair}bb_middleband-period_{t}\"]\n informative[f\"%-{pair}close-bb_lower-period_{t}\"] = (\n informative[\"close\"] / informative[f\"{pair}bb_lowerband-period_{t}\"]\n )\n\n informative[f\"%-{pair}roc-period_{t}\"] = ta.ROC(informative, timeperiod=t)\n\n informative[f\"%-{pair}relative_volume-period_{t}\"] = (\n informative[\"volume\"] / informative[\"volume\"].rolling(t).mean()\n ) # (1)\n\n informative[f\"%-{pair}pct-change\"] = informative[\"close\"].pct_change()\n informative[f\"%-{pair}raw_volume\"] = informative[\"volume\"]\n informative[f\"%-{pair}raw_price\"] = informative[\"close\"]\n # (2)\n\n indicators = [col for col in informative if col.startswith(\"%\")]\n # This loop duplicates and shifts all indicators to add a sense of recency to data\n for n in range(self.freqai_info[\"feature_parameters\"][\"include_shifted_candles\"] + 1):\n if n == 0:\n continue\n informative_shift = informative[indicators].shift(n)\n informative_shift = informative_shift.add_suffix(\"_shift-\" + str(n))\n informative = pd.concat((informative, informative_shift), axis=1)\n\n df = merge_informative_pair(df, informative, self.config[\"timeframe\"], tf, ffill=True)\n skip_columns = [\n (s + \"_\" + tf) for s in [\"date\", \"open\", \"high\", \"low\", \"close\", \"volume\"]\n ]\n df = df.drop(columns=skip_columns)\n\n # Add generalized indicators here (because in live, it will call this\n # function to populate indicators during training). Notice how we ensure not to\n # add them multiple times\n if set_generalized_indicators:\n df[\"%-day_of_week\"] = (df[\"date\"].dt.dayofweek + 1) / 7\n df[\"%-hour_of_day\"] = (df[\"date\"].dt.hour + 1) / 25\n # (3)\n\n # user adds targets here by prepending them with &- (see convention below)\n df[\"&-s_close\"] = (\n df[\"close\"]\n .shift(-self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .rolling(self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .mean()\n / df[\"close\"]\n - 1\n ) # (4)\n\n return df\nfeature_engineering_expand_allindicator_periods_candles - move tofeature_engineering_expand_basic().feature_engineering_standard().set_freqai_targets().Features will now expand automatically. As such, the expansion loops, as well as the {pair} / {timeframe} parts will need to be removed.
def feature_engineering_expand_all(self, dataframe, period, **kwargs) -> DataFrame::\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This function will automatically expand the defined features on the config defined\n `indicator_periods_candles`, `include_timeframes`, `include_shifted_candles`, and\n `include_corr_pairs`. In other words, a single feature defined in this function\n will automatically expand to a total of\n `indicator_periods_candles` * `include_timeframes` * `include_shifted_candles` *\n `include_corr_pairs` numbers of features added to the model.\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n More details on how these config defined parameters accelerate feature engineering\n in the documentation at:\n\n https://www.freqtrade.io/en/latest/freqai-parameter-table/#feature-parameters\n\n https://www.freqtrade.io/en/latest/freqai-feature-engineering/#defining-the-features\n\n :param df: strategy dataframe which will receive the features\n :param period: period of the indicator - usage example:\n dataframe[\"%-ema-period\"] = ta.EMA(dataframe, timeperiod=period)\n \"\"\"\n\n dataframe[\"%-rsi-period\"] = ta.RSI(dataframe, timeperiod=period)\n dataframe[\"%-mfi-period\"] = ta.MFI(dataframe, timeperiod=period)\n dataframe[\"%-adx-period\"] = ta.ADX(dataframe, timeperiod=period)\n dataframe[\"%-sma-period\"] = ta.SMA(dataframe, timeperiod=period)\n dataframe[\"%-ema-period\"] = ta.EMA(dataframe, timeperiod=period)\n\n bollinger = qtpylib.bollinger_bands(\n qtpylib.typical_price(dataframe), window=period, stds=2.2\n )\n dataframe[\"bb_lowerband-period\"] = bollinger[\"lower\"]\n dataframe[\"bb_middleband-period\"] = bollinger[\"mid\"]\n dataframe[\"bb_upperband-period\"] = bollinger[\"upper\"]\n\n dataframe[\"%-bb_width-period\"] = (\n dataframe[\"bb_upperband-period\"]\n - dataframe[\"bb_lowerband-period\"]\n ) / dataframe[\"bb_middleband-period\"]\n dataframe[\"%-close-bb_lower-period\"] = (\n dataframe[\"close\"] / dataframe[\"bb_lowerband-period\"]\n )\n\n dataframe[\"%-roc-period\"] = ta.ROC(dataframe, timeperiod=period)\n\n dataframe[\"%-relative_volume-period\"] = (\n dataframe[\"volume\"] / dataframe[\"volume\"].rolling(period).mean()\n )\n\n return dataframe\nBasic features. Make sure to remove the {pair} part from your features.
def feature_engineering_expand_basic(self, dataframe: DataFrame, **kwargs) -> DataFrame::\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This function will automatically expand the defined features on the config defined\n `include_timeframes`, `include_shifted_candles`, and `include_corr_pairs`.\n In other words, a single feature defined in this function\n will automatically expand to a total of\n `include_timeframes` * `include_shifted_candles` * `include_corr_pairs`\n numbers of features added to the model.\n\n Features defined here will *not* be automatically duplicated on user defined\n `indicator_periods_candles`\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n More details on how these config defined parameters accelerate feature engineering\n in the documentation at:\n\n https://www.freqtrade.io/en/latest/freqai-parameter-table/#feature-parameters\n\n https://www.freqtrade.io/en/latest/freqai-feature-engineering/#defining-the-features\n\n :param df: strategy dataframe which will receive the features\n dataframe[\"%-pct-change\"] = dataframe[\"close\"].pct_change()\n dataframe[\"%-ema-200\"] = ta.EMA(dataframe, timeperiod=200)\n \"\"\"\n dataframe[\"%-pct-change\"] = dataframe[\"close\"].pct_change()\n dataframe[\"%-raw_volume\"] = dataframe[\"volume\"]\n dataframe[\"%-raw_price\"] = dataframe[\"close\"]\n return dataframe\n def feature_engineering_standard(self, dataframe: DataFrame, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This optional function will be called once with the dataframe of the base timeframe.\n This is the final function to be called, which means that the dataframe entering this\n function will contain all the features and columns created by all other\n freqai_feature_engineering_* functions.\n\n This function is a good place to do custom exotic feature extractions (e.g. tsfresh).\n This function is a good place for any feature that should not be auto-expanded upon\n (e.g. day of the week).\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n More details about feature engineering available:\n\n https://www.freqtrade.io/en/latest/freqai-feature-engineering\n\n :param df: strategy dataframe which will receive the features\n usage example: dataframe[\"%-day_of_week\"] = (dataframe[\"date\"].dt.dayofweek + 1) / 7\n \"\"\"\n dataframe[\"%-day_of_week\"] = dataframe[\"date\"].dt.dayofweek\n dataframe[\"%-hour_of_day\"] = dataframe[\"date\"].dt.hour\n return dataframe\nTargets now get their own, dedicated method.
def set_freqai_targets(self, dataframe: DataFrame, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n Required function to set the targets for the model.\n All targets must be prepended with `&` to be recognized by the FreqAI internals.\n\n More details about feature engineering available:\n\n https://www.freqtrade.io/en/latest/freqai-feature-engineering\n\n :param df: strategy dataframe which will receive the targets\n usage example: dataframe[\"&-target\"] = dataframe[\"close\"].shift(-1) / dataframe[\"close\"]\n \"\"\"\n dataframe[\"&-s_close\"] = (\n dataframe[\"close\"]\n .shift(-self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .rolling(self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .mean()\n / dataframe[\"close\"]\n - 1\n )\n\n return dataframe\nIf you have created your own custom IFreqaiModel with a custom train()/predict() function, and you still rely on data_cleaning_train/predict(), then you will need to migrate to the new pipeline. If your model does not rely on data_cleaning_train/predict(), then you do not need to worry about this migration. That means that this migration guide is relevant for a very small percentage of power-users. If you stumbled upon this guide by mistake, feel free to inquire in depth about your problem in the Freqtrade discord server.
The conversion involves first removing data_cleaning_train/predict() and replacing them with a define_data_pipeline() and define_label_pipeline() function to your IFreqaiModel class:
class MyCoolFreqaiModel(BaseRegressionModel):\n \"\"\"\n Some cool custom IFreqaiModel you made before Freqtrade version 2023.6\n \"\"\"\n def train(\n self, unfiltered_df: DataFrame, pair: str, dk: FreqaiDataKitchen, **kwargs\n ) -> Any:\n\n # ... your custom stuff\n\n # Remove these lines\n # data_dictionary = dk.make_train_test_datasets(features_filtered, labels_filtered)\n # self.data_cleaning_train(dk)\n # data_dictionary = dk.normalize_data(data_dictionary)\n # (1)\n\n # Add these lines. Now we control the pipeline fit/transform ourselves\n dd = dk.make_train_test_datasets(features_filtered, labels_filtered)\n dk.feature_pipeline = self.define_data_pipeline(threads=dk.thread_count)\n dk.label_pipeline = self.define_label_pipeline(threads=dk.thread_count)\n\n (dd[\"train_features\"],\n dd[\"train_labels\"],\n dd[\"train_weights\"]) = dk.feature_pipeline.fit_transform(dd[\"train_features\"],\n dd[\"train_labels\"],\n dd[\"train_weights\"])\n\n (dd[\"test_features\"],\n dd[\"test_labels\"],\n dd[\"test_weights\"]) = dk.feature_pipeline.transform(dd[\"test_features\"],\n dd[\"test_labels\"],\n dd[\"test_weights\"])\n\n dd[\"train_labels\"], _, _ = dk.label_pipeline.fit_transform(dd[\"train_labels\"])\n dd[\"test_labels\"], _, _ = dk.label_pipeline.transform(dd[\"test_labels\"])\n\n # ... your custom code\n\n return model\n\n def predict(\n self, unfiltered_df: DataFrame, dk: FreqaiDataKitchen, **kwargs\n ) -> tuple[DataFrame, npt.NDArray[np.int_]]:\n\n # ... your custom stuff\n\n # Remove these lines:\n # self.data_cleaning_predict(dk)\n # (2)\n\n # Add these lines:\n dk.data_dictionary[\"prediction_features\"], outliers, _ = dk.feature_pipeline.transform(\n dk.data_dictionary[\"prediction_features\"], outlier_check=True)\n\n # Remove this line\n # pred_df = dk.denormalize_labels_from_metadata(pred_df)\n # (3)\n\n # Replace with these lines\n pred_df, _, _ = dk.label_pipeline.inverse_transform(pred_df)\n if self.freqai_info.get(\"DI_threshold\", 0) > 0:\n dk.DI_values = dk.feature_pipeline[\"di\"].di_values\n else:\n dk.DI_values = np.zeros(outliers.shape[0])\n dk.do_predict = outliers\n\n # ... your custom code\n return (pred_df, dk.do_predict)\ndefine_data_pipeline() and define_label_pipeline() functions. The data_cleaning_train() and data_cleaning_predict() functions are no longer used. You can override define_data_pipeline() to create your own custom pipeline if you wish.define_data_pipeline() and define_label_pipeline() functions. The data_cleaning_train() and data_cleaning_predict() functions are no longer used. You can override define_data_pipeline() to create your own custom pipeline if you wish.Below we explain how to create your Telegram Bot, and how to get your Telegram user id.
"},{"location":"telegram-usage/#1-create-your-telegram-bot","title":"1. Create your Telegram bot","text":"Start a chat with the Telegram BotFather
Send the message /newbot.
BotFather response:
Alright, a new bot. How are we going to call it? Please choose a name for your bot.
Choose the public name of your bot (e.x. Freqtrade bot)
BotFather response:
Good. Now let's choose a username for your bot. It must end in bot. Like this, for example: TetrisBot or tetris_bot.
Choose the name id of your bot and send it to the BotFather (e.g. \"My_own_freqtrade_bot\")
BotFather response:
Done! Congratulations on your new bot. You will find it at t.me/yourbots_name_bot. You can now add a description, about section and profile picture for your bot, see /help for a list of commands. By the way, when you've finished creating your cool bot, ping our Bot Support if you want a better username for it. Just make sure the bot is fully operational before you do this.
Use this token to access the HTTP API: 22222222:APITOKEN
For a description of the Bot API, see this page: https://core.telegram.org/bots/api Father bot will return you the token (API key)
Copy the API Token (22222222:APITOKEN in the above example) and keep use it for the config parameter token.
Don't forget to start the conversation with your bot, by clicking /START button
Talk to the userinfobot
Get your \"Id\", you will use it for the config parameter chat_id.
To get the group ID, you can add the bot to the group, start freqtrade, and issue a /tg_info command. This will return the group id to you, without having to use some random bot. While \"chat_id\" is still required, it doesn't need to be set to this particular group id for this command.
The response will also contain the \"topic_id\" if necessary - both in a format ready to copy/paste into your configuration.
{\n \"enabled\": true,\n \"token\": \"********\",\n \"chat_id\": \"-1001332619709\",\n \"topic_id\": \"122\"\n}\nFor the Freqtrade configuration, you can then use the full value (including - ) as string:
\"chat_id\": \"-1001332619709\"\nUsing telegram groups
When using telegram groups, you're giving every member of the telegram group access to your freqtrade bot and to all commands possible via telegram. Please make sure that you can trust everyone in the telegram group to avoid unpleasant surprises.
"},{"location":"telegram-usage/#group-topic-id","title":"Group Topic ID","text":"To use a specific topic in a group, you can use the topic_id parameter in the configuration. This will allow you to use the bot in a specific topic in a group. Without this, the bot will always respond to the general channel in the group if topics are enabled for a group chat.
\"chat_id\": \"-1001332619709\",\n \"topic_id\": \"3\"\nSimilar to the group-id - you can use /tg_info from the topic/thread to get the correct topic-id.
For groups, it can be useful to limit who can send commands to the bot.
If \"authorized_users\": [] is present and empty, no user will be allowed to control the bot. In the below example, only the user with the id \"1234567\" is allowed to control the bot - all other users will only be able to receive messages.
\"chat_id\": \"-1001332619709\",\n \"topic_id\": \"3\",\n \"authorized_users\": [\"1234567\"]\nFreqtrade provides means to control the verbosity of your telegram bot. Each setting has the following possible values:
on - Messages will be sent, and user will be notified.silent - Message will be sent, Notification will be without sound / vibration.off - Skip sending a message-type all together.Example configuration showing the different settings:
\"telegram\": {\n \"enabled\": true,\n \"token\": \"your_telegram_token\",\n \"chat_id\": \"your_telegram_chat_id\",\n \"allow_custom_messages\": true,\n \"notification_settings\": {\n \"status\": \"silent\",\n \"warning\": \"on\",\n \"startup\": \"off\",\n \"entry\": \"silent\",\n \"entry_fill\": \"on\",\n \"entry_cancel\": \"silent\",\n \"exit\": {\n \"roi\": \"silent\",\n \"emergency_exit\": \"on\",\n \"force_exit\": \"on\",\n \"exit_signal\": \"silent\",\n \"trailing_stop_loss\": \"on\",\n \"stop_loss\": \"on\",\n \"stoploss_on_exchange\": \"on\",\n \"custom_exit\": \"silent\", // custom_exit without specifying an exit reason\n \"partial_exit\": \"on\",\n // \"custom_exit_message\": \"silent\", // Disable individual custom exit reasons\n \"*\": \"off\" // Disable all other exit reasons\n },\n // \"exit\": \"off\", // Simplistic configuration to disable all exit messages\n \"exit_cancel\": \"on\",\n \"exit_fill\": \"off\",\n \"protection_trigger\": \"off\",\n \"protection_trigger_global\": \"on\",\n \"strategy_msg\": \"off\",\n \"show_candle\": \"off\"\n },\n \"reload\": true,\n \"balance_dust_level\": 0.01\n},\nentry notifications are sent when the order is placed, while entry_fill notifications are sent when the order is filled on the exchange. exit notifications are sent when the order is placed, while exit_fill notifications are sent when the order is filled on the exchange. Exit messages (exit and exit_fill) can be further controlled at individual exit reasons level, with the specific exit reason as the key. the default for all exit reasons is on - but can be configured via special * key - which will act as a wildcard for all exit reasons that are not explicitly defined.*_fill notifications are off by default and must be explicitly enabled. protection_trigger notifications are sent when a protection triggers and protection_trigger_global notifications trigger when global protections are triggered. strategy_msg - Receive notifications from the strategy, sent via self.dp.send_msg() from the strategy more details. show_candle - show candle values as part of entry/exit messages. Only possible values are \"ohlc\" or \"off\". balance_dust_level will define what the /balance command takes as \"dust\" - Currencies with a balance below this will be shown. allow_custom_messages completely disable strategy messages. reload allows you to disable reload-buttons on selected messages. Telegram allows us to create a custom keyboard with buttons for commands. The default custom keyboard looks like this.
[\n [\"/daily\", \"/profit\", \"/balance\"], # row 1, 3 commands\n [\"/status\", \"/status table\", \"/performance\"], # row 2, 3 commands\n [\"/count\", \"/start\", \"/stop\", \"/help\"] # row 3, 4 commands\n]\nYou can create your own keyboard in config.json:
\"telegram\": {\n \"enabled\": true,\n \"token\": \"your_telegram_token\",\n \"chat_id\": \"your_telegram_chat_id\",\n \"keyboard\": [\n [\"/daily\", \"/stats\", \"/balance\", \"/profit\"],\n [\"/status table\", \"/performance\"],\n [\"/reload_config\", \"/count\", \"/logs\"]\n ]\n },\nSupported Commands
Only the following commands are allowed. Command arguments are not supported!
/start, /pause, /stop, /status, /status table, /trades, /profit, /performance, /daily, /stats, /count, /locks, /balance, /stopentry, /reload_config, /show_config, /logs, /whitelist, /blacklist, /help, /version, /marketdir
Per default, the Telegram bot shows predefined commands. Some commands are only available by sending them to the bot. The table below list the official commands. You can ask at any moment for help with /help.
/start Starts the trader /pause | /stopentry | /stopbuy Pause the trader. Gracefully handle open trades according to their rules. Do not enter new positions. /stop Stops the trader /reload_config Reloads the configuration file /show_config Shows part of the current configuration with relevant settings to operation /logs [limit] Show last log messages. /help Show help message /version Show version Status /status Lists all open trades /status <trade_id> Lists one or more specific trade. Separate multiple with a blank space. /status table List all open trades in a table format. Pending buy orders are marked with an asterisk () Pending sell orders are marked with a double asterisk (*) /order <trade_id> Lists orders of one or more specific trade. Separate multiple with a blank space. /trades [limit] List all recently closed trades in a table format. /count Displays number of trades used and available /locks Show currently locked pairs. /unlock <pair or lock_id> Remove the lock for this pair (or for this lock id). /marketdir [long | short | even | none] Updates the user managed variable that represents the current market direction. If no direction is provided, the currently set direction will be displayed. /list_custom_data <trade_id> [key] List custom_data for Trade ID & Key combination. If no Key is supplied it will list all key-value pairs found for that Trade ID. Modify Trade states /forceexit <trade_id> | /fx <tradeid> Instantly exits the given trade (Ignoring minimum_roi). /forceexit all | /fx all Instantly exits all open trades (Ignoring minimum_roi). /fx alias for /forceexit /forcelong <pair> [rate] Instantly buys the given pair. Rate is optional and only applies to limit orders. (force_entry_enable must be set to True) /forceshort <pair> [rate] Instantly shorts the given pair. Rate is optional and only applies to limit orders. This will only work on non-spot markets. (force_entry_enable must be set to True) /delete <trade_id> Delete a specific trade from the Database. Tries to close open orders. Requires manual handling of this trade on the exchange. /reload_trade <trade_id> Reload a trade from the Exchange. Only works in live, and can potentially help recover a trade that was manually sold on the exchange. /cancel_open_order <trade_id> | /coo <trade_id> Cancel an open order for a trade. Metrics /profit [<n>] Display a summary of your profit/loss from close trades and some stats about your performance, over the last n days (all trades by default) /profit_[long|short] [<n>] Display a summary of your profit/loss from close trades in one direction and some stats about your performance, over the last n days (all trades by default) /performance Show performance of each finished trade grouped by pair /balance Show bot managed balance per currency /balance full Show account balance per currency /daily <n> Shows profit or loss per day, over the last n days (n defaults to 7) /weekly <n> Shows profit or loss per week, over the last n weeks (n defaults to 8) /monthly <n> Shows profit or loss per month, over the last n months (n defaults to 6) /stats Shows Wins / losses by Exit reason as well as Avg. holding durations for buys and sells /exits Shows Wins / losses by Exit reason as well as Avg. holding durations for buys and sells /entries Shows Wins / losses by Exit reason as well as Avg. holding durations for buys and sells /whitelist [sorted] [baseonly] Show the current whitelist. Optionally display in alphabetical order and/or with just the base currency of each pairing. /blacklist [pair] Show the current blacklist, or adds a pair to the blacklist."},{"location":"telegram-usage/#telegram-commands-in-action","title":"Telegram commands in action","text":"Below, example of Telegram message you will receive for each command.
"},{"location":"telegram-usage/#start","title":"/start","text":"Status: running
Status: paused, no more entries will occur from now. Run /start to enable entries.
Prevents the bot from opening new trades by changing the state to paused. Open trades will continue to be managed according to their regular rules (ROI/exit signals, stop-loss, etc.). Note that position adjustment remains active, but only on the exit side \u2014 meaning that when the bot is paused, it can only reduce the position size of open trades.
After this, give the bot time to close off open trades (can be checked via /status table). Once all positions are closed, run /stop to completely stop the bot.
Use /start to resume the bot to the running state, allowing it to open new positions.
Warning
The pause/stopentry signal is ONLY active while the bot is running, and is not persisted anyway, so restarting the bot will cause this to reset.
"},{"location":"telegram-usage/#stop","title":"/stop","text":"Stopping trader ... Status: stopped
For each open trade, the bot will send you the following message. Enter Tag is configurable via Strategy.
Trade ID: 123 (since 1 days ago) Current Pair: CVC/BTC Direction: Long Leverage: 1.0 Amount: 26.64180098 Enter Tag: Awesome Long Signal Open Rate: 0.00007489 Current Rate: 0.00007489 Unrealized Profit: 12.95% Stoploss: 0.00007389 (-0.02%)
Return the status of all open trades in a table format.
ID L/S Pair Since Profit\n---- -------- ------- --------\n 67 L SC/BTC 1 d 13.33%\n 123 S CVC/BTC 1 h 12.95%\nReturn the number of trades used and available.
current max\n--------- -----\n 2 10\nAlso available as /profit_long and /profit_short to show profit for long or short trades only.
Return a summary of your profit/loss and performance.
ROI: Close trades \u2219 0.00485701 BTC (2.2%) (15.2 \u03a3%) \u2219 62.968 USD ROI: All trades \u2219 0.00255280 BTC (1.5%) (6.43 \u03a3%) \u2219 33.095 EUR
Total Trade Count: 138 Bot started: 2022-07-11 18:40:44 First Trade opened: 3 days ago Latest Trade opened: 2 minutes ago Avg. Duration: 2:33:45 Best Performing: PAY/BTC: 50.23% Trading volume: 0.5 BTC Profit factor: 1.04 Win / Loss: 102 / 36 Winrate: 73.91% Expectancy (Ratio): 4.87 (1.66) Max Drawdown: 9.23% (0.01255 BTC)
The relative profit of 1.2% is the average profit per trade. The relative profit of 15.2 \u03a3% is be based on the starting capital - so in this case, the starting capital was 0.00485701 * 1.152 = 0.00738 BTC. Starting capital() is either taken from the available_capital setting, or calculated by using current wallet size - profits. Profit Factor is calculated as gross profits / gross losses - and should serve as an overall metric for the strategy. Expectancy corresponds to the average return per currency unit at risk, i.e. the winrate and the risk-reward ratio (the average gain of winning trades compared to the average loss of losing trades). Expectancy Ratio is expected profit or loss of a subsequent trade based on the performance of all past trades. Max drawdown corresponds to the backtesting metric Absolute Drawdown (Account) - calculated as (Absolute Drawdown) / (DrawdownHigh + startingBalance). Bot started date will refer to the date the bot was first started. For older bots, this will default to the first trade's open date.
BINANCE: Exiting BTC/LTC with limit 0.01650000 (profit: ~-4.07%, -0.00008168)
Tip
You can get a list of all open trades by calling /forceexit without parameter, which will show a list of buttons to simply exit a trade. This command has an alias in /fx - which has the same capabilities, but is faster to type in \"emergency\" situations.
/forcebuy <pair> [rate] is also supported for longs but should be considered deprecated.
BINANCE: Long ETH/BTC with limit 0.03400000 (1.000000 ETH, 225.290 USD)
Omitting the pair will open a query asking for the pair to trade (based on the current whitelist). Trades created through /forcelong will have the buy-tag of force_entry.
Note that for this to work, force_entry_enable needs to be set to true.
More details
","text":""},{"location":"telegram-usage/#performance","title":"/performanceReturn the performance of each crypto-currency the bot has sold.
Performance: 1. RCN/BTC 0.003 BTC (57.77%) (1) 2. PAY/BTC 0.0012 BTC (56.91%) (1) 3. VIB/BTC 0.0011 BTC (47.07%) (1) 4. SALT/BTC 0.0010 BTC (30.24%) (1) 5. STORJ/BTC 0.0009 BTC (27.24%) (1) ...
The relative performance is calculated against the total investment in the currency, aggregating all filled entries for the currency.
","text":""},{"location":"telegram-usage/#balance","title":"/balanceReturn the balance of all crypto-currency your have on the exchange.
Currency: BTC Available: 3.05890234 Balance: 3.05890234 Pending: 0.0
Currency: CVC Available: 86.64180098 Balance: 86.64180098 Pending: 0.0
","text":""},{"location":"telegram-usage/#daily","title":"/dailyPer default /daily will return the 7 last days. The example below if for /daily 3:
Daily Profit over the last 3 days:
Day (count) USDT USD Profit %\n-------------- ------------ ---------- ----------\n2022-06-11 (1) -0.746 USDT -0.75 USD -0.08%\n2022-06-10 (0) 0 USDT 0.00 USD 0.00%\n2022-06-09 (5) 20 USDT 20.10 USD 5.00%\nPer default /weekly will return the 8 last weeks, including the current week. Each week starts from Monday. The example below if for /weekly 3:
Weekly Profit over the last 3 weeks (starting from Monday):
Monday (count) Profit BTC Profit USD Profit %\n------------- -------------- ------------ ----------\n2018-01-03 (5) 0.00224175 BTC 29,142 USD 4.98%\n2017-12-27 (1) 0.00033131 BTC 4,307 USD 0.00%\n2017-12-20 (4) 0.00269130 BTC 34.986 USD 5.12%\nPer default /monthly will return the 6 last months, including the current month. The example below if for /monthly 3:
Monthly Profit over the last 3 months:
Month (count) Profit BTC Profit USD Profit %\n------------- -------------- ------------ ----------\n2018-01 (20) 0.00224175 BTC 29,142 USD 4.98%\n2017-12 (5) 0.00033131 BTC 4,307 USD 0.00%\n2017-11 (10) 0.00269130 BTC 34.986 USD 5.10%\nShows the current whitelist
Using whitelist StaticPairList with 22 pairs IOTA/BTC, NEO/BTC, TRX/BTC, VET/BTC, ADA/BTC, ETC/BTC, NCASH/BTC, DASH/BTC, XRP/BTC, XVG/BTC, EOS/BTC, LTC/BTC, OMG/BTC, BTG/BTC, LSK/BTC, ZEC/BTC, HOT/BTC, IOTX/BTC, XMR/BTC, AST/BTC, XLM/BTC, NANO/BTC
Shows the current blacklist. If Pair is set, then this pair will be added to the pairlist. Also supports multiple pairs, separated by a space. Use /reload_config to reset the blacklist.
Using blacklist StaticPairList with 2 pairs DODGE/BTC, HOT/BTC.
Version: 0.14.3
If a market direction is provided the command updates the user managed variable that represents the current market direction. This variable is not set to any valid market direction on bot startup and must be set by the user. The example below is for /marketdir long:
Successfully updated marketdirection from none to long.\nIf no market direction is provided the command outputs the currently set market directions. The example below is for /marketdir:
Currently set marketdirection: even\nYou can use the market direction in your strategy via self.market_direction.
Bot restarts
Please note that the market direction is not persisted, and will be reset after a bot restart/reload.
Backtesting
As this value/variable is intended to be changed manually in dry/live trading. Strategies using market_direction will probably not produce reliable, reproducible results (changes to this variable will not be reflected for backtesting). Use at your own risk.
A position freqtrade enters is stored in a Trade object - which is persisted to the database. It's a core concept of freqtrade - and something you'll come across in many sections of the documentation, which will most likely point you to this location.
It will be passed to the strategy in many strategy callbacks. The object passed to the strategy cannot be modified directly. Indirect modifications may occur based on callback results.
"},{"location":"trade-object/#trade-available-attributes","title":"Trade - Available attributes","text":"The following attributes / properties are available for each individual trade - and can be used with trade.<property> (e.g. trade.pair).
pair string Pair of this trade. is_open boolean Is the trade currently open, or has it been concluded. open_rate float Rate this trade was entered at (Avg. entry rate in case of trade-adjustments). close_rate float Close rate - only set when is_open = False. stake_amount float Amount in Stake (or Quote) currency. amount float Amount in Asset / Base currency that is currently owned. Will be 0.0 until the initial order fills. open_date datetime Timestamp when trade was opened use open_date_utc instead open_date_utc datetime Timestamp when trade was opened - in UTC. close_date datetime Timestamp when trade was closed use close_date_utc instead close_date_utc datetime Timestamp when trade was closed - in UTC. close_profit float Relative profit at the time of trade closure. 0.01 == 1% close_profit_abs float Absolute profit (in stake currency) at the time of trade closure. realized_profit float Absolute already realized profit (in stake currency) while the trade is still open. leverage float Leverage used for this trade - defaults to 1.0 in spot markets. enter_tag string Tag provided on entry via the enter_tag column in the dataframe. is_short boolean True for short trades, False otherwise. orders Order[] List of order objects attached to this trade (includes both filled and cancelled orders). date_last_filled_utc datetime Time of the last filled order. entry_side \"buy\" / \"sell\" Order Side the trade was entered. exit_side \"buy\" / \"sell\" Order Side that will result in a trade exit / position reduction. trade_direction \"long\" / \"short\" Trade direction in text - long or short. nr_of_successful_entries int Number of successful (filled) entry orders. nr_of_successful_exits int Number of successful (filled) exit orders. has_open_orders boolean Has the trade open orders (excluding stoploss orders)."},{"location":"trade-object/#class-methods","title":"Class methods","text":"The following are class methods - which return generic information, and usually result in an explicit query against the database. They can be used as Trade.<method> - e.g. open_trades = Trade.get_open_trade_count()
Backtesting/hyperopt
Most methods will work in both backtesting / hyperopt and live/dry modes. During backtesting, it's limited to usage in strategy callbacks. Usage in populate_*() methods is not supported and will result in wrong results.
When your strategy needs some information on existing (open or close) trades - it's best to use Trade.get_trades_proxy().
Usage:
from freqtrade.persistence import Trade\nfrom datetime import timedelta\n\n# ...\ntrade_hist = Trade.get_trades_proxy(pair='ETH/USDT', is_open=False, open_date=current_date - timedelta(days=2))\nget_trades_proxy() supports the following keyword arguments. All arguments are optional - calling get_trades_proxy() without arguments will return a list of all trades in the database.
pair e.g. pair='ETH/USDT'is_open e.g. is_open=Falseopen_date e.g. open_date=current_date - timedelta(days=2)close_date e.g. close_date=current_date - timedelta(days=5)Get the number of currently open trades
from freqtrade.persistence import Trade\n# ...\nopen_trades = Trade.get_open_trade_count()\nRetrieve the total profit the bot has generated so far. Aggregates close_profit_abs for all closed trades.
from freqtrade.persistence import Trade\n\n# ...\nprofit = Trade.get_total_closed_profit()\nRetrieve the total stake_amount that's currently in trades.
from freqtrade.persistence import Trade\n\n# ...\nprofit = Trade.total_open_trades_stakes()\nRetrieve the overall performance - similar to the /performance telegram command.
from freqtrade.persistence import Trade\n\n# ...\nif self.config['runmode'].value in ('live', 'dry_run'):\n performance = Trade.get_overall_performance()\nSample return value: ETH/BTC had 5 trades, with a total profit of 1.5% (ratio of 0.015).
{\"pair\": \"ETH/BTC\", \"profit\": 0.015, \"count\": 5}\nAn Order object represents an order on the exchange (or a simulated order in dry-run mode). An Order object will always be tied to it's corresponding Trade, and only really makes sense in the context of a trade.
an Order object is typically attached to a trade. Most properties here can be None as they are dependent on the exchange response.
Attribute DataType Descriptiontrade Trade Trade object this order is attached to ft_pair string Pair this order is for ft_is_open boolean is the order still open? order_type string Order type as defined on the exchange - usually market, limit or stoploss status string Status as defined by ccxt's order structure. Usually open, closed, expired, canceled or rejected side string buy or sell price float Price the order was placed at average float Average price the order filled at amount float Amount in base currency filled float Filled amount (in base currency) (use safe_filled instead) safe_filled float Filled amount (in base currency) - guaranteed to not be None remaining float Remaining amount (use safe_remaining instead) safe_remaining float Remaining amount - either taken from the exchange or calculated. cost float Cost of the order - usually average * filled (Exchange dependent on futures, may contain the cost with or without leverage and may be in contracts.) stake_amount float Stake amount used for this order. Added in 2023.7. stake_amount_filled float Filled Stake amount used for this order. Added in 2024.11. order_date datetime Order creation date use order_date_utc instead order_date_utc datetime Order creation date (in UTC) order_fill_date datetime Order fill date use order_fill_utc instead order_fill_date_utc datetime Order fill date"},{"location":"updating/","title":"How to update","text":"To update your freqtrade installation, please use one of the below methods, corresponding to your installation method.
Tracking changes
Breaking changes / changed behavior will be documented in the changelog that is posted alongside every release. For the develop branch, please follow PR's to avoid being surprised by changes.
"},{"location":"updating/#docker","title":"Docker","text":"Legacy installations using the master image
We're switching from master to stable for the release Images - please adjust your docker-file and replace freqtradeorg/freqtrade:master with freqtradeorg/freqtrade:stable
docker compose pull\ndocker compose up -d\n./setup.sh --update\nNote
Make sure to run this command with your virtual environment disabled!
"},{"location":"updating/#plain-native-installation","title":"Plain native installation","text":"Please ensure that you're also updating dependencies - otherwise things might break without you noticing.
git pull\npip install -U -r requirements.txt\npip install -e .\n\n# Ensure freqUI is at the latest version\nfreqtrade install-ui \nUpdate-problems usually come missing dependencies (you didn't follow the above instructions) - or from updated dependencies, which fail to install (for example TA-lib). Please refer to the corresponding installation sections (common problems linked below)
"},{"location":"utils/","title":"Utility Subcommands","text":"Besides the Live-Trade and Dry-Run run modes, the backtesting and hyperopt optimization subcommands, and the download-data subcommand which prepares historical data, the bot contains a number of utility subcommands. They are described in this section.
Creates the directory structure to hold your files for freqtrade. Will also create strategy and hyperopt examples for you to get started. Can be used multiple times - using --reset will reset the sample strategy and hyperopt files to their default state.
usage: freqtrade create-userdir [-h] [--userdir PATH] [--reset]\n\noptions:\n -h, --help show this help message and exit\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n --reset Reset sample files to their original state.\nWarning
Using --reset may result in loss of data, since this will overwrite all sample files without asking again.
\u251c\u2500\u2500 backtest_results\n\u251c\u2500\u2500 data\n\u251c\u2500\u2500 hyperopt_results\n\u251c\u2500\u2500 hyperopts\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 sample_hyperopt_loss.py\n\u251c\u2500\u2500 notebooks\n\u2502\u00a0\u00a0 \u2514\u2500\u2500 strategy_analysis_example.ipynb\n\u251c\u2500\u2500 plot\n\u2514\u2500\u2500 strategies\n \u2514\u2500\u2500 sample_strategy.py\nCreates a new configuration file, asking some questions which are important selections for a configuration.
usage: freqtrade new-config [-h] [-c PATH]\n\noptions:\n -h, --help show this help message and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\nWarning
Only vital questions are asked. Freqtrade offers a lot more configuration possibilities, which are listed in the Configuration documentation
"},{"location":"utils/#create-config-examples","title":"Create config examples","text":"$ freqtrade new-config --config user_data/config_binance.json\n\n? Do you want to enable Dry-run (simulated trades)? Yes\n? Please insert your stake currency: BTC\n? Please insert your stake amount: 0.05\n? Please insert max_open_trades (Integer or -1 for unlimited open trades): 3\n? Please insert your desired timeframe (e.g. 5m): 5m\n? Please insert your display Currency (for reporting): USD\n? Select exchange binance\n? Do you want to enable Telegram? No\nShow configuration file (with sensitive values redacted by default). Especially useful with split configuration files or environment variables, where this command will show the merged configuration.
usage: freqtrade show-config [-h] [--userdir PATH] [-c PATH]\n [--show-sensitive]\n\noptions:\n -h, --help show this help message and exit\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n --show-sensitive Show secrets in the output.\nYour combined configuration is:\n{\n \"exit_pricing\": {\n \"price_side\": \"other\",\n \"use_order_book\": true,\n \"order_book_top\": 1\n },\n \"stake_currency\": \"USDT\",\n \"exchange\": {\n \"name\": \"binance\",\n \"key\": \"REDACTED\",\n \"secret\": \"REDACTED\",\n \"ccxt_config\": {},\n \"ccxt_async_config\": {},\n }\n // ...\n}\nSharing information provided by this command
We try to remove all known sensitive information from the default output (without --show-sensitive). Yet, please do double-check for sensitive values in your output to make sure you're not accidentally exposing some private info.
Creates a new strategy from a template similar to SampleStrategy. The file will be named inline with your class name, and will not overwrite existing files.
Results will be located in user_data/strategies/<strategyclassname>.py.
usage: freqtrade new-strategy [-h] [--userdir PATH] [-s NAME]\n [--strategy-path PATH]\n [--template {full,minimal,advanced}]\n\noptions:\n -h, --help show this help message and exit\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --template {full,minimal,advanced}\n Use a template which is either `minimal`, `full`\n (containing multiple sample indicators) or `advanced`.\n Default: `full`.\nfreqtrade new-strategy --strategy AwesomeStrategy\nWith custom user directory
freqtrade new-strategy --userdir ~/.freqtrade/ --strategy AwesomeStrategy\nUsing the advanced template (populates all optional functions and methods)
freqtrade new-strategy --strategy AwesomeStrategy --template advanced\nUse the list-strategies subcommand to see all strategies in one particular directory.
This subcommand is useful for finding problems in your environment with loading strategies: modules with strategies that contain errors and failed to load are printed in red (LOAD FAILED), while strategies with duplicate names are printed in yellow (DUPLICATE NAME).
usage: freqtrade list-strategies [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [--strategy-path PATH] [-1]\n [--recursive-strategy-search]\n\noptions:\n -h, --help show this help message and exit\n --strategy-path PATH Specify additional strategy lookup path.\n -1, --one-column Print output in one column.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nWarning
Using these commands will try to load all python files from a directory. This can be a security risk if untrusted files reside in this directory, since all module-level code is executed.
Example: Search default strategies directories (within the default userdir).
freqtrade list-strategies\nExample: Search strategies directory within the userdir.
freqtrade list-strategies --userdir ~/.freqtrade/\nExample: Search dedicated strategy path.
freqtrade list-strategies --strategy-path ~/.freqtrade/strategies/\nUse the list-hyperoptloss subcommand to see all hyperopt loss functions available.
It provides a quick list of all available loss functions in your environment.
This subcommand can be useful for finding problems in your environment with loading loss functions: modules with Hyperopt-Loss functions that contain errors and failed to load are printed in red (LOAD FAILED), while hyperopt-Loss functions with duplicate names are printed in yellow (DUPLICATE NAME).
usage: freqtrade list-hyperoptloss [-h] [-v] [--no-color] [--logfile FILE]\n [-V] [-c PATH] [-d PATH] [--userdir PATH]\n [--hyperopt-path PATH] [-1]\n\noptions:\n -h, --help show this help message and exit\n --hyperopt-path PATH Specify additional lookup path for Hyperopt Loss\n functions.\n -1, --one-column Print output in one column.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nUse the list-freqaimodels subcommand to see all freqAI models available.
This subcommand is useful for finding problems in your environment with loading freqAI models: modules with models that contain errors and failed to load are printed in red (LOAD FAILED), while models with duplicate names are printed in yellow (DUPLICATE NAME).
usage: freqtrade list-freqaimodels [-h] [-v] [--no-color] [--logfile FILE]\n [-V] [-c PATH] [-d PATH] [--userdir PATH]\n [--freqaimodel-path PATH] [-1]\n\noptions:\n -h, --help show this help message and exit\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\n -1, --one-column Print output in one column.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nUse the list-exchanges subcommand to see the exchanges available for the bot.
usage: freqtrade list-exchanges [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH] [-1] [-a]\n [--trading-mode {spot,margin,futures}]\n [--dex-exchanges]\n\noptions:\n -h, --help show this help message and exit\n -1, --one-column Print output in one column.\n -a, --all Print all exchanges known to the ccxt library.\n --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}\n Select Trading mode\n --dex-exchanges Print only DEX exchanges.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nExample: see exchanges available for the bot:
$ freqtrade list-exchanges\nExchanges available for Freqtrade:\nExchange name Supported Markets Reason\n------------------ ----------- ---------------------- ------------------------------------------------------------------------\nbinance Official spot, isolated futures\nbitmart Official spot\nbybit spot, isolated futures\ngate Official spot, isolated futures\nhtx Official spot\nhuobi spot\nkraken Official spot\nokx Official spot, isolated futures\nOutput reduced for clarity - supported and available exchanges may change over time.
missing opt exchanges
Values with \"missing opt:\" might need special configuration (e.g. using orderbook if fetchTickers is missing) - but should in theory work (although we cannot guarantee they will).
Example: see all exchanges supported by the ccxt library (including 'bad' ones, i.e. those that are known to not work with Freqtrade)
$ freqtrade list-exchanges -a\nAll exchanges supported by the ccxt library:\nExchange name Valid Supported Markets Reason\n------------------ ------- ----------- ---------------------- ---------------------------------------------------------------------------------\nbinance True Official spot, isolated futures\nbitflyer False spot missing: fetchOrder. missing opt: fetchTickers.\nbitmart True Official spot\nbybit True spot, isolated futures\ngate True Official spot, isolated futures\nhtx True Official spot\nkraken True Official spot\nokx True Official spot, isolated futures\nReduced output - supported and available exchanges may change over time.
"},{"location":"utils/#list-timeframes","title":"List Timeframes","text":"Use the list-timeframes subcommand to see the list of timeframes available for the exchange.
usage: freqtrade list-timeframes [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [--exchange EXCHANGE] [-1]\n\noptions:\n -h, --help show this help message and exit\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\n -1, --one-column Print output in one column.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n$ freqtrade list-timeframes -c config_binance.json\n...\nTimeframes available for the exchange `binance`: 1m, 3m, 5m, 15m, 30m, 1h, 2h, 4h, 6h, 8h, 12h, 1d, 3d, 1w, 1M\n$ for i in `freqtrade list-exchanges -1`; do freqtrade list-timeframes --exchange $i; done\nThe list-pairs and list-markets subcommands allow to see the pairs/markets available on exchange.
Pairs are markets with the '/' character between the base currency part and the quote currency part in the market symbol. For example, in the 'ETH/BTC' pair 'ETH' is the base currency, while 'BTC' is the quote currency.
For pairs traded by Freqtrade the pair quote currency is defined by the value of the stake_currency configuration setting.
You can print info about any pair/market with these subcommands - and you can filter output by quote-currency using --quote BTC, or by base-currency using --base ETH options correspondingly.
These subcommands have same usage and same set of available options:
usage: freqtrade list-pairs [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [--exchange EXCHANGE] [--print-list]\n [--print-json] [-1] [--print-csv]\n [--base BASE_CURRENCY [BASE_CURRENCY ...]]\n [--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]] [-a]\n [--trading-mode {spot,margin,futures}]\n\noptions:\n -h, --help show this help message and exit\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\n --print-list Print list of pairs or market symbols. By default data\n is printed in the tabular format.\n --print-json Print list of pairs or market symbols in JSON format.\n -1, --one-column Print output in one column.\n --print-csv Print exchange pair or market data in the csv format.\n --base BASE_CURRENCY [BASE_CURRENCY ...]\n Specify base currency(-ies). Space-separated list.\n --quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]\n Specify quote currency(-ies). Space-separated list.\n -a, --all Print all pairs or market symbols. By default only\n active ones are shown.\n --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}\n Select Trading mode\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nBy default, only active pairs/markets are shown. Active pairs/markets are those that can currently be traded on the exchange. You can use the -a/-all option to see the list of all pairs/markets, including the inactive ones. Pairs may be listed as untradeable if the smallest tradeable price for the market is very small, i.e. less than 1e-11 (0.00000000001)
Pairs/markets are sorted by its symbol string in the printed output.
"},{"location":"utils/#examples","title":"Examples","text":"$ freqtrade list-pairs --quote USD --print-json\nconfig_binance.json configuration file (i.e. on the \"Binance\" exchange) with base currencies BTC or ETH and quote currencies USDT or USD, as the human-readable list with summary:$ freqtrade list-pairs -c config_binance.json --all --base BTC ETH --quote USDT USD --print-list\n$ freqtrade list-markets --exchange kraken --all\nUse the test-pairlist subcommand to test the configuration of dynamic pairlists.
Requires a configuration with specified pairlists attribute. Can be used to generate static pairlists to be used during backtesting / hyperopt.
usage: freqtrade test-pairlist [-h] [--userdir PATH] [-v] [-c PATH]\n [--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]]\n [-1] [--print-json] [--exchange EXCHANGE]\n\noptions:\n -h, --help show this help message and exit\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n --quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]\n Specify quote currency(-ies). Space-separated list.\n -1, --one-column Print output in one column.\n --print-json Print list of pairs or market symbols in JSON format.\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\nShow whitelist when using a dynamic pairlist.
freqtrade test-pairlist --config config.json --quote USDT BTC\nfreqtrade convert-db can be used to convert your database from one system to another (sqlite -> postgres, postgres -> other postgres), migrating all trades, orders and Pairlocks.
Please refer to the corresponding documentation to learn about requirements for different database systems.
usage: freqtrade convert-db [-h] [--db-url PATH] [--db-url-from PATH]\n\noptions:\n -h, --help show this help message and exit\n --db-url PATH Override trades database URL, this is useful in custom\n deployments (default: `sqlite:///tradesv3.sqlite` for\n Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for\n Dry Run).\n --db-url-from PATH Source db url to use when migrating a database.\nWarning
Please ensure to only use this on an empty target database. Freqtrade will perform a regular migration, but may fail if entries already existed.
"},{"location":"utils/#webserver-mode","title":"Webserver mode","text":"Experimental
Webserver mode is an experimental mode to increase backesting and strategy development productivity. There may still be bugs - so if you happen to stumble across these, please report them as github issues, thanks.
Run freqtrade in webserver mode. Freqtrade will start the webserver and allow FreqUI to start and control backtesting processes. This has the advantage that data will not be reloaded between backtesting runs (as long as timeframe and timerange remain identical). FreqUI will also show the backtesting results.
usage: freqtrade webserver [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n\noptions:\n -h, --help show this help message and exit\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nYou can also use webserver mode via docker. Starting a one-off container requires the configuration of the port explicitly, as ports are not exposed by default. You can use docker compose run --rm -p 127.0.0.1:8080:8080 freqtrade webserver to start a one-off container that'll be removed once you stop it. This assumes that port 8080 is still available and no other bot is running on that port.
Alternatively, you can reconfigure the docker-compose file to have the command updated:
command: >\n webserver\n --config /freqtrade/user_data/config.json\nYou can now use docker compose up to start the webserver. This assumes that the configuration has a webserver enabled and configured for docker (listening port = 0.0.0.0).
Tip
Don't forget to reset the command back to the trade command if you want to start a live or dry-run bot.
"},{"location":"utils/#show-previous-backtest-results","title":"Show previous Backtest results","text":"Allows you to show previous backtest results. Adding --show-pair-list outputs a sorted pair list you can easily copy/paste into your configuration (omitting bad pairs).
Only using winning pairs can lead to an overfitted strategy, which will not work well on future data. Make sure to extensively test your strategy in dry-run before risking real money.
usage: freqtrade backtesting-show [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [--backtest-filename PATH]\n [--backtest-directory PATH]\n [--show-pair-list]\n [--breakdown {day,week,month,year} [{day,week,month,year} ...]]\n\noptions:\n -h, --help show this help message and exit\n --backtest-filename PATH, --export-filename PATH\n Use this filename for backtest results.Example:\n `--backtest-\n filename=backtest_results_2020-09-27_16-20-48.json`.\n Assumes either `user_data/backtest_results/` or\n `--export-directory` as base directory.\n --backtest-directory PATH, --export-directory PATH\n Directory to use for backtest results. Example:\n `--export-directory=user_data/backtest_results/`.\n --show-pair-list Show backtesting pairlist sorted by profit.\n --breakdown {day,week,month,year} [{day,week,month,year} ...]\n Show backtesting breakdown per [day, week, month,\n year].\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nAdvanced backtest result analysis.
More details in the Backtesting analysis Section.
usage: freqtrade backtesting-analysis [-h] [-v] [--no-color] [--logfile FILE]\n [-V] [-c PATH] [-d PATH]\n [--userdir PATH]\n [--backtest-filename PATH]\n [--backtest-directory PATH]\n [--analysis-groups {0,1,2,3,4,5} [{0,1,2,3,4,5} ...]]\n [--enter-reason-list ENTER_REASON_LIST [ENTER_REASON_LIST ...]]\n [--exit-reason-list EXIT_REASON_LIST [EXIT_REASON_LIST ...]]\n [--indicator-list INDICATOR_LIST [INDICATOR_LIST ...]]\n [--entry-only] [--exit-only]\n [--timerange TIMERANGE]\n [--rejected-signals] [--analysis-to-csv]\n [--analysis-csv-path ANALYSIS_CSV_PATH]\n\noptions:\n -h, --help show this help message and exit\n --backtest-filename PATH, --export-filename PATH\n Use this filename for backtest results.Example:\n `--backtest-\n filename=backtest_results_2020-09-27_16-20-48.json`.\n Assumes either `user_data/backtest_results/` or\n `--export-directory` as base directory.\n --backtest-directory PATH, --export-directory PATH\n Directory to use for backtest results. Example:\n `--export-directory=user_data/backtest_results/`.\n --analysis-groups {0,1,2,3,4,5} [{0,1,2,3,4,5} ...]\n grouping output - 0: simple wins/losses by enter tag,\n 1: by enter_tag, 2: by enter_tag and exit_tag, 3: by\n pair and enter_tag, 4: by pair, enter_ and exit_tag\n (this can get quite large), 5: by exit_tag\n --enter-reason-list ENTER_REASON_LIST [ENTER_REASON_LIST ...]\n Space separated list of entry signals to analyse.\n Default: all. e.g. 'entry_tag_a entry_tag_b'\n --exit-reason-list EXIT_REASON_LIST [EXIT_REASON_LIST ...]\n Space separated list of exit signals to analyse.\n Default: all. e.g. 'exit_tag_a roi stop_loss\n trailing_stop_loss'\n --indicator-list INDICATOR_LIST [INDICATOR_LIST ...]\n Space separated list of indicators to analyse. e.g.\n 'close rsi bb_lowerband profit_abs'\n --entry-only Only analyze entry signals.\n --exit-only Only analyze exit signals.\n --timerange TIMERANGE\n Specify what timerange of data to use.\n --rejected-signals Analyse rejected signals\n --analysis-to-csv Save selected analysis tables to individual CSVs\n --analysis-csv-path ANALYSIS_CSV_PATH\n Specify a path to save the analysis CSVs if\n --analysis-to-csv is enabled. Default:\n user_data/basktesting_results/\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nYou can list the hyperoptimization epochs the Hyperopt module evaluated previously with the hyperopt-list sub-command.
usage: freqtrade hyperopt-list [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH] [--best]\n [--profitable] [--min-trades INT]\n [--max-trades INT] [--min-avg-time FLOAT]\n [--max-avg-time FLOAT] [--min-avg-profit FLOAT]\n [--max-avg-profit FLOAT]\n [--min-total-profit FLOAT]\n [--max-total-profit FLOAT]\n [--min-objective FLOAT] [--max-objective FLOAT]\n [--print-json] [--no-details]\n [--hyperopt-filename FILENAME]\n [--export-csv FILE]\n\noptions:\n -h, --help show this help message and exit\n --best Select only best epochs.\n --profitable Select only profitable epochs.\n --min-trades INT Select epochs with more than INT trades.\n --max-trades INT Select epochs with less than INT trades.\n --min-avg-time FLOAT Select epochs above average time.\n --max-avg-time FLOAT Select epochs below average time.\n --min-avg-profit FLOAT\n Select epochs above average profit.\n --max-avg-profit FLOAT\n Select epochs below average profit.\n --min-total-profit FLOAT\n Select epochs above total profit.\n --max-total-profit FLOAT\n Select epochs below total profit.\n --min-objective FLOAT\n Select epochs above objective.\n --max-objective FLOAT\n Select epochs below objective.\n --print-json Print output in JSON format.\n --no-details Do not print best epoch details.\n --hyperopt-filename FILENAME\n Hyperopt result filename.Example: `--hyperopt-\n filename=hyperopt_results_2020-09-27_16-20-48.pickle`\n --export-csv FILE Export to CSV-File. This will disable table print.\n Example: --export-csv hyperopt.csv\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nNote
hyperopt-list will automatically use the latest available hyperopt results file. You can override this using the --hyperopt-filename argument, and specify another, available filename (without path!).
List all results, print details of the best result at the end:
freqtrade hyperopt-list\nList only epochs with positive profit. Do not print the details of the best epoch, so that the list can be iterated in a script:
freqtrade hyperopt-list --profitable --no-details\nYou can show the details of any hyperoptimization epoch previously evaluated by the Hyperopt module with the hyperopt-show subcommand.
usage: freqtrade hyperopt-show [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH] [--best]\n [--profitable] [-n INT] [--print-json]\n [--hyperopt-filename FILENAME] [--no-header]\n [--disable-param-export]\n [--breakdown {day,week,month,year} [{day,week,month,year} ...]]\n\noptions:\n -h, --help show this help message and exit\n --best Select only best epochs.\n --profitable Select only profitable epochs.\n -n INT, --index INT Specify the index of the epoch to print details for.\n --print-json Print output in JSON format.\n --hyperopt-filename FILENAME\n Hyperopt result filename.Example: `--hyperopt-\n filename=hyperopt_results_2020-09-27_16-20-48.pickle`\n --no-header Do not print epoch details header.\n --disable-param-export\n Disable automatic hyperopt parameter export.\n --breakdown {day,week,month,year} [{day,week,month,year} ...]\n Show backtesting breakdown per [day, week, month,\n year].\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nNote
hyperopt-show will automatically use the latest available hyperopt results file. You can override this using the --hyperopt-filename argument, and specify another, available filename (without path!).
Print details for the epoch 168 (the number of the epoch is shown by the hyperopt-list subcommand or by Hyperopt itself during hyperoptimization run):
freqtrade hyperopt-show -n 168\nPrints JSON data with details for the last best epoch (i.e., the best of all epochs):
freqtrade hyperopt-show --best -n -1 --print-json --no-header\nPrint selected (or all) trades from database to screen.
usage: freqtrade show-trades [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [--db-url PATH]\n [--trade-ids TRADE_IDS [TRADE_IDS ...]]\n [--print-json]\n\noptions:\n -h, --help show this help message and exit\n --db-url PATH Override trades database URL, this is useful in custom\n deployments (default: `sqlite:///tradesv3.sqlite` for\n Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for\n Dry Run).\n --trade-ids TRADE_IDS [TRADE_IDS ...]\n Specify the list of trade ids.\n --print-json Print output in JSON format.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nPrint trades with id 2 and 3 as json
freqtrade show-trades --db-url sqlite:///tradesv3.sqlite --trade-ids 2 3 --print-json\nUpdates listed strategies or all strategies within the strategies folder to be v3 compliant. If the command runs without --strategy-list then all strategies inside the strategies folder will be converted. Your original strategy will remain available in the user_data/strategies_orig_updater/ directory.
Conversion results
Strategy updater will work on a \"best effort\" approach. Please do your due diligence and verify the results of the conversion. We also recommend to run a python formatter (e.g. black) to format results in a sane manner.
usage: freqtrade strategy-updater [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [--strategy-list STRATEGY_LIST [STRATEGY_LIST ...]]\n [--strategy-path PATH]\n [--recursive-strategy-search]\n\noptions:\n -h, --help show this help message and exit\n --strategy-list STRATEGY_LIST [STRATEGY_LIST ...]\n Provide a space-separated list of strategies to\n backtest. Please note that timeframe needs to be set\n either in config or via command line. When using this\n together with `--export trades`, the strategy-name is\n injected into the filename (so `backtest-data.json`\n becomes `backtest-data-SampleStrategy.json`\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nEnable webhooks by adding a webhook-section to your configuration file, and setting webhook.enabled to true.
Sample configuration (tested using IFTTT).
\"webhook\": {\n \"enabled\": true,\n \"url\": \"https://maker.ifttt.com/trigger/<YOUREVENT>/with/key/<YOURKEY>/\",\n \"entry\": {\n \"value1\": \"Buying {pair}\",\n \"value2\": \"limit {limit:8f}\",\n \"value3\": \"{stake_amount:8f} {stake_currency}\"\n },\n \"entry_cancel\": {\n \"value1\": \"Cancelling Open Buy Order for {pair}\",\n \"value2\": \"limit {limit:8f}\",\n \"value3\": \"{stake_amount:8f} {stake_currency}\"\n },\n \"entry_fill\": {\n \"value1\": \"Buy Order for {pair} filled\",\n \"value2\": \"at {open_rate:8f}\",\n \"value3\": \"\"\n },\n \"exit\": {\n \"value1\": \"Exiting {pair}\",\n \"value2\": \"limit {limit:8f}\",\n \"value3\": \"profit: {profit_amount:8f} {stake_currency} ({profit_ratio})\"\n },\n \"exit_cancel\": {\n \"value1\": \"Cancelling Open Exit Order for {pair}\",\n \"value2\": \"limit {limit:8f}\",\n \"value3\": \"profit: {profit_amount:8f} {stake_currency} ({profit_ratio})\"\n },\n \"exit_fill\": {\n \"value1\": \"Exit Order for {pair} filled\",\n \"value2\": \"at {close_rate:8f}.\",\n \"value3\": \"\"\n },\n \"status\": {\n \"value1\": \"Status: {status}\",\n \"value2\": \"\",\n \"value3\": \"\"\n }\n },\nThe url in webhook.url should point to the correct url for your webhook. If you're using IFTTT (as shown in the sample above) please insert your event and key to the url.
You can set the POST body format to Form-Encoded (default), JSON-Encoded, or raw data. Use \"format\": \"form\", \"format\": \"json\", or \"format\": \"raw\" respectively. Example configuration for Mattermost Cloud integration:
\"webhook\": {\n \"enabled\": true,\n \"url\": \"https://<YOURSUBDOMAIN>.cloud.mattermost.com/hooks/<YOURHOOK>\",\n \"format\": \"json\",\n \"status\": {\n \"text\": \"Status: {status}\"\n }\n },\nThe result would be a POST request with e.g. {\"text\":\"Status: running\"} body and Content-Type: application/json header which results Status: running message in the Mattermost channel.
When using the Form-Encoded or JSON-Encoded configuration you can configure any number of payload values, and both the key and value will be output in the POST request. However, when using the raw data format you can only configure one value and it must be named \"data\". In this instance the data key will not be output in the POST request, only the value. For example:
\"webhook\": {\n \"enabled\": true,\n \"url\": \"https://<YOURHOOKURL>\",\n \"format\": \"raw\",\n \"webhookstatus\": {\n \"data\": \"Status: {status}\"\n }\n },\nThe result would be a POST request with e.g. Status: running body and Content-Type: text/plain header.
Some webhook targets require a nested structure. This can be accomplished by setting the content as dictionary or list instead of as text directly.
This is only supported for the JSON format.
\"webhook\": {\n \"enabled\": true,\n \"url\": \"https://<yourhookurl>\",\n \"format\": \"json\",\n \"status\": {\n \"msgtype\": \"text\",\n \"text\": {\n \"content\": \"Status update: {status}\"\n }\n }\n}\nThe result would be a POST request with e.g. {\"msgtype\":\"text\",\"text\":{\"content\":\"Status update: running\"}} body and Content-Type: application/json header.
The webhook.retries parameter can be set for the maximum number of retries the webhook request should attempt if it is unsuccessful (i.e. HTTP response status is not 200). By default this is set to 0 which is disabled. An additional webhook.retry_delay parameter can be set to specify the time in seconds between retry attempts. By default this is set to 0.1 (i.e. 100ms). Note that increasing the number of retries or retry delay may slow down the trader if there are connectivity issues with the webhook. You can also specify webhook.timeout - which defines how long the bot will wait until it assumes the other host as unresponsive (defaults to 10s).
Example configuration for retries:
\"webhook\": {\n \"enabled\": true,\n \"url\": \"https://<YOURHOOKURL>\",\n \"timeout\": 10,\n \"retries\": 3,\n \"retry_delay\": 0.2,\n \"status\": {\n \"status\": \"Status: {status}\"\n }\n },\nCustom messages can be sent to Webhook endpoints via the self.dp.send_msg() function from within the strategy. To enable this, set the allow_custom_messages option to true:
\"webhook\": {\n \"enabled\": true,\n \"url\": \"https://<YOURHOOKURL>\",\n \"allow_custom_messages\": true,\n \"strategy_msg\": {\n \"status\": \"StrategyMessage: {msg}\"\n }\n },\nDifferent payloads can be configured for different events. Not all fields are necessary, but you should configure at least one of the dicts, otherwise the webhook will never be called.
"},{"location":"webhook-config/#webhook-message-types","title":"Webhook Message types","text":""},{"location":"webhook-config/#entry-entry-fill","title":"Entry / Entry fill","text":"The fields in webhook.entry and webhook.entry_fill are filled when the bot places a long/short Order to increase a position, or when that order fills respectively. Parameters are filled using string.format. Possible parameters are:
trade_idexchangepairdirectionleveragelimit # Deprecated - should no longer be used.open_rateamountopen_datestake_amountstake_currencybase_currencyquote_currencyfiat_currencyorder_typecurrent_rateenter_tagThe fields in webhook.entry_cancel are filled when the bot cancels a long/short order. Parameters are filled using string.format. Possible parameters are:
trade_idexchangepairdirectionleveragelimitamountopen_datestake_amountstake_currencybase_currencyquote_currencyfiat_currencyorder_typecurrent_rateenter_tagThe fields in webhook.exit and webhook.exit_fill are filled when the bot places an exit order, or when that exit order fills respectively. Parameters are filled using string.format. Possible parameters are:
trade_idexchangepairdirectionleveragegainamountopen_rateclose_ratecurrent_rateprofit_amountprofit_ratiostake_currencybase_currencyquote_currencyfiat_currencyenter_tagexit_reasonorder_typeopen_dateclose_datesub_tradeis_final_exitThe fields in webhook.exit_cancel are filled when the bot cancels a exit order. Parameters are filled using string.format. Possible parameters are:
trade_idexchangepairdirectionleveragegainorder_rateamountopen_ratecurrent_rateprofit_amountprofit_ratiostake_currencybase_currencyquote_currencyfiat_currencyexit_reasonorder_typeopen_dateclose_dateThe fields in webhook.status are used for regular status messages (Started / Stopped / ...). Parameters are filled using string.format.
The only possible value here is {status}.
A special form of webhooks is available for discord. You can configure this as follows:
\"discord\": {\n \"enabled\": true,\n \"webhook_url\": \"https://discord.com/api/webhooks/<Your webhook URL ...>\",\n \"exit_fill\": [\n {\"Trade ID\": \"{trade_id}\"},\n {\"Exchange\": \"{exchange}\"},\n {\"Pair\": \"{pair}\"},\n {\"Direction\": \"{direction}\"},\n {\"Open rate\": \"{open_rate}\"},\n {\"Close rate\": \"{close_rate}\"},\n {\"Amount\": \"{amount}\"},\n {\"Open date\": \"{open_date:%Y-%m-%d %H:%M:%S}\"},\n {\"Close date\": \"{close_date:%Y-%m-%d %H:%M:%S}\"},\n {\"Profit\": \"{profit_amount} {stake_currency}\"},\n {\"Profitability\": \"{profit_ratio:.2%}\"},\n {\"Enter tag\": \"{enter_tag}\"},\n {\"Exit Reason\": \"{exit_reason}\"},\n {\"Strategy\": \"{strategy}\"},\n {\"Timeframe\": \"{timeframe}\"},\n ],\n \"entry_fill\": [\n {\"Trade ID\": \"{trade_id}\"},\n {\"Exchange\": \"{exchange}\"},\n {\"Pair\": \"{pair}\"},\n {\"Direction\": \"{direction}\"},\n {\"Open rate\": \"{open_rate}\"},\n {\"Amount\": \"{amount}\"},\n {\"Open date\": \"{open_date:%Y-%m-%d %H:%M:%S}\"},\n {\"Enter tag\": \"{enter_tag}\"},\n {\"Strategy\": \"{strategy} {timeframe}\"},\n ]\n}\nThe above represents the default (exit_fill and entry_fill are optional and will default to the above configuration) - modifications are obviously possible. To disable either of the two default values (entry_fill / exit_fill), you can assign them an empty array (exit_fill: []).
Available fields correspond to the fields for webhooks and are documented in the corresponding webhook sections.
The notifications will look as follows by default.
Custom messages can be sent from a strategy to Discord endpoints via the dataprovider.send_msg() function. To enable this, set the allow_custom_messages option to true:
\"discord\": {\n \"enabled\": true,\n \"webhook_url\": \"https://discord.com/api/webhooks/<Your webhook URL ...>\",\n \"allow_custom_messages\": true,\n },\nWe strongly recommend that Windows users use Docker as this will work much easier and smoother (also more secure).
If that is not possible, try using the Windows Linux subsystem (WSL) - for which the Ubuntu instructions should work. Otherwise, please follow the instructions below.
All instructions assume that python 3.11+ is installed and available.
"},{"location":"windows_installation/#clone-the-git-repository","title":"Clone the git repository","text":"First of all clone the repository by running:
git clone https://github.com/freqtrade/freqtrade.git\nNow, choose your installation method, either automatically via script (recommended) or manually following the corresponding instructions.
"},{"location":"windows_installation/#install-freqtrade-automatically","title":"Install freqtrade automatically","text":""},{"location":"windows_installation/#run-the-installation-script","title":"Run the installation script","text":"The script will ask you a few questions to determine which parts should be installed.
Set-ExecutionPolicy -ExecutionPolicy Bypass\ncd freqtrade\n. .\\setup.ps1\n64bit Python version
Please make sure to use 64bit Windows and 64bit Python to avoid problems with backtesting or hyperopt due to the memory constraints 32bit applications have under Windows. 32bit python versions are no longer supported under Windows.
Hint
Using the Anaconda Distribution under Windows can greatly help with installation problems. Check out the Anaconda installation section in the documentation for more information.
"},{"location":"windows_installation/#error-during-installation-on-windows","title":"Error during installation on Windows","text":"error: Microsoft Visual C++ 14.0 is required. Get it with \"Microsoft Visual C++ Build Tools\": http://landinghub.visualstudio.com/visual-cpp-build-tools\nUnfortunately, many packages requiring compilation don't provide a pre-built wheel. It is therefore mandatory to have a C/C++ compiler installed and available for your python environment to use.
You can download the Visual C++ build tools from here and install \"Desktop development with C++\" in it's default configuration. Unfortunately, this is a heavy download / dependency so you might want to consider WSL2 or docker compose first.
"}]} \ No newline at end of file +{"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"]},"docs":[{"location":"","title":"Home","text":"Star Fork Download
"},{"location":"#introduction","title":"Introduction","text":"Freqtrade is a free and open source crypto trading bot written in Python. It is designed to support all major exchanges and be controlled via Telegram or webUI. It contains backtesting, plotting and money management tools as well as strategy optimization by machine learning.
DISCLAIMER
This software is for educational purposes only. Do not risk money which you are afraid to lose. USE THE SOFTWARE AT YOUR OWN RISK. THE AUTHORS AND ALL AFFILIATES ASSUME NO RESPONSIBILITY FOR YOUR TRADING RESULTS.
Always start by running a trading bot in Dry-run and do not engage money before you understand how it works and what profit/loss you should expect.
We strongly recommend you to have basic coding skills and Python knowledge. Do not hesitate to read the source code and understand the mechanisms of this bot, algorithms and techniques implemented in it.
"},{"location":"#features","title":"Features","text":"Please read the exchange specific notes to learn about eventual, special configurations needed for each exchange.
Please make sure to read the exchange specific notes, as well as the trading with leverage documentation before diving in.
"},{"location":"#community-tested","title":"Community tested","text":"Exchanges confirmed working by the community:
This section will highlight a few projects from members of the community.
Note
The projects below are for the most part not maintained by the freqtrade team, therefore use your own caution before using them.
To run this bot we recommend you a linux cloud instance with a minimum of:
Alternatively
For any questions not covered by the documentation or for further information about the bot, or to simply engage with like-minded individuals, we encourage you to join the Freqtrade discord server.
"},{"location":"#ready-to-try","title":"Ready to try?","text":"Begin by reading the installation guide for docker (recommended), or for installation without docker.
"},{"location":"advanced-backtesting/","title":"Advanced Backtesting Analysis","text":""},{"location":"advanced-backtesting/#analyze-the-buyentry-and-sellexit-tags","title":"Analyze the buy/entry and sell/exit tags","text":"It can be helpful to understand how a strategy behaves according to the buy/entry tags used to mark up different buy conditions. You might want to see more complex statistics about each buy and sell condition above those provided by the default backtesting output. You may also want to determine indicator values on the signal candle that resulted in a trade opening.
Note
The following buy reason analysis is only available for backtesting, not hyperopt.
We need to run backtesting with the --export option set to signals to enable the exporting of signals and trades:
freqtrade backtesting -c <config.json> --timeframe <tf> --strategy <strategy_name> --timerange=<timerange> --export=signals\nThis will tell freqtrade to output a pickled dictionary of strategy, pairs and corresponding DataFrame of the candles that resulted in entry and exit signals. Depending on how many entries your strategy makes, this file may get quite large, so periodically check your user_data/backtest_results folder to delete old exports.
Before running your next backtest, make sure you either delete your old backtest results or run backtesting with the --cache none option to make sure no cached results are used.
If all goes well, you should now see a backtest-result-{timestamp}_signals.pkl and backtest-result-{timestamp}_exited.pkl files in the user_data/backtest_results folder.
To analyze the entry/exit tags, we now need to use the freqtrade backtesting-analysis command with --analysis-groups option provided with space-separated arguments:
freqtrade backtesting-analysis -c <config.json> --analysis-groups 0 1 2 3 4 5\nThis command will read from the last backtesting results. The --analysis-groups option is used to specify the various tabular outputs showing the profit of each group or trade, ranging from the simplest (0) to the most detailed per pair, per buy and per sell tag (4):
More options are available by running with the -h option.
By default, backtesting-analysis processes the most recent backtest results in the user_data/backtest_results directory. If you want to analyze results from an earlier backtest, use the --backtest-filename option to specify the desired file. This lets you revisit and re-analyze historical backtest outputs at any time by providing the filename of the relevant backtest result:
freqtrade backtesting-analysis -c <config.json> --timeframe <tf> --strategy <strategy_name> --timerange <timerange> --export signals --backtest-filename backtest-result-2025-03-05_20-38-34.zip\nYou should see some output similar to below in the logs with the name of the timestamped filename that was exported:
2022-06-14 16:28:32,698 - freqtrade.misc - INFO - dumping json to \"mystrat_backtest-2022-06-14_16-28-32.json\"\nYou can then use that filename in backtesting-analysis:
freqtrade backtesting-analysis -c <config.json> --backtest-filename=mystrat_backtest-2022-06-14_16-28-32.json\nTo use a result from a different results directory, you can use --backtest-directory to specify the directory
freqtrade backtesting-analysis -c <config.json> --backtest-directory custom_results/ --backtest-filename mystrat_backtest-2022-06-14_16-28-32.json\nTo show only certain buy and sell tags in the displayed output, use the following two options:
--enter-reason-list : Space-separated list of enter signals to analyse. Default: \"all\"\n--exit-reason-list : Space-separated list of exit signals to analyse. Default: \"all\"\nFor example:
freqtrade backtesting-analysis -c <config.json> --analysis-groups 0 2 --enter-reason-list enter_tag_a enter_tag_b --exit-reason-list roi custom_exit_tag_a stop_loss\nThe real power of freqtrade backtesting-analysis comes from the ability to print out the indicator values present on signal candles to allow fine-grained investigation and tuning of buy signal indicators. To print out a column for a given set of indicators, use the --indicator-list option:
freqtrade backtesting-analysis -c <config.json> --analysis-groups 0 2 --enter-reason-list enter_tag_a enter_tag_b --exit-reason-list roi custom_exit_tag_a stop_loss --indicator-list rsi rsi_1h bb_lowerband ema_9 macd macdsignal\nThe indicators have to be present in your strategy's main DataFrame (either for your main timeframe or for informative timeframes) otherwise they will simply be ignored in the script output.
Indicator List
The indicator values will be displayed for both entry and exit points. If --indicator-list all is specified, only the indicators at the entry point will be shown to avoid excessively large lists, which could occur depending on the strategy.
There are a range of candle and trade-related fields that are included in the analysis so are automatically accessible by including them on the indicator-list, and these include:
freqtrade backtesting-analysis -c user_data/config.json --analysis-groups 0 --indicator-list chikou_span tenkan_sen \nIn this example, we aim to display the chikou_span and tenkan_sen indicator values at both the entry and exit points of trades.
A sample output for indicators might look like this:
pair open_date enter_reason exit_reason chikou_span (entry) tenkan_sen (entry) chikou_span (exit) tenkan_sen (exit) DOGE/USDT 2024-07-06 00:35:00+00:00 exit_signal 0.105 0.106 0.105 0.107 BTC/USDT 2024-08-05 14:20:00+00:00 roi 54643.440 51696.400 54386.000 52072.010As shown in the table, chikou_span (entry) represents the indicator value at the time of trade entry, while chikou_span (exit) reflects its value at the time of exit. This detailed view of indicator values enhances the analysis.
The (entry) and (exit) suffixes are added to indicators to distinguish the values at the entry and exit points of the trade.
Trade-wide Indicators
Certain trade-wide indicators do not have the (entry) or (exit) suffix. These indicators include: pair, stake_amount, max_stake_amount, amount, open_date, close_date, open_rate, close_rate, fee_open, fee_close, trade_duration, profit_ratio, profit_abs, exit_reason,initial_stop_loss_abs, initial_stop_loss_ratio, stop_loss_abs, stop_loss_ratio, min_rate, max_rate, is_open, enter_tag, leverage, is_short, open_timestamp, close_timestamp and orders
The --indicator-list option, by default, displays indicator values for both entry and exit signals. To filter the indicator values exclusively for entry signals, you can use the --entry-only argument. Similarly, to display indicator values only at exit signals, use the --exit-only argument.
Example: Display indicator values at entry signals:
freqtrade backtesting-analysis -c user_data/config.json --analysis-groups 0 --indicator-list chikou_span tenkan_sen --entry-only\nExample: Display indicator values at exit signals:
freqtrade backtesting-analysis -c user_data/config.json --analysis-groups 0 --indicator-list chikou_span tenkan_sen --exit-only\nNote
When using these filters, the indicator names will not be suffixed with (entry) or (exit).
To show only trades between dates within your backtested timerange, supply the usual timerange option in YYYYMMDD-[YYYYMMDD] format:
--timerange : Timerange to filter output trades, start date inclusive, end date exclusive. e.g. 20220101-20221231\nFor example, if your backtest timerange was 20220101-20221231 but you only want to output trades in January:
freqtrade backtesting-analysis -c <config.json> --timerange 20220101-20220201\nUse the --rejected-signals option to print out rejected signals.
freqtrade backtesting-analysis -c <config.json> --rejected-signals\nSome of the tabular outputs can become large, so printing them out to the terminal is not preferable. Use the --analysis-to-csv option to disable printing out of tables to standard out and write them to CSV files.
freqtrade backtesting-analysis -c <config.json> --analysis-to-csv\nBy default this will write one file per output table you specified in the backtesting-analysis command, e.g.
freqtrade backtesting-analysis -c <config.json> --analysis-to-csv --rejected-signals --analysis-groups 0 1\nThis will write to user_data/backtest_results:
To override where the files will be written, also specify the --analysis-csv-path option.
freqtrade backtesting-analysis -c <config.json> --analysis-to-csv --analysis-csv-path another/data/path/\nThis page explains some advanced Hyperopt topics that may require higher coding skills and Python knowledge than creation of an ordinal hyperoptimization class.
"},{"location":"advanced-hyperopt/#creating-and-using-a-custom-loss-function","title":"Creating and using a custom loss function","text":"To use a custom loss function class, make sure that the function hyperopt_loss_function is defined in your custom hyperopt loss class. For the sample below, you then need to add the command line parameter --hyperopt-loss SuperDuperHyperOptLoss to your hyperopt call so this function is being used.
A sample of this can be found below, which is identical to the Default Hyperopt loss implementation. A full sample can be found in userdata/hyperopts.
from datetime import datetime\nfrom typing import Any, Dict\n\nfrom pandas import DataFrame\n\nfrom freqtrade.constants import Config\nfrom freqtrade.optimize.hyperopt import IHyperOptLoss\n\nTARGET_TRADES = 600\nEXPECTED_MAX_PROFIT = 3.0\nMAX_ACCEPTED_TRADE_DURATION = 300\n\nclass SuperDuperHyperOptLoss(IHyperOptLoss):\n \"\"\"\n Defines the default loss function for hyperopt\n \"\"\"\n\n @staticmethod\n def hyperopt_loss_function(\n *,\n results: DataFrame,\n trade_count: int,\n min_date: datetime,\n max_date: datetime,\n config: Config,\n processed: dict[str, DataFrame],\n backtest_stats: dict[str, Any],\n starting_balance: float,\n **kwargs,\n ) -> float:\n \"\"\"\n Objective function, returns smaller number for better results\n This is the legacy algorithm (used until now in freqtrade).\n Weights are distributed as follows:\n * 0.4 to trade duration\n * 0.25: Avoiding trade loss\n * 1.0 to total profit, compared to the expected value (`EXPECTED_MAX_PROFIT`) defined above\n \"\"\"\n total_profit = results['profit_ratio'].sum()\n trade_duration = results['trade_duration'].mean()\n\n trade_loss = 1 - 0.25 * exp(-(trade_count - TARGET_TRADES) ** 2 / 10 ** 5.8)\n profit_loss = max(0, 1 - total_profit / EXPECTED_MAX_PROFIT)\n duration_loss = 0.4 * min(trade_duration / MAX_ACCEPTED_TRADE_DURATION, 1)\n result = trade_loss + profit_loss + duration_loss\n return result\nCurrently, the arguments are:
results: DataFrame containing the resulting trades. The following columns are available in results (corresponds to the output-file of backtesting when used with --export trades): pair, profit_ratio, profit_abs, open_date, open_rate, fee_open, close_date, close_rate, fee_close, amount, trade_duration, is_open, exit_reason, stake_amount, min_rate, max_rate, stop_loss_ratio, stop_loss_abstrade_count: Amount of trades (identical to len(results))min_date: Start date of the timerange usedmin_date: End date of the timerange usedconfig: Config object used (Note: Not all strategy-related parameters will be updated here if they are part of a hyperopt space).processed: Dict of Dataframes with the pair as keys containing the data used for backtesting.backtest_stats: Backtesting statistics using the same format as the backtesting file \"strategy\" substructure. Available fields can be seen in generate_strategy_stats() in optimize_reports.py.starting_balance: Starting balance used for backtesting.This function needs to return a floating point number (float). Smaller numbers will be interpreted as better results. The parameters and balancing for this is up to you.
Note
This function is called once per epoch - so please make sure to have this as optimized as possible to not slow hyperopt down unnecessarily.
*args and **kwargs
Please keep the arguments *args and **kwargs in the interface to allow us to extend this interface in the future.
To override a pre-defined space (roi_space, generate_roi_table, stoploss_space, trailing_space, max_open_trades_space), define a nested class called Hyperopt and define the required spaces as follows:
from freqtrade.optimize.space import Categorical, Dimension, Integer, SKDecimal\n\nclass MyAwesomeStrategy(IStrategy):\n class HyperOpt:\n # Define a custom stoploss space.\n def stoploss_space():\n return [SKDecimal(-0.05, -0.01, decimals=3, name='stoploss')]\n\n # Define custom ROI space\n def roi_space() -> List[Dimension]:\n return [\n Integer(10, 120, name='roi_t1'),\n Integer(10, 60, name='roi_t2'),\n Integer(10, 40, name='roi_t3'),\n SKDecimal(0.01, 0.04, decimals=3, name='roi_p1'),\n SKDecimal(0.01, 0.07, decimals=3, name='roi_p2'),\n SKDecimal(0.01, 0.20, decimals=3, name='roi_p3'),\n ]\n\n def generate_roi_table(params: Dict) -> dict[int, float]:\n\n roi_table = {}\n roi_table[0] = params['roi_p1'] + params['roi_p2'] + params['roi_p3']\n roi_table[params['roi_t3']] = params['roi_p1'] + params['roi_p2']\n roi_table[params['roi_t3'] + params['roi_t2']] = params['roi_p1']\n roi_table[params['roi_t3'] + params['roi_t2'] + params['roi_t1']] = 0\n\n return roi_table\n\n def trailing_space() -> List[Dimension]:\n # All parameters here are mandatory, you can only modify their type or the range.\n return [\n # Fixed to true, if optimizing trailing_stop we assume to use trailing stop at all times.\n Categorical([True], name='trailing_stop'),\n\n SKDecimal(0.01, 0.35, decimals=3, name='trailing_stop_positive'),\n # 'trailing_stop_positive_offset' should be greater than 'trailing_stop_positive',\n # so this intermediate parameter is used as the value of the difference between\n # them. The value of the 'trailing_stop_positive_offset' is constructed in the\n # generate_trailing_params() method.\n # This is similar to the hyperspace dimensions used for constructing the ROI tables.\n SKDecimal(0.001, 0.1, decimals=3, name='trailing_stop_positive_offset_p1'),\n\n Categorical([True, False], name='trailing_only_offset_is_reached'),\n ]\n\n # Define a custom max_open_trades space\n def max_open_trades_space(self) -> List[Dimension]:\n return [\n Integer(-1, 10, name='max_open_trades'),\n ]\nNote
All overrides are optional and can be mixed/matched as necessary.
"},{"location":"advanced-hyperopt/#dynamic-parameters","title":"Dynamic parameters","text":"Parameters can also be defined dynamically, but must be available to the instance once the bot_start() callback has been called.
class MyAwesomeStrategy(IStrategy):\n\n def bot_start(self, **kwargs) -> None:\n self.buy_adx = IntParameter(20, 30, default=30, optimize=True)\n\n # ...\nWarning
Parameters created this way will not show up in the list-strategies parameter count.
You can define your own optuna sampler for Hyperopt by implementing generate_estimator() in the Hyperopt subclass.
class MyAwesomeStrategy(IStrategy):\n class HyperOpt:\n def generate_estimator(dimensions: List['Dimension'], **kwargs):\n return \"NSGAIIISampler\"\nPossible values are either one of \"NSGAIISampler\", \"TPESampler\", \"GPSampler\", \"CmaEsSampler\", \"NSGAIIISampler\", \"QMCSampler\" (Details can be found in the optuna-samplers documentation), or \"an instance of a class that inherits from optuna.samplers.BaseSampler\".
Some research will be necessary to find additional Samplers (from optunahub) for example.
Note
While custom estimators can be provided, it's up to you as User to do research on possible parameters and analyze / understand which ones should be used. If you're unsure about this, best use one of the Defaults (\"NSGAIIISampler\" has proven to be the most versatile) without further parameters.
AutoSampler from Optunahub AutoSampler docs
Install the necessary dependencies
pip install optunahub cmaes torch scipy\ngenerate_estimator() in your strategy # ...\nfrom freqtrade.strategy.interface import IStrategy\nfrom typing import List\nimport optunahub\n# ... \n\nclass my_strategy(IStrategy):\n class HyperOpt:\n def generate_estimator(dimensions: List[\"Dimension\"], **kwargs):\n if \"random_state\" in kwargs.keys():\n return optunahub.load_module(\"samplers/auto_sampler\").AutoSampler(seed=kwargs[\"random_state\"])\n else:\n return optunahub.load_module(\"samplers/auto_sampler\").AutoSampler()\nObviously the same approach will work for all other Samplers optuna supports.
"},{"location":"advanced-hyperopt/#space-options","title":"Space options","text":"For the additional spaces, scikit-optimize (in combination with Freqtrade) provides the following space types:
Categorical - Pick from a list of categories (e.g. Categorical(['a', 'b', 'c'], name=\"cat\"))Integer - Pick from a range of whole numbers (e.g. Integer(1, 10, name='rsi'))SKDecimal - Pick from a range of decimal numbers with limited precision (e.g. SKDecimal(0.1, 0.5, decimals=3, name='adx')). Available only with freqtrade.Real - Pick from a range of decimal numbers with full precision (e.g. Real(0.1, 0.5, name='adx')You can import all of these from freqtrade.optimize.space, although Categorical, Integer and Real are only aliases for their corresponding scikit-optimize Spaces. SKDecimal is provided by freqtrade for faster optimizations.
from freqtrade.optimize.space import Categorical, Dimension, Integer, SKDecimal, Real # noqa\nSKDecimal vs. Real
We recommend to use SKDecimal instead of the Real space in almost all cases. While the Real space provides full accuracy (up to ~16 decimal places) - this precision is rarely needed, and leads to unnecessary long hyperopt times.
Assuming the definition of a rather small space (SKDecimal(0.10, 0.15, decimals=2, name='xxx')) - SKDecimal will have 5 possibilities ([0.10, 0.11, 0.12, 0.13, 0.14, 0.15]).
A corresponding real space Real(0.10, 0.15 name='xxx') on the other hand has an almost unlimited number of possibilities ([0.10, 0.010000000001, 0.010000000002, ... 0.014999999999, 0.01500000000]).
This guide walks you through utilizing public trade data for advanced orderflow analysis in Freqtrade.
Experimental Feature
The orderflow feature is currently in beta and may be subject to changes in future releases. Please report any issues or feedback on the Freqtrade GitHub repository. It's also currently not been tested with freqAI - and combining these two features is considered out of scope at this point.
Performance
Orderflow requires raw trades data. This data is rather large, and can cause a slow initial startup, when freqtrade needs to download the trades data for the last X candles. Additionally, enabling this feature will cause increased memory usage. Please ensure to have sufficient resources available.
"},{"location":"advanced-orderflow/#getting-started","title":"Getting Started","text":""},{"location":"advanced-orderflow/#enable-public-trades","title":"Enable Public Trades","text":"In your config.json file, set the use_public_trades option to true under the exchange section.
\"exchange\": {\n ...\n \"use_public_trades\": true,\n}\nDefine your desired settings for orderflow processing within the orderflow section of config.json. Here, you can adjust factors like:
cache_size: How many previous orderflow candles are saved into cache instead of calculated every new candlemax_candles: Filter how many candles would you like to get trades data for.scale: This controls the price bin size for the footprint chart.stacked_imbalance_range: Defines the minimum consecutive imbalanced price levels required for consideration.imbalance_volume: Filters out imbalances with volume below this threshold.imbalance_ratio: Filters out imbalances with a ratio (difference between ask and bid volume) lower than this value.\"orderflow\": {\n \"cache_size\": 1000, \n \"max_candles\": 1500, \n \"scale\": 0.5, \n \"stacked_imbalance_range\": 3, // needs at least this amount of imbalance next to each other\n \"imbalance_volume\": 1, // filters out below\n \"imbalance_ratio\": 3 // filters out ratio lower than\n },\nTo download historical trade data for backtesting, use the --dl-trades flag with the freqtrade download-data command.
freqtrade download-data -p BTC/USDT:USDT --timerange 20230101- --trading-mode futures --timeframes 5m --dl-trades\nData availability
Not all exchanges provide public trade data. For supported exchanges, freqtrade will warn you if public trade data is not available if you start downloading data with the --dl-trades flag.
Once activated, several new columns become available in your dataframe:
dataframe[\"trades\"] # Contains information about each individual trade.\ndataframe[\"orderflow\"] # Represents a footprint chart dict (see below)\ndataframe[\"imbalances\"] # Contains information about imbalances in the order flow.\ndataframe[\"bid\"] # Total bid volume \ndataframe[\"ask\"] # Total ask volume\ndataframe[\"delta\"] # Difference between ask and bid volume.\ndataframe[\"min_delta\"] # Minimum delta within the candle\ndataframe[\"max_delta\"] # Maximum delta within the candle\ndataframe[\"total_trades\"] # Total number of trades\ndataframe[\"stacked_imbalances_bid\"] # List of price levels of stacked bid imbalance range beginnings\ndataframe[\"stacked_imbalances_ask\"] # List of price levels of stacked ask imbalance range beginnings\nYou can access these columns in your strategy code for further analysis. Here's an example:
def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # Calculating cumulative delta\n dataframe[\"cum_delta\"] = cumulative_delta(dataframe[\"delta\"])\n # Accessing total trades\n total_trades = dataframe[\"total_trades\"]\n ...\n\ndef cumulative_delta(delta: Series):\n cumdelta = delta.cumsum()\n return cumdelta\ndataframe[\"orderflow\"])","text":"This column provides a detailed breakdown of buy and sell orders at different price levels, offering valuable insights into order flow dynamics. The scale parameter in your configuration determines the price bin size for this representation
The orderflow column contains a dict with the following structure:
{\n \"price\": {\n \"bid_amount\": 0.0,\n \"ask_amount\": 0.0,\n \"bid\": 0,\n \"ask\": 0,\n \"delta\": 0.0,\n \"total_volume\": 0.0,\n \"total_trades\": 0\n }\n}\nscale intervalsbid_amount: Total volume bought at each price level.ask_amount: Total volume sold at each price level.bid: Number of buy orders at each price level.ask: Number of sell orders at each price level.delta: Difference between ask and bid volume at each price level.total_volume: Total volume (ask amount + bid amount) at each price level.total_trades: Total number of trades (ask + bid) at each price level.By leveraging these features, you can gain valuable insights into market sentiment and potential trading opportunities based on order flow analysis.
"},{"location":"advanced-orderflow/#raw-trades-data-dataframetrades","title":"Raw trades data (dataframe[\"trades\"])","text":"List with the individual trades that occurred during the candle. This data can be used for more granular analysis of order flow dynamics.
Each individual entry contains a dict with the following keys:
timestamp: Timestamp of the trade.date: Date of the trade.price: Price of the trade.amount: Volume of the trade.side: Buy or sell.id: Unique identifier for the trade.cost: Total cost of the trade (price * amount).dataframe[\"imbalances\"])","text":"This column provides a dict with information about imbalances in the order flow. An imbalance occurs when there is a significant difference between the ask and bid volume at a given price level.
Each row looks as follows - with price as index, and the corresponding bid and ask imbalance values as columns
{\n \"price\": {\n \"bid_imbalance\": False,\n \"ask_imbalance\": False\n }\n}\nThis page explains some advanced tasks and configuration options that can be performed after the bot installation and may be uselful in some environments.
If you do not know what things mentioned here mean, you probably do not need it.
"},{"location":"advanced-setup/#running-multiple-instances-of-freqtrade","title":"Running multiple instances of Freqtrade","text":"This section will show you how to run multiple bots at the same time, on the same machine.
"},{"location":"advanced-setup/#things-to-consider","title":"Things to consider","text":"In order to keep track of your trades, profits, etc., freqtrade is using a SQLite database where it stores various types of information such as the trades you performed in the past and the current position(s) you are holding at any time. This allows you to keep track of your profits, but most importantly, keep track of ongoing activity if the bot process would be restarted or would be terminated unexpectedly.
Freqtrade will, by default, use separate database files for dry-run and live bots (this assumes no database-url is given in either configuration nor via command line argument). For live trading mode, the default database will be tradesv3.sqlite and for dry-run it will be tradesv3.dryrun.sqlite.
The optional argument to the trade command used to specify the path of these files is --db-url, which requires a valid SQLAlchemy url. So when you are starting a bot with only the config and strategy arguments in dry-run mode, the following 2 commands would have the same outcome.
freqtrade trade -c MyConfig.json -s MyStrategy\n# is equivalent to\nfreqtrade trade -c MyConfig.json -s MyStrategy --db-url sqlite:///tradesv3.dryrun.sqlite\nIt means that if you are running the trade command in two different terminals, for example to test your strategy both for trades in USDT and in another instance for trades in BTC, you will have to run them with different databases.
If you specify the URL of a database which does not exist, freqtrade will create one with the name you specified. So to test your custom strategy with BTC and USDT stake currencies, you could use the following commands (in 2 separate terminals):
# Terminal 1:\nfreqtrade trade -c MyConfigBTC.json -s MyCustomStrategy --db-url sqlite:///user_data/tradesBTC.dryrun.sqlite\n# Terminal 2:\nfreqtrade trade -c MyConfigUSDT.json -s MyCustomStrategy --db-url sqlite:///user_data/tradesUSDT.dryrun.sqlite\nConversely, if you wish to do the same thing in production mode, you will also have to create at least one new database (in addition to the default one) and specify the path to the \"live\" databases, for example:
# Terminal 1:\nfreqtrade trade -c MyConfigBTC.json -s MyCustomStrategy --db-url sqlite:///user_data/tradesBTC.live.sqlite\n# Terminal 2:\nfreqtrade trade -c MyConfigUSDT.json -s MyCustomStrategy --db-url sqlite:///user_data/tradesUSDT.live.sqlite\nFor more information regarding usage of the sqlite databases, for example to manually enter or remove trades, please refer to the SQL Cheatsheet.
"},{"location":"advanced-setup/#multiple-instances-using-docker","title":"Multiple instances using docker","text":"To run multiple instances of freqtrade using docker you will need to edit the docker-compose.yml file and add all the instances you want as separate services. Remember, you can separate your configuration into multiple files, so it's a good idea to think about making them modular, then if you need to edit something common to all bots, you can do that in a single config file.
---\nversion: '3'\nservices:\n freqtrade1:\n image: freqtradeorg/freqtrade:stable\n # image: freqtradeorg/freqtrade:develop\n # Use plotting image\n # image: freqtradeorg/freqtrade:develop_plot\n # Build step - only needed when additional dependencies are needed\n # build:\n # context: .\n # dockerfile: \"./docker/Dockerfile.custom\"\n restart: always\n container_name: freqtrade1\n volumes:\n - \"./user_data:/freqtrade/user_data\"\n # Expose api on port 8080 (localhost only)\n # Please read the https://www.freqtrade.io/en/latest/rest-api/ documentation\n # before enabling this.\n ports:\n - \"127.0.0.1:8080:8080\"\n # Default command used when running `docker compose up`\n command: >\n trade\n --logfile /freqtrade/user_data/logs/freqtrade1.log\n --db-url sqlite:////freqtrade/user_data/tradesv3_freqtrade1.sqlite\n --config /freqtrade/user_data/config.json\n --config /freqtrade/user_data/config.freqtrade1.json\n --strategy SampleStrategy\n\n freqtrade2:\n image: freqtradeorg/freqtrade:stable\n # image: freqtradeorg/freqtrade:develop\n # Use plotting image\n # image: freqtradeorg/freqtrade:develop_plot\n # Build step - only needed when additional dependencies are needed\n # build:\n # context: .\n # dockerfile: \"./docker/Dockerfile.custom\"\n restart: always\n container_name: freqtrade2\n volumes:\n - \"./user_data:/freqtrade/user_data\"\n # Expose api on port 8080 (localhost only)\n # Please read the https://www.freqtrade.io/en/latest/rest-api/ documentation\n # before enabling this.\n ports:\n - \"127.0.0.1:8081:8080\"\n # Default command used when running `docker compose up`\n command: >\n trade\n --logfile /freqtrade/user_data/logs/freqtrade2.log\n --db-url sqlite:////freqtrade/user_data/tradesv3_freqtrade2.sqlite\n --config /freqtrade/user_data/config.json\n --config /freqtrade/user_data/config.freqtrade2.json\n --strategy SampleStrategy\nYou can use whatever naming convention you want, freqtrade1 and 2 are arbitrary. Note, that you will need to use different database files, port mappings and telegram configurations for each instance, as mentioned above.
"},{"location":"advanced-setup/#use-a-different-database-system","title":"Use a different database system","text":"Freqtrade is using SQLAlchemy, which supports multiple different database systems. As such, a multitude of database systems should be supported. Freqtrade does not depend or install any additional database driver. Please refer to the SQLAlchemy docs on installation instructions for the respective database systems.
The following systems have been tested and are known to work with freqtrade:
Warning
By using one of the below database systems, you acknowledge that you know how to manage such a system. The freqtrade team will not provide any support with setup or maintenance (or backups) of the below database systems.
"},{"location":"advanced-setup/#postgresql","title":"PostgreSQL","text":"Installation: pip install psycopg2-binary
Usage: ... --db-url postgresql+psycopg2://<username>:<password>@localhost:5432/<database>
Freqtrade will automatically create the tables necessary upon startup.
If you're running different instances of Freqtrade, you must either setup one database per Instance or use different users / schemas for your connections.
"},{"location":"advanced-setup/#mariadb-mysql","title":"MariaDB / MySQL","text":"Freqtrade supports MariaDB by using SQLAlchemy, which supports multiple different database systems.
Installation: pip install pymysql
Usage: ... --db-url mysql+pymysql://<username>:<password>@localhost:3306/<database>
Copy the freqtrade.service file to your systemd user directory (usually ~/.config/systemd/user) and update WorkingDirectory and ExecStart to match your setup.
Note
Certain systems (like Raspbian) don't load service unit files from the user directory. In this case, copy freqtrade.service into /etc/systemd/user/ (requires superuser permissions).
After that you can start the daemon with:
systemctl --user start freqtrade\nFor this to be persistent (run when user is logged out) you'll need to enable linger for your freqtrade user.
sudo loginctl enable-linger \"$USER\"\nIf you run the bot as a service, you can use systemd service manager as a software watchdog monitoring freqtrade bot state and restarting it in the case of failures. If the internals.sd_notify parameter is set to true in the configuration or the --sd-notify command line option is used, the bot will send keep-alive ping messages to systemd using the sd_notify (systemd notifications) protocol and will also tell systemd its current state (Running, Paused or Stopped) when it changes.
The freqtrade.service.watchdog file contains an example of the service unit configuration file which uses systemd as the watchdog.
Note
The sd_notify communication between the bot and the systemd service manager will not work if the bot runs in a Docker container.
"},{"location":"advanced-setup/#advanced-logging","title":"Advanced Logging","text":"Freqtrade uses the default logging module provided by python. Python allows for extensive logging configuration in this regard - way more than what can be covered here.
Default logging format (coloured terminal output) is set up by default if no log_config is provided in your freqtrade configuration. Using --logfile logfile.log will enable the RotatingFileHandler.
If you're not content with the log format, or with the default settings provided for the RotatingFileHandler, you can customize logging to your liking by adding the log_config configuration to your freqtrade configuration file(s).
The default configuration looks roughly like the below, with the file handler being provided but not enabled as the filename is commented out. Uncomment this line and supply a valid path/filename to enable it.
{\n \"log_config\": {\n \"version\": 1,\n \"formatters\": {\n \"basic\": {\n \"format\": \"%(message)s\"\n },\n \"standard\": {\n \"format\": \"%(asctime)s - %(name)s - %(levelname)s - %(message)s\"\n }\n },\n \"handlers\": {\n \"console\": {\n \"class\": \"freqtrade.loggers.ft_rich_handler.FtRichHandler\",\n \"formatter\": \"basic\"\n },\n \"file\": {\n \"class\": \"logging.handlers.RotatingFileHandler\",\n \"formatter\": \"standard\",\n // \"filename\": \"someRandomLogFile.log\",\n \"maxBytes\": 10485760,\n \"backupCount\": 10\n }\n },\n \"root\": {\n \"handlers\": [\n \"console\",\n // \"file\"\n ],\n \"level\": \"INFO\",\n }\n }\n}\nhighlighted lines
Highlighted lines in the above code-block define the Rich handler and belong together. The formatter \"standard\" and \"file\" will belong to the FileHandler.
Each handler must use one of the defined formatters (by name), its class must be available, and must be a valid logging class. To actually use a handler, it must be in the \"handlers\" section inside the \"root\" segment. If this section is left out, freqtrade will provide no output (in the non-configured handler, anyway).
Explicit log configuration
We recommend to extract the logging configuration from your main freqtrade configuration file, and provide it to your bot via multiple configuration files functionality. This will avoid unnecessary code duplication.
On many Linux systems the bot can be configured to send its log messages to syslog or journald system services. Logging to a remote syslog server is also available on Windows. The special values for the --logfile command line option can be used for this.
To send Freqtrade log messages to a local or remote syslog service use the \"log_config\" setup option to configure logging.
{\n // ...\n \"log_config\": {\n \"version\": 1,\n \"formatters\": {\n \"syslog_fmt\": {\n \"format\": \"%(name)s - %(levelname)s - %(message)s\"\n }\n },\n \"handlers\": {\n // Other handlers? \n \"syslog\": {\n \"class\": \"logging.handlers.SysLogHandler\",\n \"formatter\": \"syslog_fmt\",\n // Use one of the other options above as address instead? \n \"address\": \"/dev/log\"\n }\n },\n \"root\": {\n \"handlers\": [\n // other handlers\n \"syslog\",\n\n ]\n }\n\n }\n}\nAdditional log-handlers may need to be configured to for example also have log output in the console.
"},{"location":"advanced-setup/#syslog-usage","title":"Syslog usage","text":"Log messages are send to syslog with the user facility. So you can see them with the following commands:
tail -f /var/log/user, orOn many systems syslog (rsyslog) fetches data from journald (and vice versa), so both syslog or journald can be used and the messages be viewed with both journalctl and a syslog viewer utility. You can combine this in any way which suites you better.
For rsyslog the messages from the bot can be redirected into a separate dedicated log file. To achieve this, add
if $programname startswith \"freqtrade\" then -/var/log/freqtrade.log\nto one of the rsyslog configuration files, for example at the end of the /etc/rsyslog.d/50-default.conf.
For syslog (rsyslog), the reduction mode can be switched on. This will reduce the number of repeating messages. For instance, multiple bot Heartbeat messages will be reduced to a single message when nothing else happens with the bot. To achieve this, set in /etc/rsyslog.conf:
# Filter duplicated messages\n$RepeatedMsgReduction on\nThe syslog address can be either a Unix domain socket (socket filename) or a UDP socket specification, consisting of IP address and UDP port, separated by the : character.
So, the following are the examples of possible addresses:
\"address\": \"/dev/log\" -- log to syslog (rsyslog) using the /dev/log socket, suitable for most systems.\"address\": \"/var/run/syslog\" -- log to syslog (rsyslog) using the /var/run/syslog socket. Use this on MacOS.\"address\": \"localhost:514\" -- log to local syslog using UDP socket, if it listens on port 514.\"address\": \"<ip>:514\" -- log to remote syslog at IP address and port 514. This may be used on Windows for remote logging to an external syslog server.--logfile syslog:<syslog_address> -- send log messages to syslog service using the <syslog_address> as the syslog address.
The syslog address can be either a Unix domain socket (socket filename) or a UDP socket specification, consisting of IP address and UDP port, separated by the : character.
So, the following are the examples of possible usages:
--logfile syslog:/dev/log -- log to syslog (rsyslog) using the /dev/log socket, suitable for most systems.--logfile syslog -- same as above, the shortcut for /dev/log.--logfile syslog:/var/run/syslog -- log to syslog (rsyslog) using the /var/run/syslog socket. Use this on MacOS.--logfile syslog:localhost:514 -- log to local syslog using UDP socket, if it listens on port 514.--logfile syslog:<ip>:514 -- log to remote syslog at IP address and port 514. This may be used on Windows for remote logging to an external syslog server.This needs the cysystemd python package installed as dependency (pip install cysystemd), which is not available on Windows. Hence, the whole journald logging functionality is not available for a bot running on Windows.
To send Freqtrade log messages to journald system service, add the following configuration snippet to your configuration.
{\n // ...\n \"log_config\": {\n \"version\": 1,\n \"formatters\": {\n \"journald_fmt\": {\n \"format\": \"%(name)s - %(levelname)s - %(message)s\"\n }\n },\n \"handlers\": {\n // Other handlers? \n \"journald\": {\n \"class\": \"cysystemd.journal.JournaldLogHandler\",\n \"formatter\": \"journald_fmt\",\n }\n },\n \"root\": {\n \"handlers\": [\n // .. \n \"journald\",\n\n ]\n }\n\n }\n}\nAdditional log-handlers may need to be configured to for example also have log output in the console.
Log messages are send to journald with the user facility. So you can see them with the following commands:
journalctl -f -- shows Freqtrade log messages sent to journald along with other log messages fetched by journald.journalctl -f -u freqtrade.service -- this command can be used when the bot is run as a systemd service.There are many other options in the journalctl utility to filter the messages, see manual pages for this utility.
On many systems syslog (rsyslog) fetches data from journald (and vice versa), so both --logfile syslog or --logfile journald can be used and the messages be viewed with both journalctl and a syslog viewer utility. You can combine this in any way which suites you better.
To send Freqtrade log messages to journald system service use the --logfile command line option with the value in the following format:
--logfile journald -- send log messages to journald.
You can also configure the default output stream to use JSON format instead. The \"fmt_dict\" attribute defines the keys for the json output - as well as the python logging LogRecord attributes.
The below configuration will change the default output to JSON. The same formatter could however also be used in combination with the RotatingFileHandler. We recommend to keep one format in human readable form.
{\n // ...\n \"log_config\": {\n \"version\": 1,\n \"formatters\": {\n \"json\": {\n \"()\": \"freqtrade.loggers.json_formatter.JsonFormatter\",\n \"fmt_dict\": {\n \"timestamp\": \"asctime\",\n \"level\": \"levelname\",\n \"logger\": \"name\",\n \"message\": \"message\"\n }\n }\n },\n \"handlers\": {\n // Other handlers? \n \"jsonStream\": {\n \"class\": \"logging.StreamHandler\",\n \"formatter\": \"json\"\n }\n },\n \"root\": {\n \"handlers\": [\n // .. \n \"jsonStream\",\n\n ]\n }\n\n }\n}\nThis page explains how to validate your strategy performance by using Backtesting.
Backtesting requires historic data to be available. To learn how to get data for the pairs and exchange you're interested in, head over to the Data Downloading section of the documentation.
Backtesting is also available in webserver mode, which allows you to run backtests via the web interface.
"},{"location":"backtesting/#backtesting-command-reference","title":"Backtesting command reference","text":"usage: freqtrade backtesting [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH] [-s NAME]\n [--strategy-path PATH]\n [--recursive-strategy-search]\n [--freqaimodel NAME] [--freqaimodel-path PATH]\n [-i TIMEFRAME] [--timerange TIMERANGE]\n [--data-format-ohlcv {json,jsongz,feather,parquet}]\n [--max-open-trades INT]\n [--stake-amount STAKE_AMOUNT] [--fee FLOAT]\n [-p PAIRS [PAIRS ...]] [--eps]\n [--enable-protections]\n [--enable-dynamic-pairlist]\n [--dry-run-wallet DRY_RUN_WALLET]\n [--timeframe-detail TIMEFRAME_DETAIL]\n [--strategy-list STRATEGY_LIST [STRATEGY_LIST ...]]\n [--export {none,trades,signals}]\n [--backtest-filename PATH]\n [--backtest-directory PATH]\n [--breakdown {day,week,month,year} [{day,week,month,year} ...]]\n [--cache {none,day,week,month}]\n [--freqai-backtest-live-models] [--notes TEXT]\n\noptions:\n -h, --help show this help message and exit\n -i TIMEFRAME, --timeframe TIMEFRAME\n Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).\n --timerange TIMERANGE\n Specify what timerange of data to use.\n --data-format-ohlcv {json,jsongz,feather,parquet}\n Storage format for downloaded candle (OHLCV) data.\n (default: `feather`).\n --max-open-trades INT\n Override the value of the `max_open_trades`\n configuration setting.\n --stake-amount STAKE_AMOUNT\n Override the value of the `stake_amount` configuration\n setting.\n --fee FLOAT Specify fee ratio. Will be applied twice (on trade\n entry and exit).\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --eps, --enable-position-stacking\n Allow buying the same pair multiple times (position\n stacking).\n --enable-protections, --enableprotections\n Enable protections for backtesting. Will slow\n backtesting down by a considerable amount, but will\n include configured protections\n --enable-dynamic-pairlist\n Enables dynamic pairlist refreshes in backtesting. The\n pairlist will be generated for each new candle if\n you're using a pairlist handler that supports this\n feature, for example, ShuffleFilter.\n --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET\n Starting balance, used for backtesting / hyperopt and\n dry-runs.\n --timeframe-detail TIMEFRAME_DETAIL\n Specify detail timeframe for backtesting (`1m`, `5m`,\n `30m`, `1h`, `1d`).\n --strategy-list STRATEGY_LIST [STRATEGY_LIST ...]\n Provide a space-separated list of strategies to\n backtest. Please note that timeframe needs to be set\n either in config or via command line. When using this\n together with `--export trades`, the strategy-name is\n injected into the filename (so `backtest-data.json`\n becomes `backtest-data-SampleStrategy.json`\n --export {none,trades,signals}\n Export backtest results (default: trades).\n --backtest-filename PATH, --export-filename PATH\n Use this filename for backtest results.Example:\n `--backtest-\n filename=backtest_results_2020-09-27_16-20-48.json`.\n Assumes either `user_data/backtest_results/` or\n `--export-directory` as base directory.\n --backtest-directory PATH, --export-directory PATH\n Directory to use for backtest results. Example:\n `--export-directory=user_data/backtest_results/`.\n --breakdown {day,week,month,year} [{day,week,month,year} ...]\n Show backtesting breakdown per [day, week, month,\n year].\n --cache {none,day,week,month}\n Load a cached backtest result no older than specified\n age (default: day).\n --freqai-backtest-live-models\n Run backtest with ready models.\n --notes TEXT Add notes to the backtest results.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n\nStrategy arguments:\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n --freqaimodel NAME Specify a custom freqaimodels.\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\nNow you have good Entry and exit strategies and some historic data, you want to test it against real data. This is what we call backtesting.
Backtesting will use the crypto-currencies (pairs) from your config file and load historical candle (OHLCV) data from user_data/data/<exchange> by default. If no data is available for the exchange / pair / timeframe combination, backtesting will ask you to download them first using freqtrade download-data. For details on downloading, please refer to the Data Downloading section in the documentation.
The result of backtesting will confirm if your bot has better odds of making a profit than a loss.
All profit calculations include fees, and freqtrade will use the exchange's default fees for the calculation.
Using dynamic pairlists for backtesting
Using dynamic pairlists is possible (not all of the handlers are allowed to be used in backtest mode), however it relies on the current market conditions - which will not reflect the historic status of the pairlist. Also, when using pairlists other than StaticPairlist, reproducibility of backtesting-results cannot be guaranteed. Please read the pairlists documentation for more information.
To achieve reproducible results, best generate a pairlist via the test-pairlist command and use that as static pairlist.
Note
By default, Freqtrade will export backtesting results to user_data/backtest_results. The exported trades can be used for further analysis or can be used by the plotting sub-command (freqtrade plot-dataframe) in the scripts directory.
Backtesting will require a starting balance, which can be provided as --dry-run-wallet <balance> or --starting-balance <balance> command line argument, or via dry_run_wallet configuration setting. This amount must be higher than stake_amount, otherwise the bot will not be able to simulate any trade.
Backtesting supports dynamic stake amount by configuring stake_amount as \"unlimited\", which will split the starting balance into max_open_trades pieces. Profits from early trades will result in subsequent higher stake amounts, resulting in compounding of profits over the backtesting period.
With 5 min candle (OHLCV) data (per default)
freqtrade backtesting --strategy AwesomeStrategy\nWhere --strategy AwesomeStrategy / -s AwesomeStrategy refers to the class name of the strategy, which is within a python file in the user_data/strategies directory.
With 1 min candle (OHLCV) data
freqtrade backtesting --strategy AwesomeStrategy --timeframe 1m\nProviding a custom starting balance of 1000 (in stake currency)
freqtrade backtesting --strategy AwesomeStrategy --dry-run-wallet 1000\nUsing a different on-disk historical candle (OHLCV) data source
Assume you downloaded the history data from the Binance exchange and kept it in the user_data/data/binance-20180101 directory. You can then use this data for backtesting as follows:
freqtrade backtesting --strategy AwesomeStrategy --datadir user_data/data/binance-20180101 \nComparing multiple Strategies
freqtrade backtesting --strategy-list SampleStrategy1 AwesomeStrategy --timeframe 5m\nWhere SampleStrategy1 and AwesomeStrategy refer to class names of strategies.
Prevent exporting trades to file
freqtrade backtesting --strategy backtesting --export none --config config.json \nOnly use this if you're sure you'll not want to plot or analyze your results further.
Exporting trades to file specifying a custom directory
freqtrade backtesting --strategy backtesting --export trades --backtest-directory=user_data/custom-backtest-results\nPlease also read about the strategy startup period.
Supplying custom fee value
Sometimes your account has certain fee rebates (fee reductions starting with a certain account size or monthly volume), which are not visible to ccxt. To account for this in backtesting, you can use the --fee command line option to supply this value to backtesting. This fee must be a ratio, and will be applied twice (once for trade entry, and once for trade exit).
For example, if the commission fee per order is 0.1% (i.e., 0.001 written as ratio), then you would run backtesting as the following:
freqtrade backtesting --fee 0.001\nNote
Only supply this option (or the corresponding configuration parameter) if you want to experiment with different fee values. By default, Backtesting fetches the default fee from the exchange pair/market info.
Running backtest with smaller test-set by using timerange
Use the --timerange argument to change how much of the test-set you want to use.
For example, running backtesting with the --timerange=20190501- option will use all available data starting with May 1st, 2019 from your input data.
freqtrade backtesting --timerange=20190501-\nYou can also specify particular date ranges.
The full timerange specification:
--timerange=-20180131--timerange=20180131---timerange=20180131-20180301--timerange=1527595200-1527618600The most important in the backtesting is to understand the result.
A backtesting result will look like that:
BACKTESTING REPORT \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Pair \u2503 Trades \u2503 Avg Profit % \u2503 Tot Profit USDT \u2503 Tot Profit % \u2503 Avg Duration \u2503 Win Draw Loss Win% \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 LTC/USDT:USDT \u2502 16 \u2502 1.0 \u2502 56.176 \u2502 5.62 \u2502 16:16:00 \u2502 16 0 0 100 \u2502\n\u2502 ETC/USDT:USDT \u2502 12 \u2502 0.72 \u2502 30.936 \u2502 3.09 \u2502 9:55:00 \u2502 11 0 1 91.7 \u2502\n\u2502 ETH/USDT:USDT \u2502 8 \u2502 0.66 \u2502 17.864 \u2502 1.79 \u2502 1 day, 13:55:00 \u2502 7 0 1 87.5 \u2502\n\u2502 XLM/USDT:USDT \u2502 10 \u2502 0.31 \u2502 11.054 \u2502 1.11 \u2502 12:08:00 \u2502 9 0 1 90.0 \u2502\n\u2502 BTC/USDT:USDT \u2502 8 \u2502 0.21 \u2502 7.289 \u2502 0.73 \u2502 3 days, 1:24:00 \u2502 6 0 2 75.0 \u2502\n\u2502 XRP/USDT:USDT \u2502 9 \u2502 -0.14 \u2502 -7.261 \u2502 -0.73 \u2502 21:18:00 \u2502 8 0 1 88.9 \u2502\n\u2502 DOT/USDT:USDT \u2502 6 \u2502 -0.4 \u2502 -9.187 \u2502 -0.92 \u2502 5:35:00 \u2502 4 0 2 66.7 \u2502\n\u2502 ADA/USDT:USDT \u2502 8 \u2502 -1.76 \u2502 -52.098 \u2502 -5.21 \u2502 11:38:00 \u2502 6 0 2 75.0 \u2502\n\u2502 TOTAL \u2502 77 \u2502 0.22 \u2502 54.774 \u2502 5.48 \u2502 22:12:00 \u2502 67 0 10 87.0 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n LEFT OPEN TRADES REPORT \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Pair \u2503 Trades \u2503 Avg Profit % \u2503 Tot Profit USDT \u2503 Tot Profit % \u2503 Avg Duration \u2503 Win Draw Loss Win% \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 BTC/USDT:USDT \u2502 1 \u2502 -4.14 \u2502 -9.930 \u2502 -0.99 \u2502 17 days, 8:00:00 \u2502 0 0 1 0 \u2502\n\u2502 ETC/USDT:USDT \u2502 1 \u2502 -4.24 \u2502 -15.365 \u2502 -1.54 \u2502 10:40:00 \u2502 0 0 1 0 \u2502\n\u2502 DOT/USDT:USDT \u2502 1 \u2502 -5.29 \u2502 -19.125 \u2502 -1.91 \u2502 11:30:00 \u2502 0 0 1 0 \u2502\n\u2502 TOTAL \u2502 3 \u2502 -4.56 \u2502 -44.420 \u2502 -4.44 \u2502 6 days, 2:03:00 \u2502 0 0 3 0 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n ENTER TAG STATS \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Enter Tag \u2503 Entries \u2503 Avg Profit % \u2503 Tot Profit USDT \u2503 Tot Profit % \u2503 Avg Duration \u2503 Win Draw Loss Win% \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 OTHER \u2502 77 \u2502 0.22 \u2502 54.774 \u2502 5.48 \u2502 22:12:00 \u2502 67 0 10 87.0 \u2502\n\u2502 TOTAL \u2502 77 \u2502 0.22 \u2502 54.774 \u2502 5.48 \u2502 22:12:00 \u2502 67 0 10 87.0 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n EXIT REASON STATS \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Exit Reason \u2503 Exits \u2503 Avg Profit % \u2503 Tot Profit USDT \u2503 Tot Profit % \u2503 Avg Duration \u2503 Win Draw Loss Win% \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 roi \u2502 67 \u2502 1.05 \u2502 242.179 \u2502 24.22 \u2502 15:49:00 \u2502 67 0 0 100 \u2502\n\u2502 exit_signal \u2502 4 \u2502 -2.23 \u2502 -31.217 \u2502 -3.12 \u2502 1 day, 8:38:00 \u2502 0 0 4 0 \u2502\n\u2502 force_exit \u2502 3 \u2502 -4.56 \u2502 -44.420 \u2502 -4.44 \u2502 6 days, 2:03:00 \u2502 0 0 3 0 \u2502\n\u2502 stop_loss \u2502 3 \u2502 -10.14 \u2502 -111.768 \u2502 -11.18 \u2502 1 day, 3:05:00 \u2502 0 0 3 0 \u2502\n\u2502 TOTAL \u2502 77 \u2502 0.22 \u2502 54.774 \u2502 5.48 \u2502 22:12:00 \u2502 67 0 10 87.0 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n MIXED TAG STATS \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Enter Tag \u2503 Exit Reason \u2503 Trades \u2503 Avg Profit % \u2503 Tot Profit USDT \u2503 Tot Profit % \u2503 Avg Duration \u2503 Win Draw Loss Win% \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 \u2502 roi \u2502 67 \u2502 1.05 \u2502 242.179 \u2502 24.22 \u2502 15:49:00 \u2502 67 0 0 100 \u2502\n\u2502 \u2502 exit_signal \u2502 4 \u2502 -2.23 \u2502 -31.217 \u2502 -3.12 \u2502 1 day, 8:38:00 \u2502 0 0 4 0 \u2502\n\u2502 \u2502 force_exit \u2502 3 \u2502 -4.56 \u2502 -44.420 \u2502 -4.44 \u2502 6 days, 2:03:00 \u2502 0 0 3 0 \u2502\n\u2502 \u2502 stop_loss \u2502 3 \u2502 -10.14 \u2502 -111.768 \u2502 -11.18 \u2502 1 day, 3:05:00 \u2502 0 0 3 0 \u2502\n\u2502 TOTAL \u2502 \u2502 77 \u2502 0.22 \u2502 54.774 \u2502 5.48 \u2502 22:12:00 \u2502 67 0 10 87.0 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n SUMMARY METRICS \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Metric \u2503 Value \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 Backtesting from \u2502 2025-07-01 00:00:00 \u2502\n\u2502 Backtesting to \u2502 2025-08-01 00:00:00 \u2502\n\u2502 Trading Mode \u2502 Isolated Futures \u2502\n\u2502 Max open trades \u2502 3 \u2502\n\u2502 \u2502 \u2502\n\u2502 Total/Daily Avg Trades \u2502 77 / 2.48 \u2502\n\u2502 Starting balance \u2502 1000 USDT \u2502\n\u2502 Final balance \u2502 1054.774 USDT \u2502\n\u2502 Absolute profit \u2502 54.774 USDT \u2502\n\u2502 Total profit % \u2502 5.48% \u2502\n\u2502 CAGR % \u2502 87.36% \u2502\n\u2502 Sortino \u2502 2.48 \u2502\n\u2502 Sharpe \u2502 3.75 \u2502\n\u2502 Calmar \u2502 40.99 \u2502\n\u2502 SQN \u2502 0.69 \u2502\n\u2502 Profit factor \u2502 1.29 \u2502\n\u2502 Expectancy (Ratio) \u2502 0.71 (0.04) \u2502\n\u2502 Avg. daily profit \u2502 1.767 USDT \u2502\n\u2502 Avg. stake amount \u2502 345.016 USDT \u2502\n\u2502 Total trade volume \u2502 53316.954 USDT \u2502\n\u2502 \u2502 \u2502\n\u2502 Long / Short trades \u2502 67 / 10 \u2502\n\u2502 Long / Short profit % \u2502 8.94% / -3.47% \u2502\n\u2502 Long / Short profit USDT \u2502 89.425 / -34.651 \u2502\n\u2502 \u2502 \u2502\n\u2502 Best Pair \u2502 LTC/USDT:USDT 5.62% \u2502\n\u2502 Worst Pair \u2502 ADA/USDT:USDT -5.21% \u2502\n\u2502 Best trade \u2502 ETC/USDT:USDT 2.00% \u2502\n\u2502 Worst trade \u2502 ADA/USDT:USDT -10.17% \u2502\n\u2502 Best day \u2502 26.91 USDT \u2502\n\u2502 Worst day \u2502 -47.741 USDT \u2502\n\u2502 Days win/draw/lose \u2502 20 / 6 / 5 \u2502\n\u2502 Min/Max/Avg. Duration Winners \u2502 0d 00:35 / 5d 18:15 / 0d 15:49 \u2502\n\u2502 Min/Max/Avg. Duration Losers \u2502 0d 10:40 / 17d 08:00 / 2d 17:00 \u2502\n\u2502 Max Consecutive Wins / Loss \u2502 36 / 3 \u2502\n\u2502 Rejected Entry signals \u2502 258 \u2502\n\u2502 Entry/Exit Timeouts \u2502 0 / 0 \u2502\n\u2502 \u2502 \u2502\n\u2502 Min balance \u2502 1003.168 USDT \u2502\n\u2502 Max balance \u2502 1149.421 USDT \u2502\n\u2502 Max % of account underwater \u2502 8.23% \u2502\n\u2502 Absolute drawdown \u2502 94.647 USDT (8.23%) \u2502\n\u2502 Drawdown duration \u2502 9 days 08:50:00 \u2502\n\u2502 Profit at drawdown start \u2502 149.421 USDT \u2502\n\u2502 Profit at drawdown end \u2502 54.774 USDT \u2502\n\u2502 Drawdown start \u2502 2025-07-22 15:10:00 \u2502\n\u2502 Drawdown end \u2502 2025-08-01 00:00:00 \u2502\n\u2502 Market change \u2502 30.51% \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n\nBacktested 2025-07-01 00:00:00 -> 2025-08-01 00:00:00 | Max open trades : 3\n STRATEGY SUMMARY \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Strategy \u2503 Trades \u2503 Avg Profit % \u2503 Tot Profit USDT \u2503 Tot Profit % \u2503 Avg Duration \u2503 Win Draw Loss Win% \u2503 Drawdown \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 SampleStrategy \u2502 77 \u2502 0.22 \u2502 54.774 \u2502 5.48 \u2502 22:12:00 \u2502 67 0 10 87.0 \u2502 94.647 USDT 8.23% \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\nThe first table contains all trades the bot made, including \"left open trades\".
The last line will give you the overall performance of your strategy, here:
\u2502 TOTAL \u2502 77 \u2502 0.22 \u2502 54.774 \u2502 5.48 \u2502 22:12:00 \u2502 67 0 10 87.0 \u2502\nThe bot has made 77 trades for an average duration of 22:12:00, with a performance of 5.48% (profit), that means it has earned a total of 54.774 USDT starting with a capital of 1000 USDT.
The column Avg Profit % shows the average profit for all trades made. The column Tot Profit % shows instead the total profit % in relation to the starting balance.
In the above results, we have a starting balance of 1000 USDT and an absolute profit of 54.774 USDT - so the Tot Profit % will be (54.774 / 1000) * 100 ~= 5.48%.
Your strategy performance is influenced by your entry strategy, your exit strategy, and also by the minimal_roi and stop_loss you have set.
For example, if your minimal_roi is only \"0\": 0.01 you cannot expect the bot to make more profit than 1% (because it will exit every time a trade reaches 1%).
\"minimal_roi\": {\n \"0\": 0.01\n},\nOn the other hand, if you set a too high minimal_roi like \"0\": 0.55 (55%), there is almost no chance that the bot will ever reach this profit. Hence, keep in mind that your performance is an integral mix of all different elements of the strategy, your configuration, and the crypto-currency pairs you have set up.
The second table contains all trades the bot had to force_exit at the end of the backtesting period to present you the full picture. This is necessary to simulate realistic behavior, since the backtest period has to end at some point, while realistically, you could leave the bot running forever. These trades are also included in the first table, but are also shown separately in this table for clarity.
The third table provides a breakdown of trades by their entry tags (e.g., enter_long, enter_short), showing the number of entries, average profit percentage, total profit in the stake currency, total profit percentage, average duration, and the number of wins, draws, and losses for each tag.
The fourth table contains a recap of exit reasons (e.g., exit_signal, roi, stop_loss, force_exit). This table can tell you which area needs additional work (e.g., if many exit_signal trades are losses, you should work on improving the exit signal or consider disabling it).
The fifth table combines entry tags and exit reasons, providing a detailed view of how different entry tags performed with specific exit reasons. This can help identify which combinations of entry and exit strategies are most effective.
"},{"location":"backtesting/#summary-metrics","title":"Summary metrics","text":"The last element of the backtest report is the summary metrics table. It contains key metrics about the performance of your strategy on backtesting data.
\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Metric \u2503 Value \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 Backtesting from \u2502 2025-07-01 00:00:00 \u2502\n\u2502 Backtesting to \u2502 2025-08-01 00:00:00 \u2502\n\u2502 Trading Mode \u2502 Isolated Futures \u2502\n\u2502 Max open trades \u2502 3 \u2502\n\u2502 \u2502 \u2502\n\u2502 Total/Daily Avg Trades \u2502 72 / 2.32 \u2502\n\u2502 Starting balance \u2502 1000 USDT \u2502\n\u2502 Final balance \u2502 1106.734 USDT \u2502\n\u2502 Absolute profit \u2502 106.734 USDT \u2502\n\u2502 Total profit % \u2502 10.67% \u2502\n\u2502 CAGR % \u2502 230.04% \u2502\n\u2502 Sortino \u2502 4.99 \u2502\n\u2502 Sharpe \u2502 8.00 \u2502\n\u2502 Calmar \u2502 77.76 \u2502\n\u2502 SQN \u2502 1.52 \u2502\n\u2502 Profit factor \u2502 1.79 \u2502\n\u2502 Expectancy (Ratio) \u2502 1.48 (0.07) \u2502\n\u2502 Avg. daily profit \u2502 3.443 USDT \u2502\n\u2502 Avg. stake amount \u2502 363.133 USDT \u2502\n\u2502 Total trade volume \u2502 52466.174 USDT \u2502\n\u2502 \u2502 \u2502\n\u2502 Best Pair \u2502 LTC/USDT:USDT 4.48% \u2502\n\u2502 Worst Pair \u2502 ADA/USDT:USDT -1.78% \u2502\n\u2502 Best trade \u2502 ETC/USDT:USDT 2.00% \u2502\n\u2502 Worst trade \u2502 ADA/USDT:USDT -10.17% \u2502\n\u2502 Best day \u2502 23.535 USDT \u2502\n\u2502 Worst day \u2502 -49.813 USDT \u2502\n\u2502 Days win/draw/lose \u2502 21 / 6 / 4 \u2502\n\u2502 Min/Max/Avg. Duration Winners \u2502 0d 00:35 / 5d 18:15 / 0d 15:30 \u2502\n\u2502 Min/Max/Avg. Duration Losers \u2502 0d 12:00 / 17d 08:00 / 3d 23:28 \u2502\n\u2502 Max Consecutive Wins / Loss \u2502 58 / 4 \u2502\n\u2502 Rejected Entry signals \u2502 254 \u2502\n\u2502 Entry/Exit Timeouts \u2502 0 / 0 \u2502\n\u2502 \u2502 \u2502\n\u2502 Min balance \u2502 1003.168 USDT \u2502\n\u2502 Max balance \u2502 1209 USDT \u2502\n\u2502 Max % of account underwater \u2502 8.46% \u2502\n\u2502 Absolute drawdown \u2502 102.266 USDT (8.46%) \u2502\n\u2502 Drawdown duration \u2502 9 days 08:50:00 \u2502\n\u2502 Profit at drawdown start \u2502 209 USDT \u2502\n\u2502 Profit at drawdown end \u2502 106.734 USDT \u2502\n\u2502 Drawdown start \u2502 2025-07-22 15:10:00 \u2502\n\u2502 Drawdown end \u2502 2025-08-01 00:00:00 \u2502\n\u2502 Market change \u2502 30.51% \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\nBacktesting from / Backtesting to: Backtesting range (usually defined with the --timerange option).Trading Mode: Spot or Futures trading.Max open trades: Setting of max_open_trades (or --max-open-trades) - or number of pairs in the pairlist (whatever is lower).Total/Daily Avg Trades: Identical to the total trades of the backtest output table / Total trades divided by the backtesting duration in days (this will give you information about how many trades to expect from the strategy).Starting balance: Start balance - as given by dry-run-wallet (config or command line).Final balance: Final balance - starting balance + absolute profit.Absolute profit: Profit made in stake currency.Total profit %: Total profit. Aligned to the TOTAL row's Tot Profit % from the first table. Calculated as (End capital \u2212 Starting capital) / Starting capital.CAGR %: Compound annual growth rate.Sortino: Annualized Sortino ratio.Sharpe: Annualized Sharpe ratio.Calmar: Annualized Calmar ratio.SQN: System Quality Number (SQN) - by Van Tharp.Profit factor: Sum of the profits of all winning trades divided by the sum of the losses of all losing trades.Expectancy (Ratio): Expectancy ratio, which is the average profit or loss per trade. A negative expectancy ratio means that your strategy is not profitable.Avg. daily profit: Average profit per day, calculated as (Total Profit / Backtest Days).Avg. stake amount: Average stake amount, either stake_amount or the average when using dynamic stake amount.Total trade volume: Volume generated on the exchange to reach the above profit.Long / Short trades: Split long/short trade counts (only shown when short trades were made).Long / Short profit %: Profit percentage for long and short trades (only shown when short trades were made).Long / Short profit USDT: Profit in stake currency for long and short trades (only shown when short trades were made).Best Pair / Worst Pair: Best and worst performing pair (based on total profit percentage), and its corresponding Tot Profit %.Best trade / Worst trade: Biggest single winning trade and biggest single losing trade.Best day / Worst day: Best and worst day based on daily profit.Days win/draw/lose: Winning / Losing days (draws are usually days without closed trades).Min/Max/Avg. Duration Winners: Minimum, maximum, and average durations for winning trades.Min/Max/Avg. Duration Losers: Minimum, maximum, and average durations for losing trades.Max Consecutive Wins / Loss: Maximum consecutive wins/losses in a row.Rejected Entry signals: Trade entry signals that could not be acted upon due to max_open_trades being reached.Entry/Exit Timeouts: Entry/exit orders which did not fill (only applicable if custom pricing is used).Min balance / Max balance: Lowest and Highest Wallet balance during the backtest period.Max % of account underwater: Maximum percentage your account has decreased from the top since the simulation started. Calculated as the maximum of (Max Balance - Current Balance) / (Max Balance).Absolute drawdown: Maximum absolute drawdown experienced, including percentage relative to the account calculated as (Absolute Drawdown) / (DrawdownHigh + startingBalance)..Drawdown duration: Duration of the largest drawdown period.Profit at drawdown start / Profit at drawdown end: Profit at the beginning and end of the largest drawdown period.Drawdown start / Drawdown end: Start and end datetime for the largest drawdown (can also be visualized via the plot-dataframe sub-command).Market change: Change of the market during the backtest period. Calculated as the average of all pairs' changes from the first to the last candle using the \"close\" column.You can get an overview over daily, weekly, monthly, or yearly results by using the --breakdown <> switch.
To visualize monthly and yearly breakdowns, you can use the following:
freqtrade backtesting --strategy MyAwesomeStrategy --breakdown month year\n MONTH BREAKDOWN\n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Month \u2503 Trades \u2503 Tot Profit USDT \u2503 Profit Factor \u2503 Win Draw Loss Win% \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 31/01/2020 \u2502 12 \u2502 44.451 \u2502 7.28 \u2502 10 0 2 83.3 \u2502\n\u2502 29/02/2020 \u2502 30 \u2502 45.41 \u2502 2.36 \u2502 17 0 13 56.7 \u2502\n\u2502 31/03/2020 \u2502 35 \u2502 142.024 \u2502 2.42 \u2502 14 0 21 40.0 \u2502\n\u2502 30/04/2020 \u2502 67 \u2502 -23.692 \u2502 0.81 \u2502 24 0 43 35.8 \u2502\n...\n...\n\u2502 30/04/2025 \u2502 203 \u2502 -63.43 \u2502 0.81 \u2502 73 0 130 36.0 \u2502\n\u2502 31/05/2025 \u2502 142 \u2502 104.675 \u2502 1.28 \u2502 59 0 83 41.5 \u2502\n\u2502 30/06/2025 \u2502 177 \u2502 -1.014 \u2502 1.0 \u2502 85 0 92 48.0 \u2502\n\u2502 31/07/2025 \u2502 155 \u2502 232.762 \u2502 1.6 \u2502 63 0 92 40.6 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n YEAR BREAKDOWN\n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Year \u2503 Trades \u2503 Tot Profit USDT \u2503 Profit Factor \u2503 Win Draw Loss Win% \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 31/12/2020 \u2502 896 \u2502 868.889 \u2502 1.46 \u2502 351 0 545 39.2 \u2502\n\u2502 31/12/2021 \u2502 1778 \u2502 4487.163 \u2502 1.93 \u2502 745 0 1033 41.9 \u2502\n\u2502 31/12/2022 \u2502 1736 \u2502 938.27 \u2502 1.27 \u2502 698 0 1038 40.2 \u2502\n\u2502 31/12/2023 \u2502 1712 \u2502 1677.126 \u2502 1.68 \u2502 670 0 1042 39.1 \u2502\n\u2502 31/12/2024 \u2502 1609 \u2502 3198.424 \u2502 2.22 \u2502 773 0 836 48.0 \u2502\n\u2502 31/12/2025 \u2502 1042 \u2502 716.174 \u2502 1.33 \u2502 420 0 622 40.3 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\nThe output will display tables containing the realized absolute profit (in stake currency) for the selected period, along with additional statistics such as number of trades, profit factor, and distribution of wins, draws, and losses that materialized (closed) on this period.
"},{"location":"backtesting/#backtest-result-caching","title":"Backtest result caching","text":"To save time, by default backtest will reuse a cached result from within the last day when the backtested strategy and config match that of a previous backtest. To force a new backtest despite existing result for an identical run specify --cache none parameter.
Warning
Caching is automatically disabled for open-ended timeranges (--timerange 20210101-), as freqtrade cannot ensure reliably that the underlying data didn't change. It can also use cached results where it shouldn't if the original backtest had missing data at the end, which was fixed by downloading more data. In this instance, please use --cache none once to force a fresh backtest.
To further analyze your backtest results, freqtrade will export the trades to file by default. You can then load the trades to perform further analysis as shown in the data analysis backtesting section.
Also, you can use freqtrade in webserver mode to visualize the backtest results in a web interface. This mode also allows you to load existing backtest results, so you can analyze them without running the backtest again. For this mode - --notes \"<notes>\" can be used to add notes to the backtest results, which will be shown in the web interface.
The output file freqtrade produces is a zip file containing the following files:
This will ensure results are reproducible - under the assumption that the same data is available.
Only the strategy file and the config file are included in the zip file, eventual dependencies are not included.
"},{"location":"backtesting/#assumptions-made-by-backtesting","title":"Assumptions made by backtesting","text":"Since backtesting lacks some detailed information about what happens within a candle, it needs to take a few assumptions:
120: 0.02 for 1h candles, from 60: 0.05) will use the candle's open as exit rate<N>=-1 ROI entries use low as exit value, unless N falls on the candle open (e.g. 120: -1 for 1h candles)2 * fees higher than the stoploss pricestoploss exit reason comparing to the results obtained with the same strategy in the Dry Run/Live Trade modesstop_positive_offset) is assumed (instead of high) - and the stop is calculated from this point. This rule is NOT applicable to custom-stoploss scenarios, since there's no information about the stoploss logic available.Taking these assumptions, backtesting tries to mirror real trading as closely as possible. However, backtesting will never replace running a strategy in dry-run mode. Also, keep in mind that past results don't guarantee future success.
In addition to the above assumptions, strategy authors should carefully read the Common Mistakes section, to avoid using data in backtesting which is not available in real market conditions.
"},{"location":"backtesting/#trading-limits-in-backtesting","title":"Trading limits in backtesting","text":"Exchanges have certain trading limits, like minimum (and maximum) base currency, or minimum/maximum stake (quote) currency. These limits are usually listed in the exchange documentation as \"trading rules\" or similar and can be quite different between different pairs.
Backtesting (as well as live and dry-run) does honor these limits, and will ensure that a stoploss can be placed below this value - so the value will be slightly higher than what the exchange specifies. Freqtrade has however no information about historic limits.
This can lead to situations where trading-limits are inflated by using a historic price, resulting in minimum amounts > 50$.
For example:
BTC minimum tradable amount is 0.001. BTC trades at 22.000$ today (0.001 BTC is related to this) - but the backtesting period includes prices as high as 50.000$. Today's minimum would be 0.001 * 22_000 - or 22$. However the limit could also be 50$ - based on 0.001 * 50_000 in some historic setting.
Most exchanges pose precision limits on both price and amounts, so you cannot buy 1.0020401 of a pair, or at a price of 1.24567123123. Instead, these prices and amounts will be rounded or truncated (based on the exchange definition) to the defined trading precision. The above values may for example be rounded to an amount of 1.002, and a price of 1.24567.
These precision values are based on current exchange limits (as described in the above section), as historic precision limits are not available.
"},{"location":"backtesting/#improved-backtest-accuracy","title":"Improved backtest accuracy","text":"One big limitation of backtesting is it's inability to know how prices moved intra-candle (was high before close, or vice-versa?). So assuming you run backtesting with a 1h timeframe, there will be 4 prices for that candle (Open, High, Low, Close).
While backtesting does take some assumptions (read above) about this - this can never be perfect, and will always be biased in one way or the other. To mitigate this, freqtrade can use a lower (faster) timeframe to simulate intra-candle movements.
To utilize this, you can append --timeframe-detail 5m to your regular backtesting command.
freqtrade backtesting --strategy AwesomeStrategy --timeframe 1h --timeframe-detail 5m\nThis will load 1h data (the main timeframe) as well as 5m data (detail timeframe) for the selected timerange. The strategy will be analyzed with the 1h timeframe. Candles where activity may take place (there's an active signal, the pair is in a trade) are evaluated at the 5m timeframe. This will allow for a more accurate simulation of intra-candle movements - and can lead to different results, especially on higher timeframes.
Entries will generally still happen at the main candle's open, however freed trade slots may be freed earlier (if the exit signal is triggered on the 5m candle), which can then be used for a new trade of a different pair.
All callback functions (custom_exit(), custom_stoploss(), ... ) will be running for each 5m candle once the trade is opened (so 12 times in the above example of 1h timeframe, and 5m detailed timeframe).
--timeframe-detail must be smaller than the original timeframe, otherwise backtesting will fail to start.
Obviously this will require more memory (5m data is bigger than 1h data), and will also impact runtime (depending on the amount of trades and trade durations). Also, data must be available / downloaded already.
Tip
You can use this function as the last part of strategy development, to ensure your strategy is not exploiting one of the backtesting assumptions. Strategies that perform similarly well with this mode have a good chance to perform well in dry/live modes too (although only forward-testing (dry-mode) can really confirm a strategy).
Extreme Difference ExampleUsing --timeframe-detail on an extreme example (all below pairs have the 10:00 candle with an entry signal) may lead to the following backtesting Trade sequence with 1 max_open_trades:
Without timeframe-detail, this would look like:
Pair Entry Time Exit Time Duration BTC/USDT 2024-01-01 10:00:00 2021-01-01 11:00:00 1h BTC/USDT 2024-01-01 11:00:00 2021-01-01 12:00:00 1hThe difference is significant, as without detail data, only the first max_open_trades signals per candle are evaluated, and the trade slots are only freed at the end of the candle, allowing for a new trade to be opened at the next candle.
To compare multiple strategies, a list of Strategies can be provided to backtesting.
This is limited to 1 timeframe value per run. However, data is only loaded once from disk so if you have multiple strategies you'd like to compare, this will give a nice runtime boost.
All listed Strategies need to be in the same directory, unless also --recursive-strategy-search is specified, where sub-directories within the strategy directory are also considered.
freqtrade backtesting --timerange 20180401-20180410 --timeframe 5m --strategy-list Strategy001 Strategy002 --export trades\nThis will save the results to user_data/backtest_results/backtest-result-<datetime>.json, including results for both Strategy001 and Strategy002. There will be an additional table comparing win/losses of the different strategies (identical to the \"Total\" row in the first table). Detailed output for all strategies one after the other will be available, so make sure to scroll up to see the details per strategy.
================================================== STRATEGY SUMMARY ===================================================================\n| Strategy | Trades | Avg Profit % | Tot Profit BTC | Tot Profit % | Avg Duration | Wins | Draws | Losses | Drawdown % |\n|-------------+---------+----------------+------------------+----------------+----------------+-------+--------+--------+------------|\n| Strategy1 | 429 | 0.36 | 0.00762792 | 76.20 | 4:12:00 | 186 | 0 | 243 | 45.2 |\n| Strategy2 | 1487 | -0.13 | -0.00988917 | -98.79 | 4:43:00 | 662 | 0 | 825 | 241.68 |\nGreat, your strategy is profitable. What if the bot can give you the optimal parameters to use for your strategy? Your next step is to learn how to find optimal parameters with Hyperopt
"},{"location":"bot-basics/","title":"Freqtrade basics","text":"This page provides you some basic concepts on how Freqtrade works and operates.
"},{"location":"bot-basics/#freqtrade-terminology","title":"Freqtrade terminology","text":"XRP/USDT for spot, XRP/USDT:USDT for futures).\"5m\", \"1h\", ...).All profit calculations of Freqtrade include fees. For Backtesting / Hyperopt / Dry-run modes, the exchange default fee is used (lowest tier on the exchange). For live operations, fees are used as applied by the exchange (this includes BNB rebates etc.).
"},{"location":"bot-basics/#pair-naming","title":"Pair naming","text":"Freqtrade follows the ccxt naming convention for currencies. Using the wrong naming convention in the wrong market will usually result in the bot not recognizing the pair, usually resulting in errors like \"this pair is not available\".
"},{"location":"bot-basics/#spot-pair-naming","title":"Spot pair naming","text":"For spot pairs, naming will be base/quote (e.g. ETH/USDT).
For futures pairs, naming will be base/quote:settle (e.g. ETH/USDT:USDT).
Starting freqtrade in dry-run or live mode (using freqtrade trade) will start the bot and start the bot iteration loop. This will also run the bot_start() callback.
By default, the bot loop runs every few seconds (internals.process_throttle_secs) and performs the following actions:
bot_loop_start() strategy callback.populate_indicators()populate_entry_trend()populate_exit_trend()order_filled() strategy callback for filled orders.check_entry_timeout() strategy callback for open entry orders.check_exit_timeout() strategy callback for open exit orders.adjust_order_price() strategy callback for open orders.adjust_entry_price() strategy callback for open entry orders. only called when adjust_order_price() is not implementedadjust_exit_price() strategy callback for open exit orders. only called when adjust_order_price() is not implementedcustom_exit() and custom_stoploss().exit_pricing configuration setting or by using the custom_exit_price() callback.confirm_trade_exit() strategy callback is called.adjust_trade_position() and place additional order if required.max_open_trades is reached).entry_pricing configuration setting, or by using the custom_entry_price() callback.leverage() strategy callback is called to determine the desired leverage.custom_stake_amount() callback.confirm_trade_entry() strategy callback is called.This loop will be repeated again and again until the bot is stopped.
"},{"location":"bot-basics/#backtesting-hyperopt-execution-logic","title":"Backtesting / Hyperopt execution logic","text":"backtesting or hyperopt do only part of the above logic, since most of the trading operations are fully simulated.
bot_start() once.populate_indicators() once per pair).populate_entry_trend() and populate_exit_trend() once per pair).bot_loop_start() strategy callback.unfilledtimeout configuration, or via check_entry_timeout() / check_exit_timeout() strategy callbacks.adjust_order_price() strategy callback for open orders.adjust_entry_price() strategy callback for open entry orders. only called when adjust_order_price() is not implemented!adjust_exit_price() strategy callback for open exit orders. only called when adjust_order_price() is not implemented!enter_long / enter_short columns).confirm_trade_entry() and confirm_trade_exit() if implemented in the strategy).custom_entry_price() (if implemented in the strategy) to determine entry price (Prices are moved to be within the opening candle).leverage() strategy callback is called to determine the desired leverage.custom_stake_amount() callback.adjust_trade_position() to determine if an additional order is requested.order_filled() strategy callback for filled entry orders.custom_stoploss() and custom_exit() to find custom exit points.custom_exit_price() to determine exit price (Prices are moved to be within the closing candle).order_filled() strategy callback for filled exit orders.Note
Both Backtesting and Hyperopt include exchange default Fees in the calculation. Custom fees can be passed to backtesting / hyperopt by specifying the --fee argument.
Callback call frequency
Backtesting will call each callback at max. once per candle (--timeframe-detail modifies this behavior to once per detailed candle). Most callbacks will be called once per iteration in live (usually every ~5s) - which can cause backtesting mismatches.
This page explains the different parameters of the bot and how to run it.
Note
If you've used setup.sh, don't forget to activate your virtual environment (source .venv/bin/activate) before running freqtrade commands.
Up-to-date clock
The clock on the system running the bot must be accurate, synchronized to a NTP server frequently enough to avoid problems with communication to the exchanges.
"},{"location":"bot-usage/#bot-commands","title":"Bot commands","text":"usage: freqtrade [-h] [-V]\n {trade,create-userdir,new-config,show-config,new-strategy,download-data,convert-data,convert-trade-data,trades-to-ohlcv,list-data,backtesting,backtesting-show,backtesting-analysis,edge,hyperopt,hyperopt-list,hyperopt-show,list-exchanges,list-markets,list-pairs,list-strategies,list-hyperoptloss,list-freqaimodels,list-timeframes,show-trades,test-pairlist,convert-db,install-ui,plot-dataframe,plot-profit,webserver,strategy-updater,lookahead-analysis,recursive-analysis}\n ...\n\nFree, open source crypto trading bot\n\npositional arguments:\n {trade,create-userdir,new-config,show-config,new-strategy,download-data,convert-data,convert-trade-data,trades-to-ohlcv,list-data,backtesting,backtesting-show,backtesting-analysis,edge,hyperopt,hyperopt-list,hyperopt-show,list-exchanges,list-markets,list-pairs,list-strategies,list-hyperoptloss,list-freqaimodels,list-timeframes,show-trades,test-pairlist,convert-db,install-ui,plot-dataframe,plot-profit,webserver,strategy-updater,lookahead-analysis,recursive-analysis}\n trade Trade module.\n create-userdir Create user-data directory.\n new-config Create new config\n show-config Show resolved config\n new-strategy Create new strategy\n download-data Download backtesting data.\n convert-data Convert candle (OHLCV) data from one format to\n another.\n convert-trade-data Convert trade data from one format to another.\n trades-to-ohlcv Convert trade data to OHLCV data.\n list-data List downloaded data.\n backtesting Backtesting module.\n backtesting-show Show past Backtest results\n backtesting-analysis\n Backtest Analysis module.\n edge Edge module. No longer part of Freqtrade\n hyperopt Hyperopt module.\n hyperopt-list List Hyperopt results\n hyperopt-show Show details of Hyperopt results\n list-exchanges Print available exchanges.\n list-markets Print markets on exchange.\n list-pairs Print pairs on exchange.\n list-strategies Print available strategies.\n list-hyperoptloss Print available hyperopt loss functions.\n list-freqaimodels Print available freqAI models.\n list-timeframes Print available timeframes for the exchange.\n show-trades Show trades.\n test-pairlist Test your pairlist configuration.\n convert-db Migrate database to different system\n install-ui Install FreqUI\n plot-dataframe Plot candles with indicators.\n plot-profit Generate plot showing profits.\n webserver Webserver module.\n strategy-updater updates outdated strategy files to the current version\n lookahead-analysis Check for potential look ahead bias.\n recursive-analysis Check for potential recursive formula issue.\n\noptions:\n -h, --help show this help message and exit\n -V, --version show program's version number and exit\nusage: freqtrade trade [-h] [-v] [--no-color] [--logfile FILE] [-V] [-c PATH]\n [-d PATH] [--userdir PATH] [-s NAME]\n [--strategy-path PATH] [--recursive-strategy-search]\n [--freqaimodel NAME] [--freqaimodel-path PATH]\n [--db-url PATH] [--sd-notify] [--dry-run]\n [--dry-run-wallet DRY_RUN_WALLET] [--fee FLOAT]\n\noptions:\n -h, --help show this help message and exit\n --db-url PATH Override trades database URL, this is useful in custom\n deployments (default: `sqlite:///tradesv3.sqlite` for\n Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for\n Dry Run).\n --sd-notify Notify systemd service manager.\n --dry-run Enforce dry-run for trading (removes Exchange secrets\n and simulates trades).\n --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET\n Starting balance, used for backtesting / hyperopt and\n dry-runs.\n --fee FLOAT Specify fee ratio. Will be applied twice (on trade\n entry and exit).\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n\nStrategy arguments:\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n --freqaimodel NAME Specify a custom freqaimodels.\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\nThe bot allows you to select which configuration file you want to use by means of the -c/--config command line option:
freqtrade trade -c path/far/far/away/config.json\nPer default, the bot loads the config.json configuration file from the current working directory.
The bot allows you to use multiple configuration files by specifying multiple -c/--config options in the command line. Configuration parameters defined in the latter configuration files override parameters with the same name defined in the previous configuration files specified in the command line earlier.
For example, you can make a separate configuration file with your key and secret for the Exchange you use for trading, specify default configuration file with empty key and secret values while running in the Dry Mode (which does not actually require them):
freqtrade trade -c ./config.json\nand specify both configuration files when running in the normal Live Trade Mode:
freqtrade trade -c ./config.json -c path/to/secrets/keys.config.json\nThis could help you hide your private Exchange key and Exchange secret on you local machine by setting appropriate file permissions for the file which contains actual secrets and, additionally, prevent unintended disclosure of sensitive private data when you publish examples of your configuration in the project issues or in the Internet.
See more details on this technique with examples in the documentation page on configuration.
"},{"location":"bot-usage/#where-to-store-custom-data","title":"Where to store custom data","text":"Freqtrade allows the creation of a user-data directory using freqtrade create-userdir --userdir someDirectory. This directory will look as follows:
user_data/\n\u251c\u2500\u2500 backtest_results\n\u251c\u2500\u2500 data\n\u251c\u2500\u2500 hyperopts\n\u251c\u2500\u2500 hyperopt_results\n\u251c\u2500\u2500 plot\n\u2514\u2500\u2500 strategies\nYou can add the entry \"user_data_dir\" setting to your configuration, to always point your bot to this directory. Alternatively, pass in --userdir to every command. The bot will fail to start if the directory does not exist, but will create necessary subdirectories.
This directory should contain your custom strategies, custom hyperopts and hyperopt loss functions, backtesting historical data (downloaded using either backtesting command or the download script) and plot outputs.
It is recommended to use version control to keep track of changes to your strategies.
"},{"location":"bot-usage/#how-to-use-strategy","title":"How to use --strategy?","text":"This parameter will allow you to load your custom strategy class. To test the bot installation, you can use the SampleStrategy installed by the create-userdir subcommand (usually user_data/strategy/sample_strategy.py).
The bot will search your strategy file within user_data/strategies. To use other directories, please read the next section about --strategy-path.
To load a strategy, simply pass the class name (e.g.: CustomStrategy) in this parameter.
Example: In user_data/strategies you have a file my_awesome_strategy.py which has a strategy class called AwesomeStrategy to load it:
freqtrade trade --strategy AwesomeStrategy\nIf the bot does not find your strategy file, it will display in an error message the reason (File not found, or errors in your code).
Learn more about strategy file in Strategy Customization.
"},{"location":"bot-usage/#how-to-use-strategy-path","title":"How to use --strategy-path?","text":"This parameter allows you to add an additional strategy lookup path, which gets checked before the default locations (The passed path must be a directory!):
freqtrade trade --strategy AwesomeStrategy --strategy-path /some/directory\nThis is very simple. Copy paste your strategy file into the directory user_data/strategies or use --strategy-path. And voila, the bot is ready to use it.
When you run the bot in Dry-run mode, per default no transactions are stored in a database. If you want to store your bot actions in a DB using --db-url. This can also be used to specify a custom database in production mode. Example command:
freqtrade trade -c config.json --db-url sqlite:///tradesv3.dry_run.sqlite\nThe optimal strategy of the bot will change with time depending of the market trends. The next step is to Strategy Customization.
"},{"location":"configuration/","title":"Configure the bot","text":"Freqtrade has many configurable features and possibilities. By default, these settings are configured via the configuration file (see below).
"},{"location":"configuration/#the-freqtrade-configuration-file","title":"The Freqtrade configuration file","text":"The bot uses a set of configuration parameters during its operation that all together conform to the bot configuration. It normally reads its configuration from a file (Freqtrade configuration file).
Per default, the bot loads the configuration from the config.json file, located in the current working directory.
You can specify a different configuration file used by the bot with the -c/--config command-line option.
If you used the Quick start method for installing the bot, the installation script should have already created the default configuration file (config.json) for you.
If the default configuration file is not created we recommend to use freqtrade new-config --config user_data/config.json to generate a basic configuration file.
The Freqtrade configuration file is to be written in JSON format.
Additionally to the standard JSON syntax, you may use one-line // ... and multi-line /* ... */ comments in your configuration files and trailing commas in the lists of parameters.
Do not worry if you are not familiar with JSON format -- simply open the configuration file with an editor of your choice, make some changes to the parameters you need, save your changes and, finally, restart the bot or, if it was previously stopped, run it again with the changes you made to the configuration. The bot validates the syntax of the configuration file at startup and will warn you if you made any errors editing it, pointing out problematic lines.
"},{"location":"configuration/#environment-variables","title":"Environment variables","text":"Set options in the Freqtrade configuration via environment variables. This takes priority over the corresponding value in configuration or strategy.
Environment variables must be prefixed with FREQTRADE__ to be loaded to the freqtrade configuration.
__ serves as level separator, so the format used should correspond to FREQTRADE__{section}__{key}. As such - an environment variable defined as export FREQTRADE__STAKE_AMOUNT=200 would result in {stake_amount: 200}.
A more complex example might be export FREQTRADE__EXCHANGE__KEY=<yourExchangeKey> to keep your exchange key secret. This will move the value to the exchange.key section of the configuration. Using this scheme, all configuration settings will also be available as environment variables.
Please note that Environment variables will overwrite corresponding settings in your configuration, but command line Arguments will always win.
Common example:
FREQTRADE__TELEGRAM__CHAT_ID=<telegramchatid>\nFREQTRADE__TELEGRAM__TOKEN=<telegramToken>\nFREQTRADE__EXCHANGE__KEY=<yourExchangeKey>\nFREQTRADE__EXCHANGE__SECRET=<yourExchangeSecret>\nJson lists are parsed as json - so you can use the following to set a list of pairs:
export FREQTRADE__EXCHANGE__PAIR_WHITELIST='[\"BTC/USDT\", \"ETH/USDT\"]'\nNote
Environment variables detected are logged at startup - so if you can't find why a value is not what you think it should be based on the configuration, make sure it's not loaded from an environment variable.
Validate combined result
You can use the show-config subcommand to see the final, combined configuration.
Loading sequenceEnvironment variables are loaded after the initial configuration. As such, you cannot provide the path to the configuration through environment variables. Please use --config path/to/config.json for that. This also applies to user_dir to some degree. while the user directory can be set through environment variables - the configuration will not be loaded from that location.
Multiple configuration files can be specified and used by the bot or the bot can read its configuration parameters from the process standard input stream.
You can specify additional configuration files in add_config_files. Files specified in this parameter will be loaded and merged with the initial config file. The files are resolved relative to the initial configuration file. This is similar to using multiple --config parameters, but simpler in usage as you don't have to specify all files for all commands.
Validate combined result
You can use the show-config subcommand to see the final, combined configuration.
Use multiple configuration files to keep secrets secret
You can use a 2nd configuration file containing your secrets. That way you can share your \"primary\" configuration file, while still keeping your API keys for yourself. The 2nd file should only specify what you intend to override. If a key is in more than one of the configurations, then the \"last specified configuration\" wins (in the above example, config-private.json).
For one-off commands, you can also use the below syntax by specifying multiple \"--config\" parameters.
freqtrade trade --config user_data/config1.json --config user_data/config-private.json <...>\nThe below is equivalent to the example above - but having 2 configuration files in the configuration, for easier reuse.
user_data/config.json\"add_config_files\": [\n \"config1.json\",\n \"config-private.json\"\n]\nfreqtrade trade --config user_data/config.json <...>\nIf the same configuration setting takes place in both config.json and config-import.json, then the parent configuration wins. In the below case, max_open_trades would be 3 after the merging - as the reusable \"import\" configuration has this key overwritten.
{\n \"max_open_trades\": 3,\n \"stake_currency\": \"USDT\",\n \"add_config_files\": [\n \"config-import.json\"\n ]\n}\n{\n \"max_open_trades\": 10,\n \"stake_amount\": \"unlimited\",\n}\nResulting combined configuration:
Result{\n \"max_open_trades\": 3,\n \"stake_currency\": \"USDT\",\n \"stake_amount\": \"unlimited\"\n}\nIf multiple files are in the add_config_files section, then they will be assumed to be at identical levels, having the last occurrence override the earlier config (unless a parent already defined such a key).
If you are using an editor that supports JSON schema, you can use the schema provided by Freqtrade to get autocompletion and validation of your configuration file by adding the following line to the top of your configuration file:
{\n \"$schema\": \"https://schema.freqtrade.io/schema.json\",\n}\nThe develop schema is available as https://schema.freqtrade.io/schema_dev.json - though we recommend to stick to the stable version for the best experience.
The table below will list all configuration parameters available.
Freqtrade can also load many options via command line (CLI) arguments (check out the commands --help output for details).
The prevalence for all Options is as follows:
Mandatory parameters are marked as Required, which means that they are required to be set in one of the possible ways.
Parameter Descriptionmax_open_trades Required. Number of open trades your bot is allowed to have. Only one open trade per pair is possible, so the length of your pairlist is another limitation that can apply. If -1 then it is ignored (i.e. potentially unlimited open trades, limited by the pairlist). More information below. Strategy Override. Datatype: Positive integer or -1. stake_currency Required. Crypto-currency used for trading. Datatype: String stake_amount Required. Amount of crypto-currency your bot will use for each trade. Set it to \"unlimited\" to allow the bot to use all available balance. More information below. Datatype: Positive float or \"unlimited\". tradable_balance_ratio Ratio of the total account balance the bot is allowed to trade. More information below. Defaults to 0.99 99%). Datatype: Positive float between 0.1 and 1.0. available_capital Available starting capital for the bot. Useful when running multiple bots on the same exchange account. More information below. Datatype: Positive float. amend_last_stake_amount Use reduced last stake amount if necessary. More information below. Defaults to false. Datatype: Boolean last_stake_amount_min_ratio Defines minimum stake amount that has to be left and executed. Applies only to the last stake amount when it's amended to a reduced value (i.e. if amend_last_stake_amount is set to true). More information below. Defaults to 0.5. Datatype: Float (as ratio) amount_reserve_percent Reserve some amount in min pair stake amount. The bot will reserve amount_reserve_percent + stoploss value when calculating min pair stake amount in order to avoid possible trade refusals. Defaults to 0.05 (5%). Datatype: Positive Float as ratio. timeframe The timeframe to use (e.g 1m, 5m, 15m, 30m, 1h ...). Usually missing in configuration, and specified in the strategy. Strategy Override. Datatype: String fiat_display_currency Fiat currency used to show your profits. More information below. Datatype: String dry_run Required. Define if the bot must be in Dry Run or production mode. Defaults to true. Datatype: Boolean dry_run_wallet Define the starting amount in stake currency for the simulated wallet used by the bot running in Dry Run mode. More information belowDefaults to 1000. Datatype: Float or Dict cancel_open_orders_on_exit Cancel open orders when the /stop RPC command is issued, Ctrl+C is pressed or the bot dies unexpectedly. When set to true, this allows you to use /stop to cancel unfilled and partially filled orders in the event of a market crash. It does not impact open positions. Defaults to false. Datatype: Boolean process_only_new_candles Enable processing of indicators only when new candles arrive. If false each loop populates the indicators, this will mean the same candle is processed many times creating system load but can be useful of your strategy depends on tick data not only candle. Strategy Override. Defaults to true. Datatype: Boolean minimal_roi Required. Set the threshold as ratio the bot will use to exit a trade. More information below. Strategy Override. Datatype: Dict stoploss Required. Value as ratio of the stoploss used by the bot. More details in the stoploss documentation. Strategy Override. Datatype: Float (as ratio) trailing_stop Enables trailing stoploss (based on stoploss in either configuration or strategy file). More details in the stoploss documentation. Strategy Override. Datatype: Boolean trailing_stop_positive Changes stoploss once profit has been reached. More details in the stoploss documentation. Strategy Override. Datatype: Float trailing_stop_positive_offset Offset on when to apply trailing_stop_positive. Percentage value which should be positive. More details in the stoploss documentation. Strategy Override. Defaults to 0.0 (no offset). Datatype: Float trailing_only_offset_is_reached Only apply trailing stoploss when the offset is reached. stoploss documentation. Strategy Override. Defaults to false. Datatype: Boolean fee Fee used during backtesting / dry-runs. Should normally not be configured, which has freqtrade fall back to the exchange default fee. Set as ratio (e.g. 0.001 = 0.1%). Fee is applied twice for each trade, once when buying, once when selling. Datatype: Float (as ratio) futures_funding_rate User-specified funding rate to be used when historical funding rates are not available from the exchange. This does not overwrite real historical rates. It is recommended that this be set to 0 unless you are testing a specific coin and you understand how the funding rate will affect freqtrade's profit calculations. More information here Defaults to None. Datatype: Float trading_mode Specifies if you want to trade regularly, trade with leverage, or trade contracts whose prices are derived from matching cryptocurrency prices. leverage documentation. Defaults to \"spot\". Datatype: String margin_mode When trading with leverage, this determines if the collateral owned by the trader will be shared or isolated to each trading pair leverage documentation. Datatype: String liquidation_buffer A ratio specifying how large of a safety net to place between the liquidation price and the stoploss to prevent a position from reaching the liquidation price leverage documentation. Defaults to 0.05. Datatype: Float Unfilled timeout unfilledtimeout.entry Required. How long (in minutes or seconds) the bot will wait for an unfilled entry order to complete, after which the order will be cancelled. Strategy Override. Datatype: Integer unfilledtimeout.exit Required. How long (in minutes or seconds) the bot will wait for an unfilled exit order to complete, after which the order will be cancelled and repeated at current (new) price, as long as there is a signal. Strategy Override. Datatype: Integer unfilledtimeout.unit Unit to use in unfilledtimeout setting. Note: If you set unfilledtimeout.unit to \"seconds\", \"internals.process_throttle_secs\" must be inferior or equal to timeout Strategy Override. Defaults to \"minutes\". Datatype: String unfilledtimeout.exit_timeout_count How many times can exit orders time out. Once this number of timeouts is reached, an emergency exit is triggered. 0 to disable and allow unlimited order cancels. Strategy Override.Defaults to 0. Datatype: Integer Pricing entry_pricing.price_side Select the side of the spread the bot should look at to get the entry rate. More information below. Defaults to \"same\". Datatype: String (either ask, bid, same or other). entry_pricing.price_last_balance Required. Interpolate the bidding price. More information below. entry_pricing.use_order_book Enable entering using the rates in Order Book Entry. Defaults to true. Datatype: Boolean entry_pricing.order_book_top Bot will use the top N rate in Order Book \"price_side\" to enter a trade. I.e. a value of 2 will allow the bot to pick the 2nd entry in Order Book Entry. Defaults to 1. Datatype: Positive Integer entry_pricing. check_depth_of_market.enabled Do not enter if the difference of buy orders and sell orders is met in Order Book. Check market depth. Defaults to false. Datatype: Boolean entry_pricing. check_depth_of_market.bids_to_ask_delta The difference ratio of buy orders and sell orders found in Order Book. A value below 1 means sell order size is greater, while value greater than 1 means buy order size is higher. Check market depth Defaults to 0. Datatype: Float (as ratio) exit_pricing.price_side Select the side of the spread the bot should look at to get the exit rate. More information below. Defaults to \"same\". Datatype: String (either ask, bid, same or other). exit_pricing.price_last_balance Interpolate the exiting price. More information below. exit_pricing.use_order_book Enable exiting of open trades using Order Book Exit. Defaults to true. Datatype: Boolean exit_pricing.order_book_top Bot will use the top N rate in Order Book \"price_side\" to exit. I.e. a value of 2 will allow the bot to pick the 2nd ask rate in Order Book ExitDefaults to 1. Datatype: Positive Integer custom_price_max_distance_ratio Configure maximum distance ratio between current and custom entry or exit price. Defaults to 0.02 2%). Datatype: Positive float Order/Signal handling use_exit_signal Use exit signals produced by the strategy in addition to the minimal_roi. Setting this to false disables the usage of \"exit_long\" and \"exit_short\" columns. Has no influence on other exit methods (Stoploss, ROI, callbacks). Strategy Override. Defaults to true. Datatype: Boolean exit_profit_only Wait until the bot reaches exit_profit_offset before taking an exit decision. Strategy Override. Defaults to false. Datatype: Boolean exit_profit_offset Exit-signal is only active above this value. Only active in combination with exit_profit_only=True. Strategy Override. Defaults to 0.0. Datatype: Float (as ratio) ignore_roi_if_entry_signal Do not exit if the entry signal is still active. This setting takes preference over minimal_roi and use_exit_signal. Strategy Override. Defaults to false. Datatype: Boolean ignore_buying_expired_candle_after Specifies the number of seconds until a buy signal is no longer used. Datatype: Integer order_types Configure order-types depending on the action (\"entry\", \"exit\", \"stoploss\", \"stoploss_on_exchange\"). More information below. Strategy Override. Datatype: Dict order_time_in_force Configure time in force for entry and exit orders. More information below. Strategy Override. Datatype: Dict position_adjustment_enable Enables the strategy to use position adjustments (additional buys or sells). More information here. Strategy Override. Defaults to false. Datatype: Boolean max_entry_position_adjustment Maximum additional order(s) for each open trade on top of the first entry Order. Set it to -1 for unlimited additional orders. More information here. Strategy Override. Defaults to -1. Datatype: Positive Integer or -1 Exchange exchange.name Required. Name of the exchange class to use. Datatype: String exchange.key API key to use for the exchange. Only required when you are in production mode.Keep it in secret, do not disclose publicly. Datatype: String exchange.secret API secret to use for the exchange. Only required when you are in production mode.Keep it in secret, do not disclose publicly. Datatype: String exchange.password API password to use for the exchange. Only required when you are in production mode and for exchanges that use password for API requests.Keep it in secret, do not disclose publicly. Datatype: String exchange.uid API uid to use for the exchange. Only required when you are in production mode and for exchanges that use uid for API requests.Keep it in secret, do not disclose publicly. Datatype: String exchange.pair_whitelist List of pairs to use by the bot for trading and to check for potential trades during backtesting. Supports regex pairs as .*/BTC. Not used by VolumePairList. More information. Datatype: List exchange.pair_blacklist List of pairs the bot must absolutely avoid for trading and backtesting. More information. Datatype: List exchange.ccxt_config Additional CCXT parameters passed to both ccxt instances (sync and async). This is usually the correct place for additional ccxt configurations. Parameters may differ from exchange to exchange and are documented in the ccxt documentation. Please avoid adding exchange secrets here (use the dedicated fields instead), as they may be contained in logs. Datatype: Dict exchange.ccxt_sync_config Additional CCXT parameters passed to the regular (sync) ccxt instance. Parameters may differ from exchange to exchange and are documented in the ccxt documentation Datatype: Dict exchange.ccxt_async_config Additional CCXT parameters passed to the async ccxt instance. Parameters may differ from exchange to exchange and are documented in the ccxt documentation Datatype: Dict exchange.enable_ws Enable the usage of Websockets for the exchange. More information.Defaults to true. Datatype: Boolean exchange.markets_refresh_interval The interval in minutes in which markets are reloaded. Defaults to 60 minutes. Datatype: Positive Integer exchange.skip_open_order_update Skips open order updates on startup should the exchange cause problems. Only relevant in live conditions.Defaults to false Datatype: Boolean exchange.unknown_fee_rate Fallback value to use when calculating trading fees. This can be useful for exchanges which have fees in non-tradable currencies. The value provided here will be multiplied with the \"fee cost\".Defaults to None Datatype:* float exchange.log_responses Log relevant exchange responses. For debug mode only - use with care.Defaults to false Datatype: Boolean exchange.only_from_ccxt Prevent data-download from data.binance.vision. Leaving this as false can greatly speed up downloads, but may be problematic if the site is not available.Defaults to false Datatype: Boolean experimental.block_bad_exchanges Block exchanges known to not work with freqtrade. Leave on default unless you want to test if that exchange works now. Defaults to true. Datatype: Boolean Plugins pairlists Define one or more pairlists to be used. More information. Defaults to StaticPairList. Datatype: List of Dicts Telegram telegram.enabled Enable the usage of Telegram. Datatype: Boolean telegram.token Your Telegram bot token. Only required if telegram.enabled is true. Keep it in secret, do not disclose publicly. Datatype: String telegram.chat_id Your personal Telegram account id. Only required if telegram.enabled is true. Keep it in secret, do not disclose publicly. Datatype: String telegram.balance_dust_level Dust-level (in stake currency) - currencies with a balance below this will not be shown by /balance. Datatype: float telegram.reload Allow \"reload\" buttons on telegram messages. Defaults to true. Datatype:* boolean telegram.notification_settings.* Detailed notification settings. Refer to the telegram documentation for details. Datatype: dictionary telegram.allow_custom_messages Enable the sending of Telegram messages from strategies via the dataprovider.send_msg() function. Datatype: Boolean Webhook webhook.enabled Enable usage of Webhook notifications Datatype: Boolean webhook.url URL for the webhook. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.entry Payload to send on entry. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.entry_cancel Payload to send on entry order cancel. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.entry_fill Payload to send on entry order filled. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.exit Payload to send on exit. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.exit_cancel Payload to send on exit order cancel. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.exit_fill Payload to send on exit order filled. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.status Payload to send on status calls. Only required if webhook.enabled is true. See the webhook documentation for more details. Datatype: String webhook.allow_custom_messages Enable the sending of Webhook messages from strategies via the dataprovider.send_msg() function. Datatype: Boolean Rest API / FreqUI / Producer-Consumer api_server.enabled Enable usage of API Server. See the API Server documentation for more details. Datatype: Boolean api_server.listen_ip_address Bind IP address. See the API Server documentation for more details. Datatype: IPv4 api_server.listen_port Bind Port. See the API Server documentation for more details. Datatype: Integer between 1024 and 65535 api_server.verbosity Logging verbosity. info will print all RPC Calls, while \"error\" will only display errors. Datatype: Enum, either info or error. Defaults to info. api_server.username Username for API server. See the API Server documentation for more details. Keep it in secret, do not disclose publicly. Datatype: String api_server.password Password for API server. See the API Server documentation for more details. Keep it in secret, do not disclose publicly. Datatype: String api_server.ws_token API token for the Message WebSocket. See the API Server documentation for more details. Keep it in secret, do not disclose publicly. Datatype: String bot_name Name of the bot. Passed via API to a client - can be shown to distinguish / name bots. Defaults to freqtrade Datatype: String external_message_consumer Enable Producer/Consumer mode for more details. Datatype: Dict Other initial_state Defines the initial application state. If set to stopped, then the bot has to be explicitly started via /start RPC command. Defaults to stopped. Datatype: Enum, either running, paused or stopped force_entry_enable Enables the RPC Commands to force a Trade entry. More information below. Datatype: Boolean disable_dataframe_checks Disable checking the OHLCV dataframe returned from the strategy methods for correctness. Only use when intentionally changing the dataframe and understand what you are doing. Strategy Override. Defaults to False. Datatype: Boolean internals.process_throttle_secs Set the process throttle, or minimum loop duration for one bot iteration loop. Value in second. Defaults to 5 seconds. Datatype: Positive Integer internals.heartbeat_interval Print heartbeat message every N seconds. Set to 0 to disable heartbeat messages. Defaults to 60 seconds. Datatype: Positive Integer or 0 internals.sd_notify Enables use of the sd_notify protocol to tell systemd service manager about changes in the bot state and issue keep-alive pings. See here for more details. Datatype: Boolean strategy Required Defines Strategy class to use. Recommended to be set via --strategy NAME. Datatype: ClassName strategy_path Adds an additional strategy lookup path (must be a directory). Datatype: String recursive_strategy_search Set to true to recursively search sub-directories inside user_data/strategies for a strategy. Datatype: Boolean user_data_dir Directory containing user data. Defaults to ./user_data/. Datatype: String db_url Declares database URL to use. NOTE: This defaults to sqlite:///tradesv3.dryrun.sqlite if dry_run is true, and to sqlite:///tradesv3.sqlite for production instances. Datatype: String, SQLAlchemy connect string logfile Specifies logfile name. Uses a rolling strategy for log file rotation for 10 files with the 1MB limit per file. Datatype: String add_config_files Additional config files. These files will be loaded and merged with the current config file. The files are resolved relative to the initial file. Defaults to []. Datatype: List of strings dataformat_ohlcv Data format to use to store historical candle (OHLCV) data. Defaults to feather. Datatype: String dataformat_trades Data format to use to store historical trades data. Defaults to feather. Datatype: String reduce_df_footprint Recast all numeric columns to float32/int32, with the objective of reducing ram/disk usage (and decreasing train/inference timing backtesting/hyperopt and in FreqAI). Datatype: Boolean. Default: False. log_config Dictionary containing the log config for python logging. more info Datatype: dict. Default: FtRichHandler"},{"location":"configuration/#parameters-in-the-strategy","title":"Parameters in the strategy","text":"The following parameters can be set in the configuration file or strategy. Values set in the configuration file always overwrite values set in the strategy.
minimal_roitimeframestoplossmax_open_tradestrailing_stoptrailing_stop_positivetrailing_stop_positive_offsettrailing_only_offset_is_reacheduse_custom_stoplossprocess_only_new_candlesorder_typesorder_time_in_forceunfilledtimeoutdisable_dataframe_checksuse_exit_signalexit_profit_onlyexit_profit_offsetignore_roi_if_entry_signalignore_buying_expired_candle_afterposition_adjustment_enablemax_entry_position_adjustmentThere are several methods to configure how much of the stake currency the bot will use to enter a trade. All methods respect the available balance configuration as explained below.
"},{"location":"configuration/#minimum-trade-stake","title":"Minimum trade stake","text":"The minimum stake amount will depend on exchange and pair and is usually listed in the exchange support pages.
Assuming the minimum tradable amount for XRP/USD is 20 XRP (given by the exchange), and the price is 0.6$, the minimum stake amount to buy this pair is 20 * 0.6 ~= 12. This exchange has also a limit on USD - where all orders must be > 10$ - which however does not apply in this case.
To guarantee safe execution, freqtrade will not allow buying with a stake-amount of 10.1$, instead, it'll make sure that there's enough space to place a stoploss below the pair (+ an offset, defined by amount_reserve_percent, which defaults to 5%).
With a reserve of 5%, the minimum stake amount would be ~12.6$ (12 * (1 + 0.05)). If we take into account a stoploss of 10% on top of that - we'd end up with a value of ~14$ (12.6 / (1 - 0.1)).
To limit this calculation in case of large stoploss values, the calculated minimum stake-limit will never be more than 50% above the real limit.
Warning
Since the limits on exchanges are usually stable and are not updated often, some pairs can show pretty high minimum limits, simply because the price increased a lot since the last limit adjustment by the exchange. Freqtrade adjusts the stake-amount to this value, unless it's > 30% more than the calculated/desired stake-amount - in which case the trade is rejected.
"},{"location":"configuration/#dry-run-wallet","title":"Dry-run wallet","text":"When running in dry-run mode, the bot will use a simulated wallet to execute trades. The starting balance of this wallet is defined by dry_run_wallet (defaults to 1000). For more complex scenarios, you can also assign a dictionary to dry_run_wallet to define the starting balance for each currency.
\"dry_run_wallet\": {\n \"BTC\": 0.01,\n \"ETH\": 2,\n \"USDT\": 1000\n}\nCommand line options (--dry-run-wallet) can be used to override the configuration value, but only for the float value, not for the dictionary. If you'd like to use the dictionary, please adjust the configuration file.
Note
Balances not in stake-currency will not be used for trading, but are shown as part of the wallet balance. On Cross-margin exchanges, the wallet balance may be used to calculate the available collateral for trading.
"},{"location":"configuration/#tradable-balance","title":"Tradable balance","text":"By default, the bot assumes that the complete amount - 1% is at it's disposal, and when using dynamic stake amount, it will split the complete balance into max_open_trades buckets per trade. Freqtrade will reserve 1% for eventual fees when entering a trade and will therefore not touch that by default.
You can configure the \"untouched\" amount by using the tradable_balance_ratio setting.
For example, if you have 10 ETH available in your wallet on the exchange and tradable_balance_ratio=0.5 (which is 50%), then the bot will use a maximum amount of 5 ETH for trading and considers this as an available balance. The rest of the wallet is untouched by the trades.
Danger
This setting should not be used when running multiple bots on the same account. Please look at Available Capital to the bot instead.
Warning
The tradable_balance_ratio setting applies to the current balance (free balance + tied up in trades). Therefore, assuming the starting balance of 1000, a configuration with tradable_balance_ratio=0.99 will not guarantee that 10 currency units will always remain available on the exchange. For example, the free amount may reduce to 5 units if the total balance is reduced to 500 (either by a losing streak or by withdrawing balance).
To fully utilize compounding profits when using multiple bots on the same exchange account, you'll want to limit each bot to a certain starting balance. This can be accomplished by setting available_capital to the desired starting balance.
Assuming your account has 10000 USDT and you want to run 2 different strategies on this exchange. You'd set available_capital=5000 - granting each bot an initial capital of 5000 USDT. The bot will then split this starting balance equally into max_open_trades buckets. Profitable trades will result in increased stake-sizes for this bot - without affecting the stake-sizes of the other bot.
Adjusting available_capital requires reloading the configuration to take effect. Adjusting the available_capital adds the difference between the previous available_capital and the new available_capital. Decreasing the available capital when trades are open doesn't exit the trades. The difference is returned to the wallet when the trades conclude. The outcome of this differs depending on the price movement between the adjustment and exiting the trades.
Incompatible with tradable_balance_ratio
Setting this option will replace any configuration of tradable_balance_ratio.
Assuming we have the tradable balance of 1000 USDT, stake_amount=400, and max_open_trades=3. The bot would open 2 trades and will be unable to fill the last trading slot, since the requested 400 USDT are no longer available since 800 USDT are already tied in other trades.
To overcome this, the option amend_last_stake_amount can be set to True, which will enable the bot to reduce stake_amount to the available balance to fill the last trade slot.
In the example above this would mean:
Note
This option only applies with Static stake amount - since Dynamic stake amount divides the balances evenly.
Note
The minimum last stake amount can be configured using last_stake_amount_min_ratio - which defaults to 0.5 (50%). This means that the minimum stake amount that's ever used is stake_amount * 0.5. This avoids very low stake amounts, that are close to the minimum tradable amount for the pair and can be refused by the exchange.
The stake_amount configuration statically configures the amount of stake-currency your bot will use for each trade.
The minimal configuration value is 0.0001, however, please check your exchange's trading minimums for the stake currency you're using to avoid problems.
This setting works in combination with max_open_trades. The maximum capital engaged in trades is stake_amount * max_open_trades. For example, the bot will at most use (0.05 BTC x 3) = 0.15 BTC, assuming a configuration of max_open_trades=3 and stake_amount=0.05.
Note
This setting respects the available balance configuration.
"},{"location":"configuration/#dynamic-stake-amount","title":"Dynamic stake amount","text":"Alternatively, you can use a dynamic stake amount, which will use the available balance on the exchange, and divide that equally by the number of allowed trades (max_open_trades).
To configure this, set stake_amount=\"unlimited\". We also recommend to set tradable_balance_ratio=0.99 (99%) - to keep a minimum balance for eventual fees.
In this case a trade amount is calculated as:
currency_balance / (max_open_trades - current_open_trades)\nTo allow the bot to trade all the available stake_currency in your account (minus tradable_balance_ratio) set
\"stake_amount\" : \"unlimited\",\n\"tradable_balance_ratio\": 0.99,\nCompounding profits
This configuration will allow increasing/decreasing stakes depending on the performance of the bot (lower stake if the bot is losing, higher stakes if the bot has a winning record since higher balances are available), and will result in profit compounding.
When using Dry-Run Mode
When using \"stake_amount\" : \"unlimited\", in combination with Dry-Run, Backtesting or Hyperopt, the balance will be simulated starting with a stake of dry_run_wallet which will evolve. It is therefore important to set dry_run_wallet to a sensible value (like 0.05 or 0.01 for BTC and 1000 or 100 for USDT, for example), otherwise, it may simulate trades with 100 BTC (or more) or 0.05 USDT (or less) at once - which may not correspond to your real available balance or is less than the exchange minimal limit for the order amount for the stake currency.
When you want to use position adjustment with unlimited stakes, you must also implement custom_stake_amount to a return a value depending on your strategy. Typical value would be in the range of 25% - 50% of the proposed stakes, but depends highly on your strategy and how much you wish to leave into the wallet as position adjustment buffer.
For example if your position adjustment assumes it can do 2 additional buys with the same stake amounts then your buffer should be 66.6667% of the initially proposed unlimited stake amount.
Or another example if your position adjustment assumes it can do 1 additional buy with 3x the original stake amount then custom_stake_amount should return 25% of proposed stake amount and leave 75% for possible later position adjustments.
Prices for regular orders can be controlled via the parameter structures entry_pricing for trade entries and exit_pricing for trade exits. Prices are always retrieved right before an order is placed, either by querying the exchange tickers or by using the orderbook data.
Note
Orderbook data used by Freqtrade are the data retrieved from exchange by the ccxt's function fetch_order_book(), i.e. are usually data from the L2-aggregated orderbook, while the ticker data are the structures returned by the ccxt's fetch_ticker()/fetch_tickers() functions. Refer to the ccxt library documentation for more details.
Using market orders
Please read the section Market order pricing section when using market orders.
"},{"location":"configuration/#entry-price","title":"Entry price","text":""},{"location":"configuration/#enter-price-side","title":"Enter price side","text":"The configuration setting entry_pricing.price_side defines the side of the orderbook the bot looks for when buying.
The following displays an orderbook.
...\n103\n102\n101 # ask\n-------------Current spread\n99 # bid\n98\n97\n...\nIf entry_pricing.price_side is set to \"bid\", then the bot will use 99 as entry price. In line with that, if entry_pricing.price_side is set to \"ask\", then the bot will use 101 as entry price.
Depending on the order direction (long/short), this will lead to different results. Therefore we recommend to use \"same\" or \"other\" for this configuration instead. This would result in the following pricing matrix:
Using the other side of the orderbook often guarantees quicker filled orders, but the bot can also end up paying more than what would have been necessary. Taker fees instead of maker fees will most likely apply even when using limit buy orders. Also, prices at the \"other\" side of the spread are higher than prices at the \"bid\" side in the orderbook, so the order behaves similar to a market order (however with a maximum price).
"},{"location":"configuration/#entry-price-with-orderbook-enabled","title":"Entry price with Orderbook enabled","text":"When entering a trade with the orderbook enabled (entry_pricing.use_order_book=True), Freqtrade fetches the entry_pricing.order_book_top entries from the orderbook and uses the entry specified as entry_pricing.order_book_top on the configured side (entry_pricing.price_side) of the orderbook. 1 specifies the topmost entry in the orderbook, while 2 would use the 2nd entry in the orderbook, and so on.
The following section uses side as the configured entry_pricing.price_side (defaults to \"same\").
When not using orderbook (entry_pricing.use_order_book=False), Freqtrade uses the best side price from the ticker if it's below the last traded price from the ticker. Otherwise (when the side price is above the last price), it calculates a rate between side and last price based on entry_pricing.price_last_balance.
The entry_pricing.price_last_balance configuration parameter controls this. A value of 0.0 will use side price, while 1.0 will use the last price and values between those interpolate between ask and last price.
When check depth of market is enabled (entry_pricing.check_depth_of_market.enabled=True), the entry signals are filtered based on the orderbook depth (sum of all amounts) for each orderbook side.
Orderbook bid (buy) side depth is then divided by the orderbook ask (sell) side depth and the resulting delta is compared to the value of the entry_pricing.check_depth_of_market.bids_to_ask_delta parameter. The entry order is only executed if the orderbook delta is greater than or equal to the configured delta value.
Note
A delta value below 1 means that ask (sell) orderbook side depth is greater than the depth of the bid (buy) orderbook side, while a value greater than 1 means opposite (depth of the buy side is higher than the depth of the sell side).
The configuration setting exit_pricing.price_side defines the side of the spread the bot looks for when exiting a trade.
The following displays an orderbook:
...\n103\n102\n101 # ask\n-------------Current spread\n99 # bid\n98\n97\n...\nIf exit_pricing.price_side is set to \"ask\", then the bot will use 101 as exiting price. In line with that, if exit_pricing.price_side is set to \"bid\", then the bot will use 99 as exiting price.
Depending on the order direction (long/short), this will lead to different results. Therefore we recommend to use \"same\" or \"other\" for this configuration instead. This would result in the following pricing matrix:
When exiting with the orderbook enabled (exit_pricing.use_order_book=True), Freqtrade fetches the exit_pricing.order_book_top entries in the orderbook and uses the entry specified as exit_pricing.order_book_top from the configured side (exit_pricing.price_side) as trade exit price.
1 specifies the topmost entry in the orderbook, while 2 would use the 2nd entry in the orderbook, and so on.
"},{"location":"configuration/#exit-price-without-orderbook-enabled","title":"Exit price without Orderbook enabled","text":"The following section uses side as the configured exit_pricing.price_side (defaults to \"ask\").
When not using orderbook (exit_pricing.use_order_book=False), Freqtrade uses the best side price from the ticker if it's above the last traded price from the ticker. Otherwise (when the side price is below the last price), it calculates a rate between side and last price based on exit_pricing.price_last_balance.
The exit_pricing.price_last_balance configuration parameter controls this. A value of 0.0 will use side price, while 1.0 will use the last price and values between those interpolate between side and last price.
When using market orders, prices should be configured to use the \"correct\" side of the orderbook to allow realistic pricing detection. Assuming both entry and exits are using market orders, a configuration similar to the following must be used
\"order_types\": {\n \"entry\": \"market\",\n \"exit\": \"market\"\n // ...\n },\n \"entry_pricing\": {\n \"price_side\": \"other\",\n // ...\n },\n \"exit_pricing\":{\n \"price_side\": \"other\",\n // ...\n },\nObviously, if only one side is using limit orders, different pricing combinations can be used.
"},{"location":"configuration/#further-configuration-details","title":"Further Configuration details","text":""},{"location":"configuration/#understand-minimal_roi","title":"Understand minimal_roi","text":"The minimal_roi configuration parameter is a JSON object where the key is a duration in minutes and the value is the minimum ROI as a ratio. See the example below:
\"minimal_roi\": {\n \"40\": 0.0, # Exit after 40 minutes if the profit is not negative\n \"30\": 0.01, # Exit after 30 minutes if there is at least 1% profit\n \"20\": 0.02, # Exit after 20 minutes if there is at least 2% profit\n \"0\": 0.04 # Exit immediately if there is at least 4% profit\n},\nMost of the strategy files already include the optimal minimal_roi value. This parameter can be set in either Strategy or Configuration file. If you use it in the configuration file, it will override the minimal_roi value from the strategy file. If it is not set in either Strategy or Configuration, a default of 1000% {\"0\": 10} is used, and minimal ROI is disabled unless your trade generates 1000% profit.
Special case to forceexit after a specific time
A special case presents using \"<N>\": -1 as ROI. This forces the bot to exit a trade after N Minutes, no matter if it's positive or negative, so represents a time-limited force-exit.
The force_entry_enable configuration parameter enables the usage of force-enter (/forcelong, /forceshort) commands via Telegram and REST API. For security reasons, it's disabled by default, and freqtrade will show a warning message on startup if enabled. For example, you can send /forceenter ETH/BTC to the bot, which will result in freqtrade buying the pair and holds it until a regular exit-signal (ROI, stoploss, /forceexit) appears.
This can be dangerous with some strategies, so use with care.
See the telegram documentation for details on usage.
"},{"location":"configuration/#ignoring-expired-candles","title":"Ignoring expired candles","text":"When working with larger timeframes (for example 1h or more) and using a low max_open_trades value, the last candle can be processed as soon as a trade slot becomes available. When processing the last candle, this can lead to a situation where it may not be desirable to use the buy signal on that candle. For example, when using a condition in your strategy where you use a cross-over, that point may have passed too long ago for you to start a trade on it.
In these situations, you can enable the functionality to ignore candles that are beyond a specified period by setting ignore_buying_expired_candle_after to a positive number, indicating the number of seconds after which the buy signal becomes expired.
For example, if your strategy is using a 1h timeframe, and you only want to buy within the first 5 minutes when a new candle comes in, you can add the following configuration to your strategy:
{\n //...\n \"ignore_buying_expired_candle_after\": 300,\n // ...\n }\nNote
This setting resets with each new candle, so it will not prevent sticking-signals from executing on the 2nd or 3rd candle they're active. Best use a \"trigger\" selector for buy signals, which are only active for one candle.
"},{"location":"configuration/#understand-order_types","title":"Understand order_types","text":"The order_types configuration parameter maps actions (entry, exit, stoploss, emergency_exit, force_exit, force_entry) to order-types (market, limit, ...) as well as configures stoploss to be on the exchange and defines stoploss on exchange update interval in seconds.
This allows to enter using limit orders, exit using limit-orders, and create stoplosses using market orders. It also allows to set the stoploss \"on exchange\" which means stoploss order would be placed immediately once the buy order is fulfilled.
order_types set in the configuration file overwrites values set in the strategy as a whole, so you need to configure the whole order_types dictionary in one place.
If this is configured, the following 4 values (entry, exit, stoploss and stoploss_on_exchange) need to be present, otherwise, the bot will fail to start.
For information on (emergency_exit,force_exit, force_entry, stoploss_on_exchange,stoploss_on_exchange_interval,stoploss_on_exchange_limit_ratio) please see stop loss documentation stop loss on exchange
Syntax for Strategy:
order_types = {\n \"entry\": \"limit\",\n \"exit\": \"limit\",\n \"emergency_exit\": \"market\",\n \"force_entry\": \"market\",\n \"force_exit\": \"market\",\n \"stoploss\": \"market\",\n \"stoploss_on_exchange\": False,\n \"stoploss_on_exchange_interval\": 60,\n \"stoploss_on_exchange_limit_ratio\": 0.99,\n}\nConfiguration:
\"order_types\": {\n \"entry\": \"limit\",\n \"exit\": \"limit\",\n \"emergency_exit\": \"market\",\n \"force_entry\": \"market\",\n \"force_exit\": \"market\",\n \"stoploss\": \"market\",\n \"stoploss_on_exchange\": false,\n \"stoploss_on_exchange_interval\": 60\n}\nMarket order support
Not all exchanges support \"market\" orders. The following message will be shown if your exchange does not support market orders: \"Exchange <yourexchange> does not support market orders.\" and the bot will refuse to start.
Using market orders
Please carefully read the section Market order pricing section when using market orders.
Stoploss on exchange
order_types.stoploss_on_exchange_interval is not mandatory. Do not change its value if you are unsure of what you are doing. For more information about how stoploss works please refer to the stoploss documentation.
If order_types.stoploss_on_exchange is enabled and the stoploss is cancelled manually on the exchange, then the bot will create a new stoploss order.
Warning: order_types.stoploss_on_exchange failures
If stoploss on exchange creation fails for some reason, then an \"emergency exit\" is initiated. By default, this will exit the trade using a market order. The order-type for the emergency-exit can be changed by setting the emergency_exit value in the order_types dictionary - however, this is not advised.
The order_time_in_force configuration parameter defines the policy by which the order is executed on the exchange. Commonly used time in force are:
GTC (Good Till Canceled):
This is most of the time the default time in force. It means the order will remain on exchange till it is cancelled by the user. It can be fully or partially fulfilled. If partially fulfilled, the remaining will stay on the exchange till cancelled.
FOK (Fill Or Kill):
It means if the order is not executed immediately AND fully then it is cancelled by the exchange.
IOC (Immediate Or Canceled):
It is the same as FOK (above) except it can be partially fulfilled. The remaining part is automatically cancelled by the exchange.
PO (Post only):
Post only order. The order is either placed as a maker order, or it is canceled. This means the order must be placed on orderbook for at least time in an unfilled state.
Please check the Exchange documentation for supported time in force values for your exchange.
"},{"location":"configuration/#time_in_force-config","title":"time_in_force config","text":"The order_time_in_force parameter contains a dict with entry and exit time in force policy values. This can be set in the configuration file or in the strategy. Values set in the configuration file overwrite values from in the strategy, following the regular precedence rules.
The possible values are: GTC (default), FOK or IOC.
\"order_time_in_force\": {\n \"entry\": \"GTC\",\n \"exit\": \"GTC\"\n},\nWarning
Please don't change the default value unless you know what you are doing and have researched the impact of using different values for your particular exchange.
"},{"location":"configuration/#fiat-conversion","title":"Fiat conversion","text":"Freqtrade uses the Coingecko API to convert the coin value to it's corresponding fiat value for the Telegram reports. The FIAT currency can be set in the configuration file as fiat_display_currency.
Removing fiat_display_currency completely from the configuration will skip initializing coingecko, and will not show any FIAT currency conversion. This has no importance for the correct functioning of the bot.
The fiat_display_currency configuration parameter sets the base currency to use for the conversion from coin to fiat in the bot Telegram reports.
The valid values are:
\"AUD\", \"BRL\", \"CAD\", \"CHF\", \"CLP\", \"CNY\", \"CZK\", \"DKK\", \"EUR\", \"GBP\", \"HKD\", \"HUF\", \"IDR\", \"ILS\", \"INR\", \"JPY\", \"KRW\", \"MXN\", \"MYR\", \"NOK\", \"NZD\", \"PHP\", \"PKR\", \"PLN\", \"RUB\", \"SEK\", \"SGD\", \"THB\", \"TRY\", \"TWD\", \"ZAR\", \"USD\"\nIn addition to fiat currencies, a range of crypto currencies is supported.
The valid values are:
\"BTC\", \"ETH\", \"XRP\", \"LTC\", \"BCH\", \"BNB\"\nOn some IP ranges, coingecko is heavily rate-limiting. In such cases, you may want to add your coingecko API key to the configuration.
{\n \"fiat_display_currency\": \"USD\",\n \"coingecko\": {\n \"api_key\": \"your-api\",\n \"is_demo\": true\n }\n}\nFreqtrade supports both Demo and Pro coingecko API keys.
The Coingecko API key is NOT required for the bot to function correctly. It is only used for the conversion of coin to fiat in the Telegram reports, which usually also work without API key.
"},{"location":"configuration/#consuming-exchange-websockets","title":"Consuming exchange Websockets","text":"Freqtrade can consume websockets through ccxt.pro.
Freqtrade aims ensure data is available at all times. Should the websocket connection fail (or be disabled), the bot will fall back to REST API calls.
Should you experience problems you suspect are caused by websockets, you can disable these via the setting exchange.enable_ws, which defaults to true.
\"exchange\": {\n // ...\n \"enable_ws\": false,\n // ...\n}\nShould you be required to use a proxy, please refer to the proxy section for more information.
Rollout
We're implementing this out slowly, ensuring stability of your bots. Currently, usage is limited to ohlcv data streams. It's also limited to a few exchanges, with new exchanges being added on an ongoing basis.
"},{"location":"configuration/#using-dry-run-mode","title":"Using Dry-run mode","text":"We recommend starting the bot in the Dry-run mode to see how your bot will behave and what is the performance of your strategy. In the Dry-run mode, the bot does not engage your money. It only runs a live simulation without creating trades on the exchange.
config.json configuration file.dry-run to true and specify db_url for a persistence database.\"dry_run\": true,\n\"db_url\": \"sqlite:///tradesv3.dryrun.sqlite\",\n\"exchange\": {\n \"name\": \"binance\",\n \"key\": \"key\",\n \"secret\": \"secret\",\n ...\n}\nOnce you will be happy with your bot performance running in the Dry-run mode, you can switch it to production mode.
Note
A simulated wallet is available during dry-run mode and will assume a starting capital of dry_run_wallet (defaults to 1000).
/balance) are simulated based on dry_run_wallet.unfilledtimeout settings.stoploss_on_exchange, the stop_loss price is assumed to be filled.In production mode, the bot will engage your money. Be careful, since a wrong strategy can lose all your money. Be aware of what you are doing when you run it in production mode.
When switching to Production mode, please make sure to use a different / fresh database to avoid dry-run trades messing with your exchange money and eventually tainting your statistics.
"},{"location":"configuration/#setup-your-exchange-account","title":"Setup your exchange account","text":"You will need to create API Keys (usually you get key and secret, some exchanges require an additional password) from the Exchange website and you'll need to insert this into the appropriate fields in the configuration or when asked by the freqtrade new-config command. API Keys are usually only required for live trading (trading for real money, bot running in \"production mode\", executing real orders on the exchange) and are not required for the bot running in dry-run (trade simulation) mode. When you set up the bot in dry-run mode, you may fill these fields with empty values.
Edit your config.json file.
Switch dry-run to false and don't forget to adapt your database URL if set:
\"dry_run\": false,\nInsert your Exchange API key (change them by fake API keys):
{\n \"exchange\": {\n \"name\": \"binance\",\n \"key\": \"af8ddd35195e9dc500b9a6f799f6f5c93d89193b\",\n \"secret\": \"08a9dc6db3d7b53e1acebd9275677f4b0a04f1a5\",\n //\"password\": \"\", // Optional, not needed by all exchanges)\n // ...\n }\n //...\n}\nYou should also make sure to read the Exchanges section of the documentation to be aware of potential configuration details specific to your exchange.
Keep your secrets secret
To keep your secrets secret, we recommend using a 2nd configuration for your API keys. Simply use the above snippet in a new configuration file (e.g. config-private.json) and keep your settings in this file. You can then start the bot with freqtrade trade --config user_data/config.json --config user_data/config-private.json <...> to have your keys loaded.
NEVER share your private configuration file or your exchange keys with anyone!
"},{"location":"configuration/#using-a-proxy-with-freqtrade","title":"Using a proxy with Freqtrade","text":"To use a proxy with freqtrade, export your proxy settings using the variables \"HTTP_PROXY\" and \"HTTPS_PROXY\" set to the appropriate values. This will have the proxy settings applied to everything (telegram, coingecko, ...) except for exchange requests.
export HTTP_PROXY=\"http://addr:port\"\nexport HTTPS_PROXY=\"http://addr:port\"\nfreqtrade\nTo use a proxy for exchange connections - you will have to define the proxies as part of the ccxt configuration.
{ \n \"exchange\": {\n \"ccxt_config\": {\n \"httpsProxy\": \"http://addr:port\",\n \"wsProxy\": \"http://addr:port\",\n }\n }\n}\nFor more information on available proxy types, please consult the ccxt proxy documentation.
"},{"location":"configuration/#next-step","title":"Next step","text":"Now you have configured your config.json, the next step is to start your bot.
"},{"location":"data-analysis/","title":"Analyzing bot data with Jupyter notebooks","text":"You can analyze the results of backtests and trading history easily using Jupyter notebooks. Sample notebooks are located at user_data/notebooks/ after initializing the user directory with freqtrade create-userdir --userdir user_data.
Freqtrade provides a docker-compose file which starts up a jupyter lab server. You can run this server using the following command: docker compose -f docker/docker-compose-jupyter.yml up
This will create a dockercontainer running jupyter lab, which will be accessible using https://127.0.0.1:8888/lab. Please use the link that's printed in the console after startup for simplified login.
For more information, Please visit the Data analysis with Docker section.
"},{"location":"data-analysis/#pro-tips","title":"Pro tips","text":"Sometimes it can be desired to use a system-wide installation of Jupyter notebook, and use a jupyter kernel from the virtual environment. This prevents you from installing the full jupyter suite multiple times per system, and provides an easy way to switch between tasks (freqtrade / other analytics tasks).
For this to work, first activate your virtual environment and run the following commands:
# Activate virtual environment\nsource .venv/bin/activate\n\npip install ipykernel\nipython kernel install --user --name=freqtrade\n# Restart jupyter (lab / notebook)\n# select kernel \"freqtrade\" in the notebook\nNote
This section is provided for completeness, the Freqtrade Team won't provide full support for problems with this setup and will recommend to install Jupyter in the virtual environment directly, as that is the easiest way to get jupyter notebooks up and running. For help with this setup please refer to the Project Jupyter documentation or help channels.
Warning
Some tasks don't work especially well in notebooks. For example, anything using asynchronous execution is a problem for Jupyter. Also, freqtrade's primary entry point is the shell cli, so using pure python in a notebook bypasses arguments that provide required objects and parameters to helper functions. You may need to set those values or create expected objects manually.
"},{"location":"data-analysis/#recommended-workflow","title":"Recommended workflow","text":"Task Tool Bot operations CLI Repetitive tasks Shell scripts Data analysis & visualization NotebookUse the CLI to
* download historical data * run a backtest * run with real-time data * export results
Collect these actions in shell scripts
* save complicated commands with arguments * execute multi-step operations * automate testing strategies and preparing data for analysis
Use a notebook to
* visualize data * mangle and plot to generate insights
Jupyter notebooks execute from the notebook directory. The following snippet searches for the project root, so relative paths remain consistent.
import os\nfrom pathlib import Path\n\n# Change directory\n# Modify this cell to insure that the output shows the correct path.\n# Define all paths relative to the project root shown in the cell output\nproject_root = \"somedir/freqtrade\"\ni=0\ntry:\n os.chdir(project_root)\n assert Path('LICENSE').is_file()\nexcept:\n while i<4 and (not Path('LICENSE').is_file()):\n os.chdir(Path(Path.cwd(), '../'))\n i+=1\n project_root = Path.cwd()\nprint(Path.cwd())\nThis option can be useful to inspect the results of passing in multiple configs. This will also run through the whole Configuration initialization, so the configuration is completely initialized to be passed to other methods.
import json\nfrom freqtrade.configuration import Configuration\n\n# Load config from multiple files\nconfig = Configuration.from_files([\"config1.json\", \"config2.json\"])\n\n# Show the config in memory\nprint(json.dumps(config['original_config'], indent=2))\nFor Interactive environments, have an additional configuration specifying user_data_dir and pass this in last, so you don't have to change directories while running the bot. Best avoid relative paths, since this starts at the storage location of the jupyter notebook, unless the directory is changed.
{\n \"user_data_dir\": \"~/.freqtrade/\"\n}\nuser_data/notebooks/strategy_analysis_example.ipynb)Feel free to submit an issue or Pull Request enhancing this document if you would like to share ideas on how to best analyze the data.
"},{"location":"data-download/","title":"Data Downloading","text":""},{"location":"data-download/#getting-data-for-backtesting-and-hyperopt","title":"Getting data for backtesting and hyperopt","text":"To download data (candles / OHLCV) needed for backtesting and hyperoptimization use the freqtrade download-data command.
If no additional parameter is specified, freqtrade will download data for \"1m\" and \"5m\" timeframes for the last 30 days. Exchange and pairs will come from config.json (if specified using -c/--config). Without provided configuration, --exchange becomes mandatory.
You can use a relative timerange (--days 20) or an absolute starting point (--timerange 20200101-). For incremental downloads, the relative approach should be used.
Tip: Updating existing data
If you already have backtesting data available in your data-directory and would like to refresh this data up to today, freqtrade will automatically calculate the missing timerange for the existing pairs and the download will occur from the latest available point until \"now\", neither --days or --timerange parameters are required. Freqtrade will keep the available data and only download the missing data. If you are updating existing data after inserting new pairs that you have no data for, use the --new-pairs-days xx parameter. Specified number of days will be downloaded for new pairs while old pairs will be updated with missing data only.
usage: freqtrade download-data [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [-p PAIRS [PAIRS ...]] [--pairs-file FILE]\n [--days INT] [--new-pairs-days INT]\n [--include-inactive-pairs]\n [--no-parallel-download]\n [--timerange TIMERANGE] [--dl-trades]\n [--convert] [--exchange EXCHANGE]\n [-t TIMEFRAMES [TIMEFRAMES ...]] [--erase]\n [--data-format-ohlcv {json,jsongz,feather,parquet}]\n [--data-format-trades {json,jsongz,feather,parquet}]\n [--trading-mode {spot,margin,futures}]\n [--prepend]\n\noptions:\n -h, --help show this help message and exit\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --pairs-file FILE File containing a list of pairs. Takes precedence over\n --pairs or pairs configured in the configuration.\n --days INT Download data for given number of days.\n --new-pairs-days INT Download data of new pairs for given number of days.\n Default: `None`.\n --include-inactive-pairs\n Also download data from inactive pairs.\n --no-parallel-download\n Disable parallel startup download. Only use this if\n you experience issues.\n --timerange TIMERANGE\n Specify what timerange of data to use.\n --dl-trades Download trades instead of OHLCV data.\n --convert Convert downloaded trades to OHLCV data. Only\n applicable in combination with `--dl-trades`. Will be\n automatic for exchanges which don't have historic\n OHLCV (e.g. Kraken). If not provided, use `trades-to-\n ohlcv` to convert trades data to OHLCV data.\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\n -t TIMEFRAMES [TIMEFRAMES ...], --timeframes TIMEFRAMES [TIMEFRAMES ...]\n Specify which tickers to download. Space-separated\n list. Default: `1m 5m`.\n --erase Clean all existing data for the selected\n exchange/pairs/timeframes.\n --data-format-ohlcv {json,jsongz,feather,parquet}\n Storage format for downloaded candle (OHLCV) data.\n (default: `feather`).\n --data-format-trades {json,jsongz,feather,parquet}\n Storage format for downloaded trades data. (default:\n `feather`).\n --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}\n Select Trading mode\n --prepend Allow data prepending. (Data-appending is disabled)\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nDownloading all data for one quote currency
Often, you'll want to download data for all pairs of a specific quote-currency. In such cases, you can use the following shorthand: freqtrade download-data --exchange binance --pairs \".*/USDT\" <...>. The provided \"pairs\" string will be expanded to contain all active pairs on the exchange. To also download data for inactive (delisted) pairs, add --include-inactive-pairs to the command.
Startup period
download-data is a strategy-independent command. The idea is to download a big chunk of data once, and then iteratively increase the amount of data stored.
For that reason, download-data does not care about the \"startup-period\" defined in a strategy. It's up to the user to download additional days if the backtest should start at a specific point in time (while respecting startup period).
A very simple command (assuming an available config.json file) can look as follows.
freqtrade download-data --exchange binance\nThis will download historical candle (OHLCV) data for all the currency pairs defined in the configuration.
Alternatively, specify the pairs directly
freqtrade download-data --exchange binance --pairs ETH/USDT XRP/USDT BTC/USDT\nor as regex (in this case, to download all active USDT pairs)
freqtrade download-data --exchange binance --pairs \".*/USDT\"\n--datadir user_data/data/some_directory.--exchange <exchange> - or specify a different configuration file.pairs.json from some other directory, use --pairs-file some_other_dir/pairs.json.--days 10 (defaults to 30 days).--timerange 20200101- - which will download all data from January 1st, 2020.--timeframes to specify what timeframe download the historical candle (OHLCV) data for. Default is --timeframes 1m 5m which will download 1-minute and 5-minute data.-c/--config option. With this, the script uses the whitelist defined in the config as the list of currency pairs to download data for and does not require the pairs.json file. You can combine -c/--config with most other options.If your configuration directory user_data was made by docker, you may get the following error:
cp: cannot create regular file 'user_data/data/binance/pairs.json': Permission denied\nYou can fix the permissions of your user-data directory as follows:
sudo chown -R $UID:$GID user_data\nAssuming you downloaded all data from 2022 (--timerange 20220101-) - but you'd now like to also backtest with earlier data. You can do so by using the --prepend flag, combined with --timerange - specifying an end-date.
freqtrade download-data --exchange binance --pairs ETH/USDT XRP/USDT BTC/USDT --prepend --timerange 20210101-20220101\nNote
Freqtrade will ignore the end-date in this mode if data is available, updating the end-date to the existing data start point.
"},{"location":"data-download/#data-format","title":"Data format","text":"Freqtrade currently supports the following data-formats:
feather - a dataformat based on Apache Arrowjson - plain \"text\" json filesjsongz - a gzip-zipped version of json filesparquet - columnar datastore (OHLCV only)By default, both OHLCV data and trades data are stored in the feather format.
This can be changed via the --data-format-ohlcv and --data-format-trades command line arguments respectively. To persist this change, you should also add the following snippet to your configuration, so you don't have to insert the above arguments each time:
// ...\n \"dataformat_ohlcv\": \"feather\",\n \"dataformat_trades\": \"feather\",\n // ...\nIf the default data-format has been changed during download, then the keys dataformat_ohlcv and dataformat_trades in the configuration file need to be adjusted to the selected dataformat as well.
Note
You can convert between data-formats using the convert-data and convert-trade-data methods.
"},{"location":"data-download/#dataformat-comparison","title":"Dataformat comparison","text":"The following comparisons have been made with the following data, and by using the linux time command.
Found 6 pair / timeframe combinations.\n+----------+-------------+--------+---------------------+---------------------+\n| Pair | Timeframe | Type | From | To |\n|----------+-------------+--------+---------------------+---------------------|\n| BTC/USDT | 5m | spot | 2017-08-17 04:00:00 | 2022-09-13 19:25:00 |\n| ETH/USDT | 1m | spot | 2017-08-17 04:00:00 | 2022-09-13 19:26:00 |\n| BTC/USDT | 1m | spot | 2017-08-17 04:00:00 | 2022-09-13 19:30:00 |\n| XRP/USDT | 5m | spot | 2018-05-04 08:10:00 | 2022-09-13 19:15:00 |\n| XRP/USDT | 1m | spot | 2018-05-04 08:11:00 | 2022-09-13 19:22:00 |\n| ETH/USDT | 5m | spot | 2017-08-17 04:00:00 | 2022-09-13 19:20:00 |\n+----------+-------------+--------+---------------------+---------------------+\nTimings have been taken in a not very scientific way with the following command, which forces reading the data into memory.
time freqtrade list-data --show-timerange --data-format-ohlcv <dataformat>\nfeather 72Mb 3.5s json 149Mb 25.6s jsongz 39Mb 27s parquet 83Mb 3.8s Size has been taken from the BTC/USDT 1m spot combination for the timerange specified above.
To have a best performance/size mix, we recommend using the default feather format, or parquet.
"},{"location":"data-download/#pairs-file","title":"Pairs file","text":"In alternative to the whitelist from config.json, a pairs.json file can be used. If you are using Binance for example:
user_data/data/binance and copy or create the pairs.json file in that directory.pairs.json file to contain the currency pairs you are interested in.mkdir -p user_data/data/binance\ntouch user_data/data/binance/pairs.json\nThe format of the pairs.json file is a simple json list. Mixing different stake-currencies is allowed for this file, since it's only used for downloading.
[\n \"ETH/BTC\",\n \"ETH/USDT\",\n \"BTC/USDT\",\n \"XRP/ETH\"\n]\nNote
The pairs.json file is only used when no configuration is loaded (implicitly by naming, or via --config flag). You can force the usage of this file via --pairs-file pairs.json - however we recommend to use the pairlist from within the configuration, either via exchange.pair_whitelist or pairs setting in the configuration.
usage: freqtrade convert-data [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [-p PAIRS [PAIRS ...]] --format-from\n {json,jsongz,feather,parquet} --format-to\n {json,jsongz,feather,parquet} [--erase]\n [--exchange EXCHANGE]\n [-t TIMEFRAMES [TIMEFRAMES ...]]\n [--trading-mode {spot,margin,futures}]\n [--candle-types {spot,futures,mark,index,premiumIndex,funding_rate} [{spot,futures,mark,index,premiumIndex,funding_rate} ...]]\n\noptions:\n -h, --help show this help message and exit\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --format-from {json,jsongz,feather,parquet}\n Source format for data conversion.\n --format-to {json,jsongz,feather,parquet}\n Destination format for data conversion.\n --erase Clean all existing data for the selected\n exchange/pairs/timeframes.\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\n -t TIMEFRAMES [TIMEFRAMES ...], --timeframes TIMEFRAMES [TIMEFRAMES ...]\n Specify which tickers to download. Space-separated\n list. Default: `1m 5m`.\n --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}\n Select Trading mode\n --candle-types {spot,futures,mark,index,premiumIndex,funding_rate} [{spot,futures,mark,index,premiumIndex,funding_rate} ...]\n Select candle type to convert. Defaults to all\n available types.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nThe following command will convert all candle (OHLCV) data available in ~/.freqtrade/data/binance from json to jsongz, saving diskspace in the process. It'll also remove original json data files (--erase parameter).
freqtrade convert-data --format-from json --format-to jsongz --datadir ~/.freqtrade/data/binance -t 5m 15m --erase\nusage: freqtrade convert-trade-data [-h] [-v] [--no-color] [--logfile FILE]\n [-V] [-c PATH] [-d PATH] [--userdir PATH]\n [-p PAIRS [PAIRS ...]] --format-from\n {json,jsongz,feather,parquet,kraken_csv}\n --format-to {json,jsongz,feather,parquet}\n [--erase] [--exchange EXCHANGE]\n\noptions:\n -h, --help show this help message and exit\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --format-from {json,jsongz,feather,parquet,kraken_csv}\n Source format for data conversion.\n --format-to {json,jsongz,feather,parquet}\n Destination format for data conversion.\n --erase Clean all existing data for the selected\n exchange/pairs/timeframes.\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nThe following command will convert all available trade-data in ~/.freqtrade/data/kraken from jsongz to json. It'll also remove original jsongz data files (--erase parameter).
freqtrade convert-trade-data --format-from jsongz --format-to json --datadir ~/.freqtrade/data/kraken --erase\nWhen you need to use --dl-trades (kraken only) to download data, conversion of trades data to ohlcv data is the last step. This command will allow you to repeat this last step for additional timeframes without re-downloading the data.
usage: freqtrade trades-to-ohlcv [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [-p PAIRS [PAIRS ...]]\n [-t TIMEFRAMES [TIMEFRAMES ...]]\n [--exchange EXCHANGE]\n [--data-format-ohlcv {json,jsongz,feather,parquet}]\n [--data-format-trades {json,jsongz,feather,parquet}]\n [--trading-mode {spot,margin,futures}]\n\noptions:\n -h, --help show this help message and exit\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n -t TIMEFRAMES [TIMEFRAMES ...], --timeframes TIMEFRAMES [TIMEFRAMES ...]\n Specify which tickers to download. Space-separated\n list. Default: `1m 5m`.\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\n --data-format-ohlcv {json,jsongz,feather,parquet}\n Storage format for downloaded candle (OHLCV) data.\n (default: `feather`).\n --data-format-trades {json,jsongz,feather,parquet}\n Storage format for downloaded trades data. (default:\n `feather`).\n --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}\n Select Trading mode\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nfreqtrade trades-to-ohlcv --exchange kraken -t 5m 1h 1d --pairs BTC/EUR ETH/EUR\nYou can get a list of downloaded data using the list-data sub-command.
usage: freqtrade list-data [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [--exchange EXCHANGE]\n [--data-format-ohlcv {json,jsongz,feather,parquet}]\n [--data-format-trades {json,jsongz,feather,parquet}]\n [--trades] [-p PAIRS [PAIRS ...]]\n [--trading-mode {spot,margin,futures}]\n [--show-timerange]\n\noptions:\n -h, --help show this help message and exit\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\n --data-format-ohlcv {json,jsongz,feather,parquet}\n Storage format for downloaded candle (OHLCV) data.\n (default: `feather`).\n --data-format-trades {json,jsongz,feather,parquet}\n Storage format for downloaded trades data. (default:\n `feather`).\n --trades Work on trades data instead of OHLCV data.\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}\n Select Trading mode\n --show-timerange Show timerange available for available data. (May take\n a while to calculate).\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n> freqtrade list-data --userdir ~/.freqtrade/user_data/\n\n Found 33 pair / timeframe combinations.\n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Pair \u2503 Timeframe \u2503 Type \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 ADA/BTC \u2502 5m, 15m, 30m, 1h, 2h, 4h, 6h, 12h, 1d \u2502 spot \u2502\n\u2502 ADA/ETH \u2502 5m, 15m, 30m, 1h, 2h, 4h, 6h, 12h, 1d \u2502 spot \u2502\n\u2502 ETH/BTC \u2502 5m, 15m, 30m, 1h, 2h, 4h, 6h, 12h, 1d \u2502 spot \u2502\n\u2502 ETH/USDT \u2502 5m, 15m, 30m, 1h, 2h, 4h \u2502 spot \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2518\nShow all trades data including from/to timerange
> freqtrade list-data --show --trades\n Found trades data for 1 pair. \n\u250f\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2533\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2513\n\u2503 Pair \u2503 Type \u2503 From \u2503 To \u2503 Trades \u2503\n\u2521\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2547\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2529\n\u2502 XRP/ETH \u2502 spot \u2502 2019-10-11 00:00:11 \u2502 2019-10-13 11:19:28 \u2502 12477 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\nBy default, download-data sub-command downloads Candles (OHLCV) data. Most exchanges also provide historic trade-data via their API. This data can be useful if you need many different timeframes, since it is only downloaded once, and then resampled locally to the desired timeframes.
Since this data is large by default, the files use the feather file format by default. They are stored in your data-directory with the naming convention of <pair>-trades.feather (ETH_BTC-trades.feather). Incremental mode is also supported, as for historic OHLCV data, so downloading the data once per week with --days 8 will create an incremental data-repository.
To use this mode, simply add --dl-trades to your call. This will swap the download method to download trades. If --convert is also provided, the resample step will happen automatically and overwrite eventually existing OHLCV data for the given pair/timeframe combinations.
Do not use
You should not use this unless you're a kraken user (Kraken does not provide historic OHLCV data). Most other exchanges provide OHLCV data with sufficient history, so downloading multiple timeframes through that method will still proof to be a lot faster than downloading trades data.
Kraken user
Kraken users should read this before starting to download data.
Example call:
freqtrade download-data --exchange kraken --pairs XRP/EUR ETH/EUR --days 20 --dl-trades\nNote
While this method uses async calls, it will be slow, since it requires the result of the previous call to generate the next request to the exchange.
"},{"location":"data-download/#next-step","title":"Next step","text":"Great, you now have some data downloaded, so you can now start backtesting your strategy.
"},{"location":"deprecated/","title":"Deprecated features","text":"This page contains description of the command line arguments, configuration parameters and the bot features that were declared as DEPRECATED by the bot development team and are no longer supported. Please avoid their usage in your configuration.
"},{"location":"deprecated/#removed-features","title":"Removed features","text":""},{"location":"deprecated/#the-refresh-pairs-cached-command-line-option","title":"the--refresh-pairs-cached command line option","text":"--refresh-pairs-cached in the context of backtesting, hyperopt and edge allows to refresh candle data for backtesting. Since this leads to much confusion, and slows down backtesting (while not being part of backtesting) this has been singled out as a separate freqtrade sub-command freqtrade download-data.
This command line option was deprecated in 2019.7-dev (develop branch) and removed in 2019.9.
"},{"location":"deprecated/#the-dynamic-whitelist-command-line-option","title":"The --dynamic-whitelist command line option","text":"This command line option was deprecated in 2018 and removed freqtrade 2019.6-dev (develop branch) and in freqtrade 2019.7. Please refer to pairlists instead.
"},{"location":"deprecated/#the-live-command-line-option","title":"the--live command line option","text":"--live in the context of backtesting allowed to download the latest tick data for backtesting. Did only download the latest 500 candles, so was ineffective in getting good backtest data. Removed in 2019-7-dev (develop branch) and in freqtrade 2019.8.
ticker_interval (now timeframe)","text":"Support for ticker_interval terminology was deprecated in 2020.6 in favor of timeframe - and compatibility code was removed in 2022.3.
The former \"pairlist\" section in the configuration has been removed, and is replaced by \"pairlists\" - being a list to specify a sequence of pairlists.
The old section of configuration parameters (\"pairlist\") has been deprecated in 2019.11 and has been removed in 2020.4.
Since only quoteVolume can be compared between assets, the other options (bidVolume, askVolume) have been deprecated in 2020.4, and have been removed in 2020.9.
"},{"location":"deprecated/#using-order-book-steps-for-exit-price","title":"Using order book steps for exit price","text":"Using order_book_min and order_book_max used to allow stepping the orderbook and trying to find the next ROI slot - trying to place sell-orders early. As this does however increase risk and provides no benefit, it's been removed for maintainability purposes in 2021.7.
Using separate hyperopt files was deprecated in 2021.4 and was removed in 2021.9. Please switch to the new Parametrized Strategies to benefit from the new hyperopt interface.
"},{"location":"deprecated/#strategy-changes-between-v2-and-v3","title":"Strategy changes between V2 and V3","text":"Isolated Futures / short trading was introduced in 2022.4. This required major changes to configuration settings, strategy interfaces, ...
We have put a great effort into keeping compatibility with existing strategies, so if you just want to continue using freqtrade in spot markets, there are no changes necessary. While we may drop support for the current interface sometime in the future, we will announce this separately and have an appropriate transition period.
Please follow the Strategy migration guide to migrate your strategy to the new format to start using the new functionalities.
"},{"location":"deprecated/#webhooks-changes-with-20224","title":"webhooks - changes with 2022.4","text":""},{"location":"deprecated/#buy_tag-has-been-renamed-to-enter_tag","title":"buy_tag has been renamed to enter_tag","text":"This should apply only to your strategy and potentially to webhooks. We will keep a compatibility layer for 1-2 versions (so both buy_tag and enter_tag will still work), but support for this in webhooks will disappear after that.
Webhook terminology changed from \"sell\" to \"exit\", and from \"buy\" to \"entry\", removing \"webhook\" in the process.
webhookbuy, webhookentry -> entrywebhookbuyfill, webhookentryfill -> entry_fillwebhookbuycancel, webhookentrycancel -> entry_cancelwebhooksell, webhookexit -> exitwebhooksellfill, webhookexitfill -> exit_fillwebhooksellcancel, webhookexitcancel -> exit_cancelpopulate_any_indicators","text":"version 2023.3 saw the removal of populate_any_indicators in favor of split methods for feature engineering and targets. Please read the migration document for full details.
protections from configuration","text":"Setting protections from the configuration via \"protections\": [], has been removed in 2024.10, after having raised deprecation warnings for over 3 years.
Using hdf5 as data storage has been deprecated in 2024.12 and was removed in 2025.1. We recommend switching to the feather data format.
Please use the convert-data subcommand to convert your existing data to one of the supported formats before updating.
Configuring syslog and journald via --logfile systemd and --logfile journald respectively has been deprecated in 2025.3. Please use configuration based log setup instead.
The edge module has been deprecated in 2023.9 and removed in 2025.6. All functionalities of edge have been removed, and having edge configured will result in an error.
"},{"location":"developer/","title":"Development Help","text":"This page is intended for developers of Freqtrade, people who want to contribute to the Freqtrade codebase or documentation, or people who want to understand the source code of the application they're running.
All contributions, bug reports, bug fixes, documentation improvements, enhancements and ideas are welcome. We track issues on GitHub and also have a dev channel on discord where you can ask questions.
"},{"location":"developer/#documentation","title":"Documentation","text":"Documentation is available at https://freqtrade.io and needs to be provided with every new feature PR.
Special fields for the documentation (like Note boxes, ...) can be found here.
To test the documentation locally use the following commands.
pip install -r docs/requirements-docs.txt\nmkdocs serve\nThis will spin up a local server (usually on port 8000) so you can see if everything looks as you'd like it to.
"},{"location":"developer/#developer-setup","title":"Developer setup","text":"To configure a development environment, you can either use the provided DevContainer, or use the setup.sh script and answer \"y\" when asked \"Do you want to install dependencies for dev [y/N]? \". Alternatively (e.g. if your system is not supported by the setup.sh script), follow the manual installation process and run pip3 install -r requirements-dev.txt - followed by pip3 install -e .[all].
This will install all required tools for development, including pytest, ruff, mypy, and coveralls.
Then install the git hook scripts by running pre-commit install, so your changes will be verified locally before committing. This avoids a lot of waiting for CI already, as some basic formatting checks are done locally on your machine.
Before opening a pull request, please familiarize yourself with our Contributing Guidelines.
"},{"location":"developer/#devcontainer-setup","title":"Devcontainer setup","text":"The fastest and easiest way to get started is to use VSCode with the Remote container extension. This gives developers the ability to start the bot with all required dependencies without needing to install any freqtrade specific dependencies on your local machine.
"},{"location":"developer/#devcontainer-dependencies","title":"Devcontainer dependencies","text":"For more information about the Remote container extension, best consult the documentation.
"},{"location":"developer/#tests","title":"Tests","text":"New code should be covered by basic unittests. Depending on the complexity of the feature, Reviewers may request more in-depth unittests. If necessary, the Freqtrade team can assist and give guidance with writing good tests (however please don't expect anyone to write the tests for you).
"},{"location":"developer/#how-to-run-tests","title":"How to run tests","text":"Use pytest in root folder to run all available testcases and confirm your local environment is setup correctly
feature branches
Tests are expected to pass on the develop and stable branches. Other branches may be work in progress with tests not working yet.
Freqtrade uses 2 main methods to check log content in tests, log_has() and log_has_re() (to check using regex, in case of dynamic log-messages). These are available from conftest.py and can be imported in any test module.
A sample check looks as follows:
from tests.conftest import log_has, log_has_re\n\ndef test_method_to_test(caplog):\n method_to_test()\n\n assert log_has(\"This event happened\", caplog)\n # Check regex with trailing number ...\n assert log_has_re(r\"This dynamic event happened and produced \\d+\", caplog)\nTo debug freqtrade, we recommend VSCode (with the Python extension) with the following launch configuration (located in .vscode/launch.json). Details will obviously vary between setups - but this should work to get you started.
{\n \"name\": \"freqtrade trade\",\n \"type\": \"debugpy\",\n \"request\": \"launch\",\n \"module\": \"freqtrade\",\n \"console\": \"integratedTerminal\",\n \"args\": [\n \"trade\",\n // Optional:\n // \"--userdir\", \"user_data\",\n \"--strategy\", \n \"MyAwesomeStrategy\",\n ]\n},\nCommand line arguments can be added in the \"args\" array. This method can also be used to debug a strategy, by setting the breakpoints within the strategy.
A similar setup can also be taken for Pycharm - using freqtrade as module name, and setting the command line arguments as \"parameters\".
When using a virtual environment (which you should), make sure that your Editor is using the correct virtual environment to avoid problems or \"unknown import\" errors.
Startup directory
This assumes that you have the repository checked out, and the editor is started at the repository root level (so pyproject.toml is at the top level of your repository).
"},{"location":"developer/#vscode","title":"Vscode","text":"You can select the correct environment in VSCode with the command \"Python: Select Interpreter\" - which will show you environments the extension detected. If your environment has not been detected, you can also pick a path manually.
"},{"location":"developer/#pycharm","title":"Pycharm","text":"In pycharm, you can select the appropriate Environment in the \"Run/Debug Configurations\" window.
"},{"location":"developer/#errorhandling","title":"ErrorHandling","text":"Freqtrade Exceptions all inherit from FreqtradeException. This general class of error should however not be used directly. Instead, multiple specialized sub-Exceptions exist.
Below is an outline of exception inheritance hierarchy:
+ FreqtradeException\n|\n+---+ OperationalException\n| |\n| +---+ ConfigurationError\n|\n+---+ DependencyException\n| |\n| +---+ PricingError\n| |\n| +---+ ExchangeError\n| |\n| +---+ TemporaryError\n| |\n| +---+ DDosProtection\n| |\n| +---+ InvalidOrderException\n| |\n| +---+ RetryableOrderError\n| |\n| +---+ InsufficientFundsError\n|\n+---+ StrategyError\nYou have a great idea for a new pair selection algorithm you would like to try out? Great. Hopefully you also want to contribute this back upstream.
Whatever your motivations are - This should get you off the ground in trying to develop a new Pairlist Handler.
First of all, have a look at the VolumePairList Handler, and best copy this file with a name of your new Pairlist Handler.
This is a simple Handler, which however serves as a good example on how to start developing.
Next, modify the class-name of the Handler (ideally align this with the module filename).
The base-class provides an instance of the exchange (self._exchange) the pairlist manager (self._pairlistmanager), as well as the main configuration (self._config), the pairlist dedicated configuration (self._pairlistconfig) and the absolute position within the list of pairlists.
self._exchange = exchange\n self._pairlistmanager = pairlistmanager\n self._config = config\n self._pairlistconfig = pairlistconfig\n self._pairlist_pos = pairlist_pos\nTip
Don't forget to register your pairlist in constants.py under the variable AVAILABLE_PAIRLISTS - otherwise it will not be selectable.
Now, let's step through the methods which require actions:
"},{"location":"developer/#pairlist-configuration","title":"Pairlist configuration","text":"Configuration for the chain of Pairlist Handlers is done in the bot configuration file in the element \"pairlists\", an array of configuration parameters for each Pairlist Handlers in the chain.
By convention, \"number_assets\" is used to specify the maximum number of pairs to keep in the pairlist. Please follow this to ensure a consistent user experience.
Additional parameters can be configured as needed. For instance, VolumePairList uses \"sort_key\" to specify the sorting value - however feel free to specify whatever is necessary for your great algorithm to be successful and dynamic.
Returns a description used for Telegram messages.
This should contain the name of the Pairlist Handler, as well as a short description containing the number of assets. Please follow the format \"PairlistName - top/bottom X pairs\".
Override this method if the Pairlist Handler can be used as the leading Pairlist Handler in the chain, defining the initial pairlist which is then handled by all Pairlist Handlers in the chain. Examples are StaticPairList and VolumePairList.
This is called with each iteration of the bot (only if the Pairlist Handler is at the first location) - so consider implementing caching for compute/network heavy calculations.
It must return the resulting pairlist (which may then be passed into the chain of Pairlist Handlers).
Validations are optional, the parent class exposes a verify_blacklist(pairlist) and _whitelist_for_active_markets(pairlist) to do default filtering. Use this if you limit your result to a certain number of pairs - so the end-result is not shorter than expected.
This method is called for each Pairlist Handler in the chain by the pairlist manager.
This is called with each iteration of the bot - so consider implementing caching for compute/network heavy calculations.
It gets passed a pairlist (which can be the result of previous pairlists) as well as tickers, a pre-fetched version of get_tickers().
The default implementation in the base class simply calls the _validate_pair() method for each pair in the pairlist, but you may override it. So you should either implement the _validate_pair() in your Pairlist Handler or override filter_pairlist() to do something else.
If overridden, it must return the resulting pairlist (which may then be passed into the next Pairlist Handler in the chain).
Validations are optional, the parent class exposes a verify_blacklist(pairlist) and _whitelist_for_active_markets(pairlist) to do default filters. Use this if you limit your result to a certain number of pairs - so the end result is not shorter than expected.
In VolumePairList, this implements different methods of sorting, does early validation so only the expected number of pairs is returned.
def filter_pairlist(self, pairlist: list[str], tickers: dict) -> List[str]:\n # Generate dynamic whitelist\n pairs = self._calculate_pairlist(pairlist, tickers)\n return pairs\nBest read the Protection documentation to understand protections. This Guide is directed towards Developers who want to develop a new protection.
No protection should use datetime directly, but use the provided date_now variable for date calculations. This preserves the ability to backtest protections.
Writing a new Protection
Best copy one of the existing Protections to have a good example.
"},{"location":"developer/#implementation-of-a-new-protection","title":"Implementation of a new protection","text":"All Protection implementations must have IProtection as parent class. For that reason, they must implement the following methods:
short_desc()global_stop()stop_per_pair().global_stop() and stop_per_pair() must return a ProtectionReturn object, which consists of:
The until portion should be calculated using the provided calculate_lock_end() method.
All Protections should use \"stop_duration\" / \"stop_duration_candles\" to define how long a pair (or all pairs) should be locked. The content of this is made available as self._stop_duration to the each Protection.
If your protection requires a look-back period, please use \"lookback_period\" / \"lockback_period_candles\" to keep all protections aligned.
Protections can have 2 different ways to stop trading for a limited :
Protections that implement the per pair approach must set has_local_stop=True. The method stop_per_pair() will be called whenever a trade closed (exit order completed).
These Protections should do their evaluation across all pairs, and consequently will also lock all pairs from trading (called a global PairLock). Global protection must set has_global_stop=True to be evaluated for global stops. The method global_stop() will be called whenever a trade closed (exit order completed).
Protections should calculate the lock end time based on the last trade it considers. This avoids re-locking should the lookback-period be longer than the actual lock period.
The IProtection parent class provides a helper method for this in calculate_lock_end().
Note
This section is a Work in Progress and is not a complete guide on how to test a new exchange with Freqtrade.
Note
Make sure to use an up-to-date version of CCXT before running any of the below tests. You can get the latest version of ccxt by running pip install -U ccxt with activated virtual environment. Native docker is not supported for these tests, however the available dev-container will support all required actions and eventually necessary changes.
Most exchanges supported by CCXT should work out of the box.
If you need to implement a specific exchange class, these are found in the freqtrade/exchange source folder. You'll also need to add the import to freqtrade/exchange/__init__.py to make the loading logic aware of the new exchange. We recommend looking at existing exchange implementations to get an idea of what might be required.
Warning
Implementing and testing an exchange can be a lot of trial and error, so please bear this in mind. You should also have some development experience, as this is not a beginner task.
To quickly test the public endpoints of an exchange, add a configuration for your exchange to tests/exchange_online/conftest.py and run these tests with pytest --longrun tests/exchange_online/test_ccxt_compat.py. Completing these tests successfully a good basis point (it's a requirement, actually), however these won't guarantee correct exchange functioning, as this only tests public endpoints, but no private endpoint (like generate order or similar).
Also try to use freqtrade download-data for an extended timerange (multiple months) and verify that the data downloaded correctly (no holes, the specified timerange was actually downloaded).
These are prerequisites to have an exchange listed as either Supported or Community tested (listed on the homepage). The below are \"extras\", which will make an exchange better (feature-complete) - but are not absolutely necessary for either of the 2 categories.
Additional tests / steps to complete:
fetch_ohlcv() - and eventually adjust ohlcv_candle_limit for this exchange(*) Requires API keys and Balance on the exchange.
"},{"location":"developer/#stoploss-on-exchange","title":"Stoploss On Exchange","text":"Check if the new exchange supports Stoploss on Exchange orders through their API.
Since CCXT does not provide unification for Stoploss On Exchange yet, we'll need to implement the exchange-specific parameters ourselves. Best look at binance.py for an example implementation of this. You'll need to dig through the documentation of the Exchange's API on how exactly this can be done. CCXT Issues may also provide great help, since others may have implemented something similar for their projects.
While fetching candle (OHLCV) data, we may end up getting incomplete candles (depending on the exchange). To demonstrate this, we'll use daily candles (\"1d\") to keep things simple. We query the api (ct.fetch_ohlcv()) for the timeframe and look at the date of the last entry. If this entry changes or shows the date of a \"incomplete\" candle, then we should drop this since having incomplete candles is problematic because indicators assume that only complete candles are passed to them, and will generate a lot of false buy signals. By default, we're therefore removing the last candle assuming it's incomplete.
To check how the new exchange behaves, you can use the following snippet:
import ccxt\nfrom datetime import datetime, timezone\nfrom freqtrade.data.converter import ohlcv_to_dataframe\nct = ccxt.binance() # Use the exchange you're testing\ntimeframe = \"1d\"\npair = \"BTC/USDT\" # Make sure to use a pair that exists on that exchange!\nraw = ct.fetch_ohlcv(pair, timeframe=timeframe)\n\n# convert to dataframe\ndf1 = ohlcv_to_dataframe(raw, timeframe, pair=pair, drop_incomplete=False)\n\nprint(df1.tail(1))\nprint(datetime.now(timezone.utc))\n date open high low close volume \n499 2019-06-08 00:00:00+00:00 0.000007 0.000007 0.000007 0.000007 26264344.0 \n2019-06-09 12:30:27.873327\nThe output will show the last entry from the Exchange as well as the current UTC date. If the day shows the same day, then the last candle can be assumed as incomplete and should be dropped (leave the setting \"ohlcv_partial_candle\" from the exchange-class untouched / True). Otherwise, set \"ohlcv_partial_candle\" to False to not drop Candles (shown in the example above). Another way is to run this command multiple times in a row and observe if the volume is changing (while the date remains the same).
Updating leveraged tiers should be done regularly - and requires an authenticated account with futures enabled.
import ccxt\nimport json\nfrom pathlib import Path\n\nexchange = ccxt.binance({\n 'apiKey': '<apikey>',\n 'secret': '<secret>',\n 'options': {'defaultType': 'swap'}\n })\n_ = exchange.load_markets()\n\nlev_tiers = exchange.fetch_leverage_tiers()\n\n# Assumes this is running in the root of the repository.\nfile = Path('freqtrade/exchange/binance_leverage_tiers.json')\njson.dump(dict(sorted(lev_tiers.items())), file.open('w'), indent=2)\nThis file should then be contributed upstream, so others can benefit from this, too.
"},{"location":"developer/#updating-example-notebooks","title":"Updating example notebooks","text":"To keep the jupyter notebooks aligned with the documentation, the following should be ran after updating a example notebook.
jupyter nbconvert --ClearOutputPreprocessor.enabled=True --inplace freqtrade/templates/strategy_analysis_example.ipynb\njupyter nbconvert --ClearOutputPreprocessor.enabled=True --to markdown freqtrade/templates/strategy_analysis_example.ipynb --stdout > docs/strategy_analysis_example.md\nTo generate backtest outputs, please use the following commands:
# Assume a dedicated user directory for this output\nfreqtrade create-userdir --userdir user_data_bttest/\n# set can_short = True\nsed -i \"s/can_short: bool = False/can_short: bool = True/\" user_data_bttest/strategies/sample_strategy.py\n\nfreqtrade download-data --timerange 20250625-20250801 --config tests/testdata/config.tests.usdt.json --userdir user_data_bttest/ -t 5m\n\nfreqtrade backtesting --config tests/testdata/config.tests.usdt.json -s SampleStrategy --userdir user_data_bttest/ --cache none --timerange 20250701-20250801\nThis documents some decisions taken for the CI Pipeline.
stable and develop, and are built as multiarch builds, supporting multiple platforms via the same tag.stable_plot and develop_plot./freqtrade/freqtrade_commit containing the commit this image is based of.stable or develop.This part of the documentation is aimed at maintainers, and shows how to create a release.
"},{"location":"developer/#create-release-branch","title":"Create release branch","text":"Note
Make sure that the stable branch is up-to-date!
First, pick a commit that's about one week old (to not include latest additions to releases).
# create new branch\ngit checkout -b new_release <commitid>\nDetermine if crucial bugfixes have been made between this commit and the current state, and eventually cherry-pick these.
freqtrade/__init__.py and add the version matching the current date (for example 2019.7 for July 2019). Minor versions can be 2019.7.1 should we need to do a second release that month. Version numbers must follow allowed versions from PEP0440 to avoid failures pushing to pypi.2019.8-dev.# Needs to be done before merging / pulling that branch.\ngit log --oneline --no-decorate --no-merges stable..new_release\nTo keep the release-log short, best wrap the full git changelog into a collapsible details section.
<details>\n<summary>Expand full changelog</summary>\n\n... Full git changelog\n\n</details>\nIf FreqUI has been updated substantially, make sure to create a release before merging the release branch. Make sure that freqUI CI on the release is finished and passed before merging the release.
"},{"location":"developer/#create-github-release-tag","title":"Create github release / tag","text":"Once the PR against stable is merged (best right after merging):
## Highlighted changes\n\n- ...\n\n### How to update\n\nAs always, you can update your bot using one of the following commands:\n\n#### docker-compose\n\n```bash\ndocker-compose pull\ndocker-compose up -d\n```\n\n#### Installation via setup script\n\n```\n# Deactivate venv and run \n./setup.sh --update\n```\n\n#### Plain native installation\n\n```\ngit pull\npip install -U -r requirements.txt\n```\n\n<details>\n<summary>Expand full changelog</summary>\n\n```\n<Paste your changelog here>\n```\n\n</details>\nManual Releases
This process is automated as part of Github Actions. Manual pypi pushes should not be necessary.
Manual releaseTo manually create a pypi release, please run the following commands:
Additional requirement: wheel, twine (for uploading), account on pypi with proper permissions.
pip install -U build\npython -m build --sdist --wheel\n\n# For pypi test (to check if some change to the installation did work)\ntwine upload --repository-url https://test.pypi.org/legacy/ dist/*\n\n# For production:\ntwine upload dist/*\nPlease don't push non-releases to the productive / real pypi instance.
"},{"location":"docker_quickstart/","title":"Using Freqtrade with Docker","text":"This page explains how to run the bot with Docker. It is not meant to work out of the box. You'll still need to read through the documentation and understand how to properly configure it.
"},{"location":"docker_quickstart/#install-docker","title":"Install Docker","text":"Start by downloading and installing Docker / Docker Desktop for your platform:
Docker compose install
Freqtrade documentation assumes the use of Docker desktop (or the docker compose plugin). While the docker-compose standalone installation still works, it will require changing all docker compose commands from docker compose to docker-compose to work (e.g. docker compose up -d will become docker-compose up -d).
If you just installed docker on a windows system, make sure to reboot your system, otherwise you might encounter unexplainable Problems related to network connectivity to docker containers.
"},{"location":"docker_quickstart/#freqtrade-with-docker","title":"Freqtrade with docker","text":"Freqtrade provides an official Docker image on Dockerhub, as well as a docker compose file ready for usage.
Note
docker is installed and available to the logged in user.docker-compose.yml file.Create a new directory and place the docker-compose file in this directory.
mkdir ft_userdata\ncd ft_userdata/\n# Download the docker-compose file from the repository\ncurl https://raw.githubusercontent.com/freqtrade/freqtrade/stable/docker-compose.yml -o docker-compose.yml\n\n# Pull the freqtrade image\ndocker compose pull\n\n# Create user directory structure\ndocker compose run --rm freqtrade create-userdir --userdir user_data\n\n# Create configuration - Requires answering interactive questions\ndocker compose run --rm freqtrade new-config --config user_data/config.json\nThe above snippet creates a new directory called ft_userdata, downloads the latest compose file and pulls the freqtrade image. The last 2 steps in the snippet create the directory with user_data, as well as (interactively) the default configuration based on your selections.
How to edit the bot configuration?
You can edit the configuration at any time, which is available as user_data/config.json (within the directory ft_userdata) when using the above configuration.
You can also change the both Strategy and commands by editing the command section of your docker-compose.yml file.
user_data/config.jsonuser_data/strategies/docker-compose.yml fileThe SampleStrategy is run by default.
SampleStrategy is just a demo!
The SampleStrategy is there for your reference and give you ideas for your own strategy. Please always backtest your strategy and use dry-run for some time before risking real money! You will find more information about Strategy development in the Strategy documentation.
Once this is done, you're ready to launch the bot in trading mode (Dry-run or Live-trading, depending on your answer to the corresponding question you made above).
docker compose up -d\nDefault configuration
While the configuration generated will be mostly functional, you will still need to verify that all options correspond to what you want (like Pricing, pairlist, ...) before starting the bot.
"},{"location":"docker_quickstart/#accessing-the-ui","title":"Accessing the UI","text":"If you've selected to enable FreqUI in the new-config step, you will have freqUI available at port localhost:8080.
You can now access the UI by typing localhost:8080 in your browser.
UI Access on a remote serverIf you're running on a VPS, you should consider using either a ssh tunnel, or setup a VPN (openVPN, wireguard) to connect to your bot. This will ensure that freqUI is not directly exposed to the internet, which is not recommended for security reasons (freqUI does not support https out of the box). Setup of these tools is not part of this tutorial, however many good tutorials can be found on the internet. Please also read the API configuration with docker section to learn more about this configuration.
"},{"location":"docker_quickstart/#monitoring-the-bot","title":"Monitoring the bot","text":"You can check for running instances with docker compose ps. This should list the service freqtrade as running. If that's not the case, best check the logs (see next point).
Logs will be written to: user_data/logs/freqtrade.log. You can also check the latest log with the command docker compose logs -f.
The database will be located at: user_data/tradesv3.sqlite
Updating freqtrade when using docker is as simple as running the following 2 commands:
# Download the latest image\ndocker compose pull\n# Restart the image\ndocker compose up -d\nThis will first pull the latest image, and will then restart the container with the just pulled version.
Check the Changelog
You should always check the changelog for breaking changes / manual interventions required and make sure the bot starts correctly after the update.
"},{"location":"docker_quickstart/#editing-the-docker-compose-file","title":"Editing the docker-compose file","text":"Advanced users may edit the docker-compose file further to include all possible options or arguments.
All freqtrade arguments will be available by running docker compose run --rm freqtrade <command> <optional arguments>.
docker compose for trade commands
Trade commands (freqtrade trade <...>) should not be ran via docker compose run - but should use docker compose up -d instead. This makes sure that the container is properly started (including port forwardings) and will make sure that the container will restart after a system reboot. If you intend to use freqUI, please also ensure to adjust the configuration accordingly, otherwise the UI will not be available.
docker compose run --rm
Including --rm will remove the container after completion, and is highly recommended for all modes except trading mode (running with freqtrade trade command).
\"docker compose run --rm\" will require a compose file to be provided. Some freqtrade commands that don't require authentication such as list-pairs can be run with \"docker run --rm\" instead. For example docker run --rm freqtradeorg/freqtrade:stable list-pairs --exchange binance --quote BTC --print-json. This can be useful for fetching exchange information to add to your config.json without affecting your running containers.
Download backtesting data for 5 days for the pair ETH/BTC and 1h timeframe from Binance. The data will be stored in the directory user_data/data/ on the host.
docker compose run --rm freqtrade download-data --pairs ETH/BTC --exchange binance --days 5 -t 1h\nHead over to the Data Downloading Documentation for more details on downloading data.
"},{"location":"docker_quickstart/#example-backtest-with-docker","title":"Example: Backtest with docker","text":"Run backtesting in docker-containers for SampleStrategy and specified timerange of historical data, on 5m timeframe:
docker compose run --rm freqtrade backtesting --config user_data/config.json --strategy SampleStrategy --timerange 20190801-20191001 -i 5m\nHead over to the Backtesting Documentation to learn more.
"},{"location":"docker_quickstart/#additional-dependencies-with-docker","title":"Additional dependencies with docker","text":"If your strategy requires dependencies not included in the default image - it will be necessary to build the image on your host. For this, please create a Dockerfile containing installation steps for the additional dependencies (have a look at docker/Dockerfile.custom for an example).
You'll then also need to modify the docker-compose.yml file and uncomment the build step, as well as rename the image to avoid naming collisions.
image: freqtrade_custom\n build:\n context: .\n dockerfile: \"./Dockerfile.<yourextension>\"\nYou can then run docker compose build --pull to build the docker image, and run it using the commands described above.
Commands freqtrade plot-profit and freqtrade plot-dataframe (Documentation) are available by changing the image to *_plot in your docker-compose.yml file. You can then use these commands as follows:
docker compose run --rm freqtrade plot-dataframe --strategy AwesomeStrategy -p BTC/ETH --timerange=20180801-20180805\nThe output will be stored in the user_data/plot directory, and can be opened with any modern browser.
Freqtrade provides a docker-compose file which starts up a jupyter lab server. You can run this server using the following command:
docker compose -f docker/docker-compose-jupyter.yml up\nThis will create a docker-container running jupyter lab, which will be accessible using https://127.0.0.1:8888/lab. Please use the link that's printed in the console after startup for simplified login.
Since part of this image is built on your machine, it is recommended to rebuild the image from time to time to keep freqtrade (and dependencies) up-to-date.
docker compose -f docker/docker-compose-jupyter.yml build --no-cache\nError: \"Timestamp for this request is outside of the recvWindow.\" The market api requests require a synchronized clock but the time in the docker container shifts a bit over time into the past. To fix this issue temporarily you need to run wsl --shutdown and restart docker again (a popup on windows 10 will ask you to do so). A permanent solution is either to host the docker container on a linux host or restart the wsl from time to time with the scheduler.
taskkill /IM \"Docker Desktop.exe\" /F\nwsl --shutdown\nstart \"\" \"C:\\Program Files\\Docker\\Docker\\Docker Desktop.exe\"\nWarning
Due to the above, we do not recommend the usage of docker on windows for production setups, but only for experimentation, datadownload and backtesting. Best use a linux-VPS for running freqtrade reliably.
"},{"location":"exchanges/","title":"Exchange-specific Notes","text":"This page combines common gotchas and Information which are exchange-specific and most likely don't apply to other exchanges.
"},{"location":"exchanges/#quick-overview-of-supported-exchange-features","title":"Quick overview of supported exchange features","text":"Exchange Mode Margin mode Stoploss type Binance spot limit Binance futures isolated, cross market, limit Bingx spot market, limit Bitmart spot \u274c (not supported) Bybit spot \u274c (not supported) Bybit futures isolated market, limit Gate.io spot limit Gate.io futures isolated limit HTX spot limit Hyperliquid spot \u274c (not supported) Hyperliquid futures isolated limit Kraken spot market, limit OKX spot limit OKX futures isolated limit Bitvavo spot \u274c (not supported) Kucoin spot market, limit"},{"location":"exchanges/#exchange-configuration","title":"Exchange configuration","text":"Freqtrade is based on CCXT library that supports over 100 cryptocurrency exchange markets and trading APIs. The complete up-to-date list can be found in the CCXT repo homepage. However, the bot was tested by the development team with only a few exchanges. A current list of these can be found in the \"Home\" section of this documentation.
Feel free to test other exchanges and submit your feedback or PR to improve the bot or confirm exchanges that work flawlessly..
Some exchanges require special configuration, which can be found below.
"},{"location":"exchanges/#sample-exchange-configuration","title":"Sample exchange configuration","text":"A exchange configuration for \"binance\" would look as follows:
\"exchange\": {\n \"name\": \"binance\",\n \"key\": \"your_exchange_key\",\n \"secret\": \"your_exchange_secret\",\n \"ccxt_config\": {},\n \"ccxt_async_config\": {},\n // ... \nUsually, rate limits set by CCXT are reliable and work well. In case of problems related to rate-limits (usually DDOS Exceptions in your logs), it's easy to change rateLimit settings to other values.
\"exchange\": {\n \"name\": \"kraken\",\n \"key\": \"your_exchange_key\",\n \"secret\": \"your_exchange_secret\",\n \"ccxt_config\": {\"enableRateLimit\": true},\n \"ccxt_async_config\": {\n \"enableRateLimit\": true,\n \"rateLimit\": 3100\n },\nThis configuration enables kraken, as well as rate-limiting to avoid bans from the exchange. \"rateLimit\": 3100 defines a wait-event of 3.1s between each call. This can also be completely disabled by setting \"enableRateLimit\" to false.
Note
Optimal settings for rate-limiting depend on the exchange and the size of the whitelist, so an ideal parameter will vary on many other settings. We try to provide sensible defaults per exchange where possible, if you encounter bans please make sure that \"enableRateLimit\" is enabled and increase the \"rateLimit\" parameter step by step.
Server location and geo-ip restrictions
Please be aware that Binance restricts API access regarding the server country. The current and non-exhaustive countries blocked are Canada, Malaysia, Netherlands and United States. Please go to binance terms > b. Eligibility to find up to date list.
Binance supports time_in_force.
Stoploss on Exchange
Binance supports stoploss_on_exchange and uses stop-loss-limit orders. It provides great advantages, so we recommend to benefit from it by enabling stoploss on exchange. On futures, Binance supports both stop-limit as well as stop-market orders. You can use either \"limit\" or \"market\" in the order_types.stoploss configuration setting to decide which type to use.
For Binance, it is suggested to add \"BNB/<STAKE>\" to your blacklist to avoid issues, unless you are willing to maintain enough extra BNB on the account or unless you're willing to disable using BNB for fees. Binance accounts may use BNB for fees, and if a trade happens to be on BNB, further trades may consume this position and make the initial BNB trade unsellable as the expected amount is not there anymore.
If not enough BNB is available to cover transaction fees, then fees will not be covered by BNB and no fee reduction will occur. Freqtrade will never buy BNB to cover for fees. BNB needs to be bought and monitored manually to this end.
Binance has been split into 2, and users must use the correct ccxt exchange ID for their exchange, otherwise API keys are not recognized.
binance.binanceus.Freqtrade supports binance RSA API keys.
We recommend to use them as environment variable.
export FREQTRADE__EXCHANGE__SECRET=\"$(cat ./rsa_binance.private)\"\nThey can however also be configured via configuration file. Since json doesn't support multi-line strings, you'll have to replace all newlines with \\n to have a valid json file.
// ...\n \"key\": \"<someapikey>\",\n \"secret\": \"-----BEGIN PRIVATE KEY-----\\nMIIEvQIBABACAFQA<...>s8KX8=\\n-----END PRIVATE KEY-----\"\n// ...\nBinance has specific (unfortunately complex) Futures Trading Quantitative Rules which need to be followed, and which prohibit a too low stake-amount (among others) for too many orders. Violating these rules will result in a trading restriction.
When trading on Binance Futures market, orderbook must be used because there is no price ticker data for futures.
\"entry_pricing\": {\n \"use_order_book\": true,\n \"order_book_top\": 1,\n \"check_depth_of_market\": {\n \"enabled\": false,\n \"bids_to_ask_delta\": 1\n }\n },\n \"exit_pricing\": {\n \"use_order_book\": true,\n \"order_book_top\": 1\n },\nUsers will also have to have the futures-setting \"Position Mode\" set to \"One-way Mode\", and \"Asset Mode\" set to \"Single-Asset Mode\". These settings will be checked on startup, and freqtrade will show an error if this setting is wrong.
Freqtrade will not attempt to change these settings.
"},{"location":"exchanges/#binance-bnfcr-futures","title":"Binance BNFCR futures","text":"BNFCR mode are a special type of futures mode on Binance to work around regulatory issues in Europe. To use BNFCR futures, you will have to have the following combination of settings:
{\n // ...\n \"trading_mode\": \"futures\",\n \"margin_mode\": \"cross\",\n \"proxy_coin\": \"BNFCR\",\n \"stake_currency\": \"USDT\" // or \"USDC\"\n // ...\n}\nThe stake_currency setting defines the markets the bot will be operating in. This choice is really arbitrary.
On the exchange, you'll have to use \"Multi-asset Mode\" - and \"Position Mode set to \"One-way Mode\". Freqtrade will check these settings on startup, but won't attempt to change them.
"},{"location":"exchanges/#bingx","title":"Bingx","text":"BingX supports time_in_force with settings \"GTC\" (good till cancelled), \"IOC\" (immediate-or-cancel) and \"PO\" (Post only) settings.
Stoploss on Exchange
Bingx supports stoploss_on_exchange and can use both stop-limit and stop-market orders. It provides great advantages, so we recommend to benefit from it by enabling stoploss on exchange.
Kraken supports time_in_force with settings \"GTC\" (good till cancelled), \"IOC\" (immediate-or-cancel) and \"PO\" (Post only) settings.
Stoploss on Exchange
Kraken supports stoploss_on_exchange and can use both stop-loss-market and stop-loss-limit orders. It provides great advantages, so we recommend to benefit from it. You can use either \"limit\" or \"market\" in the order_types.stoploss configuration setting to decide which type to use.
The Kraken API does only provide 720 historic candles, which is sufficient for Freqtrade dry-run and live trade modes, but is a problem for backtesting. To download data for the Kraken exchange, using --dl-trades is mandatory, otherwise the bot will download the same 720 candles over and over, and you'll not have enough backtest data.
To speed up downloading, you can download the trades zip files kraken provides. These are usually updated once per quarter. Freqtrade expects these files to be placed in user_data/data/kraken/trades_csv.
A structure as follows can make sense if using incremental files, with the \"full\" history in one directory, and incremental files in different directories. The assumption for this mode is that the data is downloaded and unzipped keeping filenames as they are. Duplicate content will be ignored (based on timestamp) - though the assumption is that there is no gap in the data.
This means, if your \"full\" history ends in Q4 2022 - then both incremental updates Q1 2023 and Q2 2023 are available. Not having this will lead to incomplete data, and therefore invalid results while using the data.
\u2514\u2500\u2500 trades_csv\n\u00a0 \u00a0 \u251c\u2500\u2500 Kraken_full_history\n \u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 BCHEUR.csv\n \u00a0\u00a0 \u2502\u00a0\u00a0 \u2514\u2500\u2500 XBTEUR.csv\n \u00a0\u00a0 \u251c\u2500\u2500 Kraken_Trading_History_Q1_2023\n \u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 BCHEUR.csv\n \u00a0\u00a0 \u2502\u00a0\u00a0 \u2514\u2500\u2500 XBTEUR.csv\n \u00a0\u00a0 \u2514\u2500\u2500 Kraken_Trading_History_Q2_2023\n \u00a0\u00a0 \u00a0\u00a0 \u251c\u2500\u2500 BCHEUR.csv\n \u00a0\u00a0 \u00a0\u00a0 \u2514\u2500\u2500 XBTEUR.csv\nYou can convert these files into freqtrade files:
freqtrade convert-trade-data --exchange kraken --format-from kraken_csv --format-to feather\n# Convert trade data to different ohlcv timeframes\nfreqtrade trades-to-ohlcv -p BTC/EUR BCH/EUR --exchange kraken -t 1m 5m 15m 1h\nThe converted data also makes downloading data possible, and will start the download after the latest loaded trade.
freqtrade download-data --exchange kraken --dl-trades -p BTC/EUR BCH/EUR \nDownloading data from kraken
Downloading kraken data will require significantly more memory (RAM) than any other exchange, as the trades-data needs to be converted into candles on your machine. It will also take a long time, as freqtrade will need to download every single trade that happened on the exchange for the pair / timerange combination, therefore please be patient.
rateLimit tuning
Please pay attention that rateLimit configuration entry holds delay in milliseconds between requests, NOT requests/sec rate. So, in order to mitigate Kraken API \"Rate limit exceeded\" exception, this configuration should be increased, NOT decreased.
"},{"location":"exchanges/#kucoin","title":"Kucoin","text":"Kucoin requires a passphrase for each api key, you will therefore need to add this key into the configuration so your exchange section looks as follows:
\"exchange\": {\n \"name\": \"kucoin\",\n \"key\": \"your_exchange_key\",\n \"secret\": \"your_exchange_secret\",\n \"password\": \"your_exchange_api_key_password\",\n // ...\n}\nKucoin supports time_in_force with settings \"GTC\" (good till cancelled), \"FOK\" (full-or-cancel) and \"IOC\" (immediate-or-cancel) settings.
Stoploss on Exchange
Kucoin supports stoploss_on_exchange and can use both stop-loss-market and stop-loss-limit orders. It provides great advantages, so we recommend to benefit from it. You can use either \"limit\" or \"market\" in the order_types.stoploss configuration setting to decide which type of stoploss shall be used.
For Kucoin, it is suggested to add \"KCS/<STAKE>\" to your blacklist to avoid issues, unless you are willing to maintain enough extra KCS on the account or unless you're willing to disable using KCS for fees. Kucoin accounts may use KCS for fees, and if a trade happens to be on KCS, further trades may consume this position and make the initial KCS trade unsellable as the expected amount is not there anymore.
Stoploss on Exchange
HTX supports stoploss_on_exchange and uses stop-limit orders. It provides great advantages, so we recommend to benefit from it by enabling stoploss on exchange.
OKX requires a passphrase for each api key, you will therefore need to add this key into the configuration so your exchange section looks as follows:
\"exchange\": {\n \"name\": \"okx\",\n \"key\": \"your_exchange_key\",\n \"secret\": \"your_exchange_secret\",\n \"password\": \"your_exchange_api_key_password\",\n // ...\n}\nIf you've registered with OKX on the host my.okx.com (OKX EAA)- you will need to use \"myokx\" as the exchange name. Using the wrong exchange will result in the error \"OKX Error 50119: API key doesn't exist\" - as the 2 are separate entities.
Warning
OKX only provides 100 candles per api call. Therefore, the strategy will only have a pretty low amount of data available in backtesting mode.
Futures
OKX Futures has the concept of \"position mode\" - which can be \"Buy/Sell\" or long/short (hedge mode). Freqtrade supports both modes (we recommend to use Buy/Sell mode) - but changing the mode mid-trading is not supported and will lead to exceptions and failures to place trades. OKX also only provides MARK candles for the past ~3 months. Backtesting futures prior to that date will therefore lead to slight deviations, as funding-fees cannot be calculated correctly without this data.
"},{"location":"exchanges/#gateio","title":"Gate.io","text":"Stoploss on Exchange
Gate.io supports stoploss_on_exchange and uses stop-loss-limit orders. It provides great advantages, so we recommend to benefit from it by enabling stoploss on exchange.
Gate.io supports time_in_force with settings \"GTC\" (good till cancelled), and \"IOC\" (immediate-or-cancel) settings.
Gate.io allows the use of POINT to pay for fees. As this is not a tradable currency (no regular market available), automatic fee calculations will fail (and default to a fee of 0). The configuration parameter exchange.unknown_fee_rate can be used to specify the exchange rate between Point and the stake currency. Obviously, changing the stake-currency will also require changes to this value.
Gate API keys require the following permissions on top of the market type you want to trade:
Without these permissions, the bot will not start correctly and show errors like \"permission missing\".
"},{"location":"exchanges/#bybit","title":"Bybit","text":"Stoploss on Exchange
Bybit (futures only) supports stoploss_on_exchange and uses stop-loss-limit orders. It provides great advantages, so we recommend to benefit from it by enabling stoploss on exchange. On futures, Bybit supports both stop-limit as well as stop-market orders. You can use either \"limit\" or \"market\" in the order_types.stoploss configuration setting to decide which type to use.
Bybit supports time_in_force with settings \"GTC\" (good till cancelled), \"FOK\" (full-or-cancel), \"IOC\" (immediate-or-cancel) and \"PO\" (Post only) settings.
Futures trading on bybit is currently supported for isolated futures mode.
On startup, freqtrade will set the position mode to \"One-way Mode\" for the whole (sub)account. This avoids making this call over and over again (slowing down bot operations), but means that manual changes to this setting may result in exceptions and errors.
As bybit doesn't provide funding rate history, the dry-run calculation is used for live trades as well.
API Keys for live futures trading must have the following permissions:
We do strongly recommend to limit all API keys to the IP you're going to use it from.
Unified accounts
Freqtrade assumes accounts to be dedicated to the bot. We therefore recommend the usage of one subaccount per bot. This is especially important when using unified accounts. Other configurations (multiple bots on one account, manual non-bot trades on the bot account) are not supported and may lead to unexpected behavior.
"},{"location":"exchanges/#bitmart","title":"Bitmart","text":"Bitmart requires the API key Memo (the name you give the API key) to go along with the exchange key and secret. It's therefore required to pass the UID as well.
\"exchange\": {\n \"name\": \"bitmart\",\n \"uid\": \"your_bitmart_api_key_memo\",\n \"secret\": \"your_exchange_secret\",\n \"password\": \"your_exchange_api_key_password\",\n // ...\n}\nNecessary Verification
Bitmart requires Verification Lvl2 to successfully trade on the spot market through the API - even though trading via UI works just fine with just Lvl1 verification.
"},{"location":"exchanges/#bitget","title":"Bitget","text":"Bitget requires a passphrase for each api key, you will therefore need to add this key into the configuration so your exchange section looks as follows:
\"exchange\": {\n \"name\": \"bitget\",\n \"key\": \"your_exchange_key\",\n \"secret\": \"your_exchange_secret\",\n \"password\": \"your_exchange_api_key_password\",\n // ...\n}\nBitget supports time_in_force with settings \"GTC\" (good till cancelled), \"FOK\" (full-or-cancel), \"IOC\" (immediate-or-cancel) and \"PO\" (Post only) settings.
Stoploss on Exchange
Bitget supports stoploss_on_exchange and can use both stop-loss-market and stop-loss-limit orders. It provides great advantages, so we recommend to benefit from it. You can use either \"limit\" or \"market\" in the order_types.stoploss configuration setting to decide which type of stoploss shall be used.
Stoploss on Exchange
Hyperliquid supports stoploss_on_exchange and uses stop-loss-limit orders. It provides great advantages, so we recommend to benefit from it.
Hyperliquid is a Decentralized Exchange (DEX). Decentralized exchanges work a bit different compared to normal exchanges. Instead of authenticating private API calls using an API key, private API calls need to be signed with the private key of your wallet (We recommend using an api Wallet for this, generated either on Hyperliquid or in your wallet of choice). This needs to be configured like this:
\"exchange\": {\n \"name\": \"hyperliquid\",\n \"walletAddress\": \"your_eth_wallet_address\", // This should NOT be your API Wallet Address!\n \"privateKey\": \"your_api_private_key\",\n // ...\n}\n0x<40 hex characters> - Can be easily copied from your wallet - and should be your main wallet address, not your API Wallet Address.0x<64 hex characters> - Use the key the API Wallet shows on creation.Hyperliquid handles deposits and withdrawals on the Arbitrum One chain, a Layer 2 scaling solution built on top of Ethereum. Hyperliquid uses USDC as quote / collateral. The process of depositing USDC on Hyperliquid requires a couple of steps, see how to start trading for details on what steps are needed.
Hyperliquid general usage Notes
Hyperliquid does not support market orders, however ccxt will simulate market orders by placing limit orders with a maximum slippage of 5%. Unfortunately, hyperliquid only offers 5000 historic candles, so backtesting will either need to build candles historically (by waiting and downloading the data incrementally over time) - or will be limited to the last 5000 candles.
Some general best practices (non exhaustive)
Hyperliquid allows you to create either a vault or a subaccount. To use these with Freqtrade, you will need to use the following configuration pattern:
\"exchange\": {\n \"name\": \"hyperliquid\",\n \"walletAddress\": \"your_vault_address\", // Vault or subaccount address\n \"privateKey\": \"your_api_private_key\",\n \"ccxt_config\": {\n \"options\": {\n \"vaultAddress\": \"your_vault_address\" // Optional, only if you want to use a vault or subaccount\n }\n },\n // ...\n}\nYour balance and trades will now be used from your vault / subaccount - and no longer from your main account.
"},{"location":"exchanges/#historic-hyperliquid-data","title":"Historic Hyperliquid data","text":"The Hyperliquid API does not provide historic data beyond the single call to fetch current data, so downloading data is not possible, as the downloaded data would not constitute proper historic data.
"},{"location":"exchanges/#bitvavo","title":"Bitvavo","text":"If your account is required to use an operatorId, you can set it in the configuration file as follows:
\"exchange\": {\n \"name\": \"bitvavo\",\n \"key\": \"\",\n \"secret\": \"\",\n \"ccxt_config\": {\n \"options\": {\n \"operatorId\": \"123567\"\n }\n },\n }\nBitvavo expects the operatorId to be an integer.
Should you experience constant errors with Nonce (like InvalidNonce), it is best to regenerate the API keys. Resetting Nonce is difficult and it's usually easier to regenerate the API keys.
theocean) exchange uses Web3 functionality and requires web3 python package to be installed:pip3 install web3\nMost exchanges return current incomplete candle via their OHLCV/klines API interface. By default, Freqtrade assumes that incomplete candle is fetched from the exchange and removes the last candle assuming it's the incomplete candle.
Whether your exchange returns incomplete candles or not can be checked using the helper script from the Contributor documentation.
Due to the danger of repainting, Freqtrade does not allow you to use this incomplete candle.
However, if it is based on the need for the latest price for your strategy - then this requirement can be acquired using the data provider from within the strategy.
"},{"location":"exchanges/#advanced-freqtrade-exchange-configuration","title":"Advanced Freqtrade Exchange configuration","text":"Advanced options can be configured using the _ft_has_params setting, which will override Defaults and exchange-specific behavior.
Available options are listed in the exchange-class as _ft_has_default.
For example, to test the order type FOK with Kraken, and modify candle limit to 200 (so you only get 200 candles per API call):
\"exchange\": {\n \"name\": \"kraken\",\n \"_ft_has_params\": {\n \"order_time_in_force\": [\"GTC\", \"FOK\"],\n \"ohlcv_candle_limit\": 200\n }\n //...\n}\nWarning
Please make sure to fully understand the impacts of these settings before modifying them.
"},{"location":"faq/","title":"Freqtrade FAQ","text":""},{"location":"faq/#supported-markets","title":"Supported Markets","text":"Freqtrade supports spot trading, as well as (isolated) futures trading for some selected exchanges. Please refer to the documentation start page for an up-to-date list of supported exchanges.
"},{"location":"faq/#can-my-bot-open-short-positions","title":"Can my bot open short positions?","text":"Freqtrade can open short positions in futures markets. This requires the strategy to be made for this - and \"trading_mode\": \"futures\" in the configuration. Please make sure to read the relevant documentation page first.
In spot markets, you can in some cases use leveraged spot tokens, which reflect an inverted pair (eg. BTCUP/USD, BTCDOWN/USD, ETHBULL/USD, ETHBEAR/USD,...) which can be traded with Freqtrade.
"},{"location":"faq/#can-my-bot-trade-options-or-futures","title":"Can my bot trade options or futures?","text":"Futures trading is supported for selected exchanges. Please refer to the documentation start page for an up-to-date list of supported exchanges.
"},{"location":"faq/#beginner-tips-tricks","title":"Beginner Tips & Tricks","text":"No. Freqtrade will only open one position per pair at a time. You can however use the adjust_trade_position() callback to adjust an open position.
Backtesting provides an option for this in --eps - however this is only there to highlight \"hidden\" signals, and will not work in live.
Running the bot with freqtrade trade --config config.json shows the output freqtrade: command not found.
This could be caused by the following reasons:
source .venv/bin/activate to activate the virtual environment.Make sure you set the initial_state config option to \"running\" in your config.json
I understand your disappointment but unfortunately 12 trades is just not enough to say anything. If you run backtesting, you can see that the current algorithm does leave you on the plus side, but that is after thousands of trades and even there, you will be left with losses on specific coins that you have traded tens if not hundreds of times. We of course constantly aim to improve the bot but it will always be a gamble, which should leave you with modest wins on monthly basis but you can't say much from few trades.
"},{"location":"faq/#id-like-to-make-changes-to-the-config-can-i-do-that-without-having-to-kill-the-bot","title":"I\u2019d like to make changes to the config. Can I do that without having to kill the bot?","text":"Yes. You can edit your config and use the /reload_config command to reload the configuration. The bot will stop, reload the configuration and strategy and will restart with the new configuration and strategy.
This is called \"coin dust\" and can happen on all exchanges. It happens because many exchanges subtract fees from the \"receiving currency\" - so you buy 100 COIN - but you only get 99.9 COIN. As COIN is trading in full lot sizes (1COIN steps), you cannot sell 0.9 COIN (or 99.9 COIN) - but you need to round down to 99 COIN.
This is not a bot-problem, but will also happen while manual trading.
While freqtrade can handle this (it'll sell 99 COIN), fees are often below the minimum tradable lot-size (you can only trade full COIN, not 0.9 COIN). Leaving the dust (0.9 COIN) on the exchange makes usually sense, as the next time freqtrade buys COIN, it'll eat into the remaining small balance, this time selling everything it bought, and therefore slowly declining the dust balance (although it most likely will never reach exactly 0).
Where possible (e.g. on binance), the use of the exchange's dedicated fee currency will fix this. On binance, it's sufficient to have BNB in your account, and have \"Pay fees in BNB\" enabled in your profile. Your BNB balance will slowly decline (as it's used to pay fees) - but you'll no longer encounter dust (Freqtrade will include the fees in the profit calculations). Other exchanges don't offer such possibilities, where it's simply something you'll have to accept or move to a different exchange.
"},{"location":"faq/#i-deposited-more-funds-to-the-exchange-but-my-bot-doesnt-recognize-this","title":"I deposited more funds to the exchange, but my bot doesn't recognize this","text":"Freqtrade will update the exchange balance when necessary (Before placing an order). RPC calls (Telegram's /balance, API calls to /balance) can trigger an update at max. once per hour.
If adjust_trade_position is enabled (and the bot has open trades eligible for position adjustments) - then the wallets will be refreshed once per hour. To force an immediate update, you can use /reload_config - which will restart the bot.
Freqtrade will not provide incomplete candles to strategies. Using incomplete candles will lead to repainting and consequently to strategies with \"ghost\" buys, which are impossible to both backtest, and verify after they happened.
You can use \"current\" market data by using the dataprovider's orderbook or ticker methods - which however cannot be used during backtesting.
"},{"location":"faq/#is-there-a-setting-to-only-exit-the-trades-being-held-and-not-perform-any-new-entries","title":"Is there a setting to only Exit the trades being held and not perform any new Entries?","text":"You can use the /stopentry command in Telegram to prevent future trade entry, followed by /forceexit all (sell all open trades).
Freqtrade assumes that the trades it opens are managed only though the bot. If you happen to (accidentally) sell the bot's capital, freqtrade will try to recover by trying to re-find on-exchange orders.
This is a best-effort approach, and will not work in all cases, especially when using order types that are not supported by freqtrade (OCO, iceberg, etc.), or when working with older trades (where the exchange no longer provides full order information). The exact limits will vary between exchanges - with the details usually being documented in the exchange's API documentation.
"},{"location":"faq/#i-want-to-run-multiple-bots-on-the-same-machine","title":"I want to run multiple bots on the same machine","text":"Please look at the advanced setup documentation Page.
"},{"location":"faq/#im-getting-impossible-to-load-strategy-when-starting-the-bot","title":"I'm getting \"Impossible to load Strategy\" when starting the bot","text":"This error message is shown when the bot cannot load the strategy. Usually, you can use freqtrade list-strategies to list all available strategies. The output of this command will also include a status column, showing if the strategy can be loaded.
Please check the following:
user_data/strategies directory, and has the file-ending .py?This message is just a warning that the latest candles had missing candles in them. Depending on the exchange, this can indicate that the pair didn't have a trade for the timeframe you are using - and the exchange does only return candles with volume. On low volume pairs, this is a rather common occurrence.
If this happens for all pairs in the pairlist, this might indicate a recent exchange downtime. Please check your exchange's public channels for details.
Irrespectively of the reason, Freqtrade will fill up these candles with \"empty\" candles, where open, high, low and close are set to the previous candle close - and volume is empty. In a chart, this will look like a _ - and is aligned with how exchanges usually represent 0 volume candles.
This message is a warning that the candles had a price jump of > 30%. This might be a sign that the pair stopped trading, and some token exchange took place (e.g. COCOS in 2021 - where price jumped from 0.0000154 to 0.01621). This message is often accompanied by \"Missing data fillup\" - as trading on such pairs is often stopped for some time.
"},{"location":"faq/#i-want-to-reset-the-bots-database","title":"I want to reset the bot's database","text":"To reset the bot's database, you can either delete the database (by default tradesv3.sqlite or tradesv3.dryrun.sqlite), or use a different database url via --db-url (e.g. sqlite:///mynewdatabase.sqlite).
The bot is trying to tell you that it got an outdated last candle (not the last complete candle). As a consequence, Freqtrade will not enter a trade for this pair - as trading on old information is usually not what is desired.
This warning can point to one of the below problems:
This is an informational message that the bot tried to use candles from the websocket, but the exchange didn't provide the right information. This can happen if there was an interruption to the websocket connection - or if the pair didn't have any trades happen in the timeframe you are using.
Freqtrade will handle this gracefully by falling back to the REST api. While this makes the iteration slightly slower (due to the REST Api call) - it will not cause any problems to the bot's operation.
"},{"location":"faq/#im-getting-the-exchange-xxx-does-not-support-market-orders-message-and-cannot-run-my-strategy","title":"I'm getting the \"Exchange XXX does not support market orders.\" message and cannot run my strategy","text":"As the message says, your exchange does not support market orders and you have one of the order types set to \"market\". Your strategy was probably written with other exchanges in mind and sets \"market\" orders for \"stoploss\" orders, which is correct and preferable for most of the exchanges supporting market orders (but not for Gate.io).
To fix this, redefine order types in the strategy to use \"limit\" instead of \"market\":
order_types = {\n ...\n \"stoploss\": \"limit\",\n ...\n }\nThe same fix should be applied in the configuration file, if order types are defined in your custom config rather than in the strategy.
"},{"location":"faq/#im-trying-to-start-the-bot-live-but-get-an-api-permission-error","title":"I'm trying to start the bot live, but get an API permission error","text":"Errors like Invalid API-key, IP, or permissions for action mean exactly what they actually say. Your API key is either invalid (copy/paste error? check for leading/trailing spaces in the config), expired, or the IP you're running the bot from is not enabled in the Exchange's API console. Usually, the permission \"Spot Trading\" (or the equivalent in the exchange you use) will be necessary. Futures will usually have to be enabled specifically.
By default, the bot writes its log into stderr stream. This is implemented this way so that you can easily separate the bot's diagnostics messages from Backtesting, Edge and Hyperopt results, output from other various Freqtrade utility sub-commands, as well as from the output of your custom print()'s you may have inserted into your strategy. So if you need to search the log messages with the grep utility, you need to redirect stderr to stdout and disregard stdout.
$ freqtrade --some-options 2>&1 >/dev/null | grep 'something'\n2>&1 and >/dev/null should be written in this order)$ freqtrade --some-options 2> >(grep 'something') >/dev/null\n$ freqtrade --some-options 2> >(grep -v 'something' 1>&2)\n--logfile option: $ freqtrade --logfile /path/to/mylogfile.log --some-options\n$ cat /path/to/mylogfile.log | grep 'something'\n$ tail -f /path/to/mylogfile.log | grep 'something'\nOn Windows, the --logfile option is also supported by Freqtrade and you can use the findstr command to search the log for the string of interest:
> type \\path\\to\\mylogfile.log | findstr \"something\"\nFirst of all, most indicator libraries don't have GPU support - as such, there would be little benefit for indicator calculations. The GPU improvements would only apply to pandas-native calculations - or ones written by yourself.
GPU's are only good at crunching numbers (floating point operations). For hyperopt, we need both number-crunching (find next parameters) and running python code (running backtesting). As such, GPU's are not too well suited for most parts of hyperopt.
The benefit of using GPU would therefore be pretty slim - and will not justify the complexity introduced by trying to add GPU support.
There is however nothing preventing you from using GPU-enabled indicators within your strategy if you think you must have this - you will however probably be disappointed by the slim gain that will give you (compared to the complexity).
"},{"location":"faq/#how-many-epochs-do-i-need-to-get-a-good-hyperopt-result","title":"How many epochs do I need to get a good Hyperopt result?","text":"Per default Hyperopt called without the -e/--epochs command line option will only run 100 epochs, means 100 evaluations of your triggers, guards, ... Too few to find a great result (unless if you are very lucky), so you probably have to run it for 10000 or more. But it will take an eternity to compute.
Since hyperopt uses Bayesian search, running for too many epochs may not produce greater results.
It's therefore recommended to run between 500-1000 epochs over and over until you hit at least 10000 epochs in total (or are satisfied with the result). You can best judge by looking at the results - if the bot keeps discovering better strategies, it's best to keep on going.
freqtrade hyperopt --hyperopt-loss SharpeHyperOptLossDaily --strategy SampleStrategy -e 1000\nThis answer was written during the release 0.15.1, when we had:
The following calculation is still very rough and not very precise but it will give the idea. With only these triggers and guards there is already 8*10^9*10 evaluations. A roughly total of 80 billion evaluations. Did you run 100 000 evaluations? Congrats, you've done roughly 1 / 100 000 th of the search space, assuming that the bot never tests the same parameters more than once.
Example: 4% profit 650 times vs 0,3% profit a trade 10000 times in a year. If we assume you set the --timerange to 365 days.
Example: freqtrade --config config.json --strategy SampleStrategy --hyperopt SampleHyperopt -e 1000 --timerange 20190601-20200601
Freqtrade is using exclusively the following official channels:
Nobody affiliated with the freqtrade project will ask you about your exchange keys or anything else exposing your funds to exploitation. Should you be asked to expose your exchange keys or send funds to some random wallet, then please don't follow these instructions.
Failing to follow these guidelines will not be responsibility of freqtrade.
"},{"location":"faq/#support-policy","title":"Support policy","text":"We provide free support for Freqtrade on our Discord server and via GitHub issues. We only support the most recent release (e.g. 2025.8) and the current development branch (e.g. 2025.9-dev).
If you're on an older version, please follow the upgrade instructions and see if your problem has already been addressed.
"},{"location":"faq/#freqtrade-token","title":"\"Freqtrade token\"","text":"Freqtrade does not have a Crypto token offering.
Token offerings you find on the internet referring Freqtrade, FreqAI or freqUI must be considered to be a scam, trying to exploit freqtrade's popularity for their own, nefarious gains.
"},{"location":"freq-ui/","title":"FreqUI","text":"Freqtrade provides a builtin webserver, which can serve FreqUI, the freqtrade frontend.
By default, the UI is automatically installed as part of the installation (script, docker). freqUI can also be manually installed by using the freqtrade install-ui command. This same command can also be used to update freqUI to new releases.
Once the bot is started in trade / dry-run mode (with freqtrade trade) - the UI will be available under the configured API port (by default http://127.0.0.1:8080).
Developers should not use this method, but instead clone the corresponding use the method described in the freqUI repository to get the source-code of freqUI. A working installation of node will be required to build the frontend.
freqUI is not required to run freqtrade
freqUI is an optional component of freqtrade, and is not required to run the bot. It is a frontend that can be used to monitor the bot and to interact with it - but freqtrade itself will work perfectly fine without it.
"},{"location":"freq-ui/#configuration","title":"Configuration","text":"FreqUI does not have it's own configuration file - but assumes a working setup for the rest-api is available. Please refer to the corresponding documentation page to get setup with freqUI
"},{"location":"freq-ui/#ui","title":"UI","text":"FreqUI is a modern, responsive web application that can be used to monitor and interact with your bot.
FreqUI provides a light, as well as a dark theme. Themes can be easily switched via a prominent button at the top of the page. The theme of the screenshots on this page will adapt to the selected documentation Theme, so to see the dark (or light) version, please switch the theme of the Documentation.
"},{"location":"freq-ui/#login","title":"Login","text":"The below screenshot shows the login screen of freqUI.
CORS
The Cors error shown in this screenshot is due to the fact that the UI is running on a different port than the API, and CORS has not been setup correctly yet.
"},{"location":"freq-ui/#trade-view","title":"Trade view","text":"The trade view allows you to visualize the trades that the bot is making and to interact with the bot. On this page, you can also interact with the bot by starting and stopping it and - if configured - force trade entries and exits.
"},{"location":"freq-ui/#plot-configurator","title":"Plot Configurator","text":"
FreqUI Plots can be configured either via a plot_config configuration object in the strategy (which can be loaded via \"from strategy\" button) or via the UI. Multiple plot configurations can be created and switched at will - allowing for flexible, different views into your charts.
The plot configuration can be accessed via the \"Plot Configurator\" (Cog icon) button in the top right corner of the trade view.
"},{"location":"freq-ui/#settings","title":"Settings","text":"
Several UI related settings can be changed by accessing the settings page.
Things you can change (among others):
"},{"location":"freq-ui/#webserver-mode","title":"Webserver mode","text":"
when freqtrade is started in webserver mode (freqtrade started with freqtrade webserver), the webserver will start in a special mode allowing for additional features, for example:
When freqtrade is started in webserver mode (freqtrade started with freqtrade webserver), the backtesting view becomes available. This view allows you to backtest strategies and visualize the results.
You can also load and visualize previous backtest results, as well as compare the results with each other.
"},{"location":"freq-ui/#cors","title":"CORS","text":"
This whole section is only necessary in cross-origin cases (where you multiple bot API's running on localhost:8081, localhost:8082, ...), and want to combine them into one FreqUI instance.
All web-based front-ends are subject to CORS - Cross-Origin Resource Sharing. Since most of the requests to the Freqtrade API must be authenticated, a proper CORS policy is key to avoid security problems. Also, the standard disallows * CORS policies for requests with credentials, so this setting must be set appropriately.
Users can allow access from different origin URL's to the bot API via the CORS_origins configuration setting. It consists of a list of allowed URL's that are allowed to consume resources from the bot's API.
Assuming your application is deployed as https://frequi.freqtrade.io/home/ - this would mean that the following configuration becomes necessary:
{\n //...\n \"jwt_secret_key\": \"somethingrandom\",\n \"CORS_origins\": [\"https://frequi.freqtrade.io\"],\n //...\n}\nIn the following (pretty common) case, FreqUI is accessible on http://localhost:8080/trade (this is what you see in your navbar when navigating to freqUI).
The correct configuration for this case is http://localhost:8080 - the main part of the URL including the port.
{\n //...\n \"jwt_secret_key\": \"somethingrandom\",\n \"CORS_origins\": [\"http://localhost:8080\"],\n //...\n}\ntrailing Slash
The trailing slash is not allowed in the CORS_origins configuration (e.g. \"http://localhots:8080/\"). Such a configuration will not take effect, and the cors errors will remain.
Note
We strongly recommend to also set jwt_secret_key to something random and known only to yourself to avoid unauthorized access to your bot.
FreqAI is configured through the typical Freqtrade config file and the standard Freqtrade strategy. Examples of FreqAI config and strategy files can be found in config_examples/config_freqai.example.json and freqtrade/templates/FreqaiExampleStrategy.py, respectively.
Although there are plenty of additional parameters to choose from, as highlighted in the parameter table, a FreqAI config must at minimum include the following parameters (the parameter values are only examples):
\"freqai\": {\n \"enabled\": true,\n \"purge_old_models\": 2,\n \"train_period_days\": 30,\n \"backtest_period_days\": 7,\n \"identifier\" : \"unique-id\",\n \"feature_parameters\" : {\n \"include_timeframes\": [\"5m\",\"15m\",\"4h\"],\n \"include_corr_pairlist\": [\n \"ETH/USD\",\n \"LINK/USD\",\n \"BNB/USD\"\n ],\n \"label_period_candles\": 24,\n \"include_shifted_candles\": 2,\n \"indicator_periods_candles\": [10, 20]\n },\n \"data_split_parameters\" : {\n \"test_size\": 0.25\n }\n }\nA full example config is available in config_examples/config_freqai.example.json.
Note
The identifier is commonly overlooked by newcomers, however, this value plays an important role in your configuration. This value is a unique ID that you choose to describe one of your runs. Keeping it the same allows you to maintain crash resilience as well as faster backtesting. As soon as you want to try a new run (new features, new model, etc.), you should change this value (or delete the user_data/models/unique-id folder. More details available in the parameter table.
The FreqAI strategy requires including the following lines of code in the standard Freqtrade strategy:
# user should define the maximum startup candle count (the largest number of candles\n # passed to any single indicator)\n startup_candle_count: int = 20\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n\n # the model will return all labels created by user in `set_freqai_targets()`\n # (& appended targets), an indication of whether or not the prediction should be accepted,\n # the target mean/std values for each of the labels created by user in\n # `set_freqai_targets()` for each training period.\n\n dataframe = self.freqai.start(dataframe, metadata, self)\n\n return dataframe\n\n def feature_engineering_expand_all(self, dataframe: DataFrame, period, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This function will automatically expand the defined features on the config defined\n `indicator_periods_candles`, `include_timeframes`, `include_shifted_candles`, and\n `include_corr_pairs`. In other words, a single feature defined in this function\n will automatically expand to a total of\n `indicator_periods_candles` * `include_timeframes` * `include_shifted_candles` *\n `include_corr_pairs` numbers of features added to the model.\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n :param df: strategy dataframe which will receive the features\n :param period: period of the indicator - usage example:\n dataframe[\"%-ema-period\"] = ta.EMA(dataframe, timeperiod=period)\n \"\"\"\n\n dataframe[\"%-rsi-period\"] = ta.RSI(dataframe, timeperiod=period)\n dataframe[\"%-mfi-period\"] = ta.MFI(dataframe, timeperiod=period)\n dataframe[\"%-adx-period\"] = ta.ADX(dataframe, timeperiod=period)\n dataframe[\"%-sma-period\"] = ta.SMA(dataframe, timeperiod=period)\n dataframe[\"%-ema-period\"] = ta.EMA(dataframe, timeperiod=period)\n\n return dataframe\n\n def feature_engineering_expand_basic(self, dataframe: DataFrame, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This function will automatically expand the defined features on the config defined\n `include_timeframes`, `include_shifted_candles`, and `include_corr_pairs`.\n In other words, a single feature defined in this function\n will automatically expand to a total of\n `include_timeframes` * `include_shifted_candles` * `include_corr_pairs`\n numbers of features added to the model.\n\n Features defined here will *not* be automatically duplicated on user defined\n `indicator_periods_candles`\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n :param df: strategy dataframe which will receive the features\n dataframe[\"%-pct-change\"] = dataframe[\"close\"].pct_change()\n dataframe[\"%-ema-200\"] = ta.EMA(dataframe, timeperiod=200)\n \"\"\"\n dataframe[\"%-pct-change\"] = dataframe[\"close\"].pct_change()\n dataframe[\"%-raw_volume\"] = dataframe[\"volume\"]\n dataframe[\"%-raw_price\"] = dataframe[\"close\"]\n return dataframe\n\n def feature_engineering_standard(self, dataframe: DataFrame, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This optional function will be called once with the dataframe of the base timeframe.\n This is the final function to be called, which means that the dataframe entering this\n function will contain all the features and columns created by all other\n freqai_feature_engineering_* functions.\n\n This function is a good place to do custom exotic feature extractions (e.g. tsfresh).\n This function is a good place for any feature that should not be auto-expanded upon\n (e.g. day of the week).\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n :param df: strategy dataframe which will receive the features\n usage example: dataframe[\"%-day_of_week\"] = (dataframe[\"date\"].dt.dayofweek + 1) / 7\n \"\"\"\n dataframe[\"%-day_of_week\"] = (dataframe[\"date\"].dt.dayofweek + 1) / 7\n dataframe[\"%-hour_of_day\"] = (dataframe[\"date\"].dt.hour + 1) / 25\n return dataframe\n\n def set_freqai_targets(self, dataframe: DataFrame, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n Required function to set the targets for the model.\n All targets must be prepended with `&` to be recognized by the FreqAI internals.\n\n :param df: strategy dataframe which will receive the targets\n usage example: dataframe[\"&-target\"] = dataframe[\"close\"].shift(-1) / dataframe[\"close\"]\n \"\"\"\n dataframe[\"&-s_close\"] = (\n dataframe[\"close\"]\n .shift(-self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .rolling(self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .mean()\n / dataframe[\"close\"]\n - 1\n )\n return dataframe\nNotice how the feature_engineering_*() is where features are added. Meanwhile set_freqai_targets() adds the labels/targets. A full example strategy is available in templates/FreqaiExampleStrategy.py.
Note
The self.freqai.start() function cannot be called outside the populate_indicators().
Note
Features must be defined in feature_engineering_*(). Defining FreqAI features in populate_indicators() will cause the algorithm to fail in live/dry mode. In order to add generalized features that are not associated with a specific pair or timeframe, you should use feature_engineering_standard() (as exemplified in freqtrade/templates/FreqaiExampleStrategy.py).
Below are the values you can expect to include/use inside a typical strategy dataframe (df[]):
df['&*'] Any dataframe column prepended with & in set_freqai_targets() is treated as a training target (label) inside FreqAI (typically following the naming convention &-s*). For example, to predict the close price 40 candles into the future, you would set df['&-s_close'] = df['close'].shift(-self.freqai_info[\"feature_parameters\"][\"label_period_candles\"]) with \"label_period_candles\": 40 in the config. FreqAI makes the predictions and gives them back under the same key (df['&-s_close']) to be used in populate_entry/exit_trend(). Datatype: Depends on the output of the model. df['&*_std/mean'] Standard deviation and mean values of the defined labels during training (or live tracking with fit_live_predictions_candles). Commonly used to understand the rarity of a prediction (use the z-score as shown in templates/FreqaiExampleStrategy.py and explained here to evaluate how often a particular prediction was observed during training or historically with fit_live_predictions_candles). Datatype: Float. df['do_predict'] Indication of an outlier data point. The return value is integer between -2 and 2, which lets you know if the prediction is trustworthy or not. do_predict==1 means that the prediction is trustworthy. If the Dissimilarity Index (DI, see details here) of the input data point is above the threshold defined in the config, FreqAI will subtract 1 from do_predict, resulting in do_predict==0. If use_SVM_to_remove_outliers is active, the Support Vector Machine (SVM, see details here) may also detect outliers in training and prediction data. In this case, the SVM will also subtract 1 from do_predict. If the input data point was considered an outlier by the SVM but not by the DI, or vice versa, the result will be do_predict==0. If both the DI and the SVM considers the input data point to be an outlier, the result will be do_predict==-1. As with the SVM, if use_DBSCAN_to_remove_outliers is active, DBSCAN (see details here) may also detect outliers and subtract 1 from do_predict. Hence, if both the SVM and DBSCAN are active and identify a datapoint that was above the DI threshold as an outlier, the result will be do_predict==-2. A particular case is when do_predict == 2, which means that the model has expired due to exceeding expired_hours. Datatype: Integer between -2 and 2. df['DI_values'] Dissimilarity Index (DI) values are proxies for the level of confidence FreqAI has in the prediction. A lower DI means the prediction is close to the training data, i.e., higher prediction confidence. See details about the DI here. Datatype: Float. df['%*'] Any dataframe column prepended with % in feature_engineering_*() is treated as a training feature. For example, you can include the RSI in the training feature set (similar to in templates/FreqaiExampleStrategy.py) by setting df['%-rsi']. See more details on how this is done here. Note: Since the number of features prepended with % can multiply very quickly (10s of thousands of features are easily engineered using the multiplictative functionality of, e.g., include_shifted_candles and include_timeframes as described in the parameter table), these features are removed from the dataframe that is returned from FreqAI to the strategy. To keep a particular type of feature for plotting purposes, you would prepend it with %% (see details below). Datatype: Depends on the feature created by the user. df['%%*'] Any dataframe column prepended with %% in feature_engineering_*() is treated as a training feature, just the same as the above % prepend. However, in this case, the features are returned back to the strategy for FreqUI/plot-dataframe plotting and monitoring in Dry/Live/Backtesting Datatype: Depends on the feature created by the user. Please note that features created in feature_engineering_expand() will have automatic FreqAI naming schemas depending on the expansions that you configured (i.e. include_timeframes, include_corr_pairlist, indicators_periods_candles, include_shifted_candles). So if you want to plot %%-rsi from feature_engineering_expand_all(), the final naming scheme for your plotting config would be: %%-rsi-period_10_ETH/USDT:USDT_1h for the rsi feature with period=10, timeframe=1h, and pair=ETH/USDT:USDT (the :USDT is added if you are using futures pairs). It is useful to simply add print(dataframe.columns) in your populate_indicators() after self.freqai.start() to see the full list of available features that are returned to the strategy for plotting purposes."},{"location":"freqai-configuration/#setting-the-startup_candle_count","title":"Setting the startup_candle_count","text":"The startup_candle_count in the FreqAI strategy needs to be set up in the same way as in the standard Freqtrade strategy (see details here). This value is used by Freqtrade to ensure that a sufficient amount of data is provided when calling the dataprovider, to avoid any NaNs at the beginning of the first training. You can easily set this value by identifying the longest period (in candle units) which is passed to the indicator creation functions (e.g., TA-Lib functions). In the presented example, startup_candle_count is 20 since this is the maximum value in indicators_periods_candles.
Note
There are instances where the TA-Lib functions actually require more data than just the passed period or else the feature dataset gets populated with NaNs. Anecdotally, multiplying the startup_candle_count by 2 always leads to a fully NaN free training dataset. Hence, it is typically safest to multiply the expected startup_candle_count by 2. Look out for this log message to confirm that the data is clean:
2022-08-31 15:14:04 - freqtrade.freqai.data_kitchen - INFO - dropped 0 training points due to NaNs in populated dataset 4319.\nDeciding when to enter or exit a trade can be done in a dynamic way to reflect current market conditions. FreqAI allows you to return additional information from the training of a model (more info here). For example, the &*_std/mean return values describe the statistical distribution of the target/label during the most recent training. Comparing a given prediction to these values allows you to know the rarity of the prediction. In templates/FreqaiExampleStrategy.py, the target_roi and sell_roi are defined to be 1.25 z-scores away from the mean which causes predictions that are closer to the mean to be filtered out.
dataframe[\"target_roi\"] = dataframe[\"&-s_close_mean\"] + dataframe[\"&-s_close_std\"] * 1.25\ndataframe[\"sell_roi\"] = dataframe[\"&-s_close_mean\"] - dataframe[\"&-s_close_std\"] * 1.25\nTo consider the population of historical predictions for creating the dynamic target instead of information from the training as discussed above, you would set fit_live_predictions_candles in the config to the number of historical prediction candles you wish to use to generate target statistics.
\"freqai\": {\n \"fit_live_predictions_candles\": 300,\n }\nIf this value is set, FreqAI will initially use the predictions from the training data and subsequently begin introducing real prediction data as it is generated. FreqAI will save this historical data to be reloaded if you stop and restart a model with the same identifier.
FreqAI has multiple example prediction model libraries that are ready to be used as is via the flag --freqaimodel. These libraries include CatBoost, LightGBM, and XGBoost regression, classification, and multi-target models, and can be found in freqai/prediction_models/.
Regression and classification models differ in what targets they predict - a regression model will predict a target of continuous values, for example what price BTC will be at tomorrow, whilst a classifier will predict a target of discrete values, for example if the price of BTC will go up tomorrow or not. This means that you have to specify your targets differently depending on which model type you are using (see details below).
All of the aforementioned model libraries implement gradient boosted decision tree algorithms. They all work on the principle of ensemble learning, where predictions from multiple simple learners are combined to get a final prediction that is more stable and generalized. The simple learners in this case are decision trees. Gradient boosting refers to the method of learning, where each simple learner is built in sequence - the subsequent learner is used to improve on the error from the previous learner. If you want to learn more about the different model libraries you can find the information in their respective docs:
There are also numerous online articles describing and comparing the algorithms. Some relatively lightweight examples would be CatBoost vs. LightGBM vs. XGBoost \u2014 Which is the best algorithm? and XGBoost, LightGBM or CatBoost \u2014 which boosting algorithm should I use?. Keep in mind that the performance of each model is highly dependent on the application and so any reported metrics might not be true for your particular use of the model.
Apart from the models already available in FreqAI, it is also possible to customize and create your own prediction models using the IFreqaiModel class. You are encouraged to inherit fit(), train(), and predict() to customize various aspects of the training procedures. You can place custom FreqAI models in user_data/freqaimodels - and freqtrade will pick them up from there based on the provided --freqaimodel name - which has to correspond to the class name of your custom model. Make sure to use unique names to avoid overriding built-in models.
If you are using a regressor, you need to specify a target that has continuous values. FreqAI includes a variety of regressors, such as the CatboostRegressorvia the flag --freqaimodel CatboostRegressor. An example of how you could set a regression target for predicting the price 100 candles into the future would be
df['&s-close_price'] = df['close'].shift(-100)\nIf you want to predict multiple targets, you need to define multiple labels using the same syntax as shown above.
"},{"location":"freqai-configuration/#classifiers","title":"Classifiers","text":"If you are using a classifier, you need to specify a target that has discrete values. FreqAI includes a variety of classifiers, such as the CatboostClassifier via the flag --freqaimodel CatboostClassifier. If you elects to use a classifier, the classes need to be set using strings. For example, if you want to predict if the price 100 candles into the future goes up or down you would set
df['&s-up_or_down'] = np.where( df[\"close\"].shift(-100) > df[\"close\"], 'up', 'down')\nIf you want to predict multiple targets you must specify all labels in the same label column. You could, for example, add the label same to define where the price was unchanged by setting
df['&s-up_or_down'] = np.where( df[\"close\"].shift(-100) > df[\"close\"], 'up', 'down')\ndf['&s-up_or_down'] = np.where( df[\"close\"].shift(-100) == df[\"close\"], 'same', df['&s-up_or_down'])\nThe easiest way to quickly run a pytorch model is with the following command (for regression task):
freqtrade trade --config config_examples/config_freqai.example.json --strategy FreqaiExampleStrategy --freqaimodel PyTorchMLPRegressor --strategy-path freqtrade/templates \nInstallation/docker
The PyTorch module requires large packages such as torch, which should be explicitly requested during ./setup.sh -i by answering \"y\" to the question \"Do you also want dependencies for freqai-rl or PyTorch (~700mb additional space required) [y/N]?\". Users who prefer docker should ensure they use the docker image appended with _freqaitorch. We do provide an explicit docker-compose file for this in docker/docker-compose-freqai.yml - which can be used via docker compose -f docker/docker-compose-freqai.yml run ... - or can be copied to replace the original docker file. This docker-compose file also contains a (disabled) section to enable GPU resources within docker containers. This obviously assumes the system has GPU resources available.
PyTorch dropped support for macOS x64 (intel based Apple devices) in version 2.3. Subsequently, freqtrade also dropped support for PyTorch on this platform.
"},{"location":"freqai-configuration/#structure","title":"Structure","text":""},{"location":"freqai-configuration/#model","title":"Model","text":"You can construct your own Neural Network architecture in PyTorch by simply defining your nn.Module class inside your custom IFreqaiModel file and then using that class in your def train() function. Here is an example of logistic regression model implementation using PyTorch (should be used with nn.BCELoss criterion) for classification tasks.
class LogisticRegression(nn.Module):\n def __init__(self, input_size: int):\n super().__init__()\n # Define your layers\n self.linear = nn.Linear(input_size, 1)\n self.activation = nn.Sigmoid()\n\n def forward(self, x: torch.Tensor) -> torch.Tensor:\n # Define the forward pass\n out = self.linear(x)\n out = self.activation(out)\n return out\n\nclass MyCoolPyTorchClassifier(BasePyTorchClassifier):\n \"\"\"\n This is a custom IFreqaiModel showing how a user might setup their own \n custom Neural Network architecture for their training.\n \"\"\"\n\n @property\n def data_convertor(self) -> PyTorchDataConvertor:\n return DefaultPyTorchDataConvertor(target_tensor_type=torch.float)\n\n def __init__(self, **kwargs) -> None:\n super().__init__(**kwargs)\n config = self.freqai_info.get(\"model_training_parameters\", {})\n self.learning_rate: float = config.get(\"learning_rate\", 3e-4)\n self.model_kwargs: dict[str, Any] = config.get(\"model_kwargs\", {})\n self.trainer_kwargs: dict[str, Any] = config.get(\"trainer_kwargs\", {})\n\n def fit(self, data_dictionary: dict, dk: FreqaiDataKitchen, **kwargs) -> Any:\n \"\"\"\n User sets up the training and test data to fit their desired model here\n :param data_dictionary: the dictionary holding all data for train, test,\n labels, weights\n :param dk: The datakitchen object for the current coin/model\n \"\"\"\n\n class_names = self.get_class_names()\n self.convert_label_column_to_int(data_dictionary, dk, class_names)\n n_features = data_dictionary[\"train_features\"].shape[-1]\n model = LogisticRegression(\n input_dim=n_features\n )\n model.to(self.device)\n optimizer = torch.optim.AdamW(model.parameters(), lr=self.learning_rate)\n criterion = torch.nn.CrossEntropyLoss()\n init_model = self.get_init_model(dk.pair)\n trainer = PyTorchModelTrainer(\n model=model,\n optimizer=optimizer,\n criterion=criterion,\n model_meta_data={\"class_names\": class_names},\n device=self.device,\n init_model=init_model,\n data_convertor=self.data_convertor,\n **self.trainer_kwargs,\n )\n trainer.fit(data_dictionary, self.splits)\n return trainer\nThe PyTorchModelTrainer performs the idiomatic PyTorch train loop: Define our model, loss function, and optimizer, and then move them to the appropriate device (GPU or CPU). Inside the loop, we iterate through the batches in the dataloader, move the data to the device, compute the prediction and loss, backpropagate, and update the model parameters using the optimizer.
In addition, the trainer is responsible for the following: - saving and loading the model - converting the data from pandas.DataFrame to torch.Tensor.
Like all freqai models, PyTorch models inherit IFreqaiModel. IFreqaiModel declares three abstract methods: train, fit, and predict. we implement these methods in three levels of hierarchy. From top to bottom:
BasePyTorchModel - Implements the train method. all BasePyTorch* inherit it. responsible for general data preparation (e.g., data normalization) and calling the fit method. Sets device attribute used by children classes. Sets model_type attribute used by the parent class.BasePyTorch* - Implements the predict method. Here, the * represents a group of algorithms, such as classifiers or regressors. responsible for data preprocessing, predicting, and postprocessing if needed.PyTorch*Classifier / PyTorch*Regressor - implements the fit method. responsible for the main train flaw, where we initialize the trainer and model objects.Building a PyTorch regressor using MLP (multilayer perceptron) model, MSELoss criterion, and AdamW optimizer.
class PyTorchMLPRegressor(BasePyTorchRegressor):\n def __init__(self, **kwargs) -> None:\n super().__init__(**kwargs)\n config = self.freqai_info.get(\"model_training_parameters\", {})\n self.learning_rate: float = config.get(\"learning_rate\", 3e-4)\n self.model_kwargs: dict[str, Any] = config.get(\"model_kwargs\", {})\n self.trainer_kwargs: dict[str, Any] = config.get(\"trainer_kwargs\", {})\n\n def fit(self, data_dictionary: dict, dk: FreqaiDataKitchen, **kwargs) -> Any:\n n_features = data_dictionary[\"train_features\"].shape[-1]\n model = PyTorchMLPModel(\n input_dim=n_features,\n output_dim=1,\n **self.model_kwargs\n )\n model.to(self.device)\n optimizer = torch.optim.AdamW(model.parameters(), lr=self.learning_rate)\n criterion = torch.nn.MSELoss()\n init_model = self.get_init_model(dk.pair)\n trainer = PyTorchModelTrainer(\n model=model,\n optimizer=optimizer,\n criterion=criterion,\n device=self.device,\n init_model=init_model,\n target_tensor_type=torch.float,\n **self.trainer_kwargs,\n )\n trainer.fit(data_dictionary)\n return trainer\nHere we create a PyTorchMLPRegressor class that implements the fit method. The fit method specifies the training building blocks: model, optimizer, criterion, and trainer. We inherit both BasePyTorchRegressor and BasePyTorchModel, where the former implements the predict method that is suitable for our regression task, and the latter implements the train method.
When using classifiers, the user must declare the class names (or targets) by overriding the IFreqaiModel.class_names attribute. This is achieved by setting self.freqai.class_names in the FreqAI strategy inside the set_freqai_targets method.
For example, if you are using a binary classifier to predict price movements as up or down, you can set the class names as follows:
def set_freqai_targets(self, dataframe: DataFrame, metadata: dict, **kwargs) -> DataFrame:\n self.freqai.class_names = [\"down\", \"up\"]\n dataframe['&s-up_or_down'] = np.where(dataframe[\"close\"].shift(-100) >\n dataframe[\"close\"], 'up', 'down')\n\n return dataframe\ntorch.compile()","text":"Torch provides a torch.compile() method that can be used to improve performance for specific GPU hardware. More details can be found here. In brief, you simply wrap your model in torch.compile():
model = PyTorchMLPModel(\n input_dim=n_features,\n output_dim=1,\n **self.model_kwargs\n )\n model.to(self.device)\n model = torch.compile(model)\nThen proceed to use the model as normal. Keep in mind that doing this will remove eager execution, which means errors and tracebacks will not be informative.
"},{"location":"freqai-developers/","title":"Development","text":""},{"location":"freqai-developers/#project-architecture","title":"Project architecture","text":"The architecture and functions of FreqAI are generalized to encourages development of unique features, functions, models, etc.
The class structure and a detailed algorithmic overview is depicted in the following diagram:
As shown, there are three distinct objects comprising FreqAI:
There are a variety of built-in prediction models which inherit directly from IFreqaiModel. Each of these models have full access to all methods in IFreqaiModel and can therefore override any of those functions at will. However, advanced users will likely stick to overriding fit(), train(), predict(), and data_cleaning_train/predict().
FreqAI aims to organize model files, prediction data, and meta data in a way that simplifies post-processing and enhances crash resilience by automatic data reloading. The data is saved in a file structure,user_data_dir/models/, which contains all the data associated with the trainings and backtests. The FreqaiDataKitchen() relies heavily on the file structure for proper training and inferencing and should therefore not be manually modified.
The file structure is automatically generated based on the model identifier set in the config. The following structure shows where the data is stored for post processing:
config_*.json A copy of the model specific configuration file. historic_predictions.pkl A file containing all historic predictions generated during the lifetime of the identifier model during live deployment. historic_predictions.pkl is used to reload the model after a crash or a config change. A backup file is always held in case of corruption on the main file. FreqAI automatically detects corruption and replaces the corrupted file with the backup. pair_dictionary.json A file containing the training queue as well as the on disk location of the most recently trained model. sub-train-*_TIMESTAMP A folder containing all the files associated with a single model, such as: *_metadata.json - Metadata for the model, such as normalization max/min, expected training feature list, etc. *_model.* - The model file saved to disk for reloading from a crash. Can be joblib (typical boosting libs), zip (stable_baselines), hd5 (keras type), etc. *_pca_object.pkl - The Principal component analysis (PCA) transform (if principal_component_analysis: True is set in the config) which will be used to transform unseen prediction features. *_svm_model.pkl - The Support Vector Machine (SVM) model (if use_SVM_to_remove_outliers: True is set in the config) which is used to detect outliers in unseen prediction features. *_trained_df.pkl - The dataframe containing all the training features used to train the identifier model. This is used for computing the Dissimilarity Index (DI) and can also be used for post-processing. *_trained_dates.df.pkl - The dates associated with the trained_df.pkl, which is useful for post-processing. The example file structure would look like this:
\u251c\u2500\u2500 models\n\u2502\u00a0\u00a0 \u2514\u2500\u2500 unique-id\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 config_freqai.example.json\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 historic_predictions.backup.pkl\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 historic_predictions.pkl\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 pair_dictionary.json\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 sub-train-1INCH_1662821319\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821319_metadata.json\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821319_model.joblib\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821319_pca_object.pkl\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821319_svm_model.joblib\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821319_trained_dates_df.pkl\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u2514\u2500\u2500 cb_1inch_1662821319_trained_df.pkl\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 sub-train-1INCH_1662821371\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821371_metadata.json\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821371_model.joblib\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821371_pca_object.pkl\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821371_svm_model.joblib\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_1inch_1662821371_trained_dates_df.pkl\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u2514\u2500\u2500 cb_1inch_1662821371_trained_df.pkl\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 sub-train-ADA_1662821344\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821344_metadata.json\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821344_model.joblib\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821344_pca_object.pkl\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821344_svm_model.joblib\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821344_trained_dates_df.pkl\n\u2502\u00a0\u00a0 \u2502\u00a0\u00a0 \u2514\u2500\u2500 cb_ada_1662821344_trained_df.pkl\n\u2502\u00a0\u00a0 \u2514\u2500\u2500 sub-train-ADA_1662821399\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821399_metadata.json\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821399_model.joblib\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821399_pca_object.pkl\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821399_svm_model.joblib\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 cb_ada_1662821399_trained_dates_df.pkl\n\u2502\u00a0\u00a0 \u2514\u2500\u2500 cb_ada_1662821399_trained_df.pkl\nLow level feature engineering is performed in the user strategy within a set of functions called feature_engineering_*. These function set the base features such as, RSI, MFI, EMA, SMA, time of day, volume, etc. The base features can be custom indicators or they can be imported from any technical-analysis library that you can find. FreqAI is equipped with a set of functions to simplify rapid large-scale feature engineering:
feature_engineering_expand_all() This optional function will automatically expand the defined features on the config defined indicator_periods_candles, include_timeframes, include_shifted_candles, and include_corr_pairs. feature_engineering_expand_basic() This optional function will automatically expand the defined features on the config defined include_timeframes, include_shifted_candles, and include_corr_pairs. Note: this function does not expand across indicator_periods_candles. feature_engineering_standard() This optional function will be called once with the dataframe of the base timeframe. This is the final function to be called, which means that the dataframe entering this function will contain all the features and columns from the base asset created by the other feature_engineering_expand functions. This function is a good place to do custom exotic feature extractions (e.g. tsfresh). This function is also a good place for any feature that should not be auto-expanded upon (e.g., day of the week). set_freqai_targets() Required function to set the targets for the model. All targets must be prepended with & to be recognized by the FreqAI internals. Meanwhile, high level feature engineering is handled within \"feature_parameters\":{} in the FreqAI config. Within this file, it is possible to decide large scale feature expansions on top of the base_features such as \"including correlated pairs\" or \"including informative timeframes\" or even \"including recent candles.\"
It is advisable to start from the template feature_engineering_* functions in the source provided example strategy (found in templates/FreqaiExampleStrategy.py) to ensure that the feature definitions are following the correct conventions. Here is an example of how to set the indicators and labels in the strategy:
def feature_engineering_expand_all(self, dataframe: DataFrame, period, metadata, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This function will automatically expand the defined features on the config defined\n `indicator_periods_candles`, `include_timeframes`, `include_shifted_candles`, and\n `include_corr_pairs`. In other words, a single feature defined in this function\n will automatically expand to a total of\n `indicator_periods_candles` * `include_timeframes` * `include_shifted_candles` *\n `include_corr_pairs` numbers of features added to the model.\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n Access metadata such as the current pair/timeframe/period with:\n\n `metadata[\"pair\"]` `metadata[\"tf\"]` `metadata[\"period\"]`\n\n :param df: strategy dataframe which will receive the features\n :param period: period of the indicator - usage example:\n :param metadata: metadata of current pair\n dataframe[\"%-ema-period\"] = ta.EMA(dataframe, timeperiod=period)\n \"\"\"\n\n dataframe[\"%-rsi-period\"] = ta.RSI(dataframe, timeperiod=period)\n dataframe[\"%-mfi-period\"] = ta.MFI(dataframe, timeperiod=period)\n dataframe[\"%-adx-period\"] = ta.ADX(dataframe, timeperiod=period)\n dataframe[\"%-sma-period\"] = ta.SMA(dataframe, timeperiod=period)\n dataframe[\"%-ema-period\"] = ta.EMA(dataframe, timeperiod=period)\n\n bollinger = qtpylib.bollinger_bands(\n qtpylib.typical_price(dataframe), window=period, stds=2.2\n )\n dataframe[\"bb_lowerband-period\"] = bollinger[\"lower\"]\n dataframe[\"bb_middleband-period\"] = bollinger[\"mid\"]\n dataframe[\"bb_upperband-period\"] = bollinger[\"upper\"]\n\n dataframe[\"%-bb_width-period\"] = (\n dataframe[\"bb_upperband-period\"]\n - dataframe[\"bb_lowerband-period\"]\n ) / dataframe[\"bb_middleband-period\"]\n dataframe[\"%-close-bb_lower-period\"] = (\n dataframe[\"close\"] / dataframe[\"bb_lowerband-period\"]\n )\n\n dataframe[\"%-roc-period\"] = ta.ROC(dataframe, timeperiod=period)\n\n dataframe[\"%-relative_volume-period\"] = (\n dataframe[\"volume\"] / dataframe[\"volume\"].rolling(period).mean()\n )\n\n return dataframe\n\n def feature_engineering_expand_basic(self, dataframe: DataFrame, metadata, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This function will automatically expand the defined features on the config defined\n `include_timeframes`, `include_shifted_candles`, and `include_corr_pairs`.\n In other words, a single feature defined in this function\n will automatically expand to a total of\n `include_timeframes` * `include_shifted_candles` * `include_corr_pairs`\n numbers of features added to the model.\n\n Features defined here will *not* be automatically duplicated on user defined\n `indicator_periods_candles`\n\n Access metadata such as the current pair/timeframe with:\n\n `metadata[\"pair\"]` `metadata[\"tf\"]`\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n :param df: strategy dataframe which will receive the features\n :param metadata: metadata of current pair\n dataframe[\"%-pct-change\"] = dataframe[\"close\"].pct_change()\n dataframe[\"%-ema-200\"] = ta.EMA(dataframe, timeperiod=200)\n \"\"\"\n dataframe[\"%-pct-change\"] = dataframe[\"close\"].pct_change()\n dataframe[\"%-raw_volume\"] = dataframe[\"volume\"]\n dataframe[\"%-raw_price\"] = dataframe[\"close\"]\n return dataframe\n\n def feature_engineering_standard(self, dataframe: DataFrame, metadata, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This optional function will be called once with the dataframe of the base timeframe.\n This is the final function to be called, which means that the dataframe entering this\n function will contain all the features and columns created by all other\n freqai_feature_engineering_* functions.\n\n This function is a good place to do custom exotic feature extractions (e.g. tsfresh).\n This function is a good place for any feature that should not be auto-expanded upon\n (e.g. day of the week).\n\n Access metadata such as the current pair with:\n\n `metadata[\"pair\"]`\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n :param df: strategy dataframe which will receive the features\n :param metadata: metadata of current pair\n usage example: dataframe[\"%-day_of_week\"] = (dataframe[\"date\"].dt.dayofweek + 1) / 7\n \"\"\"\n dataframe[\"%-day_of_week\"] = (dataframe[\"date\"].dt.dayofweek + 1) / 7\n dataframe[\"%-hour_of_day\"] = (dataframe[\"date\"].dt.hour + 1) / 25\n return dataframe\n\n def set_freqai_targets(self, dataframe: DataFrame, metadata, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n Required function to set the targets for the model.\n All targets must be prepended with `&` to be recognized by the FreqAI internals.\n\n Access metadata such as the current pair with:\n\n `metadata[\"pair\"]`\n\n :param df: strategy dataframe which will receive the targets\n :param metadata: metadata of current pair\n usage example: dataframe[\"&-target\"] = dataframe[\"close\"].shift(-1) / dataframe[\"close\"]\n \"\"\"\n dataframe[\"&-s_close\"] = (\n dataframe[\"close\"]\n .shift(-self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .rolling(self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .mean()\n / dataframe[\"close\"]\n - 1\n )\n\n return dataframe\nIn the presented example, the user does not wish to pass the bb_lowerband as a feature to the model, and has therefore not prepended it with %. The user does, however, wish to pass bb_width to the model for training/prediction and has therefore prepended it with %.
After having defined the base features, the next step is to expand upon them using the powerful feature_parameters in the configuration file:
\"freqai\": {\n //...\n \"feature_parameters\" : {\n \"include_timeframes\": [\"5m\",\"15m\",\"4h\"],\n \"include_corr_pairlist\": [\n \"ETH/USD\",\n \"LINK/USD\",\n \"BNB/USD\"\n ],\n \"label_period_candles\": 24,\n \"include_shifted_candles\": 2,\n \"indicator_periods_candles\": [10, 20]\n },\n //...\n }\nThe include_timeframes in the config above are the timeframes (tf) of each call to feature_engineering_expand_*() in the strategy. In the presented case, the user is asking for the 5m, 15m, and 4h timeframes of the rsi, mfi, roc, and bb_width to be included in the feature set.
You can ask for each of the defined features to be included also for informative pairs using the include_corr_pairlist. This means that the feature set will include all the features from feature_engineering_expand_*() on all the include_timeframes for each of the correlated pairs defined in the config (ETH/USD, LINK/USD, and BNB/USD in the presented example).
include_shifted_candles indicates the number of previous candles to include in the feature set. For example, include_shifted_candles: 2 tells FreqAI to include the past 2 candles for each of the features in the feature set.
In total, the number of features the user of the presented example strategy has created is: length of include_timeframes * no. features in feature_engineering_expand_*() * length of include_corr_pairlist * no. include_shifted_candles * length of indicator_periods_candles \\(= 3 * 3 * 3 * 2 * 2 = 108\\).
Learn more about creative feature engineering
Check out our medium article geared toward helping users learn how to creatively engineer features.
"},{"location":"freqai-feature-engineering/#gain-finer-control-over-feature_engineering_-functions-with-metadata","title":"Gain finer control overfeature_engineering_* functions with metadata","text":"All feature_engineering_* and set_freqai_targets() functions are passed a metadata dictionary which contains information about the pair, tf (timeframe), and period that FreqAI is automating for feature building. As such, a user can use metadata inside feature_engineering_* functions as criteria for blocking/reserving features for certain timeframes, periods, pairs etc.
def feature_engineering_expand_all(self, dataframe: DataFrame, period, metadata, **kwargs) -> DataFrame:\n if metadata[\"tf\"] == \"1h\":\n dataframe[\"%-roc-period\"] = ta.ROC(dataframe, timeperiod=period)\nThis will block ta.ROC() from being added to any timeframes other than \"1h\".
Important metrics can be returned to the strategy at the end of each model training by assigning them to dk.data['extra_returns_per_train']['my_new_value'] = XYZ inside the custom prediction model class.
FreqAI takes the my_new_value assigned in this dictionary and expands it to fit the dataframe that is returned to the strategy. You can then use the returned metrics in your strategy through dataframe['my_new_value']. An example of how return values can be used in FreqAI are the &*_mean and &*_std values that are used to created a dynamic target threshold.
Another example, where the user wants to use live metrics from the trade database, is shown below:
\"freqai\": {\n \"extra_returns_per_train\": {\"total_profit\": 4}\n }\nYou need to set the standard dictionary in the config so that FreqAI can return proper dataframe shapes. These values will likely be overridden by the prediction model, but in the case where the model has yet to set them, or needs a default initial value, the pre-set values are what will be returned.
"},{"location":"freqai-feature-engineering/#weighting-features-for-temporal-importance","title":"Weighting features for temporal importance","text":"FreqAI allows you to set a weight_factor to weight recent data more strongly than past data via an exponential function:
where \\(W_i\\) is the weight of data point \\(i\\) in a total set of \\(n\\) data points. Below is a figure showing the effect of different weight factors on the data points in a feature set.
"},{"location":"freqai-feature-engineering/#building-the-data-pipeline","title":"Building the data pipeline","text":"By default, FreqAI builds a dynamic pipeline based on user configuration settings. The default settings are robust and designed to work with a variety of methods. These two steps are a MinMaxScaler(-1,1) and a VarianceThreshold which removes any column that has 0 variance. Users can activate other steps with more configuration parameters. For example if users add use_SVM_to_remove_outliers: true to the freqai config, then FreqAI will automatically add the SVMOutlierExtractor to the pipeline. Likewise, users can add principal_component_analysis: true to the freqai config to activate PCA. The DissimilarityIndex is activated with DI_threshold: 1. Finally, noise can also be added to the data with noise_standard_deviation: 0.1. Finally, users can add DBSCAN outlier removal with use_DBSCAN_to_remove_outliers: true.
More information available
Please review the parameter table for more information on these parameters.
"},{"location":"freqai-feature-engineering/#customizing-the-pipeline","title":"Customizing the pipeline","text":"Users are encouraged to customize the data pipeline to their needs by building their own data pipeline. This can be done by simply setting dk.feature_pipeline to their desired Pipeline object inside their IFreqaiModel train() function, or if they prefer not to touch the train() function, they can override define_data_pipeline/define_label_pipeline functions in their IFreqaiModel:
More information available
FreqAI uses the DataSieve pipeline, which follows the SKlearn pipeline API, but adds, among other features, coherence between the X, y, and sample_weight vector point removals, feature removal, feature name following.
from datasieve.transforms import SKLearnWrapper, DissimilarityIndex\nfrom datasieve.pipeline import Pipeline\nfrom sklearn.preprocessing import QuantileTransformer, StandardScaler\nfrom freqai.base_models import BaseRegressionModel\n\n\nclass MyFreqaiModel(BaseRegressionModel):\n \"\"\"\n Some cool custom model\n \"\"\"\n def fit(self, data_dictionary: Dict, dk: FreqaiDataKitchen, **kwargs) -> Any:\n \"\"\"\n My custom fit function\n \"\"\"\n model = cool_model.fit()\n return model\n\n def define_data_pipeline(self) -> Pipeline:\n \"\"\"\n User defines their custom feature pipeline here (if they wish)\n \"\"\"\n feature_pipeline = Pipeline([\n ('qt', SKLearnWrapper(QuantileTransformer(output_distribution='normal'))),\n ('di', ds.DissimilarityIndex(di_threshold=1))\n ])\n\n return feature_pipeline\n\n def define_label_pipeline(self) -> Pipeline:\n \"\"\"\n User defines their custom label pipeline here (if they wish)\n \"\"\"\n label_pipeline = Pipeline([\n ('qt', SKLearnWrapper(StandardScaler())),\n ])\n\n return label_pipeline\nHere, you are defining the exact pipeline that will be used for your feature set during training and prediction. You can use most SKLearn transformation steps by wrapping them in the SKLearnWrapper class as shown above. In addition, you can use any of the transformations available in the DataSieve library.
You can easily add your own transformation by creating a class that inherits from the datasieve BaseTransform and implementing your fit(), transform() and inverse_transform() methods:
from datasieve.transforms.base_transform import BaseTransform\n# import whatever else you need\n\nclass MyCoolTransform(BaseTransform):\n def __init__(self, **kwargs):\n self.param1 = kwargs.get('param1', 1)\n\n def fit(self, X, y=None, sample_weight=None, feature_list=None, **kwargs):\n # do something with X, y, sample_weight, or/and feature_list\n return X, y, sample_weight, feature_list\n\n def transform(self, X, y=None, sample_weight=None,\n feature_list=None, outlier_check=False, **kwargs):\n # do something with X, y, sample_weight, or/and feature_list\n return X, y, sample_weight, feature_list\n\n def inverse_transform(self, X, y=None, sample_weight=None, feature_list=None, **kwargs):\n # do/dont do something with X, y, sample_weight, or/and feature_list\n return X, y, sample_weight, feature_list\nHint
You can define this custom class in the same file as your IFreqaiModel.
IFreqaiModel to the new Pipeline","text":"If you have created your own custom IFreqaiModel with a custom train()/predict() function, and you still rely on data_cleaning_train/predict(), then you will need to migrate to the new pipeline. If your model does not rely on data_cleaning_train/predict(), then you do not need to worry about this migration.
More details about the migration can be found here.
"},{"location":"freqai-feature-engineering/#outlier-detection","title":"Outlier detection","text":"Equity and crypto markets suffer from a high level of non-patterned noise in the form of outlier data points. FreqAI implements a variety of methods to identify such outliers and hence mitigate risk.
"},{"location":"freqai-feature-engineering/#identifying-outliers-with-the-dissimilarity-index-di","title":"Identifying outliers with the Dissimilarity Index (DI)","text":"The Dissimilarity Index (DI) aims to quantify the uncertainty associated with each prediction made by the model.
You can tell FreqAI to remove outlier data points from the training/test data sets using the DI by including the following statement in the config:
\"freqai\": {\n \"feature_parameters\" : {\n \"DI_threshold\": 1\n }\n }\nWhich will add DissimilarityIndex step to your feature_pipeline and set the threshold to 1. The DI allows predictions which are outliers (not existent in the model feature space) to be thrown out due to low levels of certainty. To do so, FreqAI measures the distance between each training data point (feature vector), \\(X_{a}\\), and all other training data points:
where \\(d_{ab}\\) is the distance between the normalized points \\(a\\) and \\(b\\), and \\(p\\) is the number of features, i.e., the length of the vector \\(X\\). The characteristic distance, \\(\\overline{d}\\), for a set of training data points is simply the mean of the average distances:
\\[ \\overline{d} = \\sum_{a=1}^n(\\sum_{b=1}^n(d_{ab}/n)/n) \\]\\(\\overline{d}\\) quantifies the spread of the training data, which is compared to the distance between a new prediction feature vectors, \\(X_k\\) and all the training data:
\\[ d_k = \\arg \\min d_{k,i} \\]This enables the estimation of the Dissimilarity Index as:
\\[ DI_k = d_k/\\overline{d} \\]You can tweak the DI through the DI_threshold to increase or decrease the extrapolation of the trained model. A higher DI_threshold means that the DI is more lenient and allows predictions further away from the training data to be used whilst a lower DI_threshold has the opposite effect and hence discards more predictions.
Below is a figure that describes the DI for a 3D data set.
"},{"location":"freqai-feature-engineering/#identifying-outliers-using-a-support-vector-machine-svm","title":"Identifying outliers using a Support Vector Machine (SVM)","text":"You can tell FreqAI to remove outlier data points from the training/test data sets using a Support Vector Machine (SVM) by including the following statement in the config:
\"freqai\": {\n \"feature_parameters\" : {\n \"use_SVM_to_remove_outliers\": true\n }\n }\nWhich will add SVMOutlierExtractor step to your feature_pipeline. The SVM will be trained on the training data and any data point that the SVM deems to be beyond the feature space will be removed.
You can elect to provide additional parameters for the SVM, such as shuffle, and nu via the feature_parameters.svm_params dictionary in the config.
The parameter shuffle is by default set to False to ensure consistent results. If it is set to True, running the SVM multiple times on the same data set might result in different outcomes due to max_iter being to low for the algorithm to reach the demanded tol. Increasing max_iter solves this issue but causes the procedure to take longer time.
The parameter nu, very broadly, is the amount of data points that should be considered outliers and should be between 0 and 1.
You can configure FreqAI to use DBSCAN to cluster and remove outliers from the training/test data set or incoming outliers from predictions, by activating use_DBSCAN_to_remove_outliers in the config:
\"freqai\": {\n \"feature_parameters\" : {\n \"use_DBSCAN_to_remove_outliers\": true\n }\n }\nWhich will add the DataSieveDBSCAN step to your feature_pipeline. This is an unsupervised machine learning algorithm that clusters data without needing to know how many clusters there should be.
Given a number of data points \\(N\\), and a distance \\(\\varepsilon\\), DBSCAN clusters the data set by setting all data points that have \\(N-1\\) other data points within a distance of \\(\\varepsilon\\) as core points. A data point that is within a distance of \\(\\varepsilon\\) from a core point but that does not have \\(N-1\\) other data points within a distance of \\(\\varepsilon\\) from itself is considered an edge point. A cluster is then the collection of core points and edge points. Data points that have no other data points at a distance \\(<\\varepsilon\\) are considered outliers. The figure below shows a cluster with \\(N = 3\\).
FreqAI uses sklearn.cluster.DBSCAN (details are available on scikit-learn's webpage here (external website)) with min_samples (\\(N\\)) taken as \u00bc of the no. of time points (candles) in the feature set. eps (\\(\\varepsilon\\)) is computed automatically as the elbow point in the k-distance graph computed from the nearest neighbors in the pairwise distances of all data points in the feature set.
You can reduce the dimensionality of your features by activating the principal_component_analysis in the config:
\"freqai\": {\n \"feature_parameters\" : {\n \"principal_component_analysis\": true\n }\n }\nThis will perform PCA on the features and reduce their dimensionality so that the explained variance of the data set is >= 0.999. Reducing data dimensionality makes training the model faster and hence allows for more up-to-date models.
"},{"location":"freqai-parameter-table/","title":"Parameter table","text":"The table below will list all configuration parameters available for FreqAI. Some of the parameters are exemplified in config_examples/config_freqai.example.json.
Mandatory parameters are marked as Required and have to be set in one of the suggested ways.
"},{"location":"freqai-parameter-table/#general-configuration-parameters","title":"General configuration parameters","text":"Parameter Description General configuration parameters within theconfig.freqai tree freqai Required. The parent dictionary containing all the parameters for controlling FreqAI. Datatype: Dictionary. train_period_days Required. Number of days to use for the training data (width of the sliding window). Datatype: Positive integer. backtest_period_days Required. Number of days to inference from the trained model before sliding the train_period_days window defined above, and retraining the model during backtesting (more info here). This can be fractional days, but beware that the provided timerange will be divided by this number to yield the number of trainings necessary to complete the backtest. Datatype: Float. identifier Required. A unique ID for the current model. If models are saved to disk, the identifier allows for reloading specific pre-trained models/data. Datatype: String. live_retrain_hours Frequency of retraining during dry/live runs. Datatype: Float > 0. Default: 0 (models retrain as often as possible). expiration_hours Avoid making predictions if a model is more than expiration_hours old. Datatype: Positive integer. Default: 0 (models never expire). purge_old_models Number of models to keep on disk (not relevant to backtesting). Default is 2, which means that dry/live runs will keep the latest 2 models on disk. Setting to 0 keeps all models. This parameter also accepts a boolean to maintain backwards compatibility. Datatype: Integer. Default: 2. save_backtest_models Save models to disk when running backtesting. Backtesting operates most efficiently by saving the prediction data and reusing them directly for subsequent runs (when you wish to tune entry/exit parameters). Saving backtesting models to disk also allows to use the same model files for starting a dry/live instance with the same model identifier. Datatype: Boolean. Default: False (no models are saved). fit_live_predictions_candles Number of historical candles to use for computing target (label) statistics from prediction data, instead of from the training dataset (more information can be found here). Datatype: Positive integer. continual_learning Use the final state of the most recently trained model as starting point for the new model, allowing for incremental learning (more information can be found here). Beware that this is currently a naive approach to incremental learning, and it has a high probability of overfitting/getting stuck in local minima while the market moves away from your model. We have the connections here primarily for experimental purposes and so that it is ready for more mature approaches to continual learning in chaotic systems like the crypto market. Datatype: Boolean. Default: False. write_metrics_to_disk Collect train timings, inference timings and cpu usage in json file. Datatype: Boolean. Default: False data_kitchen_thread_count Designate the number of threads you want to use for data processing (outlier methods, normalization, etc.). This has no impact on the number of threads used for training. If user does not set it (default), FreqAI will use max number of threads - 2 (leaving 1 physical core available for Freqtrade bot and FreqUI) Datatype: Positive integer. activate_tensorboard Indicate whether or not to activate tensorboard for the tensorboard enabled modules (currently Reinforcment Learning, XGBoost, Catboost, and PyTorch). Tensorboard needs Torch installed, which means you will need the torch/RL docker image or you need to answer \"yes\" to the install question about whether or not you wish to install Torch. Datatype: Boolean. Default: True. wait_for_training_iteration_on_reload When using /reload or ctrl-c, wait for the current training iteration to finish before completing graceful shutdown. If set to False, FreqAI will break the current training iteration, allowing you to shutdown gracefully more quickly, but you will lose your current training iteration. Datatype: Boolean. Default: True."},{"location":"freqai-parameter-table/#feature-parameters","title":"Feature parameters","text":"Parameter Description Feature parameters within the freqai.feature_parameters sub dictionary feature_parameters A dictionary containing the parameters used to engineer the feature set. Details and examples are shown here. Datatype: Dictionary. include_timeframes A list of timeframes that all indicators in feature_engineering_expand_*() will be created for. The list is added as features to the base indicators dataset. Datatype: List of timeframes (strings). include_corr_pairlist A list of correlated coins that FreqAI will add as additional features to all pair_whitelist coins. All indicators set in feature_engineering_expand_*() during feature engineering (see details here) will be created for each correlated coin. The correlated coins features are added to the base indicators dataset. Datatype: List of assets (strings). label_period_candles Number of candles into the future that the labels are created for. This can be used in set_freqai_targets() (see templates/FreqaiExampleStrategy.py for detailed usage). This parameter is not necessarily required, you can create custom labels and choose whether to make use of this parameter or not. Please see templates/FreqaiExampleStrategy.py to see the example usage. Datatype: Positive integer. include_shifted_candles Add features from previous candles to subsequent candles with the intent of adding historical information. If used, FreqAI will duplicate and shift all features from the include_shifted_candles previous candles so that the information is available for the subsequent candle. Datatype: Positive integer. weight_factor Weight training data points according to their recency (see details here). Datatype: Positive float (typically < 1). indicator_max_period_candles No longer used (#7325). Replaced by startup_candle_count which is set in the strategy. startup_candle_count is timeframe independent and defines the maximum period used in feature_engineering_*() for indicator creation. FreqAI uses this parameter together with the maximum timeframe in include_time_frames to calculate how many data points to download such that the first data point does not include a NaN. Datatype: Positive integer. indicator_periods_candles Time periods to calculate indicators for. The indicators are added to the base indicator dataset. Datatype: List of positive integers. principal_component_analysis Automatically reduce the dimensionality of the data set using Principal Component Analysis. See details about how it works here Datatype: Boolean. Default: False. plot_feature_importances Create a feature importance plot for each model for the top/bottom plot_feature_importances number of features. Plot is stored in user_data/models/<identifier>/sub-train-<COIN>_<timestamp>.html. Datatype: Integer. Default: 0. DI_threshold Activates the use of the Dissimilarity Index for outlier detection when set to > 0. See details about how it works here. Datatype: Positive float (typically < 1). use_SVM_to_remove_outliers Train a support vector machine to detect and remove outliers from the training dataset, as well as from incoming data points. See details about how it works here. Datatype: Boolean. svm_params All parameters available in Sklearn's SGDOneClassSVM(). See details about some select parameters here. Datatype: Dictionary. use_DBSCAN_to_remove_outliers Cluster data using the DBSCAN algorithm to identify and remove outliers from training and prediction data. See details about how it works here. Datatype: Boolean. noise_standard_deviation If set, FreqAI adds noise to the training features with the aim of preventing overfitting. FreqAI generates random deviates from a gaussian distribution with a standard deviation of noise_standard_deviation and adds them to all data points. noise_standard_deviation should be kept relative to the normalized space, i.e., between -1 and 1. In other words, since data in FreqAI is always normalized to be between -1 and 1, noise_standard_deviation: 0.05 would result in 32% of the data being randomly increased/decreased by more than 2.5% (i.e., the percent of data falling within the first standard deviation). Datatype: Integer. Default: 0. outlier_protection_percentage Enable to prevent outlier detection methods from discarding too much data. If more than outlier_protection_percentage % of points are detected as outliers by the SVM or DBSCAN, FreqAI will log a warning message and ignore outlier detection, i.e., the original dataset will be kept intact. If the outlier protection is triggered, no predictions will be made based on the training dataset. Datatype: Float. Default: 30. reverse_train_test_order Split the feature dataset (see below) and use the latest data split for training and test on historical split of the data. This allows the model to be trained up to the most recent data point, while avoiding overfitting. However, you should be careful to understand the unorthodox nature of this parameter before employing it. Datatype: Boolean. Default: False (no reversal). shuffle_after_split Split the data into train and test sets, and then shuffle both sets individually. Datatype: Boolean. Default: False. buffer_train_data_candles Cut buffer_train_data_candles off the beginning and end of the training data after the indicators were populated. The main example use is when predicting maxima and minima, the argrelextrema function cannot know the maxima/minima at the edges of the timerange. To improve model accuracy, it is best to compute argrelextrema on the full timerange and then use this function to cut off the edges (buffer) by the kernel. In another case, if the targets are set to a shifted price movement, this buffer is unnecessary because the shifted candles at the end of the timerange will be NaN and FreqAI will automatically cut those off of the training dataset. Datatype: Integer. Default: 0."},{"location":"freqai-parameter-table/#data-split-parameters","title":"Data split parameters","text":"Parameter Description Data split parameters within the freqai.data_split_parameters sub dictionary data_split_parameters Include any additional parameters available from scikit-learn test_train_split(), which are shown here (external website). Datatype: Dictionary. test_size The fraction of data that should be used for testing instead of training. Datatype: Positive float < 1. shuffle Shuffle the training data points during training. Typically, to not remove the chronological order of data in time-series forecasting, this is set to False. Datatype: Boolean. Default: False."},{"location":"freqai-parameter-table/#model-training-parameters","title":"Model training parameters","text":"Parameter Description Model training parameters within the freqai.model_training_parameters sub dictionary model_training_parameters A flexible dictionary that includes all parameters available by the selected model library. For example, if you use LightGBMRegressor, this dictionary can contain any parameter available by the LightGBMRegressor here (external website). If you select a different model, this dictionary can contain any parameter from that model. A list of the currently available models can be found here. Datatype: Dictionary. n_estimators The number of boosted trees to fit in the training of the model. Datatype: Integer. learning_rate Boosting learning rate during training of the model. Datatype: Float. n_jobs, thread_count, task_type Set the number of threads for parallel processing and the task_type (gpu or cpu). Different model libraries use different parameter names. Datatype: Float."},{"location":"freqai-parameter-table/#reinforcement-learning-parameters","title":"Reinforcement Learning parameters","text":"Parameter Description Reinforcement Learning Parameters within the freqai.rl_config sub dictionary rl_config A dictionary containing the control parameters for a Reinforcement Learning model. Datatype: Dictionary. train_cycles Training time steps will be set based on the `train_cycles * number of training data points. Datatype: Integer. max_trade_duration_candles Guides the agent training to keep trades below desired length. Example usage shown in prediction_models/ReinforcementLearner.py within the customizable calculate_reward() function. Datatype: int. model_type Model string from stable_baselines3 or SBcontrib. Available strings include: 'TRPO', 'ARS', 'RecurrentPPO', 'MaskablePPO', 'PPO', 'A2C', 'DQN'. User should ensure that model_training_parameters match those available to the corresponding stable_baselines3 model by visiting their documentation. PPO doc (external website) Datatype: string. policy_type One of the available policy types from stable_baselines3 Datatype: string. max_training_drawdown_pct The maximum drawdown that the agent is allowed to experience during training. Datatype: float. Default: 0.8 cpu_count Number of threads/cpus to dedicate to the Reinforcement Learning training process (depending on if ReinforcementLearning_multiproc is selected or not). Recommended to leave this untouched, by default, this value is set to the total number of physical cores minus 1. Datatype: int. model_reward_parameters Parameters used inside the customizable calculate_reward() function in ReinforcementLearner.py Datatype: int. add_state_info Tell FreqAI to include state information in the feature set for training and inferencing. The current state variables include trade duration, current profit, trade position. This is only available in dry/live runs, and is automatically switched to false for backtesting. Datatype: bool. Default: False. net_arch Network architecture which is well described in stable_baselines3 doc. In summary: [<shared layers>, dict(vf=[<non-shared value network layers>], pi=[<non-shared policy network layers>])]. By default this is set to [128, 128], which defines 2 shared hidden layers with 128 units each. randomize_starting_position Randomize the starting point of each episode to avoid overfitting. Datatype: bool. Default: False. drop_ohlc_from_features Do not include the normalized ohlc data in the feature set passed to the agent during training (ohlc will still be used for driving the environment in all cases) Datatype: Boolean. Default: False progress_bar Display a progress bar with the current progress, elapsed time and estimated remaining time. Datatype: Boolean. Default: False."},{"location":"freqai-parameter-table/#pytorch-parameters","title":"PyTorch parameters","text":""},{"location":"freqai-parameter-table/#general","title":"general","text":"Parameter Description Model training parameters within the freqai.model_training_parameters sub dictionary learning_rate Learning rate to be passed to the optimizer. Datatype: float. Default: 3e-4. model_kwargs Parameters to be passed to the model class. Datatype: dict. Default: {}. trainer_kwargs Parameters to be passed to the trainer class. Datatype: dict. Default: {}."},{"location":"freqai-parameter-table/#trainer_kwargs","title":"trainer_kwargs","text":"Parameter Description Model training parameters within the freqai.model_training_parameters.model_kwargs sub dictionary n_epochs The n_epochs parameter is a crucial setting in the PyTorch training loop that determines the number of times the entire training dataset will be used to update the model's parameters. An epoch represents one full pass through the entire training dataset. Overrides n_steps. Either n_epochs or n_steps must be set. Datatype: int. optional. Default: 10. n_steps An alternative way of setting n_epochs - the number of training iterations to run. Iteration here refer to the number of times we call optimizer.step(). Ignored if n_epochs is set. A simplified version of the function: n_epochs = n_steps / (n_obs / batch_size) The motivation here is that n_steps is easier to optimize and keep stable across different n_obs - the number of data points. Datatype: int. optional. Default: None. batch_size The size of the batches to use during training. Datatype: int. Default: 64."},{"location":"freqai-parameter-table/#additional-parameters","title":"Additional parameters","text":"Parameter Description Extraneous parameters freqai.keras If the selected model makes use of Keras (typical for TensorFlow-based prediction models), this flag needs to be activated so that the model save/loading follows Keras standards. Datatype: Boolean. Default: False. freqai.conv_width The width of a neural network input tensor. This replaces the need for shifting candles (include_shifted_candles) by feeding in historical data points as the second dimension of the tensor. Technically, this parameter can also be used for regressors, but it only adds computational overhead and does not change the model training/prediction. Datatype: Integer. Default: 2. freqai.reduce_df_footprint Recast all numeric columns to float32/int32, with the objective of reducing ram/disk usage and decreasing train/inference timing. This parameter is set in the main level of the Freqtrade configuration file (not inside FreqAI). Datatype: Boolean. Default: False."},{"location":"freqai-reinforcement-learning/","title":"Reinforcement Learning","text":"Installation size
Reinforcement learning dependencies include large packages such as torch, which should be explicitly requested during ./setup.sh -i by answering \"y\" to the question \"Do you also want dependencies for freqai-rl (~700mb additional space required) [y/N]?\". Users who prefer docker should ensure they use the docker image appended with _freqairl.
Reinforcement learning involves two important components, the agent and the training environment. During agent training, the agent moves through historical data candle by candle, always making 1 of a set of actions: Long entry, long exit, short entry, short exit, neutral). During this training process, the environment tracks the performance of these actions and rewards the agent according to a custom user made calculate_reward() (here we offer a default reward for users to build on if they wish details here). The reward is used to train weights in a neural network.
A second important component of the FreqAI RL implementation is the use of state information. State information is fed into the network at each step, including current profit, current position, and current trade duration. These are used to train the agent in the training environment, and to reinforce the agent in dry/live (this functionality is not available in backtesting). FreqAI + Freqtrade is a perfect match for this reinforcing mechanism since this information is readily available in live deployments.
Reinforcement learning is a natural progression for FreqAI, since it adds a new layer of adaptivity and market reactivity that Classifiers and Regressors cannot match. However, Classifiers and Regressors have strengths that RL does not have such as robust predictions. Improperly trained RL agents may find \"cheats\" and \"tricks\" to maximize reward without actually winning any trades. For this reason, RL is more complex and demands a higher level of understanding than typical Classifiers and Regressors.
"},{"location":"freqai-reinforcement-learning/#the-rl-interface","title":"The RL interface","text":"With the current framework, we aim to expose the training environment via the common \"prediction model\" file, which is a user inherited BaseReinforcementLearner object (e.g. freqai/prediction_models/ReinforcementLearner). Inside this user class, the RL environment is available and customized via MyRLEnv as shown below.
We envision the majority of users focusing their effort on creative design of the calculate_reward() function details here, while leaving the rest of the environment untouched. Other users may not touch the environment at all, and they will only play with the configuration settings and the powerful feature engineering that already exists in FreqAI. Meanwhile, we enable advanced users to create their own model classes entirely.
The framework is built on stable_baselines3 (torch) and OpenAI gym for the base environment class. But generally speaking, the model class is well isolated. Thus, the addition of competing libraries can be easily integrated into the existing framework. For the environment, it is inheriting from gym.Env which means that it is necessary to write an entirely new environment in order to switch to a different library.
As explained above, the agent is \"trained\" in an artificial trading \"environment\". In our case, that environment may seem quite similar to a real Freqtrade backtesting environment, but it is NOT. In fact, the RL training environment is much more simplified. It does not incorporate any of the complicated strategy logic, such as callbacks like custom_exit, custom_stoploss, leverage controls, etc. The RL environment is instead a very \"raw\" representation of the true market, where the agent has free will to learn the policy (read: stoploss, take profit, etc.) which is enforced by the calculate_reward(). Thus, it is important to consider that the agent training environment is not identical to the real world.
Setting up and running a Reinforcement Learning model is the same as running a Regressor or Classifier. The same two flags, --freqaimodel and --strategy, must be defined on the command line:
freqtrade trade --freqaimodel ReinforcementLearner --strategy MyRLStrategy --config config.json\nwhere ReinforcementLearner will use the templated ReinforcementLearner from freqai/prediction_models/ReinforcementLearner (or a custom user defined one located in user_data/freqaimodels). The strategy, on the other hand, follows the same base feature engineering with feature_engineering_* as a typical Regressor. The difference lies in the creation of the targets, Reinforcement Learning doesn't require them. However, FreqAI requires a default (neutral) value to be set in the action column:
def set_freqai_targets(self, dataframe, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n Required function to set the targets for the model.\n All targets must be prepended with `&` to be recognized by the FreqAI internals.\n\n More details about feature engineering available:\n\n https://www.freqtrade.io/en/latest/freqai-feature-engineering\n\n :param df: strategy dataframe which will receive the targets\n usage example: dataframe[\"&-target\"] = dataframe[\"close\"].shift(-1) / dataframe[\"close\"]\n \"\"\"\n # For RL, there are no direct targets to set. This is filler (neutral)\n # until the agent sends an action.\n dataframe[\"&-action\"] = 0\n return dataframe\nMost of the function remains the same as for typical Regressors, however, the function below shows how the strategy must pass the raw price data to the agent so that it has access to raw OHLCV in the training environment:
def feature_engineering_standard(self, dataframe: DataFrame, **kwargs) -> DataFrame:\n # The following features are necessary for RL models\n dataframe[f\"%-raw_close\"] = dataframe[\"close\"]\n dataframe[f\"%-raw_open\"] = dataframe[\"open\"]\n dataframe[f\"%-raw_high\"] = dataframe[\"high\"]\n dataframe[f\"%-raw_low\"] = dataframe[\"low\"]\n return dataframe\nFinally, there is no explicit \"label\" to make - instead it is necessary to assign the &-action column which will contain the agent's actions when accessed in populate_entry/exit_trends(). In the present example, the neutral action to 0. This value should align with the environment used. FreqAI provides two environments, both use 0 as the neutral action.
After users realize there are no labels to set, they will soon understand that the agent is making its \"own\" entry and exit decisions. This makes strategy construction rather simple. The entry and exit signals come from the agent in the form of an integer - which are used directly to decide entries and exits in the strategy:
def populate_entry_trend(self, df: DataFrame, metadata: dict) -> DataFrame:\n\n enter_long_conditions = [df[\"do_predict\"] == 1, df[\"&-action\"] == 1]\n\n if enter_long_conditions:\n df.loc[\n reduce(lambda x, y: x & y, enter_long_conditions), [\"enter_long\", \"enter_tag\"]\n ] = (1, \"long\")\n\n enter_short_conditions = [df[\"do_predict\"] == 1, df[\"&-action\"] == 3]\n\n if enter_short_conditions:\n df.loc[\n reduce(lambda x, y: x & y, enter_short_conditions), [\"enter_short\", \"enter_tag\"]\n ] = (1, \"short\")\n\n return df\n\n def populate_exit_trend(self, df: DataFrame, metadata: dict) -> DataFrame:\n exit_long_conditions = [df[\"do_predict\"] == 1, df[\"&-action\"] == 2]\n if exit_long_conditions:\n df.loc[reduce(lambda x, y: x & y, exit_long_conditions), \"exit_long\"] = 1\n\n exit_short_conditions = [df[\"do_predict\"] == 1, df[\"&-action\"] == 4]\n if exit_short_conditions:\n df.loc[reduce(lambda x, y: x & y, exit_short_conditions), \"exit_short\"] = 1\n\n return df\nIt is important to consider that &-action depends on which environment they choose to use. The example above shows 5 actions, where 0 is neutral, 1 is enter long, 2 is exit long, 3 is enter short and 4 is exit short.
In order to configure the Reinforcement Learner the following dictionary must exist in the freqai config:
\"rl_config\": {\n \"train_cycles\": 25,\n \"add_state_info\": true,\n \"max_trade_duration_candles\": 300,\n \"max_training_drawdown_pct\": 0.02,\n \"cpu_count\": 8,\n \"model_type\": \"PPO\",\n \"policy_type\": \"MlpPolicy\",\n \"model_reward_parameters\": {\n \"rr\": 1,\n \"profit_aim\": 0.025\n }\n }\nParameter details can be found here, but in general the train_cycles decides how many times the agent should cycle through the candle data in its artificial environment to train weights in the model. model_type is a string which selects one of the available models in stable_baselines(external link).
Note
If you would like to experiment with continual_learning, then you should set that value to true in the main freqai configuration dictionary. This will tell the Reinforcement Learning library to continue training new models from the final state of previous models, instead of retraining new models from scratch each time a retrain is initiated.
Note
Remember that the general model_training_parameters dictionary should contain all the model hyperparameter customizations for the particular model_type. For example, PPO parameters can be found here.
Not for production
Warning! The reward function provided with the Freqtrade source code is a showcase of functionality designed to show/test as many possible environment control features as possible. It is also designed to run quickly on small computers. This is a benchmark, it is not for live production. Please beware that you will need to create your own custom_reward() function or use a template built by other users outside of the Freqtrade source code.
As you begin to modify the strategy and the prediction model, you will quickly realize some important differences between the Reinforcement Learner and the Regressors/Classifiers. Firstly, the strategy does not set a target value (no labels!). Instead, you set the calculate_reward() function inside the MyRLEnv class (see below). A default calculate_reward() is provided inside prediction_models/ReinforcementLearner.py to demonstrate the necessary building blocks for creating rewards, but this is not designed for production. Users must create their own custom reinforcement learning model class or use a pre-built one from outside the Freqtrade source code and save it to user_data/freqaimodels. It is inside the calculate_reward() where creative theories about the market can be expressed. For example, you can reward your agent when it makes a winning trade, and penalize the agent when it makes a losing trade. Or perhaps, you wish to reward the agent for entering trades, and penalize the agent for sitting in trades too long. Below we show examples of how these rewards are all calculated:
Hint
The best reward functions are ones that are continuously differentiable, and well scaled. In other words, adding a single large negative penalty to a rare event is not a good idea, and the neural net will not be able to learn that function. Instead, it is better to add a small negative penalty to a common event. This will help the agent learn faster. Not only this, but you can help improve the continuity of your rewards/penalties by having them scale with severity according to some linear/exponential functions. In other words, you'd slowly scale the penalty as the duration of the trade increases. This is better than a single large penalty occurring at a single point in time.
from freqtrade.freqai.prediction_models.ReinforcementLearner import ReinforcementLearner\nfrom freqtrade.freqai.RL.Base5ActionRLEnv import Actions, Base5ActionRLEnv, Positions\n\n\nclass MyCoolRLModel(ReinforcementLearner):\n \"\"\"\n User created RL prediction model.\n\n Save this file to `freqtrade/user_data/freqaimodels`\n\n then use it with:\n\n freqtrade trade --freqaimodel MyCoolRLModel --config config.json --strategy SomeCoolStrat\n\n Here the users can override any of the functions\n available in the `IFreqaiModel` inheritance tree. Most importantly for RL, this\n is where the user overrides `MyRLEnv` (see below), to define custom\n `calculate_reward()` function, or to override any other parts of the environment.\n\n This class also allows users to override any other part of the IFreqaiModel tree.\n For example, the user can override `def fit()` or `def train()` or `def predict()`\n to take fine-tuned control over these processes.\n\n Another common override may be `def data_cleaning_predict()` where the user can\n take fine-tuned control over the data handling pipeline.\n \"\"\"\n class MyRLEnv(Base5ActionRLEnv):\n \"\"\"\n User made custom environment. This class inherits from BaseEnvironment and gym.Env.\n Users can override any functions from those parent classes. Here is an example\n of a user customized `calculate_reward()` function.\n\n Warning!\n This is function is a showcase of functionality designed to show as many possible\n environment control features as possible. It is also designed to run quickly\n on small computers. This is a benchmark, it is *not* for live production.\n \"\"\"\n def calculate_reward(self, action: int) -> float:\n # first, penalize if the action is not valid\n if not self._is_valid(action):\n return -2\n pnl = self.get_unrealized_profit()\n\n factor = 100\n\n pair = self.pair.replace(':', '')\n\n # you can use feature values from dataframe\n # Assumes the shifted RSI indicator has been generated in the strategy.\n rsi_now = self.raw_features[f\"%-rsi-period_10_shift-1_{pair}_\"\n f\"{self.config['timeframe']}\"].iloc[self._current_tick]\n\n # reward agent for entering trades\n if (action in (Actions.Long_enter.value, Actions.Short_enter.value)\n and self._position == Positions.Neutral):\n if rsi_now < 40:\n factor = 40 / rsi_now\n else:\n factor = 1\n return 25 * factor\n\n # discourage agent from not entering trades\n if action == Actions.Neutral.value and self._position == Positions.Neutral:\n return -1\n max_trade_duration = self.rl_config.get('max_trade_duration_candles', 300)\n trade_duration = self._current_tick - self._last_trade_tick\n if trade_duration <= max_trade_duration:\n factor *= 1.5\n elif trade_duration > max_trade_duration:\n factor *= 0.5\n # discourage sitting in position\n if self._position in (Positions.Short, Positions.Long) and \\\n action == Actions.Neutral.value:\n return -1 * trade_duration / max_trade_duration\n # close long\n if action == Actions.Long_exit.value and self._position == Positions.Long:\n if pnl > self.profit_aim * self.rr:\n factor *= self.rl_config['model_reward_parameters'].get('win_reward_factor', 2)\n return float(pnl * factor)\n # close short\n if action == Actions.Short_exit.value and self._position == Positions.Short:\n if pnl > self.profit_aim * self.rr:\n factor *= self.rl_config['model_reward_parameters'].get('win_reward_factor', 2)\n return float(pnl * factor)\n return 0.\nReinforcement Learning models benefit from tracking training metrics. FreqAI has integrated Tensorboard to allow users to track training and evaluation performance across all coins and across all retrainings. Tensorboard is activated via the following command:
tensorboard --logdir user_data/models/unique-id\nwhere unique-id is the identifier set in the freqai configuration file. This command must be run in a separate shell to view the output in the browser at 127.0.0.1:6006 (6006 is the default port used by Tensorboard).
FreqAI also provides a built in episodic summary logger called self.tensorboard_log for adding custom information to the Tensorboard log. By default, this function is already called once per step inside the environment to record the agent actions. All values accumulated for all steps in a single episode are reported at the conclusion of each episode, followed by a full reset of all metrics to 0 in preparation for the subsequent episode.
self.tensorboard_log can also be used anywhere inside the environment, for example, it can be added to the calculate_reward function to collect more detailed information about how often various parts of the reward were called:
class MyRLEnv(Base5ActionRLEnv):\n \"\"\"\n User made custom environment. This class inherits from BaseEnvironment and gym.Env.\n Users can override any functions from those parent classes. Here is an example\n of a user customized `calculate_reward()` function.\n \"\"\"\n def calculate_reward(self, action: int) -> float:\n if not self._is_valid(action):\n self.tensorboard_log(\"invalid\")\n return -2\nNote
The self.tensorboard_log() function is designed for tracking incremented objects only i.e. events, actions inside the training environment. If the event of interest is a float, the float can be passed as the second argument e.g. self.tensorboard_log(\"float_metric1\", 0.23). In this case the metric values are not incremented.
FreqAI provides three base environments, Base3ActionRLEnvironment, Base4ActionEnvironment and Base5ActionEnvironment. As the names imply, the environments are customized for agents that can select from 3, 4 or 5 actions. The Base3ActionEnvironment is the simplest, the agent can select from hold, long, or short. This environment can also be used for long-only bots (it automatically follows the can_short flag from the strategy), where long is the enter condition and short is the exit condition. Meanwhile, in the Base4ActionEnvironment, the agent can enter long, enter short, hold neutral, or exit position. Finally, in the Base5ActionEnvironment, the agent has the same actions as Base4, but instead of a single exit action, it separates exit long and exit short. The main changes stemming from the environment selection include:
calculate_rewardAll of the FreqAI provided environments inherit from an action/position agnostic environment object called the BaseEnvironment, which contains all shared logic. The architecture is designed to be easily customized. The simplest customization is the calculate_reward() (see details here). However, the customizations can be further extended into any of the functions inside the environment. You can do this by simply overriding those functions inside your MyRLEnv in the prediction model file. Or for more advanced customizations, it is encouraged to create an entirely new environment inherited from BaseEnvironment.
Note
Only the Base3ActionRLEnv can do long-only training/trading (set the user strategy attribute can_short = False).
There are two ways to train and deploy an adaptive machine learning model - live deployment and historical backtesting. In both cases, FreqAI runs/simulates periodic retraining of models as shown in the following figure:
"},{"location":"freqai-running/#live-deployments","title":"Live deployments","text":"FreqAI can be run dry/live using the following command:
freqtrade trade --strategy FreqaiExampleStrategy --config config_freqai.example.json --freqaimodel LightGBMRegressor\nWhen launched, FreqAI will start training a new model, with a new identifier, based on the config settings. Following training, the model will be used to make predictions on incoming candles until a new model is available. New models are typically generated as often as possible, with FreqAI managing an internal queue of the coin pairs to try to keep all models equally up to date. FreqAI will always use the most recently trained model to make predictions on incoming live data. If you do not want FreqAI to retrain new models as often as possible, you can set live_retrain_hours to tell FreqAI to wait at least that number of hours before training a new model. Additionally, you can set expired_hours to tell FreqAI to avoid making predictions on models that are older than that number of hours.
Trained models are by default saved to disk to allow for reuse during backtesting or after a crash. You can opt to purge old models to save disk space by setting \"purge_old_models\": true in the config.
To start a dry/live run from a saved backtest model (or from a previously crashed dry/live session), you only need to specify the identifier of the specific model:
\"freqai\": {\n \"identifier\": \"example\",\n \"live_retrain_hours\": 0.5\n }\nIn this case, although FreqAI will initiate with a pre-trained model, it will still check to see how much time has elapsed since the model was trained. If a full live_retrain_hours has elapsed since the end of the loaded model, FreqAI will start training a new model.
FreqAI automatically downloads the proper amount of data needed to ensure training of a model through the defined train_period_days and startup_candle_count (see the parameter table for detailed descriptions of these parameters).
All predictions made during the lifetime of a specific identifier model are stored in historic_predictions.pkl to allow for reloading after a crash or changes made to the config.
FreqAI stores new model files after each successful training. These files become obsolete as new models are generated to adapt to new market conditions. If you are planning to leave FreqAI running for extended periods of time with high frequency retraining, you should enable purge_old_models in the config:
\"freqai\": {\n \"purge_old_models\": 4,\n }\nThis will automatically purge all models older than the four most recently trained ones to save disk space. Inputing \"0\" will never purge any models.
"},{"location":"freqai-running/#backtesting","title":"Backtesting","text":"The FreqAI backtesting module can be executed with the following command:
freqtrade backtesting --strategy FreqaiExampleStrategy --strategy-path freqtrade/templates --config config_examples/config_freqai.example.json --freqaimodel LightGBMRegressor --timerange 20210501-20210701\nIf this command has never been executed with the existing config file, FreqAI will train a new model for each pair, for each backtesting window within the expanded --timerange.
Backtesting mode requires downloading the necessary data before deployment (unlike in dry/live mode where FreqAI handles the data downloading automatically). You should be careful to consider that the time range of the downloaded data is more than the backtesting time range. This is because FreqAI needs data prior to the desired backtesting time range in order to train a model to be ready to make predictions on the first candle of the set backtesting time range. More details on how to calculate the data to download can be found here.
Model reuse
Once the training is completed, you can execute the backtesting again with the same config file and FreqAI will find the trained models and load them instead of spending time training. This is useful if you want to tweak (or even hyperopt) buy and sell criteria inside the strategy. If you want to retrain a new model with the same config file, you should simply change the identifier. This way, you can return to using any model you wish by simply specifying the identifier.
Note
Backtesting calls set_freqai_targets() one time for each backtest window (where the number of windows is the full backtest timerange divided by the backtest_period_days parameter). Doing this means that the targets simulate dry/live behavior without look ahead bias. However, the definition of the features in feature_engineering_*() is performed once on the entire training timerange. This means that you should be sure that features do not look-ahead into the future. More details about look-ahead bias can be found in Common Mistakes.
To allow for tweaking your strategy (not the features!), FreqAI will automatically save the predictions during backtesting so that they can be reused for future backtests and live runs using the same identifier model. This provides a performance enhancement geared towards enabling high-level hyperopting of entry/exit criteria.
An additional directory called backtesting_predictions, which contains all the predictions stored in feather format, will be created in the unique-id folder.
To change your features, you must set a new identifier in the config to signal to FreqAI to train new models.
To save the models generated during a particular backtest so that you can start a live deployment from one of them instead of training a new model, you must set save_backtest_models to True in the config.
Note
To ensure that the model can be reused, freqAI will call your strategy with a dataframe of length 1. If your strategy requires more data than this to generate the same features, you can't reuse backtest predictions for live deployment and need to update your identifier for each new backtest.
FreqAI allow you to reuse live historic predictions through the backtest parameter --freqai-backtest-live-models. This can be useful when you want to reuse predictions generated in dry/run for comparison or other study.
The --timerange parameter must not be informed, as it will be automatically calculated through the data in the historic predictions file.
For live/dry deployments, FreqAI will download the necessary data automatically. However, to use backtesting functionality, you need to download the necessary data using download-data (details here). You need to pay careful attention to understanding how much additional data needs to be downloaded to ensure that there is a sufficient amount of training data before the start of the backtesting time range. The amount of additional data can be roughly estimated by moving the start date of the time range backwards by train_period_days and the startup_candle_count (see the parameter table for detailed descriptions of these parameters) from the beginning of the desired backtesting time range.
As an example, to backtest the --timerange 20210501-20210701 using the example config which sets train_period_days to 30, together with startup_candle_count: 40 on a maximum include_timeframes of 1h, the start date for the downloaded data needs to be 20210501 - 30 days - 40 * 1h / 24 hours = 20210330 (31.7 days earlier than the start of the desired training time range).
The backtesting time range is defined with the typical --timerange parameter in the configuration file. The duration of the sliding training window is set by train_period_days, whilst backtest_period_days is the sliding backtesting window, both in number of days (backtest_period_days can be a float to indicate sub-daily retraining in live/dry mode). In the presented example config (found in config_examples/config_freqai.example.json), the user is asking FreqAI to use a training period of 30 days and backtest on the subsequent 7 days. After the training of the model, FreqAI will backtest the subsequent 7 days. The \"sliding window\" then moves one week forward (emulating FreqAI retraining once per week in live mode) and the new model uses the previous 30 days (including the 7 days used for backtesting by the previous model) to train. This is repeated until the end of --timerange. This means that if you set --timerange 20210501-20210701, FreqAI will have trained 8 separate models at the end of --timerange (because the full range comprises 8 weeks).
Note
Although fractional backtest_period_days is allowed, you should be aware that the --timerange is divided by this value to determine the number of models that FreqAI will need to train in order to backtest the full range. For example, by setting a --timerange of 10 days, and a backtest_period_days of 0.1, FreqAI will need to train 100 models per pair to complete the full backtest. Because of this, a true backtest of FreqAI adaptive training would take a very long time. The best way to fully test a model is to run it dry and let it train constantly. In this case, backtesting would take the exact same amount of time as a dry run.
During dry/live mode, FreqAI trains each coin pair sequentially (on separate threads/GPU from the main Freqtrade bot). This means that there is always an age discrepancy between models. If you are training on 50 pairs, and each pair requires 5 minutes to train, the oldest model will be over 4 hours old. This may be undesirable if the characteristic time scale (the trade duration target) for a strategy is less than 4 hours. You can decide to only make trade entries if the model is less than a certain number of hours old by setting the expiration_hours in the config file:
\"freqai\": {\n \"expiration_hours\": 0.5,\n }\nIn the presented example config, the user will only allow predictions on models that are less than \u00bd hours old.
"},{"location":"freqai-running/#controlling-the-model-learning-process","title":"Controlling the model learning process","text":"Model training parameters are unique to the selected machine learning library. FreqAI allows you to set any parameter for any library using the model_training_parameters dictionary in the config. The example config (found in config_examples/config_freqai.example.json) shows some of the example parameters associated with Catboost and LightGBM, but you can add any parameters available in those libraries or any other machine learning library you choose to implement.
Data split parameters are defined in data_split_parameters which can be any parameters associated with scikit-learn's train_test_split() function. train_test_split() has a parameters called shuffle which allows to shuffle the data or keep it unshuffled. This is particularly useful to avoid biasing training with temporally auto-correlated data. More details about these parameters can be found the scikit-learn website (external website).
The FreqAI specific parameter label_period_candles defines the offset (number of candles into the future) used for the labels. In the presented example config, the user is asking for labels that are 24 candles in the future.
You can choose to adopt a continual learning scheme by setting \"continual_learning\": true in the config. By enabling continual_learning, after training an initial model from scratch, subsequent trainings will start from the final model state of the preceding training. This gives the new model a \"memory\" of the previous state. By default, this is set to False which means that all new models are trained from scratch, without input from previous models.
Since continual_learning means that the model parameter space cannot change between trainings, principal_component_analysis is automatically disabled when continual_learning is enabled. Hint: PCA changes the parameter space and the number of features, learn more about PCA here.
Beware that this is currently a naive approach to incremental learning, and it has a high probability of overfitting/getting stuck in local minima while the market moves away from your model. We have the mechanics available in FreqAI primarily for experimental purposes and so that it is ready for more mature approaches to continual learning in chaotic systems like the crypto market.
"},{"location":"freqai-running/#hyperopt","title":"Hyperopt","text":"You can hyperopt using the same command as for typical Freqtrade hyperopt:
freqtrade hyperopt --hyperopt-loss SharpeHyperOptLoss --strategy FreqaiExampleStrategy --freqaimodel LightGBMRegressor --strategy-path freqtrade/templates --config config_examples/config_freqai.example.json --timerange 20220428-20220507\nhyperopt requires you to have the data pre-downloaded in the same fashion as if you were doing backtesting. In addition, you must consider some restrictions when trying to hyperopt FreqAI strategies:
--analyze-per-epoch hyperopt parameter is not compatible with FreqAI.feature_engineering_*() and set_freqai_targets() functions. This means that you cannot optimize model parameters using hyperopt. Apart from this exception, it is possible to optimize all other spaces.The best method for combining hyperopt and FreqAI is to focus on hyperopting entry/exit thresholds/criteria. You need to focus on hyperopting parameters that are not used in your features. For example, you should not try to hyperopt rolling window lengths in the feature creation, or any part of the FreqAI config which changes predictions. In order to efficiently hyperopt the FreqAI strategy, FreqAI stores predictions as dataframes and reuses them. Hence the requirement to hyperopt entry/exit thresholds/criteria only.
A good example of a hyperoptable parameter in FreqAI is a threshold for the Dissimilarity Index (DI) DI_values beyond which we consider data points as outliers:
di_max = IntParameter(low=1, high=20, default=10, space='buy', optimize=True, load=True)\ndataframe['outlier'] = np.where(dataframe['DI_values'] > self.di_max.value/10, 1, 0)\nThis specific hyperopt would help you understand the appropriate DI_values for your particular parameter space.
Availability
FreqAI includes tensorboard for a variety of models, including XGBoost, all PyTorch models, Reinforcement Learning, and Catboost. If you would like to see Tensorboard integrated into another model type, please open an issue on the Freqtrade GitHub
Requirements
Tensorboard logging requires the FreqAI torch installation/docker image.
The easiest way to use tensorboard is to ensure freqai.activate_tensorboard is set to True (default setting) in your configuration file, run FreqAI, then open a separate shell and run:
cd freqtrade\ntensorboard --logdir user_data/models/unique-id\nwhere unique-id is the identifier set in the freqai configuration file. This command must be run in a separate shell if you wish to view the output in your browser at 127.0.0.1:6060 (6060 is the default port used by Tensorboard).
Deactivate for improved performance
Tensorboard logging can slow down training and should be deactivated for production use.
"},{"location":"freqai/","title":"Introduction","text":""},{"location":"freqai/#freqai","title":"FreqAI","text":""},{"location":"freqai/#introduction","title":"Introduction","text":"FreqAI is a software designed to automate a variety of tasks associated with training a predictive machine learning model to generate market forecasts given a set of input signals. In general, FreqAI aims to be a sandbox for easily deploying robust machine learning libraries on real-time data (details).
Note
FreqAI is, and always will be, a not-for-profit, open-source project. FreqAI does not have a crypto token, FreqAI does not sell signals, and FreqAI does not have a domain besides the present freqtrade documentation.
Features include:
The easiest way to quickly test FreqAI is to run it in dry mode with the following command:
freqtrade trade --config config_examples/config_freqai.example.json --strategy FreqaiExampleStrategy --freqaimodel LightGBMRegressor --strategy-path freqtrade/templates\nYou will see the boot-up process of automatic data downloading, followed by simultaneous training and trading.
Not for production
The example strategy provided with the Freqtrade source code is designed for showcasing/testing a wide variety of FreqAI features. It is also designed to run on small computers so that it can be used as a benchmark between developers and users. It is not designed to be run in production.
An example strategy, prediction model, and config to use as a starting points can be found in freqtrade/templates/FreqaiExampleStrategy.py, freqtrade/freqai/prediction_models/LightGBMRegressor.py, and config_examples/config_freqai.example.json, respectively.
You provide FreqAI with a set of custom base indicators (the same way as in a typical Freqtrade strategy) as well as target values (labels). For each pair in the whitelist, FreqAI trains a model to predict the target values based on the input of custom indicators. The models are then consistently retrained, with a predetermined frequency, to adapt to market conditions. FreqAI offers the ability to both backtest strategies (emulating reality with periodic retraining on historic data) and deploy dry/live runs. In dry/live conditions, FreqAI can be set to constant retraining in a background thread to keep models as up to date as possible.
An overview of the algorithm, explaining the data processing pipeline and model usage, is shown below.
"},{"location":"freqai/#important-machine-learning-vocabulary","title":"Important machine learning vocabulary","text":"Features - the parameters, based on historic data, on which a model is trained. All features for a single candle are stored as a vector. In FreqAI, you build a feature data set from anything you can construct in the strategy.
Labels - the target values that the model is trained toward. Each feature vector is associated with a single label that is defined by you within the strategy. These labels intentionally look into the future and are what you are training the model to be able to predict.
Training - the process of \"teaching\" the model to match the feature sets to the associated labels. Different types of models \"learn\" in different ways which means that one might be better than another for a specific application. More information about the different models that are already implemented in FreqAI can be found here.
Train data - a subset of the feature data set that is fed to the model during training to \"teach\" the model how to predict the targets. This data directly influences weight connections in the model.
Test data - a subset of the feature data set that is used to evaluate the performance of the model after training. This data does not influence nodal weights within the model.
Inferencing - the process of feeding a trained model new unseen data on which it will make a prediction.
"},{"location":"freqai/#install-prerequisites","title":"Install prerequisites","text":"The normal Freqtrade install process will ask if you wish to install FreqAI dependencies. You should reply \"yes\" to this question if you wish to use FreqAI. If you did not reply yes, you can manually install these dependencies after the install with:
pip install -r requirements-freqai.txt\nNote
Catboost will not be installed on low-powered arm devices (raspberry), since it does not provide wheels for this platform.
"},{"location":"freqai/#usage-with-docker","title":"Usage with docker","text":"If you are using docker, a dedicated tag with FreqAI dependencies is available as :freqai. As such - you can replace the image line in your docker compose file with image: freqtradeorg/freqtrade:stable_freqai. This image contains the regular FreqAI dependencies. Similar to native installs, Catboost will not be available on ARM based devices. If you would like to use PyTorch or Reinforcement learning, you should use the torch or RL tags, image: freqtradeorg/freqtrade:stable_freqaitorch, image: freqtradeorg/freqtrade:stable_freqairl.
docker-compose-freqai.yml
We do provide an explicit docker-compose file for this in docker/docker-compose-freqai.yml - which can be used via docker compose -f docker/docker-compose-freqai.yml run ... - or can be copied to replace the original docker file. This docker-compose file also contains a (disabled) section to enable GPU resources within docker containers. This obviously assumes the system has GPU resources available.
Forecasting chaotic time-series based systems, such as equity/cryptocurrency markets, requires a broad set of tools geared toward testing a wide range of hypotheses. Fortunately, a recent maturation of robust machine learning libraries (e.g. scikit-learn) has opened up a wide range of research possibilities. Scientists from a diverse range of fields can now easily prototype their studies on an abundance of established machine learning algorithms. Similarly, these user-friendly libraries enable \"citizen scientists\" to use their basic Python skills for data exploration. However, leveraging these machine learning libraries on historical and live chaotic data sources can be logistically difficult and expensive. Additionally, robust data collection, storage, and handling presents a disparate challenge. FreqAI aims to provide a generalized and extensible open-sourced framework geared toward live deployments of adaptive modeling for market forecasting. The FreqAI framework is effectively a sandbox for the rich world of open-source machine learning libraries. Inside the FreqAI sandbox, users find they can combine a wide variety of third-party libraries to test creative hypotheses on a free live 24/7 chaotic data source - cryptocurrency exchange data.
FreqAI is published in the Journal of Open Source Software. If you find FreqAI useful in your research, please use the following citation:
@article{Caulk2022, \n doi = {10.21105/joss.04864},\n url = {https://doi.org/10.21105/joss.04864},\n year = {2022}, publisher = {The Open Journal},\n volume = {7}, number = {80}, pages = {4864},\n author = {Robert A. Caulk and Elin T\u00f6rnquist and Matthias Voppichler and Andrew R. Lawless and Ryan McMullan and Wagner Costa Santos and Timothy C. Pogue and Johan van der Vlugt and Stefan P. Gehring and Pascal Schmidt},\n title = {FreqAI: generalizing adaptive modeling for chaotic time-series market forecasts},\n journal = {Journal of Open Source Software} } \nFreqAI cannot be combined with dynamic VolumePairlists (or any pairlist filter that adds and removes pairs dynamically). This is for performance reasons - FreqAI relies on making quick predictions/retrains. To do this effectively, it needs to download all the training data at the beginning of a dry/live instance. FreqAI stores and appends new candles automatically for future retrains. This means that if new pairs arrive later in the dry run due to a volume pairlist, it will not have the data ready. However, FreqAI does work with the ShufflePairlist or a VolumePairlist which keeps the total pairlist constant (but reorders the pairs according to volume).
Here we compile some external materials that provide deeper looks into various components of FreqAI:
You can find support for FreqAI in a variety of places, including the Freqtrade discord, the dedicated FreqAI discord, and in github issues.
"},{"location":"freqai/#credits","title":"Credits","text":"FreqAI is developed by a group of individuals who all contribute specific skillsets to the project.
Conception and software development: Robert Caulk @robcaulk
Theoretical brainstorming and data analysis: Elin T\u00f6rnquist @th0rntwig
Code review and software architecture brainstorming: @xmatthias
Software development: Wagner Costa @wagnercosta Emre Suzen @aemr3 Timothy Pogue @wizrds
Beta testing and bug reporting: Stefan Gehring @bloodhunter4rc, @longyu, Andrew Lawless @paranoidandy, Pascal Schmidt @smidelis, Ryan McMullan @smarmau, Juha Nyk\u00e4nen @suikula, Johan van der Vlugt @jooopiert, Rich\u00e1rd J\u00f3zsa @richardjosza
"},{"location":"hyperopt/","title":"Hyperopt","text":"This page explains how to tune your strategy by finding the optimal parameters, a process called hyperparameter optimization. The bot uses algorithms included in the optuna package to accomplish this. The search will burn all your CPU cores, make your laptop sound like a fighter jet and still take a long time.
In general, the search for best parameters starts with a few random combinations (see below for more details) and then uses one of optuna's sampler algorithms (currently NSGAIIISampler) to quickly find a combination of parameters in the search hyperspace that minimizes the value of the loss function.
Hyperopt requires historic data to be available, just as backtesting does (hyperopt runs backtesting many times with different parameters). To learn how to get data for the pairs and exchange you're interested in, head over to the Data Downloading section of the documentation.
Bug
Hyperopt can crash when used with only 1 CPU Core as found out in Issue #1133
Note
Since 2021.4 release you no longer have to write a separate hyperopt class, but can configure the parameters directly in the strategy. The legacy method was supported up to 2021.8 and has been removed in 2021.9.
"},{"location":"hyperopt/#install-hyperopt-dependencies","title":"Install hyperopt dependencies","text":"Since Hyperopt dependencies are not needed to run the bot itself, are heavy, can not be easily built on some platforms (like Raspberry PI), they are not installed by default. Before you run Hyperopt, you need to install the corresponding dependencies, as described in this section below.
Note
Since Hyperopt is a resource intensive process, running it on a Raspberry Pi is not recommended nor supported.
"},{"location":"hyperopt/#docker","title":"Docker","text":"The docker-image includes hyperopt dependencies, no further action needed.
"},{"location":"hyperopt/#easy-installation-script-setupsh-manual-installation","title":"Easy installation script (setup.sh) / Manual installation","text":"source .venv/bin/activate\npip install -r requirements-hyperopt.txt\nusage: freqtrade hyperopt [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH] [-s NAME]\n [--strategy-path PATH] [--recursive-strategy-search]\n [--freqaimodel NAME] [--freqaimodel-path PATH]\n [-i TIMEFRAME] [--timerange TIMERANGE]\n [--data-format-ohlcv {json,jsongz,feather,parquet}]\n [--max-open-trades INT]\n [--stake-amount STAKE_AMOUNT] [--fee FLOAT]\n [-p PAIRS [PAIRS ...]] [--hyperopt-path PATH]\n [--eps] [--enable-protections]\n [--dry-run-wallet DRY_RUN_WALLET]\n [--timeframe-detail TIMEFRAME_DETAIL] [-e INT]\n [--spaces {all,buy,sell,roi,stoploss,trailing,protection,trades,default} [{all,buy,sell,roi,stoploss,trailing,protection,trades,default} ...]]\n [--print-all] [--print-json] [-j JOBS]\n [--random-state INT] [--min-trades INT]\n [--hyperopt-loss NAME] [--disable-param-export]\n [--ignore-missing-spaces] [--analyze-per-epoch]\n [--early-stop INT]\n\noptions:\n -h, --help show this help message and exit\n -i TIMEFRAME, --timeframe TIMEFRAME\n Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).\n --timerange TIMERANGE\n Specify what timerange of data to use.\n --data-format-ohlcv {json,jsongz,feather,parquet}\n Storage format for downloaded candle (OHLCV) data.\n (default: `feather`).\n --max-open-trades INT\n Override the value of the `max_open_trades`\n configuration setting.\n --stake-amount STAKE_AMOUNT\n Override the value of the `stake_amount` configuration\n setting.\n --fee FLOAT Specify fee ratio. Will be applied twice (on trade\n entry and exit).\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --hyperopt-path PATH Specify additional lookup path for Hyperopt Loss\n functions.\n --eps, --enable-position-stacking\n Allow buying the same pair multiple times (position\n stacking).\n --enable-protections, --enableprotections\n Enable protections for backtesting. Will slow\n backtesting down by a considerable amount, but will\n include configured protections\n --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET\n Starting balance, used for backtesting / hyperopt and\n dry-runs.\n --timeframe-detail TIMEFRAME_DETAIL\n Specify detail timeframe for backtesting (`1m`, `5m`,\n `30m`, `1h`, `1d`).\n -e INT, --epochs INT Specify number of epochs (default: 100).\n --spaces {all,buy,sell,roi,stoploss,trailing,protection,trades,default} [{all,buy,sell,roi,stoploss,trailing,protection,trades,default} ...]\n Specify which parameters to hyperopt. Space-separated\n list.\n --print-all Print all results, not only the best ones.\n --print-json Print output in JSON format.\n -j JOBS, --job-workers JOBS\n The number of concurrently running jobs for\n hyperoptimization (hyperopt worker processes). If -1\n (default), all CPUs are used, for -2, all CPUs but one\n are used, etc. If 1 is given, no parallel computing\n code is used at all.\n --random-state INT Set random state to some positive integer for\n reproducible hyperopt results.\n --min-trades INT Set minimal desired number of trades for evaluations\n in the hyperopt optimization path (default: 1).\n --hyperopt-loss NAME, --hyperoptloss NAME\n Specify the class name of the hyperopt loss function\n class (IHyperOptLoss). Different functions can\n generate completely different results, since the\n target for optimization is different. Built-in\n Hyperopt-loss-functions are:\n ShortTradeDurHyperOptLoss, OnlyProfitHyperOptLoss,\n SharpeHyperOptLoss, SharpeHyperOptLossDaily,\n SortinoHyperOptLoss, SortinoHyperOptLossDaily,\n CalmarHyperOptLoss, MaxDrawDownHyperOptLoss,\n MaxDrawDownRelativeHyperOptLoss,\n MaxDrawDownPerPairHyperOptLoss,\n ProfitDrawDownHyperOptLoss, MultiMetricHyperOptLoss\n --disable-param-export\n Disable automatic hyperopt parameter export.\n --ignore-missing-spaces, --ignore-unparameterized-spaces\n Suppress errors for any requested Hyperopt spaces that\n do not contain any parameters.\n --analyze-per-epoch Run populate_indicators once per epoch.\n --early-stop INT Early stop hyperopt if no improvement after (default:\n 0) epochs.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n\nStrategy arguments:\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n --freqaimodel NAME Specify a custom freqaimodels.\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\nChecklist on all tasks / possibilities in hyperopt
Depending on the space you want to optimize, only some of the below are required:
space='buy' - for entry signal optimizationspace='sell' - for exit signal optimizationNote
populate_indicators needs to create all indicators any of the spaces may use, otherwise hyperopt will not work.
Rarely you may also need to create a nested class named HyperOpt and implement
roi_space - for custom ROI optimization (if you need the ranges for the ROI parameters in the optimization hyperspace that differ from default)generate_roi_table - for custom ROI optimization (if you need the ranges for the values in the ROI table that differ from default or the number of entries (steps) in the ROI table which differs from the default 4 steps)stoploss_space - for custom stoploss optimization (if you need the range for the stoploss parameter in the optimization hyperspace that differs from default)trailing_space - for custom trailing stop optimization (if you need the ranges for the trailing stop parameters in the optimization hyperspace that differ from default)max_open_trades_space - for custom max_open_trades optimization (if you need the ranges for the max_open_trades parameter in the optimization hyperspace that differ from default)Quickly optimize ROI, stoploss and trailing stoploss
You can quickly optimize the spaces roi, stoploss and trailing without changing anything in your strategy.
# Have a working strategy at hand.\nfreqtrade hyperopt --hyperopt-loss SharpeHyperOptLossDaily --spaces roi stoploss trailing --strategy MyWorkingStrategy --config config.json -e 100\nHyperopt will first load your data into memory and will then run populate_indicators() once per Pair to generate all indicators, unless --analyze-per-epoch is specified.
Hyperopt will then spawn into different processes (number of processors, or -j <n>), and run backtesting over and over again, changing the parameters that are part of the --spaces defined.
For every new set of parameters, freqtrade will run first populate_entry_trend() followed by populate_exit_trend(), and then run the regular backtesting process to simulate trades.
After backtesting, the results are passed into the loss function, which will evaluate if this result was better or worse than previous results. Based on the loss function result, hyperopt will determine the next set of parameters to try in the next round of backtesting.
"},{"location":"hyperopt/#configure-your-guards-and-triggers","title":"Configure your Guards and Triggers","text":"There are two places you need to change in your strategy file to add a new buy hyperopt for testing:
populate_entry_trend() - use defined parameter values instead of raw constants.There you have two different types of indicators: 1. guards and 2. triggers.
Guards and Triggers
Technically, there is no difference between Guards and Triggers. However, this guide will make this distinction to make it clear that signals should not be \"sticking\". Sticking signals are signals that are active for multiple candles. This can lead into entering a signal late (right before the signal disappears - which means that the chance of success is a lot lower than right at the beginning).
Hyper-optimization will, for each epoch round, pick one trigger and possibly multiple guards.
"},{"location":"hyperopt/#exit-signal-optimization","title":"Exit signal optimization","text":"Similar to the entry-signal above, exit-signals can also be optimized. Place the corresponding settings into the following methods
sell_*, or by explicitly defining space='sell'.populate_exit_trend() - use defined parameter values instead of raw constants.The configuration and rules are the same than for buy signals.
"},{"location":"hyperopt/#solving-a-mystery","title":"Solving a Mystery","text":"Let's say you are curious: should you use MACD crossings or lower Bollinger Bands to trigger your long entries. And you also wonder should you use RSI or ADX to help with those decisions. If you decide to use RSI or ADX, which values should I use for them?
So let's use hyperparameter optimization to solve this mystery.
"},{"location":"hyperopt/#defining-indicators-to-be-used","title":"Defining indicators to be used","text":"We start by calculating the indicators our strategy is going to use.
class MyAwesomeStrategy(IStrategy):\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Generate all indicators used by the strategy\n \"\"\"\n dataframe['adx'] = ta.ADX(dataframe)\n dataframe['rsi'] = ta.RSI(dataframe)\n macd = ta.MACD(dataframe)\n dataframe['macd'] = macd['macd']\n dataframe['macdsignal'] = macd['macdsignal']\n dataframe['macdhist'] = macd['macdhist']\n\n bollinger = ta.BBANDS(dataframe, timeperiod=20, nbdevup=2.0, nbdevdn=2.0)\n dataframe['bb_lowerband'] = bollinger['lowerband']\n dataframe['bb_middleband'] = bollinger['middleband']\n dataframe['bb_upperband'] = bollinger['upperband']\n return dataframe\nWe continue to define hyperoptable parameters:
class MyAwesomeStrategy(IStrategy):\n buy_adx = DecimalParameter(20, 40, decimals=1, default=30.1, space=\"buy\")\n buy_rsi = IntParameter(20, 40, default=30, space=\"buy\")\n buy_adx_enabled = BooleanParameter(default=True, space=\"buy\")\n buy_rsi_enabled = CategoricalParameter([True, False], default=False, space=\"buy\")\n buy_trigger = CategoricalParameter([\"bb_lower\", \"macd_cross_signal\"], default=\"bb_lower\", space=\"buy\")\nThe above definition says: I have five parameters I want to randomly combine to find the best combination. buy_rsi is an integer parameter, which will be tested between 20 and 40. This space has a size of 20. buy_adx is a decimal parameter, which will be evaluated between 20 and 40 with 1 decimal place (so values are 20.1, 20.2, ...). This space has a size of 200. Then we have three category variables. First two are either True or False. We use these to either enable or disable the ADX and RSI guards. The last one we call trigger and use it to decide which buy trigger we want to use.
Parameter space assignment
Parameters must either be assigned to a variable named buy_* or sell_* - or contain space='buy' | space='sell' to be assigned to a space correctly. If no parameter is available for a space, you'll receive the error that no space was found when running hyperopt. Parameters with unclear space (e.g. adx_period = IntParameter(4, 24, default=14) - no explicit nor implicit space) will not be detected and will therefore be ignored.
So let's write the buy strategy using these values:
def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n conditions = []\n # GUARDS AND TRENDS\n if self.buy_adx_enabled.value:\n conditions.append(dataframe['adx'] > self.buy_adx.value)\n if self.buy_rsi_enabled.value:\n conditions.append(dataframe['rsi'] < self.buy_rsi.value)\n\n # TRIGGERS\n if self.buy_trigger.value == 'bb_lower':\n conditions.append(dataframe['close'] < dataframe['bb_lowerband'])\n if self.buy_trigger.value == 'macd_cross_signal':\n conditions.append(qtpylib.crossed_above(\n dataframe['macd'], dataframe['macdsignal']\n ))\n\n # Check that volume is not 0\n conditions.append(dataframe['volume'] > 0)\n\n if conditions:\n dataframe.loc[\n reduce(lambda x, y: x & y, conditions),\n 'enter_long'] = 1\n\n return dataframe\nHyperopt will now call populate_entry_trend() many times (epochs) with different value combinations. It will use the given historical data and simulate buys based on the buy signals generated with the above function. Based on the results, hyperopt will tell you which parameter combination produced the best results (based on the configured loss function).
Note
The above setup expects to find ADX, RSI and Bollinger Bands in the populated indicators. When you want to test an indicator that isn't used by the bot currently, remember to add it to the populate_indicators() method in your strategy or hyperopt file.
There are four parameter types each suited for different purposes.
IntParameter - defines an integral parameter with upper and lower boundaries of search space.DecimalParameter - defines a floating point parameter with a limited number of decimals (default 3). Should be preferred instead of RealParameter in most cases.RealParameter - defines a floating point parameter with upper and lower boundaries and no precision limit. Rarely used as it creates a space with a near infinite number of possibilities.CategoricalParameter - defines a parameter with a predetermined number of choices.BooleanParameter - Shorthand for CategoricalParameter([True, False]) - great for \"enable\" parameters.There are two parameter options that can help you to quickly test various ideas:
optimize - when set to False, the parameter will not be included in optimization process. (Default: True)load - when set to False, results of a previous hyperopt run (in buy_params and sell_params either in your strategy or the JSON output file) will not be used as the starting value for subsequent hyperopts. The default value specified in the parameter will be used instead. (Default: True)Effects of load=False on backtesting
Be aware that setting the load option to False will mean backtesting will also use the default value specified in the parameter and not the value found through hyperoptimisation.
Warning
Hyperoptable parameters cannot be used in populate_indicators - as hyperopt does not recalculate indicators for each epoch, so the starting value would be used in this case.
Assuming you have a simple strategy in mind - a EMA cross strategy (2 Moving averages crossing) - and you'd like to find the ideal parameters for this strategy. By default, we assume a stoploss of 5% - and a take-profit (minimal_roi) of 10% - which means freqtrade will sell the trade once 10% profit has been reached.
from pandas import DataFrame\nfrom functools import reduce\n\nimport talib.abstract as ta\n\nfrom freqtrade.strategy import (BooleanParameter, CategoricalParameter, DecimalParameter, \n IStrategy, IntParameter)\nimport freqtrade.vendor.qtpylib.indicators as qtpylib\n\nclass MyAwesomeStrategy(IStrategy):\n stoploss = -0.05\n timeframe = '15m'\n minimal_roi = {\n \"0\": 0.10\n }\n # Define the parameter spaces\n buy_ema_short = IntParameter(3, 50, default=5)\n buy_ema_long = IntParameter(15, 200, default=50)\n\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"Generate all indicators used by the strategy\"\"\"\n\n # Calculate all ema_short values\n for val in self.buy_ema_short.range:\n dataframe[f'ema_short_{val}'] = ta.EMA(dataframe, timeperiod=val)\n\n # Calculate all ema_long values\n for val in self.buy_ema_long.range:\n dataframe[f'ema_long_{val}'] = ta.EMA(dataframe, timeperiod=val)\n\n return dataframe\n\n def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n conditions = []\n conditions.append(qtpylib.crossed_above(\n dataframe[f'ema_short_{self.buy_ema_short.value}'], dataframe[f'ema_long_{self.buy_ema_long.value}']\n ))\n\n # Check that volume is not 0\n conditions.append(dataframe['volume'] > 0)\n\n if conditions:\n dataframe.loc[\n reduce(lambda x, y: x & y, conditions),\n 'enter_long'] = 1\n return dataframe\n\n def populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n conditions = []\n conditions.append(qtpylib.crossed_above(\n dataframe[f'ema_long_{self.buy_ema_long.value}'], dataframe[f'ema_short_{self.buy_ema_short.value}']\n ))\n\n # Check that volume is not 0\n conditions.append(dataframe['volume'] > 0)\n\n if conditions:\n dataframe.loc[\n reduce(lambda x, y: x & y, conditions),\n 'exit_long'] = 1\n return dataframe\nBreaking it down:
Using self.buy_ema_short.range will return a range object containing all entries between the Parameters low and high value. In this case (IntParameter(3, 50, default=5)), the loop would run for all numbers between 3 and 50 ([3, 4, 5, ... 49, 50]). By using this in a loop, hyperopt will generate 48 new columns (['buy_ema_3', 'buy_ema_4', ... , 'buy_ema_50']).
Hyperopt itself will then use the selected value to create the buy and sell signals.
While this strategy is most likely too simple to provide consistent profit, it should serve as an example how optimize indicator parameters.
Note
self.buy_ema_short.range will act differently between hyperopt and other modes. For hyperopt, the above example may generate 48 new columns, however for all other modes (backtesting, dry/live), it will only generate the column for the selected value. You should therefore avoid using the resulting column with explicit values (values other than self.buy_ema_short.value).
Note
range property may also be used with DecimalParameter and CategoricalParameter. RealParameter does not provide this property due to infinite search space.
During normal hyperopting, indicators are calculated once and supplied to each epoch, linearly increasing RAM usage as a factor of increasing cores. As this also has performance implications, there are two alternatives to reduce RAM usage
ema_short and ema_long calculations from populate_indicators() to populate_entry_trend(). Since populate_entry_trend() will be calculated every epoch, you don't need to use .range functionality.--analyze-per-epoch which will move the execution of populate_indicators() to the epoch process, calculating a single value per parameter per epoch instead of using the .range functionality. In this case, .range functionality will only return the actually used value.These alternatives will reduce RAM usage, but increase CPU usage. However, your hyperopting run will be less likely to fail due to Out Of Memory (OOM) issues.
Whether you are using .range functionality or the alternatives above, you should try to use space ranges as small as possible since this will improve CPU/RAM usage.
Freqtrade can also optimize protections. How you optimize protections is up to you, and the following should be considered as example only.
The strategy will simply need to define the \"protections\" entry as property returning a list of protection configurations.
from pandas import DataFrame\nfrom functools import reduce\n\nimport talib.abstract as ta\n\nfrom freqtrade.strategy import (BooleanParameter, CategoricalParameter, DecimalParameter, \n IStrategy, IntParameter)\nimport freqtrade.vendor.qtpylib.indicators as qtpylib\n\nclass MyAwesomeStrategy(IStrategy):\n stoploss = -0.05\n timeframe = '15m'\n # Define the parameter spaces\n cooldown_lookback = IntParameter(2, 48, default=5, space=\"protection\", optimize=True)\n stop_duration = IntParameter(12, 200, default=5, space=\"protection\", optimize=True)\n use_stop_protection = BooleanParameter(default=True, space=\"protection\", optimize=True)\n\n\n @property\n def protections(self):\n prot = []\n\n prot.append({\n \"method\": \"CooldownPeriod\",\n \"stop_duration_candles\": self.cooldown_lookback.value\n })\n if self.use_stop_protection.value:\n prot.append({\n \"method\": \"StoplossGuard\",\n \"lookback_period_candles\": 24 * 3,\n \"trade_limit\": 4,\n \"stop_duration_candles\": self.stop_duration.value,\n \"only_per_pair\": False\n })\n\n return prot\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # ...\nYou can then run hyperopt as follows: freqtrade hyperopt --hyperopt-loss SharpeHyperOptLossDaily --strategy MyAwesomeStrategy --spaces protection
Note
The protection space is not part of the default space, and is only available with the Parameters Hyperopt interface, not with the legacy hyperopt interface (which required separate hyperopt files). Freqtrade will also automatically change the \"--enable-protections\" flag if the protection space is selected.
Warning
If protections are defined as property, entries from the configuration will be ignored. It is therefore recommended to not define protections in the configuration.
"},{"location":"hyperopt/#migrating-from-previous-property-setups","title":"Migrating from previous property setups","text":"A migration from a previous setup is pretty simple, and can be accomplished by converting the protections entry to a property. In simple terms, the following configuration will be converted to the below.
class MyAwesomeStrategy(IStrategy):\n protections = [\n {\n \"method\": \"CooldownPeriod\",\n \"stop_duration_candles\": 4\n }\n ]\nResult
class MyAwesomeStrategy(IStrategy):\n\n @property\n def protections(self):\n return [\n {\n \"method\": \"CooldownPeriod\",\n \"stop_duration_candles\": 4\n }\n ]\nYou will then obviously also change potential interesting entries to parameters to allow hyper-optimization.
"},{"location":"hyperopt/#optimizing-max_entry_position_adjustment","title":"Optimizingmax_entry_position_adjustment","text":"While max_entry_position_adjustment is not a separate space, it can still be used in hyperopt by using the property approach shown above.
from pandas import DataFrame\nfrom functools import reduce\n\nimport talib.abstract as ta\n\nfrom freqtrade.strategy import (BooleanParameter, CategoricalParameter, DecimalParameter, \n IStrategy, IntParameter)\nimport freqtrade.vendor.qtpylib.indicators as qtpylib\n\nclass MyAwesomeStrategy(IStrategy):\n stoploss = -0.05\n timeframe = '15m'\n\n # Define the parameter spaces\n max_epa = CategoricalParameter([-1, 0, 1, 3, 5, 10], default=1, space=\"buy\", optimize=True)\n\n @property\n def max_entry_position_adjustment(self):\n return self.max_epa.value\n\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # ...\nIntParameter You can also use the IntParameter for this optimization, but you must explicitly return an integer:
max_epa = IntParameter(-1, 10, default=1, space=\"buy\", optimize=True)\n\n@property\ndef max_entry_position_adjustment(self):\n return int(self.max_epa.value)\nEach hyperparameter tuning requires a target. This is usually defined as a loss function (sometimes also called objective function), which should decrease for more desirable results, and increase for bad results.
A loss function must be specified via the --hyperopt-loss <Class-name> argument (or optionally via the configuration under the \"hyperopt_loss\" key). This class should be in its own file within the user_data/hyperopts/ directory.
Currently, the following loss functions are builtin:
ShortTradeDurHyperOptLoss - (default legacy Freqtrade hyperoptimization loss function) - Mostly for short trade duration and avoiding losses.OnlyProfitHyperOptLoss - takes only amount of profit into consideration.SharpeHyperOptLoss - Optimizes Sharpe Ratio calculated on trade returns relative to standard deviation.SharpeHyperOptLossDaily - Optimizes Sharpe Ratio calculated on daily trade returns relative to standard deviation.SortinoHyperOptLoss - Optimizes Sortino Ratio calculated on trade returns relative to downside standard deviation.SortinoHyperOptLossDaily - optimizes Sortino Ratio calculated on daily trade returns relative to downside standard deviation.MaxDrawDownHyperOptLoss - Optimizes Maximum absolute drawdown.MaxDrawDownRelativeHyperOptLoss - Optimizes both maximum absolute drawdown while also adjusting for maximum relative drawdown.MaxDrawDownPerPairHyperOptLoss - Calculates the profit/drawdown ratio per pair and returns the worst result as objective, forcing hyperopt to optimize the parameters for all pairs in the pairlist. This way, we prevent one or more pairs with good results from inflating the metrics, while the pairs with poor results are not represented and therefore not optimized.CalmarHyperOptLoss - Optimizes Calmar Ratio calculated on trade returns relative to max drawdown.ProfitDrawDownHyperOptLoss - Optimizes by max Profit & min Drawdown objective. DRAWDOWN_MULT variable within the hyperoptloss file can be adjusted to be stricter or more flexible on drawdown purposes.MultiMetricHyperOptLoss - Optimizes by several key metrics to achieve balanced performance. The primary focus is on maximizing Profit and minimizing Drawdown, while also considering additional metrics such as Profit Factor, Expectancy Ratio and Winrate. Moreover, it applies a penalty for epochs with a low number of trades, encouraging strategies with adequate trade frequency.Creation of a custom loss function is covered in the Advanced Hyperopt part of the documentation.
"},{"location":"hyperopt/#execute-hyperopt","title":"Execute Hyperopt","text":"Once you have updated your hyperopt configuration you can run it. Because hyperopt tries a lot of combinations to find the best parameters it will take time to get a good result.
We strongly recommend to use screen or tmux to prevent any connection loss.
freqtrade hyperopt --config config.json --hyperopt-loss <hyperoptlossname> --strategy <strategyname> -e 500 --spaces all\nThe -e option will set how many evaluations hyperopt will do. Since hyperopt uses Bayesian search, running too many epochs at once may not produce greater results. Experience has shown that best results are usually not improving much after 500-1000 epochs. The --early-stop option will set after how many epochs with no improvements hyperopt will stop. A good value is 20-30% of the total epochs. Any value greater than 0 and lower than 20 it will be replaced by 20. Early stop is by default disabled (--early-stop=0)
Doing multiple runs (executions) with a few 1000 epochs and different random state will most likely produce different results.
The --spaces all option determines that all possible parameters should be optimized. Possibilities are listed below.
Note
Hyperopt will store hyperopt results with the timestamp of the hyperopt start time. Reading commands (hyperopt-list, hyperopt-show) can use --hyperopt-filename <filename> to read and display older hyperopt results. You can find a list of filenames with ls -l user_data/hyperopt_results/.
If you would like to hyperopt parameters using an alternate historical data set that you have on-disk, use the --datadir PATH option. By default, hyperopt uses data from directory user_data/data.
Use the --timerange argument to change how much of the test-set you want to use. For example, to use one month of data, pass --timerange 20210101-20210201 (from january 2021 - february 2021) to the hyperopt call.
Full command:
freqtrade hyperopt --strategy <strategyname> --timerange 20210101-20210201\nUse the --spaces option to limit the search space used by hyperopt. Letting Hyperopt optimize everything is a huuuuge search space. Often it might make more sense to start by just searching for initial buy algorithm. Or maybe you just want to optimize your stoploss or roi table for that awesome new buy strategy you have.
Legal values are:
all: optimize everythingbuy: just search for a new buy strategysell: just search for a new sell strategyroi: just optimize the minimal profit table for your strategystoploss: search for the best stoploss valuetrailing: search for the best trailing stop valuestrades: search for the best max open trades valuesprotection: search for the best protection parameters (read the protections section on how to properly define these)default: all except trailing, trades and protection--spaces roi stoplossThe default Hyperopt Search Space, used when no --space command line option is specified, does not include the trailing hyperspace. We recommend you to run optimization for the trailing hyperspace separately, when the best parameters for other hyperspaces were found, validated and pasted into your custom strategy.
Once Hyperopt is completed you can use the result to update your strategy. Given the following result from hyperopt:
Best result:\n\n 44/100: 135 trades. Avg profit 0.57%. Total profit 0.03871918 BTC (0.7722%). Avg duration 180.4 mins. Objective: 1.94367\n\n # Buy hyperspace params:\n buy_params = {\n 'buy_adx': 44,\n 'buy_rsi': 29,\n 'buy_adx_enabled': False,\n 'buy_rsi_enabled': True,\n 'buy_trigger': 'bb_lower'\n }\nYou should understand this result like:
bb_lower.'buy_adx_enabled': False.'buy_rsi_enabled': True) and the best value is 29.0 ('buy_rsi': 29.0)When using Hyperoptable parameters, the result of your hyperopt-run will be written to a json file next to your strategy (so for MyAwesomeStrategy.py, the file would be MyAwesomeStrategy.json). This file is also updated when using the hyperopt-show sub-command, unless --disable-param-export is provided to either of the 2 commands.
Your strategy class can also contain these results explicitly. Simply copy hyperopt results block and paste them at class level, replacing old parameters (if any). New parameters will automatically be loaded next time strategy is executed.
Transferring your whole hyperopt result to your strategy would then look like:
class MyAwesomeStrategy(IStrategy):\n # Buy hyperspace params:\n buy_params = {\n 'buy_adx': 44,\n 'buy_rsi': 29,\n 'buy_adx_enabled': False,\n 'buy_rsi_enabled': True,\n 'buy_trigger': 'bb_lower'\n }\nNote
Values in the configuration file will overwrite Parameter-file level parameters - and both will overwrite parameters within the strategy. The prevalence is therefore: config > parameter file > strategy *_params > parameter default
If you are optimizing ROI (i.e. if optimization search-space contains 'all', 'default' or 'roi'), your result will look as follows and include a ROI table:
Best result:\n\n 44/100: 135 trades. Avg profit 0.57%. Total profit 0.03871918 BTC (0.7722%). Avg duration 180.4 mins. Objective: 1.94367\n\n # ROI table:\n minimal_roi = {\n 0: 0.10674,\n 21: 0.09158,\n 78: 0.03634,\n 118: 0\n }\nIn order to use this best ROI table found by Hyperopt in backtesting and for live trades/dry-run, copy-paste it as the value of the minimal_roi attribute of your custom strategy:
# Minimal ROI designed for the strategy.\n # This attribute will be overridden if the config file contains \"minimal_roi\"\n minimal_roi = {\n 0: 0.10674,\n 21: 0.09158,\n 78: 0.03634,\n 118: 0\n }\nAs stated in the comment, you can also use it as the value of the minimal_roi setting in the configuration file.
If you are optimizing ROI, Freqtrade creates the 'roi' optimization hyperspace for you -- it's the hyperspace of components for the ROI tables. By default, each ROI table generated by the Freqtrade consists of 4 rows (steps). Hyperopt implements adaptive ranges for ROI tables with ranges for values in the ROI steps that depend on the timeframe used. By default the values vary in the following ranges (for some of the most used timeframes, values are rounded to 3 digits after the decimal point):
# step 1m 5m 1h 1d 1 0 0.011...0.119 0 0.03...0.31 0 0.068...0.711 0 0.121...1.258 2 2...8 0.007...0.042 10...40 0.02...0.11 120...480 0.045...0.252 2880...11520 0.081...0.446 3 4...20 0.003...0.015 20...100 0.01...0.04 240...1200 0.022...0.091 5760...28800 0.040...0.162 4 6...44 0.0 30...220 0.0 360...2640 0.0 8640...63360 0.0These ranges should be sufficient in most cases. The minutes in the steps (ROI dict keys) are scaled linearly depending on the timeframe used. The ROI values in the steps (ROI dict values) are scaled logarithmically depending on the timeframe used.
If you have the generate_roi_table() and roi_space() methods in your custom hyperopt, remove them in order to utilize these adaptive ROI tables and the ROI hyperoptimization space generated by Freqtrade by default.
Override the roi_space() method if you need components of the ROI tables to vary in other ranges. Override the generate_roi_table() and roi_space() methods and implement your own custom approach for generation of the ROI tables during hyperoptimization if you need a different structure of the ROI tables or other amount of rows (steps).
A sample for these methods can be found in the overriding pre-defined spaces section.
Reduced search space
To limit the search space further, Decimals are limited to 3 decimal places (a precision of 0.001). This is usually sufficient, every value more precise than this will usually result in overfitted results. You can however overriding pre-defined spaces to change this to your needs.
"},{"location":"hyperopt/#understand-hyperopt-stoploss-results","title":"Understand Hyperopt Stoploss results","text":"If you are optimizing stoploss values (i.e. if optimization search-space contains 'all', 'default' or 'stoploss'), your result will look as follows and include stoploss:
Best result:\n\n 44/100: 135 trades. Avg profit 0.57%. Total profit 0.03871918 BTC (0.7722%). Avg duration 180.4 mins. Objective: 1.94367\n\n # Buy hyperspace params:\n buy_params = {\n 'buy_adx': 44,\n 'buy_rsi': 29,\n 'buy_adx_enabled': False,\n 'buy_rsi_enabled': True,\n 'buy_trigger': 'bb_lower'\n }\n\n stoploss: -0.27996\nIn order to use this best stoploss value found by Hyperopt in backtesting and for live trades/dry-run, copy-paste it as the value of the stoploss attribute of your custom strategy:
# Optimal stoploss designed for the strategy\n # This attribute will be overridden if the config file contains \"stoploss\"\n stoploss = -0.27996\nAs stated in the comment, you can also use it as the value of the stoploss setting in the configuration file.
If you are optimizing stoploss values, Freqtrade creates the 'stoploss' optimization hyperspace for you. By default, the stoploss values in that hyperspace vary in the range -0.35...-0.02, which is sufficient in most cases.
If you have the stoploss_space() method in your custom hyperopt file, remove it in order to utilize Stoploss hyperoptimization space generated by Freqtrade by default.
Override the stoploss_space() method and define the desired range in it if you need stoploss values to vary in other range during hyperoptimization. A sample for this method can be found in the overriding pre-defined spaces section.
Reduced search space
To limit the search space further, Decimals are limited to 3 decimal places (a precision of 0.001). This is usually sufficient, every value more precise than this will usually result in overfitted results. You can however overriding pre-defined spaces to change this to your needs.
"},{"location":"hyperopt/#understand-hyperopt-trailing-stop-results","title":"Understand Hyperopt Trailing Stop results","text":"If you are optimizing trailing stop values (i.e. if optimization search-space contains 'all' or 'trailing'), your result will look as follows and include trailing stop parameters:
Best result:\n\n 45/100: 606 trades. Avg profit 1.04%. Total profit 0.31555614 BTC ( 630.48%). Avg duration 150.3 mins. Objective: -1.10161\n\n # Trailing stop:\n trailing_stop = True\n trailing_stop_positive = 0.02001\n trailing_stop_positive_offset = 0.06038\n trailing_only_offset_is_reached = True\nIn order to use these best trailing stop parameters found by Hyperopt in backtesting and for live trades/dry-run, copy-paste them as the values of the corresponding attributes of your custom strategy:
# Trailing stop\n # These attributes will be overridden if the config file contains corresponding values.\n trailing_stop = True\n trailing_stop_positive = 0.02001\n trailing_stop_positive_offset = 0.06038\n trailing_only_offset_is_reached = True\nAs stated in the comment, you can also use it as the values of the corresponding settings in the configuration file.
"},{"location":"hyperopt/#default-trailing-stop-search-space","title":"Default Trailing Stop Search Space","text":"If you are optimizing trailing stop values, Freqtrade creates the 'trailing' optimization hyperspace for you. By default, the trailing_stop parameter is always set to True in that hyperspace, the value of the trailing_only_offset_is_reached vary between True and False, the values of the trailing_stop_positive and trailing_stop_positive_offset parameters vary in the ranges 0.02...0.35 and 0.01...0.1 correspondingly, which is sufficient in most cases.
Override the trailing_space() method and define the desired range in it if you need values of the trailing stop parameters to vary in other ranges during hyperoptimization. A sample for this method can be found in the overriding pre-defined spaces section.
Reduced search space
To limit the search space further, Decimals are limited to 3 decimal places (a precision of 0.001). This is usually sufficient, every value more precise than this will usually result in overfitted results. You can however overriding pre-defined spaces to change this to your needs.
"},{"location":"hyperopt/#reproducible-results","title":"Reproducible results","text":"The search for optimal parameters starts with a few (currently 30) random combinations in the hyperspace of parameters, random Hyperopt epochs. These random epochs are marked with an asterisk character (*) in the first column in the Hyperopt output.
The initial state for generation of these random values (random state) is controlled by the value of the --random-state command line option. You can set it to some arbitrary value of your choice to obtain reproducible results.
If you have not set this value explicitly in the command line options, Hyperopt seeds the random state with some random value for you. The random state value for each Hyperopt run is shown in the log, so you can copy and paste it into the --random-state command line option to repeat the set of the initial random epochs used.
If you have not changed anything in the command line options, configuration, timerange, Strategy and Hyperopt classes, historical data and the Loss Function -- you should obtain same hyper-optimization results with same random state value used.
"},{"location":"hyperopt/#output-formatting","title":"Output formatting","text":"By default, hyperopt prints colorized results -- epochs with positive profit are printed in the green color. This highlighting helps you find epochs that can be interesting for later analysis. Epochs with zero total profit or with negative profits (losses) are printed in the normal color. If you do not need colorization of results (for instance, when you are redirecting hyperopt output to a file) you can switch colorization off by specifying the --no-color option in the command line.
You can use the --print-all command line option if you would like to see all results in the hyperopt output, not only the best ones. When --print-all is used, current best results are also colorized by default -- they are printed in bold (bright) style. This can also be switched off with the --no-color command line option.
Windows and color output
Windows does not support color-output natively, therefore it is automatically disabled. To have color-output for hyperopt running under windows, please consider using WSL.
"},{"location":"hyperopt/#position-stacking-and-disabling-max-market-positions","title":"Position stacking and disabling max market positions","text":"In some situations, you may need to run Hyperopt (and Backtesting) with the --eps/--enable-position-staking argument, or you may need to set max_open_trades to a very high number to disable the limit on the number of open trades.
By default, hyperopt emulates the behavior of the Freqtrade Live Run/Dry Run, where only one open trade per pair is allowed. The total number of trades open for all pairs is also limited by the max_open_trades setting. During Hyperopt/Backtesting this may lead to potential trades being hidden (or masked) by already open trades.
The --eps/--enable-position-stacking argument allows emulation of buying the same pair multiple times. Using --max-open-trades with a very high number will disable the limit on the number of open trades.
Note
Dry/live runs will NOT use position stacking - therefore it does make sense to also validate the strategy without this as it's closer to reality.
You can also enable position stacking in the configuration file by explicitly setting \"position_stacking\"=true.
As hyperopt consumes a lot of memory (the complete data needs to be in memory once per parallel backtesting process), it's likely that you run into \"out of memory\" errors. To combat these, you have multiple options:
--timerange <timerange>).--timeframe-detail (this loads a lot of additional data into memory).-j <n>).--analyze-per-epoch if you're using a lot of parameters with .range functionality.If you see The objective has been evaluated at this point before. - then this is a sign that your space has been exhausted, or is close to that. Basically all points in your space have been hit (or a local minima has been hit) - and hyperopt does no longer find points in the multi-dimensional space it did not try yet. Freqtrade tries to counter the \"local minima\" problem by using new, randomized points in this case.
Example:
buy_ema_short = IntParameter(5, 20, default=10, space=\"buy\", optimize=True)\n# This is the only parameter in the buy space\nThe buy_ema_short space has 15 possible values (5, 6, ... 19, 20). If you now run hyperopt for the buy space, hyperopt will only have 15 values to try before running out of options. Your epochs should therefore be aligned to the possible values - or you should be ready to interrupt a run if you norice a lot of The objective has been evaluated at this point before. warnings.
After you run Hyperopt for the desired amount of epochs, you can later list all results for analysis, select only best or profitable once, and show the details for any of the epochs previously evaluated. This can be done with the hyperopt-list and hyperopt-show sub-commands. The usage of these sub-commands is described in the Utils chapter.
If you want to output debug messages from your strategy, you can use the logging module. By default, Freqtrade will output all messages with a level of INFO or higher.
import logging\n\n\nlogger = logging.getLogger(__name__)\n\n\nclass MyAwesomeStrategy(IStrategy):\n ...\n\n def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n logger.info(\"This is a debug message\")\n ...\nusing print
Messages printed via print() will not be shown in the hyperopt output unless parallelism is disabled (-j 1). It is recommended to use the logging module instead.
Once the optimized strategy has been implemented into your strategy, you should backtest this strategy to make sure everything is working as expected.
To achieve same the results (number of trades, their durations, profit, etc.) as during Hyperopt, please use the same configuration and parameters (timerange, timeframe, ...) used for hyperopt for Backtesting.
"},{"location":"hyperopt/#why-do-my-backtest-results-not-match-my-hyperopt-results","title":"Why do my backtest results not match my hyperopt results?","text":"Should results not match, check the following factors:
populate_indicators() where they will be calculated only once for all epochs. If you are, for example, trying to optimise multiple SMA timeperiod values, the hyperoptable timeperiod parameter should be placed in populate_entry_trend() which is calculated every epoch. See Optimizing an indicator parameter.stoploss, max_open_trades or trailing_stop).--space protection, protections are auto-enabled for hyperopting.This page explains how to prepare your environment for running the bot.
The freqtrade documentation describes various ways to install freqtrade
Please consider using the prebuilt docker images to get started quickly while evaluating how freqtrade works.
"},{"location":"installation/#information","title":"Information","text":"For Windows installation, please use the windows installation guide.
The easiest way to install and run Freqtrade is to clone the bot Github repository and then run the ./setup.sh script, if it's available for your platform.
Version considerations
When cloning the repository the default working branch has the name develop. This branch contains all last features (can be considered as relatively stable, thanks to automated tests). The stable branch contains the code of the last release (done usually once per month on an approximately one week old snapshot of the develop branch to prevent packaging bugs, so potentially it's more stable).
Note
Python3.11 or higher and the corresponding pip are assumed to be available. The install-script will warn you and stop if that's not the case. git is also needed to clone the Freqtrade repository. Also, python headers (python<yourversion>-dev / python<yourversion>-devel) must be available for the installation to complete successfully.
Up-to-date clock
The clock on the system running the bot must be accurate, synchronized to a NTP server frequently enough to avoid problems with communication to the exchanges.
"},{"location":"installation/#requirements","title":"Requirements","text":"These requirements apply to both Script Installation and Manual Installation.
ARM64 systems
If you are running an ARM64 system (like a MacOS M1 or an Oracle VM), please use docker to run freqtrade. While native installation is possible with some manual effort, this is not supported at the moment.
"},{"location":"installation/#install-guide","title":"Install guide","text":"We've included/collected install instructions for Ubuntu, MacOS, and Windows. These are guidelines and your success may vary with other distros. OS Specific steps are listed first, the common section below is necessary for all systems.
Note
Python3.11 or higher and the corresponding pip are assumed to be available.
Debian/UbuntuMacOSRaspberryPi/RaspbianThe following assumes the latest Raspbian Buster lite image. This image comes with python3.11 preinstalled, making it easy to get freqtrade up and running.
Tested using a Raspberry Pi 3 with the Raspbian Buster lite image, all updates applied.
sudo apt-get install python3-venv libatlas-base-dev cmake curl libffi-dev\n# Use piwheels.org to speed up installation\nsudo echo \"[global]\\nextra-index-url=https://www.piwheels.org/simple\" > tee /etc/pip.conf\n\ngit clone https://github.com/freqtrade/freqtrade.git\ncd freqtrade\n\nbash setup.sh -i\nInstallation duration
Depending on your internet speed and the Raspberry Pi version, installation can take multiple hours to complete. Due to this, we recommend to use the pre-build docker-image for Raspberry, by following the Docker quickstart documentation
Note
The above does not install hyperopt dependencies. To install these, please use python3 -m pip install -e .[hyperopt]. We do not advise to run hyperopt on a Raspberry Pi, since this is a very resource-heavy operation, which should be done on powerful machine.
# update repository\nsudo apt-get update\n\n# install packages\nsudo apt install -y python3-pip python3-venv python3-dev python3-pandas git curl\nInstall Homebrew if you don't have it already.
# install packages\nbrew install gettext libomp\nNote
The setup.sh script will install these dependencies for you - assuming brew is installed on your system.
Freqtrade is an open source crypto-currency trading bot, whose code is hosted on github.com
# Download `develop` branch of freqtrade repository\ngit clone https://github.com/freqtrade/freqtrade.git\n\n# Enter downloaded directory\ncd freqtrade\n\n# your choice (1): novice user\ngit checkout stable\n\n# your choice (2): advanced user\ngit checkout develop\n(1) This command switches the cloned repository to the use of the stable branch. It's not needed, if you wish to stay on the (2) develop branch.
You may later switch between branches at any time with the git checkout stable/git checkout develop commands.
An alternative way to install Freqtrade is from pypi. The downside is that this method requires ta-lib to be correctly installed beforehand, and is therefore currently not the recommended way to install Freqtrade.
pip install freqtrade\nFirst of the ways to install Freqtrade, is to use provided the Linux/MacOS ./setup.sh script, which install all dependencies and help you configure the bot.
Make sure you fulfill the Requirements and have downloaded the Freqtrade repository.
"},{"location":"installation/#use-setupsh-install-linuxmacos","title":"Use /setup.sh -install (Linux/MacOS)","text":"If you are on Debian, Ubuntu or MacOS, freqtrade provides the script to install freqtrade.
# --install, Install freqtrade from scratch\n./setup.sh -i\nEach time you open a new terminal, you must run source .venv/bin/activate to activate your virtual environment.
# activate virtual environment\nsource ./.venv/bin/activate\nYou are now ready to run the bot.
"},{"location":"installation/#other-options-of-setupsh-script","title":"Other options of /setup.sh script","text":"You can as well update, configure and reset the codebase of your bot with ./script.sh
# --update, Command git pull to update.\n./setup.sh -u\n# --reset, Hard reset your develop/stable branch.\n./setup.sh -r\n** --install **\n\nWith this option, the script will install the bot and most dependencies:\nYou will need to have git and python3.11+ installed beforehand for this to work.\n\n* Mandatory software as: `ta-lib`\n* Setup your virtualenv under `.venv/`\n\nThis option is a combination of installation tasks and `--reset`\n\n** --update **\n\nThis option will pull the last version of your current branch and update your virtualenv. Run the script with this option periodically to update your bot.\n\n** --reset **\n\nThis option will hard reset your branch (only if you are on either `stable` or `develop`) and recreate your virtualenv.\nMake sure you fulfill the Requirements and have downloaded the Freqtrade repository.
"},{"location":"installation/#setup-python-virtual-environment-virtualenv","title":"Setup Python virtual environment (virtualenv)","text":"You will run freqtrade in separated virtual environment
# create virtualenv in directory /freqtrade/.venv\npython3 -m venv .venv\n\n# run virtualenv\nsource .venv/bin/activate\npython3 -m pip install --upgrade pip\npython3 -m pip install -r requirements.txt\n# install freqtrade\npython3 -m pip install -e .\nYou are now ready to run the bot.
"},{"location":"installation/#optional-post-installation-tasks","title":"(Optional) Post-installation Tasks","text":"Note
If you run the bot on a server, you should consider using Docker or a terminal multiplexer like screen or tmux to avoid that the bot is stopped on logout.
On Linux with software suite systemd, as an optional post-installation task, you may wish to setup the bot to run as a systemd service or configure it to send the log messages to the syslog/rsyslog or journald daemons. See Advanced Logging for details.
Freqtrade can also be installed with Miniconda or Anaconda. We recommend using Miniconda as it's installation footprint is smaller. Conda will automatically prepare and manage the extensive library-dependencies of the Freqtrade program.
"},{"location":"installation/#what-is-conda","title":"What is Conda?","text":"Conda is a package, dependency and environment manager for multiple programming languages: conda docs
"},{"location":"installation/#installation-with-conda_1","title":"Installation with conda","text":""},{"location":"installation/#install-conda","title":"Install Conda","text":"Installing on linux
Installing on windows
Answer all questions. After installation, it is mandatory to turn your terminal OFF and ON again.
"},{"location":"installation/#freqtrade-download","title":"Freqtrade download","text":"Download and install freqtrade.
# download freqtrade\ngit clone https://github.com/freqtrade/freqtrade.git\n\n# enter downloaded directory 'freqtrade'\ncd freqtrade \nconda create --name freqtrade python=3.12\nCreating Conda Environment
The conda command create -n automatically installs all nested dependencies for the selected libraries, general structure of installation command is:
# choose your own packages\nconda env create -n [name of the environment] [python version] [packages]\nTo check available environments, type
conda env list\nEnter installed environment
# enter conda environment\nconda activate freqtrade\n\n# exit conda environment - don't do it now\nconda deactivate\nInstall last python dependencies with pip
python3 -m pip install --upgrade pip\npython3 -m pip install -r requirements.txt\npython3 -m pip install -e .\nYou are now ready to run the bot.
"},{"location":"installation/#important-shortcuts","title":"Important shortcuts","text":"# list installed conda environments\nconda env list\n\n# activate base environment\nconda activate\n\n# activate freqtrade environment\nconda activate freqtrade\n\n#deactivate any conda environments\nconda deactivate \nNew heavy packages
It may happen that creating a new Conda environment, populated with selected packages at the moment of creation takes less time than installing a large, heavy library or application, into previously set environment.
pip install within conda
The documentation of conda says that pip should NOT be used within conda, because internal problems can occur. However, they are rare. Anaconda Blogpost
Nevertheless, that is why, the conda-forge channel is preferred:
pip)conda-forge works better with pipHappy trading!
"},{"location":"installation/#you-are-ready","title":"You are ready","text":"You've made it this far, so you have successfully installed freqtrade.
"},{"location":"installation/#initialize-the-configuration","title":"Initialize the configuration","text":"# Step 1 - Initialize user folder\nfreqtrade create-userdir --userdir user_data\n\n# Step 2 - Create a new configuration file\nfreqtrade new-config --config user_data/config.json\nYou are ready to run, read Bot Configuration, remember to start with dry_run: True and verify that everything is working.
To learn how to setup your configuration, please refer to the Bot Configuration documentation page.
"},{"location":"installation/#start-the-bot","title":"Start the Bot","text":"freqtrade trade --config user_data/config.json --strategy SampleStrategy\nWarning
You should read through the rest of the documentation, backtest the strategy you're going to use, and use dry-run before enabling trading with real money.
"},{"location":"installation/#troubleshooting","title":"Troubleshooting","text":""},{"location":"installation/#common-problem-command-not-found","title":"Common problem: \"command not found\"","text":"If you used (1)Script or (2)Manual installation, you need to run the bot in virtual environment. If you get error as below, make sure venv is active.
# if:\nbash: freqtrade: command not found\n\n# then activate your virtual environment\nsource ./.venv/bin/activate\nNewer versions of MacOS may have installation failed with errors like error: command 'g++' failed with exit status 1.
This error will require explicit installation of the SDK Headers, which are not installed by default in this version of MacOS. For MacOS 10.14, this can be accomplished with the below command.
open /Library/Developer/CommandLineTools/Packages/macOS_SDK_headers_for_macOS_10.14.pkg\nIf this file is inexistent, then you're probably on a different version of MacOS, so you may need to consult the internet for specific resolution details.
"},{"location":"leverage/","title":"Trading with Leverage","text":"Beta feature
This feature is still in it's testing phase. Should you notice something you think is wrong please let us know via Discord or via Github Issue.
Multiple bots on one account
You can't run 2 bots on the same account with leverage. For leveraged / margin trading, freqtrade assumes it's the only user of the account, and all liquidation levels are calculated based on this assumption.
Trading with leverage is very risky
Do not trade with a leverage > 1 using a strategy that hasn't shown positive results in a live run using the spot market. Check the stoploss of your strategy. With a leverage of 2, a stoploss of 0.5 (50%) would be too low, and these trades would be liquidated before reaching that stoploss. We do not assume any responsibility for eventual losses that occur from using this software or this mode.
Please only use advanced trading modes when you know how freqtrade (and your strategy) works. Also, never risk more than what you can afford to lose.
If you already have an existing strategy, please read the strategy migration guide to migrate your strategy from a freqtrade v2 strategy, to strategy of version 3 which can short and trade futures.
"},{"location":"leverage/#shorting","title":"Shorting","text":"Shorting is not possible when trading with trading_mode set to spot. To short trade, trading_mode must be set to margin(currently unavailable) or futures, with margin_mode set to cross(currently unavailable) or isolated
For a strategy to short, the strategy class must set the class variable can_short = True
Please read strategy customization for instructions on how to set signals to enter and exit short trades.
"},{"location":"leverage/#understand-trading_mode","title":"Understandtrading_mode","text":"The possible values are: spot (default), margin(Currently unavailable) or futures.
Regular trading mode (low risk)
With leverage, a trader borrows capital from the exchange. The capital must be re-payed fully to the exchange (potentially with interest), and the trader keeps any profits, or pays any losses, from any trades made using the borrowed capital.
Because the capital must always be re-payed, exchanges will liquidate (forcefully sell the traders assets) a trade made using borrowed capital when the total value of assets in the leverage account drops to a certain point (a point where the total value of losses is less than the value of the collateral that the trader actually owns in the leverage account), in order to ensure that the trader has enough capital to pay the borrowed assets back to the exchange. The exchange will also charge a liquidation fee, adding to the traders losses.
For this reason, DO NOT TRADE WITH LEVERAGE IF YOU DON'T KNOW EXACTLY WHAT YOUR DOING. LEVERAGE TRADING IS HIGH RISK, AND CAN RESULT IN THE VALUE OF YOUR ASSETS DROPPING TO 0 VERY QUICKLY, WITH NO CHANCE OF INCREASING IN VALUE AGAIN.
"},{"location":"leverage/#margin-currently-unavailable","title":"Margin (currently unavailable)","text":"Trading occurs on the spot market, but the exchange lends currency to you in an amount equal to the chosen leverage. You pay the amount lent to you back to the exchange with interest, and your profits/losses are multiplied by the leverage specified.
"},{"location":"leverage/#futures","title":"Futures","text":"Perpetual swaps (also known as Perpetual Futures) are contracts traded at a price that is closely tied to the underlying asset they are based off of (ex.). You are not trading the actual asset but instead are trading a derivative contract. Perpetual swap contracts can last indefinitely, in contrast to futures or option contracts.
In addition to the gains/losses from the change in price of the futures contract, traders also exchange funding fees, which are gains/losses worth an amount that is derived from the difference in price between the futures contract and the underlying asset. The difference in price between a futures contract and the underlying asset varies between exchanges.
To trade in futures markets, you'll have to set trading_mode to \"futures\". You will also have to pick a \"margin mode\" (explanation below) - with freqtrade currently only supporting isolated margin.
\"trading_mode\": \"futures\",\n\"margin_mode\": \"isolated\"\nFreqtrade follows the ccxt naming conventions for futures. A futures pair will therefore have the naming of base/quote:settle (e.g. ETH/USDT:USDT).
On top of trading_mode - you will also have to configure your margin_mode. While freqtrade currently only supports one margin mode, this will change, and by configuring it now you're all set for future updates.
The possible values are: isolated, or cross(currently unavailable).
Each market(trading pair), keeps collateral in a separate account
\"margin_mode\": \"isolated\"\nOne account is used to share collateral between markets (trading pairs). Margin is taken from total account balance to avoid liquidation when needed.
\"margin_mode\": \"cross\"\nPlease read the exchange specific notes for exchanges that support this mode and how they differ.
"},{"location":"leverage/#set-leverage-to-use","title":"Set leverage to use","text":"Different strategies and risk profiles will require different levels of leverage. While you could configure one static leverage value - freqtrade offers you the flexibility to adjust this via strategy leverage callback - which allows you to use different leverages by pair, or based on some other factor benefitting your strategy result.
If not implemented, leverage defaults to 1x (no leverage).
Warning
Higher leverage also equals higher risk - be sure you fully understand the implications of using leverage!
"},{"location":"leverage/#understand-liquidation_buffer","title":"Understandliquidation_buffer","text":"Defaults to 0.05
A ratio specifying how large of a safety net to place between the liquidation price and the stoploss to prevent a position from reaching the liquidation price. This artificial liquidation price is calculated as:
freqtrade_liquidation_price = liquidation_price \u00b1 (abs(open_rate - liquidation_price) * liquidation_buffer)
\u00b1 = + for long trades\u00b1 = - for short tradesPossible values are any floats between 0.0 and 0.99
ex: If a trade is entered at a price of 10 coin/USDT, and the liquidation price of this trade is 8 coin/USDT, then with liquidation_buffer set to 0.05 the minimum stoploss for this trade would be \\(8 + ((10 - 8) * 0.05) = 8 + 0.1 = 8.1\\)
A liquidation_buffer of 0.0, or a low liquidation_buffer is likely to result in liquidations, and liquidation fees
Currently Freqtrade is able to calculate liquidation prices, but does not calculate liquidation fees. Setting your liquidation_buffer to 0.0, or using a low liquidation_buffer could result in your positions being liquidated. Freqtrade does not track liquidation fees, so liquidations will result in inaccurate profit/loss results for your bot. If you use a low liquidation_buffer, it is recommended to use stoploss_on_exchange if your exchange supports this.
For futures data, exchanges commonly provide the futures candles, the marks, and the funding rates. However, it is common that whilst candles and marks might be available, the funding rates are not. This can affect backtesting timeranges, i.e. you may only be able to test recent timeranges and not earlier, experiencing the No data found. Terminating. error. To get around this, add the futures_funding_rate config option as listed in configuration.md, and it is recommended that you set this to 0, unless you know a given specific funding rate for your pair, exchange and timerange. Setting this to anything other than 0 can have drastic effects on your profit calculations within strategy, e.g. within the custom_exit, custom_stoploss, etc functions.
This will mean your backtests are inaccurate.
This will not overwrite funding rates that are available from the exchange, but bear in mind that setting a false funding rate will mean backtesting results will be inaccurate for historical timeranges where funding rates are not available.
"},{"location":"leverage/#developer","title":"Developer","text":""},{"location":"leverage/#margin-mode_1","title":"Margin mode","text":"For shorts, the currency which pays the interest fee for the borrowed currency is purchased at the same time of the closing trade (This means that the amount purchased in short closing trades is greater than the amount sold in short opening trades).
For longs, the currency which pays the interest fee for the borrowed will already be owned by the user and does not need to be purchased. The interest is subtracted from the close_value of the trade.
All Fees are included in current_profit calculations during the trade.
Funding fees are either added or subtracted from the total amount of a trade
"},{"location":"lookahead-analysis/","title":"Lookahead analysis","text":"This page explains how to validate your strategy in terms of lookahead bias.
Lookahead bias is the bane of any strategy since it is sometimes very easy to introduce this bias, but can be very hard to detect.
Backtesting initializes all timestamps (loads the whole dataframe into memory) and calculates all indicators at once. This means that if your indicators or entry/exit signals look into future candles, this will falsify your backtest.
The lookahead-analysis command requires historic data to be available. To learn how to get data for the pairs and exchange you're interested in, head over to the Data Downloading section of the documentation. lookahead-analysis also supports freqai strategies.
This command internally chains backtests and pokes at the strategy to provoke it to show lookahead bias. This is done by not looking at the strategy code itself, but at changed indicator values and moved entries/exits compared to the full backtest.
lookahead-analysis can use the typical options of Backtesting, but forces the following options:
--cache is forced to \"none\".--max-open-trades is forced to be at least equal to the number of pairs.--dry-run-wallet is forced to be basically infinite (1 billion).--stake-amount is forced to be a static 10000 (10k).--enable-protections is forced to be off.order_types are forced to be \"market\" (late entries) unless --lookahead-allow-limit-orders is set.These are set to avoid users accidentally generating false positives.
"},{"location":"lookahead-analysis/#lookahead-analysis-command-reference","title":"Lookahead-analysis command reference","text":"usage: freqtrade lookahead-analysis [-h] [-v] [--no-color] [--logfile FILE]\n [-V] [-c PATH] [-d PATH] [--userdir PATH]\n [-s NAME] [--strategy-path PATH]\n [--recursive-strategy-search]\n [--freqaimodel NAME]\n [--freqaimodel-path PATH] [-i TIMEFRAME]\n [--timerange TIMERANGE]\n [--data-format-ohlcv {json,jsongz,feather,parquet}]\n [--max-open-trades INT]\n [--stake-amount STAKE_AMOUNT]\n [--fee FLOAT] [-p PAIRS [PAIRS ...]]\n [--enable-protections]\n [--enable-dynamic-pairlist]\n [--dry-run-wallet DRY_RUN_WALLET]\n [--timeframe-detail TIMEFRAME_DETAIL]\n [--strategy-list STRATEGY_LIST [STRATEGY_LIST ...]]\n [--export {none,trades,signals}]\n [--backtest-filename PATH]\n [--backtest-directory PATH]\n [--freqai-backtest-live-models]\n [--minimum-trade-amount INT]\n [--targeted-trade-amount INT]\n [--lookahead-analysis-exportfilename LOOKAHEAD_ANALYSIS_EXPORTFILENAME]\n [--allow-limit-orders]\n\noptions:\n -h, --help show this help message and exit\n -i TIMEFRAME, --timeframe TIMEFRAME\n Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).\n --timerange TIMERANGE\n Specify what timerange of data to use.\n --data-format-ohlcv {json,jsongz,feather,parquet}\n Storage format for downloaded candle (OHLCV) data.\n (default: `feather`).\n --max-open-trades INT\n Override the value of the `max_open_trades`\n configuration setting.\n --stake-amount STAKE_AMOUNT\n Override the value of the `stake_amount` configuration\n setting.\n --fee FLOAT Specify fee ratio. Will be applied twice (on trade\n entry and exit).\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --enable-protections, --enableprotections\n Enable protections for backtesting. Will slow\n backtesting down by a considerable amount, but will\n include configured protections\n --enable-dynamic-pairlist\n Enables dynamic pairlist refreshes in backtesting. The\n pairlist will be generated for each new candle if\n you're using a pairlist handler that supports this\n feature, for example, ShuffleFilter.\n --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET\n Starting balance, used for backtesting / hyperopt and\n dry-runs.\n --timeframe-detail TIMEFRAME_DETAIL\n Specify detail timeframe for backtesting (`1m`, `5m`,\n `30m`, `1h`, `1d`).\n --strategy-list STRATEGY_LIST [STRATEGY_LIST ...]\n Provide a space-separated list of strategies to\n backtest. Please note that timeframe needs to be set\n either in config or via command line. When using this\n together with `--export trades`, the strategy-name is\n injected into the filename (so `backtest-data.json`\n becomes `backtest-data-SampleStrategy.json`\n --export {none,trades,signals}\n Export backtest results (default: trades).\n --backtest-filename PATH, --export-filename PATH\n Use this filename for backtest results.Example:\n `--backtest-\n filename=backtest_results_2020-09-27_16-20-48.json`.\n Assumes either `user_data/backtest_results/` or\n `--export-directory` as base directory.\n --backtest-directory PATH, --export-directory PATH\n Directory to use for backtest results. Example:\n `--export-directory=user_data/backtest_results/`.\n --freqai-backtest-live-models\n Run backtest with ready models.\n --minimum-trade-amount INT\n Minimum trade amount for lookahead-analysis\n --targeted-trade-amount INT\n Targeted trade amount for lookahead analysis\n --lookahead-analysis-exportfilename LOOKAHEAD_ANALYSIS_EXPORTFILENAME\n Use this csv-filename to store lookahead-analysis-\n results\n --allow-limit-orders Allow limit orders in lookahead analysis (could cause\n false positives in lookahead analysis results).\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n\nStrategy arguments:\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n --freqaimodel NAME Specify a custom freqaimodels.\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\nNote
The above output was reduced to options that lookahead-analysis adds on top of regular backtesting commands.
Many strategies, without the programmer knowing, have fallen prey to lookahead bias. This typically makes the strategy backtest look profitable, sometimes to extremes, but this is not realistic as the strategy is \"cheating\" by looking at data it would not have in dry or live modes.
The reason why strategies can \"cheat\" is because the freqtrade backtesting process populates the full dataframe including all candle timestamps at the outset. If the programmer is not careful or oblivious how things work internally (which sometimes can be really hard to find out) then the strategy will look into the future.
This command is made to try to verify the validity in the form of the aforementioned lookahead bias.
"},{"location":"lookahead-analysis/#how-does-the-command-work","title":"How does the command work?","text":"It will start with a backtest of all pairs to generate a baseline for indicators and entries/exits. After this initial backtest runs, it will look if the minimum-trade-amount is met and if not cancel the lookahead-analysis for this strategy. If this happens, use a wider timerange to get more trades for the analysis, or use a timerange where more trades occur.
After setting the baseline it will then do additional backtest runs for every entry and exit separately. When these verification backtests complete, it will compare both dataframes (baseline and sliced) for any difference in columns' value and report the bias. After all signals have been verified or falsified a result table will be generated for the user to see.
"},{"location":"lookahead-analysis/#how-to-find-and-remove-bias-how-can-i-salvage-a-biased-strategy","title":"How to find and remove bias? How can I salvage a biased strategy?","text":"If you found a biased strategy online and want to have the same results, just without bias, then you will be out of luck most of the time. Usually the bias in the strategy is THE driving factor for \"too good to be true\" profits. Removing conditions or indicators that push the profits up from bias will usually make the strategy significantly worse. You might be able to salvage it partially if the biased indicators or conditions are not the core of the strategy, or there are other entry and exit signals that are not biased.
"},{"location":"lookahead-analysis/#examples-of-lookahead-bias","title":"Examples of lookahead-bias","text":"shift(-10) looks 10 candles into the future.iloc[] in populate_* functions to access a specific row in the dataframe..mean(), .min() and .max(), without a rolling window, will calculate the value over the whole dataframe, so the signal candle will \"see\" a value including future candles. A non-biased example would be to look back candles using rolling() instead: e.g. dataframe['volume_mean_12'] = dataframe['volume'].rolling(12).mean()ta.MACD(dataframe, 12, 26, 1) will introduce bias with a signalperiod of 1.filename: name of the checked strategy filestrategy: checked strategy class namehas_bias: result of the lookahead-analysis. No would be good, Yes would be bad.total_signals: number of checked signals (default is 20)biased_entry_signals: found bias in that many entriesbiased_exit_signals: found bias in that many exitsbiased_indicators: shows you the indicators themselves that are defined in populate_indicatorsYou might get false positives in the biased_exit_signals if you have biased entry signals paired with those exits. However, a biased entry will usually result in a biased exit too, even if the exit itself does not produce the bias - especially if your entry and exit conditions use the same biased indicator.
Address the bias in the entries first, then address the exits.
"},{"location":"lookahead-analysis/#caveats","title":"Caveats","text":"lookahead-analysis can only verify / falsify the trades it calculated and verified. If the strategy has many different signals / signal types, it's up to you to select appropriate parameters to ensure that all signals have triggered at least once. Signals that are not triggered will not have been verified. This would lead to a false-negative, i.e. the strategy will be reported as non-biased.lookahead-analysis has access to the same backtesting options and this can introduce problems. Please don't use any options like enabling position stacking as this will distort the number of checked signals. If you decide to do so, then make doubly sure that you won't ever run out of max_open_trades slots, and that you have enough capital in the backtest wallet configuration.custom_entry_price() and custom_exit_price() callbacks can cause late / delayed entries and exists, causing false positives. To avoid this - market orders are forced for this command. This implicitly means that custom_entry_price() and custom_exit_price() callbacks are not called. Using --lookahead-allow-limit-orders will skip the override and use your configured order types - however has shown to eventually produce false positives.biased_indicators column will falsely flag FreqAI target indicators defined in set_freqai_targets() as biased. These are not biased and can safely be ignored.This page explains how to plot prices, indicators and profits.
Deprecated
The commands described in this page (plot-dataframe, plot-profit) should be considered deprecated and are in maintenance mode. This is mostly for the performance problems even medium sized plots can cause, but also because \"store a file and open it in a browser\" isn't very intuitive from a UI perspective.
While there are no immediate plans to remove them, they are not actively maintained - and may be removed short-term should major changes be required to keep them working.
Please use FreqUI for plotting needs, which doesn't struggle with the same performance problems.
"},{"location":"plotting/#installation-setup","title":"Installation / Setup","text":"Plotting modules use the Plotly library. You can install / upgrade this by running the following command:
pip install -U -r requirements-plot.txt\nThe freqtrade plot-dataframe subcommand shows an interactive graph with three subplots:
--indicators2Possible arguments:
usage: freqtrade plot-dataframe [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH] [-s NAME]\n [--strategy-path PATH]\n [--recursive-strategy-search]\n [--freqaimodel NAME] [--freqaimodel-path PATH]\n [-p PAIRS [PAIRS ...]]\n [--indicators1 INDICATORS1 [INDICATORS1 ...]]\n [--indicators2 INDICATORS2 [INDICATORS2 ...]]\n [--plot-limit INT] [--db-url PATH]\n [--trade-source {DB,file}]\n [--export {none,trades,signals}]\n [--backtest-filename PATH]\n [--timerange TIMERANGE] [-i TIMEFRAME]\n [--no-trades]\n\noptions:\n -h, --help show this help message and exit\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --indicators1 INDICATORS1 [INDICATORS1 ...]\n Set indicators from your strategy you want in the\n first row of the graph. Space-separated list. Example:\n `ema3 ema5`. Default: `['sma', 'ema3', 'ema5']`.\n --indicators2 INDICATORS2 [INDICATORS2 ...]\n Set indicators from your strategy you want in the\n third row of the graph. Space-separated list. Example:\n `fastd fastk`. Default: `['macd', 'macdsignal']`.\n --plot-limit INT Specify tick limit for plotting. Notice: too high\n values cause huge files. Default: 750.\n --db-url PATH Override trades database URL, this is useful in custom\n deployments (default: `sqlite:///tradesv3.sqlite` for\n Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for\n Dry Run).\n --trade-source {DB,file}\n Specify the source for trades (Can be DB or file\n (backtest file)) Default: file\n --export {none,trades,signals}\n Export backtest results (default: trades).\n --backtest-filename PATH, --export-filename PATH\n Use this filename for backtest results.Example:\n `--backtest-\n filename=backtest_results_2020-09-27_16-20-48.json`.\n Assumes either `user_data/backtest_results/` or\n `--export-directory` as base directory.\n --timerange TIMERANGE\n Specify what timerange of data to use.\n -i TIMEFRAME, --timeframe TIMEFRAME\n Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).\n --no-trades Skip using trades from backtesting file and DB.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n\nStrategy arguments:\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n --freqaimodel NAME Specify a custom freqaimodels.\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\nExample:
freqtrade plot-dataframe -p BTC/ETH --strategy AwesomeStrategy\nThe -p/--pairs argument can be used to specify pairs you would like to plot.
Note
The freqtrade plot-dataframe subcommand generates one plot-file per pair.
Specify custom indicators. Use --indicators1 for the main plot and --indicators2 for the subplot below (if values are in a different range than prices).
freqtrade plot-dataframe --strategy AwesomeStrategy -p BTC/ETH --indicators1 sma ema --indicators2 macd\nTo plot multiple pairs, separate them with a space:
freqtrade plot-dataframe --strategy AwesomeStrategy -p BTC/ETH XRP/ETH\nTo plot a timerange (to zoom in)
freqtrade plot-dataframe --strategy AwesomeStrategy -p BTC/ETH --timerange=20180801-20180805\nTo plot trades stored in a database use --db-url in combination with --trade-source DB:
freqtrade plot-dataframe --strategy AwesomeStrategy --db-url sqlite:///tradesv3.dry_run.sqlite -p BTC/ETH --trade-source DB\nTo plot trades from a backtesting result, use --export-filename <filename>
freqtrade plot-dataframe --strategy AwesomeStrategy --export-filename user_data/backtest_results/backtest-result.json -p BTC/ETH\nThe plot-dataframe subcommand requires backtesting data, a strategy and either a backtesting-results file or a database, containing trades corresponding to the strategy.
The resulting plot will have the following elements:
--indicators1.--indicators2.Bollinger Bands
Bollinger bands are automatically added to the plot if the columns bb_lowerband and bb_upperband exist, and are painted as a light blue area spanning from the lower band to the upper band.
An advanced plot configuration can be specified in the strategy in the plot_config parameter.
Additional features when using plot_config include:
The sample plot configuration below specifies fixed colors for the indicators. Otherwise, consecutive plots may produce different color schemes each time, making comparisons difficult. It also allows multiple subplots to display both MACD and RSI at the same time.
Plot type can be configured using type key. Possible types are:
scatter corresponding to plotly.graph_objects.Scatter class (default).bar corresponding to plotly.graph_objects.Bar class.Extra parameters to plotly.graph_objects.* constructor can be specified in plotly dict.
Sample configuration with inline comments explaining the process:
@property\ndef plot_config(self):\n \"\"\"\n There are a lot of solutions how to build the return dictionary.\n The only important point is the return value.\n Example:\n plot_config = {'main_plot': {}, 'subplots': {}}\n\n \"\"\"\n plot_config = {}\n plot_config['main_plot'] = {\n # Configuration for main plot indicators.\n # Assumes 2 parameters, emashort and emalong to be specified.\n f'ema_{self.emashort.value}': {'color': 'red'},\n f'ema_{self.emalong.value}': {'color': '#CCCCCC'},\n # By omitting color, a random color is selected.\n 'sar': {},\n # fill area between senkou_a and senkou_b\n 'senkou_a': {\n 'color': 'green', #optional\n 'fill_to': 'senkou_b',\n 'fill_label': 'Ichimoku Cloud', #optional\n 'fill_color': 'rgba(255,76,46,0.2)', #optional\n },\n # plot senkou_b, too. Not only the area to it.\n 'senkou_b': {}\n }\n plot_config['subplots'] = {\n # Create subplot MACD\n \"MACD\": {\n 'macd': {'color': 'blue', 'fill_to': 'macdhist'},\n 'macdsignal': {'color': 'orange'},\n 'macdhist': {'type': 'bar', 'plotly': {'opacity': 0.9}}\n },\n # Additional subplot RSI\n \"RSI\": {\n 'rsi': {'color': 'red'}\n }\n }\n\n return plot_config\nAssigning plot_config is also possible as Attribute (this used to be the default way). This has the disadvantage that strategy parameters are not available, preventing certain configurations from working.
plot_config = {\n 'main_plot': {\n # Configuration for main plot indicators.\n # Specifies `ema10` to be red, and `ema50` to be a shade of gray\n 'ema10': {'color': 'red'},\n 'ema50': {'color': '#CCCCCC'},\n # By omitting color, a random color is selected.\n 'sar': {},\n # fill area between senkou_a and senkou_b\n 'senkou_a': {\n 'color': 'green', #optional\n 'fill_to': 'senkou_b',\n 'fill_label': 'Ichimoku Cloud', #optional\n 'fill_color': 'rgba(255,76,46,0.2)', #optional\n },\n # plot senkou_b, too. Not only the area to it.\n 'senkou_b': {}\n },\n 'subplots': {\n # Create subplot MACD\n \"MACD\": {\n 'macd': {'color': 'blue', 'fill_to': 'macdhist'},\n 'macdsignal': {'color': 'orange'},\n 'macdhist': {'type': 'bar', 'plotly': {'opacity': 0.9}}\n },\n # Additional subplot RSI\n \"RSI\": {\n 'rsi': {'color': 'red'}\n }\n }\n }\nNote
The above configuration assumes that ema10, ema50, senkou_a, senkou_b, macd, macdsignal, macdhist and rsi are columns in the DataFrame created by the strategy.
Warning
plotly arguments are only supported with plotly library and will not work with freq-ui.
Trade position adjustments
If position_adjustment_enable / adjust_trade_position() is used, the trade initial buy price is averaged over multiple orders and the trade start price will most likely appear outside the candle range.
The plot-profit subcommand shows an interactive graph with three plots:
The first graph is good to get a grip of how the overall market progresses.
The second graph will show if your algorithm works or doesn't. Perhaps you want an algorithm that steadily makes small profits, or one that acts less often, but makes big swings. This graph will also highlight the start (and end) of the Max drawdown period.
The third graph can be useful to spot outliers, events in pairs that cause profit spikes.
The forth graph can help you analyze trade parallelism, showing how often max_open_trades have been maxed out.
Possible options for the freqtrade plot-profit subcommand:
usage: freqtrade plot-profit [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH] [-s NAME]\n [--strategy-path PATH]\n [--recursive-strategy-search]\n [--freqaimodel NAME] [--freqaimodel-path PATH]\n [-p PAIRS [PAIRS ...]] [--timerange TIMERANGE]\n [--export {none,trades,signals}]\n [--backtest-filename PATH] [--db-url PATH]\n [--trade-source {DB,file}] [-i TIMEFRAME]\n [--auto-open]\n\noptions:\n -h, --help show this help message and exit\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --timerange TIMERANGE\n Specify what timerange of data to use.\n --export {none,trades,signals}\n Export backtest results (default: trades).\n --backtest-filename PATH, --export-filename PATH\n Use this filename for backtest results.Example:\n `--backtest-\n filename=backtest_results_2020-09-27_16-20-48.json`.\n Assumes either `user_data/backtest_results/` or\n `--export-directory` as base directory.\n --db-url PATH Override trades database URL, this is useful in custom\n deployments (default: `sqlite:///tradesv3.sqlite` for\n Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for\n Dry Run).\n --trade-source {DB,file}\n Specify the source for trades (Can be DB or file\n (backtest file)) Default: file\n -i TIMEFRAME, --timeframe TIMEFRAME\n Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).\n --auto-open Automatically open generated plot.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n\nStrategy arguments:\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n --freqaimodel NAME Specify a custom freqaimodels.\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\nThe -p/--pairs argument, can be used to limit the pairs that are considered for this calculation.
Examples:
Use custom backtest-export file
freqtrade plot-profit -p LTC/BTC --export-filename user_data/backtest_results/backtest-result.json\nUse custom database
freqtrade plot-profit -p LTC/BTC --db-url sqlite:///tradesv3.sqlite --trade-source DB\nfreqtrade --datadir user_data/data/binance_save/ plot-profit -p LTC/BTC\nPairlist Handlers define the list of pairs (pairlist) that the bot should trade. They are configured in the pairlists section of the configuration settings.
In your configuration, you can use Static Pairlist (defined by the StaticPairList Pairlist Handler) and Dynamic Pairlist (defined by the VolumePairList and PercentChangePairList Pairlist Handlers).
Additionally, AgeFilter, DelistFilter, PrecisionFilter, PriceFilter, ShuffleFilter, SpreadFilter and VolatilityFilter act as Pairlist Filters, removing certain pairs and/or moving their positions in the pairlist.
If multiple Pairlist Handlers are used, they are chained and a combination of all Pairlist Handlers forms the resulting pairlist the bot uses for trading and backtesting. Pairlist Handlers are executed in the sequence they are configured. You can define either StaticPairList, VolumePairList, ProducerPairList, RemotePairList, MarketCapPairList or PercentChangePairList as the starting Pairlist Handler.
Inactive markets are always removed from the resulting pairlist. Explicitly blacklisted pairs (those in the pair_blacklist configuration setting) are also always removed from the resulting pairlist.
The pair blacklist (configured via exchange.pair_blacklist in the configuration) disallows certain pairs from trading. This can be as simple as excluding DOGE/BTC - which will remove exactly this pair.
The pair-blacklist does also support wildcards (in regex-style) - so BNB/.* will exclude ALL pairs that start with BNB. You may also use something like .*DOWN/BTC or .*UP/BTC to exclude leveraged tokens (check Pair naming conventions for your exchange!)
StaticPairList (default, if not configured differently)VolumePairListPercentChangePairListProducerPairListRemotePairListMarketCapPairListAgeFilterDelistFilterFullTradesFilterOffsetFilterPerformanceFilterPrecisionFilterPriceFilterShuffleFilterSpreadFilterRangeStabilityFilterVolatilityFilterTesting pairlists
Pairlist configurations can be quite tricky to get right. Best use freqUI in webserver mode or the test-pairlist utility sub-command to test your Pairlist configuration quickly.
By default, the StaticPairList method is used, which uses a statically defined pair whitelist from the configuration. The pairlist also supports wildcards (in regex-style) - so .*/BTC will include all pairs with BTC as a stake.
It uses configuration from exchange.pair_whitelist and exchange.pair_blacklist, which in the below example, will trade BTC/USDT and ETH/USDT - and will prevent BNB/USDT trading.
Both pair_*list parameters support regex - so values like .*/USDT would enable trading all pairs that are not in the blacklist.
\"exchange\": {\n \"name\": \"...\",\n // ... \n \"pair_whitelist\": [\n \"BTC/USDT\",\n \"ETH/USDT\",\n // ...\n ],\n \"pair_blacklist\": [\n \"BNB/USDT\",\n // ...\n ]\n},\n\"pairlists\": [\n {\"method\": \"StaticPairList\"}\n],\nBy default, only currently enabled pairs are allowed. To skip pair validation against active markets, set \"allow_inactive\": true within the StaticPairList configuration. This can be useful for backtesting expired pairs (like quarterly spot-markets).
When used in a \"follow-up\" position (e.g. after VolumePairlist), all pairs in 'pair_whitelist' will be added to the end of the pairlist.
VolumePairList employs sorting/filtering of pairs by their trading volume. It selects number_assets top pairs with sorting based on the sort_key (which can only be quoteVolume).
When used in the chain of Pairlist Handlers in a non-leading position (after StaticPairList and other Pairlist Filters), VolumePairList considers outputs of previous Pairlist Handlers, adding its sorting/selection of the pairs by the trading volume.
When used in the leading position of the chain of Pairlist Handlers, the pair_whitelist configuration setting is ignored. Instead, VolumePairList selects the top assets from all available markets with matching stake-currency on the exchange.
The refresh_period setting allows to define the period (in seconds), at which the pairlist will be refreshed. Defaults to 1800s (30 minutes). The pairlist cache (refresh_period) on VolumePairList is only applicable to generating pairlists. Filtering instances (not the first position in the list) will not apply any cache (beyond caching candles for the duration of the candle in advanced mode) and will always use up-to-date data.
VolumePairList is per default based on the ticker data from exchange, as reported by the ccxt library:
quoteVolume is the amount of quote (stake) currency traded (bought or sold) in last 24 hours.\"pairlists\": [\n {\n \"method\": \"VolumePairList\",\n \"number_assets\": 20,\n \"sort_key\": \"quoteVolume\",\n \"min_value\": 0,\n \"max_value\": 8000000,\n \"refresh_period\": 1800\n }\n],\nYou can define a minimum volume with min_value - which will filter out pairs with a volume lower than the specified value in the specified timerange. In addition to that, you can also define a maximum volume with max_value - which will filter out pairs with a volume higher than the specified value in the specified timerange.
VolumePairList can also operate in an advanced mode to build volume over a given timerange of specified candle size. It utilizes exchange historical candle data, builds a typical price (calculated by (open+high+low)/3) and multiplies the typical price with every candle's volume. The sum is the quoteVolume over the given range. This allows different scenarios, for a more smoothened volume, when using longer ranges with larger candle sizes, or the opposite when using a short range with small candles.
For convenience lookback_days can be specified, which will imply that 1d candles will be used for the lookback. In the example below the pairlist would be created based on the last 7 days:
\"pairlists\": [\n {\n \"method\": \"VolumePairList\",\n \"number_assets\": 20,\n \"sort_key\": \"quoteVolume\",\n \"min_value\": 0,\n \"refresh_period\": 86400,\n \"lookback_days\": 7\n }\n],\nRange look back and refresh period
When used in conjunction with lookback_days and lookback_timeframe the refresh_period can not be smaller than the candle size in seconds. As this will result in unnecessary requests to the exchanges API.
Performance implications when using lookback range
If used in first position in combination with lookback, the computation of the range based volume can be time and resource consuming, as it downloads candles for all tradable pairs. Hence it's highly advised to use the standard approach with VolumeFilter to narrow the pairlist down for further range volume calculation.
On some exchanges (like Gemini), regular VolumePairList does not work as the api does not natively provide 24h volume. This can be worked around by using candle data to build the volume. To roughly simulate 24h volume, you can use the following configuration. Please note that These pairlists will only refresh once per day.
\"pairlists\": [\n {\n \"method\": \"VolumePairList\",\n \"number_assets\": 20,\n \"sort_key\": \"quoteVolume\",\n \"min_value\": 0,\n \"refresh_period\": 86400,\n \"lookback_days\": 1\n }\n],\nMore sophisticated approach can be used, by using lookback_timeframe for candle size and lookback_period which specifies the amount of candles. This example will build the volume pairs based on a rolling period of 3 days of 1h candles:
\"pairlists\": [\n {\n \"method\": \"VolumePairList\",\n \"number_assets\": 20,\n \"sort_key\": \"quoteVolume\",\n \"min_value\": 0,\n \"refresh_period\": 3600,\n \"lookback_timeframe\": \"1h\",\n \"lookback_period\": 72\n }\n],\nNote
VolumePairList does not support backtesting mode.
PercentChangePairList filters and sorts pairs based on the percentage change in their price over the last 24 hours or any defined timeframe as part of advanced options. This allows traders to focus on assets that have experienced significant price movements, either positive or negative.
Configuration Options
number_assets: Specifies the number of top pairs to select based on the 24-hour percentage change.min_value: Sets a minimum percentage change threshold. Pairs with a percentage change below this value will be filtered out.max_value: Sets a maximum percentage change threshold. Pairs with a percentage change above this value will be filtered out.sort_direction: Specifies the order in which pairs are sorted based on their percentage change. Accepts two values: asc for ascending order and desc for descending order.refresh_period: Defines the interval (in seconds) at which the pairlist will be refreshed. The default is 1800 seconds (30 minutes).lookback_days: Number of days to look back. When lookback_days is selected, the lookback_timeframe is defaulted to 1 day.lookback_timeframe: Timeframe to use for the lookback period.lookback_period: Number of periods to look back at.When PercentChangePairList is used after other Pairlist Handlers, it will operate on the outputs of those handlers. If it is the leading Pairlist Handler, it will select pairs from all available markets with the specified stake currency.
PercentChangePairList uses ticker data from the exchange, provided via the ccxt library: The percentage change is calculated as the change in price over the last 24 hours.
On some exchanges (like HTX), regular PercentChangePairList does not work as the api does not natively provide 24h percent change in price. This can be worked around by using candle data to calculate the percentage change. To roughly simulate 24h percent change, you can use the following configuration. Please note that these pairlists will only refresh once per day.
\"pairlists\": [\n {\n \"method\": \"PercentChangePairList\",\n \"number_assets\": 20,\n \"min_value\": 0,\n \"refresh_period\": 86400,\n \"lookback_days\": 1\n }\n],\nExample Configuration to Read from Ticker
\"pairlists\": [\n {\n \"method\": \"PercentChangePairList\",\n \"number_assets\": 15,\n \"min_value\": -10,\n \"max_value\": 50\n }\n],\nIn this configuration:
Example Configuration to Read from Candles
\"pairlists\": [\n {\n \"method\": \"PercentChangePairList\",\n \"number_assets\": 15,\n \"sort_key\": \"percentage\",\n \"min_value\": 0,\n \"refresh_period\": 3600,\n \"lookback_timeframe\": \"1h\",\n \"lookback_period\": 72\n }\n],\nThis example builds the percent change pairs based on a rolling period of 3 days of 1-hour candles by using lookback_timeframe for candle size and lookback_period which specifies the number of candles.
The percent change in price is calculated using the following formula, which expresses the percentage difference between the current candle's close price and the previous candle's close price, as defined by the specified timeframe and lookback period:
\\[ Percent Change = (\\frac{Current Close - Previous Close}{Previous Close}) * 100 \\]Range look back and refresh period
When used in conjunction with lookback_days and lookback_timeframe the refresh_period can not be smaller than the candle size in seconds. As this will result in unnecessary requests to the exchanges API.
Performance implications when using lookback range
If used in first position in combination with lookback, the computation of the range-based percent change can be time and resource consuming, as it downloads candles for all tradable pairs. Hence it's highly advised to use the standard approach with PercentChangePairList to narrow the pairlist down for further percent-change calculation.
Backtesting
PercentChangePairList does not support backtesting mode.
With ProducerPairList, you can reuse the pairlist from a Producer without explicitly defining the pairlist on each consumer.
Consumer mode is required for this pairlist to work.
The pairlist will perform a check on active pairs against the current exchange configuration to avoid attempting to trade on invalid markets.
You can limit the length of the pairlist with the optional parameter number_assets. Using \"number_assets\"=0 or omitting this key will result in the reuse of all producer pairs valid for the current setup.
\"pairlists\": [\n {\n \"method\": \"ProducerPairList\",\n \"number_assets\": 5,\n \"producer_name\": \"default\",\n }\n],\nCombining pairlists
This pairlist can be combined with all other pairlists and filters for further pairlist reduction, and can also act as an \"additional\" pairlist, on top of already defined pairs. ProducerPairList can also be used multiple times in sequence, combining the pairs from multiple producers. Obviously in complex such configurations, the Producer may not provide data for all pairs, so the strategy must be fit for this.
It allows the user to fetch a pairlist from a remote server or a locally stored json file within the freqtrade directory, enabling dynamic updates and customization of the trading pairlist.
The RemotePairList is defined in the pairlists section of the configuration settings. It uses the following configuration options:
\"pairlists\": [\n {\n \"method\": \"RemotePairList\",\n \"mode\": \"whitelist\",\n \"processing_mode\": \"filter\",\n \"pairlist_url\": \"https://example.com/pairlist\",\n \"number_assets\": 10,\n \"refresh_period\": 1800,\n \"keep_pairlist_on_failure\": true,\n \"read_timeout\": 60,\n \"bearer_token\": \"my-bearer-token\",\n \"save_to_file\": \"user_data/filename.json\" \n }\n]\nThe optional mode option specifies if the pairlist should be used as a blacklist or as a whitelist. The default value is \"whitelist\".
The optional processing_mode option in the RemotePairList configuration determines how the retrieved pairlist is processed. It can have two values: \"filter\" or \"append\". The default value is \"filter\".
In \"filter\" mode, the retrieved pairlist is used as a filter. Only the pairs present in both the original pairlist and the retrieved pairlist are included in the final pairlist. Other pairs are filtered out.
In \"append\" mode, the retrieved pairlist is added to the original pairlist. All pairs from both lists are included in the final pairlist without any filtering.
The pairlist_url option specifies the URL of the remote server where the pairlist is located, or the path to a local file (if file:/// is prepended). This allows the user to use either a remote server or a local file as the source for the pairlist.
The save_to_file option, when provided with a valid filename, saves the processed pairlist to that file in JSON format. This option is optional, and by default, the pairlist is not saved to a file.
save_to_file can be used to save the pairlist to a file with Bot1:
\"pairlists\": [\n {\n \"method\": \"RemotePairList\",\n \"mode\": \"whitelist\",\n \"pairlist_url\": \"https://example.com/pairlist\",\n \"number_assets\": 10,\n \"refresh_period\": 1800,\n \"keep_pairlist_on_failure\": true,\n \"read_timeout\": 60,\n \"save_to_file\": \"user_data/filename.json\" \n }\n]\nThis saved pairlist file can be loaded by Bot2, or any additional bot with this configuration:
\"pairlists\": [\n {\n \"method\": \"RemotePairList\",\n \"mode\": \"whitelist\",\n \"pairlist_url\": \"file:///user_data/filename.json\",\n \"number_assets\": 10,\n \"refresh_period\": 10,\n \"keep_pairlist_on_failure\": true,\n }\n]\nThe user is responsible for providing a server or local file that returns a JSON object with the following structure:
{\n \"pairs\": [\"XRP/USDT\", \"ETH/USDT\", \"LTC/USDT\"],\n \"refresh_period\": 1800\n}\nThe pairs property should contain a list of strings with the trading pairs to be used by the bot. The refresh_period property is optional and specifies the number of seconds that the pairlist should be cached before being refreshed.
The optional keep_pairlist_on_failure specifies whether the previous received pairlist should be used if the remote server is not reachable or returns an error. The default value is true.
The optional read_timeout specifies the maximum amount of time (in seconds) to wait for a response from the remote source, The default value is 60.
The optional bearer_token will be included in the requests Authorization Header.
Note
In case of a server error the last received pairlist will be kept if keep_pairlist_on_failure is set to true, when set to false a empty pairlist is returned.
MarketCapPairList employs sorting/filtering of pairs by their marketcap rank based of CoinGecko. The returned pairlist will be sorted based of their marketcap ranks.
\"pairlists\": [\n {\n \"method\": \"MarketCapPairList\",\n \"number_assets\": 20,\n \"max_rank\": 50,\n \"refresh_period\": 86400,\n \"categories\": [\"layer-1\"]\n }\n]\nnumber_assets defines the maximum number of pairs returned by the pairlist. max_rank will determine the maximum rank used in creating/filtering the pairlist. It's expected that some coins within the top max_rank marketcap will not be included in the resulting pairlist since not all pairs will have active trading pairs in your preferred market/stake/exchange combination. While using a max_rank bigger than 250 is supported, it's not recommended, as it'll cause multiple API calls to CoinGecko, which can lead to rate limit issues.
The refresh_period setting defines the interval (in seconds) at which the marketcap rank data will be refreshed. The default is 86,400 seconds (1 day). The pairlist cache (refresh_period) applies to both generating pairlists (when in the first position in the list) and filtering instances (when not in the first position in the list).
The categories setting specifies the coingecko categories from which to select coins from. The default is an empty list [], meaning no category filtering is applied. If an incorrect category string is chosen, the plugin will print the available categories from CoinGecko and fail. The category should be the ID of the category, for example, for https://www.coingecko.com/en/categories/layer-1, the category ID would be layer-1. You can pass multiple categories such as [\"layer-1\", \"meme-token\"] to select from several categories.
Coins like 1000PEPE/USDT or KPEPE/USDT:USDT are detected on a best effort basis, with the prefixes 1000 and K being used to identify them.
Many categories
Each added category corresponds to one API call to CoinGecko. The more categories you add, the longer the pairlist generation will take, potentially causing rate limit issues.
Duplicate symbols in coingecko
Coingecko often has duplicate symbols, where the same symbol is used for different coins. Freqtrade will use the symbol as is and try to search for it on the exchange. If the symbol exists - it will be used. Freqtrade will however not check if the intended symbol is the one coingecko meant. This can sometimes lead to unexpected results, especially on low volume coins or with meme coin categories.
"},{"location":"plugins/#agefilter","title":"AgeFilter","text":"Removes pairs that have been listed on the exchange for less than min_days_listed days (defaults to 10) or more than max_days_listed days (defaults None mean infinity).
When pairs are first listed on an exchange they can suffer huge price drops and volatility in the first few days while the pair goes through its price-discovery period. Bots can often be caught out buying before the pair has finished dropping in price.
This filter allows freqtrade to ignore pairs until they have been listed for at least min_days_listed days and listed before max_days_listed.
Removes pairs that will be delisted on the exchange maximum max_days_from_now days from now (defaults to 0 which remove all future delisted pairs no matter how far from now). Currently this filter only supports following exchanges:
Available exchanges
Delist filter is only available on Binance, where Binance Futures will work for both dry and live modes, while Binance Spot is limited to live mode (for technical reasons).
Backtesting
DelistFilter does not support backtesting mode.
Shrink whitelist to consist only in-trade pairs when the trade slots are full (when max_open_trades isn't being set to -1 in the config).
When the trade slots are full, there is no need to calculate indicators of the rest of the pairs (except informative pairs) since no new trade can be opened. By shrinking the whitelist to just the in-trade pairs, you can improve calculation speeds and reduce CPU usage. When a trade slot is free (either a trade is closed or max_open_trades value in config is increased), then the whitelist will return to normal state.
When multiple pairlist filters are being used, it's recommended to put this filter at second position directly below the primary pairlist, so when the trade slots are full, the bot doesn't have to download data for the rest of the filters.
Backtesting
FullTradesFilter does not support backtesting mode.
Offsets an incoming pairlist by a given offset value.
As an example it can be used in conjunction with VolumeFilter to remove the top X volume pairs. Or to split a larger pairlist on two bot instances.
Example to remove the first 10 pairs from the pairlist, and takes the next 20 (taking items 10-30 of the initial list):
\"pairlists\": [\n // ...\n {\n \"method\": \"OffsetFilter\",\n \"offset\": 10,\n \"number_assets\": 20\n }\n],\nWarning
When OffsetFilter is used to split a larger pairlist among multiple bots in combination with VolumeFilter it can not be guaranteed that pairs won't overlap due to slightly different refresh intervals for the VolumeFilter.
Note
An offset larger than the total length of the incoming pairlist will result in an empty pairlist.
"},{"location":"plugins/#performancefilter","title":"PerformanceFilter","text":"Sorts pairs by past trade performance, as follows:
Trade count is used as a tie breaker.
You can use the minutes parameter to only consider performance of the past X minutes (rolling window). Not defining this parameter (or setting it to 0) will use all-time performance.
The optional min_profit (as ratio -> a setting of 0.01 corresponds to 1%) parameter defines the minimum profit a pair must have to be considered. Pairs below this level will be filtered out. Using this parameter without minutes is highly discouraged, as it can lead to an empty pairlist without a way to recover.
\"pairlists\": [\n // ...\n {\n \"method\": \"PerformanceFilter\",\n \"minutes\": 1440, // rolling 24h\n \"min_profit\": 0.01 // minimal profit 1%\n }\n],\nAs this Filter uses past performance of the bot, it'll have some startup-period - and should only be used after the bot has a few 100 trades in the database.
Backtesting
PerformanceFilter does not support backtesting mode.
Filters low-value coins which would not allow setting stoplosses.
Namely, pairs are blacklisted if a variance of one percent or more in the stop price would be caused by precision rounding on the exchange, i.e. rounded(stop_price) <= rounded(stop_price * 0.99). The idea is to avoid coins with a value VERY close to their lower trading boundary, not allowing setting of proper stoploss.
PrecisionFilter is pointless for futures trading
The above does not apply to shorts. And for longs, in theory the trade will be liquidated first.
Backtesting
PrecisionFilter does not support backtesting mode using multiple strategies.
The PriceFilter allows filtering of pairs by price. Currently the following price filters are supported:
min_pricemax_pricemax_valuelow_price_ratioThe min_price setting removes pairs where the price is below the specified price. This is useful if you wish to avoid trading very low-priced pairs. This option is disabled by default, and will only apply if set to > 0.
The max_price setting removes pairs where the price is above the specified price. This is useful if you wish to trade only low-priced pairs. This option is disabled by default, and will only apply if set to > 0.
The max_value setting removes pairs where the minimum value change is above a specified value. This is useful when an exchange has unbalanced limits. For example, if step-size = 1 (so you can only buy 1, or 2, or 3, but not 1.1 Coins) - and the price is pretty high (like 20$) as the coin has risen sharply since the last limit adaption. As a result of the above, you can only buy for 20$, or 40$ - but not for 25$. On exchanges that deduct fees from the receiving currency (e.g. binance) - this can result in high value coins / amounts that are unsellable as the amount is slightly below the limit.
The low_price_ratio setting removes pairs where a raise of 1 price unit (pip) is above the low_price_ratio ratio. This option is disabled by default, and will only apply if set to > 0.
For PriceFilter at least one of its min_price, max_price or low_price_ratio settings must be applied.
Calculation example:
Min price precision for SHITCOIN/BTC is 8 decimals. If its price is 0.00000011 - one price step above would be 0.00000012, which is ~9% higher than the previous price value. You may filter out this pair by using PriceFilter with low_price_ratio set to 0.09 (9%) or with min_price set to 0.00000011, correspondingly.
Low priced pairs
Low priced pairs with high \"1 pip movements\" are dangerous since they are often illiquid and it may also be impossible to place the desired stoploss, which can often result in high losses since price needs to be rounded to the next tradable price - so instead of having a stoploss of -5%, you could end up with a stoploss of -9% simply due to price rounding.
"},{"location":"plugins/#shufflefilter","title":"ShuffleFilter","text":"Shuffles (randomizes) pairs in the pairlist. It can be used for preventing the bot from trading some of the pairs more frequently then others when you want all pairs be treated with the same priority.
By default, ShuffleFilter will shuffle pairs once per candle. To shuffle on every iteration, set \"shuffle_frequency\" to \"iteration\" instead of the default of \"candle\".
{\n \"method\": \"ShuffleFilter\", \n \"shuffle_frequency\": \"candle\",\n \"seed\": 42\n }\nTip
You may set the seed value for this Pairlist to obtain reproducible results, which can be useful for repeated backtesting sessions. If seed is not set, the pairs are shuffled in the non-repeatable random order. ShuffleFilter will automatically detect runmodes and apply the seed only for backtesting modes - if a seed value is set.
Removes pairs that have a difference between asks and bids above the specified ratio, max_spread_ratio (defaults to 0.005).
Example:
If DOGE/BTC maximum bid is 0.00000026 and minimum ask is 0.00000027, the ratio is calculated as: 1 - bid/ask ~= 0.037 which is > 0.005 and this pair will be filtered out.
Removes pairs where the difference between lowest low and highest high over lookback_days days is below min_rate_of_change or above max_rate_of_change. Since this is a filter that requires additional data, the results are cached for refresh_period.
In the below example: If the trading range over the last 10 days is <1% or >99%, remove the pair from the whitelist.
\"pairlists\": [\n {\n \"method\": \"RangeStabilityFilter\",\n \"lookback_days\": 10,\n \"min_rate_of_change\": 0.01,\n \"max_rate_of_change\": 0.99,\n \"refresh_period\": 86400\n }\n]\nAdding \"sort_direction\": \"asc\" or \"sort_direction\": \"desc\" enables sorting for this pairlist.
Tip
This Filter can be used to automatically remove stable coin pairs, which have a very low trading range, and are therefore extremely difficult to trade with profit. Additionally, it can also be used to automatically remove pairs with extreme high/low variance over a given amount of time.
"},{"location":"plugins/#volatilityfilter","title":"VolatilityFilter","text":"Volatility is the degree of historical variation of a pairs over time, it is measured by the standard deviation of logarithmic daily returns. Returns are assumed to be normally distributed, although actual distribution might be different. In a normal distribution, 68% of observations fall within one standard deviation and 95% of observations fall within two standard deviations. Assuming a volatility of 0.05 means that the expected returns for 20 out of 30 days is expected to be less than 5% (one standard deviation). Volatility is a positive ratio of the expected deviation of return and can be greater than 1.00. Please refer to the wikipedia definition of volatility.
This filter removes pairs if the average volatility over a lookback_days days is below min_volatility or above max_volatility. Since this is a filter that requires additional data, the results are cached for refresh_period.
This filter can be used to narrow down your pairs to a certain volatility or avoid very volatile pairs.
In the below example: If the volatility over the last 10 days is not in the range of 0.05-0.50, remove the pair from the whitelist. The filter is applied every 24h.
\"pairlists\": [\n {\n \"method\": \"VolatilityFilter\",\n \"lookback_days\": 10,\n \"min_volatility\": 0.05,\n \"max_volatility\": 0.50,\n \"refresh_period\": 86400\n }\n]\nAdding \"sort_direction\": \"asc\" or \"sort_direction\": \"desc\" enables sorting mode for this pairlist.
The below example blacklists BNB/BTC, uses VolumePairList with 20 assets, sorting pairs by quoteVolume, then filter future delisted pairs using DelistFilter and AgeFilter to remove pairs that are listed less than 10 days ago. After that PrecisionFilter and PriceFilter are applied, filtering all assets where 1 price unit is > 1%. Then the SpreadFilter and VolatilityFilter are applied and pairs are finally shuffled with the random seed set to some predefined value.
\"exchange\": {\n \"pair_whitelist\": [],\n \"pair_blacklist\": [\"BNB/BTC\"]\n},\n\"pairlists\": [\n {\n \"method\": \"VolumePairList\",\n \"number_assets\": 20,\n \"sort_key\": \"quoteVolume\"\n },\n {\n \"method\": \"DelistFilter\",\n \"max_days_from_now\": 0,\n },\n {\"method\": \"AgeFilter\", \"min_days_listed\": 10},\n {\"method\": \"PrecisionFilter\"},\n {\"method\": \"PriceFilter\", \"low_price_ratio\": 0.01},\n {\"method\": \"SpreadFilter\", \"max_spread_ratio\": 0.005},\n {\n \"method\": \"RangeStabilityFilter\",\n \"lookback_days\": 10,\n \"min_rate_of_change\": 0.01,\n \"refresh_period\": 86400\n },\n {\n \"method\": \"VolatilityFilter\",\n \"lookback_days\": 10,\n \"min_volatility\": 0.05,\n \"max_volatility\": 0.50,\n \"refresh_period\": 86400\n },\n {\"method\": \"ShuffleFilter\", \"seed\": 42}\n],\nProtections will protect your strategy from unexpected events and market conditions by temporarily stop trading for either one pair, or for all pairs. All protection end times are rounded up to the next candle to avoid sudden, unexpected intra-candle buys.
Usage tips
Not all Protections will work for all strategies, and parameters will need to be tuned for your strategy to improve performance.
Each Protection can be configured multiple times with different parameters, to allow different levels of protection (short-term / long-term).
Backtesting
Protections are supported by backtesting and hyperopt, but must be explicitly enabled by using the --enable-protections flag.
StoplossGuard Stop trading if a certain amount of stoploss occurred within a certain time window.MaxDrawdown Stop trading if max-drawdown is reached.LowProfitPairs Lock pairs with low profitsCooldownPeriod Don't enter a trade right after selling a trade.method Protection name to use. Datatype: String, selected from available Protections stop_duration_candles For how many candles should the lock be set? Datatype: Positive integer (in candles) stop_duration how many minutes should protections be locked. Cannot be used together with stop_duration_candles. Datatype: Float (in minutes) lookback_period_candles Only trades that completed within the last lookback_period_candles candles will be considered. This setting may be ignored by some Protections. Datatype: Positive integer (in candles). lookback_period Only trades that completed after current_time - lookback_period will be considered. Cannot be used together with lookback_period_candles. This setting may be ignored by some Protections. Datatype: Float (in minutes) trade_limit Number of trades required at minimum (not used by all Protections). Datatype: Positive integer unlock_at Time when trading will be unlocked regularly (not used by all Protections). Datatype: string Input Format: \"HH:MM\" (24-hours) Durations
Durations (stop_duration* and lookback_period* can be defined in either minutes or candles). For more flexibility when testing different timeframes, all below examples will use the \"candle\" definition.
StoplossGuard selects all trades within lookback_period in minutes (or in candles when using lookback_period_candles). If trade_limit or more trades resulted in stoploss, trading will stop for stop_duration in minutes (or in candles when using stop_duration_candles, or until the set time when using unlock_at).
This applies across all pairs, unless only_per_pair is set to true, which will then only look at one pair at a time.
Similarly, this protection will by default look at all trades (long and short). For futures bots, setting only_per_side will make the bot only consider one side, and will then only lock this one side, allowing for example shorts to continue after a series of long stoplosses.
required_profit will determine the required relative profit (or loss) for stoplosses to consider. This should normally not be set and defaults to 0.0 - which means all losing stoplosses will be triggering a block.
The below example stops trading for all pairs for 4 candles after the last trade if the bot hit stoploss 4 times within the last 24 candles.
@property\ndef protections(self):\n return [\n {\n \"method\": \"StoplossGuard\",\n \"lookback_period_candles\": 24,\n \"trade_limit\": 4,\n \"stop_duration_candles\": 4,\n \"required_profit\": 0.0,\n \"only_per_pair\": False,\n \"only_per_side\": False\n }\n ]\nNote
StoplossGuard considers all trades with the results \"stop_loss\", \"stoploss_on_exchange\" and \"trailing_stop_loss\" if the resulting profit was negative. trade_limit and lookback_period will need to be tuned for your strategy.
MaxDrawdown uses all trades within lookback_period in minutes (or in candles when using lookback_period_candles) to determine the maximum drawdown. If the drawdown is below max_allowed_drawdown, trading will stop for stop_duration in minutes (or in candles when using stop_duration_candles) after the last trade - assuming that the bot needs some time to let markets recover.
The below sample stops trading for 12 candles if max-drawdown is > 20% considering all pairs - with a minimum of trade_limit trades - within the last 48 candles. If desired, lookback_period and/or stop_duration can be used.
@property\ndef protections(self):\n return [\n {\n \"method\": \"MaxDrawdown\",\n \"lookback_period_candles\": 48,\n \"trade_limit\": 20,\n \"stop_duration_candles\": 12,\n \"max_allowed_drawdown\": 0.2\n },\n ]\nLowProfitPairs uses all trades for a pair within lookback_period in minutes (or in candles when using lookback_period_candles) to determine the overall profit ratio. If that ratio is below required_profit, that pair will be locked for stop_duration in minutes (or in candles when using stop_duration_candles, or until the set time when using unlock_at).
For futures bots, setting only_per_side will make the bot only consider one side, and will then only lock this one side, allowing for example shorts to continue after a series of long losses.
The below example will stop trading a pair for 60 minutes if the pair does not have a required profit of 2% (and a minimum of 2 trades) within the last 6 candles.
@property\ndef protections(self):\n return [\n {\n \"method\": \"LowProfitPairs\",\n \"lookback_period_candles\": 6,\n \"trade_limit\": 2,\n \"stop_duration\": 60,\n \"required_profit\": 0.02,\n \"only_per_pair\": False,\n }\n ]\nCooldownPeriod locks a pair for stop_duration in minutes (or in candles when using stop_duration_candles, or until the set time when using unlock_at) after exiting, avoiding a re-entry for this pair for stop_duration minutes.
The below example will stop trading a pair for 2 candles after closing a trade, allowing this pair to \"cool down\".
@property\ndef protections(self):\n return [\n {\n \"method\": \"CooldownPeriod\",\n \"stop_duration_candles\": 2\n }\n ]\nNote
This Protection applies only at pair-level, and will never lock all pairs globally. This Protection does not consider lookback_period as it only looks at the latest trade.
All protections can be combined at will, also with different parameters, creating a increasing wall for under-performing pairs. All protections are evaluated in the sequence they are defined.
The below example assumes a timeframe of 1 hour:
CooldownPeriod), giving other pairs a chance to get filled.4 * 1h candles) if the last 2 days (48 * 1h candles) had 20 trades, which caused a max-drawdown of more than 20%. (MaxDrawdown).24 * 1h candles) limit (StoplossGuard).6 * 1h candles) with a combined profit ratio of below 0.02 (<2%) (LowProfitPairs).24 * 1h candles), a minimum of 4 trades.from freqtrade.strategy import IStrategy\n\nclass AwesomeStrategy(IStrategy)\n timeframe = '1h'\n\n @property\n def protections(self):\n return [\n {\n \"method\": \"CooldownPeriod\",\n \"stop_duration_candles\": 5\n },\n {\n \"method\": \"MaxDrawdown\",\n \"lookback_period_candles\": 48,\n \"trade_limit\": 20,\n \"stop_duration_candles\": 4,\n \"max_allowed_drawdown\": 0.2\n },\n {\n \"method\": \"StoplossGuard\",\n \"lookback_period_candles\": 24,\n \"trade_limit\": 4,\n \"stop_duration_candles\": 2,\n \"only_per_pair\": False\n },\n {\n \"method\": \"LowProfitPairs\",\n \"lookback_period_candles\": 6,\n \"trade_limit\": 2,\n \"stop_duration_candles\": 60,\n \"required_profit\": 0.02\n },\n {\n \"method\": \"LowProfitPairs\",\n \"lookback_period_candles\": 24,\n \"trade_limit\": 4,\n \"stop_duration_candles\": 2,\n \"required_profit\": 0.01\n }\n ]\n # ...\nfreqtrade provides a mechanism whereby an instance (also called consumer) may listen to messages from an upstream freqtrade instance (also called producer) using the message websocket. Mainly, analyzed_df and whitelist messages. This allows the reuse of computed indicators (and signals) for pairs in multiple bots without needing to compute them multiple times.
See Message Websocket in the Rest API docs for setting up the api_server configuration for your message websocket (this will be your producer).
Note
We strongly recommend to set ws_token to something random and known only to yourself to avoid unauthorized access to your bot.
Enable subscribing to an instance by adding the external_message_consumer section to the consumer's config file.
{\n //...\n \"external_message_consumer\": {\n \"enabled\": true,\n \"producers\": [\n {\n \"name\": \"default\", // This can be any name you'd like, default is \"default\"\n \"host\": \"127.0.0.1\", // The host from your producer's api_server config\n \"port\": 8080, // The port from your producer's api_server config\n \"secure\": false, // Use a secure websockets connection, default false\n \"ws_token\": \"sercet_Ws_t0ken\" // The ws_token from your producer's api_server config\n }\n ],\n // The following configurations are optional, and usually not required\n // \"wait_timeout\": 300,\n // \"ping_timeout\": 10,\n // \"sleep_time\": 10,\n // \"remove_entry_exit_signals\": false,\n // \"message_size_limit\": 8\n }\n //...\n}\nenabled Required. Enable consumer mode. If set to false, all other settings in this section are ignored.Defaults to false. Datatype: boolean . producers Required. List of producers Datatype: Array. producers.name Required. Name of this producer. This name must be used in calls to get_producer_pairs() and get_producer_df() if more than one producer is used. Datatype: string producers.host Required. The hostname or IP address from your producer. Datatype: string producers.port Required. The port matching the above host.Defaults to 8080. Datatype: Integer producers.secure Optional. Use ssl in websockets connection. Default False. Datatype: string producers.ws_token Required. ws_token as configured on the producer. Datatype: string Optional settings wait_timeout Timeout until we ping again if no message is received. Defaults to 300. Datatype: Integer - in seconds. ping_timeout Ping timeout Defaults to 10. Datatype: Integer - in seconds. sleep_time Sleep time before retrying to connect.Defaults to 10. Datatype: Integer - in seconds. remove_entry_exit_signals Remove signal columns from the dataframe (set them to 0) on dataframe receipt.Defaults to false. Datatype: Boolean. initial_candle_limit Initial candles to expect from the Producer.Defaults to 1500. Datatype: Integer - Number of candles. message_size_limit Size limit per messageDefaults to 8. Datatype: Integer - Megabytes. Instead of (or as well as) calculating indicators in populate_indicators() the follower instance listens on the connection to a producer instance's messages (or multiple producer instances in advanced configurations) and requests the producer's most recently analyzed dataframes for each pair in the active whitelist.
A consumer instance will then have a full copy of the analyzed dataframes without the need to calculate them itself.
"},{"location":"producer-consumer/#examples","title":"Examples","text":""},{"location":"producer-consumer/#example-producer-strategy","title":"Example - Producer Strategy","text":"A simple strategy with multiple indicators. No special considerations are required in the strategy itself.
class ProducerStrategy(IStrategy):\n #...\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Calculate indicators in the standard freqtrade way which can then be broadcast to other instances\n \"\"\"\n dataframe['rsi'] = ta.RSI(dataframe)\n bollinger = qtpylib.bollinger_bands(qtpylib.typical_price(dataframe), window=20, stds=2)\n dataframe['bb_lowerband'] = bollinger['lower']\n dataframe['bb_middleband'] = bollinger['mid']\n dataframe['bb_upperband'] = bollinger['upper']\n dataframe['tema'] = ta.TEMA(dataframe, timeperiod=9)\n\n return dataframe\n\n def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Populates the entry signal for the given dataframe\n \"\"\"\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], self.buy_rsi.value)) &\n (dataframe['tema'] <= dataframe['bb_middleband']) &\n (dataframe['tema'] > dataframe['tema'].shift(1)) &\n (dataframe['volume'] > 0)\n ),\n 'enter_long'] = 1\n\n return dataframe\nFreqAI
You can use this to setup FreqAI on a powerful machine, while you run consumers on simple machines like raspberries, which can interpret the signals generated from the producer in different ways.
"},{"location":"producer-consumer/#example-consumer-strategy","title":"Example - Consumer Strategy","text":"A logically equivalent strategy which calculates no indicators itself, but will have the same analyzed dataframes available to make trading decisions based on the indicators calculated in the producer. In this example the consumer has the same entry criteria, however this is not necessary. The consumer may use different logic to enter/exit trades, and only use the indicators as specified.
class ConsumerStrategy(IStrategy):\n #...\n process_only_new_candles = False # required for consumers\n\n _columns_to_expect = ['rsi_default', 'tema_default', 'bb_middleband_default']\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Use the websocket api to get pre-populated indicators from another freqtrade instance.\n Use `self.dp.get_producer_df(pair)` to get the dataframe\n \"\"\"\n pair = metadata['pair']\n timeframe = self.timeframe\n\n producer_pairs = self.dp.get_producer_pairs()\n # You can specify which producer to get pairs from via:\n # self.dp.get_producer_pairs(\"my_other_producer\")\n\n # This func returns the analyzed dataframe, and when it was analyzed\n producer_dataframe, _ = self.dp.get_producer_df(pair)\n # You can get other data if the producer makes it available:\n # self.dp.get_producer_df(\n # pair,\n # timeframe=\"1h\",\n # candle_type=CandleType.SPOT,\n # producer_name=\"my_other_producer\"\n # )\n\n if not producer_dataframe.empty:\n # If you plan on passing the producer's entry/exit signal directly,\n # specify ffill=False or it will have unintended results\n merged_dataframe = merge_informative_pair(dataframe, producer_dataframe,\n timeframe, timeframe,\n append_timeframe=False,\n suffix=\"default\")\n return merged_dataframe\n else:\n dataframe[self._columns_to_expect] = 0\n\n return dataframe\n\n def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Populates the entry signal for the given dataframe\n \"\"\"\n # Use the dataframe columns as if we calculated them ourselves\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi_default'], self.buy_rsi.value)) &\n (dataframe['tema_default'] <= dataframe['bb_middleband_default']) &\n (dataframe['tema_default'] > dataframe['tema_default'].shift(1)) &\n (dataframe['volume'] > 0)\n ),\n 'enter_long'] = 1\n\n return dataframe\nUsing upstream signals
By setting remove_entry_exit_signals=false, you can also use the producer's signals directly. They should be available as enter_long_default (assuming suffix=\"default\" was used) - and can be used as either signal directly, or as additional indicator.
This page explains how to validate your strategy for inaccuracies due to recursive issues with certain indicators.
A recursive formula defines any term of a sequence relative to its preceding term(s). An example of a recursive formula is an = an-1 + b.
Why does this matter for Freqtrade? In backtesting, the bot will get full data of the pairs according to the timerange specified. But in a dry/live run, the bot will be limited by the amount of data each exchanges gives.
For example, to calculate a very basic indicator called steps, the first row's value is always 0, while the following rows' values are equal to the value of the previous row plus 1. If I were to calculate it using the latest 1000 candles, then the steps value of the first row is 0, and the steps value at the last closed candle is 999.
What happens if the calculation is using only the latest 500 candles? Then instead of 999, the steps value at last closed candle is 499. The difference of the value means your backtest result can differ from your dry/live run result.
The recursive-analysis command requires historic data to be available. To learn how to get data for the pairs and exchange you're interested in, head over to the Data Downloading section of the documentation.
This command is built upon preparing different lengths of data and calculates indicators based on them. This does not backtest the strategy itself, but rather only calculates the indicators. After calculating the indicators of different startup candle values (startup_candle_count) are done, the values of last rows across all specified startup_candle_count are compared to see how much variance they show compared to the base calculation.
Command settings:
-p option to set your desired pair to analyze. Since we are only looking at indicator values, using more than one pair is redundant. Preferably use a pair with a relatively high price and at least moderate volatility, such as BTC or ETH, to avoid rounding issues that can make the results inaccurate. If no pair is set on the command, the pair used for this analysis is the first pair in the whitelist.--cache is forced to \"none\" to avoid loading previous indicators calculation automatically.In addition to the recursive formula check, this command also carries out a simple lookahead bias check on the indicator values only. For a full lookahead check, use Lookahead-analysis.
"},{"location":"recursive-analysis/#recursive-analysis-command-reference","title":"Recursive-analysis command reference","text":"usage: freqtrade recursive-analysis [-h] [-v] [--no-color] [--logfile FILE]\n [-V] [-c PATH] [-d PATH] [--userdir PATH]\n [-s NAME] [--strategy-path PATH]\n [--recursive-strategy-search]\n [--freqaimodel NAME]\n [--freqaimodel-path PATH] [-i TIMEFRAME]\n [--timerange TIMERANGE]\n [--data-format-ohlcv {json,jsongz,feather,parquet}]\n [-p PAIRS [PAIRS ...]]\n [--startup-candle STARTUP_CANDLE [STARTUP_CANDLE ...]]\n\noptions:\n -h, --help show this help message and exit\n -i TIMEFRAME, --timeframe TIMEFRAME\n Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).\n --timerange TIMERANGE\n Specify what timerange of data to use.\n --data-format-ohlcv {json,jsongz,feather,parquet}\n Storage format for downloaded candle (OHLCV) data.\n (default: `feather`).\n -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]\n Limit command to these pairs. Pairs are space-\n separated.\n --startup-candle STARTUP_CANDLE [STARTUP_CANDLE ...]\n Specify startup candles to be checked (`199`, `499`,\n `999`, `1999`).\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n\nStrategy arguments:\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n --freqaimodel NAME Specify a custom freqaimodels.\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\nThe default value for startup candles are odd numbers. When the bot fetches candle data from the exchange's API, the last candle is the one being checked by the bot and the rest of the data are the \"startup candles\".
For example, Binance allows 1000 candles per API call. When the bot receives 1000 candles, the last candle is the \"current candle\", and the preceding 999 candles are the \"startup candles\". By setting the startup candle count as 1000 instead of 999, the bot will try to fetch 1001 candles instead. The exchange API will then send candle data in a paginated form, i.e. in case of the Binance API, this will be two groups- one of length 1000 and another of length 1. This results in the bot thinking the strategy needs 1001 candles of data, and so it will download 2000 candles worth of data instead, which means there will be 1 \"current candle\" and 1999 \"startup candles\".
Furthermore, exchanges limit the number of consecutive bulk API calls, e.g. Binance allows 5 calls. In this case, only 5000 candles can be downloaded from Binance API without hitting the API rate limit, which means the max startup_candle_count you can have is 4999.
Please note that this candle limit may be changed in the future by the exchanges without any prior notice.
"},{"location":"recursive-analysis/#how-does-the-command-work","title":"How does the command work?","text":"This is an example of an output results table where at least one indicator has a recursive formula issue:
| indicators | 20 | 40 | 80 | 100 | 150 | 300 | 999 |\n|--------------+---------+---------+--------+--------+---------+---------+--------|\n| rsi_30 | nan% | -6.025% | 0.612% | 0.828% | -0.140% | 0.000% | 0.000% |\n| rsi_14 | 24.141% | -0.876% | 0.070% | 0.007% | -0.000% | -0.000% | - |\nThe column headers indicate the different startup_candle_count used in the analysis. The values in the table indicate the variance of the calculated indicators compared to the benchmark value.
nan% means the value of that indicator cannot be calculated due to lack of data. In this example, you cannot calculate RSI with length 30 with just 21 candles (1 current candle + 20 startup candles).
Users should assess the table per indicator to decide if the specified startup_candle_count results in a sufficiently small variance so that the indicator does not have any effect on entries and/or exits.
As such, aiming for absolute zero variance (shown by - value) might not be the best option, because some indicators might require you to use such a long startup_candle_count to have zero variance.
recursive-analysis will only calculate and compare the indicator values at the last row. The output table reports the percentage differences between the different startup candle count calculations and the original benchmark calculation. Whether it has any actual impact on your entries and exits is not included.startup_candle_count high enough) that the recursion inherent in the indicator will not have any real impact on trading decisions.recursive-analysis will only run calculations on populate_indicators and @informative decorator(s). If you put any indicator calculation on populate_entry_trend or populate_exit_trend, it won't be calculated.FreqUI now has it's own dedicated documentation section - please refer to that section for all information regarding the FreqUI.
"},{"location":"rest-api/#configuration","title":"Configuration","text":"Enable the rest API by adding the api_server section to your configuration and setting api_server.enabled to true.
Sample configuration:
\"api_server\": {\n \"enabled\": true,\n \"listen_ip_address\": \"127.0.0.1\",\n \"listen_port\": 8080,\n \"verbosity\": \"error\",\n \"enable_openapi\": false,\n \"jwt_secret_key\": \"somethingrandom\",\n \"CORS_origins\": [],\n \"username\": \"Freqtrader\",\n \"password\": \"SuperSecret1!\",\n \"ws_token\": \"sercet_Ws_t0ken\"\n },\nSecurity warning
By default, the configuration listens on localhost only (so it's not reachable from other systems). We strongly recommend to not expose this API to the internet and choose a strong, unique password, since others will potentially be able to control your bot.
API/UI Access on a remote serversIf you're running on a VPS, you should consider using either a ssh tunnel, or setup a VPN (openVPN, wireguard) to connect to your bot. This will ensure that freqUI is not directly exposed to the internet, which is not recommended for security reasons (freqUI does not support https out of the box). Setup of these tools is not part of this tutorial, however many good tutorials can be found on the internet.
You can then access the API by going to http://127.0.0.1:8080/api/v1/ping in a browser to check if the API is running correctly. This should return the response:
{\"status\":\"pong\"}\nAll other endpoints return sensitive info and require authentication and are therefore not available through a web browser.
"},{"location":"rest-api/#security","title":"Security","text":"To generate a secure password, best use a password manager, or use the below code.
import secrets\nsecrets.token_hex()\nJWT token
Use the same method to also generate a JWT secret key (jwt_secret_key).
Password selection
Please make sure to select a very strong, unique password to protect your bot from unauthorized access. Also change jwt_secret_key to something random (no need to remember this, but it'll be used to encrypt your session, so it better be something unique!).
If you run your bot using docker, you'll need to have the bot listen to incoming connections. The security is then handled by docker.
\"api_server\": {\n \"enabled\": true,\n \"listen_ip_address\": \"0.0.0.0\",\n \"listen_port\": 8080,\n \"username\": \"Freqtrader\",\n \"password\": \"SuperSecret1!\",\n //...\n },\nMake sure that the following 2 lines are available in your docker-compose file:
ports:\n - \"127.0.0.1:8080:8080\"\nSecurity warning
By using \"8080:8080\" (or \"0.0.0.0:8080:8080\") in the docker port mapping, the API will be available to everyone connecting to the server under the correct port, so others may be able to control your bot. This may be safe if you're running the bot in a secure environment (like your home network), but it's not recommended to expose the API to the internet.
We advise consuming the API by using the supported freqtrade-client package (also available as scripts/rest_client.py).
This command can be installed independent of any running freqtrade bot by using pip install freqtrade-client.
This module is designed to be lightweight, and only depends on the requests and python-rapidjson modules, skipping all heavy dependencies freqtrade otherwise needs.
freqtrade-client <command> [optional parameters]\nBy default, the script assumes 127.0.0.1 (localhost) and port 8080 to be used, however you can specify a configuration file to override this behaviour.
{\n \"api_server\": {\n \"enabled\": true,\n \"listen_ip_address\": \"0.0.0.0\",\n \"listen_port\": 8080,\n \"username\": \"Freqtrader\",\n \"password\": \"SuperSecret1!\",\n //...\n }\n}\nfreqtrade-client --config rest_config.json <command> [optional parameters]\nCommands with many arguments may require keyword arguments (for clarity) - which can be provided as follows:
freqtrade-client --config rest_config.json forceenter BTC/USDT long enter_tag=GutFeeling\nThis method will work for all arguments - check the \"show\" command for a list of available parameters.
Programmatic useThe freqtrade-client package (installable independent of freqtrade) can be used in your own scripts to interact with the freqtrade API. to do so, please use the following:
from freqtrade_client import FtRestClient\n\n\nclient = FtRestClient(server_url, username, password)\n\n# Get the status of the bot\nping = client.ping()\nprint(ping)\n\n# Add pairs to blacklist\nclient.blacklist(\"BTC/USDT\", \"ETH/USDT\")\n# Add pairs to blacklist by supplying a list\nclient.blacklist(*listPairs)\n# ... \nFor a full list of available commands, please refer to the list below.
Possible commands can be listed from the rest-client script using the help command.
freqtrade-client help\nPossible commands:\n\navailable_pairs\n Return available pair (backtest data) based on timeframe / stake_currency selection\n\n :param timeframe: Only pairs with this timeframe available.\n :param stake_currency: Only pairs that include this timeframe\n\nbalance\n Get the account balance.\n\nblacklist\n Show the current blacklist.\n\n :param add: List of coins to add (example: \"BNB/BTC\")\n\ncancel_open_order\n Cancel open order for trade.\n\n :param trade_id: Cancels open orders for this trade.\n\ncount\n Return the amount of open trades.\n\ndaily\n Return the profits for each day, and amount of trades.\n\ndelete_lock\n Delete (disable) lock from the database.\n\n :param lock_id: ID for the lock to delete\n\ndelete_trade\n Delete trade from the database.\n Tries to close open orders. Requires manual handling of this asset on the exchange.\n\n :param trade_id: Deletes the trade with this ID from the database.\n\nforcebuy\n Buy an asset.\n\n :param pair: Pair to buy (ETH/BTC)\n :param price: Optional - price to buy\n\nforceenter\n Force entering a trade\n\n :param pair: Pair to buy (ETH/BTC)\n :param side: 'long' or 'short'\n :param price: Optional - price to buy\n\nforceexit\n Force-exit a trade.\n\n :param tradeid: Id of the trade (can be received via status command)\n :param ordertype: Order type to use (must be market or limit)\n :param amount: Amount to sell. Full sell if not given\n\nhealth\n Provides a quick health check of the running bot.\n\nlock_add\n Manually lock a specific pair\n\n :param pair: Pair to lock\n :param until: Lock until this date (format \"2024-03-30 16:00:00Z\")\n :param side: Side to lock (long, short, *)\n :param reason: Reason for the lock \n\nlocks\n Return current locks\n\nlogs\n Show latest logs.\n\n :param limit: Limits log messages to the last <limit> logs. No limit to get the entire log.\n\npair_candles\n Return live dataframe for <pair><timeframe>.\n\n :param pair: Pair to get data for\n :param timeframe: Only pairs with this timeframe available.\n :param limit: Limit result to the last n candles.\n\npair_history\n Return historic, analyzed dataframe\n\n :param pair: Pair to get data for\n :param timeframe: Only pairs with this timeframe available.\n :param strategy: Strategy to analyze and get values for\n :param timerange: Timerange to get data for (same format than --timerange endpoints)\n\nperformance\n Return the performance of the different coins.\n\nping\n simple ping\n\nplot_config\n Return plot configuration if the strategy defines one.\n\nprofit\n Return the profit summary.\n\nreload_config\n Reload configuration.\n\nshow_config\n Returns part of the configuration, relevant for trading operations.\n\nstart\n Start the bot if it's in the stopped state.\n\npause\n Pause the bot if it's in the running state. If triggered on stopped state will handle open positions.\n\nstats\n Return the stats report (durations, sell-reasons).\n\nstatus\n Get the status of open trades.\n\nstop\n Stop the bot. Use `start` to restart.\n\nstopbuy\n Stop buying (but handle sells gracefully). Use `reload_config` to reset.\n\nstrategies\n Lists available strategies\n\nstrategy\n Get strategy details\n\n :param strategy: Strategy class name\n\nsysinfo\n Provides system information (CPU, RAM usage)\n\ntrade\n Return specific trade\n\n :param trade_id: Specify which trade to get.\n\ntrades\n Return trades history, sorted by id\n\n :param limit: Limits trades to the X last trades. Max 500 trades.\n :param offset: Offset by this amount of trades.\n\nlist_open_trades_custom_data\n Return a dict containing open trades custom-datas\n\n :param key: str, optional - Key of the custom-data\n :param limit: Limits trades to X trades.\n :param offset: Offset by this amount of trades.\n\nlist_custom_data\n Return a dict containing custom-datas of a specified trade\n\n :param trade_id: int - ID of the trade\n :param key: str, optional - Key of the custom-data\n\nversion\n Return the version of the bot.\n\nwhitelist\n Show the current whitelist.\nIf you wish to call the REST API manually via another route, e.g. directly via curl, the table below shows the relevant URL endpoints and parameters. All endpoints in the below table need to be prefixed with the base URL of the API, e.g. http://127.0.0.1:8080/api/v1/ - so the command becomes http://127.0.0.1:8080/api/v1/<command>.
/ping GET Simple command testing the API Readiness - requires no authentication. /start POST Starts the trader. /pause POST Pause the trader. Gracefully handle open trades according to their rules. Do not enter new positions. /stop POST Stops the trader. /stopbuy POST Stops the trader from opening new trades. Gracefully closes open trades according to their rules. /reload_config POST Reloads the configuration file. /trades GET List last trades. Limited to 500 trades per call. /trade/<tradeid> GET Get specific trade.Params:- tradeid (int) /trades/<tradeid> DELETE Remove trade from the database. Tries to close open orders. Requires manual handling of this trade on the exchange.Params:- tradeid (int) /trades/<tradeid>/open-order DELETE Cancel open order for this trade.Params:- tradeid (int) /trades/<tradeid>/reload POST Reload a trade from the Exchange. Only works in live, and can potentially help recover a trade that was manually sold on the exchange.Params:- tradeid (int) /show_config GET Shows part of the current configuration with relevant settings to operation. /logs GET Shows last log messages. /status GET Lists all open trades. /count GET Displays number of trades used and available. /entries GET Shows profit statistics for each enter tags for given pair (or all pairs if pair isn't given). Pair is optional.Params:- pair (str) /exits GET Shows profit statistics for each exit reasons for given pair (or all pairs if pair isn't given). Pair is optional.Params:- pair (str) /mix_tags GET Shows profit statistics for each combinations of enter tag + exit reasons for given pair (or all pairs if pair isn't given). Pair is optional.Params:- pair (str) /locks GET Displays currently locked pairs. /locks POST Locks a pair until \"until\". (Until will be rounded up to the nearest timeframe). Side is optional and is either long or short (default is long). Reason is optional.Params:- <pair> (str)- <until> (datetime)- [side] (str)- [reason] (str) /locks/<lockid> DELETE Deletes (disables) the lock by id.Params:- lockid (int) /profit GET Display a summary of your profit/loss from close trades and some stats about your performance. /forceexit POST Instantly exits the given trade (ignoring minimum_roi), using the given order type (\"market\" or \"limit\", uses your config setting if not specified), and the chosen amount (full sell if not specified). If all is supplied as the tradeid, then all currently open trades will be forced to exit.Params:- <tradeid> (int or str)- <ordertype> (str)- [amount] (float) /forceenter POST Instantly enters the given pair. Side is optional and is either long or short (default is long). Rate is optional. (force_entry_enable must be set to True)Params:- <pair> (str)- <side> (str)- [rate] (float) /performance GET Show performance of each finished trade grouped by pair. /balance GET Show account balance per currency. /daily GET Shows profit or loss per day, over the last n days (n defaults to 7).Params:- timescale (int) /weekly GET Shows profit or loss per week, over the last n days (n defaults to 4).Params:- timescale (int) /monthly GET Shows profit or loss per month, over the last n days (n defaults to 3).Params:- timescale (int) /stats GET Display a summary of profit / loss reasons as well as average holding times. /whitelist GET Show the current whitelist. /blacklist GET Show the current blacklist. /blacklist POST Adds the specified pair to the blacklist.Params:- blacklist (str) /blacklist DELETE Deletes the specified list of pairs from the blacklist.Params:- [pair,pair] (list[str]) /pair_candles GET Returns dataframe for a pair / timeframe combination while the bot is running. Alpha /pair_candles POST Returns dataframe for a pair / timeframe combination while the bot is running, filtered by a provided list of columns to return. AlphaParams:- <column_list> (list[str]) /pair_history GET Returns an analyzed dataframe for a given timerange, analyzed by a given strategy. Alpha /pair_history POST Returns an analyzed dataframe for a given timerange, analyzed by a given strategy, filtered by a provided list of columns to return. AlphaParams:- <column_list> (list[str]) /plot_config GET Get plot config from the strategy (or nothing if not configured). Alpha /strategies GET List strategies in strategy directory. Alpha /strategy/<strategy> GET Get specific Strategy content by strategy class name. AlphaParams:- <strategy> (str) /available_pairs GET List available backtest data. Alpha /version GET Show version. /sysinfo GET Show information about the system load. /health GET Show bot health (last bot loop). Alpha status
Endpoints labeled with Alpha status above may change at any time without notice.
"},{"location":"rest-api/#message-websocket","title":"Message WebSocket","text":"The API Server includes a websocket endpoint for subscribing to RPC messages from the freqtrade Bot. This can be used to consume real-time data from your bot, such as entry/exit fill messages, whitelist changes, populated indicators for pairs, and more.
This is also used to setup Producer/Consumer mode in Freqtrade.
Assuming your rest API is set to 127.0.0.1 on port 8080, the endpoint is available at http://localhost:8080/api/v1/message/ws.
To access the websocket endpoint, the ws_token is required as a query parameter in the endpoint URL.
To generate a safe ws_token you can run the following code:
>>> import secrets\n>>> secrets.token_urlsafe(25)\n'hZ-y58LXyX_HZ8O1cJzVyN6ePWrLpNQv4Q'\nYou would then add that token under ws_token in your api_server config. Like so:
\"api_server\": {\n \"enabled\": true,\n \"listen_ip_address\": \"127.0.0.1\",\n \"listen_port\": 8080,\n \"verbosity\": \"error\",\n \"enable_openapi\": false,\n \"jwt_secret_key\": \"somethingrandom\",\n \"CORS_origins\": [],\n \"username\": \"Freqtrader\",\n \"password\": \"SuperSecret1!\",\n \"ws_token\": \"hZ-y58LXyX_HZ8O1cJzVyN6ePWrLpNQv4Q\" // <-----\n},\nYou can now connect to the endpoint at http://localhost:8080/api/v1/message/ws?token=hZ-y58LXyX_HZ8O1cJzVyN6ePWrLpNQv4Q.
Reuse of example tokens
Please do not use the above example token. To make sure you are secure, generate a completely new token.
"},{"location":"rest-api/#using-the-websocket","title":"Using the WebSocket","text":"Once connected to the WebSocket, the bot will broadcast RPC messages to anyone who is subscribed to them. To subscribe to a list of messages, you must send a JSON request through the WebSocket like the one below. The data key must be a list of message type strings.
{\n \"type\": \"subscribe\",\n \"data\": [\"whitelist\", \"analyzed_df\"] // A list of string message types\n}\nFor a list of message types, please refer to the RPCMessageType enum in freqtrade/enums/rpcmessagetype.py
Now anytime those types of RPC messages are sent in the bot, you will receive them through the WebSocket as long as the connection is active. They typically take the same form as the request:
{\n \"type\": \"analyzed_df\",\n \"data\": {\n \"key\": [\"NEO/BTC\", \"5m\", \"spot\"],\n \"df\": {}, // The dataframe\n \"la\": \"2022-09-08 22:14:41.457786+00:00\"\n }\n}\nWhen using Nginx, the following configuration is required for WebSockets to work (Note this configuration is incomplete, it's missing some information and can not be used as is):
Please make sure to replace <freqtrade_listen_ip> (and the subsequent port) with the IP and Port matching your configuration/setup.
http {\n map $http_upgrade $connection_upgrade {\n default upgrade;\n '' close;\n }\n\n #...\n\n server {\n #...\n\n location / {\n proxy_http_version 1.1;\n proxy_pass http://<freqtrade_listen_ip>:8080;\n proxy_set_header Upgrade $http_upgrade;\n proxy_set_header Connection $connection_upgrade;\n proxy_set_header Host $host;\n }\n }\n}\nTo properly configure your reverse proxy (securely), please consult it's documentation for proxying websockets.
SSL certificates
You can use tools like certbot to setup ssl certificates to access your bot's UI through encrypted connection by using any of the above reverse proxies. While this will protect your data in transit, we do not recommend to run the freqtrade API outside of your private network (VPN, SSH tunnel).
"},{"location":"rest-api/#openapi-interface","title":"OpenAPI interface","text":"To enable the builtin openAPI interface (Swagger UI), specify \"enable_openapi\": true in the api_server configuration. This will enable the Swagger UI at the /docs endpoint. By default, that's running at http://localhost:8080/docs - but it'll depend on your settings.
Note
The below should be done in an application (a Freqtrade REST API client, which fetches info via API), and is not intended to be used on a regular basis.
Freqtrade's REST API also offers JWT (JSON Web Tokens). You can login using the following command, and subsequently use the resulting access_token.
> curl -X POST --user Freqtrader http://localhost:8080/api/v1/token/login\n{\"access_token\":\"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpYXQiOjE1ODkxMTk2ODEsIm5iZiI6MTU4OTExOTY4MSwianRpIjoiMmEwYmY0NWUtMjhmOS00YTUzLTlmNzItMmM5ZWVlYThkNzc2IiwiZXhwIjoxNTg5MTIwNTgxLCJpZGVudGl0eSI6eyJ1IjoiRnJlcXRyYWRlciJ9LCJmcmVzaCI6ZmFsc2UsInR5cGUiOiJhY2Nlc3MifQ.qt6MAXYIa-l556OM7arBvYJ0SDI9J8bIk3_glDujF5g\",\"refresh_token\":\"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpYXQiOjE1ODkxMTk2ODEsIm5iZiI6MTU4OTExOTY4MSwianRpIjoiZWQ1ZWI3YjAtYjMwMy00YzAyLTg2N2MtNWViMjIxNWQ2YTMxIiwiZXhwIjoxNTkxNzExNjgxLCJpZGVudGl0eSI6eyJ1IjoiRnJlcXRyYWRlciJ9LCJ0eXBlIjoicmVmcmVzaCJ9.d1AT_jYICyTAjD0fiQAr52rkRqtxCjUGEMwlNuuzgNQ\"}\n\n> access_token=\"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpYXQiOjE1ODkxMTk2ODEsIm5iZiI6MTU4OTExOTY4MSwianRpIjoiMmEwYmY0NWUtMjhmOS00YTUzLTlmNzItMmM5ZWVlYThkNzc2IiwiZXhwIjoxNTg5MTIwNTgxLCJpZGVudGl0eSI6eyJ1IjoiRnJlcXRyYWRlciJ9LCJmcmVzaCI6ZmFsc2UsInR5cGUiOiJhY2Nlc3MifQ.qt6MAXYIa-l556OM7arBvYJ0SDI9J8bIk3_glDujF5g\"\n# Use access_token for authentication\n> curl -X GET --header \"Authorization: Bearer ${access_token}\" http://localhost:8080/api/v1/count\nSince the access token has a short timeout (15 min) - the token/refresh request should be used periodically to get a fresh access token:
> curl -X POST --header \"Authorization: Bearer ${refresh_token}\"http://localhost:8080/api/v1/token/refresh\n{\"access_token\":\"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpYXQiOjE1ODkxMTk5NzQsIm5iZiI6MTU4OTExOTk3NCwianRpIjoiMDBjNTlhMWUtMjBmYS00ZTk0LTliZjAtNWQwNTg2MTdiZDIyIiwiZXhwIjoxNTg5MTIwODc0LCJpZGVudGl0eSI6eyJ1IjoiRnJlcXRyYWRlciJ9LCJmcmVzaCI6ZmFsc2UsInR5cGUiOiJhY2Nlc3MifQ.1seHlII3WprjjclY6DpRhen0rqdF4j6jbvxIhUFaSbs\"}\nThis whole section is only necessary in cross-origin cases (where you multiple bot API's running on localhost:8081, localhost:8082, ...), and want to combine them into one FreqUI instance.
All web-based front-ends are subject to CORS - Cross-Origin Resource Sharing. Since most of the requests to the Freqtrade API must be authenticated, a proper CORS policy is key to avoid security problems. Also, the standard disallows * CORS policies for requests with credentials, so this setting must be set appropriately.
Users can allow access from different origin URL's to the bot API via the CORS_origins configuration setting. It consists of a list of allowed URL's that are allowed to consume resources from the bot's API.
Assuming your application is deployed as https://frequi.freqtrade.io/home/ - this would mean that the following configuration becomes necessary:
{\n //...\n \"jwt_secret_key\": \"somethingrandom\",\n \"CORS_origins\": [\"https://frequi.freqtrade.io\"],\n //...\n}\nIn the following (pretty common) case, FreqUI is accessible on http://localhost:8080/trade (this is what you see in your navbar when navigating to freqUI).
The correct configuration for this case is http://localhost:8080 - the main part of the URL including the port.
{\n //...\n \"jwt_secret_key\": \"somethingrandom\",\n \"CORS_origins\": [\"http://localhost:8080\"],\n //...\n}\ntrailing Slash
The trailing slash is not allowed in the CORS_origins configuration (e.g. \"http://localhots:8080/\"). Such a configuration will not take effect, and the cors errors will remain.
Note
We strongly recommend to also set jwt_secret_key to something random and known only to yourself to avoid unauthorized access to your bot.
This page contains some help if you want to query your sqlite db.
Other Database systems
To use other Database Systems like PostgreSQL or MariaDB, you can use the same queries, but you need to use the respective client for the database system. Click here to learn how to setup a different database system with freqtrade.
Warning
If you are not familiar with SQL, you should be very careful when running queries on your database. Always make sure to have a backup of your database before running any queries.
"},{"location":"sql_cheatsheet/#install-sqlite3","title":"Install sqlite3","text":"Sqlite3 is a terminal based sqlite application. Feel free to use a visual Database editor like SqliteBrowser if you feel more comfortable with that.
"},{"location":"sql_cheatsheet/#ubuntudebian-installation","title":"Ubuntu/Debian installation","text":"sudo apt-get install sqlite3\nThe freqtrade docker image does contain sqlite3, so you can edit the database without having to install anything on the host system.
docker compose exec freqtrade /bin/bash\nsqlite3 <database-file>.sqlite\nsqlite3\n.open <filepath>\n.tables\n.schema <table_name>\nSELECT * FROM trades;\nQueries that write to the database. These queries should usually not be necessary as freqtrade tries to handle all database operations itself - or exposes them via API or telegram commands.
Warning
Please make sure you have a backup of your database before running any of the below queries.
Danger
You should also never run any writing query (update, insert, delete) while a bot is connected to the database. This can and will lead to data corruption - most likely, without the possibility of recovery.
Warning
Manually selling a pair on the exchange will not be detected by the bot and it will try to sell anyway. Whenever possible, /forceexit should be used to accomplish the same thing. It is strongly advised to backup your database file before making any manual changes.
Note
This should not be necessary after /forceexit, as force_exit orders are closed automatically by the bot on the next iteration.
UPDATE trades\nSET is_open=0,\n close_date=<close_date>,\n close_rate=<close_rate>,\n close_profit = close_rate / open_rate - 1,\n close_profit_abs = (amount * <close_rate> * (1 - fee_close) - (amount * (open_rate * (1 - fee_open)))),\n exit_reason=<exit_reason>\nWHERE id=<trade_ID_to_update>;\nUPDATE trades\nSET is_open=0,\n close_date='2020-06-20 03:08:45.103418',\n close_rate=0.19638016,\n close_profit=0.0496,\n close_profit_abs = (amount * 0.19638016 * (1 - fee_close) - (amount * (open_rate * (1 - fee_open)))),\n exit_reason='force_exit' \nWHERE id=31;\nUse RPC Methods to delete trades
Consider using /delete <tradeid> via telegram or rest API. That's the recommended way to deleting trades.
If you'd still like to remove a trade from the database directly, you can use the below query.
Danger
Some systems (Ubuntu) disable foreign keys in their sqlite3 packaging. When using sqlite - please ensure that foreign keys are on by running PRAGMA foreign_keys = ON before the above query.
DELETE FROM trades WHERE id = <tradeid>;\n\nDELETE FROM trades WHERE id = 31;\nWarning
This will remove this trade from the database. Please make sure you got the correct id and NEVER run this query without the where clause.
The stoploss configuration parameter is loss as ratio that should trigger a sale. For example, value -0.10 will cause immediate sell if the profit dips below -10% for a given trade. This parameter is optional. Stoploss calculations do include fees, so a stoploss of -10% is placed exactly 10% below the entry point.
Most of the strategy files already include the optimal stoploss value.
Info
All stoploss properties mentioned in this file can be set in the Strategy, or in the configuration. Configuration values will override the strategy values.
"},{"location":"stoploss/#stop-loss-on-exchangefreqtrade","title":"Stop Loss On-Exchange/Freqtrade","text":"Those stoploss modes can be on exchange or off exchange.
These modes can be configured with these values:
'emergency_exit': 'market',\n 'stoploss_on_exchange': False\n 'stoploss_on_exchange_interval': 60,\n 'stoploss_on_exchange_limit_ratio': 0.99\nStoploss on exchange is only supported for the following exchanges, and not all exchanges support both stop-limit and stop-market. The Order-type will be ignored if only one mode is available.
Supported exchanges and stoploss types Exchange Mode Margin mode Stoploss type Binance spot limit Binance futures isolated, cross market, limit Bingx spot market, limit Bitmart spot \u274c (not supported) Bybit spot \u274c (not supported) Bybit futures isolated market, limit Gate.io spot limit Gate.io futures isolated limit HTX spot limit Hyperliquid spot \u274c (not supported) Hyperliquid futures isolated limit Kraken spot market, limit OKX spot limit OKX futures isolated limit Bitvavo spot \u274c (not supported) Kucoin spot market, limitTight stoploss
Do not set too low/tight stoploss value when using stop loss on exchange! If set to low/tight you will have greater risk of missing fill on the order and stoploss will not work.
"},{"location":"stoploss/#stoploss_on_exchange-and-stoploss_on_exchange_limit_ratio","title":"stoploss_on_exchange and stoploss_on_exchange_limit_ratio","text":"Enable or Disable stop loss on exchange. If the stoploss is on exchange it means a stoploss limit order is placed on the exchange immediately after buy order fills. This will protect you against sudden crashes in market, as the order execution happens purely within the exchange, and has no potential network overhead.
If stoploss_on_exchange uses limit orders, the exchange needs 2 prices, the stoploss_price and the Limit price. stoploss defines the stop-price where the limit order is placed - and limit should be slightly below this. If an exchange supports both limit and market stoploss orders, then the value of stoploss will be used to determine the stoploss type.
Calculation example: we bought the asset at 100$. Stop-price is 95$, then limit would be 95 * 0.99 = 94.05$ - so the limit order fill can happen between 95$ and 94.05$.
For example, assuming the stoploss is on exchange, and trailing stoploss is enabled, and the market is going up, then the bot automatically cancels the previous stoploss order and puts a new one with a stop value higher than the previous stoploss order.
Note
If stoploss_on_exchange is enabled and the stoploss is cancelled manually on the exchange, then the bot will create a new stoploss order.
In case of stoploss on exchange there is another parameter called stoploss_on_exchange_interval. This configures the interval in seconds at which the bot will check the stoploss and update it if necessary. The bot cannot do these every 5 seconds (at each iteration), otherwise it would get banned by the exchange. So this parameter will tell the bot how often it should update the stoploss order. The default value is 60 (1 minute). This same logic will reapply a stoploss order on the exchange should you cancel it accidentally.
Only applies to futures
stoploss_price_type only applies to futures markets (on exchanges where it's available). Freqtrade will perform a validation of this setting on startup, failing to start if an invalid setting for your exchange has been selected. Supported price types are gonna differs between each exchanges. Please check with your exchange on which price types it supports.
Stoploss on exchange on futures markets can trigger on different price types. The naming for these prices in exchange terminology often varies, but is usually something around \"last\" (or \"contract price\" ), \"mark\" and \"index\".
Acceptable values for this setting are \"last\", \"mark\" and \"index\" - which freqtrade will transfer automatically to the corresponding API type, and place the stoploss on exchange order correspondingly.
force_exit is an optional value, which defaults to the same value as exit and is used when sending a /forceexit command from Telegram or from the Rest API.
force_entry is an optional value, which defaults to the same value as entry and is used when sending a /forceentry command from Telegram or from the Rest API.
emergency_exit is an optional value, which defaults to market and is used when creating stop loss on exchange orders fails. The below is the default which is used if not changed in strategy or configuration file.
Example from strategy file:
order_types = {\n \"entry\": \"limit\",\n \"exit\": \"limit\",\n \"emergency_exit\": \"market\",\n \"stoploss\": \"market\",\n \"stoploss_on_exchange\": True,\n \"stoploss_on_exchange_interval\": 60,\n \"stoploss_on_exchange_limit_ratio\": 0.99\n}\nAt this stage the bot contains the following stoploss support modes:
This is very simple, you define a stop loss of x (as a ratio of price, i.e. x * 100% of price). This will try to sell the asset once the loss exceeds the defined loss.
Example of stop loss:
stoploss = -0.10\nFor example, simplified math:
The initial value for this is stoploss, just as you would define your static Stop loss. To enable trailing stoploss:
stoploss = -0.10\n trailing_stop = True\nThis will now activate an algorithm, which automatically moves the stop loss up every time the price of your asset increases.
For example, simplified math:
In summary: The stoploss will be adjusted to be always be -10% of the highest observed price.
"},{"location":"stoploss/#trailing-stop-loss-different-positive-loss","title":"Trailing stop loss, different positive loss","text":"You could also have a default stop loss when you are in the red with your buy (buy - fee), but once you hit a positive result (or an offset you define) the system will utilize a new stop loss, with a different value. For example, your default stop loss is -10%, but once you have reached profitability (example 0.1%) a different trailing stoploss will be used.
Note
If you want the stoploss to only be changed when you break even of making a profit (what most users want) please refer to next section with offset enabled.
Both values require trailing_stop to be set to true and trailing_stop_positive with a value.
stoploss = -0.10\n trailing_stop = True\n trailing_stop_positive = 0.02\n trailing_stop_positive_offset = 0.0\n trailing_only_offset_is_reached = False # Default - not necessary for this example\nFor example, simplified math:
The 0.02 would translate to a -2% stop loss. Before this, stoploss is used for the trailing stoploss.
Use an offset to change your stoploss
Use trailing_stop_positive_offset to ensure that your new trailing stoploss will be in profit by setting trailing_stop_positive_offset higher than trailing_stop_positive. Your first new stoploss value will then already have locked in profits.
Example with simplified math:
stoploss = -0.10\n trailing_stop = True\n trailing_stop_positive = 0.02\n trailing_stop_positive_offset = 0.03\nYou can also keep a static stoploss until the offset is reached, and then trail the trade to take profits once the market turns.
If trailing_only_offset_is_reached = True then the trailing stoploss is only activated once the offset is reached. Until then, the stoploss remains at the configured stoploss and is not trailing. Leaving this value as trailing_only_offset_is_reached=False will allow the trailing stoploss to start trailing as soon as the asset price increases above the initial entry price.
This option can be used with or without trailing_stop_positive, but uses trailing_stop_positive_offset as offset.
Configuration (offset is buy-price + 3%):
stoploss = -0.10\n trailing_stop = True\n trailing_stop_positive = 0.02\n trailing_stop_positive_offset = 0.03\n trailing_only_offset_is_reached = True\nFor example, simplified math:
Tip
Make sure to have this value (trailing_stop_positive_offset) lower than minimal ROI, otherwise minimal ROI will apply first and sell the trade.
Stoploss should be thought of as \"risk on this trade\" - so a stoploss of 10% on a 100$ trade means you are willing to lose 10$ (10%) on this trade - which would trigger if the price moves 10% to the downside.
When using leverage, the same principle is applied - with stoploss defining the risk on the trade (the amount you are willing to lose).
Therefore, a stoploss of 10% on a 10x trade would trigger on a 1% price move. If your stake amount (own capital) was 100$ - this trade would be 1000$ at 10x (after leverage). If price moves 1% - you've lost 10$ of your own capital - therefore stoploss will trigger in this case.
Make sure to be aware of this, and avoid using too tight stoploss (at 10x leverage, 10% risk may be too little to allow the trade to \"breath\" a little).
"},{"location":"stoploss/#changing-stoploss-on-open-trades","title":"Changing stoploss on open trades","text":"A stoploss on an open trade can be changed by changing the value in the configuration or strategy and use the /reload_config command (alternatively, completely stopping and restarting the bot also works).
The new stoploss value will be applied to open trades (and corresponding log-messages will be generated).
"},{"location":"stoploss/#limitations","title":"Limitations","text":"Stoploss values cannot be changed if trailing_stop is enabled and the stoploss has already been adjusted.
For the purposes of this quick start, we are assuming you are familiar with the basics of trading, and have read the Freqtrade basics page.
"},{"location":"strategy-101/#required-knowledge","title":"Required Knowledge","text":"A strategy in Freqtrade is a Python class that defines the logic for buying and selling cryptocurrency assets.
Assets are defined as pairs, which represent the coin and the stake. The coin is the asset you are trading using another currency as the stake.
Data is supplied by the exchange in the form of candles, which are made up of a six values: date, open, high, low, close and volume.
Technical analysis functions analyse the candle data using various computational and statistical formulae, and produce secondary values called indicators.
Indicators are analysed on the asset pair candles to generate signals.
Signals are turned into orders on a cryptocurrency exchange, i.e. trades.
We use the terms entry and exit instead of buying and selling because Freqtrade supports both long and short trades.
Whilst Freqtrade supports spot and futures markets for certain exchanges, for simplicity we will focus on spot (long) trades only.
"},{"location":"strategy-101/#structure-of-a-basic-strategy","title":"Structure of a Basic Strategy","text":""},{"location":"strategy-101/#main-dataframe","title":"Main dataframe","text":"Freqtrade strategies use a tabular data structure with rows and columns known as a dataframe to generate signals to enter and exit trades.
Each pair in your configured pairlist has its own dataframe. Dataframes are indexed by the date column, e.g. 2024-06-31 12:00.
The next 5 columns represent the open, high, low, close and volume (OHLCV) data.
The populate_indicators function adds columns to the dataframe that represent the technical analysis indicator values.
Examples of common indicators include Relative Strength Index, Bollinger Bands, Money Flow Index, Moving Average, and Average True Range.
Columns are added to the dataframe by calling technical analysis functions, e.g. ta-lib's RSI function ta.RSI(), and assigning them to a column name, e.g. rsi
dataframe['rsi'] = ta.RSI(dataframe)\nDifferent libraries work in different ways to generate indicator values. Please check the documentation of each library to understand how to integrate it into your strategy. You can also check the Freqtrade example strategies to give you ideas.
"},{"location":"strategy-101/#populate-entry-signals","title":"Populate entry signals","text":"The populate_entry_trend function defines conditions for an entry signal.
The dataframe column enter_long is added to the dataframe, and when a value of 1 is in this column, Freqtrade sees an entry signal.
To enter short trades, use the enter_short column.
The populate_exit_trend function defines conditions for an exit signal.
The dataframe column exit_long is added to the dataframe, and when a value of 1 is in this column, Freqtrade sees an exit signal.
To exit short trades, use the exit_short column.
Here is a minimal example of a Freqtrade strategy:
from freqtrade.strategy import IStrategy\nfrom pandas import DataFrame\nimport talib.abstract as ta\n\nclass MyStrategy(IStrategy):\n\n timeframe = '15m'\n\n # set the initial stoploss to -10%\n stoploss = -0.10\n\n # exit profitable positions at any time when the profit is greater than 1%\n minimal_roi = {\"0\": 0.01}\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # generate values for technical analysis indicators\n dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)\n\n return dataframe\n\n def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # generate entry signals based on indicator values\n dataframe.loc[\n (dataframe['rsi'] < 30),\n 'enter_long'] = 1\n\n return dataframe\n\n def populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # generate exit signals based on indicator values\n dataframe.loc[\n (dataframe['rsi'] > 70),\n 'exit_long'] = 1\n\n return dataframe\nWhen a signal is found (a 1 in an entry or exit column), Freqtrade will attempt to make an order, i.e. a trade or position.
Each new trade position takes up a slot. Slots represent the maximum number of concurrent new trades that can be opened.
The number of slots is defined by the max_open_trades configuration option.
However, there can be a range of scenarios where generating a signal does not always create a trade order. These include:
max_open_trades option)Read through the strategy customization documentation for more details.
"},{"location":"strategy-101/#backtesting-and-forward-testing","title":"Backtesting and forward testing","text":"Strategy development can be a long and frustrating process, as turning our human \"gut instincts\" into a working computer-controlled (\"algo\") strategy is not always straightforward.
Therefore a strategy should be tested to verify that it is going to work as intended.
Freqtrade has two testing modes:
Dry runs are enabled by setting dry_run to true in your configuration.
Backtests can be very inaccurate
There are many reasons why backtest results may not match reality. Please check the backtesting assumptions and common strategy mistakes documentation. Some websites that list and rank Freqtrade strategies show impressive backtest results. Do not assume these results are achieveable or realistic.
Useful commandsFreqtrade includes two useful commands to check for basic flaws in strategies: lookahead-analysis and recursive-analysis.
"},{"location":"strategy-101/#assessing-backtesting-and-dry-run-results","title":"Assessing backtesting and dry run results","text":"Always dry run your strategy after backtesting it to see if backtesting and dry run results are sufficiently similar.
If there is any significant difference, verify that your entry and exit signals are consistent and appear on the same candles between the two modes. However, there will always be differences between dry runs and backtests:
Once your bot is running in dry or live mode, Freqtrade has six mechanisms to control or monitor a running bot:
Freqtrade generates extensive debugging logs to help you understand what's happening. Please familiarise yourself with the information and error messages you might see in your bot logs.
Logging by default occurs on standard out (the command line). If you want to write out to a file instead, many freqtrade commands, including the trade command, accept the --logfile option to write to a file.
Check the FAQ for examples.
"},{"location":"strategy-101/#final-thoughts","title":"Final Thoughts","text":"Algo trading is difficult, and most public strategies are not good performers due to the time and effort to make a strategy work profitably in multiple scenarios.
Therefore, taking public strategies and using backtests as a way to assess performance is often problematic. However, Freqtrade provides useful ways to help you make decisions and do your due diligence.
There are many different ways to achieve profitability, and there is no one single tip, trick or config option that will fix a poorly performing strategy.
Freqtrade is an open source platform with a large and helpful community - make sure to visit our discord channel to discuss your strategy with others!
As always, only invest what you are willing to lose.
"},{"location":"strategy-101/#conclusion","title":"Conclusion","text":"Developing a strategy in Freqtrade involves defining entry and exit signals based on technical indicators. By following the structure and methods outlined above, you can create and test your own trading strategies.
Common questions and answers are available on our FAQ.
To continue, refer to the more in-depth Freqtrade strategy customization documentation.
"},{"location":"strategy-advanced/","title":"Advanced Strategies","text":"This page explains some advanced concepts available for strategies. If you're just getting started, please familiarize yourself with the Freqtrade basics and methods described in Strategy Customization first.
The call sequence of the methods described here is covered under bot execution logic. Those docs are also helpful in deciding which method is most suitable for your customisation needs.
Note
Callback methods should only be implemented if a strategy uses them.
Tip
Start off with a strategy template containing all available callback methods by running freqtrade new-strategy --strategy MyAwesomeStrategy --template advanced
Freqtrade allows storing/retrieving user custom information associated with a specific trade in the database.
Using a trade object, information can be stored using trade.set_custom_data(key='my_key', value=my_value) and retrieved using trade.get_custom_data(key='my_key'). Each data entry is associated with a trade and a user supplied key (of type string). This means that this can only be used in callbacks that also provide a trade object.
For the data to be able to be stored within the database, freqtrade must serialized the data. This is done by converting the data to a JSON formatted string. Freqtrade will attempt to reverse this action on retrieval, so from a strategy perspective, this should not be relevant.
from freqtrade.persistence import Trade\nfrom datetime import timedelta\n\nclass AwesomeStrategy(IStrategy):\n\n def bot_loop_start(self, **kwargs) -> None:\n for trade in Trade.get_open_order_trades():\n fills = trade.select_filled_orders(trade.entry_side)\n if trade.pair == 'ETH/USDT':\n trade_entry_type = trade.get_custom_data(key='entry_type')\n if trade_entry_type is None:\n trade_entry_type = 'breakout' if 'entry_1' in trade.enter_tag else 'dip'\n elif fills > 1:\n trade_entry_type = 'buy_up'\n trade.set_custom_data(key='entry_type', value=trade_entry_type)\n return super().bot_loop_start(**kwargs)\n\n def adjust_entry_price(self, trade: Trade, order: Order | None, pair: str,\n current_time: datetime, proposed_rate: float, current_order_rate: float,\n entry_tag: str | None, side: str, **kwargs) -> float:\n # Limit orders to use and follow SMA200 as price target for the first 10 minutes since entry trigger for BTC/USDT pair.\n if (\n pair == 'BTC/USDT' \n and entry_tag == 'long_sma200' \n and side == 'long' \n and (current_time - timedelta(minutes=10)) > trade.open_date_utc \n and order.filled == 0.0\n ):\n dataframe, _ = self.dp.get_analyzed_dataframe(pair=pair, timeframe=self.timeframe)\n current_candle = dataframe.iloc[-1].squeeze()\n # store information about entry adjustment\n existing_count = trade.get_custom_data('num_entry_adjustments', default=0)\n if not existing_count:\n existing_count = 1\n else:\n existing_count += 1\n trade.set_custom_data(key='num_entry_adjustments', value=existing_count)\n\n # adjust order price\n return current_candle['sma_200']\n\n # default: maintain existing order\n return current_order_rate\n\n def custom_exit(self, pair: str, trade: Trade, current_time: datetime, current_rate: float, current_profit: float, **kwargs):\n\n entry_adjustment_count = trade.get_custom_data(key='num_entry_adjustments')\n trade_entry_type = trade.get_custom_data(key='entry_type')\n if entry_adjustment_count is None:\n if current_profit > 0.01 and (current_time - timedelta(minutes=100) > trade.open_date_utc):\n return True, 'exit_1'\n else\n if entry_adjustment_count > 0 and if current_profit > 0.05:\n return True, 'exit_2'\n if trade_entry_type == 'breakout' and current_profit > 0.1:\n return True, 'exit_3\n\n return False, None\nThe above is a simple example - there are simpler ways to retrieve trade data like entry-adjustments.
Note
It is recommended that simple data types are used [bool, int, float, str] to ensure no issues when serializing the data that needs to be stored. Storing big junks of data may lead to unintended side-effects, like a database becoming big (and as a consequence, also slow).
Non-serializable data
If supplied data cannot be serialized a warning is logged and the entry for the specified key will contain None as data.
custom-data has the following accessors through the Trade object (assumed as trade below):
trade.get_custom_data(key='something', default=0) - Returns the actual value given in the type provided.trade.get_custom_data_entry(key='something') - Returns the entry - including metadata. The value is accessible via .value property.trade.set_custom_data(key='something', value={'some': 'value'}) - set or update the corresponding key for this trade. Value must be serializable - and we recommend to keep the stored data relatively small.\"value\" can be any type (both in setting and receiving) - but must be json serializable.
"},{"location":"strategy-advanced/#storing-information-non-persistent","title":"Storing information (Non-Persistent)","text":"Deprecated
This method of storing information is deprecated and we do advise against using non-persistent storage. Please use Persistent Storage instead.
It's content has therefore been collapsed.
Storing informationStoring information can be accomplished by creating a new dictionary within the strategy class.
The name of the variable can be chosen at will, but should be prefixed with custom_ to avoid naming collisions with predefined strategy variables.
class AwesomeStrategy(IStrategy):\n # Create custom dictionary\n custom_info = {}\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # Check if the entry already exists\n if not metadata[\"pair\"] in self.custom_info:\n # Create empty entry for this pair\n self.custom_info[metadata[\"pair\"]] = {}\n\n if \"crosstime\" in self.custom_info[metadata[\"pair\"]]:\n self.custom_info[metadata[\"pair\"]][\"crosstime\"] += 1\n else:\n self.custom_info[metadata[\"pair\"]][\"crosstime\"] = 1\nWarning
The data is not persisted after a bot-restart (or config-reload). Also, the amount of data should be kept smallish (no DataFrames and such), otherwise the bot will start to consume a lot of memory and eventually run out of memory and crash.
Note
If the data is pair-specific, make sure to use pair as one of the keys in the dictionary.
"},{"location":"strategy-advanced/#dataframe-access","title":"Dataframe access","text":"You may access dataframe in various strategy functions by querying it from dataprovider.
from freqtrade.exchange import timeframe_to_prev_date\n\nclass AwesomeStrategy(IStrategy):\n def confirm_trade_exit(self, pair: str, trade: 'Trade', order_type: str, amount: float,\n rate: float, time_in_force: str, exit_reason: str,\n current_time: 'datetime', **kwargs) -> bool:\n # Obtain pair dataframe.\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n\n # Obtain last available candle. Do not use current_time to look up latest candle, because \n # current_time points to current incomplete candle whose data is not available.\n last_candle = dataframe.iloc[-1].squeeze()\n # <...>\n\n # In dry/live runs trade open date will not match candle open date therefore it must be \n # rounded.\n trade_date = timeframe_to_prev_date(self.timeframe, trade.open_date_utc)\n # Look up trade candle.\n trade_candle = dataframe.loc[dataframe['date'] == trade_date]\n # trade_candle may be empty for trades that just opened as it is still incomplete.\n if not trade_candle.empty:\n trade_candle = trade_candle.squeeze()\n # <...>\nUsing .iloc[-1]
You can use .iloc[-1] here because get_analyzed_dataframe() only returns candles that backtesting is allowed to see. This will not work in populate_* methods, so make sure to not use .iloc[] in that area. Also, this will only work starting with version 2021.5.
When your strategy has multiple entry signals, you can name the signal that triggered. Then you can access your entry signal on custom_exit
def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe[\"enter_tag\"] = \"\"\n signal_rsi = (qtpylib.crossed_above(dataframe[\"rsi\"], 35))\n signal_bblower = (dataframe[\"bb_lowerband\"] < dataframe[\"close\"])\n # Additional conditions\n dataframe.loc[\n (\n signal_rsi\n | signal_bblower\n # ... additional signals to enter a long position\n )\n & (dataframe[\"volume\"] > 0)\n , \"enter_long\"\n ] = 1\n # Concatenate the tags so all signals are kept\n dataframe.loc[signal_rsi, \"enter_tag\"] += \"long_signal_rsi \"\n dataframe.loc[signal_bblower, \"enter_tag\"] += \"long_signal_bblower \"\n\n return dataframe\n\ndef custom_exit(self, pair: str, trade: Trade, current_time: datetime, current_rate: float,\n current_profit: float, **kwargs):\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n last_candle = dataframe.iloc[-1].squeeze()\n if \"long_signal_rsi\" in trade.enter_tag and last_candle[\"rsi\"] > 80:\n return \"exit_signal_rsi\"\n if \"long_signal_bblower\" in trade.enter_tag and last_candle[\"high\"] > last_candle[\"bb_upperband\"]:\n return \"exit_signal_bblower\"\n # ...\n return None\nNote
enter_tag is limited to 255 characters, remaining data will be truncated.
Warning
There is only one enter_tag column, which is used for both long and short trades. As a consequence, this column must be treated as \"last write wins\" (it's just a dataframe column after all). In fancy situations, where multiple signals collide (or if signals are deactivated again based on different conditions), this can lead to odd results with the wrong tag applied to an entry signal. These results are a consequence of the strategy overwriting prior tags - where the last tag will \"stick\" and will be the one freqtrade will use.
Similar to Entry Tagging, you can also specify an exit tag.
def populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe[\"exit_tag\"] = \"\"\n rsi_exit_signal = (dataframe[\"rsi\"] > 70)\n ema_exit_signal = (dataframe[\"ema20\"] < dataframe[\"ema50\"])\n # Additional conditions\n dataframe.loc[\n (\n rsi_exit_signal\n | ema_exit_signal\n # ... additional signals to exit a long position\n ) &\n (dataframe[\"volume\"] > 0)\n ,\n \"exit_long\"] = 1\n # Concatenate the tags so all signals are kept\n dataframe.loc[rsi_exit_signal, \"exit_tag\"] += \"exit_signal_rsi \"\n dataframe.loc[rsi_exit_signal2, \"exit_tag\"] += \"exit_signal_rsi \"\n\n return dataframe\nThe provided exit-tag is then used as exit-reason - and shown as such in backtest results.
Note
exit_reason is limited to 100 characters, remaining data will be truncated.
You can implement custom strategy versioning by using the \"version\" method, and returning the version you would like this strategy to have.
def version(self) -> str:\n \"\"\"\n Returns version of the strategy.\n \"\"\"\n return \"1.1\"\nNote
You should make sure to implement proper version control (like a git repository) alongside this, as freqtrade will not keep historic versions of your strategy, so it's up to the user to be able to eventually roll back to a prior version of the strategy.
"},{"location":"strategy-advanced/#derived-strategies","title":"Derived strategies","text":"The strategies can be derived from other strategies. This avoids duplication of your custom strategy code. You can use this technique to override small parts of your main strategy, leaving the rest untouched:
user_data/strategies/myawesomestrategy.pyclass MyAwesomeStrategy(IStrategy):\n ...\n stoploss = 0.13\n trailing_stop = False\n # All other attributes and methods are here as they\n # should be in any custom strategy...\n ...\nfrom myawesomestrategy import MyAwesomeStrategy\nclass MyAwesomeStrategy2(MyAwesomeStrategy):\n # Override something\n stoploss = 0.08\n trailing_stop = True\nBoth attributes and methods may be overridden, altering behavior of the original strategy in a way you need.
While keeping the subclass in the same file is technically possible, it can lead to some problems with hyperopt parameter files, we therefore recommend to use separate strategy files, and import the parent strategy as shown above.
"},{"location":"strategy-advanced/#embedding-strategies","title":"Embedding Strategies","text":"Freqtrade provides you with an easy way to embed the strategy into your configuration file. This is done by utilizing BASE64 encoding and providing this string at the strategy configuration field, in your chosen config file.
"},{"location":"strategy-advanced/#encoding-a-string-as-base64","title":"Encoding a string as BASE64","text":"This is a quick example, how to generate the BASE64 string in python
from base64 import urlsafe_b64encode\n\nwith open(file, 'r') as f:\n content = f.read()\ncontent = urlsafe_b64encode(content.encode('utf-8'))\nThe variable 'content', will contain the strategy file in a BASE64 encoded form. Which can now be set in your configurations file as following
\"strategy\": \"NameOfStrategy:BASE64String\"\nPlease ensure that 'NameOfStrategy' is identical to the strategy name!
"},{"location":"strategy-advanced/#performance-warning","title":"Performance warning","text":"When executing a strategy, one can sometimes be greeted by the following in the logs
PerformanceWarning: DataFrame is highly fragmented.
This is a warning from pandas and as the warning continues to say: use pd.concat(axis=1). This can have slight performance implications, which are usually only visible during hyperopt (when optimizing an indicator).
For example:
for val in self.buy_ema_short.range:\n dataframe[f'ema_short_{val}'] = ta.EMA(dataframe, timeperiod=val)\nshould be rewritten to
frames = [dataframe]\nfor val in self.buy_ema_short.range:\n frames.append(DataFrame({\n f'ema_short_{val}': ta.EMA(dataframe, timeperiod=val)\n }))\n\n# Combine all dataframes, and reassign the original dataframe column\ndataframe = pd.concat(frames, axis=1)\nFreqtrade does however also counter this by running dataframe.copy() on the dataframe right after the populate_indicators() method - so performance implications of this should be low to non-existent.
While the main strategy functions (populate_indicators(), populate_entry_trend(), populate_exit_trend()) should be used in a vectorized way, and are only called once during backtesting, callbacks are called \"whenever needed\".
As such, you should avoid doing heavy calculations in callbacks to avoid delays during operations. Depending on the callback used, they may be called when entering / exiting a trade, or throughout the duration of a trade.
Currently available callbacks:
bot_start()bot_loop_start()custom_stake_amount()custom_exit()custom_stoploss()custom_roi()custom_entry_price() and custom_exit_price()check_entry_timeout() and check_exit_timeout()confirm_trade_entry()confirm_trade_exit()adjust_trade_position()adjust_entry_price()leverage()order_filled()Callback calling sequence
You can find the callback calling sequence in bot-basics
"},{"location":"strategy-callbacks/#imports-necessary-for-a-strategy","title":"Imports necessary for a strategy","text":"When creating a strategy, you will need to import the necessary modules and classes. The following imports are required for a strategy:
By default, we recommend the following imports as a base line for your strategy: This will cover all imports necessary for freqtrade functions to work. Obviously you can add more imports as needed for your strategy.
# flake8: noqa: F401\n# isort: skip_file\n# --- Do not remove these imports ---\nimport numpy as np\nimport pandas as pd\nfrom datetime import datetime, timedelta, timezone\nfrom pandas import DataFrame\nfrom typing import Dict, Optional, Union, Tuple\n\nfrom freqtrade.strategy import (\n IStrategy,\n Trade, \n Order,\n PairLocks,\n informative, # @informative decorator\n # Hyperopt Parameters\n BooleanParameter,\n CategoricalParameter,\n DecimalParameter,\n IntParameter,\n RealParameter,\n # timeframe helpers\n timeframe_to_minutes,\n timeframe_to_next_date,\n timeframe_to_prev_date,\n # Strategy helper functions\n merge_informative_pair,\n stoploss_from_absolute,\n stoploss_from_open,\n)\n\n# --------------------------------\n# Add your lib to import here\nimport talib.abstract as ta\nfrom technical import qtpylib\nFreqtrade allows your strategy to implement different exit logic using signal-based or callback-based functions. This section aims to compare each different function, helping you to choose the one that best fits your needs.
populate_exit_trend() - Vectorized signal-based exit logic using indicators in the main dataframe \u2705 Use to define exit signals based on indicators or other data that can be calculated in a vectorized manner. \ud83d\udeab Don't use to customize exit conditions for each individual trade, or if trade data is necessary to make an exit decision.custom_exit() - Custom exit logic that will fully exit a trade immediately, called for every open trade at every bot loop iteration until a trade is closed. \u2705 Use to specify exit conditions for each individual trade (including any additional adjusted orders using adjust_trade_position()), or if trade data is necessary to make an exit decision, e.g. using profit data to exit. \ud83d\udeab Don't use when you want to exit using vectorised indicator-based data (use a populate_exit_trend() signal instead), or as a proxy for custom_stoploss(), and be aware that rate-based exits in backtesting can be inaccurate.custom_stoploss() - Custom trailing stoploss, called for every open trade every iteration until a trade is closed. The value returned here is also used for stoploss on exchange. \u2705 Use to customize the stoploss logic to set a dynamic stoploss based on trade data or other conditions. \ud83d\udeab Don't use to exit a trade immediately based on a specific condition. Use custom_exit() for that purpose.custom_roi() - Custom ROI, called for every open trade every iteration until a trade is closed. \u2705 Use to specify a minimum ROI threshold (\"take-profit\") to exit a trade at this ROI level at some point within the trade duration, based on profit or other conditions. \ud83d\udeab Don't use to exit a trade immediately based on a specific condition. Use custom_exit(). \ud83d\udeab Don't use for static ROI. Use minimal_roi.A simple callback which is called once when the strategy is loaded. This can be used to perform actions that must only be performed once and runs after dataprovider and wallet are set
import requests\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n def bot_start(self, **kwargs) -> None:\n \"\"\"\n Called only once after bot instantiation.\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n \"\"\"\n if self.config[\"runmode\"].value in (\"live\", \"dry_run\"):\n # Assign this to the class by using self.*\n # can then be used by populate_* methods\n self.custom_remote_data = requests.get(\"https://some_remote_source.example.com\")\nDuring hyperopt, this runs only once at startup.
"},{"location":"strategy-callbacks/#bot-loop-start","title":"Bot loop start","text":"A simple callback which is called once at the start of every bot throttling iteration in dry/live mode (roughly every 5 seconds, unless configured differently) or once per candle in backtest/hyperopt mode. This can be used to perform calculations which are pair independent (apply to all pairs), loading of external data, etc.
# Default imports\nimport requests\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n def bot_loop_start(self, current_time: datetime, **kwargs) -> None:\n \"\"\"\n Called at the start of the bot iteration (one loop).\n Might be used to perform pair-independent tasks\n (e.g. gather some remote resource for comparison)\n :param current_time: datetime object, containing the current datetime\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n \"\"\"\n if self.config[\"runmode\"].value in (\"live\", \"dry_run\"):\n # Assign this to the class by using self.*\n # can then be used by populate_* methods\n self.remote_data = requests.get(\"https://some_remote_source.example.com\")\nCalled before entering a trade, makes it possible to manage your position size when placing a new trade.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n def custom_stake_amount(self, pair: str, current_time: datetime, current_rate: float,\n proposed_stake: float, min_stake: float | None, max_stake: float,\n leverage: float, entry_tag: str | None, side: str,\n **kwargs) -> float:\n\n dataframe, _ = self.dp.get_analyzed_dataframe(pair=pair, timeframe=self.timeframe)\n current_candle = dataframe.iloc[-1].squeeze()\n\n if current_candle[\"fastk_rsi_1h\"] > current_candle[\"fastd_rsi_1h\"]:\n if self.config[\"stake_amount\"] == \"unlimited\":\n # Use entire available wallet during favorable conditions when in compounding mode.\n return max_stake\n else:\n # Compound profits during favorable conditions instead of using a static stake.\n return self.wallets.get_total_stake_amount() / self.config[\"max_open_trades\"]\n\n # Use default stake amount.\n return proposed_stake\nFreqtrade will fall back to the proposed_stake value should your code raise an exception. The exception itself will be logged.
Tip
You do not have to ensure that min_stake <= returned_value <= max_stake. Trades will succeed as the returned value will be clamped to supported range and this action will be logged.
Tip
Returning 0 or None will prevent trades from being placed.
Called for open trade every throttling iteration (roughly every 5 seconds) until a trade is closed.
Allows to define custom exit signals, indicating that specified position should be closed (full exit). This is very useful when we need to customize exit conditions for each individual trade, or if you need trade data to make an exit decision.
For example you could implement a 1:2 risk-reward ROI with custom_exit().
Using custom_exit() signals in place of stoploss though is not recommended. It is a inferior method to using custom_stoploss() in this regard - which also allows you to keep the stoploss on exchange.
Note
Returning a (none-empty) string or True from this method is equal to setting exit signal on a candle at specified time. This method is not called when exit signal is set already, or if exit signals are disabled (use_exit_signal=False). string max length is 64 characters. Exceeding this limit will cause the message to be truncated to 64 characters. custom_exit() will ignore exit_profit_only, and will always be called unless use_exit_signal=False, even if there is a new enter signal.
An example of how we can use different indicators depending on the current profit and also exit trades that were open longer than one day:
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n def custom_exit(self, pair: str, trade: Trade, current_time: datetime, current_rate: float,\n current_profit: float, **kwargs):\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n last_candle = dataframe.iloc[-1].squeeze()\n\n # Above 20% profit, sell when rsi < 80\n if current_profit > 0.2:\n if last_candle[\"rsi\"] < 80:\n return \"rsi_below_80\"\n\n # Between 2% and 10%, sell if EMA-long above EMA-short\n if 0.02 < current_profit < 0.1:\n if last_candle[\"emalong\"] > last_candle[\"emashort\"]:\n return \"ema_long_below_80\"\n\n # Sell any positions at a loss if they are held for more than one day.\n if current_profit < 0.0 and (current_time - trade.open_date_utc).days >= 1:\n return \"unclog\"\nSee Dataframe access for more information about dataframe use in strategy callbacks.
"},{"location":"strategy-callbacks/#custom-stoploss","title":"Custom stoploss","text":"Called for open trade every iteration (roughly every 5 seconds) until a trade is closed.
The usage of the custom stoploss method must be enabled by setting use_custom_stoploss=True on the strategy object.
The stoploss price can only ever move upwards - if the stoploss value returned from custom_stoploss would result in a lower stoploss price than was previously set, it will be ignored. The traditional stoploss value serves as an absolute lower level and will be instated as the initial stoploss (before this method is called for the first time for a trade), and is still mandatory. As custom stoploss acts as regular, changing stoploss, it will behave similar to trailing_stop - and trades exiting due to this will have the exit_reason of \"trailing_stop_loss\".
The method must return a stoploss value (float / number) as a percentage of the current price. E.g. If the current_rate is 200 USD, then returning 0.02 will set the stoploss price 2% lower, at 196 USD. During backtesting, current_rate (and current_profit) are provided against the candle's high (or low for short trades) - while the resulting stoploss is evaluated against the candle's low (or high for short trades).
The absolute value of the return value is used (the sign is ignored), so returning 0.05 or -0.05 have the same result, a stoploss 5% below the current price. Returning None will be interpreted as \"no desire to change\", and is the only safe way to return when you'd like to not modify the stoploss. NaN and inf values are considered invalid and will be ignored (identical to None).
Stoploss on exchange works similar to trailing_stop, and the stoploss on exchange is updated as configured in stoploss_on_exchange_interval (More details about stoploss on exchange).
If you're on futures markets, please take note of the stoploss and leverage section, as the stoploss value returned from custom_stoploss is the risk for this trade - not the relative price movement.
Use of dates
All time-based calculations should be done based on current_time - using datetime.now() or datetime.utcnow() is discouraged, as this will break backtesting support.
Trailing stoploss
It's recommended to disable trailing_stop when using custom stoploss values. Both can work in tandem, but you might encounter the trailing stop to move the price higher while your custom function would not want this, causing conflicting behavior.
Depending on your strategy, you may encounter the need to adjust the stoploss in both directions after a position adjustment. For this, freqtrade will make an additional call with after_fill=True after an order fills, which will allow the strategy to move the stoploss in any direction (also widening the gap between stoploss and current price, which is otherwise forbidden).
backwards compatibility
This call will only be made if the after_fill parameter is part of the function definition of your custom_stoploss function. As such, this will not impact (and with that, surprise) existing, running strategies.
The next section will show some examples on what's possible with the custom stoploss function. Of course, many more things are possible, and all examples can be combined at will.
"},{"location":"strategy-callbacks/#trailing-stop-via-custom-stoploss","title":"Trailing stop via custom stoploss","text":"To simulate a regular trailing stoploss of 4% (trailing 4% behind the maximum reached price) you would use the following very simple method:
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool, \n **kwargs) -> float | None:\n \"\"\"\n Custom stoploss logic, returning the new distance relative to current_rate (as ratio).\n e.g. returning -0.05 would create a stoploss 5% below current_rate.\n The custom stoploss can never be below self.stoploss, which serves as a hard maximum loss.\n\n For full documentation please go to https://www.freqtrade.io/en/latest/strategy-advanced/\n\n When not implemented by a strategy, returns the initial stoploss value.\n Only called when use_custom_stoploss is set to True.\n\n :param pair: Pair that's currently analyzed\n :param trade: trade object.\n :param current_time: datetime object, containing the current datetime\n :param current_rate: Rate, calculated based on pricing settings in exit_pricing.\n :param current_profit: Current profit (as ratio), calculated based on current_rate.\n :param after_fill: True if the stoploss is called after the order was filled.\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n :return float: New stoploss value, relative to the current_rate\n \"\"\"\n return -0.04 * trade.leverage\nUse the initial stoploss for the first 60 minutes, after this change to 10% trailing stoploss, and after 2 hours (120 minutes) we use a 5% trailing stoploss.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool, \n **kwargs) -> float | None:\n\n # Make sure you have the longest interval first - these conditions are evaluated from top to bottom.\n if current_time - timedelta(minutes=120) > trade.open_date_utc:\n return -0.05 * trade.leverage\n elif current_time - timedelta(minutes=60) > trade.open_date_utc:\n return -0.10 * trade.leverage\n return None\nUse the initial stoploss for the first 60 minutes, after this change to 10% trailing stoploss, and after 2 hours (120 minutes) we use a 5% trailing stoploss. If an additional order fills, set stoploss to -10% below the new open_rate (Averaged across all entries).
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool, \n **kwargs) -> float | None:\n\n if after_fill: \n # After an additional order, start with a stoploss of 10% below the new open rate\n return stoploss_from_open(0.10, current_profit, is_short=trade.is_short, leverage=trade.leverage)\n # Make sure you have the longest interval first - these conditions are evaluated from top to bottom.\n if current_time - timedelta(minutes=120) > trade.open_date_utc:\n return -0.05 * trade.leverage\n elif current_time - timedelta(minutes=60) > trade.open_date_utc:\n return -0.10 * trade.leverage\n return None\nUse a different stoploss depending on the pair. In this example, we'll trail the highest price with 10% trailing stoploss for ETH/BTC and XRP/BTC, with 5% trailing stoploss for LTC/BTC and with 15% for all other pairs.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool,\n **kwargs) -> float | None:\n\n if pair in (\"ETH/BTC\", \"XRP/BTC\"):\n return -0.10 * trade.leverage\n elif pair in (\"LTC/BTC\"):\n return -0.05 * trade.leverage\n return -0.15 * trade.leverage\nUse the initial stoploss until the profit is above 4%, then use a trailing stoploss of 50% of the current profit with a minimum of 2.5% and a maximum of 5%.
Please note that the stoploss can only increase, values lower than the current stoploss are ignored.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool,\n **kwargs) -> float | None:\n\n if current_profit < 0.04:\n return None # return None to keep using the initial stoploss\n\n # After reaching the desired offset, allow the stoploss to trail by half the profit\n desired_stoploss = current_profit / 2\n\n # Use a minimum of 2.5% and a maximum of 5%\n return max(min(desired_stoploss, 0.05), 0.025) * trade.leverage\nInstead of continuously trailing behind the current price, this example sets fixed stoploss price levels based on the current profit.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool,\n **kwargs) -> float | None:\n\n # evaluate highest to lowest, so that highest possible stop is used\n if current_profit > 0.40:\n return stoploss_from_open(0.25, current_profit, is_short=trade.is_short, leverage=trade.leverage)\n elif current_profit > 0.25:\n return stoploss_from_open(0.15, current_profit, is_short=trade.is_short, leverage=trade.leverage)\n elif current_profit > 0.20:\n return stoploss_from_open(0.07, current_profit, is_short=trade.is_short, leverage=trade.leverage)\n\n # return maximum stoploss value, keeping current stoploss price unchanged\n return None\nAbsolute stoploss value may be derived from indicators stored in dataframe. Example uses parabolic SAR below the price as stoploss.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # <...>\n dataframe[\"sar\"] = ta.SAR(dataframe)\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool,\n **kwargs) -> float | None:\n\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n last_candle = dataframe.iloc[-1].squeeze()\n\n # Use parabolic sar as absolute stoploss price\n stoploss_price = last_candle[\"sar\"]\n\n # Convert absolute price to percentage relative to current_rate\n if stoploss_price < current_rate:\n return stoploss_from_absolute(stoploss_price, current_rate, is_short=trade.is_short)\n\n # return maximum stoploss value, keeping current stoploss price unchanged\n return None\nSee Dataframe access for more information about dataframe use in strategy callbacks.
"},{"location":"strategy-callbacks/#common-helpers-for-stoploss-calculations","title":"Common helpers for stoploss calculations","text":""},{"location":"strategy-callbacks/#stoploss-relative-to-open-price","title":"Stoploss relative to open price","text":"Stoploss values returned from custom_stoploss() must specify a percentage relative to current_rate, but sometimes you may want to specify a stoploss relative to the entry price instead. stoploss_from_open() is a helper function to calculate a stoploss value that can be returned from custom_stoploss which will be equivalent to the desired trade profit above the entry point.
Say the open price was $100, and current_price is $121 (current_profit will be 0.21).
If we want a stop price at 7% above the open price we can call stoploss_from_open(0.07, current_profit, False) which will return 0.1157024793. 11.57% below $121 is $107, which is the same as 7% above $100.
This function will consider leverage - so at 10x leverage, the actual stoploss would be 0.7% above $100 (0.7% * 10x = 7%).
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n use_custom_stoploss = True\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool,\n **kwargs) -> float | None:\n\n # once the profit has risen above 10%, keep the stoploss at 7% above the open price\n if current_profit > 0.10:\n return stoploss_from_open(0.07, current_profit, is_short=trade.is_short, leverage=trade.leverage)\n\n return 1\nFull examples can be found in the Custom stoploss section of the Documentation.
Note
Providing invalid input to stoploss_from_open() may produce \"CustomStoploss function did not return valid stoploss\" warnings. This may happen if current_profit parameter is below specified open_relative_stop. Such situations may arise when closing trade is blocked by confirm_trade_exit() method. Warnings can be solved by never blocking stop loss sells by checking exit_reason in confirm_trade_exit(), or by using return stoploss_from_open(...) or 1 idiom, which will request to not change stop loss when current_profit < open_relative_stop.
Stoploss values returned from custom_stoploss() always specify a percentage relative to current_rate. In order to set a stoploss at specified absolute price level, we need to use stop_rate to calculate what percentage relative to the current_rate will give you the same result as if the percentage was specified from the open price.
The helper function stoploss_from_absolute() can be used to convert from an absolute price, to a current price relative stop which can be returned from custom_stoploss().
If we want to trail a stop price at 2xATR below current price we can call stoploss_from_absolute(current_rate + (side * candle[\"atr\"] * 2), current_rate=current_rate, is_short=trade.is_short, leverage=trade.leverage). For futures, we need to adjust the direction (up or down), as well as adjust for leverage, since the custom_stoploss callback returns the \"risk for this trade\" - not the relative price movement.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n use_custom_stoploss = True\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe[\"atr\"] = ta.ATR(dataframe, timeperiod=14)\n return dataframe\n\n def custom_stoploss(self, pair: str, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool,\n **kwargs) -> float | None:\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n trade_date = timeframe_to_prev_date(self.timeframe, trade.open_date_utc)\n candle = dataframe.iloc[-1].squeeze()\n side = 1 if trade.is_short else -1\n return stoploss_from_absolute(current_rate + (side * candle[\"atr\"] * 2), \n current_rate=current_rate, \n is_short=trade.is_short,\n leverage=trade.leverage)\nCalled for open trade every iteration (roughly every 5 seconds) until a trade is closed.
The usage of the custom ROI method must be enabled by setting use_custom_roi=True on the strategy object.
This method allows you to define a custom minimum ROI threshold for exiting a trade, expressed as a ratio (e.g., 0.05 for 5% profit). If both minimal_roi and custom_roi are defined, the lower of the two thresholds will trigger an exit. For example, if minimal_roi is set to {\"0\": 0.10} (10% at 0 minutes) and custom_roi returns 0.05, the trade will exit when the profit reaches 5%. Also, if custom_roi returns 0.10 and minimal_roi is set to {\"0\": 0.05} (5% at 0 minutes), the trade will be closed when the profit reaches 5%.
The method must return a float representing the new ROI threshold as a ratio, or None to fall back to the minimal_roi logic. Returning NaN or inf values is considered invalid and will be treated as None, causing the bot to use the minimal_roi configuration.
The following examples illustrate how to use the custom_roi function to implement different ROI logics.
Use different ROI thresholds depending on the side. In this example, 5% for long entries and 2% for short entries.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n use_custom_roi = True\n\n # ... populate_* methods\n\n def custom_roi(self, pair: str, trade: Trade, current_time: datetime, trade_duration: int,\n entry_tag: str | None, side: str, **kwargs) -> float | None:\n \"\"\"\n Custom ROI logic, returns a new minimum ROI threshold (as a ratio, e.g., 0.05 for +5%).\n Only called when use_custom_roi is set to True.\n\n If used at the same time as minimal_roi, an exit will be triggered when the lower\n threshold is reached. Example: If minimal_roi = {\"0\": 0.01} and custom_roi returns 0.05,\n an exit will be triggered if profit reaches 5%.\n\n :param pair: Pair that's currently analyzed.\n :param trade: trade object.\n :param current_time: datetime object, containing the current datetime.\n :param trade_duration: Current trade duration in minutes.\n :param entry_tag: Optional entry_tag (buy_tag) if provided with the buy signal.\n :param side: 'long' or 'short' - indicating the direction of the current trade.\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n :return float: New ROI value as a ratio, or None to fall back to minimal_roi logic.\n \"\"\"\n return 0.05 if side == \"long\" else 0.02\nUse different ROI thresholds depending on the pair.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n use_custom_roi = True\n\n # ... populate_* methods\n\n def custom_roi(self, pair: str, trade: Trade, current_time: datetime, trade_duration: int,\n entry_tag: str | None, side: str, **kwargs) -> float | None:\n\n stake = trade.stake_currency\n roi_map = {\n f\"BTC/{stake}\": 0.02, # 2% for BTC\n f\"ETH/{stake}\": 0.03, # 3% for ETH\n f\"XRP/{stake}\": 0.04, # 4% for XRP\n }\n\n return roi_map.get(pair, 0.01) # 1% for any other pair\nUse different ROI thresholds depending on the entry_tag provided with the buy signal.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n use_custom_roi = True\n\n # ... populate_* methods\n\n def custom_roi(self, pair: str, trade: Trade, current_time: datetime, trade_duration: int,\n entry_tag: str | None, side: str, **kwargs) -> float | None:\n\n roi_by_tag = {\n \"breakout\": 0.08, # 8% if tag is \"breakout\"\n \"rsi_overbought\": 0.05, # 5% if tag is \"rsi_overbought\"\n \"mean_reversion\": 0.03, # 3% if tag is \"mean_reversion\"\n }\n\n return roi_by_tag.get(entry_tag, 0.01) # 1% if tag is unknown\nROI value may be derived from indicators stored in dataframe. This example uses the ATR ratio as ROI.
# Default imports\n# <...>\nimport talib.abstract as ta\n\nclass AwesomeStrategy(IStrategy):\n\n use_custom_roi = True\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # <...>\n dataframe[\"atr\"] = ta.ATR(dataframe, timeperiod=10)\n\n def custom_roi(self, pair: str, trade: Trade, current_time: datetime, trade_duration: int,\n entry_tag: str | None, side: str, **kwargs) -> float | None:\n\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n last_candle = dataframe.iloc[-1].squeeze()\n atr_ratio = last_candle[\"atr\"] / last_candle[\"close\"]\n\n return atr_ratio # Returns the ATR value as ratio\nBy default, freqtrade use the orderbook to automatically set an order price(Relevant documentation), you also have the option to create custom order prices based on your strategy.
You can use this feature by creating a custom_entry_price() function in your strategy file to customize entry prices and custom_exit_price() for exits.
Each of these methods are called right before placing an order on the exchange.
Note
If your custom pricing function return None or an invalid value, price will fall back to proposed_rate, which is based on the regular pricing configuration.
Note
Using custom_entry_price, the Trade object will be available as soon as the first entry order associated with the trade is created, for the first entry, trade parameter value will be None.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n def custom_entry_price(self, pair: str, trade: Trade | None, current_time: datetime, proposed_rate: float,\n entry_tag: str | None, side: str, **kwargs) -> float:\n\n dataframe, last_updated = self.dp.get_analyzed_dataframe(pair=pair,\n timeframe=self.timeframe)\n new_entryprice = dataframe[\"bollinger_10_lowerband\"].iat[-1]\n\n return new_entryprice\n\n def custom_exit_price(self, pair: str, trade: Trade,\n current_time: datetime, proposed_rate: float,\n current_profit: float, exit_tag: str | None, **kwargs) -> float:\n\n dataframe, last_updated = self.dp.get_analyzed_dataframe(pair=pair,\n timeframe=self.timeframe)\n new_exitprice = dataframe[\"bollinger_10_upperband\"].iat[-1]\n\n return new_exitprice\nWarning
Modifying entry and exit prices will only work for limit orders. Depending on the price chosen, this can result in a lot of unfilled orders. By default the maximum allowed distance between the current price and the custom price is 2%, this value can be changed in config with the custom_price_max_distance_ratio parameter. Example: If the new_entryprice is 97, the proposed_rate is 100 and the custom_price_max_distance_ratio is set to 2%, The retained valid custom entry price will be 98, which is 2% below the current (proposed) rate.
Backtesting
Custom prices are supported in backtesting (starting with 2021.12), and orders will fill if the price falls within the candle's low/high range. Orders that don't fill immediately are subject to regular timeout handling, which happens once per (detail) candle. custom_exit_price() is only called for sells of type exit_signal, Custom exit and partial exits. All other exit-types will use regular backtesting prices.
Simple, time-based order-timeouts can be configured either via strategy or in the configuration in the unfilledtimeout section.
However, freqtrade also offers a custom callback for both order types, which allows you to decide based on custom criteria if an order did time out or not.
Note
Backtesting fills orders if their price falls within the candle's low/high range. The below callbacks will be called once per (detail) candle for orders that don't fill immediately (which use custom pricing).
"},{"location":"strategy-callbacks/#custom-order-timeout-example","title":"Custom order timeout example","text":"Called for every open order until that order is either filled or cancelled. check_entry_timeout() is called for trade entries, while check_exit_timeout() is called for trade exit orders.
A simple example, which applies different unfilled-timeouts depending on the price of the asset can be seen below. It applies a tight timeout for higher priced assets, while allowing more time to fill on cheap coins.
The function must return either True (cancel order) or False (keep order alive).
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n # Set unfilledtimeout to 25 hours, since the maximum timeout from below is 24 hours.\n unfilledtimeout = {\n \"entry\": 60 * 25,\n \"exit\": 60 * 25\n }\n\n def check_entry_timeout(self, pair: str, trade: Trade, order: Order,\n current_time: datetime, **kwargs) -> bool:\n if trade.open_rate > 100 and trade.open_date_utc < current_time - timedelta(minutes=5):\n return True\n elif trade.open_rate > 10 and trade.open_date_utc < current_time - timedelta(minutes=3):\n return True\n elif trade.open_rate < 1 and trade.open_date_utc < current_time - timedelta(hours=24):\n return True\n return False\n\n\n def check_exit_timeout(self, pair: str, trade: Trade, order: Order,\n current_time: datetime, **kwargs) -> bool:\n if trade.open_rate > 100 and trade.open_date_utc < current_time - timedelta(minutes=5):\n return True\n elif trade.open_rate > 10 and trade.open_date_utc < current_time - timedelta(minutes=3):\n return True\n elif trade.open_rate < 1 and trade.open_date_utc < current_time - timedelta(hours=24):\n return True\n return False\nNote
For the above example, unfilledtimeout must be set to something bigger than 24h, otherwise that type of timeout will apply first.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n # Set unfilledtimeout to 25 hours, since the maximum timeout from below is 24 hours.\n unfilledtimeout = {\n \"entry\": 60 * 25,\n \"exit\": 60 * 25\n }\n\n def check_entry_timeout(self, pair: str, trade: Trade, order: Order,\n current_time: datetime, **kwargs) -> bool:\n ob = self.dp.orderbook(pair, 1)\n current_price = ob[\"bids\"][0][0]\n # Cancel buy order if price is more than 2% above the order.\n if current_price > order.price * 1.02:\n return True\n return False\n\n\n def check_exit_timeout(self, pair: str, trade: Trade, order: Order,\n current_time: datetime, **kwargs) -> bool:\n ob = self.dp.orderbook(pair, 1)\n current_price = ob[\"asks\"][0][0]\n # Cancel sell order if price is more than 2% below the order.\n if current_price < order.price * 0.98:\n return True\n return False\nConfirm trade entry / exits. This are the last methods that will be called before an order is placed.
"},{"location":"strategy-callbacks/#trade-entry-buy-order-confirmation","title":"Trade entry (buy order) confirmation","text":"confirm_trade_entry() can be used to abort a trade entry at the latest second (maybe because the price is not what we expect).
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n def confirm_trade_entry(self, pair: str, order_type: str, amount: float, rate: float,\n time_in_force: str, current_time: datetime, entry_tag: str | None,\n side: str, **kwargs) -> bool:\n \"\"\"\n Called right before placing a entry order.\n Timing for this function is critical, so avoid doing heavy computations or\n network requests in this method.\n\n For full documentation please go to https://www.freqtrade.io/en/latest/strategy-advanced/\n\n When not implemented by a strategy, returns True (always confirming).\n\n :param pair: Pair that's about to be bought/shorted.\n :param order_type: Order type (as configured in order_types). usually limit or market.\n :param amount: Amount in target (base) currency that's going to be traded.\n :param rate: Rate that's going to be used when using limit orders \n or current rate for market orders.\n :param time_in_force: Time in force. Defaults to GTC (Good-til-cancelled).\n :param current_time: datetime object, containing the current datetime\n :param entry_tag: Optional entry_tag (buy_tag) if provided with the buy signal.\n :param side: \"long\" or \"short\" - indicating the direction of the proposed trade\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n :return bool: When True is returned, then the buy-order is placed on the exchange.\n False aborts the process\n \"\"\"\n return True\nconfirm_trade_exit() can be used to abort a trade exit (sell) at the latest second (maybe because the price is not what we expect).
confirm_trade_exit() may be called multiple times within one iteration for the same trade if different exit-reasons apply. The exit-reasons (if applicable) will be in the following sequence:
exit_signal / custom_exitstop_lossroitrailing_stop_loss# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n def confirm_trade_exit(self, pair: str, trade: Trade, order_type: str, amount: float,\n rate: float, time_in_force: str, exit_reason: str,\n current_time: datetime, **kwargs) -> bool:\n \"\"\"\n Called right before placing a regular exit order.\n Timing for this function is critical, so avoid doing heavy computations or\n network requests in this method.\n\n For full documentation please go to https://www.freqtrade.io/en/latest/strategy-advanced/\n\n When not implemented by a strategy, returns True (always confirming).\n\n :param pair: Pair for trade that's about to be exited.\n :param trade: trade object.\n :param order_type: Order type (as configured in order_types). usually limit or market.\n :param amount: Amount in base currency.\n :param rate: Rate that's going to be used when using limit orders\n or current rate for market orders.\n :param time_in_force: Time in force. Defaults to GTC (Good-til-cancelled).\n :param exit_reason: Exit reason.\n Can be any of [\"roi\", \"stop_loss\", \"stoploss_on_exchange\", \"trailing_stop_loss\",\n \"exit_signal\", \"force_exit\", \"emergency_exit\"]\n :param current_time: datetime object, containing the current datetime\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n :return bool: When True, then the exit-order is placed on the exchange.\n False aborts the process\n \"\"\"\n if exit_reason == \"force_exit\" and trade.calc_profit_ratio(rate) < 0:\n # Reject force-sells with negative profit\n # This is just a sample, please adjust to your needs\n # (this does not necessarily make sense, assuming you know when you're force-selling)\n return False\n return True\nWarning
confirm_trade_exit() can prevent stoploss exits, causing significant losses as this would ignore stoploss exits. confirm_trade_exit() will not be called for Liquidations - as liquidations are forced by the exchange, and therefore cannot be rejected.
The position_adjustment_enable strategy property enables the usage of adjust_trade_position() callback in the strategy. For performance reasons, it's disabled by default and freqtrade will show a warning message on startup if enabled. adjust_trade_position() can be used to perform additional orders, for example to manage risk with DCA (Dollar Cost Averaging) or to increase or decrease positions.
Additional orders also result in additional fees and those orders don't count towards max_open_trades.
This callback is also called when there is an open order (either buy or sell) waiting for execution - and will cancel the existing open order to place a new order if the amount, price or direction is different. Also partially filled orders will be canceled, and will be replaced with the new amount as returned by the callback.
adjust_trade_position() is called very frequently for the duration of a trade, so you must keep your implementation as performant as possible.
Position adjustments will always be applied in the direction of the trade, so a positive value will always increase your position (negative values will decrease your position), no matter if it's a long or short trade. Adjustment orders can be assigned with a tag by returning a 2 element Tuple, with the first element being the adjustment amount, and the 2nd element the tag (e.g. return 250, \"increase_favorable_conditions\").
Modifications to leverage are not possible, and the stake-amount returned is assumed to be before applying leverage.
The combined stake currently allocated to the position is held in trade.stake_amount. Therefore trade.stake_amount will always be updated on every additional entry and partial exit made through adjust_trade_position().
Loose Logic
On dry and live run, this function will be called every throttle_process_secs (default to 5s). If you have a loose logic, (e.g. increase position if RSI of the last candle is below 30), your bot will do extra re-entry every 5 secs until you either it run out of money, hit the max_position_adjustment limit, or a new candle with RSI more than 30 arrived.
Same thing also can happen with partial exit. So be sure to have a strict logic and/or check for the last filled order and if an order is already open.
Performance with many position adjustments
Position adjustments can be a good approach to increase a strategy's output - but it can also have drawbacks if using this feature extensively. Each of the orders will be attached to the trade object for the duration of the trade - hence increasing memory usage. Trades with long duration and 10s or even 100ds of position adjustments are therefore not recommended, and should be closed at regular intervals to not affect performance.
Backtesting
During backtesting this callback is called for each candle in timeframe or timeframe_detail, so run-time performance will be affected. This can also cause deviating results between live and backtesting, since backtesting can adjust the trade only once per candle, whereas live could adjust the trade multiple times per candle.
The strategy is expected to return a positive stake_amount (in stake currency) between min_stake and max_stake if and when an additional entry order should be made (position is increased -> buy order for long trades, sell order for short trades).
If there are not enough funds in the wallet (the return value is above max_stake) then the signal will be ignored. max_entry_position_adjustment property is used to limit the number of additional entries per trade (on top of the first entry order) that the bot can execute. By default, the value is -1 which means the bot have no limit on number of adjustment entries.
Additional entries are ignored once you have reached the maximum amount of extra entries that you have set on max_entry_position_adjustment, but the callback is called anyway looking for partial exits.
About stake size
Using fixed stake size means it will be the amount used for the first order, just like without position adjustment. If you wish to buy additional orders with DCA, then make sure to leave enough funds in the wallet for that. Using \"unlimited\" stake amount with DCA orders requires you to also implement the custom_stake_amount() callback to avoid allocating all funds to the initial order.
The strategy is expected to return a negative stake_amount (in stake currency) for a partial exit. Returning the full owned stake at that point (-trade.stake_amount) results in a full exit. Returning a value more than the above (so remaining stake_amount would become negative) will result in the bot ignoring the signal.
For a partial exit, it's important to know that the formula used to calculate the amount of the coin for the partial exit order is amount to be exited partially = negative_stake_amount * trade.amount / trade.stake_amount, where negative_stake_amount is the value returned from the adjust_trade_position function. As seen in the formula, the formula doesn't care about current profit/loss of the position. It only cares about trade.amount and trade.stake_amount which aren't affected by the price movement at all.
For example, let's say you buy 2 SHITCOIN/USDT at open rate of 50, which means the trade's stake amount is 100 USDT. Now the price raises to 200 and you want to sell half of it. In that case, you have to return -50% of trade.stake_amount (0.5 * 100 USDT) which equals to -50. The bot will calculate the amount it needed to sell, which is 50 * 2 / 100 which equals 1 SHITCOIN/USDT. If you return -200 (50% of 2 * 200), the bot will ignore it since trade.stake_amount is only 100 USDT but you asked to sell 200 USDT which means you are asking to sell 4 SHITCOIN/USDT.
Back to the example above, since current rate is 200, the current USDT value of your trade is now 400 USDT. Let's say you want to partially sell 100 USDT to take out the initial investment and leave the profit in the trade hoping that the price keeps rising. In that case, you have to do a different approach. First, you need to calculate the exact amount you needed to sell. In this case, since you want to sell 100 USDT worth based of current rate, the exact amount you need to partially sell is 100 * 2 / 400 which equals 0.5 SHITCOIN/USDT. Since we know now the exact amount we want to sell (0.5), the value you need to return in the adjust_trade_position function is -amount to be exited partially * trade.stake_amount / trade.amount, which equals -25. The bot will sell 0.5 SHITCOIN/USDT, keeping 1.5 in trade. You will receive 100 USDT from the partial exit.
Stoploss calculation
Stoploss is still calculated from the initial opening price, not averaged price. Regular stoploss rules still apply (cannot move down).
While /stopentry command stops the bot from entering new trades, the position adjustment feature will continue buying new orders on existing trades.
# Default imports\n\nclass DigDeeperStrategy(IStrategy):\n\n position_adjustment_enable = True\n\n # Attempts to handle large drops with DCA. High stoploss is required.\n stoploss = -0.30\n\n # ... populate_* methods\n\n # Example specific variables\n max_entry_position_adjustment = 3\n # This number is explained a bit further down\n max_dca_multiplier = 5.5\n\n # This is called when placing the initial order (opening trade)\n def custom_stake_amount(self, pair: str, current_time: datetime, current_rate: float,\n proposed_stake: float, min_stake: float | None, max_stake: float,\n leverage: float, entry_tag: str | None, side: str,\n **kwargs) -> float:\n\n # We need to leave most of the funds for possible further DCA orders\n # This also applies to fixed stakes\n return proposed_stake / self.max_dca_multiplier\n\n def adjust_trade_position(self, trade: Trade, current_time: datetime,\n current_rate: float, current_profit: float,\n min_stake: float | None, max_stake: float,\n current_entry_rate: float, current_exit_rate: float,\n current_entry_profit: float, current_exit_profit: float,\n **kwargs\n ) -> float | None | tuple[float | None, str | None]:\n \"\"\"\n Custom trade adjustment logic, returning the stake amount that a trade should be\n increased or decreased.\n This means extra entry or exit orders with additional fees.\n Only called when `position_adjustment_enable` is set to True.\n\n For full documentation please go to https://www.freqtrade.io/en/latest/strategy-advanced/\n\n When not implemented by a strategy, returns None\n\n :param trade: trade object.\n :param current_time: datetime object, containing the current datetime\n :param current_rate: Current entry rate (same as current_entry_profit)\n :param current_profit: Current profit (as ratio), calculated based on current_rate \n (same as current_entry_profit).\n :param min_stake: Minimal stake size allowed by exchange (for both entries and exits)\n :param max_stake: Maximum stake allowed (either through balance, or by exchange limits).\n :param current_entry_rate: Current rate using entry pricing.\n :param current_exit_rate: Current rate using exit pricing.\n :param current_entry_profit: Current profit using entry pricing.\n :param current_exit_profit: Current profit using exit pricing.\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n :return float: Stake amount to adjust your trade,\n Positive values to increase position, Negative values to decrease position.\n Return None for no action.\n Optionally, return a tuple with a 2nd element with an order reason\n \"\"\"\n if trade.has_open_orders:\n # Only act if no orders are open\n return\n\n if current_profit > 0.05 and trade.nr_of_successful_exits == 0:\n # Take half of the profit at +5%\n return -(trade.stake_amount / 2), \"half_profit_5%\"\n\n if current_profit > -0.05:\n return None\n\n # Obtain pair dataframe (just to show how to access it)\n dataframe, _ = self.dp.get_analyzed_dataframe(trade.pair, self.timeframe)\n # Only buy when not actively falling price.\n last_candle = dataframe.iloc[-1].squeeze()\n previous_candle = dataframe.iloc[-2].squeeze()\n if last_candle[\"close\"] < previous_candle[\"close\"]:\n return None\n\n filled_entries = trade.select_filled_orders(trade.entry_side)\n count_of_entries = trade.nr_of_successful_entries\n # Allow up to 3 additional increasingly larger buys (4 in total)\n # Initial buy is 1x\n # If that falls to -5% profit, we buy 1.25x more, average profit should increase to roughly -2.2%\n # If that falls down to -5% again, we buy 1.5x more\n # If that falls once again down to -5%, we buy 1.75x more\n # Total stake for this trade would be 1 + 1.25 + 1.5 + 1.75 = 5.5x of the initial allowed stake.\n # That is why max_dca_multiplier is 5.5\n # Hope you have a deep wallet!\n try:\n # This returns first order stake size\n stake_amount = filled_entries[0].stake_amount_filled\n # This then calculates current safety order size\n stake_amount = stake_amount * (1 + (count_of_entries * 0.25))\n return stake_amount, \"1/3rd_increase\"\n except Exception as exception:\n return None\n\n return None\nThis example assumes 0 fees for simplicity, and a long position on an imaginary coin.
The total profit for this trade was 950$ on a 3350$ investment (100@8$ + 100@9$ + 150@11$). As such - the final relative profit is 28.35% (950 / 3350).
The adjust_order_price() callback may be used by strategy developer to refresh/replace limit orders upon arrival of new candles. This callback is called once every iteration unless the order has been (re)placed within the current candle - limiting the maximum (re)placement of each order to once per candle. This also means that the first call will be at the start of the next candle after the initial order was placed.
Be aware that custom_entry_price()/custom_exit_price() is still the one dictating initial limit order price target at the time of the signal.
Orders can be cancelled out of this callback by returning None.
Returning current_order_rate will keep the order on the exchange \"as is\". Returning any other price will cancel the existing order, and replace it with a new order.
If the cancellation of the original order fails, then the order will not be replaced - though the order will most likely have been canceled on exchange. Having this happen on initial entries will result in the deletion of the order, while on position adjustment orders, it'll result in the trade size remaining as is. If the order has been partially filled, the order will not be replaced. You can however use adjust_trade_position() to adjust the trade size to the expected position size, should this be necessary / desired.
Regular timeout
Entry unfilledtimeout mechanism (as well as check_entry_timeout()/check_exit_timeout()) takes precedence over this callback. Orders that are cancelled via the above methods will not have this callback called. Be sure to update timeout values to match your expectations.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n\n # ... populate_* methods\n\n def adjust_order_price(\n self,\n trade: Trade,\n order: Order | None,\n pair: str,\n current_time: datetime,\n proposed_rate: float,\n current_order_rate: float,\n entry_tag: str | None,\n side: str,\n is_entry: bool,\n **kwargs,\n ) -> float | None:\n \"\"\"\n Exit and entry order price re-adjustment logic, returning the user desired limit price.\n This only executes when a order was already placed, still open (unfilled fully or partially)\n and not timed out on subsequent candles after entry trigger.\n\n For full documentation please go to https://www.freqtrade.io/en/latest/strategy-callbacks/\n\n When not implemented by a strategy, returns current_order_rate as default.\n If current_order_rate is returned then the existing order is maintained.\n If None is returned then order gets canceled but not replaced by a new one.\n\n :param pair: Pair that's currently analyzed\n :param trade: Trade object.\n :param order: Order object\n :param current_time: datetime object, containing the current datetime\n :param proposed_rate: Rate, calculated based on pricing settings in entry_pricing.\n :param current_order_rate: Rate of the existing order in place.\n :param entry_tag: Optional entry_tag (buy_tag) if provided with the buy signal.\n :param side: 'long' or 'short' - indicating the direction of the proposed trade\n :param is_entry: True if the order is an entry order, False if it's an exit order.\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n :return float or None: New entry price value if provided\n \"\"\"\n\n # Limit entry orders to use and follow SMA200 as price target for the first 10 minutes since entry trigger for BTC/USDT pair.\n if (\n is_entry\n and pair == \"BTC/USDT\" \n and entry_tag == \"long_sma200\" \n and side == \"long\" \n and (current_time - timedelta(minutes=10)) <= trade.open_date_utc\n ):\n # just cancel the order if it has been filled more than half of the amount\n if order.filled > order.remaining:\n return None\n else:\n dataframe, _ = self.dp.get_analyzed_dataframe(pair=pair, timeframe=self.timeframe)\n current_candle = dataframe.iloc[-1].squeeze()\n # desired price\n return current_candle[\"sma_200\"]\n # default: maintain existing order\n return current_order_rate\nIncompatibility with adjust_*_price()
If you have both adjust_order_price() and adjust_entry_price()/adjust_exit_price() implemented, only adjust_order_price() will be used. If you need to adjust entry/exit prices, you can either implement the logic in adjust_order_price(), or use the split adjust_entry_price() / adjust_exit_price() callbacks, but not both. Mixing these is not supported and will raise an error during bot startup.
The adjust_entry_price() callback may be used by strategy developer to refresh/replace entry limit orders upon arrival. It's a sub-set of adjust_order_price() and is called only for entry orders. All remaining behavior is identical to adjust_order_price().
The trade open-date (trade.open_date_utc) will remain at the time of the very first order placed. Please make sure to be aware of this - and eventually adjust your logic in other callbacks to account for this, and use the date of the first filled order instead.
The adjust_exit_price() callback may be used by strategy developer to refresh/replace exit limit orders upon arrival. It's a sub-set of adjust_order_price() and is called only for exit orders. All remaining behavior is identical to adjust_order_price().
When trading in markets that allow leverage, this method must return the desired Leverage (Defaults to 1 -> No leverage).
Assuming a capital of 500USDT, a trade with leverage=3 would result in a position with 500 x 3 = 1500 USDT.
Values that are above max_leverage will be adjusted to max_leverage. For markets / exchanges that don't support leverage, this method is ignored.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n def leverage(self, pair: str, current_time: datetime, current_rate: float,\n proposed_leverage: float, max_leverage: float, entry_tag: str | None, side: str,\n **kwargs) -> float:\n \"\"\"\n Customize leverage for each new trade. This method is only called in futures mode.\n\n :param pair: Pair that's currently analyzed\n :param current_time: datetime object, containing the current datetime\n :param current_rate: Rate, calculated based on pricing settings in exit_pricing.\n :param proposed_leverage: A leverage proposed by the bot.\n :param max_leverage: Max leverage allowed on this pair\n :param entry_tag: Optional entry_tag (buy_tag) if provided with the buy signal.\n :param side: \"long\" or \"short\" - indicating the direction of the proposed trade\n :return: A leverage amount, which is between 1.0 and max_leverage.\n \"\"\"\n return 1.0\nAll profit calculations include leverage. Stoploss / ROI also include leverage in their calculation. Defining a stoploss of 10% at 10x leverage would trigger the stoploss with a 1% move to the downside.
"},{"location":"strategy-callbacks/#order-filled-callback","title":"Order filled Callback","text":"The order_filled() callback may be used to perform specific actions based on the current trade state after an order is filled. It will be called independent of the order type (entry, exit, stoploss or position adjustment).
Assuming that your strategy needs to store the high value of the candle at trade entry, this is possible with this callback as the following example show.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n def order_filled(self, pair: str, trade: Trade, order: Order, current_time: datetime, **kwargs) -> None:\n \"\"\"\n Called right after an order fills. \n Will be called for all order types (entry, exit, stoploss, position adjustment).\n :param pair: Pair for trade\n :param trade: trade object.\n :param order: Order object.\n :param current_time: datetime object, containing the current datetime\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n \"\"\"\n # Obtain pair dataframe (just to show how to access it)\n dataframe, _ = self.dp.get_analyzed_dataframe(trade.pair, self.timeframe)\n last_candle = dataframe.iloc[-1].squeeze()\n\n if (trade.nr_of_successful_entries == 1) and (order.ft_order_side == trade.entry_side):\n trade.set_custom_data(key=\"entry_candle_high\", value=last_candle[\"high\"])\n\n return None\nLearn more about storing data
You can learn more about storing data on the Storing custom trade data section. Please keep in mind that this is considered advanced usage, and should be used with care.
"},{"location":"strategy-callbacks/#plot-annotations-callback","title":"Plot annotations callback","text":"The plot annotations callback is called whenever freqUI requests data to display a chart. This callback has no meaning in the trade cycle context and is only used for charting purposes.
The strategy can then return a list of AnnotationType objects to be displayed on the chart. Depending on the content returned - the chart can display horizontal areas, vertical areas, or boxes.
The full object looks like this:
{\n \"type\": \"area\", // Type of the annotation, currently only \"area\" is supported\n \"start\": \"2024-01-01 15:00:00\", // Start date of the area\n \"end\": \"2024-01-01 16:00:00\", // End date of the area\n \"y_start\": 94000.2, // Price / y axis value\n \"y_end\": 98000, // Price / y axis value\n \"color\": \"\",\n \"z_level\": 5, // z-level, higher values are drawn on top of lower values. Positions relative to the Chart elements need to be set in freqUI.\n \"label\": \"some label\"\n}\nThe below example will mark the chart with areas for the hours 8 and 15, with a grey color, highlighting the market open and close hours. This is obviously a very basic example.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n def plot_annotations(\n self, pair: str, start_date: datetime, end_date: datetime, dataframe: DataFrame, **kwargs\n ) -> list[AnnotationType]:\n \"\"\"\n Retrieve area annotations for a chart.\n Must be returned as array, with type, label, color, start, end, y_start, y_end.\n All settings except for type are optional - though it usually makes sense to include either\n \"start and end\" or \"y_start and y_end\" for either horizontal or vertical plots\n (or all 4 for boxes).\n :param pair: Pair that's currently analyzed\n :param start_date: Start date of the chart data being requested\n :param end_date: End date of the chart data being requested\n :param dataframe: DataFrame with the analyzed data for the chart\n :param **kwargs: Ensure to keep this here so updates to this won't break your strategy.\n :return: List of AnnotationType objects\n \"\"\"\n annotations = []\n while start_dt < end_date:\n start_dt += timedelta(hours=1)\n if start_dt.hour in (8, 15):\n annotations.append(\n {\n \"type\": \"area\",\n \"label\": \"Trade open and close hours\",\n \"start\": start_dt,\n \"end\": start_dt + timedelta(hours=1),\n # Omitting y_start and y_end will result in a vertical area spanning the whole height of the main Chart\n \"color\": \"rgba(133, 133, 133, 0.4)\",\n }\n )\n\n return annotations\nEntries will be validated, and won't be passed to the UI if they don't correspond to the expected schema and will log an error if they don't.
Many annotations
Using too many annotations can cause the UI to hang, especially when plotting large amounts of historic data. Use the annotation feature with care.
"},{"location":"strategy-callbacks/#plot-annotations-example","title":"Plot annotations example","text":"Code used for the plot aboveThis is an example code and should be treated as such.
# Default imports\n\nclass AwesomeStrategy(IStrategy):\n def plot_annotations(\n self, pair: str, start_date: datetime, end_date: datetime, dataframe: DataFrame, **kwargs\n ) -> list[AnnotationType]:\n annotations = []\n while start_dt < end_date:\n start_dt += timedelta(hours=1)\n if (start_dt.hour % 4) == 0:\n mark_areas.append(\n {\n \"type\": \"area\",\n \"label\": \"4h\",\n \"start\": start_dt,\n \"end\": start_dt + timedelta(hours=1),\n \"color\": \"rgba(133, 133, 133, 0.4)\",\n }\n )\n elif (start_dt.hour % 2) == 0:\n price = dataframe.loc[dataframe[\"date\"] == start_dt, [\"close\"]].mean()\n mark_areas.append(\n {\n \"type\": \"area\",\n \"label\": \"2h\",\n \"start\": start_dt,\n \"end\": start_dt + timedelta(hours=1),\n \"y_end\": price * 1.01,\n \"y_start\": price * 0.99,\n \"color\": \"rgba(0, 255, 0, 0.4)\",\n \"z_level\": 5,\n }\n )\n\n return annotations\nThis page explains how to customize your strategies, add new indicators and set up trading rules.
If you haven't already, please familiarize yourself with:
The bot includes a default strategy file.
Also, several other strategies are available in the strategy repository.
You will however most likely have your own idea for a strategy.
This document intends to help you convert your ideas into a working strategy.
"},{"location":"strategy-customization/#generating-a-strategy-template","title":"Generating a strategy template","text":"To get started, you can use the command:
freqtrade new-strategy --strategy AwesomeStrategy\nThis will create a new strategy called AwesomeStrategy from a template, which will be located using the filename user_data/strategies/AwesomeStrategy.py.
Note
There is a difference between the name of the strategy and the filename. In most commands, Freqtrade uses the name of the strategy, not the filename.
Note
The new-strategy command generates starting examples which will not be profitable out of the box.
freqtrade new-strategy has an additional parameter, --template, which controls the amount of pre-build information you get in the created strategy. Use --template minimal to get an empty strategy without any indicator examples, or --template advanced to get a template with more complicated features defined.
A strategy file contains all the information needed to build the strategy logic:
The bot includes a sample strategy called SampleStrategy that you can use as a basis: user_data/strategies/sample_strategy.py. You can test it with the parameter: --strategy SampleStrategy. Remember that you use the strategy class name, not the filename.
Additionally, there is an attribute called INTERFACE_VERSION, which defines the version of the strategy interface the bot should use. The current version is 3 - which is also the default when it's not set explicitly in the strategy.
You may see older strategies set to interface version 2, and these will need to be updated to v3 terminology as future versions will require this to be set.
Starting the bot in dry or live mode is accomplished using the trade command:
freqtrade trade --strategy AwesomeStrategy\nFreqtrade strategies can be processed by the Freqtrade bot in 5 main modes:
Check the configuration documentation about how to set the bot to dry or live mode.
Always use dry mode when testing as this gives you an idea of how your strategy will work in reality without risking capital.
"},{"location":"strategy-customization/#diving-in-deeper","title":"Diving in deeper","text":"For the following section we will use the user_data/strategies/sample_strategy.py file as reference.
Strategies and Backtesting
To avoid problems and unexpected differences between backtesting and dry/live modes, please be aware that during backtesting the full time range is passed to the populate_*() methods at once. It is therefore best to use vectorized operations (across the whole dataframe, not loops) and avoid index referencing (df.iloc[-1]), but instead use df.shift() to get to the previous candle.
Warning: Using future data
Since backtesting passes the full time range to the populate_*() methods, the strategy author needs to take care to avoid having the strategy utilize data from the future. Some common patterns for this are listed in the Common Mistakes section of this document.
Freqtrade includes two helpful commands to help assess common lookahead (using future data) and recursive bias (variance in indicator values) issues. Before running a strategy in dry or live more, you should always use these commands first. Please check the relevant documentation for lookahead and recursive analysis.
"},{"location":"strategy-customization/#dataframe","title":"Dataframe","text":"Freqtrade uses pandas to store/provide the candlestick (OHLCV) data. Pandas is a great library developed for processing large amounts of data in tabular format.
Each row in a dataframe corresponds to one candle on a chart, with the latest complete candle always being the last in the dataframe (sorted by date).
If we were to look at the first few rows of the main dataframe using the pandas head() function, we would see:
> dataframe.head()\n date open high low close volume\n0 2021-11-09 23:25:00+00:00 67279.67 67321.84 67255.01 67300.97 44.62253\n1 2021-11-09 23:30:00+00:00 67300.97 67301.34 67183.03 67187.01 61.38076\n2 2021-11-09 23:35:00+00:00 67187.02 67187.02 67031.93 67123.81 113.42728\n3 2021-11-09 23:40:00+00:00 67123.80 67222.40 67080.33 67160.48 78.96008\n4 2021-11-09 23:45:00+00:00 67160.48 67160.48 66901.26 66943.37 111.39292\nA dataframe is a table where columns are not single values, but a series of data values. As such, simple python comparisons like the following will not work:
if dataframe['rsi'] > 30:\n dataframe['enter_long'] = 1\nThe above section will fail with The truth value of a Series is ambiguous [...].
This must instead be written in a pandas-compatible way, so the operation is performed across the whole dataframe, i.e. vectorisation.
dataframe.loc[\n (dataframe['rsi'] > 30)\n , 'enter_long'] = 1\nWith this section, you have a new column in your dataframe, which has 1 assigned whenever RSI is above 30.
Freqtrade uses this new column as an entry signal, where it is assumed that a trade will subsequently open on the next open candle.
Pandas provides fast ways to calculate metrics, i.e. \"vectorisation\". To benefit from this speed, it is advised to not use loops, but use vectorized methods instead.
Vectorized operations perform calculations across the whole range of data and are therefore, compared to looping through each row, a lot faster when calculating indicators.
Signals vs TradesTrade order assumptions
In backtesting, signals are generated on candle close. Trades are then initiated immeditely on next candle open.
In dry and live, this may be delayed due to all pair dataframes needing to be analysed first, then trade processing for each of those pairs happens. This means that in dry/live you need to be mindful of having as low a computation delay as possible, usually by running a low number of pairs and having a CPU with a good clock speed.
"},{"location":"strategy-customization/#why-cant-i-see-real-time-candle-data","title":"Why can't I see \"real time\" candle data?","text":"Freqtrade does not store incomplete/unfinished candles in the dataframe.
The use of incomplete data for making strategy decisions is called \"repainting\" and you might see other platforms allow this.
Freqtrade does not. Only complete/finished candle data is available in the dataframe.
"},{"location":"strategy-customization/#customize-indicators","title":"Customize Indicators","text":"Entry and exit signals need indicators. You can add more indicators by extending the list contained in the method populate_indicators() from your strategy file.
You should only add the indicators used in either populate_entry_trend(), populate_exit_trend(), or to populate another indicator, otherwise performance may suffer.
It's important to always return the dataframe from these three functions without removing/modifying the columns \"open\", \"high\", \"low\", \"close\", \"volume\", otherwise these fields would contain something unexpected.
Sample:
def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Adds several different TA indicators to the given DataFrame\n\n Performance Note: For the best performance be frugal on the number of indicators\n you are using. Let uncomment only the indicator you are using in your strategies\n or your hyperopt configuration, otherwise you will waste your memory and CPU usage.\n :param dataframe: Dataframe with data from the exchange\n :param metadata: Additional information, like the currently traded pair\n :return: a Dataframe with all mandatory indicators for the strategies\n \"\"\"\n dataframe['sar'] = ta.SAR(dataframe)\n dataframe['adx'] = ta.ADX(dataframe)\n stoch = ta.STOCHF(dataframe)\n dataframe['fastd'] = stoch['fastd']\n dataframe['fastk'] = stoch['fastk']\n dataframe['bb_lower'] = ta.BBANDS(dataframe, nbdevup=2, nbdevdn=2)['lowerband']\n dataframe['sma'] = ta.SMA(dataframe, timeperiod=40)\n dataframe['tema'] = ta.TEMA(dataframe, timeperiod=9)\n dataframe['mfi'] = ta.MFI(dataframe)\n dataframe['rsi'] = ta.RSI(dataframe)\n dataframe['ema5'] = ta.EMA(dataframe, timeperiod=5)\n dataframe['ema10'] = ta.EMA(dataframe, timeperiod=10)\n dataframe['ema50'] = ta.EMA(dataframe, timeperiod=50)\n dataframe['ema100'] = ta.EMA(dataframe, timeperiod=100)\n dataframe['ao'] = awesome_oscillator(dataframe)\n macd = ta.MACD(dataframe)\n dataframe['macd'] = macd['macd']\n dataframe['macdsignal'] = macd['macdsignal']\n dataframe['macdhist'] = macd['macdhist']\n hilbert = ta.HT_SINE(dataframe)\n dataframe['htsine'] = hilbert['sine']\n dataframe['htleadsine'] = hilbert['leadsine']\n dataframe['plus_dm'] = ta.PLUS_DM(dataframe)\n dataframe['plus_di'] = ta.PLUS_DI(dataframe)\n dataframe['minus_dm'] = ta.MINUS_DM(dataframe)\n dataframe['minus_di'] = ta.MINUS_DI(dataframe)\n\n # remember to always return the dataframe\n return dataframe\nWant more indicator examples?
Look into the user_data/strategies/sample_strategy.py. Then uncomment indicators you need.
"},{"location":"strategy-customization/#indicator-libraries","title":"Indicator libraries","text":"Out of the box, freqtrade installs the following technical libraries:
Additional technical libraries can be installed as necessary, or custom indicators may be written / invented by the strategy author.
"},{"location":"strategy-customization/#strategy-startup-period","title":"Strategy startup period","text":"Some indicators have an unstable startup period in which there isn't enough candle data to calculate any values (NaN), or the calculation is incorrect. This can lead to inconsistencies, since Freqtrade does not know how long this unstable period is and uses whatever indicator values are in the dataframe.
To account for this, the strategy can be assigned the startup_candle_count attribute.
This should be set to the maximum number of candles that the strategy requires to calculate stable indicators. In the case where a user includes higher timeframes with informative pairs, the startup_candle_count does not necessarily change. The value is the maximum period (in candles) that any of the informatives timeframes need to compute stable indicators.
You can use recursive-analysis to check and find the correct startup_candle_count to be used. When recursive analysis shows a variance of 0%, then you can be sure that you have enough startup candle data.
In this example strategy, this should be set to 400 (startup_candle_count = 400), since the minimum needed history for ema100 calculation to make sure the value is correct is 400 candles.
dataframe['ema100'] = ta.EMA(dataframe, timeperiod=100)\nBy letting the bot know how much history is needed, backtest trades can start at the specified timerange during backtesting and hyperopt.
Using x calls to get OHLCV
If you receive a warning like WARNING - Using 3 calls to get OHLCV. This can result in slower operations for the bot. Please check if you really need 1500 candles for your strategy - you should consider if you really need this much historic data for your signals. Having this will cause Freqtrade to make multiple calls for the same pair, which will obviously be slower than one network request. As a consequence, Freqtrade will take longer to refresh candles - and should therefore be avoided if possible. This is capped to 5 total calls to avoid overloading the exchange, or make freqtrade too slow.
Warning
startup_candle_count should be below ohlcv_candle_limit * 5 (which is 500 * 5 for most exchanges) - since only this amount of candles will be available during Dry-Run/Live Trade operations.
Let's try to backtest 1 month (January 2019) of 5m candles using an example strategy with EMA100, as above.
freqtrade backtesting --timerange 20190101-20190201 --timeframe 5m\nAssuming startup_candle_count is set to 400, backtesting knows it needs 400 candles to generate valid entry signals. It will load data from 20190101 - (400 * 5m) - which is ~2018-12-30 11:40:00.
If this data is available, indicators will be calculated with this extended timerange. The unstable startup period (up to 2019-01-01 00:00:00) will then be removed before backtesting is carried out.
Unavailable startup candle data
If data for the startup period is not available, then the timerange will be adjusted to account for this startup period. In our example, backtesting would then start from 2019-01-02 09:20:00.
"},{"location":"strategy-customization/#entry-signal-rules","title":"Entry signal rules","text":"Edit the method populate_entry_trend() in your strategy file to update your entry strategy.
It's important to always return the dataframe without removing/modifying the columns \"open\", \"high\", \"low\", \"close\", \"volume\", otherwise these fields would contain something unexpected. The strategy may then produce invalid values, or cease to work entirely.
This method will also define a new column, \"enter_long\" (\"enter_short\" for shorts), which needs to contain 1 for entries, and 0 for \"no action\". enter_long is a mandatory column that must be set even if the strategy is shorting only.
You can name your entry signals by using the \"enter_tag\" column, which can help debug and assess your strategy later.
Sample from user_data/strategies/sample_strategy.py:
def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Based on TA indicators, populates the buy signal for the given dataframe\n :param dataframe: DataFrame populated with indicators\n :param metadata: Additional information, like the currently traded pair\n :return: DataFrame with buy column\n \"\"\"\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 30)) & # Signal: RSI crosses above 30\n (dataframe['tema'] <= dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] > dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['enter_long', 'enter_tag']] = (1, 'rsi_cross')\n\n return dataframe\nShort entries can be created by setting enter_short (corresponds to enter_long for long trades). The enter_tag column remains identical. Shorting needs to be supported by your exchange and market configuration! Also, make sure you set can_short appropriately on your strategy if you intend to short.
# allow both long and short trades\ncan_short = True\n\ndef populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 30)) & # Signal: RSI crosses above 30\n (dataframe['tema'] <= dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] > dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['enter_long', 'enter_tag']] = (1, 'rsi_cross')\n\n dataframe.loc[\n (\n (qtpylib.crossed_below(dataframe['rsi'], 70)) & # Signal: RSI crosses below 70\n (dataframe['tema'] > dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] < dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['enter_short', 'enter_tag']] = (1, 'rsi_cross')\n\n return dataframe\nNote
Buying requires sellers to buy from. Therefore volume needs to be > 0 (dataframe['volume'] > 0) to make sure that the bot does not buy/sell in no-activity periods.
Edit the method populate_exit_trend() into your strategy file to update your exit strategy.
The exit-signal can be suppressed by setting use_exit_signal to false in the configuration or strategy.
use_exit_signal will not influence signal collision rules - which will still apply and can prevent entries.
It's important to always return the dataframe without removing/modifying the columns \"open\", \"high\", \"low\", \"close\", \"volume\", otherwise these fields would contain something unexpected. The strategy may then produce invalid values, or cease to work entirely.
This method will also define a new column, \"exit_long\" (\"exit_short\" for shorts), which needs to contain 1 for exits, and 0 for \"no action\".
You can name your exit signals by using the \"exit_tag\" column, which can help debug and assess your strategy later.
Sample from user_data/strategies/sample_strategy.py:
def populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n \"\"\"\n Based on TA indicators, populates the exit signal for the given dataframe\n :param dataframe: DataFrame populated with indicators\n :param metadata: Additional information, like the currently traded pair\n :return: DataFrame with buy column\n \"\"\"\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 70)) & # Signal: RSI crosses above 70\n (dataframe['tema'] > dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] < dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['exit_long', 'exit_tag']] = (1, 'rsi_too_high')\n return dataframe\nShort exits can be created by setting exit_short (corresponds to exit_long). The exit_tag column remains identical. Shorting needs to be supported by your exchange and market configuration! Also, make sure you set can_short appropriately on your strategy if you intend to short.
# allow both long and short trades\ncan_short = True\n\ndef populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 70)) & # Signal: RSI crosses above 70\n (dataframe['tema'] > dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] < dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['exit_long', 'exit_tag']] = (1, 'rsi_too_high')\n dataframe.loc[\n (\n (qtpylib.crossed_below(dataframe['rsi'], 30)) & # Signal: RSI crosses below 30\n (dataframe['tema'] < dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] > dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['exit_short', 'exit_tag']] = (1, 'rsi_too_low')\n return dataframe\nThe minimal_roi strategy variable defines the minimal Return On Investment (ROI) a trade should reach before exiting, independent from the exit signal.
It is of the following format, i.e. a python dict, with the dict key (left side of the colon) being the minutes passed since the trade opened, and the value (right side of the colon) being the percentage.
minimal_roi = {\n \"40\": 0.0,\n \"30\": 0.01,\n \"20\": 0.02,\n \"0\": 0.04\n}\nThe above configuration would therefore mean:
The calculation does include fees.
"},{"location":"strategy-customization/#disabling-minimal-roi","title":"Disabling minimal ROI","text":"To disable ROI completely, set it to an empty dictionary:
minimal_roi = {}\nTo use times based on candle duration (timeframe), the following snippet can be handy.
This will allow you to change the timeframe for the strategy, but the minimal ROI times will still be set as candles, e.g. after 3 candles.
from freqtrade.exchange import timeframe_to_minutes\n\nclass AwesomeStrategy(IStrategy):\n\n timeframe = \"1d\"\n timeframe_mins = timeframe_to_minutes(timeframe)\n minimal_roi = {\n \"0\": 0.05, # 5% for the first 3 candles\n str(timeframe_mins * 3): 0.02, # 2% after 3 candles\n str(timeframe_mins * 6): 0.01, # 1% After 6 candles\n }\nminimal_roi will take the trade.open_date as reference, which is the time the trade was initialized, i.e. when the first order for this trade was placed. This will also hold true for limit orders that don't fill immediately (usually in combination with \"off-spot\" prices through custom_entry_price()), as well as for cases where the initial order price is replaced through adjust_entry_price(). The time used will still be from the initial trade.open_date (when the initial order was first placed), not from the newly placed or adjusted order date.
Setting a stoploss is highly recommended to protect your capital from strong moves against you.
Sample of setting a 10% stoploss:
stoploss = -0.10\nFor the full documentation on stoploss features, look at the dedicated stoploss page.
"},{"location":"strategy-customization/#timeframe","title":"Timeframe","text":"This is the periodicity of candles the bot should use in the strategy.
Common values are \"1m\", \"5m\", \"15m\", \"1h\", however all values supported by your exchange should work.
Please note that the same entry/exit signals may work well with one timeframe, but not with others.
This setting is accessible within the strategy methods as the self.timeframe attribute.
To use short signals in futures markets, you will have to set can_short = True.
Strategies which enable this will fail to load on spot markets.
If you have 1 values in the enter_short column to raise short signals, setting can_short = False (which is the default) will mean that these short signals are ignored, even if you have specified futures markets in your configuration.
The metadata dict (available for populate_entry_trend, populate_exit_trend, populate_indicators) contains additional information. Currently this is pair, which can be accessed using metadata['pair'], and will return a pair in the format XRP/BTC (or XRP/BTC:BTC for futures markets).
The metadata dict should not be modified and does not persist information across multiple functions in your strategy.
Instead, please check the Storing information section.
"},{"location":"strategy-customization/#imports-necessary-for-a-strategy","title":"Imports necessary for a strategy","text":"When creating a strategy, you will need to import the necessary modules and classes. The following imports are required for a strategy:
By default, we recommend the following imports as a base line for your strategy: This will cover all imports necessary for freqtrade functions to work. Obviously you can add more imports as needed for your strategy.
# flake8: noqa: F401\n# isort: skip_file\n# --- Do not remove these imports ---\nimport numpy as np\nimport pandas as pd\nfrom datetime import datetime, timedelta, timezone\nfrom pandas import DataFrame\nfrom typing import Dict, Optional, Union, Tuple\n\nfrom freqtrade.strategy import (\n IStrategy,\n Trade, \n Order,\n PairLocks,\n informative, # @informative decorator\n # Hyperopt Parameters\n BooleanParameter,\n CategoricalParameter,\n DecimalParameter,\n IntParameter,\n RealParameter,\n # timeframe helpers\n timeframe_to_minutes,\n timeframe_to_next_date,\n timeframe_to_prev_date,\n # Strategy helper functions\n merge_informative_pair,\n stoploss_from_absolute,\n stoploss_from_open,\n)\n\n# --------------------------------\n# Add your lib to import here\nimport talib.abstract as ta\nfrom technical import qtpylib\nBy default, freqtrade will attempt to load strategies from all .py files within the userdir (default user_data/strategies).
Assuming your strategy is called AwesomeStrategy, stored in the file user_data/strategies/AwesomeStrategy.py, then you can start freqtrade in dry (or live, depending on your configuration) mode with:
freqtrade trade --strategy AwesomeStrategy\nNote that we're using the class name, not the file name.
You can use freqtrade list-strategies to see a list of all strategies Freqtrade is able to load (all strategies in the correct folder). It will also include a \"status\" field, highlighting potential problems.
You can use a different directory by using --strategy-path user_data/otherPath. This parameter is available to all commands that require a strategy.
Data for additional, informative pairs (reference pairs) can be beneficial for some strategies to see data on a wider timeframe.
OHLCV data for these pairs will be downloaded as part of the regular whitelist refresh process and is available via DataProvider just as other pairs (see below).
These pairs will not be traded unless they are also specified in the pair whitelist, or have been selected by Dynamic Whitelisting, e.g. VolumePairlist.
The pairs need to be specified as tuples in the format (\"pair\", \"timeframe\"), with pair as the first and timeframe as the second argument.
Sample:
def informative_pairs(self):\n return [(\"ETH/USDT\", \"5m\"),\n (\"BTC/TUSD\", \"15m\"),\n ]\nA full sample can be found in the DataProvider section.
Warning
As these pairs will be refreshed as part of the regular whitelist refresh, it's best to keep this list short. All timeframes and all pairs can be specified as long as they are available (and active) on the used exchange. It is however better to use resampling to longer timeframes whenever possible to avoid hammering the exchange with too many requests and risk being blocked.
Alternative candle typesInformative_pairs can also provide a 3rd tuple element defining the candle type explicitly. Availability of alternative candle-types will depend on the trading-mode and the exchange. In general, spot pairs cannot be used in futures markets, and futures candles can't be used as informative pairs for spot bots. Details about this may vary, if they do, this can be found in the exchange documentation.
def informative_pairs(self):\n return [\n (\"ETH/USDT\", \"5m\", \"\"), # Uses default candletype, depends on trading_mode (recommended)\n (\"ETH/USDT\", \"5m\", \"spot\"), # Forces usage of spot candles (only valid for bots running on spot markets).\n (\"BTC/TUSD\", \"15m\", \"futures\"), # Uses futures candles (only bots with `trading_mode=futures`)\n (\"BTC/TUSD\", \"15m\", \"mark\"), # Uses mark candles (only bots with `trading_mode=futures`)\n ]\n@informative())","text":"To easily define informative pairs, use the @informative decorator. All decorated populate_indicators_* methods run in isolation, and do not have access to data from other informative pairs. However, all informative dataframes for each pair are merged and passed to main populate_indicators() method.
Note
Do not use the @informative decorator if you need to use data from one informative pair when generating another informative pair. Instead, define informative pairs manually as described in the DataProvider section.
When hyperopting, use of the hyperoptable parameter .value attribute is not supported. Please use the .range attribute. See optimizing an indicator parameter for more information.
def informative(\n timeframe: str,\n asset: str = \"\",\n fmt: str | Callable[[Any], str] | None = None,\n *,\n candle_type: CandleType | str | None = None,\n ffill: bool = True,\n) -> Callable[[PopulateIndicators], PopulateIndicators]:\n \"\"\"\n A decorator for populate_indicators_Nn(self, dataframe, metadata), allowing these functions to\n define informative indicators.\n\n Example usage:\n\n @informative('1h')\n def populate_indicators_1h(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)\n return dataframe\n\n :param timeframe: Informative timeframe. Must always be equal or higher than strategy timeframe.\n :param asset: Informative asset, for example BTC, BTC/USDT, ETH/BTC. Do not specify to use\n current pair. Also supports limited pair format strings (see below)\n :param fmt: Column format (str) or column formatter (callable(name, asset, timeframe)). When not\n specified, defaults to:\n * {base}_{quote}_{column}_{timeframe} if asset is specified.\n * {column}_{timeframe} if asset is not specified.\n Pair format supports these format variables:\n * {base} - base currency in lower case, for example 'eth'.\n * {BASE} - same as {base}, except in upper case.\n * {quote} - quote currency in lower case, for example 'usdt'.\n * {QUOTE} - same as {quote}, except in upper case.\n Format string additionally supports this variables.\n * {asset} - full name of the asset, for example 'BTC/USDT'.\n * {column} - name of dataframe column.\n * {timeframe} - timeframe of informative dataframe.\n :param ffill: ffill dataframe after merging informative pair.\n :param candle_type: '', mark, index, premiumIndex, or funding_rate\n \"\"\"\nMost of the time we do not need power and flexibility offered by merge_informative_pair(), therefore we can use a decorator to quickly define informative pairs.
from datetime import datetime\nfrom freqtrade.persistence import Trade\nfrom freqtrade.strategy import IStrategy, informative\n\nclass AwesomeStrategy(IStrategy):\n\n # This method is not required. \n # def informative_pairs(self): ...\n\n # Define informative upper timeframe for each pair. Decorators can be stacked on same \n # method. Available in populate_indicators as 'rsi_30m' and 'rsi_1h'.\n @informative('30m')\n @informative('1h')\n def populate_indicators_1h(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)\n return dataframe\n\n # Define BTC/STAKE informative pair. Available in populate_indicators and other methods as\n # 'btc_rsi_1h'. Current stake currency should be specified as {stake} format variable \n # instead of hard-coding actual stake currency. Available in populate_indicators and other \n # methods as 'btc_usdt_rsi_1h' (when stake currency is USDT).\n @informative('1h', 'BTC/{stake}')\n def populate_indicators_btc_1h(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)\n return dataframe\n\n # Define BTC/ETH informative pair. You must specify quote currency if it is different from\n # stake currency. Available in populate_indicators and other methods as 'eth_btc_rsi_1h'.\n @informative('1h', 'ETH/BTC')\n def populate_indicators_eth_btc_1h(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)\n return dataframe\n\n # Define BTC/STAKE informative pair. A custom formatter may be specified for formatting\n # column names. A callable `fmt(**kwargs) -> str` may be specified, to implement custom\n # formatting. Available in populate_indicators and other methods as 'rsi_upper_1h'.\n @informative('1h', 'BTC/{stake}', '{column}_{timeframe}')\n def populate_indicators_btc_1h_2(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe['rsi_upper'] = ta.RSI(dataframe, timeperiod=14)\n return dataframe\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n # Strategy timeframe indicators for current pair.\n dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)\n # Informative pairs are available in this method.\n dataframe['rsi_less'] = dataframe['rsi'] < dataframe['rsi_1h']\n return dataframe\nNote
Use string formatting when accessing informative dataframes of other pairs. This will allow easily changing stake currency in config without having to adjust strategy code.
def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n stake = self.config['stake_currency']\n dataframe.loc[\n (\n (dataframe[f'btc_{stake}_rsi_1h'] < 35)\n &\n (dataframe['volume'] > 0)\n ),\n ['enter_long', 'enter_tag']] = (1, 'buy_signal_rsi')\n\n return dataframe\nAlternatively column renaming may be used to remove stake currency from column names: @informative('1h', 'BTC/{stake}', fmt='{base}_{column}_{timeframe}').
Duplicate method names
Methods tagged with the @informative() decorator must always have unique names! Reusing the same name (for example when copy-pasting already defined informative methods) will overwrite previously defined methods and not produce any errors due to limitations of Python programming language. In such cases you will find that indicators created in methods higher up in the strategy file are not available in the dataframe. Carefully review method names and make sure they are unique!
This method helps you merge an informative pair to the regular main dataframe safely and consistently, without lookahead bias.
Options:
For a full sample, please refer to the complete data provider example below.
All columns of the informative dataframe will be available on the returning dataframe in a renamed fashion:
Column renaming
Assuming inf_tf = '1d' the resulting columns will be:
'date', 'open', 'high', 'low', 'close', 'rsi' # from the original dataframe\n'date_1d', 'open_1d', 'high_1d', 'low_1d', 'close_1d', 'rsi_1d' # from the informative dataframe\nAssuming inf_tf = '1h' the resulting columns will be:
'date', 'open', 'high', 'low', 'close', 'rsi' # from the original dataframe\n'date_1h', 'open_1h', 'high_1h', 'low_1h', 'close_1h', 'rsi_1h' # from the informative dataframe\nA custom implementation for this is possible, and can be done as follows:
# Shift date by 1 candle\n# This is necessary since the data is always the \"open date\"\n# and a 15m candle starting at 12:15 should not know the close of the 1h candle from 12:00 to 13:00\nminutes = timeframe_to_minutes(inf_tf)\n# Only do this if the timeframes are different:\ninformative['date_merge'] = informative[\"date\"] + pd.to_timedelta(minutes, 'm')\n\n# Rename columns to be unique\ninformative.columns = [f\"{col}_{inf_tf}\" for col in informative.columns]\n# Assuming inf_tf = '1d' - then the columns will now be:\n# date_1d, open_1d, high_1d, low_1d, close_1d, rsi_1d\n\n# Combine the 2 dataframes\n# all indicators on the informative sample MUST be calculated before this point\ndataframe = pd.merge(dataframe, informative, left_on='date', right_on=f'date_merge_{inf_tf}', how='left')\n# FFill to have the 1d value available in every row throughout the day.\n# Without this, comparisons would only work once per day.\ndataframe = dataframe.ffill()\nInformative timeframe < timeframe
Using informative timeframes smaller than the main dataframe timeframe is not recommended with this method, as it will not use any of the additional information this would provide. To use the more detailed information properly, more advanced methods should be applied (which are out of scope for this documentation).
"},{"location":"strategy-customization/#additional-data-dataprovider","title":"Additional data (DataProvider)","text":"The strategy provides access to the DataProvider. This allows you to get additional data to use in your strategy.
All methods return None in case of failure, i.e. failures do not raise an exception.
Please always check the mode of operation to select the correct method to get data (see below for examples).
Hyperopt Limitations
The DataProvider is available during hyperopt, however it can only be used in populate_indicators() within a strategy, not within a hyperopt class file. It is also not available in populate_entry_trend() and populate_exit_trend() methods.
available_pairs - Property with tuples listing cached pairs with their timeframe (pair, timeframe).current_whitelist() - Returns a current list of whitelisted pairs. Useful for accessing dynamic whitelists (i.e. VolumePairlist)get_pair_dataframe(pair, timeframe) - This is a universal method, which returns either historical data (for backtesting) or cached live data (for the Dry-Run and Live-Run modes).get_analyzed_dataframe(pair, timeframe) - Returns the analyzed dataframe (after calling populate_indicators(), populate_buy(), populate_sell()) and the time of the latest analysis.historic_ohlcv(pair, timeframe) - Returns historical data stored on disk.market(pair) - Returns market data for the pair: fees, limits, precisions, activity flag, etc. See ccxt documentation for more details on the Market data structure.ohlcv(pair, timeframe) - Currently cached candle (OHLCV) data for the pair, returns DataFrame or empty DataFrame.orderbook(pair, maximum) - Returns latest orderbook data for the pair, a dict with bids/asks with a total of maximum entries.ticker(pair) - Returns current ticker data for the pair. See ccxt documentation for more details on the Ticker data structure.check_delisting(pair) - Return Datetime of the pair delisting schedule if any, otherwise return Nonefunding_rate(pair) - Returns current funding rate data for the pair.runmode - Property containing the current runmode.for pair, timeframe in self.dp.available_pairs:\n print(f\"available {pair}, {timeframe}\")\nImagine you've developed a strategy that trades the 5m timeframe using signals generated from a 1d timeframe on the top 10 exchange pairs by volume.
The strategy logic might look something like this:
Scan through the top 10 pairs by volume using the VolumePairList every 5 minutes and use a 14 day RSI to enter and exit.
Due to the limited available data, it's very difficult to resample 5m candles into daily candles for use in a 14 day RSI. Most exchanges limit users to just 500-1000 candles which effectively gives us around 1.74 daily candles. We need 14 days at least!
Since we can't resample the data we will have to use an informative pair, and since the whitelist will be dynamic we don't know which pair(s) to use! We have a problem!
This is where calling self.dp.current_whitelist() comes in handy to retrieve only those pairs in the whitelist.
def informative_pairs(self):\n\n # get access to all pairs available in whitelist.\n pairs = self.dp.current_whitelist()\n # Assign timeframe to each pair so they can be downloaded and cached for strategy.\n informative_pairs = [(pair, '1d') for pair in pairs]\n return informative_pairs\nCurrent whitelist is not supported for plot-dataframe, as this command is usually used by providing an explicit pairlist and would therefore make the return values of this method misleading. It's also not supported for FreqUI visualization in webserver mode, as the configuration for webserver mode doesn't require a pairlist to be set.
# fetch live / historical candle (OHLCV) data for the first informative pair\ninf_pair, inf_timeframe = self.informative_pairs()[0]\ninformative = self.dp.get_pair_dataframe(pair=inf_pair,\n timeframe=inf_timeframe)\nWarning about backtesting
In backtesting, dp.get_pair_dataframe() behavior differs depending on where it's called. Within populate_*() methods, dp.get_pair_dataframe() returns the full timerange. Please make sure to not \"look into the future\" to avoid surprises when running in dry/live mode. Within callbacks, you'll get the full timerange up to the current (simulated) candle.
This method is used by freqtrade internally to determine the last signal. It can also be used in specific callbacks to get the signal that caused the action (see Advanced Strategy Documentation for more details on available callbacks).
# fetch current dataframe\ndataframe, last_updated = self.dp.get_analyzed_dataframe(pair=metadata['pair'],\n timeframe=self.timeframe)\nNo data available
Returns an empty dataframe if the requested pair was not cached. You can check for this with if dataframe.empty: and handle this case accordingly. This should not happen when using whitelisted pairs.
Retrieve the current order book for a pair.
if self.dp.runmode.value in ('live', 'dry_run'):\n ob = self.dp.orderbook(metadata['pair'], 1)\n dataframe['best_bid'] = ob['bids'][0][0]\n dataframe['best_ask'] = ob['asks'][0][0]\nThe orderbook structure is aligned with the order structure from ccxt, so the result will be formatted as follows:
{\n 'bids': [\n [ price, amount ], // [ float, float ]\n [ price, amount ],\n ...\n ],\n 'asks': [\n [ price, amount ],\n [ price, amount ],\n //...\n ],\n //...\n}\nTherefore, using ob['bids'][0][0] as demonstrated above will use the best bid price. ob['bids'][0][1] would look at the amount at this orderbook position.
Warning about backtesting
The order book is not part of the historic data which means backtesting and hyperopt will not work correctly if this method is used, as the method will return up-to-date values.
"},{"location":"strategy-customization/#tickerpair","title":"ticker(pair)","text":"if self.dp.runmode.value in ('live', 'dry_run'):\n ticker = self.dp.ticker(metadata['pair'])\n dataframe['last_price'] = ticker['last']\n dataframe['volume24h'] = ticker['quoteVolume']\n dataframe['vwap'] = ticker['vwap']\nWarning
Although the ticker data structure is a part of the ccxt Unified Interface, the values returned by this method can vary for different exchanges. For instance, many exchanges do not return vwap values, and some exchanges do not always fill in the last field (so it can be None), etc. So you need to carefully verify the ticker data returned from the exchange and add appropriate error handling / defaults.
Warning about backtesting
This method will always return up-to-date / real-time values. As such, usage during backtesting / hyperopt without runmode checks will lead to wrong results, e.g. your whole dataframe will contain the same single value in all rows.
"},{"location":"strategy-customization/#check_delistingpair","title":"check_delisting(pair)","text":"def custom_exit(self, pair: str, trade: Trade, current_time: datetime, current_rate: float, current_profit: float, **kwargs):\n if self.dp.runmode.value in ('live', 'dry_run'):\n delisting_dt = self.dp.check_delisting(pair)\n if delisting_dt is not None:\n return \"delist\"\nAvailabiity of delisting information
This method is only available for certain exchanges and will return None in cases this is not available or if the pair is not scheduled for delisting.
Warning about backtesting
This method will always return up-to-date / real-time values. As such, usage during backtesting / hyperopt without runmode checks will lead to wrong results, e.g. your whole dataframe will contain the same single value in all rows.
"},{"location":"strategy-customization/#funding_ratepair","title":"funding_rate(pair)","text":"Retrieves the current funding rate for the pair and only works for futures pairs in the format of base/quote:settle (e.g. ETH/USDT:USDT).
if self.dp.runmode.value in ('live', 'dry_run'):\n funding_rate = self.dp.funding_rate(metadata['pair'])\n dataframe['current_funding_rate'] = funding_rate['fundingRate']\n dataframe['next_funding_timestamp'] = funding_rate['fundingTimestamp']\n dataframe['next_funding_datetime'] = funding_rate['fundingDatetime']\nThe funding rate structure is aligned with the funding rate structure from ccxt, so the result will be formatted as follows:
{\n \"info\": {\n # ... \n },\n \"symbol\": \"BTC/USDT:USDT\",\n \"markPrice\": 110730.7,\n \"indexPrice\": 110782.52,\n \"interestRate\": 0.0001,\n \"estimatedSettlePrice\": 110822.67200153,\n \"timestamp\": 1757146321001,\n \"datetime\": \"2025-09-06T08:12:01.001Z\",\n \"fundingRate\": 5.609e-05,\n \"fundingTimestamp\": 1757174400000,\n \"fundingDatetime\": \"2025-09-06T16:00:00.000Z\",\n \"nextFundingRate\": None,\n \"nextFundingTimestamp\": None,\n \"nextFundingDatetime\": None,\n \"previousFundingRate\": None,\n \"previousFundingTimestamp\": None,\n \"previousFundingDatetime\": None,\n \"interval\": None,\n}\nTherefore, using funding_rate['fundingRate'] as demonstrated above will use the current funding rate. Actually available data will vary between exchanges, so this code may not work as expected across exchanges.
Warning about backtesting
Current funding-rate is not part of the historic data which means backtesting and hyperopt will not work correctly if this method is used, as the method will return up-to-date values. We recommend to use the historically available funding rate for backtesting (which is automatically downloaded, and is at the frequency of what the exchange provides, usually 4h or 8h). self.dp.get_pair_dataframe(pair=metadata['pair'], timeframe='8h', candle_type=\"funding_rate\")
The dataprovider .send_msg() function allows you to send custom notifications from your strategy. Identical notifications will only be sent once per candle, unless the 2nd argument (always_send) is set to True.
self.dp.send_msg(f\"{metadata['pair']} just got hot!\")\n\n # Force send this notification, avoid caching (Please read warning below!)\n self.dp.send_msg(f\"{metadata['pair']} just got hot!\", always_send=True)\nNotifications will only be sent in trading modes (Live/Dry-run) - so this method can be called without conditions for backtesting.
Spamming
You can spam yourself pretty good by setting always_send=True in this method. Use this with great care and only in conditions you know will not happen throughout a candle to avoid a message every 5 seconds.
from freqtrade.strategy import IStrategy, merge_informative_pair\nfrom pandas import DataFrame\n\nclass SampleStrategy(IStrategy):\n # strategy init stuff...\n\n timeframe = '5m'\n\n # more strategy init stuff..\n\n def informative_pairs(self):\n\n # get access to all pairs available in whitelist.\n pairs = self.dp.current_whitelist()\n # Assign tf to each pair so they can be downloaded and cached for strategy.\n informative_pairs = [(pair, '1d') for pair in pairs]\n # Optionally Add additional \"static\" pairs\n informative_pairs += [(\"ETH/USDT\", \"5m\"),\n (\"BTC/TUSD\", \"15m\"),\n ]\n return informative_pairs\n\n def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n if not self.dp:\n # Don't do anything if DataProvider is not available.\n return dataframe\n\n inf_tf = '1d'\n # Get the informative pair\n informative = self.dp.get_pair_dataframe(pair=metadata['pair'], timeframe=inf_tf)\n # Get the 14 day rsi\n informative['rsi'] = ta.RSI(informative, timeperiod=14)\n\n # Use the helper function merge_informative_pair to safely merge the pair\n # Automatically renames the columns and merges a shorter timeframe dataframe and a longer timeframe informative pair\n # use ffill to have the 1d value available in every row throughout the day.\n # Without this, comparisons between columns of the original and the informative pair would only work once per day.\n # Full documentation of this method, see below\n dataframe = merge_informative_pair(dataframe, informative, self.timeframe, inf_tf, ffill=True)\n\n # Calculate rsi of the original dataframe (5m timeframe)\n dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)\n\n # Do other stuff\n # ...\n\n return dataframe\n\n def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 30)) & # Signal: RSI crosses above 30\n (dataframe['rsi_1d'] < 30) & # Ensure daily RSI is < 30\n (dataframe['volume'] > 0) # Ensure this candle had volume (important for backtesting)\n ),\n ['enter_long', 'enter_tag']] = (1, 'rsi_cross')\nThe strategy provides access to the wallets object. This contains the current balances of your wallets/accounts on the exchange.
Backtesting / Hyperopt
Wallets behaves differently depending on the function from which it is called. Within populate_*() methods, it'll return the full wallet as configured. Within callbacks, you'll get the wallet state corresponding to the actual simulated wallet at that point in the simulation process.
Always check if wallets is available to avoid failures during backtesting.
if self.wallets:\n free_eth = self.wallets.get_free('ETH')\n used_eth = self.wallets.get_used('ETH')\n total_eth = self.wallets.get_total('ETH')\nget_free(asset) - currently available balance to tradeget_used(asset) - currently tied up balance (open orders)get_total(asset) - total available balance - sum of the 2 aboveA history of trades can be retrieved in the strategy by querying the database.
At the top of the file, import the required object:
from freqtrade.persistence import Trade\nThe following example queries trades from today for the current pair (metadata['pair']). Other filters can easily be added.
trades = Trade.get_trades_proxy(pair=metadata['pair'],\n open_date=datetime.now(timezone.utc) - timedelta(days=1),\n is_open=False,\n ]).order_by(Trade.close_date).all()\n# Summarize profit for this pair.\ncurdayprofit = sum(trade.close_profit for trade in trades)\nFor a full list of available methods, please consult the Trade object documentation.
Warning
Trade history is not available in populate_* methods during backtesting or hyperopt, and will result in empty results.
Freqtrade locks pairs automatically for the current candle (until that candle is over) when a pair exits, preventing an immediate re-entry of that pair.
This is to prevent \"waterfalls\" of many and frequent trades within a single candle.
Locked pairs will show the message Pair <pair> is currently locked..
Sometimes it may be desired to lock a pair after certain events happen (e.g. multiple losing trades in a row).
Freqtrade has an easy method to do this from within the strategy, by calling self.lock_pair(pair, until, [reason]). until must be a datetime object in the future, after which trading will be re-enabled for that pair, while reason is an optional string detailing why the pair was locked.
Locks can also be lifted manually, by calling self.unlock_pair(pair) or self.unlock_reason(<reason>), providing the reason the pair was unlocked. self.unlock_reason(<reason>) will unlock all pairs currently locked with the provided reason.
To verify if a pair is currently locked, use self.is_pair_locked(pair).
Note
Locked pairs will always be rounded up to the next candle. So assuming a 5m timeframe, a lock with until set to 10:18 will lock the pair until the candle from 10:15-10:20 will be finished.
Warning
Manually locking pairs is not available during backtesting. Only locks via Protections are allowed.
"},{"location":"strategy-customization/#pair-locking-example","title":"Pair locking example","text":"from freqtrade.persistence import Trade\nfrom datetime import timedelta, datetime, timezone\n# Put the above lines at the top of the strategy file, next to all the other imports\n# --------\n\n# Within populate indicators (or populate_entry_trend):\nif self.config['runmode'].value in ('live', 'dry_run'):\n # fetch closed trades for the last 2 days\n trades = Trade.get_trades_proxy(\n pair=metadata['pair'], is_open=False, \n open_date=datetime.now(timezone.utc) - timedelta(days=2))\n # Analyze the conditions you'd like to lock the pair .... will probably be different for every strategy\n sumprofit = sum(trade.close_profit for trade in trades)\n if sumprofit < 0:\n # Lock pair for 12 hours\n self.lock_pair(metadata['pair'], until=datetime.now(timezone.utc) + timedelta(hours=12))\nTo inspect the current main dataframe, you can issue a print-statement in either populate_entry_trend() or populate_exit_trend(). You may also want to print the pair so it's clear what data is currently shown.
def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe.loc[\n (\n #>> whatever condition<<<\n ),\n ['enter_long', 'enter_tag']] = (1, 'somestring')\n\n # Print the Analyzed pair\n print(f\"result for {metadata['pair']}\")\n\n # Inspect the last 5 rows\n print(dataframe.tail())\n\n return dataframe\nPrinting more than a few rows is also possible by using print(dataframe) instead of print(dataframe.tail()). However this is not recommended, as can results in a lot of output (~500 lines per pair every 5 seconds).
Backtesting analyzes the whole dataframe timerange at once for performance reasons. Because of this, strategy authors need to make sure that strategies do not lookahead into the future, i.e. using data that would not be available in dry or live mode.
This is a common pain-point, which can cause huge differences between backtesting and dry/live run methods. Strategies that look into the future will perform well during backtesting, often with incredible profits or winrates, but will fail or perform badly in real conditions.
The following list contains some common patterns which should be avoided to prevent frustration:
shift(-1) or other negative values. This uses data from the future in backtesting, which is not available in dry or live modes..iloc[-1] or any other absolute position in the dataframe within populate_ functions, as this will be different between dry-run and backtesting. Absolute iloc indexing is safe to use in callbacks however - see Strategy Callbacks.dataframe['mean_volume'] = dataframe['volume'].mean(). As backtesting uses the full dataframe, at any point in the dataframe, the 'mean_volume' series would include data from the future. Use rolling() calculations instead, e.g. dataframe['volume'].rolling(<window>).mean()..resample('1h'). This uses the left border of the period interval, so moves data from an hour boundary to the start of the hour. Use .resample('1h', label='right') instead..merge() to combine longer timeframes onto shorter ones. Instead, use the informative pair helpers. (A plain merge can implicitly cause a lookahead bias as date refers to open date, not close date).Identifying problems
You should always use the two helper commands lookahead-analysis and recursive-analysis, which can each help you figure out problems with your strategy in different ways. Please treat them as what they are - helpers to identify most common problems. A negative result of each does not guarantee that there are none of the above errors included.
"},{"location":"strategy-customization/#colliding-signals","title":"Colliding signals","text":"When conflicting signals collide (e.g. both 'enter_long' and 'exit_long' are set to 1), freqtrade will do nothing and ignore the entry signal. This will avoid trades that enter, and exit immediately. Obviously, this can potentially lead to missed entries.
The following rules apply, and entry signals will be ignored if more than one of the 3 signals is set:
enter_long -> exit_long, enter_shortenter_short -> exit_short, enter_longTo get additional ideas for strategies, head over to the strategy repository. Feel free to use them as examples, but results will depend on the current market situation, pairs used, etc. Therefore, these strategies should be considered only for learning purposes, not real world trading. Please backtest the strategy for your exchange/desired pairs first, then dry run to evaluate carefully, and use at your own risk.
Feel free to use any of them as inspiration for your own strategies. We're happy to accept Pull Requests containing new strategies to the repository.
"},{"location":"strategy-customization/#next-steps","title":"Next steps","text":"Now you have a perfect strategy you probably want to backtest it. Your next step is to learn how to use backtesting.
"},{"location":"strategy_analysis_example/","title":"Strategy analysis example","text":"Debugging a strategy can be time-consuming. Freqtrade offers helper functions to visualize raw data. The following assumes you work with SampleStrategy, data for 5m timeframe from Binance and have downloaded them into the data directory in the default location. Please follow the documentation for more details.
"},{"location":"strategy_analysis_example/#setup","title":"Setup","text":""},{"location":"strategy_analysis_example/#change-working-directory-to-repository-root","title":"Change Working directory to repository root","text":"import os\nfrom pathlib import Path\n\n\n# Change directory\n# Modify this cell to insure that the output shows the correct path.\n# Define all paths relative to the project root shown in the cell output\nproject_root = \"somedir/freqtrade\"\ni = 0\ntry:\n os.chdir(project_root)\n if not Path(\"LICENSE\").is_file():\n i = 0\n while i < 4 and (not Path(\"LICENSE\").is_file()):\n os.chdir(Path(Path.cwd(), \"../\"))\n i += 1\n project_root = Path.cwd()\nexcept FileNotFoundError:\n print(\"Please define the project root relative to the current directory\")\nprint(Path.cwd())\nfrom freqtrade.configuration import Configuration\n\n\n# Customize these according to your needs.\n\n# Initialize empty configuration object\nconfig = Configuration.from_files([])\n# Optionally (recommended), use existing configuration file\n# config = Configuration.from_files([\"user_data/config.json\"])\n\n# Define some constants\nconfig[\"timeframe\"] = \"5m\"\n# Name of the strategy class\nconfig[\"strategy\"] = \"SampleStrategy\"\n# Location of the data\ndata_location = config[\"datadir\"]\n# Pair to analyze - Only use one pair here\npair = \"BTC/USDT\"\n# Load data using values set above\nfrom freqtrade.data.history import load_pair_history\nfrom freqtrade.enums import CandleType\n\n\ncandles = load_pair_history(\n datadir=data_location,\n timeframe=config[\"timeframe\"],\n pair=pair,\n data_format=\"json\", # Make sure to update this to your data\n candle_type=CandleType.SPOT,\n)\n\n# Confirm success\nprint(f\"Loaded {len(candles)} rows of data for {pair} from {data_location}\")\ncandles.head()\n# Load strategy using values set above\nfrom freqtrade.data.dataprovider import DataProvider\nfrom freqtrade.resolvers import StrategyResolver\n\n\nstrategy = StrategyResolver.load_strategy(config)\nstrategy.dp = DataProvider(config, None, None)\nstrategy.ft_bot_start()\n\n# Generate buy/sell signals using strategy\ndf = strategy.analyze_ticker(candles, {\"pair\": pair})\ndf.tail()\ndata.head() would also work, however most indicators have some \"startup\" data at the top of the dataframe.crossed*() functions with completely different unitsanalyze_ticker() does not necessarily mean that 200 trades will be made during backtesting. * Assuming you use only one condition such as, df['rsi'] < 30 as buy condition, this will generate multiple \"buy\" signals for each pair in sequence (until rsi returns > 29). The bot will only buy on the first of these signals (and also only if a trade-slot (\"max_open_trades\") is still available), or on one of the middle signals, as soon as a \"slot\" becomes available. # Report results\nprint(f\"Generated {df['enter_long'].sum()} entry signals\")\ndata = df.set_index(\"date\", drop=False)\ndata.tail()\nThe following cells assume that you have already generated data using the cli. They will allow you to drill deeper into your results, and perform analysis which otherwise would make the output very difficult to digest due to information overload.
"},{"location":"strategy_analysis_example/#load-backtest-results-to-pandas-dataframe","title":"Load backtest results to pandas dataframe","text":"Analyze a trades dataframe (also used below for plotting)
from freqtrade.data.btanalysis import load_backtest_data, load_backtest_stats\n\n\n# if backtest_dir points to a directory, it'll automatically load the last backtest file.\nbacktest_dir = config[\"user_data_dir\"] / \"backtest_results\"\n# backtest_dir can also point to a specific file\n# backtest_dir = (\n# config[\"user_data_dir\"] / \"backtest_results/backtest-result-2020-07-01_20-04-22.json\"\n# )\n# You can get the full backtest statistics by using the following command.\n# This contains all information used to generate the backtest result.\nstats = load_backtest_stats(backtest_dir)\n\nstrategy = \"SampleStrategy\"\n# All statistics are available per strategy, so if `--strategy-list` was used during backtest,\n# this will be reflected here as well.\n# Example usages:\nprint(stats[\"strategy\"][strategy][\"results_per_pair\"])\n# Get pairlist used for this backtest\nprint(stats[\"strategy\"][strategy][\"pairlist\"])\n# Get market change (average change of all pairs from start to end of the backtest period)\nprint(stats[\"strategy\"][strategy][\"market_change\"])\n# Maximum drawdown ()\nprint(stats[\"strategy\"][strategy][\"max_drawdown_abs\"])\n# Maximum drawdown start and end\nprint(stats[\"strategy\"][strategy][\"drawdown_start\"])\nprint(stats[\"strategy\"][strategy][\"drawdown_end\"])\n\n\n# Get strategy comparison (only relevant if multiple strategies were compared)\nprint(stats[\"strategy_comparison\"])\n# Load backtested trades as dataframe\ntrades = load_backtest_data(backtest_dir)\n\n# Show value-counts per pair\ntrades.groupby(\"pair\")[\"exit_reason\"].value_counts()\n# Plotting equity line (starting with 0 on day 1 and adding daily profit for each backtested day)\n\nimport pandas as pd\nimport plotly.express as px\n\nfrom freqtrade.configuration import Configuration\nfrom freqtrade.data.btanalysis import load_backtest_stats\n\n\n# strategy = 'SampleStrategy'\n# config = Configuration.from_files([\"user_data/config.json\"])\n# backtest_dir = config[\"user_data_dir\"] / \"backtest_results\"\n\nstats = load_backtest_stats(backtest_dir)\nstrategy_stats = stats[\"strategy\"][strategy]\n\ndf = pd.DataFrame(columns=[\"dates\", \"equity\"], data=strategy_stats[\"daily_profit\"])\ndf[\"equity_daily\"] = df[\"equity\"].cumsum()\n\nfig = px.line(df, x=\"dates\", y=\"equity_daily\")\nfig.show()\nIn case you did already some trading and want to analyze your performance
from freqtrade.data.btanalysis import load_trades_from_db\n\n\n# Fetch trades from database\ntrades = load_trades_from_db(\"sqlite:///tradesv3.sqlite\")\n\n# Display results\ntrades.groupby(\"pair\")[\"exit_reason\"].value_counts()\nThis can be useful to find the best max_open_trades parameter, when used with backtesting in conjunction with a very high max_open_trades setting.
analyze_trade_parallelism() returns a timeseries dataframe with an \"open_trades\" column, specifying the number of open trades for each candle.
from freqtrade.data.btanalysis import analyze_trade_parallelism\n\n\n# Analyze the above\nparallel_trades = analyze_trade_parallelism(trades, \"5m\")\n\nparallel_trades.plot()\nFreqtrade offers interactive plotting capabilities based on plotly.
from freqtrade.plot.plotting import generate_candlestick_graph\n\n\n# Limit graph period to keep plotly quick and reactive\n\n# Filter trades to one pair\ntrades_red = trades.loc[trades[\"pair\"] == pair]\n\ndata_red = data[\"2019-06-01\":\"2019-06-10\"]\n# Generate candlestick graph\ngraph = generate_candlestick_graph(\n pair=pair,\n data=data_red,\n trades=trades_red,\n indicators1=[\"sma20\", \"ema50\", \"ema55\"],\n indicators2=[\"rsi\", \"macd\", \"macdsignal\", \"macdhist\"],\n)\n# Show graph inline\n# graph.show()\n\n# Render graph in a separate window\ngraph.show(renderer=\"browser\")\nimport plotly.figure_factory as ff\n\n\nhist_data = [trades.profit_ratio]\ngroup_labels = [\"profit_ratio\"] # name of the dataset\n\nfig = ff.create_distplot(hist_data, group_labels, bin_size=0.01)\nfig.show()\nFeel free to submit an issue or Pull Request enhancing this document if you would like to share ideas on how to best analyze the data.
"},{"location":"strategy_migration/","title":"Strategy Migration between V2 and V3","text":"To support new markets and trade-types (namely short trades / trades with leverage), some things had to change in the interface. If you intend on using markets other than spot markets, please migrate your strategy to the new format.
We have put a great effort into keeping compatibility with existing strategies, so if you just want to continue using freqtrade in spot markets, there should be no changes necessary for now.
You can use the quick summary as checklist. Please refer to the detailed sections below for full migration details.
"},{"location":"strategy_migration/#quick-summary-migration-checklist","title":"Quick summary / migration checklist","text":"Note : forcesell, forcebuy, emergencysell are changed to force_exit, force_enter, emergency_exit respectively.
populate_buy_trend() -> populate_entry_trend()populate_sell_trend() -> populate_exit_trend()custom_sell() -> custom_exit()check_buy_timeout() -> check_entry_timeout()check_sell_timeout() -> check_exit_timeout()side argument to callbacks without trade objectcustom_stake_amountconfirm_trade_entrycustom_entry_priceconfirm_trade_exitbuy -> enter_longsell -> exit_longbuy_tag -> enter_tag (used for both long and short trades)enter_short and corresponding new column exit_shortis_shortentry_sideexit_sidetrade_directionsell_reason -> exit_reasontrade.nr_of_successful_buys to trade.nr_of_successful_entries (mostly relevant for adjust_trade_position())leverage callback.@informative decorator now takes an optional candle_type argument.stoploss_from_open and stoploss_from_absolute now take is_short as additional argument.INTERFACE_VERSION should be set to 3.order_time_in_force buy -> entry, sell -> exit.order_types buy -> entry, sell -> exit.unfilledtimeout buy -> entry, sell -> exit.ignore_buying_expired_candle_after -> moved to root level instead of \"ask_strategy/exit_pricing\"exit_reason checks and eventually update your strategy.sell_signal -> exit_signalcustom_sell -> custom_exitforce_sell -> force_exitemergency_sell -> emergency_exitbid_strategy -> entry_pricingask_strategy -> exit_pricingask_last_balance -> price_last_balancebid_last_balance -> price_last_balancewebhookbuy -> entrywebhookbuyfill -> entry_fillwebhookbuycancel -> entry_cancelwebhooksell -> exitwebhooksellfill -> exit_fillwebhooksellcancel -> exit_cancelbuy -> entrybuy_fill -> entry_fillbuy_cancel -> entry_cancelsell -> exitsell_fill -> exit_fillsell_cancel -> exit_canceluse_sell_signal -> use_exit_signalsell_profit_only -> exit_profit_onlysell_profit_offset -> exit_profit_offsetignore_roi_if_buy_signal -> ignore_roi_if_entry_signalforcebuy_enable -> force_entry_enablepopulate_buy_trend","text":"In populate_buy_trend() - you will want to change the columns you assign from 'buy' to 'enter_long', as well as the method name from populate_buy_trend to populate_entry_trend.
def populate_buy_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 30)) & # Signal: RSI crosses above 30\n (dataframe['tema'] <= dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] > dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['buy', 'buy_tag']] = (1, 'rsi_cross')\n\n return dataframe\nAfter:
def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 30)) & # Signal: RSI crosses above 30\n (dataframe['tema'] <= dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] > dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['enter_long', 'enter_tag']] = (1, 'rsi_cross')\n\n return dataframe\nPlease refer to the Strategy documentation on how to enter and exit short trades.
"},{"location":"strategy_migration/#populate_sell_trend","title":"populate_sell_trend","text":"Similar to populate_buy_trend, populate_sell_trend() will be renamed to populate_exit_trend(). We'll also change the column from 'sell' to 'exit_long'.
def populate_sell_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 70)) & # Signal: RSI crosses above 70\n (dataframe['tema'] > dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] < dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['sell', 'exit_tag']] = (1, 'some_exit_tag')\n return dataframe\nAfter
def populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:\n dataframe.loc[\n (\n (qtpylib.crossed_above(dataframe['rsi'], 70)) & # Signal: RSI crosses above 70\n (dataframe['tema'] > dataframe['bb_middleband']) & # Guard\n (dataframe['tema'] < dataframe['tema'].shift(1)) & # Guard\n (dataframe['volume'] > 0) # Make sure Volume is not 0\n ),\n ['exit_long', 'exit_tag']] = (1, 'some_exit_tag')\n return dataframe\nPlease refer to the Strategy documentation on how to enter and exit short trades.
"},{"location":"strategy_migration/#custom_sell","title":"custom_sell","text":"custom_sell has been renamed to custom_exit. It's now also being called for every iteration, independent of current profit and exit_profit_only settings.
class AwesomeStrategy(IStrategy):\n def custom_sell(self, pair: str, trade: 'Trade', current_time: 'datetime', current_rate: float,\n current_profit: float, **kwargs):\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n last_candle = dataframe.iloc[-1].squeeze()\n # ...\nclass AwesomeStrategy(IStrategy):\n def custom_exit(self, pair: str, trade: 'Trade', current_time: 'datetime', current_rate: float,\n current_profit: float, **kwargs):\n dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)\n last_candle = dataframe.iloc[-1].squeeze()\n # ...\ncustom_entry_timeout","text":"check_buy_timeout() has been renamed to check_entry_timeout(), and check_sell_timeout() has been renamed to check_exit_timeout().
class AwesomeStrategy(IStrategy):\n def check_buy_timeout(self, pair: str, trade: 'Trade', order: dict, \n current_time: datetime, **kwargs) -> bool:\n return False\n\n def check_sell_timeout(self, pair: str, trade: 'Trade', order: dict, \n current_time: datetime, **kwargs) -> bool:\n return False \nclass AwesomeStrategy(IStrategy):\n def check_entry_timeout(self, pair: str, trade: 'Trade', order: 'Order', \n current_time: datetime, **kwargs) -> bool:\n return False\n\n def check_exit_timeout(self, pair: str, trade: 'Trade', order: 'Order', \n current_time: datetime, **kwargs) -> bool:\n return False \ncustom_stake_amount","text":"New string argument side - which can be either \"long\" or \"short\".
class AwesomeStrategy(IStrategy):\n def custom_stake_amount(self, pair: str, current_time: datetime, current_rate: float,\n proposed_stake: float, min_stake: Optional[float], max_stake: float,\n entry_tag: Optional[str], **kwargs) -> float:\n # ... \n return proposed_stake\nclass AwesomeStrategy(IStrategy):\n def custom_stake_amount(self, pair: str, current_time: datetime, current_rate: float,\n proposed_stake: float, min_stake: float | None, max_stake: float,\n entry_tag: str | None, side: str, **kwargs) -> float:\n # ... \n return proposed_stake\nconfirm_trade_entry","text":"New string argument side - which can be either \"long\" or \"short\".
class AwesomeStrategy(IStrategy):\n def confirm_trade_entry(self, pair: str, order_type: str, amount: float, rate: float,\n time_in_force: str, current_time: datetime, entry_tag: Optional[str], \n **kwargs) -> bool:\n return True\nAfter:
class AwesomeStrategy(IStrategy):\n def confirm_trade_entry(self, pair: str, order_type: str, amount: float, rate: float,\n time_in_force: str, current_time: datetime, entry_tag: str | None, \n side: str, **kwargs) -> bool:\n return True\nconfirm_trade_exit","text":"Changed argument sell_reason to exit_reason. For compatibility, sell_reason will still be provided for a limited time.
class AwesomeStrategy(IStrategy):\n def confirm_trade_exit(self, pair: str, trade: Trade, order_type: str, amount: float,\n rate: float, time_in_force: str, sell_reason: str,\n current_time: datetime, **kwargs) -> bool:\n return True\nAfter:
class AwesomeStrategy(IStrategy):\n def confirm_trade_exit(self, pair: str, trade: Trade, order_type: str, amount: float,\n rate: float, time_in_force: str, exit_reason: str,\n current_time: datetime, **kwargs) -> bool:\n return True\ncustom_entry_price","text":"New string argument side - which can be either \"long\" or \"short\".
class AwesomeStrategy(IStrategy):\n def custom_entry_price(self, pair: str, current_time: datetime, proposed_rate: float,\n entry_tag: Optional[str], **kwargs) -> float:\n return proposed_rate\nAfter:
class AwesomeStrategy(IStrategy):\n def custom_entry_price(self, pair: str, trade: Trade | None, current_time: datetime, proposed_rate: float,\n entry_tag: str | None, side: str, **kwargs) -> float:\n return proposed_rate\nWhile adjust-trade-position itself did not change, you should no longer use trade.nr_of_successful_buys - and instead use trade.nr_of_successful_entries, which will also include short entries.
Added argument \"is_short\" to stoploss_from_open and stoploss_from_absolute. This should be given the value of trade.is_short.
def custom_stoploss(self, pair: str, trade: 'Trade', current_time: datetime,\n current_rate: float, current_profit: float, **kwargs) -> float:\n # once the profit has risen above 10%, keep the stoploss at 7% above the open price\n if current_profit > 0.10:\n return stoploss_from_open(0.07, current_profit)\n\n return stoploss_from_absolute(current_rate - (candle['atr'] * 2), current_rate)\n\n return 1\nAfter:
def custom_stoploss(self, pair: str, trade: 'Trade', current_time: datetime,\n current_rate: float, current_profit: float, after_fill: bool, \n **kwargs) -> float | None:\n # once the profit has risen above 10%, keep the stoploss at 7% above the open price\n if current_profit > 0.10:\n return stoploss_from_open(0.07, current_profit, is_short=trade.is_short)\n\n return stoploss_from_absolute(current_rate - (candle['atr'] * 2), current_rate, is_short=trade.is_short, leverage=trade.leverage)\norder_time_in_force","text":"order_time_in_force attributes changed from \"buy\" to \"entry\" and \"sell\" to \"exit\".
order_time_in_force: dict = {\n \"buy\": \"gtc\",\n \"sell\": \"gtc\",\n }\nAfter:
order_time_in_force: dict = {\n \"entry\": \"GTC\",\n \"exit\": \"GTC\",\n }\norder_types","text":"order_types have changed all wordings from buy to entry - and sell to exit. And two words are joined with _.
order_types = {\n \"buy\": \"limit\",\n \"sell\": \"limit\",\n \"emergencysell\": \"market\",\n \"forcesell\": \"market\",\n \"forcebuy\": \"market\",\n \"stoploss\": \"market\",\n \"stoploss_on_exchange\": false,\n \"stoploss_on_exchange_interval\": 60\n }\nAfter:
order_types = {\n \"entry\": \"limit\",\n \"exit\": \"limit\",\n \"emergency_exit\": \"market\",\n \"force_exit\": \"market\",\n \"force_entry\": \"market\",\n \"stoploss\": \"market\",\n \"stoploss_on_exchange\": false,\n \"stoploss_on_exchange_interval\": 60\n }\nuse_sell_signal -> use_exit_signalsell_profit_only -> exit_profit_onlysell_profit_offset -> exit_profit_offsetignore_roi_if_buy_signal -> ignore_roi_if_entry_signal # These values can be overridden in the config.\n use_sell_signal = True\n sell_profit_only = True\n sell_profit_offset: 0.01\n ignore_roi_if_buy_signal = False\nAfter:
# These values can be overridden in the config.\n use_exit_signal = True\n exit_profit_only = True\n exit_profit_offset: 0.01\n ignore_roi_if_entry_signal = False\nunfilledtimeout","text":"unfilledtimeout have changed all wordings from buy to entry - and sell to exit.
unfilledtimeout = {\n \"buy\": 10,\n \"sell\": 10,\n \"exit_timeout_count\": 0,\n \"unit\": \"minutes\"\n }\nAfter:
unfilledtimeout = {\n \"entry\": 10,\n \"exit\": 10,\n \"exit_timeout_count\": 0,\n \"unit\": \"minutes\"\n }\norder pricing","text":"Order pricing changed in 2 ways. bid_strategy was renamed to entry_pricing and ask_strategy was renamed to exit_pricing. The attributes ask_last_balance -> price_last_balance and bid_last_balance -> price_last_balance were renamed as well. Also, price-side can now be defined as ask, bid, same or other. Please refer to the pricing documentation for more information.
{\n \"bid_strategy\": {\n \"price_side\": \"bid\",\n \"use_order_book\": true,\n \"order_book_top\": 1,\n \"ask_last_balance\": 0.0,\n \"check_depth_of_market\": {\n \"enabled\": false,\n \"bids_to_ask_delta\": 1\n }\n },\n \"ask_strategy\":{\n \"price_side\": \"ask\",\n \"use_order_book\": true,\n \"order_book_top\": 1,\n \"bid_last_balance\": 0.0\n \"ignore_buying_expired_candle_after\": 120\n }\n}\nafter:
{\n \"entry_pricing\": {\n \"price_side\": \"same\",\n \"use_order_book\": true,\n \"order_book_top\": 1,\n \"price_last_balance\": 0.0,\n \"check_depth_of_market\": {\n \"enabled\": false,\n \"bids_to_ask_delta\": 1\n }\n },\n \"exit_pricing\":{\n \"price_side\": \"same\",\n \"use_order_book\": true,\n \"order_book_top\": 1,\n \"price_last_balance\": 0.0\n },\n \"ignore_buying_expired_candle_after\": 120\n}\nThe populate_any_indicators() method has been split into feature_engineering_expand_all(), feature_engineering_expand_basic(), feature_engineering_standard() andset_freqai_targets().
For each new function, the pair (and timeframe where necessary) will be automatically added to the column. As such, the definition of features becomes much simpler with the new logic.
For a full explanation of each method, please go to the corresponding freqAI documentation page
def populate_any_indicators(\n self, pair, df, tf, informative=None, set_generalized_indicators=False\n ):\n\n if informative is None:\n informative = self.dp.get_pair_dataframe(pair, tf)\n\n # first loop is automatically duplicating indicators for time periods\n for t in self.freqai_info[\"feature_parameters\"][\"indicator_periods_candles\"]:\n\n t = int(t)\n informative[f\"%-{pair}rsi-period_{t}\"] = ta.RSI(informative, timeperiod=t)\n informative[f\"%-{pair}mfi-period_{t}\"] = ta.MFI(informative, timeperiod=t)\n informative[f\"%-{pair}adx-period_{t}\"] = ta.ADX(informative, timeperiod=t)\n informative[f\"%-{pair}sma-period_{t}\"] = ta.SMA(informative, timeperiod=t)\n informative[f\"%-{pair}ema-period_{t}\"] = ta.EMA(informative, timeperiod=t)\n\n bollinger = qtpylib.bollinger_bands(\n qtpylib.typical_price(informative), window=t, stds=2.2\n )\n informative[f\"{pair}bb_lowerband-period_{t}\"] = bollinger[\"lower\"]\n informative[f\"{pair}bb_middleband-period_{t}\"] = bollinger[\"mid\"]\n informative[f\"{pair}bb_upperband-period_{t}\"] = bollinger[\"upper\"]\n\n informative[f\"%-{pair}bb_width-period_{t}\"] = (\n informative[f\"{pair}bb_upperband-period_{t}\"]\n - informative[f\"{pair}bb_lowerband-period_{t}\"]\n ) / informative[f\"{pair}bb_middleband-period_{t}\"]\n informative[f\"%-{pair}close-bb_lower-period_{t}\"] = (\n informative[\"close\"] / informative[f\"{pair}bb_lowerband-period_{t}\"]\n )\n\n informative[f\"%-{pair}roc-period_{t}\"] = ta.ROC(informative, timeperiod=t)\n\n informative[f\"%-{pair}relative_volume-period_{t}\"] = (\n informative[\"volume\"] / informative[\"volume\"].rolling(t).mean()\n ) # (1)\n\n informative[f\"%-{pair}pct-change\"] = informative[\"close\"].pct_change()\n informative[f\"%-{pair}raw_volume\"] = informative[\"volume\"]\n informative[f\"%-{pair}raw_price\"] = informative[\"close\"]\n # (2)\n\n indicators = [col for col in informative if col.startswith(\"%\")]\n # This loop duplicates and shifts all indicators to add a sense of recency to data\n for n in range(self.freqai_info[\"feature_parameters\"][\"include_shifted_candles\"] + 1):\n if n == 0:\n continue\n informative_shift = informative[indicators].shift(n)\n informative_shift = informative_shift.add_suffix(\"_shift-\" + str(n))\n informative = pd.concat((informative, informative_shift), axis=1)\n\n df = merge_informative_pair(df, informative, self.config[\"timeframe\"], tf, ffill=True)\n skip_columns = [\n (s + \"_\" + tf) for s in [\"date\", \"open\", \"high\", \"low\", \"close\", \"volume\"]\n ]\n df = df.drop(columns=skip_columns)\n\n # Add generalized indicators here (because in live, it will call this\n # function to populate indicators during training). Notice how we ensure not to\n # add them multiple times\n if set_generalized_indicators:\n df[\"%-day_of_week\"] = (df[\"date\"].dt.dayofweek + 1) / 7\n df[\"%-hour_of_day\"] = (df[\"date\"].dt.hour + 1) / 25\n # (3)\n\n # user adds targets here by prepending them with &- (see convention below)\n df[\"&-s_close\"] = (\n df[\"close\"]\n .shift(-self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .rolling(self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .mean()\n / df[\"close\"]\n - 1\n ) # (4)\n\n return df\nfeature_engineering_expand_allindicator_periods_candles - move tofeature_engineering_expand_basic().feature_engineering_standard().set_freqai_targets().Features will now expand automatically. As such, the expansion loops, as well as the {pair} / {timeframe} parts will need to be removed.
def feature_engineering_expand_all(self, dataframe, period, **kwargs) -> DataFrame::\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This function will automatically expand the defined features on the config defined\n `indicator_periods_candles`, `include_timeframes`, `include_shifted_candles`, and\n `include_corr_pairs`. In other words, a single feature defined in this function\n will automatically expand to a total of\n `indicator_periods_candles` * `include_timeframes` * `include_shifted_candles` *\n `include_corr_pairs` numbers of features added to the model.\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n More details on how these config defined parameters accelerate feature engineering\n in the documentation at:\n\n https://www.freqtrade.io/en/latest/freqai-parameter-table/#feature-parameters\n\n https://www.freqtrade.io/en/latest/freqai-feature-engineering/#defining-the-features\n\n :param df: strategy dataframe which will receive the features\n :param period: period of the indicator - usage example:\n dataframe[\"%-ema-period\"] = ta.EMA(dataframe, timeperiod=period)\n \"\"\"\n\n dataframe[\"%-rsi-period\"] = ta.RSI(dataframe, timeperiod=period)\n dataframe[\"%-mfi-period\"] = ta.MFI(dataframe, timeperiod=period)\n dataframe[\"%-adx-period\"] = ta.ADX(dataframe, timeperiod=period)\n dataframe[\"%-sma-period\"] = ta.SMA(dataframe, timeperiod=period)\n dataframe[\"%-ema-period\"] = ta.EMA(dataframe, timeperiod=period)\n\n bollinger = qtpylib.bollinger_bands(\n qtpylib.typical_price(dataframe), window=period, stds=2.2\n )\n dataframe[\"bb_lowerband-period\"] = bollinger[\"lower\"]\n dataframe[\"bb_middleband-period\"] = bollinger[\"mid\"]\n dataframe[\"bb_upperband-period\"] = bollinger[\"upper\"]\n\n dataframe[\"%-bb_width-period\"] = (\n dataframe[\"bb_upperband-period\"]\n - dataframe[\"bb_lowerband-period\"]\n ) / dataframe[\"bb_middleband-period\"]\n dataframe[\"%-close-bb_lower-period\"] = (\n dataframe[\"close\"] / dataframe[\"bb_lowerband-period\"]\n )\n\n dataframe[\"%-roc-period\"] = ta.ROC(dataframe, timeperiod=period)\n\n dataframe[\"%-relative_volume-period\"] = (\n dataframe[\"volume\"] / dataframe[\"volume\"].rolling(period).mean()\n )\n\n return dataframe\nBasic features. Make sure to remove the {pair} part from your features.
def feature_engineering_expand_basic(self, dataframe: DataFrame, **kwargs) -> DataFrame::\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This function will automatically expand the defined features on the config defined\n `include_timeframes`, `include_shifted_candles`, and `include_corr_pairs`.\n In other words, a single feature defined in this function\n will automatically expand to a total of\n `include_timeframes` * `include_shifted_candles` * `include_corr_pairs`\n numbers of features added to the model.\n\n Features defined here will *not* be automatically duplicated on user defined\n `indicator_periods_candles`\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n More details on how these config defined parameters accelerate feature engineering\n in the documentation at:\n\n https://www.freqtrade.io/en/latest/freqai-parameter-table/#feature-parameters\n\n https://www.freqtrade.io/en/latest/freqai-feature-engineering/#defining-the-features\n\n :param df: strategy dataframe which will receive the features\n dataframe[\"%-pct-change\"] = dataframe[\"close\"].pct_change()\n dataframe[\"%-ema-200\"] = ta.EMA(dataframe, timeperiod=200)\n \"\"\"\n dataframe[\"%-pct-change\"] = dataframe[\"close\"].pct_change()\n dataframe[\"%-raw_volume\"] = dataframe[\"volume\"]\n dataframe[\"%-raw_price\"] = dataframe[\"close\"]\n return dataframe\n def feature_engineering_standard(self, dataframe: DataFrame, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n This optional function will be called once with the dataframe of the base timeframe.\n This is the final function to be called, which means that the dataframe entering this\n function will contain all the features and columns created by all other\n freqai_feature_engineering_* functions.\n\n This function is a good place to do custom exotic feature extractions (e.g. tsfresh).\n This function is a good place for any feature that should not be auto-expanded upon\n (e.g. day of the week).\n\n All features must be prepended with `%` to be recognized by FreqAI internals.\n\n More details about feature engineering available:\n\n https://www.freqtrade.io/en/latest/freqai-feature-engineering\n\n :param df: strategy dataframe which will receive the features\n usage example: dataframe[\"%-day_of_week\"] = (dataframe[\"date\"].dt.dayofweek + 1) / 7\n \"\"\"\n dataframe[\"%-day_of_week\"] = dataframe[\"date\"].dt.dayofweek\n dataframe[\"%-hour_of_day\"] = dataframe[\"date\"].dt.hour\n return dataframe\nTargets now get their own, dedicated method.
def set_freqai_targets(self, dataframe: DataFrame, **kwargs) -> DataFrame:\n \"\"\"\n *Only functional with FreqAI enabled strategies*\n Required function to set the targets for the model.\n All targets must be prepended with `&` to be recognized by the FreqAI internals.\n\n More details about feature engineering available:\n\n https://www.freqtrade.io/en/latest/freqai-feature-engineering\n\n :param df: strategy dataframe which will receive the targets\n usage example: dataframe[\"&-target\"] = dataframe[\"close\"].shift(-1) / dataframe[\"close\"]\n \"\"\"\n dataframe[\"&-s_close\"] = (\n dataframe[\"close\"]\n .shift(-self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .rolling(self.freqai_info[\"feature_parameters\"][\"label_period_candles\"])\n .mean()\n / dataframe[\"close\"]\n - 1\n )\n\n return dataframe\nIf you have created your own custom IFreqaiModel with a custom train()/predict() function, and you still rely on data_cleaning_train/predict(), then you will need to migrate to the new pipeline. If your model does not rely on data_cleaning_train/predict(), then you do not need to worry about this migration. That means that this migration guide is relevant for a very small percentage of power-users. If you stumbled upon this guide by mistake, feel free to inquire in depth about your problem in the Freqtrade discord server.
The conversion involves first removing data_cleaning_train/predict() and replacing them with a define_data_pipeline() and define_label_pipeline() function to your IFreqaiModel class:
class MyCoolFreqaiModel(BaseRegressionModel):\n \"\"\"\n Some cool custom IFreqaiModel you made before Freqtrade version 2023.6\n \"\"\"\n def train(\n self, unfiltered_df: DataFrame, pair: str, dk: FreqaiDataKitchen, **kwargs\n ) -> Any:\n\n # ... your custom stuff\n\n # Remove these lines\n # data_dictionary = dk.make_train_test_datasets(features_filtered, labels_filtered)\n # self.data_cleaning_train(dk)\n # data_dictionary = dk.normalize_data(data_dictionary)\n # (1)\n\n # Add these lines. Now we control the pipeline fit/transform ourselves\n dd = dk.make_train_test_datasets(features_filtered, labels_filtered)\n dk.feature_pipeline = self.define_data_pipeline(threads=dk.thread_count)\n dk.label_pipeline = self.define_label_pipeline(threads=dk.thread_count)\n\n (dd[\"train_features\"],\n dd[\"train_labels\"],\n dd[\"train_weights\"]) = dk.feature_pipeline.fit_transform(dd[\"train_features\"],\n dd[\"train_labels\"],\n dd[\"train_weights\"])\n\n (dd[\"test_features\"],\n dd[\"test_labels\"],\n dd[\"test_weights\"]) = dk.feature_pipeline.transform(dd[\"test_features\"],\n dd[\"test_labels\"],\n dd[\"test_weights\"])\n\n dd[\"train_labels\"], _, _ = dk.label_pipeline.fit_transform(dd[\"train_labels\"])\n dd[\"test_labels\"], _, _ = dk.label_pipeline.transform(dd[\"test_labels\"])\n\n # ... your custom code\n\n return model\n\n def predict(\n self, unfiltered_df: DataFrame, dk: FreqaiDataKitchen, **kwargs\n ) -> tuple[DataFrame, npt.NDArray[np.int_]]:\n\n # ... your custom stuff\n\n # Remove these lines:\n # self.data_cleaning_predict(dk)\n # (2)\n\n # Add these lines:\n dk.data_dictionary[\"prediction_features\"], outliers, _ = dk.feature_pipeline.transform(\n dk.data_dictionary[\"prediction_features\"], outlier_check=True)\n\n # Remove this line\n # pred_df = dk.denormalize_labels_from_metadata(pred_df)\n # (3)\n\n # Replace with these lines\n pred_df, _, _ = dk.label_pipeline.inverse_transform(pred_df)\n if self.freqai_info.get(\"DI_threshold\", 0) > 0:\n dk.DI_values = dk.feature_pipeline[\"di\"].di_values\n else:\n dk.DI_values = np.zeros(outliers.shape[0])\n dk.do_predict = outliers\n\n # ... your custom code\n return (pred_df, dk.do_predict)\ndefine_data_pipeline() and define_label_pipeline() functions. The data_cleaning_train() and data_cleaning_predict() functions are no longer used. You can override define_data_pipeline() to create your own custom pipeline if you wish.define_data_pipeline() and define_label_pipeline() functions. The data_cleaning_train() and data_cleaning_predict() functions are no longer used. You can override define_data_pipeline() to create your own custom pipeline if you wish.Below we explain how to create your Telegram Bot, and how to get your Telegram user id.
"},{"location":"telegram-usage/#1-create-your-telegram-bot","title":"1. Create your Telegram bot","text":"Start a chat with the Telegram BotFather
Send the message /newbot.
BotFather response:
Alright, a new bot. How are we going to call it? Please choose a name for your bot.
Choose the public name of your bot (e.x. Freqtrade bot)
BotFather response:
Good. Now let's choose a username for your bot. It must end in bot. Like this, for example: TetrisBot or tetris_bot.
Choose the name id of your bot and send it to the BotFather (e.g. \"My_own_freqtrade_bot\")
BotFather response:
Done! Congratulations on your new bot. You will find it at t.me/yourbots_name_bot. You can now add a description, about section and profile picture for your bot, see /help for a list of commands. By the way, when you've finished creating your cool bot, ping our Bot Support if you want a better username for it. Just make sure the bot is fully operational before you do this.
Use this token to access the HTTP API: 22222222:APITOKEN
For a description of the Bot API, see this page: https://core.telegram.org/bots/api Father bot will return you the token (API key)
Copy the API Token (22222222:APITOKEN in the above example) and keep use it for the config parameter token.
Don't forget to start the conversation with your bot, by clicking /START button
Talk to the userinfobot
Get your \"Id\", you will use it for the config parameter chat_id.
To get the group ID, you can add the bot to the group, start freqtrade, and issue a /tg_info command. This will return the group id to you, without having to use some random bot. While \"chat_id\" is still required, it doesn't need to be set to this particular group id for this command.
The response will also contain the \"topic_id\" if necessary - both in a format ready to copy/paste into your configuration.
{\n \"enabled\": true,\n \"token\": \"********\",\n \"chat_id\": \"-1001332619709\",\n \"topic_id\": \"122\"\n}\nFor the Freqtrade configuration, you can then use the full value (including - ) as string:
\"chat_id\": \"-1001332619709\"\nUsing telegram groups
When using telegram groups, you're giving every member of the telegram group access to your freqtrade bot and to all commands possible via telegram. Please make sure that you can trust everyone in the telegram group to avoid unpleasant surprises.
"},{"location":"telegram-usage/#group-topic-id","title":"Group Topic ID","text":"To use a specific topic in a group, you can use the topic_id parameter in the configuration. This will allow you to use the bot in a specific topic in a group. Without this, the bot will always respond to the general channel in the group if topics are enabled for a group chat.
\"chat_id\": \"-1001332619709\",\n \"topic_id\": \"3\"\nSimilar to the group-id - you can use /tg_info from the topic/thread to get the correct topic-id.
For groups, it can be useful to limit who can send commands to the bot.
If \"authorized_users\": [] is present and empty, no user will be allowed to control the bot. In the below example, only the user with the id \"1234567\" is allowed to control the bot - all other users will only be able to receive messages.
\"chat_id\": \"-1001332619709\",\n \"topic_id\": \"3\",\n \"authorized_users\": [\"1234567\"]\nFreqtrade provides means to control the verbosity of your telegram bot. Each setting has the following possible values:
on - Messages will be sent, and user will be notified.silent - Message will be sent, Notification will be without sound / vibration.off - Skip sending a message-type all together.Example configuration showing the different settings:
\"telegram\": {\n \"enabled\": true,\n \"token\": \"your_telegram_token\",\n \"chat_id\": \"your_telegram_chat_id\",\n \"allow_custom_messages\": true,\n \"notification_settings\": {\n \"status\": \"silent\",\n \"warning\": \"on\",\n \"startup\": \"off\",\n \"entry\": \"silent\",\n \"entry_fill\": \"on\",\n \"entry_cancel\": \"silent\",\n \"exit\": {\n \"roi\": \"silent\",\n \"emergency_exit\": \"on\",\n \"force_exit\": \"on\",\n \"exit_signal\": \"silent\",\n \"trailing_stop_loss\": \"on\",\n \"stop_loss\": \"on\",\n \"stoploss_on_exchange\": \"on\",\n \"custom_exit\": \"silent\", // custom_exit without specifying an exit reason\n \"partial_exit\": \"on\",\n // \"custom_exit_message\": \"silent\", // Disable individual custom exit reasons\n \"*\": \"off\" // Disable all other exit reasons\n },\n // \"exit\": \"off\", // Simplistic configuration to disable all exit messages\n \"exit_cancel\": \"on\",\n \"exit_fill\": \"off\",\n \"protection_trigger\": \"off\",\n \"protection_trigger_global\": \"on\",\n \"strategy_msg\": \"off\",\n \"show_candle\": \"off\"\n },\n \"reload\": true,\n \"balance_dust_level\": 0.01\n},\nentry notifications are sent when the order is placed, while entry_fill notifications are sent when the order is filled on the exchange. exit notifications are sent when the order is placed, while exit_fill notifications are sent when the order is filled on the exchange. Exit messages (exit and exit_fill) can be further controlled at individual exit reasons level, with the specific exit reason as the key. the default for all exit reasons is on - but can be configured via special * key - which will act as a wildcard for all exit reasons that are not explicitly defined.*_fill notifications are off by default and must be explicitly enabled. protection_trigger notifications are sent when a protection triggers and protection_trigger_global notifications trigger when global protections are triggered. strategy_msg - Receive notifications from the strategy, sent via self.dp.send_msg() from the strategy more details. show_candle - show candle values as part of entry/exit messages. Only possible values are \"ohlc\" or \"off\". balance_dust_level will define what the /balance command takes as \"dust\" - Currencies with a balance below this will be shown. allow_custom_messages completely disable strategy messages. reload allows you to disable reload-buttons on selected messages. Telegram allows us to create a custom keyboard with buttons for commands. The default custom keyboard looks like this.
[\n [\"/daily\", \"/profit\", \"/balance\"], # row 1, 3 commands\n [\"/status\", \"/status table\", \"/performance\"], # row 2, 3 commands\n [\"/count\", \"/start\", \"/stop\", \"/help\"] # row 3, 4 commands\n]\nYou can create your own keyboard in config.json:
\"telegram\": {\n \"enabled\": true,\n \"token\": \"your_telegram_token\",\n \"chat_id\": \"your_telegram_chat_id\",\n \"keyboard\": [\n [\"/daily\", \"/stats\", \"/balance\", \"/profit\"],\n [\"/status table\", \"/performance\"],\n [\"/reload_config\", \"/count\", \"/logs\"]\n ]\n },\nSupported Commands
Only the following commands are allowed. Command arguments are not supported!
/start, /pause, /stop, /status, /status table, /trades, /profit, /performance, /daily, /stats, /count, /locks, /balance, /stopentry, /reload_config, /show_config, /logs, /whitelist, /blacklist, /help, /version, /marketdir
Per default, the Telegram bot shows predefined commands. Some commands are only available by sending them to the bot. The table below list the official commands. You can ask at any moment for help with /help.
/start Starts the trader /pause | /stopentry | /stopbuy Pause the trader. Gracefully handle open trades according to their rules. Do not enter new positions. /stop Stops the trader /reload_config Reloads the configuration file /show_config Shows part of the current configuration with relevant settings to operation /logs [limit] Show last log messages. /help Show help message /version Show version Status /status Lists all open trades /status <trade_id> Lists one or more specific trade. Separate multiple with a blank space. /status table List all open trades in a table format. Pending buy orders are marked with an asterisk () Pending sell orders are marked with a double asterisk (*) /order <trade_id> Lists orders of one or more specific trade. Separate multiple with a blank space. /trades [limit] List all recently closed trades in a table format. /count Displays number of trades used and available /locks Show currently locked pairs. /unlock <pair or lock_id> Remove the lock for this pair (or for this lock id). /marketdir [long | short | even | none] Updates the user managed variable that represents the current market direction. If no direction is provided, the currently set direction will be displayed. /list_custom_data <trade_id> [key] List custom_data for Trade ID & Key combination. If no Key is supplied it will list all key-value pairs found for that Trade ID. Modify Trade states /forceexit <trade_id> | /fx <tradeid> Instantly exits the given trade (Ignoring minimum_roi). /forceexit all | /fx all Instantly exits all open trades (Ignoring minimum_roi). /fx alias for /forceexit /forcelong <pair> [rate] Instantly buys the given pair. Rate is optional and only applies to limit orders. (force_entry_enable must be set to True) /forceshort <pair> [rate] Instantly shorts the given pair. Rate is optional and only applies to limit orders. This will only work on non-spot markets. (force_entry_enable must be set to True) /delete <trade_id> Delete a specific trade from the Database. Tries to close open orders. Requires manual handling of this trade on the exchange. /reload_trade <trade_id> Reload a trade from the Exchange. Only works in live, and can potentially help recover a trade that was manually sold on the exchange. /cancel_open_order <trade_id> | /coo <trade_id> Cancel an open order for a trade. Metrics /profit [<n>] Display a summary of your profit/loss from close trades and some stats about your performance, over the last n days (all trades by default) /profit_[long|short] [<n>] Display a summary of your profit/loss from close trades in one direction and some stats about your performance, over the last n days (all trades by default) /performance Show performance of each finished trade grouped by pair /balance Show bot managed balance per currency /balance full Show account balance per currency /daily <n> Shows profit or loss per day, over the last n days (n defaults to 7) /weekly <n> Shows profit or loss per week, over the last n weeks (n defaults to 8) /monthly <n> Shows profit or loss per month, over the last n months (n defaults to 6) /stats Shows Wins / losses by Exit reason as well as Avg. holding durations for buys and sells /exits Shows Wins / losses by Exit reason as well as Avg. holding durations for buys and sells /entries Shows Wins / losses by Exit reason as well as Avg. holding durations for buys and sells /whitelist [sorted] [baseonly] Show the current whitelist. Optionally display in alphabetical order and/or with just the base currency of each pairing. /blacklist [pair] Show the current blacklist, or adds a pair to the blacklist."},{"location":"telegram-usage/#telegram-commands-in-action","title":"Telegram commands in action","text":"Below, example of Telegram message you will receive for each command.
"},{"location":"telegram-usage/#start","title":"/start","text":"Status: running
Status: paused, no more entries will occur from now. Run /start to enable entries.
Prevents the bot from opening new trades by changing the state to paused. Open trades will continue to be managed according to their regular rules (ROI/exit signals, stop-loss, etc.). Note that position adjustment remains active, but only on the exit side \u2014 meaning that when the bot is paused, it can only reduce the position size of open trades.
After this, give the bot time to close off open trades (can be checked via /status table). Once all positions are closed, run /stop to completely stop the bot.
Use /start to resume the bot to the running state, allowing it to open new positions.
Warning
The pause/stopentry signal is ONLY active while the bot is running, and is not persisted anyway, so restarting the bot will cause this to reset.
"},{"location":"telegram-usage/#stop","title":"/stop","text":"Stopping trader ... Status: stopped
For each open trade, the bot will send you the following message. Enter Tag is configurable via Strategy.
Trade ID: 123 (since 1 days ago) Current Pair: CVC/BTC Direction: Long Leverage: 1.0 Amount: 26.64180098 Enter Tag: Awesome Long Signal Open Rate: 0.00007489 Current Rate: 0.00007489 Unrealized Profit: 12.95% Stoploss: 0.00007389 (-0.02%)
Return the status of all open trades in a table format.
ID L/S Pair Since Profit\n---- -------- ------- --------\n 67 L SC/BTC 1 d 13.33%\n 123 S CVC/BTC 1 h 12.95%\nReturn the number of trades used and available.
current max\n--------- -----\n 2 10\nAlso available as /profit_long and /profit_short to show profit for long or short trades only.
Return a summary of your profit/loss and performance.
ROI: Close trades \u2219 0.00485701 BTC (2.2%) (15.2 \u03a3%) \u2219 62.968 USD ROI: All trades \u2219 0.00255280 BTC (1.5%) (6.43 \u03a3%) \u2219 33.095 EUR
Total Trade Count: 138 Bot started: 2022-07-11 18:40:44 First Trade opened: 3 days ago Latest Trade opened: 2 minutes ago Avg. Duration: 2:33:45 Best Performing: PAY/BTC: 50.23% Trading volume: 0.5 BTC Profit factor: 1.04 Win / Loss: 102 / 36 Winrate: 73.91% Expectancy (Ratio): 4.87 (1.66) Max Drawdown: 9.23% (0.01255 BTC)
The relative profit of 1.2% is the average profit per trade. The relative profit of 15.2 \u03a3% is be based on the starting capital - so in this case, the starting capital was 0.00485701 * 1.152 = 0.00738 BTC. Starting capital() is either taken from the available_capital setting, or calculated by using current wallet size - profits. Profit Factor is calculated as gross profits / gross losses - and should serve as an overall metric for the strategy. Expectancy corresponds to the average return per currency unit at risk, i.e. the winrate and the risk-reward ratio (the average gain of winning trades compared to the average loss of losing trades). Expectancy Ratio is expected profit or loss of a subsequent trade based on the performance of all past trades. Max drawdown corresponds to the backtesting metric Absolute Drawdown (Account) - calculated as (Absolute Drawdown) / (DrawdownHigh + startingBalance). Bot started date will refer to the date the bot was first started. For older bots, this will default to the first trade's open date.
BINANCE: Exiting BTC/LTC with limit 0.01650000 (profit: ~-4.07%, -0.00008168)
Tip
You can get a list of all open trades by calling /forceexit without parameter, which will show a list of buttons to simply exit a trade. This command has an alias in /fx - which has the same capabilities, but is faster to type in \"emergency\" situations.
/forcebuy <pair> [rate] is also supported for longs but should be considered deprecated.
BINANCE: Long ETH/BTC with limit 0.03400000 (1.000000 ETH, 225.290 USD)
Omitting the pair will open a query asking for the pair to trade (based on the current whitelist). Trades created through /forcelong will have the buy-tag of force_entry.
Note that for this to work, force_entry_enable needs to be set to true.
More details
","text":""},{"location":"telegram-usage/#performance","title":"/performanceReturn the performance of each crypto-currency the bot has sold.
Performance: 1. RCN/BTC 0.003 BTC (57.77%) (1) 2. PAY/BTC 0.0012 BTC (56.91%) (1) 3. VIB/BTC 0.0011 BTC (47.07%) (1) 4. SALT/BTC 0.0010 BTC (30.24%) (1) 5. STORJ/BTC 0.0009 BTC (27.24%) (1) ...
The relative performance is calculated against the total investment in the currency, aggregating all filled entries for the currency.
","text":""},{"location":"telegram-usage/#balance","title":"/balanceReturn the balance of all crypto-currency your have on the exchange.
Currency: BTC Available: 3.05890234 Balance: 3.05890234 Pending: 0.0
Currency: CVC Available: 86.64180098 Balance: 86.64180098 Pending: 0.0
","text":""},{"location":"telegram-usage/#daily","title":"/dailyPer default /daily will return the 7 last days. The example below if for /daily 3:
Daily Profit over the last 3 days:
Day (count) USDT USD Profit %\n-------------- ------------ ---------- ----------\n2022-06-11 (1) -0.746 USDT -0.75 USD -0.08%\n2022-06-10 (0) 0 USDT 0.00 USD 0.00%\n2022-06-09 (5) 20 USDT 20.10 USD 5.00%\nPer default /weekly will return the 8 last weeks, including the current week. Each week starts from Monday. The example below if for /weekly 3:
Weekly Profit over the last 3 weeks (starting from Monday):
Monday (count) Profit BTC Profit USD Profit %\n------------- -------------- ------------ ----------\n2018-01-03 (5) 0.00224175 BTC 29,142 USD 4.98%\n2017-12-27 (1) 0.00033131 BTC 4,307 USD 0.00%\n2017-12-20 (4) 0.00269130 BTC 34.986 USD 5.12%\nPer default /monthly will return the 6 last months, including the current month. The example below if for /monthly 3:
Monthly Profit over the last 3 months:
Month (count) Profit BTC Profit USD Profit %\n------------- -------------- ------------ ----------\n2018-01 (20) 0.00224175 BTC 29,142 USD 4.98%\n2017-12 (5) 0.00033131 BTC 4,307 USD 0.00%\n2017-11 (10) 0.00269130 BTC 34.986 USD 5.10%\nShows the current whitelist
Using whitelist StaticPairList with 22 pairs IOTA/BTC, NEO/BTC, TRX/BTC, VET/BTC, ADA/BTC, ETC/BTC, NCASH/BTC, DASH/BTC, XRP/BTC, XVG/BTC, EOS/BTC, LTC/BTC, OMG/BTC, BTG/BTC, LSK/BTC, ZEC/BTC, HOT/BTC, IOTX/BTC, XMR/BTC, AST/BTC, XLM/BTC, NANO/BTC
Shows the current blacklist. If Pair is set, then this pair will be added to the pairlist. Also supports multiple pairs, separated by a space. Use /reload_config to reset the blacklist.
Using blacklist StaticPairList with 2 pairs DODGE/BTC, HOT/BTC.
Version: 0.14.3
If a market direction is provided the command updates the user managed variable that represents the current market direction. This variable is not set to any valid market direction on bot startup and must be set by the user. The example below is for /marketdir long:
Successfully updated marketdirection from none to long.\nIf no market direction is provided the command outputs the currently set market directions. The example below is for /marketdir:
Currently set marketdirection: even\nYou can use the market direction in your strategy via self.market_direction.
Bot restarts
Please note that the market direction is not persisted, and will be reset after a bot restart/reload.
Backtesting
As this value/variable is intended to be changed manually in dry/live trading. Strategies using market_direction will probably not produce reliable, reproducible results (changes to this variable will not be reflected for backtesting). Use at your own risk.
A position freqtrade enters is stored in a Trade object - which is persisted to the database. It's a core concept of freqtrade - and something you'll come across in many sections of the documentation, which will most likely point you to this location.
It will be passed to the strategy in many strategy callbacks. The object passed to the strategy cannot be modified directly. Indirect modifications may occur based on callback results.
"},{"location":"trade-object/#trade-available-attributes","title":"Trade - Available attributes","text":"The following attributes / properties are available for each individual trade - and can be used with trade.<property> (e.g. trade.pair).
pair string Pair of this trade. is_open boolean Is the trade currently open, or has it been concluded. open_rate float Rate this trade was entered at (Avg. entry rate in case of trade-adjustments). close_rate float Close rate - only set when is_open = False. stake_amount float Amount in Stake (or Quote) currency. amount float Amount in Asset / Base currency that is currently owned. Will be 0.0 until the initial order fills. open_date datetime Timestamp when trade was opened use open_date_utc instead open_date_utc datetime Timestamp when trade was opened - in UTC. close_date datetime Timestamp when trade was closed use close_date_utc instead close_date_utc datetime Timestamp when trade was closed - in UTC. close_profit float Relative profit at the time of trade closure. 0.01 == 1% close_profit_abs float Absolute profit (in stake currency) at the time of trade closure. realized_profit float Absolute already realized profit (in stake currency) while the trade is still open. leverage float Leverage used for this trade - defaults to 1.0 in spot markets. enter_tag string Tag provided on entry via the enter_tag column in the dataframe. is_short boolean True for short trades, False otherwise. orders Order[] List of order objects attached to this trade (includes both filled and cancelled orders). date_last_filled_utc datetime Time of the last filled order. entry_side \"buy\" / \"sell\" Order Side the trade was entered. exit_side \"buy\" / \"sell\" Order Side that will result in a trade exit / position reduction. trade_direction \"long\" / \"short\" Trade direction in text - long or short. nr_of_successful_entries int Number of successful (filled) entry orders. nr_of_successful_exits int Number of successful (filled) exit orders. has_open_orders boolean Has the trade open orders (excluding stoploss orders)."},{"location":"trade-object/#class-methods","title":"Class methods","text":"The following are class methods - which return generic information, and usually result in an explicit query against the database. They can be used as Trade.<method> - e.g. open_trades = Trade.get_open_trade_count()
Backtesting/hyperopt
Most methods will work in both backtesting / hyperopt and live/dry modes. During backtesting, it's limited to usage in strategy callbacks. Usage in populate_*() methods is not supported and will result in wrong results.
When your strategy needs some information on existing (open or close) trades - it's best to use Trade.get_trades_proxy().
Usage:
from freqtrade.persistence import Trade\nfrom datetime import timedelta\n\n# ...\ntrade_hist = Trade.get_trades_proxy(pair='ETH/USDT', is_open=False, open_date=current_date - timedelta(days=2))\nget_trades_proxy() supports the following keyword arguments. All arguments are optional - calling get_trades_proxy() without arguments will return a list of all trades in the database.
pair e.g. pair='ETH/USDT'is_open e.g. is_open=Falseopen_date e.g. open_date=current_date - timedelta(days=2)close_date e.g. close_date=current_date - timedelta(days=5)Get the number of currently open trades
from freqtrade.persistence import Trade\n# ...\nopen_trades = Trade.get_open_trade_count()\nRetrieve the total profit the bot has generated so far. Aggregates close_profit_abs for all closed trades.
from freqtrade.persistence import Trade\n\n# ...\nprofit = Trade.get_total_closed_profit()\nRetrieve the total stake_amount that's currently in trades.
from freqtrade.persistence import Trade\n\n# ...\nprofit = Trade.total_open_trades_stakes()\nRetrieve the overall performance - similar to the /performance telegram command.
from freqtrade.persistence import Trade\n\n# ...\nif self.config['runmode'].value in ('live', 'dry_run'):\n performance = Trade.get_overall_performance()\nSample return value: ETH/BTC had 5 trades, with a total profit of 1.5% (ratio of 0.015).
{\"pair\": \"ETH/BTC\", \"profit\": 0.015, \"count\": 5}\nAn Order object represents an order on the exchange (or a simulated order in dry-run mode). An Order object will always be tied to it's corresponding Trade, and only really makes sense in the context of a trade.
an Order object is typically attached to a trade. Most properties here can be None as they are dependent on the exchange response.
Attribute DataType Descriptiontrade Trade Trade object this order is attached to ft_pair string Pair this order is for ft_is_open boolean is the order still open? order_type string Order type as defined on the exchange - usually market, limit or stoploss status string Status as defined by ccxt's order structure. Usually open, closed, expired, canceled or rejected side string buy or sell price float Price the order was placed at average float Average price the order filled at amount float Amount in base currency filled float Filled amount (in base currency) (use safe_filled instead) safe_filled float Filled amount (in base currency) - guaranteed to not be None remaining float Remaining amount (use safe_remaining instead) safe_remaining float Remaining amount - either taken from the exchange or calculated. cost float Cost of the order - usually average * filled (Exchange dependent on futures, may contain the cost with or without leverage and may be in contracts.) stake_amount float Stake amount used for this order. Added in 2023.7. stake_amount_filled float Filled Stake amount used for this order. Added in 2024.11. order_date datetime Order creation date use order_date_utc instead order_date_utc datetime Order creation date (in UTC) order_fill_date datetime Order fill date use order_fill_utc instead order_fill_date_utc datetime Order fill date"},{"location":"updating/","title":"How to update","text":"To update your freqtrade installation, please use one of the below methods, corresponding to your installation method.
Tracking changes
Breaking changes / changed behavior will be documented in the changelog that is posted alongside every release. For the develop branch, please follow PR's to avoid being surprised by changes.
"},{"location":"updating/#docker","title":"Docker","text":"Legacy installations using the master image
We're switching from master to stable for the release Images - please adjust your docker-file and replace freqtradeorg/freqtrade:master with freqtradeorg/freqtrade:stable
docker compose pull\ndocker compose up -d\n./setup.sh --update\nNote
Make sure to run this command with your virtual environment disabled!
"},{"location":"updating/#plain-native-installation","title":"Plain native installation","text":"Please ensure that you're also updating dependencies - otherwise things might break without you noticing.
git pull\npip install -U -r requirements.txt\npip install -e .\n\n# Ensure freqUI is at the latest version\nfreqtrade install-ui \nUpdate-problems usually come missing dependencies (you didn't follow the above instructions) - or from updated dependencies, which fail to install (for example TA-lib). Please refer to the corresponding installation sections (common problems linked below)
"},{"location":"utils/","title":"Utility Subcommands","text":"Besides the Live-Trade and Dry-Run run modes, the backtesting and hyperopt optimization subcommands, and the download-data subcommand which prepares historical data, the bot contains a number of utility subcommands. They are described in this section.
Creates the directory structure to hold your files for freqtrade. Will also create strategy and hyperopt examples for you to get started. Can be used multiple times - using --reset will reset the sample strategy and hyperopt files to their default state.
usage: freqtrade create-userdir [-h] [--userdir PATH] [--reset]\n\noptions:\n -h, --help show this help message and exit\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n --reset Reset sample files to their original state.\nWarning
Using --reset may result in loss of data, since this will overwrite all sample files without asking again.
\u251c\u2500\u2500 backtest_results\n\u251c\u2500\u2500 data\n\u251c\u2500\u2500 hyperopt_results\n\u251c\u2500\u2500 hyperopts\n\u2502\u00a0\u00a0 \u251c\u2500\u2500 sample_hyperopt_loss.py\n\u251c\u2500\u2500 notebooks\n\u2502\u00a0\u00a0 \u2514\u2500\u2500 strategy_analysis_example.ipynb\n\u251c\u2500\u2500 plot\n\u2514\u2500\u2500 strategies\n \u2514\u2500\u2500 sample_strategy.py\nCreates a new configuration file, asking some questions which are important selections for a configuration.
usage: freqtrade new-config [-h] [-c PATH]\n\noptions:\n -h, --help show this help message and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\nWarning
Only vital questions are asked. Freqtrade offers a lot more configuration possibilities, which are listed in the Configuration documentation
"},{"location":"utils/#create-config-examples","title":"Create config examples","text":"$ freqtrade new-config --config user_data/config_binance.json\n\n? Do you want to enable Dry-run (simulated trades)? Yes\n? Please insert your stake currency: BTC\n? Please insert your stake amount: 0.05\n? Please insert max_open_trades (Integer or -1 for unlimited open trades): 3\n? Please insert your desired timeframe (e.g. 5m): 5m\n? Please insert your display Currency (for reporting): USD\n? Select exchange binance\n? Do you want to enable Telegram? No\nShow configuration file (with sensitive values redacted by default). Especially useful with split configuration files or environment variables, where this command will show the merged configuration.
usage: freqtrade show-config [-h] [--userdir PATH] [-c PATH]\n [--show-sensitive]\n\noptions:\n -h, --help show this help message and exit\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n --show-sensitive Show secrets in the output.\nYour combined configuration is:\n{\n \"exit_pricing\": {\n \"price_side\": \"other\",\n \"use_order_book\": true,\n \"order_book_top\": 1\n },\n \"stake_currency\": \"USDT\",\n \"exchange\": {\n \"name\": \"binance\",\n \"key\": \"REDACTED\",\n \"secret\": \"REDACTED\",\n \"ccxt_config\": {},\n \"ccxt_async_config\": {},\n }\n // ...\n}\nSharing information provided by this command
We try to remove all known sensitive information from the default output (without --show-sensitive). Yet, please do double-check for sensitive values in your output to make sure you're not accidentally exposing some private info.
Creates a new strategy from a template similar to SampleStrategy. The file will be named inline with your class name, and will not overwrite existing files.
Results will be located in user_data/strategies/<strategyclassname>.py.
usage: freqtrade new-strategy [-h] [--userdir PATH] [-s NAME]\n [--strategy-path PATH]\n [--template {full,minimal,advanced}]\n\noptions:\n -h, --help show this help message and exit\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n -s NAME, --strategy NAME\n Specify strategy class name which will be used by the\n bot.\n --strategy-path PATH Specify additional strategy lookup path.\n --template {full,minimal,advanced}\n Use a template which is either `minimal`, `full`\n (containing multiple sample indicators) or `advanced`.\n Default: `full`.\nfreqtrade new-strategy --strategy AwesomeStrategy\nWith custom user directory
freqtrade new-strategy --userdir ~/.freqtrade/ --strategy AwesomeStrategy\nUsing the advanced template (populates all optional functions and methods)
freqtrade new-strategy --strategy AwesomeStrategy --template advanced\nUse the list-strategies subcommand to see all strategies in one particular directory.
This subcommand is useful for finding problems in your environment with loading strategies: modules with strategies that contain errors and failed to load are printed in red (LOAD FAILED), while strategies with duplicate names are printed in yellow (DUPLICATE NAME).
usage: freqtrade list-strategies [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [--strategy-path PATH] [-1]\n [--recursive-strategy-search]\n\noptions:\n -h, --help show this help message and exit\n --strategy-path PATH Specify additional strategy lookup path.\n -1, --one-column Print output in one column.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nWarning
Using these commands will try to load all python files from a directory. This can be a security risk if untrusted files reside in this directory, since all module-level code is executed.
Example: Search default strategies directories (within the default userdir).
freqtrade list-strategies\nExample: Search strategies directory within the userdir.
freqtrade list-strategies --userdir ~/.freqtrade/\nExample: Search dedicated strategy path.
freqtrade list-strategies --strategy-path ~/.freqtrade/strategies/\nUse the list-hyperoptloss subcommand to see all hyperopt loss functions available.
It provides a quick list of all available loss functions in your environment.
This subcommand can be useful for finding problems in your environment with loading loss functions: modules with Hyperopt-Loss functions that contain errors and failed to load are printed in red (LOAD FAILED), while hyperopt-Loss functions with duplicate names are printed in yellow (DUPLICATE NAME).
usage: freqtrade list-hyperoptloss [-h] [-v] [--no-color] [--logfile FILE]\n [-V] [-c PATH] [-d PATH] [--userdir PATH]\n [--hyperopt-path PATH] [-1]\n\noptions:\n -h, --help show this help message and exit\n --hyperopt-path PATH Specify additional lookup path for Hyperopt Loss\n functions.\n -1, --one-column Print output in one column.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nUse the list-freqaimodels subcommand to see all freqAI models available.
This subcommand is useful for finding problems in your environment with loading freqAI models: modules with models that contain errors and failed to load are printed in red (LOAD FAILED), while models with duplicate names are printed in yellow (DUPLICATE NAME).
usage: freqtrade list-freqaimodels [-h] [-v] [--no-color] [--logfile FILE]\n [-V] [-c PATH] [-d PATH] [--userdir PATH]\n [--freqaimodel-path PATH] [-1]\n\noptions:\n -h, --help show this help message and exit\n --freqaimodel-path PATH\n Specify additional lookup path for freqaimodels.\n -1, --one-column Print output in one column.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nUse the list-exchanges subcommand to see the exchanges available for the bot.
usage: freqtrade list-exchanges [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH] [-1] [-a]\n [--trading-mode {spot,margin,futures}]\n [--dex-exchanges]\n\noptions:\n -h, --help show this help message and exit\n -1, --one-column Print output in one column.\n -a, --all Print all exchanges known to the ccxt library.\n --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}\n Select Trading mode\n --dex-exchanges Print only DEX exchanges.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nExample: see exchanges available for the bot:
$ freqtrade list-exchanges\nExchanges available for Freqtrade:\nExchange name Supported Markets Reason\n------------------ ----------- ---------------------- ------------------------------------------------------------------------\nbinance Official spot, isolated futures\nbitmart Official spot\nbybit spot, isolated futures\ngate Official spot, isolated futures\nhtx Official spot\nhuobi spot\nkraken Official spot\nokx Official spot, isolated futures\nOutput reduced for clarity - supported and available exchanges may change over time.
missing opt exchanges
Values with \"missing opt:\" might need special configuration (e.g. using orderbook if fetchTickers is missing) - but should in theory work (although we cannot guarantee they will).
Example: see all exchanges supported by the ccxt library (including 'bad' ones, i.e. those that are known to not work with Freqtrade)
$ freqtrade list-exchanges -a\nAll exchanges supported by the ccxt library:\nExchange name Valid Supported Markets Reason\n------------------ ------- ----------- ---------------------- ---------------------------------------------------------------------------------\nbinance True Official spot, isolated futures\nbitflyer False spot missing: fetchOrder. missing opt: fetchTickers.\nbitmart True Official spot\nbybit True spot, isolated futures\ngate True Official spot, isolated futures\nhtx True Official spot\nkraken True Official spot\nokx True Official spot, isolated futures\nReduced output - supported and available exchanges may change over time.
"},{"location":"utils/#list-timeframes","title":"List Timeframes","text":"Use the list-timeframes subcommand to see the list of timeframes available for the exchange.
usage: freqtrade list-timeframes [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [--exchange EXCHANGE] [-1]\n\noptions:\n -h, --help show this help message and exit\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\n -1, --one-column Print output in one column.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n$ freqtrade list-timeframes -c config_binance.json\n...\nTimeframes available for the exchange `binance`: 1m, 3m, 5m, 15m, 30m, 1h, 2h, 4h, 6h, 8h, 12h, 1d, 3d, 1w, 1M\n$ for i in `freqtrade list-exchanges -1`; do freqtrade list-timeframes --exchange $i; done\nThe list-pairs and list-markets subcommands allow to see the pairs/markets available on exchange.
Pairs are markets with the '/' character between the base currency part and the quote currency part in the market symbol. For example, in the 'ETH/BTC' pair 'ETH' is the base currency, while 'BTC' is the quote currency.
For pairs traded by Freqtrade the pair quote currency is defined by the value of the stake_currency configuration setting.
You can print info about any pair/market with these subcommands - and you can filter output by quote-currency using --quote BTC, or by base-currency using --base ETH options correspondingly.
These subcommands have same usage and same set of available options:
usage: freqtrade list-pairs [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [--exchange EXCHANGE] [--print-list]\n [--print-json] [-1] [--print-csv]\n [--base BASE_CURRENCY [BASE_CURRENCY ...]]\n [--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]] [-a]\n [--trading-mode {spot,margin,futures}]\n\noptions:\n -h, --help show this help message and exit\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\n --print-list Print list of pairs or market symbols. By default data\n is printed in the tabular format.\n --print-json Print list of pairs or market symbols in JSON format.\n -1, --one-column Print output in one column.\n --print-csv Print exchange pair or market data in the csv format.\n --base BASE_CURRENCY [BASE_CURRENCY ...]\n Specify base currency(-ies). Space-separated list.\n --quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]\n Specify quote currency(-ies). Space-separated list.\n -a, --all Print all pairs or market symbols. By default only\n active ones are shown.\n --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}\n Select Trading mode\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nBy default, only active pairs/markets are shown. Active pairs/markets are those that can currently be traded on the exchange. You can use the -a/-all option to see the list of all pairs/markets, including the inactive ones. Pairs may be listed as untradeable if the smallest tradeable price for the market is very small, i.e. less than 1e-11 (0.00000000001)
Pairs/markets are sorted by its symbol string in the printed output.
"},{"location":"utils/#examples","title":"Examples","text":"$ freqtrade list-pairs --quote USD --print-json\nconfig_binance.json configuration file (i.e. on the \"Binance\" exchange) with base currencies BTC or ETH and quote currencies USDT or USD, as the human-readable list with summary:$ freqtrade list-pairs -c config_binance.json --all --base BTC ETH --quote USDT USD --print-list\n$ freqtrade list-markets --exchange kraken --all\nUse the test-pairlist subcommand to test the configuration of dynamic pairlists.
Requires a configuration with specified pairlists attribute. Can be used to generate static pairlists to be used during backtesting / hyperopt.
usage: freqtrade test-pairlist [-h] [--userdir PATH] [-v] [-c PATH]\n [--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]]\n [-1] [--print-json] [--exchange EXCHANGE]\n\noptions:\n -h, --help show this help message and exit\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n --quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]\n Specify quote currency(-ies). Space-separated list.\n -1, --one-column Print output in one column.\n --print-json Print list of pairs or market symbols in JSON format.\n --exchange EXCHANGE Exchange name. Only valid if no config is provided.\nShow whitelist when using a dynamic pairlist.
freqtrade test-pairlist --config config.json --quote USDT BTC\nfreqtrade convert-db can be used to convert your database from one system to another (sqlite -> postgres, postgres -> other postgres), migrating all trades, orders and Pairlocks.
Please refer to the corresponding documentation to learn about requirements for different database systems.
usage: freqtrade convert-db [-h] [--db-url PATH] [--db-url-from PATH]\n\noptions:\n -h, --help show this help message and exit\n --db-url PATH Override trades database URL, this is useful in custom\n deployments (default: `sqlite:///tradesv3.sqlite` for\n Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for\n Dry Run).\n --db-url-from PATH Source db url to use when migrating a database.\nWarning
Please ensure to only use this on an empty target database. Freqtrade will perform a regular migration, but may fail if entries already existed.
"},{"location":"utils/#webserver-mode","title":"Webserver mode","text":"Experimental
Webserver mode is an experimental mode to increase backesting and strategy development productivity. There may still be bugs - so if you happen to stumble across these, please report them as github issues, thanks.
Run freqtrade in webserver mode. Freqtrade will start the webserver and allow FreqUI to start and control backtesting processes. This has the advantage that data will not be reloaded between backtesting runs (as long as timeframe and timerange remain identical). FreqUI will also show the backtesting results.
usage: freqtrade webserver [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n\noptions:\n -h, --help show this help message and exit\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nYou can also use webserver mode via docker. Starting a one-off container requires the configuration of the port explicitly, as ports are not exposed by default. You can use docker compose run --rm -p 127.0.0.1:8080:8080 freqtrade webserver to start a one-off container that'll be removed once you stop it. This assumes that port 8080 is still available and no other bot is running on that port.
Alternatively, you can reconfigure the docker-compose file to have the command updated:
command: >\n webserver\n --config /freqtrade/user_data/config.json\nYou can now use docker compose up to start the webserver. This assumes that the configuration has a webserver enabled and configured for docker (listening port = 0.0.0.0).
Tip
Don't forget to reset the command back to the trade command if you want to start a live or dry-run bot.
"},{"location":"utils/#show-previous-backtest-results","title":"Show previous Backtest results","text":"Allows you to show previous backtest results. Adding --show-pair-list outputs a sorted pair list you can easily copy/paste into your configuration (omitting bad pairs).
Only using winning pairs can lead to an overfitted strategy, which will not work well on future data. Make sure to extensively test your strategy in dry-run before risking real money.
usage: freqtrade backtesting-show [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [--backtest-filename PATH]\n [--backtest-directory PATH]\n [--show-pair-list]\n [--breakdown {day,week,month,year} [{day,week,month,year} ...]]\n\noptions:\n -h, --help show this help message and exit\n --backtest-filename PATH, --export-filename PATH\n Use this filename for backtest results.Example:\n `--backtest-\n filename=backtest_results_2020-09-27_16-20-48.json`.\n Assumes either `user_data/backtest_results/` or\n `--export-directory` as base directory.\n --backtest-directory PATH, --export-directory PATH\n Directory to use for backtest results. Example:\n `--export-directory=user_data/backtest_results/`.\n --show-pair-list Show backtesting pairlist sorted by profit.\n --breakdown {day,week,month,year} [{day,week,month,year} ...]\n Show backtesting breakdown per [day, week, month,\n year].\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nAdvanced backtest result analysis.
More details in the Backtesting analysis Section.
usage: freqtrade backtesting-analysis [-h] [-v] [--no-color] [--logfile FILE]\n [-V] [-c PATH] [-d PATH]\n [--userdir PATH]\n [--backtest-filename PATH]\n [--backtest-directory PATH]\n [--analysis-groups {0,1,2,3,4,5} [{0,1,2,3,4,5} ...]]\n [--enter-reason-list ENTER_REASON_LIST [ENTER_REASON_LIST ...]]\n [--exit-reason-list EXIT_REASON_LIST [EXIT_REASON_LIST ...]]\n [--indicator-list INDICATOR_LIST [INDICATOR_LIST ...]]\n [--entry-only] [--exit-only]\n [--timerange TIMERANGE]\n [--rejected-signals] [--analysis-to-csv]\n [--analysis-csv-path ANALYSIS_CSV_PATH]\n\noptions:\n -h, --help show this help message and exit\n --backtest-filename PATH, --export-filename PATH\n Use this filename for backtest results.Example:\n `--backtest-\n filename=backtest_results_2020-09-27_16-20-48.json`.\n Assumes either `user_data/backtest_results/` or\n `--export-directory` as base directory.\n --backtest-directory PATH, --export-directory PATH\n Directory to use for backtest results. Example:\n `--export-directory=user_data/backtest_results/`.\n --analysis-groups {0,1,2,3,4,5} [{0,1,2,3,4,5} ...]\n grouping output - 0: simple wins/losses by enter tag,\n 1: by enter_tag, 2: by enter_tag and exit_tag, 3: by\n pair and enter_tag, 4: by pair, enter_ and exit_tag\n (this can get quite large), 5: by exit_tag\n --enter-reason-list ENTER_REASON_LIST [ENTER_REASON_LIST ...]\n Space separated list of entry signals to analyse.\n Default: all. e.g. 'entry_tag_a entry_tag_b'\n --exit-reason-list EXIT_REASON_LIST [EXIT_REASON_LIST ...]\n Space separated list of exit signals to analyse.\n Default: all. e.g. 'exit_tag_a roi stop_loss\n trailing_stop_loss'\n --indicator-list INDICATOR_LIST [INDICATOR_LIST ...]\n Space separated list of indicators to analyse. e.g.\n 'close rsi bb_lowerband profit_abs'\n --entry-only Only analyze entry signals.\n --exit-only Only analyze exit signals.\n --timerange TIMERANGE\n Specify what timerange of data to use.\n --rejected-signals Analyse rejected signals\n --analysis-to-csv Save selected analysis tables to individual CSVs\n --analysis-csv-path ANALYSIS_CSV_PATH\n Specify a path to save the analysis CSVs if\n --analysis-to-csv is enabled. Default:\n user_data/basktesting_results/\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nYou can list the hyperoptimization epochs the Hyperopt module evaluated previously with the hyperopt-list sub-command.
usage: freqtrade hyperopt-list [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH] [--best]\n [--profitable] [--min-trades INT]\n [--max-trades INT] [--min-avg-time FLOAT]\n [--max-avg-time FLOAT] [--min-avg-profit FLOAT]\n [--max-avg-profit FLOAT]\n [--min-total-profit FLOAT]\n [--max-total-profit FLOAT]\n [--min-objective FLOAT] [--max-objective FLOAT]\n [--print-json] [--no-details]\n [--hyperopt-filename FILENAME]\n [--export-csv FILE]\n\noptions:\n -h, --help show this help message and exit\n --best Select only best epochs.\n --profitable Select only profitable epochs.\n --min-trades INT Select epochs with more than INT trades.\n --max-trades INT Select epochs with less than INT trades.\n --min-avg-time FLOAT Select epochs above average time.\n --max-avg-time FLOAT Select epochs below average time.\n --min-avg-profit FLOAT\n Select epochs above average profit.\n --max-avg-profit FLOAT\n Select epochs below average profit.\n --min-total-profit FLOAT\n Select epochs above total profit.\n --max-total-profit FLOAT\n Select epochs below total profit.\n --min-objective FLOAT\n Select epochs above objective.\n --max-objective FLOAT\n Select epochs below objective.\n --print-json Print output in JSON format.\n --no-details Do not print best epoch details.\n --hyperopt-filename FILENAME\n Hyperopt result filename.Example: `--hyperopt-\n filename=hyperopt_results_2020-09-27_16-20-48.pickle`\n --export-csv FILE Export to CSV-File. This will disable table print.\n Example: --export-csv hyperopt.csv\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nNote
hyperopt-list will automatically use the latest available hyperopt results file. You can override this using the --hyperopt-filename argument, and specify another, available filename (without path!).
List all results, print details of the best result at the end:
freqtrade hyperopt-list\nList only epochs with positive profit. Do not print the details of the best epoch, so that the list can be iterated in a script:
freqtrade hyperopt-list --profitable --no-details\nYou can show the details of any hyperoptimization epoch previously evaluated by the Hyperopt module with the hyperopt-show subcommand.
usage: freqtrade hyperopt-show [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH] [--best]\n [--profitable] [-n INT] [--print-json]\n [--hyperopt-filename FILENAME] [--no-header]\n [--disable-param-export]\n [--breakdown {day,week,month,year} [{day,week,month,year} ...]]\n\noptions:\n -h, --help show this help message and exit\n --best Select only best epochs.\n --profitable Select only profitable epochs.\n -n INT, --index INT Specify the index of the epoch to print details for.\n --print-json Print output in JSON format.\n --hyperopt-filename FILENAME\n Hyperopt result filename.Example: `--hyperopt-\n filename=hyperopt_results_2020-09-27_16-20-48.pickle`\n --no-header Do not print epoch details header.\n --disable-param-export\n Disable automatic hyperopt parameter export.\n --breakdown {day,week,month,year} [{day,week,month,year} ...]\n Show backtesting breakdown per [day, week, month,\n year].\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nNote
hyperopt-show will automatically use the latest available hyperopt results file. You can override this using the --hyperopt-filename argument, and specify another, available filename (without path!).
Print details for the epoch 168 (the number of the epoch is shown by the hyperopt-list subcommand or by Hyperopt itself during hyperoptimization run):
freqtrade hyperopt-show -n 168\nPrints JSON data with details for the last best epoch (i.e., the best of all epochs):
freqtrade hyperopt-show --best -n -1 --print-json --no-header\nPrint selected (or all) trades from database to screen.
usage: freqtrade show-trades [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [--db-url PATH]\n [--trade-ids TRADE_IDS [TRADE_IDS ...]]\n [--print-json]\n\noptions:\n -h, --help show this help message and exit\n --db-url PATH Override trades database URL, this is useful in custom\n deployments (default: `sqlite:///tradesv3.sqlite` for\n Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for\n Dry Run).\n --trade-ids TRADE_IDS [TRADE_IDS ...]\n Specify the list of trade ids.\n --print-json Print output in JSON format.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nPrint trades with id 2 and 3 as json
freqtrade show-trades --db-url sqlite:///tradesv3.sqlite --trade-ids 2 3 --print-json\nUpdates listed strategies or all strategies within the strategies folder to be v3 compliant. If the command runs without --strategy-list then all strategies inside the strategies folder will be converted. Your original strategy will remain available in the user_data/strategies_orig_updater/ directory.
Conversion results
Strategy updater will work on a \"best effort\" approach. Please do your due diligence and verify the results of the conversion. We also recommend to run a python formatter (e.g. black) to format results in a sane manner.
usage: freqtrade strategy-updater [-h] [-v] [--no-color] [--logfile FILE] [-V]\n [-c PATH] [-d PATH] [--userdir PATH]\n [--strategy-list STRATEGY_LIST [STRATEGY_LIST ...]]\n [--strategy-path PATH]\n [--recursive-strategy-search]\n\noptions:\n -h, --help show this help message and exit\n --strategy-list STRATEGY_LIST [STRATEGY_LIST ...]\n Provide a space-separated list of strategies to\n backtest. Please note that timeframe needs to be set\n either in config or via command line. When using this\n together with `--export trades`, the strategy-name is\n injected into the filename (so `backtest-data.json`\n becomes `backtest-data-SampleStrategy.json`\n --strategy-path PATH Specify additional strategy lookup path.\n --recursive-strategy-search\n Recursively search for a strategy in the strategies\n folder.\n\nCommon arguments:\n -v, --verbose Verbose mode (-vv for more, -vvv to get all messages).\n --no-color Disable colorization of hyperopt results. May be\n useful if you are redirecting output to a file.\n --logfile FILE, --log-file FILE\n Log to the file specified. Special values are:\n 'syslog', 'journald'. See the documentation for more\n details.\n -V, --version show program's version number and exit\n -c PATH, --config PATH\n Specify configuration file (default:\n `userdir/config.json` or `config.json` whichever\n exists). Multiple --config options may be used. Can be\n set to `-` to read config from stdin.\n -d PATH, --datadir PATH, --data-dir PATH\n Path to the base directory of the exchange with\n historical backtesting data. To see futures data, use\n trading-mode additionally.\n --userdir PATH, --user-data-dir PATH\n Path to userdata directory.\nEnable webhooks by adding a webhook-section to your configuration file, and setting webhook.enabled to true.
Sample configuration (tested using IFTTT).
\"webhook\": {\n \"enabled\": true,\n \"url\": \"https://maker.ifttt.com/trigger/<YOUREVENT>/with/key/<YOURKEY>/\",\n \"entry\": {\n \"value1\": \"Buying {pair}\",\n \"value2\": \"limit {limit:8f}\",\n \"value3\": \"{stake_amount:8f} {stake_currency}\"\n },\n \"entry_cancel\": {\n \"value1\": \"Cancelling Open Buy Order for {pair}\",\n \"value2\": \"limit {limit:8f}\",\n \"value3\": \"{stake_amount:8f} {stake_currency}\"\n },\n \"entry_fill\": {\n \"value1\": \"Buy Order for {pair} filled\",\n \"value2\": \"at {open_rate:8f}\",\n \"value3\": \"\"\n },\n \"exit\": {\n \"value1\": \"Exiting {pair}\",\n \"value2\": \"limit {limit:8f}\",\n \"value3\": \"profit: {profit_amount:8f} {stake_currency} ({profit_ratio})\"\n },\n \"exit_cancel\": {\n \"value1\": \"Cancelling Open Exit Order for {pair}\",\n \"value2\": \"limit {limit:8f}\",\n \"value3\": \"profit: {profit_amount:8f} {stake_currency} ({profit_ratio})\"\n },\n \"exit_fill\": {\n \"value1\": \"Exit Order for {pair} filled\",\n \"value2\": \"at {close_rate:8f}.\",\n \"value3\": \"\"\n },\n \"status\": {\n \"value1\": \"Status: {status}\",\n \"value2\": \"\",\n \"value3\": \"\"\n }\n },\nThe url in webhook.url should point to the correct url for your webhook. If you're using IFTTT (as shown in the sample above) please insert your event and key to the url.
You can set the POST body format to Form-Encoded (default), JSON-Encoded, or raw data. Use \"format\": \"form\", \"format\": \"json\", or \"format\": \"raw\" respectively. Example configuration for Mattermost Cloud integration:
\"webhook\": {\n \"enabled\": true,\n \"url\": \"https://<YOURSUBDOMAIN>.cloud.mattermost.com/hooks/<YOURHOOK>\",\n \"format\": \"json\",\n \"status\": {\n \"text\": \"Status: {status}\"\n }\n },\nThe result would be a POST request with e.g. {\"text\":\"Status: running\"} body and Content-Type: application/json header which results Status: running message in the Mattermost channel.
When using the Form-Encoded or JSON-Encoded configuration you can configure any number of payload values, and both the key and value will be output in the POST request. However, when using the raw data format you can only configure one value and it must be named \"data\". In this instance the data key will not be output in the POST request, only the value. For example:
\"webhook\": {\n \"enabled\": true,\n \"url\": \"https://<YOURHOOKURL>\",\n \"format\": \"raw\",\n \"webhookstatus\": {\n \"data\": \"Status: {status}\"\n }\n },\nThe result would be a POST request with e.g. Status: running body and Content-Type: text/plain header.
Some webhook targets require a nested structure. This can be accomplished by setting the content as dictionary or list instead of as text directly.
This is only supported for the JSON format.
\"webhook\": {\n \"enabled\": true,\n \"url\": \"https://<yourhookurl>\",\n \"format\": \"json\",\n \"status\": {\n \"msgtype\": \"text\",\n \"text\": {\n \"content\": \"Status update: {status}\"\n }\n }\n}\nThe result would be a POST request with e.g. {\"msgtype\":\"text\",\"text\":{\"content\":\"Status update: running\"}} body and Content-Type: application/json header.
The webhook.retries parameter can be set for the maximum number of retries the webhook request should attempt if it is unsuccessful (i.e. HTTP response status is not 200). By default this is set to 0 which is disabled. An additional webhook.retry_delay parameter can be set to specify the time in seconds between retry attempts. By default this is set to 0.1 (i.e. 100ms). Note that increasing the number of retries or retry delay may slow down the trader if there are connectivity issues with the webhook. You can also specify webhook.timeout - which defines how long the bot will wait until it assumes the other host as unresponsive (defaults to 10s).
Example configuration for retries:
\"webhook\": {\n \"enabled\": true,\n \"url\": \"https://<YOURHOOKURL>\",\n \"timeout\": 10,\n \"retries\": 3,\n \"retry_delay\": 0.2,\n \"status\": {\n \"status\": \"Status: {status}\"\n }\n },\nCustom messages can be sent to Webhook endpoints via the self.dp.send_msg() function from within the strategy. To enable this, set the allow_custom_messages option to true:
\"webhook\": {\n \"enabled\": true,\n \"url\": \"https://<YOURHOOKURL>\",\n \"allow_custom_messages\": true,\n \"strategy_msg\": {\n \"status\": \"StrategyMessage: {msg}\"\n }\n },\nDifferent payloads can be configured for different events. Not all fields are necessary, but you should configure at least one of the dicts, otherwise the webhook will never be called.
"},{"location":"webhook-config/#webhook-message-types","title":"Webhook Message types","text":""},{"location":"webhook-config/#entry-entry-fill","title":"Entry / Entry fill","text":"The fields in webhook.entry and webhook.entry_fill are filled when the bot places a long/short Order to increase a position, or when that order fills respectively. Parameters are filled using string.format. Possible parameters are:
trade_idexchangepairdirectionleveragelimit # Deprecated - should no longer be used.open_rateamountopen_datestake_amountstake_currencybase_currencyquote_currencyfiat_currencyorder_typecurrent_rateenter_tagThe fields in webhook.entry_cancel are filled when the bot cancels a long/short order. Parameters are filled using string.format. Possible parameters are:
trade_idexchangepairdirectionleveragelimitamountopen_datestake_amountstake_currencybase_currencyquote_currencyfiat_currencyorder_typecurrent_rateenter_tagThe fields in webhook.exit and webhook.exit_fill are filled when the bot places an exit order, or when that exit order fills respectively. Parameters are filled using string.format. Possible parameters are:
trade_idexchangepairdirectionleveragegainamountopen_rateclose_ratecurrent_rateprofit_amountprofit_ratiostake_currencybase_currencyquote_currencyfiat_currencyenter_tagexit_reasonorder_typeopen_dateclose_datesub_tradeis_final_exitThe fields in webhook.exit_cancel are filled when the bot cancels a exit order. Parameters are filled using string.format. Possible parameters are:
trade_idexchangepairdirectionleveragegainorder_rateamountopen_ratecurrent_rateprofit_amountprofit_ratiostake_currencybase_currencyquote_currencyfiat_currencyexit_reasonorder_typeopen_dateclose_dateThe fields in webhook.status are used for regular status messages (Started / Stopped / ...). Parameters are filled using string.format.
The only possible value here is {status}.
A special form of webhooks is available for discord. You can configure this as follows:
\"discord\": {\n \"enabled\": true,\n \"webhook_url\": \"https://discord.com/api/webhooks/<Your webhook URL ...>\",\n \"exit_fill\": [\n {\"Trade ID\": \"{trade_id}\"},\n {\"Exchange\": \"{exchange}\"},\n {\"Pair\": \"{pair}\"},\n {\"Direction\": \"{direction}\"},\n {\"Open rate\": \"{open_rate}\"},\n {\"Close rate\": \"{close_rate}\"},\n {\"Amount\": \"{amount}\"},\n {\"Open date\": \"{open_date:%Y-%m-%d %H:%M:%S}\"},\n {\"Close date\": \"{close_date:%Y-%m-%d %H:%M:%S}\"},\n {\"Profit\": \"{profit_amount} {stake_currency}\"},\n {\"Profitability\": \"{profit_ratio:.2%}\"},\n {\"Enter tag\": \"{enter_tag}\"},\n {\"Exit Reason\": \"{exit_reason}\"},\n {\"Strategy\": \"{strategy}\"},\n {\"Timeframe\": \"{timeframe}\"},\n ],\n \"entry_fill\": [\n {\"Trade ID\": \"{trade_id}\"},\n {\"Exchange\": \"{exchange}\"},\n {\"Pair\": \"{pair}\"},\n {\"Direction\": \"{direction}\"},\n {\"Open rate\": \"{open_rate}\"},\n {\"Amount\": \"{amount}\"},\n {\"Open date\": \"{open_date:%Y-%m-%d %H:%M:%S}\"},\n {\"Enter tag\": \"{enter_tag}\"},\n {\"Strategy\": \"{strategy} {timeframe}\"},\n ]\n}\nThe above represents the default (exit_fill and entry_fill are optional and will default to the above configuration) - modifications are obviously possible. To disable either of the two default values (entry_fill / exit_fill), you can assign them an empty array (exit_fill: []).
Available fields correspond to the fields for webhooks and are documented in the corresponding webhook sections.
The notifications will look as follows by default.
Custom messages can be sent from a strategy to Discord endpoints via the dataprovider.send_msg() function. To enable this, set the allow_custom_messages option to true:
\"discord\": {\n \"enabled\": true,\n \"webhook_url\": \"https://discord.com/api/webhooks/<Your webhook URL ...>\",\n \"allow_custom_messages\": true,\n },\nWe strongly recommend that Windows users use Docker as this will work much easier and smoother (also more secure).
If that is not possible, try using the Windows Linux subsystem (WSL) - for which the Ubuntu instructions should work. Otherwise, please follow the instructions below.
All instructions assume that python 3.11+ is installed and available.
"},{"location":"windows_installation/#clone-the-git-repository","title":"Clone the git repository","text":"First of all clone the repository by running:
git clone https://github.com/freqtrade/freqtrade.git\nNow, choose your installation method, either automatically via script (recommended) or manually following the corresponding instructions.
"},{"location":"windows_installation/#install-freqtrade-automatically","title":"Install freqtrade automatically","text":""},{"location":"windows_installation/#run-the-installation-script","title":"Run the installation script","text":"The script will ask you a few questions to determine which parts should be installed.
Set-ExecutionPolicy -ExecutionPolicy Bypass\ncd freqtrade\n. .\\setup.ps1\n64bit Python version
Please make sure to use 64bit Windows and 64bit Python to avoid problems with backtesting or hyperopt due to the memory constraints 32bit applications have under Windows. 32bit python versions are no longer supported under Windows.
Hint
Using the Anaconda Distribution under Windows can greatly help with installation problems. Check out the Anaconda installation section in the documentation for more information.
"},{"location":"windows_installation/#error-during-installation-on-windows","title":"Error during installation on Windows","text":"error: Microsoft Visual C++ 14.0 is required. Get it with \"Microsoft Visual C++ Build Tools\": http://landinghub.visualstudio.com/visual-cpp-build-tools\nUnfortunately, many packages requiring compilation don't provide a pre-built wheel. It is therefore mandatory to have a C/C++ compiler installed and available for your python environment to use.
You can download the Visual C++ build tools from here and install \"Desktop development with C++\" in it's default configuration. Unfortunately, this is a heavy download / dependency so you might want to consider WSL2 or docker compose first.
"}]} \ No newline at end of file diff --git a/en/develop/stoploss/index.html b/en/develop/stoploss/index.html index 8845f370b..4bfb29331 100644 --- a/en/develop/stoploss/index.html +++ b/en/develop/stoploss/index.html @@ -1976,56 +1976,117 @@ Stoploss calculations do include fees, so a stoploss of -10% is placed exactly 1Stoploss on exchange is only supported for the following exchanges, and not all exchanges support both stop-limit and stop-market. The Order-type will be ignored if only one mode is available.
+| Exchange | -stop-loss type | +Mode | +Margin mode | +Stoploss type | |
|---|---|---|---|---|---|
| Binance | +Binance | +spot | +limit | ||
| Binance Futures | +Binance | +futures | +isolated, cross | market, limit | |
| Bingx | +Bingx | +spot | +market, limit | ||
| Bitget | +Bitmart | +spot | ++ | ❌ (not supported) | +|
| Bybit | +spot | ++ | ❌ (not supported) | +||
| Bybit | +futures | +isolated | market, limit | ||
| HTX | +Gate.io | +spot | +limit | ||
| kraken | +Gate.io | +futures | +isolated | +limit | +|
| HTX | +spot | ++ | limit | +||
| Hyperliquid | +spot | ++ | ❌ (not supported) | +||
| Hyperliquid | +futures | +isolated | +limit | +||
| Kraken | +spot | +market, limit | |||
| Gate | +OKX | +spot | +limit | ||
| Okx | +OKX | +futures | +isolated | limit | |
| Kucoin | -stop-limit, stop-market | +Bitvavo | +spot | ++ | ❌ (not supported) |
| Hyperliquid (futures only) | -limit | +Kucoin | +spot | ++ | market, limit |
Tight stoploss
Do not set too low/tight stoploss value when using stop loss on exchange!