Fix typos discovered by codespell

docs/advanced-backtesting.md

@@ -36,7 +36,7 @@ freqtrade backtesting-analysis -c <config.json> --analysis-groups 0 1 2 3 4 5
 ```
 
 This command will read from the last backtesting results. The `--analysis-groups` option is
-used to specify the various tabular outputs showing the profit fo each group or trade,
+used to specify the various tabular outputs showing the profit of each group or trade,
 ranging from the simplest (0) to the most detailed per pair, per buy and per sell tag (4):
 
 * 0: overall winrate and profit summary by enter_tag

docs/backtesting.md

@@ -587,7 +587,7 @@ These precision values are based on current exchange limits (as described in the
 
 ## Improved backtest accuracy
 
-One big limitation of backtesting is it's inability to know how prices moved intra-candle (was high before close, or viceversa?).
+One big limitation of backtesting is it's inability to know how prices moved intra-candle (was high before close, or vice-versa?).
 So assuming you run backtesting with a 1h timeframe, there will be 4 prices for that candle (Open, High, Low, Close).
 
 While backtesting does take some assumptions (read above) about this - this can never be perfect, and will always be biased in one way or the other.

docs/faq.md

@@ -2,7 +2,7 @@
 
 ## Supported Markets
 
-Freqtrade supports spot trading, as well as (isolated) futures trading for some selected exchanges. Please refer to the [documentation start page](index.md#supported-futures-exchanges-experimental) for an uptodate list of supported exchanges.
+Freqtrade supports spot trading, as well as (isolated) futures trading for some selected exchanges. Please refer to the [documentation start page](index.md#supported-futures-exchanges-experimental) for an up-to-date list of supported exchanges.
 
 ### Can my bot open short positions?
 
@@ -14,7 +14,7 @@ In spot markets, you can in some cases use leveraged spot tokens, which reflect
 
 ### Can my bot trade options or futures?
 
-Futures trading is supported for selected exchanges. Please refer to the [documentation start page](index.md#supported-futures-exchanges-experimental) for an uptodate list of supported exchanges.
+Futures trading is supported for selected exchanges. Please refer to the [documentation start page](index.md#supported-futures-exchanges-experimental) for an up-to-date list of supported exchanges.
 
 ## Beginner Tips & Tricks
 

docs/freqai-parameter-table.md

@@ -55,7 +55,7 @@ Mandatory parameters are marked as **Required** and have to be set in one of the
 |  |  **Data split parameters within the `freqai.data_split_parameters` sub dictionary**
 | `data_split_parameters` | Include any additional parameters available from scikit-learn `test_train_split()`, which are shown [here](https://scikit-learn.org/stable/modules/generated/sklearn.model_selection.train_test_split.html) (external website). <br> **Datatype:** Dictionary.
 | `test_size` | The fraction of data that should be used for testing instead of training. <br> **Datatype:** Positive float < 1.
-| `shuffle` | Shuffle the training data points during training. Typically, to not remove the chronological order of data in time-series forecasting, this is set to `False`. <br> **Datatype:** Boolean. <br> Defaut: `False`.
+| `shuffle` | Shuffle the training data points during training. Typically, to not remove the chronological order of data in time-series forecasting, this is set to `False`. <br> **Datatype:** Boolean. <br> Default: `False`.
 
 ### Model training parameters
 

docs/rest-api.md

@@ -454,7 +454,7 @@ To properly configure your reverse proxy (securely), please consult it's documen
 - **Caddy**: Caddy v2 supports websockets out of the box, see the [documentation](https://caddyserver.com/docs/v2-upgrade#proxy)
 
 !!! Tip "SSL certificates"
-    You can use tools like certbot to setup ssl certificates to access your bot's UI through encrypted connection by using any fo the above reverse proxies.
+    You can use tools like certbot to setup ssl certificates to access your bot's UI through encrypted connection by using any of the above reverse proxies.
     While this will protect your data in transit, we do not recommend to run the freqtrade API outside of your private network (VPN, SSH tunnel).
 
 ### OpenAPI interface

docs/stoploss.md

@@ -240,7 +240,7 @@ When using leverage, the same principle is applied - with stoploss defining the
 
 Therefore, a stoploss of 10% on a 10x trade would trigger on a 1% price move.
 If your stake amount (own capital) was 100$ - this trade would be 1000$ at 10x (after leverage).
-If price moves 1% - you've lost 10$ of your own capital - therfore stoploss will trigger in this case.
+If price moves 1% - you've lost 10$ of your own capital - therefore stoploss will trigger in this case.
 
 Make sure to be aware of this, and avoid using too tight stoploss (at 10x leverage, 10% risk may be too little to allow the trade to "breath" a little).
 

docs/strategy-advanced.md

@@ -326,4 +326,4 @@ for val in self.buy_ema_short.range:
 dataframe = pd.concat(frames, axis=1)
 ```
 
-Freqtrade does however also counter this by running `dataframe.copy()` on the dataframe right after the `populate_indicators()` method - so performance implications of this should be low to non-existant.
+Freqtrade does however also counter this by running `dataframe.copy()` on the dataframe right after the `populate_indicators()` method - so performance implications of this should be low to non-existent.

docs/strategy-customization.md

@@ -776,7 +776,7 @@ The orderbook structure is aligned with the order structure from [ccxt](https://
 Therefore, using `ob['bids'][0][0]` as demonstrated above will result in using the best bid price. `ob['bids'][0][1]` would look at the amount at this orderbook position.
 
 !!! Warning "Warning about backtesting"
-    The order book is not part of the historic data which means backtesting and hyperopt will not work correctly if this method is used, as the method will return uptodate values.
+    The order book is not part of the historic data which means backtesting and hyperopt will not work correctly if this method is used, as the method will return up-to-date values.
 
 ### *ticker(pair)*
 

docs/trade-object.md

@@ -126,7 +126,7 @@ An `Order` object will always be tied to it's corresponding [`Trade`](#trade-obj
 ### Order - Available attributes
 
 an Order object is typically attached to a trade.
-Most properties here can be None as they are dependant on the exchange response.
+Most properties here can be None as they are dependent on the exchange response.
 
 |  Attribute | DataType | Description |
 |------------|-------------|-------------|
@@ -141,7 +141,7 @@ Most properties here can be None as they are dependant on the exchange response.
 `amount` | float | Amount in base currency
 `filled` | float | Filled amount (in base currency)
 `remaining` | float | Remaining amount
-`cost` | float | Cost of the order - usually average * filled (*Exchange dependant on futures, may contain the cost with or without leverage and may be in contracts.*)
+`cost` | float | Cost of the order - usually average * filled (*Exchange dependent on futures, may contain the cost with or without leverage and may be in contracts.*)
 `stake_amount` | float | Stake amount used for this order. *Added in 2023.7.*
 `order_date` | datetime | Order creation date **use `order_date_utc` instead**
 `order_date_utc` | datetime | Order creation date (in UTC)